iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/pinctrl/mediatek/pinctrl-mt7622.c

804 lines
31 KiB
C
Raw Normal View History

pinctrl: mediatek: add pinctrl-mtk-common-v2 for all MediaTek pinctrls Irregular register arrangement and distinct logic access from various MediaTek SoCs would cause pinctrl-mtk-common to bloat and really hard to maintain in the future so that the patch creates pinctrl-mtk-common-v2 based on the core of mt7622-pinctrl. The goals pinctrl-mtk-common-v2 want to achieve are to hopefully support all of MediaTek SoCs, and two kinds of dt-bindings being supported, Linux generic pinctrl dt-binding mt7622 supports and MediaTek per-pin dt-binding the other SoCs support the MT8183 and MT6765 incline to make use of. The patch starts to refactor MT7622 pinctrl driver first with splitting out these portable ways from there such as table-based register operation and drive strength control that is common in both kinds of driver. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:17 +08:00
// SPDX-License-Identifier: GPL-2.0
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
/*
pinctrl: mediatek: add pinctrl-mtk-common-v2 for all MediaTek pinctrls Irregular register arrangement and distinct logic access from various MediaTek SoCs would cause pinctrl-mtk-common to bloat and really hard to maintain in the future so that the patch creates pinctrl-mtk-common-v2 based on the core of mt7622-pinctrl. The goals pinctrl-mtk-common-v2 want to achieve are to hopefully support all of MediaTek SoCs, and two kinds of dt-bindings being supported, Linux generic pinctrl dt-binding mt7622 supports and MediaTek per-pin dt-binding the other SoCs support the MT8183 and MT6765 incline to make use of. The patch starts to refactor MT7622 pinctrl driver first with splitting out these portable ways from there such as table-based register operation and drive strength control that is common in both kinds of driver. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:17 +08:00
* Copyright (C) 2017-2018 MediaTek Inc.
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
*
pinctrl: mediatek: add pinctrl-mtk-common-v2 for all MediaTek pinctrls Irregular register arrangement and distinct logic access from various MediaTek SoCs would cause pinctrl-mtk-common to bloat and really hard to maintain in the future so that the patch creates pinctrl-mtk-common-v2 based on the core of mt7622-pinctrl. The goals pinctrl-mtk-common-v2 want to achieve are to hopefully support all of MediaTek SoCs, and two kinds of dt-bindings being supported, Linux generic pinctrl dt-binding mt7622 supports and MediaTek per-pin dt-binding the other SoCs support the MT8183 and MT6765 incline to make use of. The patch starts to refactor MT7622 pinctrl driver first with splitting out these portable ways from there such as table-based register operation and drive strength control that is common in both kinds of driver. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:17 +08:00
* Author: Sean Wang <sean.wang@mediatek.com>
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
*
*/
pinctrl: mediatek: add pinctrl-moore that implements the generic pinctrl dt-bindings Add a generic driver pinctrl-moore.c for MT762x SoC and any other SoC that would like to use generic dt-binding. The patch is furtherly refactored from pinctrl-mt7622.c that totally uses the functions back by the generic pinctrl core such as GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS and its binding also completely follows up pinctrl-bindings.txt in Documentation/devicetree/bindings/pinctrl/ to implement. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:18 +08:00
#include "pinctrl-moore.h"
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
pinctrl: mediatek: extend struct mtk_pin_desc to pinctrl-mtk-common-v2.c This patch introduces a data structure mtk_pin_desc, which is used to provide information per pin characteristic such as driving current, eint number and a driving index, that is used to lookup table describing the details about the groups of driving current by which the pin is able to adjust the driving strength so that the driver could get the appropriate driving group when calls .pin_config_get()/set(). Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:20 +08:00
#define MT7622_PIN(_number, _name) \
MTK_PIN(_number, _name, _number, DRV_GRP0)
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
static const struct mtk_pin_field_calc mt7622_pin_mode_range[] = {
pinctrl: mediatek: extend struct mtk_pin_field_calc to pinctrl-mtk-common-v2.c This patch adds members sz_reg fixed in struct mtk_pin_field_calc - The 'fixed' is used to represent the consecutive pins share the same bits within the same register with the 1st pin so that it can largely reduce the entry size a bit. - The 'sz_reg' is used to indicate the range of bits we use in a register that may vary by SoC The above changes make the code more generic and this is useful as there might be other existing or future chips all use the same logic to access their register set and then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:19 +08:00
PIN_FIELD(0, 0, 0x320, 0x10, 16, 4),
PIN_FIELD(1, 4, 0x3a0, 0x10, 16, 4),
PIN_FIELD(5, 5, 0x320, 0x10, 0, 4),
PINS_FIELD(6, 7, 0x300, 0x10, 4, 4),
PIN_FIELD(8, 9, 0x350, 0x10, 20, 4),
PINS_FIELD(10, 13, 0x300, 0x10, 8, 4),
PIN_FIELD(14, 15, 0x320, 0x10, 4, 4),
PIN_FIELD(16, 17, 0x320, 0x10, 20, 4),
PIN_FIELD(18, 21, 0x310, 0x10, 16, 4),
PIN_FIELD(22, 22, 0x380, 0x10, 16, 4),
PINS_FIELD(23, 24, 0x300, 0x10, 24, 4),
PINS_FIELD(25, 36, 0x300, 0x10, 12, 4),
PINS_FIELD(37, 50, 0x300, 0x10, 20, 4),
PIN_FIELD(51, 70, 0x330, 0x10, 4, 4),
PINS_FIELD(71, 72, 0x300, 0x10, 16, 4),
PIN_FIELD(73, 76, 0x310, 0x10, 0, 4),
PIN_FIELD(77, 77, 0x320, 0x10, 28, 4),
PIN_FIELD(78, 78, 0x320, 0x10, 12, 4),
PIN_FIELD(79, 82, 0x3a0, 0x10, 0, 4),
PIN_FIELD(83, 83, 0x350, 0x10, 28, 4),
PIN_FIELD(84, 84, 0x330, 0x10, 0, 4),
PIN_FIELD(85, 90, 0x360, 0x10, 4, 4),
PIN_FIELD(91, 94, 0x390, 0x10, 16, 4),
PIN_FIELD(95, 97, 0x380, 0x10, 20, 4),
PIN_FIELD(98, 101, 0x390, 0x10, 0, 4),
PIN_FIELD(102, 102, 0x360, 0x10, 0, 4),
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
};
static const struct mtk_pin_field_calc mt7622_pin_dir_range[] = {
pinctrl: mediatek: extend struct mtk_pin_field_calc to pinctrl-mtk-common-v2.c This patch adds members sz_reg fixed in struct mtk_pin_field_calc - The 'fixed' is used to represent the consecutive pins share the same bits within the same register with the 1st pin so that it can largely reduce the entry size a bit. - The 'sz_reg' is used to indicate the range of bits we use in a register that may vary by SoC The above changes make the code more generic and this is useful as there might be other existing or future chips all use the same logic to access their register set and then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:19 +08:00
PIN_FIELD(0, 102, 0x0, 0x10, 0, 1),
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
};
static const struct mtk_pin_field_calc mt7622_pin_di_range[] = {
pinctrl: mediatek: extend struct mtk_pin_field_calc to pinctrl-mtk-common-v2.c This patch adds members sz_reg fixed in struct mtk_pin_field_calc - The 'fixed' is used to represent the consecutive pins share the same bits within the same register with the 1st pin so that it can largely reduce the entry size a bit. - The 'sz_reg' is used to indicate the range of bits we use in a register that may vary by SoC The above changes make the code more generic and this is useful as there might be other existing or future chips all use the same logic to access their register set and then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:19 +08:00
PIN_FIELD(0, 102, 0x200, 0x10, 0, 1),
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
};
static const struct mtk_pin_field_calc mt7622_pin_do_range[] = {
pinctrl: mediatek: extend struct mtk_pin_field_calc to pinctrl-mtk-common-v2.c This patch adds members sz_reg fixed in struct mtk_pin_field_calc - The 'fixed' is used to represent the consecutive pins share the same bits within the same register with the 1st pin so that it can largely reduce the entry size a bit. - The 'sz_reg' is used to indicate the range of bits we use in a register that may vary by SoC The above changes make the code more generic and this is useful as there might be other existing or future chips all use the same logic to access their register set and then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:19 +08:00
PIN_FIELD(0, 102, 0x100, 0x10, 0, 1),
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
};
static const struct mtk_pin_field_calc mt7622_pin_sr_range[] = {
pinctrl: mediatek: extend struct mtk_pin_field_calc to pinctrl-mtk-common-v2.c This patch adds members sz_reg fixed in struct mtk_pin_field_calc - The 'fixed' is used to represent the consecutive pins share the same bits within the same register with the 1st pin so that it can largely reduce the entry size a bit. - The 'sz_reg' is used to indicate the range of bits we use in a register that may vary by SoC The above changes make the code more generic and this is useful as there might be other existing or future chips all use the same logic to access their register set and then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:19 +08:00
PIN_FIELD(0, 31, 0x910, 0x10, 0, 1),
PIN_FIELD(32, 50, 0xa10, 0x10, 0, 1),
PIN_FIELD(51, 70, 0x810, 0x10, 0, 1),
PIN_FIELD(71, 72, 0xb10, 0x10, 0, 1),
PIN_FIELD(73, 86, 0xb10, 0x10, 4, 1),
PIN_FIELD(87, 90, 0xc10, 0x10, 0, 1),
PIN_FIELD(91, 102, 0xb10, 0x10, 18, 1),
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
};
static const struct mtk_pin_field_calc mt7622_pin_smt_range[] = {
pinctrl: mediatek: extend struct mtk_pin_field_calc to pinctrl-mtk-common-v2.c This patch adds members sz_reg fixed in struct mtk_pin_field_calc - The 'fixed' is used to represent the consecutive pins share the same bits within the same register with the 1st pin so that it can largely reduce the entry size a bit. - The 'sz_reg' is used to indicate the range of bits we use in a register that may vary by SoC The above changes make the code more generic and this is useful as there might be other existing or future chips all use the same logic to access their register set and then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:19 +08:00
PIN_FIELD(0, 31, 0x920, 0x10, 0, 1),
PIN_FIELD(32, 50, 0xa20, 0x10, 0, 1),
PIN_FIELD(51, 70, 0x820, 0x10, 0, 1),
PIN_FIELD(71, 72, 0xb20, 0x10, 0, 1),
PIN_FIELD(73, 86, 0xb20, 0x10, 4, 1),
PIN_FIELD(87, 90, 0xc20, 0x10, 0, 1),
PIN_FIELD(91, 102, 0xb20, 0x10, 18, 1),
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
};
static const struct mtk_pin_field_calc mt7622_pin_pu_range[] = {
pinctrl: mediatek: extend struct mtk_pin_field_calc to pinctrl-mtk-common-v2.c This patch adds members sz_reg fixed in struct mtk_pin_field_calc - The 'fixed' is used to represent the consecutive pins share the same bits within the same register with the 1st pin so that it can largely reduce the entry size a bit. - The 'sz_reg' is used to indicate the range of bits we use in a register that may vary by SoC The above changes make the code more generic and this is useful as there might be other existing or future chips all use the same logic to access their register set and then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:19 +08:00
PIN_FIELD(0, 31, 0x930, 0x10, 0, 1),
PIN_FIELD(32, 50, 0xa30, 0x10, 0, 1),
PIN_FIELD(51, 70, 0x830, 0x10, 0, 1),
PIN_FIELD(71, 72, 0xb30, 0x10, 0, 1),
PIN_FIELD(73, 86, 0xb30, 0x10, 4, 1),
PIN_FIELD(87, 90, 0xc30, 0x10, 0, 1),
PIN_FIELD(91, 102, 0xb30, 0x10, 18, 1),
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
};
static const struct mtk_pin_field_calc mt7622_pin_pd_range[] = {
pinctrl: mediatek: extend struct mtk_pin_field_calc to pinctrl-mtk-common-v2.c This patch adds members sz_reg fixed in struct mtk_pin_field_calc - The 'fixed' is used to represent the consecutive pins share the same bits within the same register with the 1st pin so that it can largely reduce the entry size a bit. - The 'sz_reg' is used to indicate the range of bits we use in a register that may vary by SoC The above changes make the code more generic and this is useful as there might be other existing or future chips all use the same logic to access their register set and then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:19 +08:00
PIN_FIELD(0, 31, 0x940, 0x10, 0, 1),
PIN_FIELD(32, 50, 0xa40, 0x10, 0, 1),
PIN_FIELD(51, 70, 0x840, 0x10, 0, 1),
PIN_FIELD(71, 72, 0xb40, 0x10, 0, 1),
PIN_FIELD(73, 86, 0xb40, 0x10, 4, 1),
PIN_FIELD(87, 90, 0xc40, 0x10, 0, 1),
PIN_FIELD(91, 102, 0xb40, 0x10, 18, 1),
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
};
static const struct mtk_pin_field_calc mt7622_pin_e4_range[] = {
pinctrl: mediatek: extend struct mtk_pin_field_calc to pinctrl-mtk-common-v2.c This patch adds members sz_reg fixed in struct mtk_pin_field_calc - The 'fixed' is used to represent the consecutive pins share the same bits within the same register with the 1st pin so that it can largely reduce the entry size a bit. - The 'sz_reg' is used to indicate the range of bits we use in a register that may vary by SoC The above changes make the code more generic and this is useful as there might be other existing or future chips all use the same logic to access their register set and then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:19 +08:00
PIN_FIELD(0, 31, 0x960, 0x10, 0, 1),
PIN_FIELD(32, 50, 0xa60, 0x10, 0, 1),
PIN_FIELD(51, 70, 0x860, 0x10, 0, 1),
PIN_FIELD(71, 72, 0xb60, 0x10, 0, 1),
PIN_FIELD(73, 86, 0xb60, 0x10, 4, 1),
PIN_FIELD(87, 90, 0xc60, 0x10, 0, 1),
PIN_FIELD(91, 102, 0xb60, 0x10, 18, 1),
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
};
static const struct mtk_pin_field_calc mt7622_pin_e8_range[] = {
pinctrl: mediatek: extend struct mtk_pin_field_calc to pinctrl-mtk-common-v2.c This patch adds members sz_reg fixed in struct mtk_pin_field_calc - The 'fixed' is used to represent the consecutive pins share the same bits within the same register with the 1st pin so that it can largely reduce the entry size a bit. - The 'sz_reg' is used to indicate the range of bits we use in a register that may vary by SoC The above changes make the code more generic and this is useful as there might be other existing or future chips all use the same logic to access their register set and then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:19 +08:00
PIN_FIELD(0, 31, 0x970, 0x10, 0, 1),
PIN_FIELD(32, 50, 0xa70, 0x10, 0, 1),
PIN_FIELD(51, 70, 0x870, 0x10, 0, 1),
PIN_FIELD(71, 72, 0xb70, 0x10, 0, 1),
PIN_FIELD(73, 86, 0xb70, 0x10, 4, 1),
PIN_FIELD(87, 90, 0xc70, 0x10, 0, 1),
PIN_FIELD(91, 102, 0xb70, 0x10, 18, 1),
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
};
static const struct mtk_pin_field_calc mt7622_pin_tdsel_range[] = {
pinctrl: mediatek: extend struct mtk_pin_field_calc to pinctrl-mtk-common-v2.c This patch adds members sz_reg fixed in struct mtk_pin_field_calc - The 'fixed' is used to represent the consecutive pins share the same bits within the same register with the 1st pin so that it can largely reduce the entry size a bit. - The 'sz_reg' is used to indicate the range of bits we use in a register that may vary by SoC The above changes make the code more generic and this is useful as there might be other existing or future chips all use the same logic to access their register set and then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:19 +08:00
PIN_FIELD(0, 31, 0x980, 0x4, 0, 4),
PIN_FIELD(32, 50, 0xa80, 0x4, 0, 4),
PIN_FIELD(51, 70, 0x880, 0x4, 0, 4),
PIN_FIELD(71, 72, 0xb80, 0x4, 0, 4),
PIN_FIELD(73, 86, 0xb80, 0x4, 16, 4),
PIN_FIELD(87, 90, 0xc80, 0x4, 0, 4),
PIN_FIELD(91, 102, 0xb88, 0x4, 8, 4),
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
};
static const struct mtk_pin_field_calc mt7622_pin_rdsel_range[] = {
pinctrl: mediatek: extend struct mtk_pin_field_calc to pinctrl-mtk-common-v2.c This patch adds members sz_reg fixed in struct mtk_pin_field_calc - The 'fixed' is used to represent the consecutive pins share the same bits within the same register with the 1st pin so that it can largely reduce the entry size a bit. - The 'sz_reg' is used to indicate the range of bits we use in a register that may vary by SoC The above changes make the code more generic and this is useful as there might be other existing or future chips all use the same logic to access their register set and then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:19 +08:00
PIN_FIELD(0, 31, 0x990, 0x4, 0, 6),
PIN_FIELD(32, 50, 0xa90, 0x4, 0, 6),
PIN_FIELD(51, 58, 0x890, 0x4, 0, 6),
PIN_FIELD(59, 60, 0x894, 0x4, 28, 6),
PIN_FIELD(61, 62, 0x894, 0x4, 16, 6),
PIN_FIELD(63, 66, 0x898, 0x4, 8, 6),
PIN_FIELD(67, 68, 0x89c, 0x4, 12, 6),
PIN_FIELD(69, 70, 0x89c, 0x4, 0, 6),
PIN_FIELD(71, 72, 0xb90, 0x4, 0, 6),
PIN_FIELD(73, 86, 0xb90, 0x4, 24, 6),
PIN_FIELD(87, 90, 0xc90, 0x4, 0, 6),
PIN_FIELD(91, 102, 0xb9c, 0x4, 12, 6),
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
};
static const struct mtk_pin_reg_calc mt7622_reg_cals[PINCTRL_PIN_REG_MAX] = {
[PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7622_pin_mode_range),
[PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7622_pin_dir_range),
[PINCTRL_PIN_REG_DI] = MTK_RANGE(mt7622_pin_di_range),
[PINCTRL_PIN_REG_DO] = MTK_RANGE(mt7622_pin_do_range),
[PINCTRL_PIN_REG_SR] = MTK_RANGE(mt7622_pin_sr_range),
[PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt7622_pin_smt_range),
[PINCTRL_PIN_REG_PU] = MTK_RANGE(mt7622_pin_pu_range),
[PINCTRL_PIN_REG_PD] = MTK_RANGE(mt7622_pin_pd_range),
[PINCTRL_PIN_REG_E4] = MTK_RANGE(mt7622_pin_e4_range),
[PINCTRL_PIN_REG_E8] = MTK_RANGE(mt7622_pin_e8_range),
[PINCTRL_PIN_REG_TDSEL] = MTK_RANGE(mt7622_pin_tdsel_range),
[PINCTRL_PIN_REG_RDSEL] = MTK_RANGE(mt7622_pin_rdsel_range),
};
pinctrl: mediatek: extend struct mtk_pin_desc to pinctrl-mtk-common-v2.c This patch introduces a data structure mtk_pin_desc, which is used to provide information per pin characteristic such as driving current, eint number and a driving index, that is used to lookup table describing the details about the groups of driving current by which the pin is able to adjust the driving strength so that the driver could get the appropriate driving group when calls .pin_config_get()/set(). Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:20 +08:00
static const struct mtk_pin_desc mt7622_pins[] = {
MT7622_PIN(0, "GPIO_A"),
MT7622_PIN(1, "I2S1_IN"),
MT7622_PIN(2, "I2S1_OUT"),
MT7622_PIN(3, "I2S_BCLK"),
MT7622_PIN(4, "I2S_WS"),
MT7622_PIN(5, "I2S_MCLK"),
MT7622_PIN(6, "TXD0"),
MT7622_PIN(7, "RXD0"),
MT7622_PIN(8, "SPI_WP"),
MT7622_PIN(9, "SPI_HOLD"),
MT7622_PIN(10, "SPI_CLK"),
MT7622_PIN(11, "SPI_MOSI"),
MT7622_PIN(12, "SPI_MISO"),
MT7622_PIN(13, "SPI_CS"),
MT7622_PIN(14, "I2C_SDA"),
MT7622_PIN(15, "I2C_SCL"),
MT7622_PIN(16, "I2S2_IN"),
MT7622_PIN(17, "I2S3_IN"),
MT7622_PIN(18, "I2S4_IN"),
MT7622_PIN(19, "I2S2_OUT"),
MT7622_PIN(20, "I2S3_OUT"),
MT7622_PIN(21, "I2S4_OUT"),
MT7622_PIN(22, "GPIO_B"),
MT7622_PIN(23, "MDC"),
MT7622_PIN(24, "MDIO"),
MT7622_PIN(25, "G2_TXD0"),
MT7622_PIN(26, "G2_TXD1"),
MT7622_PIN(27, "G2_TXD2"),
MT7622_PIN(28, "G2_TXD3"),
MT7622_PIN(29, "G2_TXEN"),
MT7622_PIN(30, "G2_TXC"),
MT7622_PIN(31, "G2_RXD0"),
MT7622_PIN(32, "G2_RXD1"),
MT7622_PIN(33, "G2_RXD2"),
MT7622_PIN(34, "G2_RXD3"),
MT7622_PIN(35, "G2_RXDV"),
MT7622_PIN(36, "G2_RXC"),
MT7622_PIN(37, "NCEB"),
MT7622_PIN(38, "NWEB"),
MT7622_PIN(39, "NREB"),
MT7622_PIN(40, "NDL4"),
MT7622_PIN(41, "NDL5"),
MT7622_PIN(42, "NDL6"),
MT7622_PIN(43, "NDL7"),
MT7622_PIN(44, "NRB"),
MT7622_PIN(45, "NCLE"),
MT7622_PIN(46, "NALE"),
MT7622_PIN(47, "NDL0"),
MT7622_PIN(48, "NDL1"),
MT7622_PIN(49, "NDL2"),
MT7622_PIN(50, "NDL3"),
MT7622_PIN(51, "MDI_TP_P0"),
MT7622_PIN(52, "MDI_TN_P0"),
MT7622_PIN(53, "MDI_RP_P0"),
MT7622_PIN(54, "MDI_RN_P0"),
MT7622_PIN(55, "MDI_TP_P1"),
MT7622_PIN(56, "MDI_TN_P1"),
MT7622_PIN(57, "MDI_RP_P1"),
MT7622_PIN(58, "MDI_RN_P1"),
MT7622_PIN(59, "MDI_RP_P2"),
MT7622_PIN(60, "MDI_RN_P2"),
MT7622_PIN(61, "MDI_TP_P2"),
MT7622_PIN(62, "MDI_TN_P2"),
MT7622_PIN(63, "MDI_TP_P3"),
MT7622_PIN(64, "MDI_TN_P3"),
MT7622_PIN(65, "MDI_RP_P3"),
MT7622_PIN(66, "MDI_RN_P3"),
MT7622_PIN(67, "MDI_RP_P4"),
MT7622_PIN(68, "MDI_RN_P4"),
MT7622_PIN(69, "MDI_TP_P4"),
MT7622_PIN(70, "MDI_TN_P4"),
MT7622_PIN(71, "PMIC_SCL"),
MT7622_PIN(72, "PMIC_SDA"),
MT7622_PIN(73, "SPIC1_CLK"),
MT7622_PIN(74, "SPIC1_MOSI"),
MT7622_PIN(75, "SPIC1_MISO"),
MT7622_PIN(76, "SPIC1_CS"),
MT7622_PIN(77, "GPIO_D"),
MT7622_PIN(78, "WATCHDOG"),
MT7622_PIN(79, "RTS3_N"),
MT7622_PIN(80, "CTS3_N"),
MT7622_PIN(81, "TXD3"),
MT7622_PIN(82, "RXD3"),
MT7622_PIN(83, "PERST0_N"),
MT7622_PIN(84, "PERST1_N"),
MT7622_PIN(85, "WLED_N"),
MT7622_PIN(86, "EPHY_LED0_N"),
MT7622_PIN(87, "AUXIN0"),
MT7622_PIN(88, "AUXIN1"),
MT7622_PIN(89, "AUXIN2"),
MT7622_PIN(90, "AUXIN3"),
MT7622_PIN(91, "TXD4"),
MT7622_PIN(92, "RXD4"),
MT7622_PIN(93, "RTS4_N"),
MT7622_PIN(94, "CTS4_N"),
MT7622_PIN(95, "PWM1"),
MT7622_PIN(96, "PWM2"),
MT7622_PIN(97, "PWM3"),
MT7622_PIN(98, "PWM4"),
MT7622_PIN(99, "PWM5"),
MT7622_PIN(100, "PWM6"),
MT7622_PIN(101, "PWM7"),
MT7622_PIN(102, "GPIO_E"),
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
};
/* List all groups consisting of these pins dedicated to the enablement of
* certain hardware block and the corresponding mode for all of the pins. The
* hardware probably has multiple combinations of these pinouts.
*/
/* EMMC */
static int mt7622_emmc_pins[] = { 40, 41, 42, 43, 44, 45, 47, 48, 49, 50, };
static int mt7622_emmc_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
static int mt7622_emmc_rst_pins[] = { 37, };
static int mt7622_emmc_rst_funcs[] = { 1, };
/* LED for EPHY */
static int mt7622_ephy_leds_pins[] = { 86, 91, 92, 93, 94, };
static int mt7622_ephy_leds_funcs[] = { 0, 0, 0, 0, 0, };
static int mt7622_ephy0_led_pins[] = { 86, };
static int mt7622_ephy0_led_funcs[] = { 0, };
static int mt7622_ephy1_led_pins[] = { 91, };
static int mt7622_ephy1_led_funcs[] = { 2, };
static int mt7622_ephy2_led_pins[] = { 92, };
static int mt7622_ephy2_led_funcs[] = { 2, };
static int mt7622_ephy3_led_pins[] = { 93, };
static int mt7622_ephy3_led_funcs[] = { 2, };
static int mt7622_ephy4_led_pins[] = { 94, };
static int mt7622_ephy4_led_funcs[] = { 2, };
/* Embedded Switch */
static int mt7622_esw_pins[] = { 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61,
62, 63, 64, 65, 66, 67, 68, 69, 70, };
static int mt7622_esw_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, };
static int mt7622_esw_p0_p1_pins[] = { 51, 52, 53, 54, 55, 56, 57, 58, };
static int mt7622_esw_p0_p1_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, };
static int mt7622_esw_p2_p3_p4_pins[] = { 59, 60, 61, 62, 63, 64, 65, 66, 67,
68, 69, 70, };
static int mt7622_esw_p2_p3_p4_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, };
/* RGMII via ESW */
static int mt7622_rgmii_via_esw_pins[] = { 59, 60, 61, 62, 63, 64, 65, 66,
67, 68, 69, 70, };
static int mt7622_rgmii_via_esw_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, };
/* RGMII via GMAC1 */
static int mt7622_rgmii_via_gmac1_pins[] = { 59, 60, 61, 62, 63, 64, 65, 66,
67, 68, 69, 70, };
static int mt7622_rgmii_via_gmac1_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, };
/* RGMII via GMAC2 */
static int mt7622_rgmii_via_gmac2_pins[] = { 25, 26, 27, 28, 29, 30, 31, 32,
33, 34, 35, 36, };
static int mt7622_rgmii_via_gmac2_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, };
/* I2C */
static int mt7622_i2c0_pins[] = { 14, 15, };
static int mt7622_i2c0_funcs[] = { 0, 0, };
static int mt7622_i2c1_0_pins[] = { 55, 56, };
static int mt7622_i2c1_0_funcs[] = { 0, 0, };
static int mt7622_i2c1_1_pins[] = { 73, 74, };
static int mt7622_i2c1_1_funcs[] = { 3, 3, };
static int mt7622_i2c1_2_pins[] = { 87, 88, };
static int mt7622_i2c1_2_funcs[] = { 0, 0, };
static int mt7622_i2c2_0_pins[] = { 57, 58, };
static int mt7622_i2c2_0_funcs[] = { 0, 0, };
static int mt7622_i2c2_1_pins[] = { 75, 76, };
static int mt7622_i2c2_1_funcs[] = { 3, 3, };
static int mt7622_i2c2_2_pins[] = { 89, 90, };
static int mt7622_i2c2_2_funcs[] = { 0, 0, };
/* I2S */
static int mt7622_i2s_in_mclk_bclk_ws_pins[] = { 3, 4, 5, };
static int mt7622_i2s_in_mclk_bclk_ws_funcs[] = { 3, 3, 0, };
static int mt7622_i2s1_in_data_pins[] = { 1, };
static int mt7622_i2s1_in_data_funcs[] = { 0, };
static int mt7622_i2s2_in_data_pins[] = { 16, };
static int mt7622_i2s2_in_data_funcs[] = { 0, };
static int mt7622_i2s3_in_data_pins[] = { 17, };
static int mt7622_i2s3_in_data_funcs[] = { 0, };
static int mt7622_i2s4_in_data_pins[] = { 18, };
static int mt7622_i2s4_in_data_funcs[] = { 0, };
static int mt7622_i2s_out_mclk_bclk_ws_pins[] = { 3, 4, 5, };
static int mt7622_i2s_out_mclk_bclk_ws_funcs[] = { 0, 0, 0, };
static int mt7622_i2s1_out_data_pins[] = { 2, };
static int mt7622_i2s1_out_data_funcs[] = { 0, };
static int mt7622_i2s2_out_data_pins[] = { 19, };
static int mt7622_i2s2_out_data_funcs[] = { 0, };
static int mt7622_i2s3_out_data_pins[] = { 20, };
static int mt7622_i2s3_out_data_funcs[] = { 0, };
static int mt7622_i2s4_out_data_pins[] = { 21, };
static int mt7622_i2s4_out_data_funcs[] = { 0, };
/* IR */
static int mt7622_ir_0_tx_pins[] = { 16, };
static int mt7622_ir_0_tx_funcs[] = { 4, };
static int mt7622_ir_1_tx_pins[] = { 59, };
static int mt7622_ir_1_tx_funcs[] = { 5, };
static int mt7622_ir_2_tx_pins[] = { 99, };
static int mt7622_ir_2_tx_funcs[] = { 3, };
static int mt7622_ir_0_rx_pins[] = { 17, };
static int mt7622_ir_0_rx_funcs[] = { 4, };
static int mt7622_ir_1_rx_pins[] = { 60, };
static int mt7622_ir_1_rx_funcs[] = { 5, };
static int mt7622_ir_2_rx_pins[] = { 100, };
static int mt7622_ir_2_rx_funcs[] = { 3, };
/* MDIO */
static int mt7622_mdc_mdio_pins[] = { 23, 24, };
static int mt7622_mdc_mdio_funcs[] = { 0, 0, };
/* PCIE */
static int mt7622_pcie0_0_waken_pins[] = { 14, };
static int mt7622_pcie0_0_waken_funcs[] = { 2, };
static int mt7622_pcie0_0_clkreq_pins[] = { 15, };
static int mt7622_pcie0_0_clkreq_funcs[] = { 2, };
static int mt7622_pcie0_1_waken_pins[] = { 79, };
static int mt7622_pcie0_1_waken_funcs[] = { 4, };
static int mt7622_pcie0_1_clkreq_pins[] = { 80, };
static int mt7622_pcie0_1_clkreq_funcs[] = { 4, };
static int mt7622_pcie1_0_waken_pins[] = { 14, };
static int mt7622_pcie1_0_waken_funcs[] = { 3, };
static int mt7622_pcie1_0_clkreq_pins[] = { 15, };
static int mt7622_pcie1_0_clkreq_funcs[] = { 3, };
static int mt7622_pcie0_pad_perst_pins[] = { 83, };
static int mt7622_pcie0_pad_perst_funcs[] = { 0, };
static int mt7622_pcie1_pad_perst_pins[] = { 84, };
static int mt7622_pcie1_pad_perst_funcs[] = { 0, };
/* PMIC bus */
static int mt7622_pmic_bus_pins[] = { 71, 72, };
static int mt7622_pmic_bus_funcs[] = { 0, 0, };
/* Parallel NAND */
static int mt7622_pnand_pins[] = { 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
48, 49, 50, };
static int mt7622_pnand_funcs[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, };
/* PWM */
static int mt7622_pwm_ch1_0_pins[] = { 51, };
static int mt7622_pwm_ch1_0_funcs[] = { 3, };
static int mt7622_pwm_ch1_1_pins[] = { 73, };
static int mt7622_pwm_ch1_1_funcs[] = { 4, };
static int mt7622_pwm_ch1_2_pins[] = { 95, };
static int mt7622_pwm_ch1_2_funcs[] = { 0, };
static int mt7622_pwm_ch2_0_pins[] = { 52, };
static int mt7622_pwm_ch2_0_funcs[] = { 3, };
static int mt7622_pwm_ch2_1_pins[] = { 74, };
static int mt7622_pwm_ch2_1_funcs[] = { 4, };
static int mt7622_pwm_ch2_2_pins[] = { 96, };
static int mt7622_pwm_ch2_2_funcs[] = { 0, };
static int mt7622_pwm_ch3_0_pins[] = { 53, };
static int mt7622_pwm_ch3_0_funcs[] = { 3, };
static int mt7622_pwm_ch3_1_pins[] = { 75, };
static int mt7622_pwm_ch3_1_funcs[] = { 4, };
static int mt7622_pwm_ch3_2_pins[] = { 97, };
static int mt7622_pwm_ch3_2_funcs[] = { 0, };
static int mt7622_pwm_ch4_0_pins[] = { 54, };
static int mt7622_pwm_ch4_0_funcs[] = { 3, };
static int mt7622_pwm_ch4_1_pins[] = { 67, };
static int mt7622_pwm_ch4_1_funcs[] = { 3, };
static int mt7622_pwm_ch4_2_pins[] = { 76, };
static int mt7622_pwm_ch4_2_funcs[] = { 4, };
static int mt7622_pwm_ch4_3_pins[] = { 98, };
static int mt7622_pwm_ch4_3_funcs[] = { 0, };
static int mt7622_pwm_ch5_0_pins[] = { 68, };
static int mt7622_pwm_ch5_0_funcs[] = { 3, };
static int mt7622_pwm_ch5_1_pins[] = { 77, };
static int mt7622_pwm_ch5_1_funcs[] = { 4, };
static int mt7622_pwm_ch5_2_pins[] = { 99, };
static int mt7622_pwm_ch5_2_funcs[] = { 0, };
static int mt7622_pwm_ch6_0_pins[] = { 69, };
static int mt7622_pwm_ch6_0_funcs[] = { 3, };
static int mt7622_pwm_ch6_1_pins[] = { 78, };
static int mt7622_pwm_ch6_1_funcs[] = { 4, };
static int mt7622_pwm_ch6_2_pins[] = { 81, };
static int mt7622_pwm_ch6_2_funcs[] = { 4, };
static int mt7622_pwm_ch6_3_pins[] = { 100, };
static int mt7622_pwm_ch6_3_funcs[] = { 0, };
static int mt7622_pwm_ch7_0_pins[] = { 70, };
static int mt7622_pwm_ch7_0_funcs[] = { 3, };
static int mt7622_pwm_ch7_1_pins[] = { 82, };
static int mt7622_pwm_ch7_1_funcs[] = { 4, };
static int mt7622_pwm_ch7_2_pins[] = { 101, };
static int mt7622_pwm_ch7_2_funcs[] = { 0, };
/* SD */
static int mt7622_sd_0_pins[] = { 16, 17, 18, 19, 20, 21, };
static int mt7622_sd_0_funcs[] = { 2, 2, 2, 2, 2, 2, };
static int mt7622_sd_1_pins[] = { 25, 26, 27, 28, 29, 30, };
static int mt7622_sd_1_funcs[] = { 2, 2, 2, 2, 2, 2, };
/* Serial NAND */
static int mt7622_snfi_pins[] = { 8, 9, 10, 11, 12, 13, };
static int mt7622_snfi_funcs[] = { 2, 2, 2, 2, 2, 2, };
/* SPI NOR */
static int mt7622_spi_pins[] = { 8, 9, 10, 11, 12, 13 };
static int mt7622_spi_funcs[] = { 0, 0, 0, 0, 0, 0, };
/* SPIC */
static int mt7622_spic0_0_pins[] = { 63, 64, 65, 66, };
static int mt7622_spic0_0_funcs[] = { 4, 4, 4, 4, };
static int mt7622_spic0_1_pins[] = { 79, 80, 81, 82, };
static int mt7622_spic0_1_funcs[] = { 3, 3, 3, 3, };
static int mt7622_spic1_0_pins[] = { 67, 68, 69, 70, };
static int mt7622_spic1_0_funcs[] = { 4, 4, 4, 4, };
static int mt7622_spic1_1_pins[] = { 73, 74, 75, 76, };
static int mt7622_spic1_1_funcs[] = { 0, 0, 0, 0, };
static int mt7622_spic2_0_pins[] = { 10, 11, 12, 13, };
static int mt7622_spic2_0_funcs[] = { 0, 0, 0, 0, };
static int mt7622_spic2_0_wp_hold_pins[] = { 8, 9, };
static int mt7622_spic2_0_wp_hold_funcs[] = { 0, 0, };
/* TDM */
static int mt7622_tdm_0_out_mclk_bclk_ws_pins[] = { 8, 9, 10, };
static int mt7622_tdm_0_out_mclk_bclk_ws_funcs[] = { 3, 3, 3, };
static int mt7622_tdm_0_in_mclk_bclk_ws_pins[] = { 11, 12, 13, };
static int mt7622_tdm_0_in_mclk_bclk_ws_funcs[] = { 3, 3, 3, };
static int mt7622_tdm_0_out_data_pins[] = { 20, };
static int mt7622_tdm_0_out_data_funcs[] = { 3, };
static int mt7622_tdm_0_in_data_pins[] = { 21, };
static int mt7622_tdm_0_in_data_funcs[] = { 3, };
static int mt7622_tdm_1_out_mclk_bclk_ws_pins[] = { 57, 58, 59, };
static int mt7622_tdm_1_out_mclk_bclk_ws_funcs[] = { 3, 3, 3, };
static int mt7622_tdm_1_in_mclk_bclk_ws_pins[] = { 60, 61, 62, };
static int mt7622_tdm_1_in_mclk_bclk_ws_funcs[] = { 3, 3, 3, };
static int mt7622_tdm_1_out_data_pins[] = { 55, };
static int mt7622_tdm_1_out_data_funcs[] = { 3, };
static int mt7622_tdm_1_in_data_pins[] = { 56, };
static int mt7622_tdm_1_in_data_funcs[] = { 3, };
/* UART */
static int mt7622_uart0_0_tx_rx_pins[] = { 6, 7, };
static int mt7622_uart0_0_tx_rx_funcs[] = { 0, 0, };
static int mt7622_uart1_0_tx_rx_pins[] = { 55, 56, };
static int mt7622_uart1_0_tx_rx_funcs[] = { 2, 2, };
static int mt7622_uart1_0_rts_cts_pins[] = { 57, 58, };
static int mt7622_uart1_0_rts_cts_funcs[] = { 2, 2, };
static int mt7622_uart1_1_tx_rx_pins[] = { 73, 74, };
static int mt7622_uart1_1_tx_rx_funcs[] = { 2, 2, };
static int mt7622_uart1_1_rts_cts_pins[] = { 75, 76, };
static int mt7622_uart1_1_rts_cts_funcs[] = { 2, 2, };
static int mt7622_uart2_0_tx_rx_pins[] = { 3, 4, };
static int mt7622_uart2_0_tx_rx_funcs[] = { 2, 2, };
static int mt7622_uart2_0_rts_cts_pins[] = { 1, 2, };
static int mt7622_uart2_0_rts_cts_funcs[] = { 2, 2, };
static int mt7622_uart2_1_tx_rx_pins[] = { 51, 52, };
static int mt7622_uart2_1_tx_rx_funcs[] = { 0, 0, };
static int mt7622_uart2_1_rts_cts_pins[] = { 53, 54, };
static int mt7622_uart2_1_rts_cts_funcs[] = { 0, 0, };
static int mt7622_uart2_2_tx_rx_pins[] = { 59, 60, };
static int mt7622_uart2_2_tx_rx_funcs[] = { 4, 4, };
static int mt7622_uart2_2_rts_cts_pins[] = { 61, 62, };
static int mt7622_uart2_2_rts_cts_funcs[] = { 4, 4, };
static int mt7622_uart2_3_tx_rx_pins[] = { 95, 96, };
static int mt7622_uart2_3_tx_rx_funcs[] = { 3, 3, };
static int mt7622_uart3_0_tx_rx_pins[] = { 57, 58, };
static int mt7622_uart3_0_tx_rx_funcs[] = { 5, 5, };
static int mt7622_uart3_1_tx_rx_pins[] = { 81, 82, };
static int mt7622_uart3_1_tx_rx_funcs[] = { 0, 0, };
static int mt7622_uart3_1_rts_cts_pins[] = { 79, 80, };
static int mt7622_uart3_1_rts_cts_funcs[] = { 0, 0, };
static int mt7622_uart4_0_tx_rx_pins[] = { 61, 62, };
static int mt7622_uart4_0_tx_rx_funcs[] = { 5, 5, };
static int mt7622_uart4_1_tx_rx_pins[] = { 91, 92, };
static int mt7622_uart4_1_tx_rx_funcs[] = { 0, 0, };
static int mt7622_uart4_1_rts_cts_pins[] = { 93, 94 };
static int mt7622_uart4_1_rts_cts_funcs[] = { 0, 0, };
static int mt7622_uart4_2_tx_rx_pins[] = { 97, 98, };
static int mt7622_uart4_2_tx_rx_funcs[] = { 2, 2, };
static int mt7622_uart4_2_rts_cts_pins[] = { 95, 96 };
static int mt7622_uart4_2_rts_cts_funcs[] = { 2, 2, };
/* Watchdog */
static int mt7622_watchdog_pins[] = { 78, };
static int mt7622_watchdog_funcs[] = { 0, };
/* WLAN LED */
static int mt7622_wled_pins[] = { 85, };
static int mt7622_wled_funcs[] = { 0, };
static const struct group_desc mt7622_groups[] = {
PINCTRL_PIN_GROUP("emmc", mt7622_emmc),
PINCTRL_PIN_GROUP("emmc_rst", mt7622_emmc_rst),
PINCTRL_PIN_GROUP("ephy_leds", mt7622_ephy_leds),
PINCTRL_PIN_GROUP("ephy0_led", mt7622_ephy0_led),
PINCTRL_PIN_GROUP("ephy1_led", mt7622_ephy1_led),
PINCTRL_PIN_GROUP("ephy2_led", mt7622_ephy2_led),
PINCTRL_PIN_GROUP("ephy3_led", mt7622_ephy3_led),
PINCTRL_PIN_GROUP("ephy4_led", mt7622_ephy4_led),
PINCTRL_PIN_GROUP("esw", mt7622_esw),
PINCTRL_PIN_GROUP("esw_p0_p1", mt7622_esw_p0_p1),
PINCTRL_PIN_GROUP("esw_p2_p3_p4", mt7622_esw_p2_p3_p4),
PINCTRL_PIN_GROUP("rgmii_via_esw", mt7622_rgmii_via_esw),
PINCTRL_PIN_GROUP("rgmii_via_gmac1", mt7622_rgmii_via_gmac1),
PINCTRL_PIN_GROUP("rgmii_via_gmac2", mt7622_rgmii_via_gmac2),
PINCTRL_PIN_GROUP("i2c0", mt7622_i2c0),
PINCTRL_PIN_GROUP("i2c1_0", mt7622_i2c1_0),
PINCTRL_PIN_GROUP("i2c1_1", mt7622_i2c1_1),
PINCTRL_PIN_GROUP("i2c1_2", mt7622_i2c1_2),
PINCTRL_PIN_GROUP("i2c2_0", mt7622_i2c2_0),
PINCTRL_PIN_GROUP("i2c2_1", mt7622_i2c2_1),
PINCTRL_PIN_GROUP("i2c2_2", mt7622_i2c2_2),
PINCTRL_PIN_GROUP("i2s_out_mclk_bclk_ws", mt7622_i2s_out_mclk_bclk_ws),
PINCTRL_PIN_GROUP("i2s_in_mclk_bclk_ws", mt7622_i2s_in_mclk_bclk_ws),
PINCTRL_PIN_GROUP("i2s1_in_data", mt7622_i2s1_in_data),
PINCTRL_PIN_GROUP("i2s2_in_data", mt7622_i2s2_in_data),
PINCTRL_PIN_GROUP("i2s3_in_data", mt7622_i2s3_in_data),
PINCTRL_PIN_GROUP("i2s4_in_data", mt7622_i2s4_in_data),
PINCTRL_PIN_GROUP("i2s1_out_data", mt7622_i2s1_out_data),
PINCTRL_PIN_GROUP("i2s2_out_data", mt7622_i2s2_out_data),
PINCTRL_PIN_GROUP("i2s3_out_data", mt7622_i2s3_out_data),
PINCTRL_PIN_GROUP("i2s4_out_data", mt7622_i2s4_out_data),
PINCTRL_PIN_GROUP("ir_0_tx", mt7622_ir_0_tx),
PINCTRL_PIN_GROUP("ir_1_tx", mt7622_ir_1_tx),
PINCTRL_PIN_GROUP("ir_2_tx", mt7622_ir_2_tx),
PINCTRL_PIN_GROUP("ir_0_rx", mt7622_ir_0_rx),
PINCTRL_PIN_GROUP("ir_1_rx", mt7622_ir_1_rx),
PINCTRL_PIN_GROUP("ir_2_rx", mt7622_ir_2_rx),
PINCTRL_PIN_GROUP("mdc_mdio", mt7622_mdc_mdio),
PINCTRL_PIN_GROUP("pcie0_0_waken", mt7622_pcie0_0_waken),
PINCTRL_PIN_GROUP("pcie0_0_clkreq", mt7622_pcie0_0_clkreq),
PINCTRL_PIN_GROUP("pcie0_1_waken", mt7622_pcie0_1_waken),
PINCTRL_PIN_GROUP("pcie0_1_clkreq", mt7622_pcie0_1_clkreq),
PINCTRL_PIN_GROUP("pcie1_0_waken", mt7622_pcie1_0_waken),
PINCTRL_PIN_GROUP("pcie1_0_clkreq", mt7622_pcie1_0_clkreq),
PINCTRL_PIN_GROUP("pcie0_pad_perst", mt7622_pcie0_pad_perst),
PINCTRL_PIN_GROUP("pcie1_pad_perst", mt7622_pcie1_pad_perst),
PINCTRL_PIN_GROUP("par_nand", mt7622_pnand),
PINCTRL_PIN_GROUP("pmic_bus", mt7622_pmic_bus),
PINCTRL_PIN_GROUP("pwm_ch1_0", mt7622_pwm_ch1_0),
PINCTRL_PIN_GROUP("pwm_ch1_1", mt7622_pwm_ch1_1),
PINCTRL_PIN_GROUP("pwm_ch1_2", mt7622_pwm_ch1_2),
PINCTRL_PIN_GROUP("pwm_ch2_0", mt7622_pwm_ch2_0),
PINCTRL_PIN_GROUP("pwm_ch2_1", mt7622_pwm_ch2_1),
PINCTRL_PIN_GROUP("pwm_ch2_2", mt7622_pwm_ch2_2),
PINCTRL_PIN_GROUP("pwm_ch3_0", mt7622_pwm_ch3_0),
PINCTRL_PIN_GROUP("pwm_ch3_1", mt7622_pwm_ch3_1),
PINCTRL_PIN_GROUP("pwm_ch3_2", mt7622_pwm_ch3_2),
PINCTRL_PIN_GROUP("pwm_ch4_0", mt7622_pwm_ch4_0),
PINCTRL_PIN_GROUP("pwm_ch4_1", mt7622_pwm_ch4_1),
PINCTRL_PIN_GROUP("pwm_ch4_2", mt7622_pwm_ch4_2),
PINCTRL_PIN_GROUP("pwm_ch4_3", mt7622_pwm_ch4_3),
PINCTRL_PIN_GROUP("pwm_ch5_0", mt7622_pwm_ch5_0),
PINCTRL_PIN_GROUP("pwm_ch5_1", mt7622_pwm_ch5_1),
PINCTRL_PIN_GROUP("pwm_ch5_2", mt7622_pwm_ch5_2),
PINCTRL_PIN_GROUP("pwm_ch6_0", mt7622_pwm_ch6_0),
PINCTRL_PIN_GROUP("pwm_ch6_1", mt7622_pwm_ch6_1),
PINCTRL_PIN_GROUP("pwm_ch6_2", mt7622_pwm_ch6_2),
PINCTRL_PIN_GROUP("pwm_ch6_3", mt7622_pwm_ch6_3),
PINCTRL_PIN_GROUP("pwm_ch7_0", mt7622_pwm_ch7_0),
PINCTRL_PIN_GROUP("pwm_ch7_1", mt7622_pwm_ch7_1),
PINCTRL_PIN_GROUP("pwm_ch7_2", mt7622_pwm_ch7_2),
PINCTRL_PIN_GROUP("sd_0", mt7622_sd_0),
PINCTRL_PIN_GROUP("sd_1", mt7622_sd_1),
PINCTRL_PIN_GROUP("snfi", mt7622_snfi),
PINCTRL_PIN_GROUP("spi_nor", mt7622_spi),
PINCTRL_PIN_GROUP("spic0_0", mt7622_spic0_0),
PINCTRL_PIN_GROUP("spic0_1", mt7622_spic0_1),
PINCTRL_PIN_GROUP("spic1_0", mt7622_spic1_0),
PINCTRL_PIN_GROUP("spic1_1", mt7622_spic1_1),
PINCTRL_PIN_GROUP("spic2_0", mt7622_spic2_0),
PINCTRL_PIN_GROUP("spic2_0_wp_hold", mt7622_spic2_0_wp_hold),
PINCTRL_PIN_GROUP("tdm_0_out_mclk_bclk_ws",
mt7622_tdm_0_out_mclk_bclk_ws),
PINCTRL_PIN_GROUP("tdm_0_in_mclk_bclk_ws",
mt7622_tdm_0_in_mclk_bclk_ws),
PINCTRL_PIN_GROUP("tdm_0_out_data", mt7622_tdm_0_out_data),
PINCTRL_PIN_GROUP("tdm_0_in_data", mt7622_tdm_0_in_data),
PINCTRL_PIN_GROUP("tdm_1_out_mclk_bclk_ws",
mt7622_tdm_1_out_mclk_bclk_ws),
PINCTRL_PIN_GROUP("tdm_1_in_mclk_bclk_ws",
mt7622_tdm_1_in_mclk_bclk_ws),
PINCTRL_PIN_GROUP("tdm_1_out_data", mt7622_tdm_1_out_data),
PINCTRL_PIN_GROUP("tdm_1_in_data", mt7622_tdm_1_in_data),
PINCTRL_PIN_GROUP("uart0_0_tx_rx", mt7622_uart0_0_tx_rx),
PINCTRL_PIN_GROUP("uart1_0_tx_rx", mt7622_uart1_0_tx_rx),
PINCTRL_PIN_GROUP("uart1_0_rts_cts", mt7622_uart1_0_rts_cts),
PINCTRL_PIN_GROUP("uart1_1_tx_rx", mt7622_uart1_1_tx_rx),
PINCTRL_PIN_GROUP("uart1_1_rts_cts", mt7622_uart1_1_rts_cts),
PINCTRL_PIN_GROUP("uart2_0_tx_rx", mt7622_uart2_0_tx_rx),
PINCTRL_PIN_GROUP("uart2_0_rts_cts", mt7622_uart2_0_rts_cts),
PINCTRL_PIN_GROUP("uart2_1_tx_rx", mt7622_uart2_1_tx_rx),
PINCTRL_PIN_GROUP("uart2_1_rts_cts", mt7622_uart2_1_rts_cts),
PINCTRL_PIN_GROUP("uart2_2_tx_rx", mt7622_uart2_2_tx_rx),
PINCTRL_PIN_GROUP("uart2_2_rts_cts", mt7622_uart2_2_rts_cts),
PINCTRL_PIN_GROUP("uart2_3_tx_rx", mt7622_uart2_3_tx_rx),
PINCTRL_PIN_GROUP("uart3_0_tx_rx", mt7622_uart3_0_tx_rx),
PINCTRL_PIN_GROUP("uart3_1_tx_rx", mt7622_uart3_1_tx_rx),
PINCTRL_PIN_GROUP("uart3_1_rts_cts", mt7622_uart3_1_rts_cts),
PINCTRL_PIN_GROUP("uart4_0_tx_rx", mt7622_uart4_0_tx_rx),
PINCTRL_PIN_GROUP("uart4_1_tx_rx", mt7622_uart4_1_tx_rx),
PINCTRL_PIN_GROUP("uart4_1_rts_cts", mt7622_uart4_1_rts_cts),
PINCTRL_PIN_GROUP("uart4_2_tx_rx", mt7622_uart4_2_tx_rx),
PINCTRL_PIN_GROUP("uart4_2_rts_cts", mt7622_uart4_2_rts_cts),
PINCTRL_PIN_GROUP("watchdog", mt7622_watchdog),
PINCTRL_PIN_GROUP("wled", mt7622_wled),
};
/* Joint those groups owning the same capability in user point of view which
* allows that people tend to use through the device tree.
*/
static const char *mt7622_emmc_groups[] = { "emmc", "emmc_rst", };
static const char *mt7622_ethernet_groups[] = { "esw", "esw_p0_p1",
"esw_p2_p3_p4", "mdc_mdio",
"rgmii_via_gmac1",
"rgmii_via_gmac2",
"rgmii_via_esw", };
static const char *mt7622_i2c_groups[] = { "i2c0", "i2c1_0", "i2c1_1",
"i2c1_2", "i2c2_0", "i2c2_1",
"i2c2_2", };
static const char *mt7622_i2s_groups[] = { "i2s_out_mclk_bclk_ws",
"i2s_in_mclk_bclk_ws",
"i2s1_in_data", "i2s2_in_data",
"i2s3_in_data", "i2s4_in_data",
"i2s1_out_data", "i2s2_out_data",
"i2s3_out_data", "i2s4_out_data", };
static const char *mt7622_ir_groups[] = { "ir_0_tx", "ir_1_tx", "ir_2_tx",
"ir_0_rx", "ir_1_rx", "ir_2_rx"};
static const char *mt7622_led_groups[] = { "ephy_leds", "ephy0_led",
"ephy1_led", "ephy2_led",
"ephy3_led", "ephy4_led",
"wled", };
static const char *mt7622_flash_groups[] = { "par_nand", "snfi", "spi_nor"};
static const char *mt7622_pcie_groups[] = { "pcie0_0_waken", "pcie0_0_clkreq",
"pcie0_1_waken", "pcie0_1_clkreq",
"pcie1_0_waken", "pcie1_0_clkreq",
"pcie0_pad_perst",
"pcie1_pad_perst", };
static const char *mt7622_pmic_bus_groups[] = { "pmic_bus", };
static const char *mt7622_pwm_groups[] = { "pwm_ch1_0", "pwm_ch1_1",
"pwm_ch1_2", "pwm_ch2_0",
"pwm_ch2_1", "pwm_ch2_2",
"pwm_ch3_0", "pwm_ch3_1",
"pwm_ch3_2", "pwm_ch4_0",
"pwm_ch4_1", "pwm_ch4_2",
"pwm_ch4_3", "pwm_ch5_0",
"pwm_ch5_1", "pwm_ch5_2",
"pwm_ch6_0", "pwm_ch6_1",
"pwm_ch6_2", "pwm_ch6_3",
"pwm_ch7_0", "pwm_ch7_1",
"pwm_ch7_2", };
static const char *mt7622_sd_groups[] = { "sd_0", "sd_1", };
static const char *mt7622_spic_groups[] = { "spic0_0", "spic0_1", "spic1_0",
"spic1_1", "spic2_0",
"spic2_0_wp_hold", };
static const char *mt7622_tdm_groups[] = { "tdm_0_out_mclk_bclk_ws",
"tdm_0_in_mclk_bclk_ws",
"tdm_0_out_data",
"tdm_0_in_data",
"tdm_1_out_mclk_bclk_ws",
"tdm_1_in_mclk_bclk_ws",
"tdm_1_out_data",
"tdm_1_in_data", };
static const char *mt7622_uart_groups[] = { "uart0_0_tx_rx",
"uart1_0_tx_rx", "uart1_0_rts_cts",
"uart1_1_tx_rx", "uart1_1_rts_cts",
"uart2_0_tx_rx", "uart2_0_rts_cts",
"uart2_1_tx_rx", "uart2_1_rts_cts",
"uart2_2_tx_rx", "uart2_2_rts_cts",
"uart2_3_tx_rx",
"uart3_0_tx_rx",
"uart3_1_tx_rx", "uart3_1_rts_cts",
"uart4_0_tx_rx",
"uart4_1_tx_rx", "uart4_1_rts_cts",
"uart4_2_tx_rx",
"uart4_2_rts_cts",};
static const char *mt7622_wdt_groups[] = { "watchdog", };
static const struct function_desc mt7622_functions[] = {
{"emmc", mt7622_emmc_groups, ARRAY_SIZE(mt7622_emmc_groups)},
{"eth", mt7622_ethernet_groups, ARRAY_SIZE(mt7622_ethernet_groups)},
{"i2c", mt7622_i2c_groups, ARRAY_SIZE(mt7622_i2c_groups)},
{"i2s", mt7622_i2s_groups, ARRAY_SIZE(mt7622_i2s_groups)},
{"ir", mt7622_ir_groups, ARRAY_SIZE(mt7622_ir_groups)},
{"led", mt7622_led_groups, ARRAY_SIZE(mt7622_led_groups)},
{"flash", mt7622_flash_groups, ARRAY_SIZE(mt7622_flash_groups)},
{"pcie", mt7622_pcie_groups, ARRAY_SIZE(mt7622_pcie_groups)},
{"pmic", mt7622_pmic_bus_groups, ARRAY_SIZE(mt7622_pmic_bus_groups)},
{"pwm", mt7622_pwm_groups, ARRAY_SIZE(mt7622_pwm_groups)},
{"sd", mt7622_sd_groups, ARRAY_SIZE(mt7622_sd_groups)},
{"spi", mt7622_spic_groups, ARRAY_SIZE(mt7622_spic_groups)},
{"tdm", mt7622_tdm_groups, ARRAY_SIZE(mt7622_tdm_groups)},
{"uart", mt7622_uart_groups, ARRAY_SIZE(mt7622_uart_groups)},
{"watchdog", mt7622_wdt_groups, ARRAY_SIZE(mt7622_wdt_groups)},
};
pinctrl: mediatek: add EINT support to MT7622 SoC Add EINT support to MT7622 SoC and the support is made as just an option to MT7622 pinctrl. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-21 01:01:49 +08:00
static const struct mtk_eint_hw mt7622_eint_hw = {
.port_mask = 7,
.ports = 7,
.ap_num = ARRAY_SIZE(mt7622_pins),
.db_cnt = 20,
};
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
static const struct mtk_pin_soc mt7622_data = {
.reg_cal = mt7622_reg_cals,
pinctrl: mediatek: extend struct mtk_pin_desc to pinctrl-mtk-common-v2.c This patch introduces a data structure mtk_pin_desc, which is used to provide information per pin characteristic such as driving current, eint number and a driving index, that is used to lookup table describing the details about the groups of driving current by which the pin is able to adjust the driving strength so that the driver could get the appropriate driving group when calls .pin_config_get()/set(). Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:20 +08:00
.pins = (const struct pinctrl_pin_desc *)mt7622_pins,
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
.npins = ARRAY_SIZE(mt7622_pins),
.grps = mt7622_groups,
.ngrps = ARRAY_SIZE(mt7622_groups),
.funcs = mt7622_functions,
.nfuncs = ARRAY_SIZE(mt7622_functions),
pinctrl: mediatek: add EINT support to MT7622 SoC Add EINT support to MT7622 SoC and the support is made as just an option to MT7622 pinctrl. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-21 01:01:49 +08:00
.eint_hw = &mt7622_eint_hw,
pinctrl: mediatek: extend struct mtk_pin_soc to pinctrl-mtk-common-v2.c Add two parameters gpio_m and eint_m for configuring GPIO mode and EINT mode, they might be varying depend on SoC. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:21 +08:00
.gpio_m = 1,
.eint_m = 1,
pinctrl: mediatek: add ies register support to pinctrl-mtk-common-v2.c Certain SoCs have to program an extra IES register to configure input enabled mode so that we add it in the existing path as an option. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:26 +08:00
.ies_present = false,
pinctrl: mediatek: add multiple register bases support to pinctrl-mtk-common-v2.c Certain SoC own multiple register base for accessing each pin groups, it's easy to be done with extend struct mtk_pin_field_calc to support the kind of SoC such as MT8183. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:30 +08:00
.base_names = mtk_default_register_base_names,
.nbase_names = ARRAY_SIZE(mtk_default_register_base_names),
pinctrl: mediatek: add pull related support to pinctrl-mtk-common-v2.c Put pull control support related functions to pinctrl-mtk-common-v2.c as these operations might be different by chips and allow different type of driver to reuse them. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:24 +08:00
.bias_disable_set = mtk_pinconf_bias_disable_set,
.bias_disable_get = mtk_pinconf_bias_disable_get,
.bias_set = mtk_pinconf_bias_set,
.bias_get = mtk_pinconf_bias_get,
pinctrl: mediatek: add driving strength related support to pinctrl-mtk-common-v2.c Put driving strength support related functions to pinctrl-mtk-common-v2.c as these operations might be different by chips and allow different type of driver to reuse them. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:22 +08:00
.drive_set = mtk_pinconf_drive_set,
.drive_get = mtk_pinconf_drive_get,
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
};
pinctrl: mediatek: add pinctrl-moore that implements the generic pinctrl dt-bindings Add a generic driver pinctrl-moore.c for MT762x SoC and any other SoC that would like to use generic dt-binding. The patch is furtherly refactored from pinctrl-mt7622.c that totally uses the functions back by the generic pinctrl core such as GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS and its binding also completely follows up pinctrl-bindings.txt in Documentation/devicetree/bindings/pinctrl/ to implement. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:18 +08:00
static const struct of_device_id mt7622_pinctrl_of_match[] = {
{ .compatible = "mediatek,mt7622-pinctrl", },
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
{ }
};
pinctrl: mediatek: add pinctrl-moore that implements the generic pinctrl dt-bindings Add a generic driver pinctrl-moore.c for MT762x SoC and any other SoC that would like to use generic dt-binding. The patch is furtherly refactored from pinctrl-mt7622.c that totally uses the functions back by the generic pinctrl core such as GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS and its binding also completely follows up pinctrl-bindings.txt in Documentation/devicetree/bindings/pinctrl/ to implement. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:18 +08:00
static int mt7622_pinctrl_probe(struct platform_device *pdev)
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
{
pinctrl: mediatek: add pinctrl-moore that implements the generic pinctrl dt-bindings Add a generic driver pinctrl-moore.c for MT762x SoC and any other SoC that would like to use generic dt-binding. The patch is furtherly refactored from pinctrl-mt7622.c that totally uses the functions back by the generic pinctrl core such as GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS and its binding also completely follows up pinctrl-bindings.txt in Documentation/devicetree/bindings/pinctrl/ to implement. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:18 +08:00
return mtk_moore_pinctrl_probe(pdev, &mt7622_data);
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
}
pinctrl: mediatek: add pinctrl-moore that implements the generic pinctrl dt-bindings Add a generic driver pinctrl-moore.c for MT762x SoC and any other SoC that would like to use generic dt-binding. The patch is furtherly refactored from pinctrl-mt7622.c that totally uses the functions back by the generic pinctrl core such as GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS and its binding also completely follows up pinctrl-bindings.txt in Documentation/devicetree/bindings/pinctrl/ to implement. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:18 +08:00
static struct platform_driver mt7622_pinctrl_driver = {
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
.driver = {
pinctrl: mediatek: add pinctrl-moore that implements the generic pinctrl dt-bindings Add a generic driver pinctrl-moore.c for MT762x SoC and any other SoC that would like to use generic dt-binding. The patch is furtherly refactored from pinctrl-mt7622.c that totally uses the functions back by the generic pinctrl core such as GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS and its binding also completely follows up pinctrl-bindings.txt in Documentation/devicetree/bindings/pinctrl/ to implement. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:18 +08:00
.name = "mt7622-pinctrl",
.of_match_table = mt7622_pinctrl_of_match,
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
},
pinctrl: mediatek: add pinctrl-moore that implements the generic pinctrl dt-bindings Add a generic driver pinctrl-moore.c for MT762x SoC and any other SoC that would like to use generic dt-binding. The patch is furtherly refactored from pinctrl-mt7622.c that totally uses the functions back by the generic pinctrl core such as GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS and its binding also completely follows up pinctrl-bindings.txt in Documentation/devicetree/bindings/pinctrl/ to implement. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:18 +08:00
.probe = mt7622_pinctrl_probe,
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
};
pinctrl: mediatek: add pinctrl-moore that implements the generic pinctrl dt-bindings Add a generic driver pinctrl-moore.c for MT762x SoC and any other SoC that would like to use generic dt-binding. The patch is furtherly refactored from pinctrl-mt7622.c that totally uses the functions back by the generic pinctrl core such as GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS and its binding also completely follows up pinctrl-bindings.txt in Documentation/devicetree/bindings/pinctrl/ to implement. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:18 +08:00
static int __init mt7622_pinctrl_init(void)
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
{
pinctrl: mediatek: add pinctrl-moore that implements the generic pinctrl dt-bindings Add a generic driver pinctrl-moore.c for MT762x SoC and any other SoC that would like to use generic dt-binding. The patch is furtherly refactored from pinctrl-mt7622.c that totally uses the functions back by the generic pinctrl core such as GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS and its binding also completely follows up pinctrl-bindings.txt in Documentation/devicetree/bindings/pinctrl/ to implement. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:18 +08:00
return platform_driver_register(&mt7622_pinctrl_driver);
pinctrl: mediatek: add pinctrl driver for MT7622 SoC Add support for pinctrl on MT7622 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. However, the IO core for the MT7622 SoC is completely distinct from anyone of previous MediaTek SoCs which already had support, such as the hardware internal, register address map and register detailed definition for each pin. Therefore, instead, the driver is being newly implemented by reusing generic methods provided from the core layer with GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS for the sake of code simplicity and rid of superfluous code. Where the function of pins determined by groups is utilized in this driver which can help developers less confused with what combinations of pins effective on the SoC and even reducing the mistakes during the integration of those relevant boards. As the gpio_chip handling is also only a few lines, the driver also implements the gpio functionality directly through GPIOLIB. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-12 14:24:20 +08:00
}
pinctrl: mediatek: add pinctrl-moore that implements the generic pinctrl dt-bindings Add a generic driver pinctrl-moore.c for MT762x SoC and any other SoC that would like to use generic dt-binding. The patch is furtherly refactored from pinctrl-mt7622.c that totally uses the functions back by the generic pinctrl core such as GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS, and GENERIC_PINMUX_FUNCTIONS and its binding also completely follows up pinctrl-bindings.txt in Documentation/devicetree/bindings/pinctrl/ to implement. Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-08 19:07:18 +08:00
arch_initcall(mt7622_pinctrl_init);
Reference in New Issue Copy Permalink