iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
9f5159e89d
linux/drivers/clk/sunxi-ng/ccu-sun9i-a80.c

1250 lines
37 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282 Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29 17:17:56 +03:00
// SPDX-License-Identifier: GPL-2.0-only
clk: sunxi-ng: Add A80 CCU Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-28 15:22:34 +03:00
/*
* Copyright (c) 2016 Chen-Yu Tsai. All rights reserved.
*/
#include <linux/clk-provider.h>
clk: Remove io.h from clk-provider.h Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-19 01:20:22 +03:00
#include <linux/io.h>
clk: sunxi-ng: Add A80 CCU Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-28 15:22:34 +03:00
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include "ccu_common.h"
#include "ccu_reset.h"
#include "ccu_div.h"
#include "ccu_gate.h"
#include "ccu_mp.h"
#include "ccu_nkmp.h"
#include "ccu_nm.h"
#include "ccu_phase.h"
#include "ccu-sun9i-a80.h"
#define CCU_SUN9I_LOCK_REG 0x09c
/*
clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks The CPU cluster PLLs on the A80 are NP clocks that are atypical in two ways: - The P factor is 1 bit wide, and translates to a /1 or /4 divider. - The P factor should only be used for output frequencies lower than 288 MHz. The N factor has a lower limit of 12, which likely contributed to this extra divider. According to the user manual, the clocks can only go as low as 200 MHz. The vendor BSP kernel does not even define operating points below 360 MHz for these clocks. The lower end for cpufreq in the vendor kernel is even higher. The mainline Linux kernel doesn't support cpufreq for the A80 at the moment. This means the lower frequencies are untested, and will likely remain unused. The new sunxi-ng style clocks don't support the quirks listed above. Instead of trying to work the quirks in for something of little usage, we re-model the clocks into N-type multipler clocks, with P fixed at 1. At probe time we check if P is set to 4, and fix it up if needed. This is highly unlikely though. Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 09:37:43 +03:00
* The CPU PLLs are actually NP clocks, with P being /1 or /4. However
* P should only be used for output frequencies lower than 228 MHz.
* Neither mainline Linux, U-boot, nor the vendor BSPs use these.
*
* For now we can just model it as a multiplier clock, and force P to /1.
clk: sunxi-ng: Add A80 CCU Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-28 15:22:34 +03:00
*/
clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks The CPU cluster PLLs on the A80 are NP clocks that are atypical in two ways: - The P factor is 1 bit wide, and translates to a /1 or /4 divider. - The P factor should only be used for output frequencies lower than 288 MHz. The N factor has a lower limit of 12, which likely contributed to this extra divider. According to the user manual, the clocks can only go as low as 200 MHz. The vendor BSP kernel does not even define operating points below 360 MHz for these clocks. The lower end for cpufreq in the vendor kernel is even higher. The mainline Linux kernel doesn't support cpufreq for the A80 at the moment. This means the lower frequencies are untested, and will likely remain unused. The new sunxi-ng style clocks don't support the quirks listed above. Instead of trying to work the quirks in for something of little usage, we re-model the clocks into N-type multipler clocks, with P fixed at 1. At probe time we check if P is set to 4, and fix it up if needed. This is highly unlikely though. Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 09:37:43 +03:00
#define SUN9I_A80_PLL_C0CPUX_REG 0x000
#define SUN9I_A80_PLL_C1CPUX_REG 0x004
static struct ccu_mult pll_c0cpux_clk = {
clk: sunxi-ng: Add A80 CCU Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-28 15:22:34 +03:00
.enable = BIT(31),
.lock = BIT(0),
clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks The CPU cluster PLLs on the A80 are NP clocks that are atypical in two ways: - The P factor is 1 bit wide, and translates to a /1 or /4 divider. - The P factor should only be used for output frequencies lower than 288 MHz. The N factor has a lower limit of 12, which likely contributed to this extra divider. According to the user manual, the clocks can only go as low as 200 MHz. The vendor BSP kernel does not even define operating points below 360 MHz for these clocks. The lower end for cpufreq in the vendor kernel is even higher. The mainline Linux kernel doesn't support cpufreq for the A80 at the moment. This means the lower frequencies are untested, and will likely remain unused. The new sunxi-ng style clocks don't support the quirks listed above. Instead of trying to work the quirks in for something of little usage, we re-model the clocks into N-type multipler clocks, with P fixed at 1. At probe time we check if P is set to 4, and fix it up if needed. This is highly unlikely though. Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 09:37:43 +03:00
.mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
clk: sunxi-ng: Add A80 CCU Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-28 15:22:34 +03:00
.common = {
clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks The CPU cluster PLLs on the A80 are NP clocks that are atypical in two ways: - The P factor is 1 bit wide, and translates to a /1 or /4 divider. - The P factor should only be used for output frequencies lower than 288 MHz. The N factor has a lower limit of 12, which likely contributed to this extra divider. According to the user manual, the clocks can only go as low as 200 MHz. The vendor BSP kernel does not even define operating points below 360 MHz for these clocks. The lower end for cpufreq in the vendor kernel is even higher. The mainline Linux kernel doesn't support cpufreq for the A80 at the moment. This means the lower frequencies are untested, and will likely remain unused. The new sunxi-ng style clocks don't support the quirks listed above. Instead of trying to work the quirks in for something of little usage, we re-model the clocks into N-type multipler clocks, with P fixed at 1. At probe time we check if P is set to 4, and fix it up if needed. This is highly unlikely though. Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 09:37:43 +03:00
.reg = SUN9I_A80_PLL_C0CPUX_REG,
clk: sunxi-ng: Add A80 CCU Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-28 15:22:34 +03:00
.lock_reg = CCU_SUN9I_LOCK_REG,
.features = CCU_FEATURE_LOCK_REG,
.hw.init = CLK_HW_INIT("pll-c0cpux", "osc24M",
clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks The CPU cluster PLLs on the A80 are NP clocks that are atypical in two ways: - The P factor is 1 bit wide, and translates to a /1 or /4 divider. - The P factor should only be used for output frequencies lower than 288 MHz. The N factor has a lower limit of 12, which likely contributed to this extra divider. According to the user manual, the clocks can only go as low as 200 MHz. The vendor BSP kernel does not even define operating points below 360 MHz for these clocks. The lower end for cpufreq in the vendor kernel is even higher. The mainline Linux kernel doesn't support cpufreq for the A80 at the moment. This means the lower frequencies are untested, and will likely remain unused. The new sunxi-ng style clocks don't support the quirks listed above. Instead of trying to work the quirks in for something of little usage, we re-model the clocks into N-type multipler clocks, with P fixed at 1. At probe time we check if P is set to 4, and fix it up if needed. This is highly unlikely though. Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 09:37:43 +03:00
&ccu_mult_ops,
CLK_SET_RATE_UNGATE),
clk: sunxi-ng: Add A80 CCU Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-28 15:22:34 +03:00
},
};
clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks The CPU cluster PLLs on the A80 are NP clocks that are atypical in two ways: - The P factor is 1 bit wide, and translates to a /1 or /4 divider. - The P factor should only be used for output frequencies lower than 288 MHz. The N factor has a lower limit of 12, which likely contributed to this extra divider. According to the user manual, the clocks can only go as low as 200 MHz. The vendor BSP kernel does not even define operating points below 360 MHz for these clocks. The lower end for cpufreq in the vendor kernel is even higher. The mainline Linux kernel doesn't support cpufreq for the A80 at the moment. This means the lower frequencies are untested, and will likely remain unused. The new sunxi-ng style clocks don't support the quirks listed above. Instead of trying to work the quirks in for something of little usage, we re-model the clocks into N-type multipler clocks, with P fixed at 1. At probe time we check if P is set to 4, and fix it up if needed. This is highly unlikely though. Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 09:37:43 +03:00
static struct ccu_mult pll_c1cpux_clk = {
clk: sunxi-ng: Add A80 CCU Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-28 15:22:34 +03:00
.enable = BIT(31),
.lock = BIT(1),
clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks The CPU cluster PLLs on the A80 are NP clocks that are atypical in two ways: - The P factor is 1 bit wide, and translates to a /1 or /4 divider. - The P factor should only be used for output frequencies lower than 288 MHz. The N factor has a lower limit of 12, which likely contributed to this extra divider. According to the user manual, the clocks can only go as low as 200 MHz. The vendor BSP kernel does not even define operating points below 360 MHz for these clocks. The lower end for cpufreq in the vendor kernel is even higher. The mainline Linux kernel doesn't support cpufreq for the A80 at the moment. This means the lower frequencies are untested, and will likely remain unused. The new sunxi-ng style clocks don't support the quirks listed above. Instead of trying to work the quirks in for something of little usage, we re-model the clocks into N-type multipler clocks, with P fixed at 1. At probe time we check if P is set to 4, and fix it up if needed. This is highly unlikely though. Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 09:37:43 +03:00
.mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
clk: sunxi-ng: Add A80 CCU Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-28 15:22:34 +03:00
.common = {
clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks The CPU cluster PLLs on the A80 are NP clocks that are atypical in two ways: - The P factor is 1 bit wide, and translates to a /1 or /4 divider. - The P factor should only be used for output frequencies lower than 288 MHz. The N factor has a lower limit of 12, which likely contributed to this extra divider. According to the user manual, the clocks can only go as low as 200 MHz. The vendor BSP kernel does not even define operating points below 360 MHz for these clocks. The lower end for cpufreq in the vendor kernel is even higher. The mainline Linux kernel doesn't support cpufreq for the A80 at the moment. This means the lower frequencies are untested, and will likely remain unused. The new sunxi-ng style clocks don't support the quirks listed above. Instead of trying to work the quirks in for something of little usage, we re-model the clocks into N-type multipler clocks, with P fixed at 1. At probe time we check if P is set to 4, and fix it up if needed. This is highly unlikely though. Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 09:37:43 +03:00
.reg = SUN9I_A80_PLL_C1CPUX_REG,
clk: sunxi-ng: Add A80 CCU Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-28 15:22:34 +03:00
.lock_reg = CCU_SUN9I_LOCK_REG,
.features = CCU_FEATURE_LOCK_REG,
.hw.init = CLK_HW_INIT("pll-c1cpux", "osc24M",
clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks The CPU cluster PLLs on the A80 are NP clocks that are atypical in two ways: - The P factor is 1 bit wide, and translates to a /1 or /4 divider. - The P factor should only be used for output frequencies lower than 288 MHz. The N factor has a lower limit of 12, which likely contributed to this extra divider. According to the user manual, the clocks can only go as low as 200 MHz. The vendor BSP kernel does not even define operating points below 360 MHz for these clocks. The lower end for cpufreq in the vendor kernel is even higher. The mainline Linux kernel doesn't support cpufreq for the A80 at the moment. This means the lower frequencies are untested, and will likely remain unused. The new sunxi-ng style clocks don't support the quirks listed above. Instead of trying to work the quirks in for something of little usage, we re-model the clocks into N-type multipler clocks, with P fixed at 1. At probe time we check if P is set to 4, and fix it up if needed. This is highly unlikely though. Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 09:37:43 +03:00
&ccu_mult_ops,
CLK_SET_RATE_UNGATE),
clk: sunxi-ng: Add A80 CCU Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-28 15:22:34 +03:00
},
};
/*
* The Audio PLL has d1, d2 dividers in addition to the usual N, M
* factors. Since we only need 2 frequencies from this PLL: 22.5792 MHz
clk: sunxi-ng: a80: Fix audio PLL comment not matching actual code We ignore the d1 and d2 dividers in the audio PLL, and force them to 1 (register value 0) at probe time. However the comment preceding the audio PLL definition says we enforce the default value, which is not the same. Fix the preceding comment to match what we do in code. Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-03-24 11:33:07 +03:00
* and 24.576 MHz, ignore them for now. Enforce d1 = 0 and d2 = 0.
clk: sunxi-ng: Add A80 CCU Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-28 15:22:34 +03:00
*/
#define SUN9I_A80_PLL_AUDIO_REG 0x008
static struct ccu_nm pll_audio_clk = {
.enable = BIT(31),
.lock = BIT(2),
.n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV_OFFSET(0, 6, 0),
.common = {
.reg = 0x008,
.lock_reg = CCU_SUN9I_LOCK_REG,
.features = CCU_FEATURE_LOCK_REG,
.hw.init = CLK_HW_INIT("pll-audio", "osc24M",
&ccu_nm_ops, CLK_SET_RATE_UNGATE),
},
};
/* Some PLLs are input * N / div1 / div2. Model them as NKMP with no K */
static struct ccu_nkmp pll_periph0_clk = {
.enable = BIT(31),
.lock = BIT(3),
.n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(18, 1), /* output divider */
.common = {
.reg = 0x00c,
.lock_reg = CCU_SUN9I_LOCK_REG,
.features = CCU_FEATURE_LOCK_REG,
.hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
static struct ccu_nkmp pll_ve_clk = {
.enable = BIT(31),
.lock = BIT(4),
.n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(18, 1), /* output divider */
.common = {
.reg = 0x010,
.lock_reg = CCU_SUN9I_LOCK_REG,
.features = CCU_FEATURE_LOCK_REG,
.hw.init = CLK_HW_INIT("pll-ve", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
static struct ccu_nkmp pll_ddr_clk = {
.enable = BIT(31),
.lock = BIT(5),
.n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(18, 1), /* output divider */
.common = {
.reg = 0x014,
.lock_reg = CCU_SUN9I_LOCK_REG,
.features = CCU_FEATURE_LOCK_REG,
.hw.init = CLK_HW_INIT("pll-ddr", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
static struct ccu_nm pll_video0_clk = {
.enable = BIT(31),
.lock = BIT(6),
.n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.common = {
.reg = 0x018,
.lock_reg = CCU_SUN9I_LOCK_REG,
.features = CCU_FEATURE_LOCK_REG,
.hw.init = CLK_HW_INIT("pll-video0", "osc24M",
&ccu_nm_ops,
CLK_SET_RATE_UNGATE),
},
};
static struct ccu_nkmp pll_video1_clk = {
.enable = BIT(31),
.lock = BIT(7),
.n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 2), /* external divider p */
.common = {
.reg = 0x01c,
.lock_reg = CCU_SUN9I_LOCK_REG,
.features = CCU_FEATURE_LOCK_REG,
.hw.init = CLK_HW_INIT("pll-video1", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
static struct ccu_nkmp pll_gpu_clk = {
.enable = BIT(31),
.lock = BIT(8),
.n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(18, 1), /* output divider */
.common = {
.reg = 0x020,
.lock_reg = CCU_SUN9I_LOCK_REG,
.features = CCU_FEATURE_LOCK_REG,
.hw.init = CLK_HW_INIT("pll-gpu", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
static struct ccu_nkmp pll_de_clk = {
.enable = BIT(31),
.lock = BIT(9),
.n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(18, 1), /* output divider */
.common = {
.reg = 0x024,
.lock_reg = CCU_SUN9I_LOCK_REG,
.features = CCU_FEATURE_LOCK_REG,
.hw.init = CLK_HW_INIT("pll-de", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
static struct ccu_nkmp pll_isp_clk = {
.enable = BIT(31),
.lock = BIT(10),
.n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(18, 1), /* output divider */
.common = {
.reg = 0x028,
.lock_reg = CCU_SUN9I_LOCK_REG,
.features = CCU_FEATURE_LOCK_REG,
.hw.init = CLK_HW_INIT("pll-isp", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
static struct ccu_nkmp pll_periph1_clk = {
.enable = BIT(31),
.lock = BIT(11),
.n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
.m = _SUNXI_CCU_DIV(16, 1), /* input divider */
.p = _SUNXI_CCU_DIV(18, 1), /* output divider */
.common = {
.reg = 0x028,
.lock_reg = CCU_SUN9I_LOCK_REG,
.features = CCU_FEATURE_LOCK_REG,
.hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
static const char * const c0cpux_parents[] = { "osc24M", "pll-c0cpux" };
static SUNXI_CCU_MUX(c0cpux_clk, "c0cpux", c0cpux_parents,
0x50, 0, 1, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
static const char * const c1cpux_parents[] = { "osc24M", "pll-c1cpux" };
static SUNXI_CCU_MUX(c1cpux_clk, "c1cpux", c1cpux_parents,
0x50, 8, 1, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
static struct clk_div_table axi_div_table[] = {
{ .val = 0, .div = 1 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 3 },
{ .val = 3, .div = 4 },
{ .val = 4, .div = 4 },
{ .val = 5, .div = 4 },
{ .val = 6, .div = 4 },
{ .val = 7, .div = 4 },
{ /* Sentinel */ },
};
static SUNXI_CCU_M(atb0_clk, "atb0", "c0cpux", 0x054, 8, 2, 0);
static SUNXI_CCU_DIV_TABLE(axi0_clk, "axi0", "c0cpux",
0x054, 0, 3, axi_div_table, 0);
static SUNXI_CCU_M(atb1_clk, "atb1", "c1cpux", 0x058, 8, 2, 0);
static SUNXI_CCU_DIV_TABLE(axi1_clk, "axi1", "c1cpux",
0x058, 0, 3, axi_div_table, 0);
static const char * const gtbus_parents[] = { "osc24M", "pll-periph0",
"pll-periph1", "pll-periph1" };
static SUNXI_CCU_M_WITH_MUX(gtbus_clk, "gtbus", gtbus_parents,
0x05c, 0, 2, 24, 2, CLK_IS_CRITICAL);
static const char * const ahb_parents[] = { "gtbus", "pll-periph0",
"pll-periph1", "pll-periph1" };
static struct ccu_div ahb0_clk = {
.div = _SUNXI_CCU_DIV_FLAGS(0, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0x060,
.hw.init = CLK_HW_INIT_PARENTS("ahb0",
ahb_parents,
&ccu_div_ops,
0),
},
};
static struct ccu_div ahb1_clk = {
.div = _SUNXI_CCU_DIV_FLAGS(0, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0x064,
.hw.init = CLK_HW_INIT_PARENTS("ahb1",
ahb_parents,
&ccu_div_ops,
0),
},
};
static struct ccu_div ahb2_clk = {
.div = _SUNXI_CCU_DIV_FLAGS(0, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0x068,
.hw.init = CLK_HW_INIT_PARENTS("ahb2",
ahb_parents,
&ccu_div_ops,
0),
},
};
static const char * const apb_parents[] = { "osc24M", "pll-periph0" };
static struct ccu_div apb0_clk = {
.div = _SUNXI_CCU_DIV_FLAGS(0, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 1),
.common = {
.reg = 0x070,
.hw.init = CLK_HW_INIT_PARENTS("apb0",
apb_parents,
&ccu_div_ops,
0),
},
};
static struct ccu_div apb1_clk = {
.div = _SUNXI_CCU_DIV_FLAGS(0, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 1),
.common = {
.reg = 0x074,
.hw.init = CLK_HW_INIT_PARENTS("apb1",
apb_parents,
&ccu_div_ops,
0),
},
};
static struct ccu_div cci400_clk = {
.div = _SUNXI_CCU_DIV_FLAGS(0, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0x078,
.hw.init = CLK_HW_INIT_PARENTS("cci400",
ahb_parents,
&ccu_div_ops,
CLK_IS_CRITICAL),
},
};
static SUNXI_CCU_M_WITH_MUX_GATE(ats_clk, "ats", apb_parents,
0x080, 0, 3, 24, 2, BIT(31), 0);
static SUNXI_CCU_M_WITH_MUX_GATE(trace_clk, "trace", apb_parents,
0x084, 0, 3, 24, 2, BIT(31), 0);
static const char * const out_parents[] = { "osc24M", "osc32k", "osc24M" };
static const struct ccu_mux_fixed_prediv out_prediv = {
.index = 0, .div = 750
};
static struct ccu_mp out_a_clk = {
.enable = BIT(31),
.m = _SUNXI_CCU_DIV(8, 5),
.p = _SUNXI_CCU_DIV(20, 2),
.mux = {
.shift = 24,
.width = 4,
.fixed_predivs = &out_prediv,
.n_predivs = 1,
},
.common = {
.reg = 0x180,
.features = CCU_FEATURE_FIXED_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("out-a",
out_parents,
&ccu_mp_ops,
0),
},
};
static struct ccu_mp out_b_clk = {
.enable = BIT(31),
.m = _SUNXI_CCU_DIV(8, 5),
.p = _SUNXI_CCU_DIV(20, 2),
.mux = {
.shift = 24,
.width = 4,
.fixed_predivs = &out_prediv,
.n_predivs = 1,
},
.common = {
.reg = 0x184,
.features = CCU_FEATURE_FIXED_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("out-b",
out_parents,
&ccu_mp_ops,
0),
},
};
static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0" };
static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_0_clk, "nand0-0", mod0_default_parents,
0x400,
0, 4, /* M */
16, 2, /* P */
24, 4, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_1_clk, "nand0-1", mod0_default_parents,
0x404,
0, 4, /* M */
16, 2, /* P */
24, 4, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_0_clk, "nand1-0", mod0_default_parents,
0x408,
0, 4, /* M */
16, 2, /* P */
24, 4, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_1_clk, "nand1-1", mod0_default_parents,
0x40c,
0, 4, /* M */
16, 2, /* P */
24, 4, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents,
0x410,
0, 4, /* M */
16, 2, /* P */
24, 4, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0-sample", "mmc0",
0x410, 20, 3, 0);
static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0-output", "mmc0",
0x410, 8, 3, 0);
static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents,
0x414,
0, 4, /* M */
16, 2, /* P */
24, 4, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1-sample", "mmc1",
0x414, 20, 3, 0);
static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1-output", "mmc1",
0x414, 8, 3, 0);
static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents,
0x418,
0, 4, /* M */
16, 2, /* P */
24, 4, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2-sample", "mmc2",
0x418, 20, 3, 0);
static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2-output", "mmc2",
0x418, 8, 3, 0);
static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents,
0x41c,
0, 4, /* M */
16, 2, /* P */
24, 4, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_PHASE(mmc3_sample_clk, "mmc3-sample", "mmc3",
0x41c, 20, 3, 0);
static SUNXI_CCU_PHASE(mmc3_output_clk, "mmc3-output", "mmc3",
0x41c, 8, 3, 0);
static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", mod0_default_parents,
0x428,
0, 4, /* M */
16, 2, /* P */
24, 4, /* mux */
BIT(31), /* gate */
0);
static const char * const ss_parents[] = { "osc24M", "pll-periph",
"pll-periph1" };
static const u8 ss_table[] = { 0, 1, 13 };
static struct ccu_mp ss_clk = {
.enable = BIT(31),
.m = _SUNXI_CCU_DIV(0, 4),
.p = _SUNXI_CCU_DIV(16, 2),
.mux = _SUNXI_CCU_MUX_TABLE(24, 4, ss_table),
.common = {
.reg = 0x42c,
.hw.init = CLK_HW_INIT_PARENTS("ss",
ss_parents,
&ccu_mp_ops,
0),
},
};
static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents,
0x430,
0, 4, /* M */
16, 2, /* P */
24, 4, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents,
0x434,
0, 4, /* M */
16, 2, /* P */
24, 4, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents,
0x438,
0, 4, /* M */
16, 2, /* P */
24, 4, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents,
0x43c,
0, 4, /* M */
16, 2, /* P */
24, 4, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_M_WITH_GATE(i2s0_clk, "i2s0", "pll-audio",
0x440, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_GATE(i2s1_clk, "i2s1", "pll-audio",
0x444, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
0x44c, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
static const char * const sdram_parents[] = { "pll-periph0", "pll-ddr" };
static const u8 sdram_table[] = { 0, 3 };
static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(sdram_clk, "sdram",
sdram_parents, sdram_table,
0x484,
8, 4, /* M */
12, 4, /* mux */
0, /* no gate */
CLK_IS_CRITICAL);
static SUNXI_CCU_M_WITH_GATE(de_clk, "de", "pll-de", 0x490,
0, 4, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(edp_clk, "edp", "osc24M", 0x494, BIT(31), 0);
static const char * const mp_parents[] = { "pll-video1", "pll-gpu", "pll-de" };
static const u8 mp_table[] = { 9, 10, 11 };
static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(mp_clk, "mp", mp_parents, mp_table,
0x498,
0, 4, /* M */
24, 4, /* mux */
BIT(31), /* gate */
0);
static const char * const display_parents[] = { "pll-video0", "pll-video1" };
static const u8 display_table[] = { 8, 9 };
static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(lcd0_clk, "lcd0",
display_parents, display_table,
0x49c,
0, 4, /* M */
24, 4, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_NO_REPARENT |
CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(lcd1_clk, "lcd1",
display_parents, display_table,
0x4a0,
0, 4, /* M */
24, 4, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_NO_REPARENT |
CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(mipi_dsi0_clk, "mipi-dsi0",
display_parents, display_table,
0x4a8,
0, 4, /* M */
24, 4, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_PARENT);
static const char * const mipi_dsi1_parents[] = { "osc24M", "pll-video1" };
static const u8 mipi_dsi1_table[] = { 0, 9 };
static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(mipi_dsi1_clk, "mipi-dsi1",
mipi_dsi1_parents, mipi_dsi1_table,
0x4ac,
0, 4, /* M */
24, 4, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(hdmi_clk, "hdmi",
display_parents, display_table,
0x4b0,
0, 4, /* M */
24, 4, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_NO_REPARENT |
CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M", 0x4b4, BIT(31), 0);
static SUNXI_CCU_M_WITH_GATE(mipi_csi_clk, "mipi-csi", "osc24M", 0x4bc,
0, 4, BIT(31), 0);
static SUNXI_CCU_M_WITH_GATE(csi_isp_clk, "csi-isp", "pll-isp", 0x4c0,
0, 4, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M", 0x4c0, BIT(16), 0);
static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi0_mclk_clk, "csi0-mclk",
mipi_dsi1_parents, mipi_dsi1_table,
0x4c4,
0, 4, /* M */
24, 4, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi1_mclk_clk, "csi1-mclk",
mipi_dsi1_parents, mipi_dsi1_table,
0x4c8,
0, 4, /* M */
24, 4, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_PARENT);
static const char * const fd_parents[] = { "pll-periph0", "pll-isp" };
static const u8 fd_table[] = { 1, 12 };
static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(fd_clk, "fd", fd_parents, fd_table,
0x4cc,
0, 4, /* M */
24, 4, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve", 0x4d0,
16, 3, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x4d4, BIT(31), 0);
static SUNXI_CCU_M_WITH_GATE(gpu_core_clk, "gpu-core", "pll-gpu", 0x4f0,
0, 3, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_GATE(gpu_memory_clk, "gpu-memory", "pll-gpu", 0x4f4,
0, 3, BIT(31), CLK_SET_RATE_PARENT);
static const char * const gpu_axi_parents[] = { "pll-periph0", "pll-gpu" };
static const u8 gpu_axi_table[] = { 1, 10 };
static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(gpu_axi_clk, "gpu-axi",
gpu_axi_parents, gpu_axi_table,
0x4f8,
0, 4, /* M */
24, 4, /* mux */
BIT(31), /* gate */
CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_GATE(sata_clk, "sata", "pll-periph0", 0x500,
0, 4, BIT(31), 0);
static SUNXI_CCU_M_WITH_GATE(ac97_clk, "ac97", "pll-audio",
0x504, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
static SUNXI_CCU_M_WITH_MUX_GATE(mipi_hsi_clk, "mipi-hsi",
mod0_default_parents, 0x508,
0, 4, /* M */
24, 4, /* mux */
BIT(31), /* gate */
0);
static const char * const gpadc_parents[] = { "osc24M", "pll-audio", "osc32k" };
static const u8 gpadc_table[] = { 0, 4, 7 };
static struct ccu_mp gpadc_clk = {
.enable = BIT(31),
.m = _SUNXI_CCU_DIV(0, 4),
.p = _SUNXI_CCU_DIV(16, 2),
.mux = _SUNXI_CCU_MUX_TABLE(24, 4, gpadc_table),
.common = {
.reg = 0x50c,
.hw.init = CLK_HW_INIT_PARENTS("gpadc",
gpadc_parents,
&ccu_mp_ops,
0),
},
};
static const char * const cir_tx_parents[] = { "osc24M", "osc32k" };
static const u8 cir_tx_table[] = { 0, 7 };
static struct ccu_mp cir_tx_clk = {
.enable = BIT(31),
.m = _SUNXI_CCU_DIV(0, 4),
.p = _SUNXI_CCU_DIV(16, 2),
.mux = _SUNXI_CCU_MUX_TABLE(24, 4, cir_tx_table),
.common = {
.reg = 0x510,
.hw.init = CLK_HW_INIT_PARENTS("cir-tx",
cir_tx_parents,
&ccu_mp_ops,
0),
},
};
/* AHB0 bus gates */
static SUNXI_CCU_GATE(bus_fd_clk, "bus-fd", "ahb0",
0x580, BIT(0), 0);
static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb0",
0x580, BIT(1), 0);
static SUNXI_CCU_GATE(bus_gpu_ctrl_clk, "bus-gpu-ctrl", "ahb0",
0x580, BIT(3), 0);
static SUNXI_CCU_GATE(bus_ss_clk, "bus-ss", "ahb0",
0x580, BIT(5), 0);
static SUNXI_CCU_GATE(bus_mmc_clk, "bus-mmc", "ahb0",
0x580, BIT(8), 0);
static SUNXI_CCU_GATE(bus_nand0_clk, "bus-nand0", "ahb0",
0x580, BIT(12), 0);
static SUNXI_CCU_GATE(bus_nand1_clk, "bus-nand1", "ahb0",
0x580, BIT(13), 0);
static SUNXI_CCU_GATE(bus_sdram_clk, "bus-sdram", "ahb0",
0x580, BIT(14), 0);
static SUNXI_CCU_GATE(bus_mipi_hsi_clk, "bus-mipi-hsi", "ahb0",
0x580, BIT(15), 0);
static SUNXI_CCU_GATE(bus_sata_clk, "bus-sata", "ahb0",
0x580, BIT(16), 0);
static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb0",
0x580, BIT(18), 0);
static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb0",
0x580, BIT(20), 0);
static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb0",
0x580, BIT(21), 0);
static SUNXI_CCU_GATE(bus_spi2_clk, "bus-spi2", "ahb0",
0x580, BIT(22), 0);
static SUNXI_CCU_GATE(bus_spi3_clk, "bus-spi3", "ahb0",
0x580, BIT(23), 0);
/* AHB1 bus gates */
static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1",
0x584, BIT(0), 0);
static SUNXI_CCU_GATE(bus_usb_clk, "bus-usb", "ahb1",
0x584, BIT(1), 0);
static SUNXI_CCU_GATE(bus_gmac_clk, "bus-gmac", "ahb1",
0x584, BIT(17), 0);
static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "ahb1",
0x584, BIT(21), 0);
static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "ahb1",
0x584, BIT(22), 0);
static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "ahb1",
0x584, BIT(23), 0);
static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1",
0x584, BIT(24), 0);
/* AHB2 bus gates */
static SUNXI_CCU_GATE(bus_lcd0_clk, "bus-lcd0", "ahb2",
0x588, BIT(0), 0);
static SUNXI_CCU_GATE(bus_lcd1_clk, "bus-lcd1", "ahb2",
0x588, BIT(1), 0);
static SUNXI_CCU_GATE(bus_edp_clk, "bus-edp", "ahb2",
0x588, BIT(2), 0);
static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb2",
0x588, BIT(4), 0);
static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb2",
0x588, BIT(5), 0);
static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb2",
0x588, BIT(7), 0);
static SUNXI_CCU_GATE(bus_mp_clk, "bus-mp", "ahb2",
0x588, BIT(8), 0);
static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb2",
0x588, BIT(11), 0);
/* APB0 bus gates */
static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb0",
0x590, BIT(1), 0);
static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb0",
0x590, BIT(5), 0);
static SUNXI_CCU_GATE(bus_ac97_clk, "bus-ac97", "apb0",
0x590, BIT(11), 0);
static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb0",
0x590, BIT(12), 0);
static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb0",
0x590, BIT(13), 0);
static SUNXI_CCU_GATE(bus_lradc_clk, "bus-lradc", "apb0",
0x590, BIT(15), 0);
static SUNXI_CCU_GATE(bus_gpadc_clk, "bus-gpadc", "apb0",
0x590, BIT(17), 0);
static SUNXI_CCU_GATE(bus_twd_clk, "bus-twd", "apb0",
0x590, BIT(18), 0);
static SUNXI_CCU_GATE(bus_cir_tx_clk, "bus-cir-tx", "apb0",
0x590, BIT(19), 0);
/* APB1 bus gates */
static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb1",
0x594, BIT(0), 0);
static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb1",
0x594, BIT(1), 0);
static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb1",
0x594, BIT(2), 0);
static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb1",
0x594, BIT(3), 0);
static SUNXI_CCU_GATE(bus_i2c4_clk, "bus-i2c4", "apb1",
0x594, BIT(4), 0);
static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb1",
0x594, BIT(16), 0);
static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb1",
0x594, BIT(17), 0);
static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb1",
0x594, BIT(18), 0);
static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb1",
0x594, BIT(19), 0);
static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb1",
0x594, BIT(20), 0);
static SUNXI_CCU_GATE(bus_uart5_clk, "bus-uart5", "apb1",
0x594, BIT(21), 0);
static struct ccu_common *sun9i_a80_ccu_clks[] = {
&pll_c0cpux_clk.common,
&pll_c1cpux_clk.common,
&pll_audio_clk.common,
&pll_periph0_clk.common,
&pll_ve_clk.common,
&pll_ddr_clk.common,
&pll_video0_clk.common,
&pll_video1_clk.common,
&pll_gpu_clk.common,
&pll_de_clk.common,
&pll_isp_clk.common,
&pll_periph1_clk.common,
&c0cpux_clk.common,
&c1cpux_clk.common,
&atb0_clk.common,
&axi0_clk.common,
&atb1_clk.common,
&axi1_clk.common,
&gtbus_clk.common,
&ahb0_clk.common,
&ahb1_clk.common,
&ahb2_clk.common,
&apb0_clk.common,
&apb1_clk.common,
&cci400_clk.common,
&ats_clk.common,
&trace_clk.common,
&out_a_clk.common,
&out_b_clk.common,
/* module clocks */
&nand0_0_clk.common,
&nand0_1_clk.common,
&nand1_0_clk.common,
&nand1_1_clk.common,
&mmc0_clk.common,
&mmc0_sample_clk.common,
&mmc0_output_clk.common,
&mmc1_clk.common,
&mmc1_sample_clk.common,
&mmc1_output_clk.common,
&mmc2_clk.common,
&mmc2_sample_clk.common,
&mmc2_output_clk.common,
&mmc3_clk.common,
&mmc3_sample_clk.common,
&mmc3_output_clk.common,
&ts_clk.common,
&ss_clk.common,
&spi0_clk.common,
&spi1_clk.common,
&spi2_clk.common,
&spi3_clk.common,
&i2s0_clk.common,
&i2s1_clk.common,
&spdif_clk.common,
&sdram_clk.common,
&de_clk.common,
&edp_clk.common,
&mp_clk.common,
&lcd0_clk.common,
&lcd1_clk.common,
&mipi_dsi0_clk.common,
&mipi_dsi1_clk.common,
&hdmi_clk.common,
&hdmi_slow_clk.common,
&mipi_csi_clk.common,
&csi_isp_clk.common,
&csi_misc_clk.common,
&csi0_mclk_clk.common,
&csi1_mclk_clk.common,
&fd_clk.common,
&ve_clk.common,
&avs_clk.common,
&gpu_core_clk.common,
&gpu_memory_clk.common,
&gpu_axi_clk.common,
&sata_clk.common,
&ac97_clk.common,
&mipi_hsi_clk.common,
&gpadc_clk.common,
&cir_tx_clk.common,
/* AHB0 bus gates */
&bus_fd_clk.common,
&bus_ve_clk.common,
&bus_gpu_ctrl_clk.common,
&bus_ss_clk.common,
&bus_mmc_clk.common,
&bus_nand0_clk.common,
&bus_nand1_clk.common,
&bus_sdram_clk.common,
&bus_mipi_hsi_clk.common,
&bus_sata_clk.common,
&bus_ts_clk.common,
&bus_spi0_clk.common,
&bus_spi1_clk.common,
&bus_spi2_clk.common,
&bus_spi3_clk.common,
/* AHB1 bus gates */
&bus_otg_clk.common,
&bus_usb_clk.common,
&bus_gmac_clk.common,
&bus_msgbox_clk.common,
&bus_spinlock_clk.common,
&bus_hstimer_clk.common,
&bus_dma_clk.common,
/* AHB2 bus gates */
&bus_lcd0_clk.common,
&bus_lcd1_clk.common,
&bus_edp_clk.common,
&bus_csi_clk.common,
&bus_hdmi_clk.common,
&bus_de_clk.common,
&bus_mp_clk.common,
&bus_mipi_dsi_clk.common,
/* APB0 bus gates */
&bus_spdif_clk.common,
&bus_pio_clk.common,
&bus_ac97_clk.common,
&bus_i2s0_clk.common,
&bus_i2s1_clk.common,
&bus_lradc_clk.common,
&bus_gpadc_clk.common,
&bus_twd_clk.common,
&bus_cir_tx_clk.common,
/* APB1 bus gates */
&bus_i2c0_clk.common,
&bus_i2c1_clk.common,
&bus_i2c2_clk.common,
&bus_i2c3_clk.common,
&bus_i2c4_clk.common,
&bus_uart0_clk.common,
&bus_uart1_clk.common,
&bus_uart2_clk.common,
&bus_uart3_clk.common,
&bus_uart4_clk.common,
&bus_uart5_clk.common,
};
static struct clk_hw_onecell_data sun9i_a80_hw_clks = {
.hws = {
[CLK_PLL_C0CPUX] = &pll_c0cpux_clk.common.hw,
[CLK_PLL_C1CPUX] = &pll_c1cpux_clk.common.hw,
[CLK_PLL_AUDIO] = &pll_audio_clk.common.hw,
[CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
[CLK_PLL_VE] = &pll_ve_clk.common.hw,
[CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
[CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
[CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
[CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
[CLK_PLL_DE] = &pll_de_clk.common.hw,
[CLK_PLL_ISP] = &pll_isp_clk.common.hw,
[CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
[CLK_C0CPUX] = &c0cpux_clk.common.hw,
[CLK_C1CPUX] = &c1cpux_clk.common.hw,
[CLK_ATB0] = &atb0_clk.common.hw,
[CLK_AXI0] = &axi0_clk.common.hw,
[CLK_ATB1] = &atb1_clk.common.hw,
[CLK_AXI1] = &axi1_clk.common.hw,
[CLK_GTBUS] = &gtbus_clk.common.hw,
[CLK_AHB0] = &ahb0_clk.common.hw,
[CLK_AHB1] = &ahb1_clk.common.hw,
[CLK_AHB2] = &ahb2_clk.common.hw,
[CLK_APB0] = &apb0_clk.common.hw,
[CLK_APB1] = &apb1_clk.common.hw,
[CLK_CCI400] = &cci400_clk.common.hw,
[CLK_ATS] = &ats_clk.common.hw,
[CLK_TRACE] = &trace_clk.common.hw,
[CLK_OUT_A] = &out_a_clk.common.hw,
[CLK_OUT_B] = &out_b_clk.common.hw,
[CLK_NAND0_0] = &nand0_0_clk.common.hw,
[CLK_NAND0_1] = &nand0_1_clk.common.hw,
[CLK_NAND1_0] = &nand1_0_clk.common.hw,
[CLK_NAND1_1] = &nand1_1_clk.common.hw,
[CLK_MMC0] = &mmc0_clk.common.hw,
[CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw,
[CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw,
[CLK_MMC1] = &mmc1_clk.common.hw,
[CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw,
[CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw,
[CLK_MMC2] = &mmc2_clk.common.hw,
[CLK_MMC2_SAMPLE] = &mmc2_sample_clk.common.hw,
[CLK_MMC2_OUTPUT] = &mmc2_output_clk.common.hw,
[CLK_MMC3] = &mmc3_clk.common.hw,
[CLK_MMC3_SAMPLE] = &mmc3_sample_clk.common.hw,
[CLK_MMC3_OUTPUT] = &mmc3_output_clk.common.hw,
[CLK_TS] = &ts_clk.common.hw,
[CLK_SS] = &ss_clk.common.hw,
[CLK_SPI0] = &spi0_clk.common.hw,
[CLK_SPI1] = &spi1_clk.common.hw,
[CLK_SPI2] = &spi2_clk.common.hw,
[CLK_SPI3] = &spi3_clk.common.hw,
[CLK_I2S0] = &i2s0_clk.common.hw,
[CLK_I2S1] = &i2s1_clk.common.hw,
[CLK_SPDIF] = &spdif_clk.common.hw,
[CLK_SDRAM] = &sdram_clk.common.hw,
[CLK_DE] = &de_clk.common.hw,
[CLK_EDP] = &edp_clk.common.hw,
[CLK_MP] = &mp_clk.common.hw,
[CLK_LCD0] = &lcd0_clk.common.hw,
[CLK_LCD1] = &lcd1_clk.common.hw,
[CLK_MIPI_DSI0] = &mipi_dsi0_clk.common.hw,
[CLK_MIPI_DSI1] = &mipi_dsi1_clk.common.hw,
[CLK_HDMI] = &hdmi_clk.common.hw,
[CLK_HDMI_SLOW] = &hdmi_slow_clk.common.hw,
[CLK_MIPI_CSI] = &mipi_csi_clk.common.hw,
[CLK_CSI_ISP] = &csi_isp_clk.common.hw,
[CLK_CSI_MISC] = &csi_misc_clk.common.hw,
[CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw,
[CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw,
[CLK_FD] = &fd_clk.common.hw,
[CLK_VE] = &ve_clk.common.hw,
[CLK_AVS] = &avs_clk.common.hw,
[CLK_GPU_CORE] = &gpu_core_clk.common.hw,
[CLK_GPU_MEMORY] = &gpu_memory_clk.common.hw,
[CLK_GPU_AXI] = &gpu_axi_clk.common.hw,
[CLK_SATA] = &sata_clk.common.hw,
[CLK_AC97] = &ac97_clk.common.hw,
[CLK_MIPI_HSI] = &mipi_hsi_clk.common.hw,
[CLK_GPADC] = &gpadc_clk.common.hw,
[CLK_CIR_TX] = &cir_tx_clk.common.hw,
[CLK_BUS_FD] = &bus_fd_clk.common.hw,
[CLK_BUS_VE] = &bus_ve_clk.common.hw,
[CLK_BUS_GPU_CTRL] = &bus_gpu_ctrl_clk.common.hw,
[CLK_BUS_SS] = &bus_ss_clk.common.hw,
[CLK_BUS_MMC] = &bus_mmc_clk.common.hw,
[CLK_BUS_NAND0] = &bus_nand0_clk.common.hw,
[CLK_BUS_NAND1] = &bus_nand1_clk.common.hw,
[CLK_BUS_SDRAM] = &bus_sdram_clk.common.hw,
[CLK_BUS_MIPI_HSI] = &bus_mipi_hsi_clk.common.hw,
[CLK_BUS_SATA] = &bus_sata_clk.common.hw,
[CLK_BUS_TS] = &bus_ts_clk.common.hw,
[CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
[CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
[CLK_BUS_SPI2] = &bus_spi2_clk.common.hw,
[CLK_BUS_SPI3] = &bus_spi3_clk.common.hw,
[CLK_BUS_OTG] = &bus_otg_clk.common.hw,
[CLK_BUS_USB] = &bus_usb_clk.common.hw,
[CLK_BUS_GMAC] = &bus_gmac_clk.common.hw,
[CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
[CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
[CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
[CLK_BUS_DMA] = &bus_dma_clk.common.hw,
[CLK_BUS_LCD0] = &bus_lcd0_clk.common.hw,
[CLK_BUS_LCD1] = &bus_lcd1_clk.common.hw,
[CLK_BUS_EDP] = &bus_edp_clk.common.hw,
[CLK_BUS_CSI] = &bus_csi_clk.common.hw,
[CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
[CLK_BUS_DE] = &bus_de_clk.common.hw,
[CLK_BUS_MP] = &bus_mp_clk.common.hw,
[CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
[CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
[CLK_BUS_PIO] = &bus_pio_clk.common.hw,
[CLK_BUS_AC97] = &bus_ac97_clk.common.hw,
[CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
[CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
[CLK_BUS_LRADC] = &bus_lradc_clk.common.hw,
[CLK_BUS_GPADC] = &bus_gpadc_clk.common.hw,
[CLK_BUS_TWD] = &bus_twd_clk.common.hw,
[CLK_BUS_CIR_TX] = &bus_cir_tx_clk.common.hw,
[CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
[CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
[CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
[CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
[CLK_BUS_I2C4] = &bus_i2c4_clk.common.hw,
[CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
[CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
[CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
[CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
[CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
[CLK_BUS_UART5] = &bus_uart5_clk.common.hw,
},
.num = CLK_NUMBER,
};
static struct ccu_reset_map sun9i_a80_ccu_resets[] = {
/* AHB0 reset controls */
[RST_BUS_FD] = { 0x5a0, BIT(0) },
[RST_BUS_VE] = { 0x5a0, BIT(1) },
[RST_BUS_GPU_CTRL] = { 0x5a0, BIT(3) },
[RST_BUS_SS] = { 0x5a0, BIT(5) },
[RST_BUS_MMC] = { 0x5a0, BIT(8) },
[RST_BUS_NAND0] = { 0x5a0, BIT(12) },
[RST_BUS_NAND1] = { 0x5a0, BIT(13) },
[RST_BUS_SDRAM] = { 0x5a0, BIT(14) },
[RST_BUS_SATA] = { 0x5a0, BIT(16) },
[RST_BUS_TS] = { 0x5a0, BIT(18) },
[RST_BUS_SPI0] = { 0x5a0, BIT(20) },
[RST_BUS_SPI1] = { 0x5a0, BIT(21) },
[RST_BUS_SPI2] = { 0x5a0, BIT(22) },
[RST_BUS_SPI3] = { 0x5a0, BIT(23) },
/* AHB1 reset controls */
[RST_BUS_OTG] = { 0x5a4, BIT(0) },
[RST_BUS_OTG_PHY] = { 0x5a4, BIT(1) },
[RST_BUS_MIPI_HSI] = { 0x5a4, BIT(9) },
[RST_BUS_GMAC] = { 0x5a4, BIT(17) },
[RST_BUS_MSGBOX] = { 0x5a4, BIT(21) },
[RST_BUS_SPINLOCK] = { 0x5a4, BIT(22) },
[RST_BUS_HSTIMER] = { 0x5a4, BIT(23) },
[RST_BUS_DMA] = { 0x5a4, BIT(24) },
/* AHB2 reset controls */
[RST_BUS_LCD0] = { 0x5a8, BIT(0) },
[RST_BUS_LCD1] = { 0x5a8, BIT(1) },
[RST_BUS_EDP] = { 0x5a8, BIT(2) },
[RST_BUS_LVDS] = { 0x5a8, BIT(3) },
[RST_BUS_CSI] = { 0x5a8, BIT(4) },
[RST_BUS_HDMI0] = { 0x5a8, BIT(5) },
[RST_BUS_HDMI1] = { 0x5a8, BIT(6) },
[RST_BUS_DE] = { 0x5a8, BIT(7) },
[RST_BUS_MP] = { 0x5a8, BIT(8) },
[RST_BUS_GPU] = { 0x5a8, BIT(9) },
[RST_BUS_MIPI_DSI] = { 0x5a8, BIT(11) },
/* APB0 reset controls */
[RST_BUS_SPDIF] = { 0x5b0, BIT(1) },
[RST_BUS_AC97] = { 0x5b0, BIT(11) },
[RST_BUS_I2S0] = { 0x5b0, BIT(12) },
[RST_BUS_I2S1] = { 0x5b0, BIT(13) },
[RST_BUS_LRADC] = { 0x5b0, BIT(15) },
[RST_BUS_GPADC] = { 0x5b0, BIT(17) },
[RST_BUS_CIR_TX] = { 0x5b0, BIT(19) },
/* APB1 reset controls */
[RST_BUS_I2C0] = { 0x5b4, BIT(0) },
[RST_BUS_I2C1] = { 0x5b4, BIT(1) },
[RST_BUS_I2C2] = { 0x5b4, BIT(2) },
[RST_BUS_I2C3] = { 0x5b4, BIT(3) },
[RST_BUS_I2C4] = { 0x5b4, BIT(4) },
[RST_BUS_UART0] = { 0x5b4, BIT(16) },
[RST_BUS_UART1] = { 0x5b4, BIT(17) },
[RST_BUS_UART2] = { 0x5b4, BIT(18) },
[RST_BUS_UART3] = { 0x5b4, BIT(19) },
[RST_BUS_UART4] = { 0x5b4, BIT(20) },
[RST_BUS_UART5] = { 0x5b4, BIT(21) },
};
static const struct sunxi_ccu_desc sun9i_a80_ccu_desc = {
.ccu_clks = sun9i_a80_ccu_clks,
.num_ccu_clks = ARRAY_SIZE(sun9i_a80_ccu_clks),
.hw_clks = &sun9i_a80_hw_clks,
.resets = sun9i_a80_ccu_resets,
.num_resets = ARRAY_SIZE(sun9i_a80_ccu_resets),
};
clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks The CPU cluster PLLs on the A80 are NP clocks that are atypical in two ways: - The P factor is 1 bit wide, and translates to a /1 or /4 divider. - The P factor should only be used for output frequencies lower than 288 MHz. The N factor has a lower limit of 12, which likely contributed to this extra divider. According to the user manual, the clocks can only go as low as 200 MHz. The vendor BSP kernel does not even define operating points below 360 MHz for these clocks. The lower end for cpufreq in the vendor kernel is even higher. The mainline Linux kernel doesn't support cpufreq for the A80 at the moment. This means the lower frequencies are untested, and will likely remain unused. The new sunxi-ng style clocks don't support the quirks listed above. Instead of trying to work the quirks in for something of little usage, we re-model the clocks into N-type multipler clocks, with P fixed at 1. At probe time we check if P is set to 4, and fix it up if needed. This is highly unlikely though. Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 09:37:43 +03:00
#define SUN9I_A80_PLL_P_SHIFT 16
#define SUN9I_A80_PLL_N_SHIFT 8
#define SUN9I_A80_PLL_N_WIDTH 8
static void sun9i_a80_cpu_pll_fixup(void __iomem *reg)
{
u32 val = readl(reg);
/* bail out if P divider is not used */
if (!(val & BIT(SUN9I_A80_PLL_P_SHIFT)))
return;
/*
* If P is used, output should be less than 288 MHz. When we
* set P to 1, we should also decrease the multiplier so the
* output doesn't go out of range, but not too much such that
* the multiplier stays above 12, the minimal operation value.
*
* To keep it simple, set the multiplier to 17, the reset value.
*/
val &= ~GENMASK(SUN9I_A80_PLL_N_SHIFT + SUN9I_A80_PLL_N_WIDTH - 1,
SUN9I_A80_PLL_N_SHIFT);
val |= 17 << SUN9I_A80_PLL_N_SHIFT;
/* And clear P */
val &= ~BIT(SUN9I_A80_PLL_P_SHIFT);
writel(val, reg);
}
clk: sunxi-ng: Add A80 CCU Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-28 15:22:34 +03:00
static int sun9i_a80_ccu_probe(struct platform_device *pdev)
{
struct resource *res;
void __iomem *reg;
u32 val;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
reg = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(reg))
return PTR_ERR(reg);
/* Enforce d1 = 0, d2 = 0 for Audio PLL */
val = readl(reg + SUN9I_A80_PLL_AUDIO_REG);
clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18 The zero'ing of bits 16 and 18 is incorrect. Currently the code is masking with the bitwise-and of BIT(16) & BIT(18) which is 0, so the updated value for val is always zero. Fix this by bitwise and-ing value with the correct mask that will zero bits 16 and 18. Addresses-Coverity: (" Suspicious &= or |= constant expression") Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-23 14:28:09 +03:00
val &= ~(BIT(16) | BIT(18));
clk: sunxi-ng: Add A80 CCU Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-28 15:22:34 +03:00
writel(val, reg + SUN9I_A80_PLL_AUDIO_REG);
clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks The CPU cluster PLLs on the A80 are NP clocks that are atypical in two ways: - The P factor is 1 bit wide, and translates to a /1 or /4 divider. - The P factor should only be used for output frequencies lower than 288 MHz. The N factor has a lower limit of 12, which likely contributed to this extra divider. According to the user manual, the clocks can only go as low as 200 MHz. The vendor BSP kernel does not even define operating points below 360 MHz for these clocks. The lower end for cpufreq in the vendor kernel is even higher. The mainline Linux kernel doesn't support cpufreq for the A80 at the moment. This means the lower frequencies are untested, and will likely remain unused. The new sunxi-ng style clocks don't support the quirks listed above. Instead of trying to work the quirks in for something of little usage, we re-model the clocks into N-type multipler clocks, with P fixed at 1. At probe time we check if P is set to 4, and fix it up if needed. This is highly unlikely though. Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 09:37:43 +03:00
/* Enforce P = 1 for both CPU cluster PLLs */
sun9i_a80_cpu_pll_fixup(reg + SUN9I_A80_PLL_C0CPUX_REG);
sun9i_a80_cpu_pll_fixup(reg + SUN9I_A80_PLL_C1CPUX_REG);
clk: sunxi-ng: Add A80 CCU Add support for the main clock unit found in the A80. Some clocks were not documented in the released user manual, but were found in the official kernel from Allwinner. These include controls for the I2S, SPDIF, SATA, and eDP blocks. Note that on the A80, some subsystems have separate clock controllers downstream of the main clock unit. These include the MMC, USB, and display engine subsystems. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-28 15:22:34 +03:00
return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun9i_a80_ccu_desc);
}
static const struct of_device_id sun9i_a80_ccu_ids[] = {
{ .compatible = "allwinner,sun9i-a80-ccu" },
{ }
};
static struct platform_driver sun9i_a80_ccu_driver = {
.probe = sun9i_a80_ccu_probe,
.driver = {
.name = "sun9i-a80-ccu",
.of_match_table = sun9i_a80_ccu_ids,
},
};
builtin_platform_driver(sun9i_a80_ccu_driver);
Reference in New Issue Copy Permalink