linux/arch/x86/kvm/pmu.c

660 lines
18 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Kernel-based Virtual Machine -- Performance Monitoring Unit support
*
* Copyright 2015 Red Hat, Inc. and/or its affiliates.
*
* Authors:
* Avi Kivity <avi@redhat.com>
* Gleb Natapov <gleb@redhat.com>
* Wei Huang <wei@redhat.com>
*/
#include <linux/types.h>
#include <linux/kvm_host.h>
#include <linux/perf_event.h>
#include <linux/bsearch.h>
#include <linux/sort.h>
#include <asm/perf_event.h>
#include <asm/cpu_device_id.h>
#include "x86.h"
#include "cpuid.h"
#include "lapic.h"
#include "pmu.h"
/* This is enough to filter the vast majority of currently defined events. */
#define KVM_PMU_EVENT_FILTER_MAX_EVENTS 300
struct x86_pmu_capability __read_mostly kvm_pmu_cap;
EXPORT_SYMBOL_GPL(kvm_pmu_cap);
static const struct x86_cpu_id vmx_icl_pebs_cpu[] = {
X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D, NULL),
X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X, NULL),
{}
};
/* NOTE:
* - Each perf counter is defined as "struct kvm_pmc";
* - There are two types of perf counters: general purpose (gp) and fixed.
* gp counters are stored in gp_counters[] and fixed counters are stored
* in fixed_counters[] respectively. Both of them are part of "struct
* kvm_pmu";
* - pmu.c understands the difference between gp counters and fixed counters.
* However AMD doesn't support fixed-counters;
* - There are three types of index to access perf counters (PMC):
* 1. MSR (named msr): For example Intel has MSR_IA32_PERFCTRn and AMD
* has MSR_K7_PERFCTRn and, for families 15H and later,
* MSR_F15H_PERF_CTRn, where MSR_F15H_PERF_CTR[0-3] are
* aliased to MSR_K7_PERFCTRn.
* 2. MSR Index (named idx): This normally is used by RDPMC instruction.
* For instance AMD RDPMC instruction uses 0000_0003h in ECX to access
* C001_0007h (MSR_K7_PERCTR3). Intel has a similar mechanism, except
* that it also supports fixed counters. idx can be used to as index to
* gp and fixed counters.
* 3. Global PMC Index (named pmc): pmc is an index specific to PMU
* code. Each pmc, stored in kvm_pmc.idx field, is unique across
* all perf counters (both gp and fixed). The mapping relationship
* between pmc and perf counters is as the following:
* * Intel: [0 .. INTEL_PMC_MAX_GENERIC-1] <=> gp counters
* [INTEL_PMC_IDX_FIXED .. INTEL_PMC_IDX_FIXED + 2] <=> fixed
* * AMD: [0 .. AMD64_NUM_COUNTERS-1] and, for families 15H
* and later, [0 .. AMD64_NUM_COUNTERS_CORE-1] <=> gp counters
*/
static struct kvm_pmu_ops kvm_pmu_ops __read_mostly;
#define KVM_X86_PMU_OP(func) \
DEFINE_STATIC_CALL_NULL(kvm_x86_pmu_##func, \
*(((struct kvm_pmu_ops *)0)->func));
#define KVM_X86_PMU_OP_OPTIONAL KVM_X86_PMU_OP
#include <asm/kvm-x86-pmu-ops.h>
void kvm_pmu_ops_update(const struct kvm_pmu_ops *pmu_ops)
{
memcpy(&kvm_pmu_ops, pmu_ops, sizeof(kvm_pmu_ops));
#define __KVM_X86_PMU_OP(func) \
static_call_update(kvm_x86_pmu_##func, kvm_pmu_ops.func);
#define KVM_X86_PMU_OP(func) \
WARN_ON(!kvm_pmu_ops.func); __KVM_X86_PMU_OP(func)
#define KVM_X86_PMU_OP_OPTIONAL __KVM_X86_PMU_OP
#include <asm/kvm-x86-pmu-ops.h>
#undef __KVM_X86_PMU_OP
}
static inline bool pmc_is_enabled(struct kvm_pmc *pmc)
{
return static_call(kvm_x86_pmu_pmc_is_enabled)(pmc);
}
static void kvm_pmi_trigger_fn(struct irq_work *irq_work)
{
struct kvm_pmu *pmu = container_of(irq_work, struct kvm_pmu, irq_work);
struct kvm_vcpu *vcpu = pmu_to_vcpu(pmu);
kvm_pmu_deliver_pmi(vcpu);
}
static inline void __kvm_perf_overflow(struct kvm_pmc *pmc, bool in_pmi)
{
struct kvm_pmu *pmu = pmc_to_pmu(pmc);
bool skip_pmi = false;
/* Ignore counters that have been reprogrammed already. */
if (test_and_set_bit(pmc->idx, pmu->reprogram_pmi))
return;
if (pmc->perf_event && pmc->perf_event->attr.precise_ip) {
/* Indicate PEBS overflow PMI to guest. */
skip_pmi = __test_and_set_bit(GLOBAL_STATUS_BUFFER_OVF_BIT,
(unsigned long *)&pmu->global_status);
} else {
__set_bit(pmc->idx, (unsigned long *)&pmu->global_status);
}
kvm_make_request(KVM_REQ_PMU, pmc->vcpu);
if (!pmc->intr || skip_pmi)
return;
/*
* Inject PMI. If vcpu was in a guest mode during NMI PMI
* can be ejected on a guest mode re-entry. Otherwise we can't
* be sure that vcpu wasn't executing hlt instruction at the
* time of vmexit and is not going to re-enter guest mode until
* woken up. So we should wake it, but this is impossible from
* NMI context. Do it from irq work instead.
*/
RISCV: - Use common KVM implementation of MMU memory caches - SBI v0.2 support for Guest - Initial KVM selftests support - Fix to avoid spurious virtual interrupts after clearing hideleg CSR - Update email address for Anup and Atish ARM: - Simplification of the 'vcpu first run' by integrating it into KVM's 'pid change' flow - Refactoring of the FP and SVE state tracking, also leading to a simpler state and less shared data between EL1 and EL2 in the nVHE case - Tidy up the header file usage for the nvhe hyp object - New HYP unsharing mechanism, finally allowing pages to be unmapped from the Stage-1 EL2 page-tables - Various pKVM cleanups around refcounting and sharing - A couple of vgic fixes for bugs that would trigger once the vcpu xarray rework is merged, but not sooner - Add minimal support for ARMv8.7's PMU extension - Rework kvm_pgtable initialisation ahead of the NV work - New selftest for IRQ injection - Teach selftests about the lack of default IPA space and page sizes - Expand sysreg selftest to deal with Pointer Authentication - The usual bunch of cleanups and doc update s390: - fix sigp sense/start/stop/inconsistency - cleanups x86: - Clean up some function prototypes more - improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation - add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery - completely remove potential TOC/TOU races in nested SVM consistency checks - update some PMCs on emulated instructions - Intel AMX support (joint work between Thomas and Intel) - large MMU cleanups - module parameter to disable PMU virtualization - cleanup register cache - first part of halt handling cleanups - Hyper-V enlightened MSR bitmap support for nested hypervisors Generic: - clean up Makefiles - introduce CONFIG_HAVE_KVM_DIRTY_RING - optimize memslot lookup using a tree - optimize vCPU array usage by converting to xarray -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHhxvsUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroPZkAf+Nz92UL/5nNGcdHtE4m7AToMmitE9 bYkesf9BMQvAe5wjkABLuoHGi6ay4jabo4fiGzbdkiK7lO5YgfsWiMB3/MT5fl4E jRPzaVQabp3YZLM8UYCBmfUVuRj524S967SfSRe0AvYjDEH8y7klPf4+7sCsFT0/ Px9Vf2KGuOlf0eM78yKg4rGaF0jS22eLgXm6FfNMY8/e29ZAo/jyUmqBY+Z2xxZG aWhceDtSheW1jwLHLj3nOlQJvHTn8LVGXBE/R8Gda3ZjrBV2rKaDi4Fh+HD+dz86 2zVXwzQ7uck2CMW73GMoXMTWoKSHMyvlBOs1BdvBm4UsnGcXR+q8IFCeuQ== =s73m -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "RISCV: - Use common KVM implementation of MMU memory caches - SBI v0.2 support for Guest - Initial KVM selftests support - Fix to avoid spurious virtual interrupts after clearing hideleg CSR - Update email address for Anup and Atish ARM: - Simplification of the 'vcpu first run' by integrating it into KVM's 'pid change' flow - Refactoring of the FP and SVE state tracking, also leading to a simpler state and less shared data between EL1 and EL2 in the nVHE case - Tidy up the header file usage for the nvhe hyp object - New HYP unsharing mechanism, finally allowing pages to be unmapped from the Stage-1 EL2 page-tables - Various pKVM cleanups around refcounting and sharing - A couple of vgic fixes for bugs that would trigger once the vcpu xarray rework is merged, but not sooner - Add minimal support for ARMv8.7's PMU extension - Rework kvm_pgtable initialisation ahead of the NV work - New selftest for IRQ injection - Teach selftests about the lack of default IPA space and page sizes - Expand sysreg selftest to deal with Pointer Authentication - The usual bunch of cleanups and doc update s390: - fix sigp sense/start/stop/inconsistency - cleanups x86: - Clean up some function prototypes more - improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation - add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery - completely remove potential TOC/TOU races in nested SVM consistency checks - update some PMCs on emulated instructions - Intel AMX support (joint work between Thomas and Intel) - large MMU cleanups - module parameter to disable PMU virtualization - cleanup register cache - first part of halt handling cleanups - Hyper-V enlightened MSR bitmap support for nested hypervisors Generic: - clean up Makefiles - introduce CONFIG_HAVE_KVM_DIRTY_RING - optimize memslot lookup using a tree - optimize vCPU array usage by converting to xarray" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits) x86/fpu: Fix inline prefix warnings selftest: kvm: Add amx selftest selftest: kvm: Move struct kvm_x86_state to header selftest: kvm: Reorder vcpu_load_state steps for AMX kvm: x86: Disable interception for IA32_XFD on demand x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state() kvm: selftests: Add support for KVM_CAP_XSAVE2 kvm: x86: Add support for getting/setting expanded xstate buffer x86/fpu: Add uabi_size to guest_fpu kvm: x86: Add CPUID support for Intel AMX kvm: x86: Add XCR0 support for Intel AMX kvm: x86: Disable RDMSR interception of IA32_XFD_ERR kvm: x86: Emulate IA32_XFD_ERR for guest kvm: x86: Intercept #NM for saving IA32_XFD_ERR x86/fpu: Prepare xfd_err in struct fpu_guest kvm: x86: Add emulation for IA32_XFD x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2 x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM x86/fpu: Add guest support to xfd_enable_feature() ...
2022-01-16 17:15:14 +03:00
if (in_pmi && !kvm_handling_nmi_from_guest(pmc->vcpu))
irq_work_queue(&pmc_to_pmu(pmc)->irq_work);
else
kvm_make_request(KVM_REQ_PMI, pmc->vcpu);
}
static void kvm_perf_overflow(struct perf_event *perf_event,
struct perf_sample_data *data,
struct pt_regs *regs)
{
struct kvm_pmc *pmc = perf_event->overflow_handler_context;
__kvm_perf_overflow(pmc, true);
}
static void pmc_reprogram_counter(struct kvm_pmc *pmc, u32 type,
u64 config, bool exclude_user,
bool exclude_kernel, bool intr)
{
struct kvm_pmu *pmu = pmc_to_pmu(pmc);
struct perf_event *event;
struct perf_event_attr attr = {
.type = type,
.size = sizeof(attr),
.pinned = true,
.exclude_idle = true,
.exclude_host = 1,
.exclude_user = exclude_user,
.exclude_kernel = exclude_kernel,
.config = config,
};
bool pebs = test_bit(pmc->idx, (unsigned long *)&pmu->pebs_enable);
if (type == PERF_TYPE_HARDWARE && config >= PERF_COUNT_HW_MAX)
return;
attr.sample_period = get_sample_period(pmc, pmc->counter);
if ((attr.config & HSW_IN_TX_CHECKPOINTED) &&
guest_cpuid_is_intel(pmc->vcpu)) {
/*
* HSW_IN_TX_CHECKPOINTED is not supported with nonzero
* period. Just clear the sample period so at least
* allocating the counter doesn't fail.
*/
attr.sample_period = 0;
}
if (pebs) {
/*
* The non-zero precision level of guest event makes the ordinary
* guest event becomes a guest PEBS event and triggers the host
* PEBS PMI handler to determine whether the PEBS overflow PMI
* comes from the host counters or the guest.
*
* For most PEBS hardware events, the difference in the software
* precision levels of guest and host PEBS events will not affect
* the accuracy of the PEBS profiling result, because the "event IP"
* in the PEBS record is calibrated on the guest side.
*
* On Icelake everything is fine. Other hardware (GLC+, TNT+) that
* could possibly care here is unsupported and needs changes.
*/
attr.precise_ip = 1;
if (x86_match_cpu(vmx_icl_pebs_cpu) && pmc->idx == 32)
attr.precise_ip = 3;
}
event = perf_event_create_kernel_counter(&attr, -1, current,
kvm_perf_overflow, pmc);
if (IS_ERR(event)) {
pr_debug_ratelimited("kvm_pmu: event creation failed %ld for pmc->idx = %d\n",
PTR_ERR(event), pmc->idx);
return;
}
pmc->perf_event = event;
pmc_to_pmu(pmc)->event_count++;
clear_bit(pmc->idx, pmc_to_pmu(pmc)->reprogram_pmi);
KVM: x86/pmu: Introduce pmc->is_paused to reduce the call time of perf interfaces Based on our observations, after any vm-exit associated with vPMU, there are at least two or more perf interfaces to be called for guest counter emulation, such as perf_event_{pause, read_value, period}(), and each one will {lock, unlock} the same perf_event_ctx. The frequency of calls becomes more severe when guest use counters in a multiplexed manner. Holding a lock once and completing the KVM request operations in the perf context would introduce a set of impractical new interfaces. So we can further optimize the vPMU implementation by avoiding repeated calls to these interfaces in the KVM context for at least one pattern: After we call perf_event_pause() once, the event will be disabled and its internal count will be reset to 0. So there is no need to pause it again or read its value. Once the event is paused, event period will not be updated until the next time it's resumed or reprogrammed. And there is also no need to call perf_event_period twice for a non-running counter, considering the perf_event for a running counter is never paused. Based on this implementation, for the following common usage of sampling 4 events using perf on a 4u8g guest: echo 0 > /proc/sys/kernel/watchdog echo 25 > /proc/sys/kernel/perf_cpu_time_max_percent echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate echo 0 > /proc/sys/kernel/perf_cpu_time_max_percent for i in `seq 1 1 10` do taskset -c 0 perf record \ -e cpu-cycles -e instructions -e branch-instructions -e cache-misses \ /root/br_instr a done the average latency of the guest NMI handler is reduced from 37646.7 ns to 32929.3 ns (~1.14x speed up) on the Intel ICX server. Also, in addition to collecting more samples, no loss of sampling accuracy was observed compared to before the optimization. Signed-off-by: Like Xu <likexu@tencent.com> Message-Id: <20210728120705.6855-1-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org>
2021-07-28 15:07:05 +03:00
pmc->is_paused = false;
pmc->intr = intr || pebs;
}
KVM: x86/vPMU: Reuse perf_event to avoid unnecessary pmc_reprogram_counter The perf_event_create_kernel_counter() in the pmc_reprogram_counter() is a heavyweight and high-frequency operation, especially when host disables the watchdog (maximum 21000000 ns) which leads to an unacceptable latency of the guest NMI handler. It limits the use of vPMUs in the guest. When a vPMC is fully enabled, the legacy reprogram_*_counter() would stop and release its existing perf_event (if any) every time EVEN in most cases almost the same requested perf_event will be created and configured again. For each vPMC, if the reuqested config ('u64 eventsel' for gp and 'u8 ctrl' for fixed) is the same as its current config AND a new sample period based on pmc->counter is accepted by host perf interface, the current event could be reused safely as a new created one does. Otherwise, do release the undesirable perf_event and reprogram a new one as usual. It's light-weight to call pmc_pause_counter (disable, read and reset event) and pmc_resume_counter (recalibrate period and re-enable event) as guest expects instead of release-and-create again on any condition. Compared to use the filterable event->attr or hw.config, a new 'u64 current_config' field is added to save the last original programed config for each vPMC. Based on this implementation, the number of calls to pmc_reprogram_counter is reduced by ~82.5% for a gp sampling event and ~99.9% for a fixed event. In the usage of multiplexing perf sampling mode, the average latency of the guest NMI handler is reduced from 104923 ns to 48393 ns (~2.16x speed up). If host disables watchdog, the minimum latecy of guest NMI handler could be speed up at ~3413x (from 20407603 to 5979 ns) and at ~786x in the average. Suggested-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-27 13:52:42 +03:00
static void pmc_pause_counter(struct kvm_pmc *pmc)
{
u64 counter = pmc->counter;
KVM: x86/pmu: Introduce pmc->is_paused to reduce the call time of perf interfaces Based on our observations, after any vm-exit associated with vPMU, there are at least two or more perf interfaces to be called for guest counter emulation, such as perf_event_{pause, read_value, period}(), and each one will {lock, unlock} the same perf_event_ctx. The frequency of calls becomes more severe when guest use counters in a multiplexed manner. Holding a lock once and completing the KVM request operations in the perf context would introduce a set of impractical new interfaces. So we can further optimize the vPMU implementation by avoiding repeated calls to these interfaces in the KVM context for at least one pattern: After we call perf_event_pause() once, the event will be disabled and its internal count will be reset to 0. So there is no need to pause it again or read its value. Once the event is paused, event period will not be updated until the next time it's resumed or reprogrammed. And there is also no need to call perf_event_period twice for a non-running counter, considering the perf_event for a running counter is never paused. Based on this implementation, for the following common usage of sampling 4 events using perf on a 4u8g guest: echo 0 > /proc/sys/kernel/watchdog echo 25 > /proc/sys/kernel/perf_cpu_time_max_percent echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate echo 0 > /proc/sys/kernel/perf_cpu_time_max_percent for i in `seq 1 1 10` do taskset -c 0 perf record \ -e cpu-cycles -e instructions -e branch-instructions -e cache-misses \ /root/br_instr a done the average latency of the guest NMI handler is reduced from 37646.7 ns to 32929.3 ns (~1.14x speed up) on the Intel ICX server. Also, in addition to collecting more samples, no loss of sampling accuracy was observed compared to before the optimization. Signed-off-by: Like Xu <likexu@tencent.com> Message-Id: <20210728120705.6855-1-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org>
2021-07-28 15:07:05 +03:00
if (!pmc->perf_event || pmc->is_paused)
KVM: x86/vPMU: Reuse perf_event to avoid unnecessary pmc_reprogram_counter The perf_event_create_kernel_counter() in the pmc_reprogram_counter() is a heavyweight and high-frequency operation, especially when host disables the watchdog (maximum 21000000 ns) which leads to an unacceptable latency of the guest NMI handler. It limits the use of vPMUs in the guest. When a vPMC is fully enabled, the legacy reprogram_*_counter() would stop and release its existing perf_event (if any) every time EVEN in most cases almost the same requested perf_event will be created and configured again. For each vPMC, if the reuqested config ('u64 eventsel' for gp and 'u8 ctrl' for fixed) is the same as its current config AND a new sample period based on pmc->counter is accepted by host perf interface, the current event could be reused safely as a new created one does. Otherwise, do release the undesirable perf_event and reprogram a new one as usual. It's light-weight to call pmc_pause_counter (disable, read and reset event) and pmc_resume_counter (recalibrate period and re-enable event) as guest expects instead of release-and-create again on any condition. Compared to use the filterable event->attr or hw.config, a new 'u64 current_config' field is added to save the last original programed config for each vPMC. Based on this implementation, the number of calls to pmc_reprogram_counter is reduced by ~82.5% for a gp sampling event and ~99.9% for a fixed event. In the usage of multiplexing perf sampling mode, the average latency of the guest NMI handler is reduced from 104923 ns to 48393 ns (~2.16x speed up). If host disables watchdog, the minimum latecy of guest NMI handler could be speed up at ~3413x (from 20407603 to 5979 ns) and at ~786x in the average. Suggested-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-27 13:52:42 +03:00
return;
/* update counter, reset event value to avoid redundant accumulation */
counter += perf_event_pause(pmc->perf_event, true);
pmc->counter = counter & pmc_bitmask(pmc);
KVM: x86/pmu: Introduce pmc->is_paused to reduce the call time of perf interfaces Based on our observations, after any vm-exit associated with vPMU, there are at least two or more perf interfaces to be called for guest counter emulation, such as perf_event_{pause, read_value, period}(), and each one will {lock, unlock} the same perf_event_ctx. The frequency of calls becomes more severe when guest use counters in a multiplexed manner. Holding a lock once and completing the KVM request operations in the perf context would introduce a set of impractical new interfaces. So we can further optimize the vPMU implementation by avoiding repeated calls to these interfaces in the KVM context for at least one pattern: After we call perf_event_pause() once, the event will be disabled and its internal count will be reset to 0. So there is no need to pause it again or read its value. Once the event is paused, event period will not be updated until the next time it's resumed or reprogrammed. And there is also no need to call perf_event_period twice for a non-running counter, considering the perf_event for a running counter is never paused. Based on this implementation, for the following common usage of sampling 4 events using perf on a 4u8g guest: echo 0 > /proc/sys/kernel/watchdog echo 25 > /proc/sys/kernel/perf_cpu_time_max_percent echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate echo 0 > /proc/sys/kernel/perf_cpu_time_max_percent for i in `seq 1 1 10` do taskset -c 0 perf record \ -e cpu-cycles -e instructions -e branch-instructions -e cache-misses \ /root/br_instr a done the average latency of the guest NMI handler is reduced from 37646.7 ns to 32929.3 ns (~1.14x speed up) on the Intel ICX server. Also, in addition to collecting more samples, no loss of sampling accuracy was observed compared to before the optimization. Signed-off-by: Like Xu <likexu@tencent.com> Message-Id: <20210728120705.6855-1-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org>
2021-07-28 15:07:05 +03:00
pmc->is_paused = true;
KVM: x86/vPMU: Reuse perf_event to avoid unnecessary pmc_reprogram_counter The perf_event_create_kernel_counter() in the pmc_reprogram_counter() is a heavyweight and high-frequency operation, especially when host disables the watchdog (maximum 21000000 ns) which leads to an unacceptable latency of the guest NMI handler. It limits the use of vPMUs in the guest. When a vPMC is fully enabled, the legacy reprogram_*_counter() would stop and release its existing perf_event (if any) every time EVEN in most cases almost the same requested perf_event will be created and configured again. For each vPMC, if the reuqested config ('u64 eventsel' for gp and 'u8 ctrl' for fixed) is the same as its current config AND a new sample period based on pmc->counter is accepted by host perf interface, the current event could be reused safely as a new created one does. Otherwise, do release the undesirable perf_event and reprogram a new one as usual. It's light-weight to call pmc_pause_counter (disable, read and reset event) and pmc_resume_counter (recalibrate period and re-enable event) as guest expects instead of release-and-create again on any condition. Compared to use the filterable event->attr or hw.config, a new 'u64 current_config' field is added to save the last original programed config for each vPMC. Based on this implementation, the number of calls to pmc_reprogram_counter is reduced by ~82.5% for a gp sampling event and ~99.9% for a fixed event. In the usage of multiplexing perf sampling mode, the average latency of the guest NMI handler is reduced from 104923 ns to 48393 ns (~2.16x speed up). If host disables watchdog, the minimum latecy of guest NMI handler could be speed up at ~3413x (from 20407603 to 5979 ns) and at ~786x in the average. Suggested-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-27 13:52:42 +03:00
}
static bool pmc_resume_counter(struct kvm_pmc *pmc)
{
if (!pmc->perf_event)
return false;
/* recalibrate sample period and check if it's accepted by perf core */
if (perf_event_period(pmc->perf_event,
get_sample_period(pmc, pmc->counter)))
KVM: x86/vPMU: Reuse perf_event to avoid unnecessary pmc_reprogram_counter The perf_event_create_kernel_counter() in the pmc_reprogram_counter() is a heavyweight and high-frequency operation, especially when host disables the watchdog (maximum 21000000 ns) which leads to an unacceptable latency of the guest NMI handler. It limits the use of vPMUs in the guest. When a vPMC is fully enabled, the legacy reprogram_*_counter() would stop and release its existing perf_event (if any) every time EVEN in most cases almost the same requested perf_event will be created and configured again. For each vPMC, if the reuqested config ('u64 eventsel' for gp and 'u8 ctrl' for fixed) is the same as its current config AND a new sample period based on pmc->counter is accepted by host perf interface, the current event could be reused safely as a new created one does. Otherwise, do release the undesirable perf_event and reprogram a new one as usual. It's light-weight to call pmc_pause_counter (disable, read and reset event) and pmc_resume_counter (recalibrate period and re-enable event) as guest expects instead of release-and-create again on any condition. Compared to use the filterable event->attr or hw.config, a new 'u64 current_config' field is added to save the last original programed config for each vPMC. Based on this implementation, the number of calls to pmc_reprogram_counter is reduced by ~82.5% for a gp sampling event and ~99.9% for a fixed event. In the usage of multiplexing perf sampling mode, the average latency of the guest NMI handler is reduced from 104923 ns to 48393 ns (~2.16x speed up). If host disables watchdog, the minimum latecy of guest NMI handler could be speed up at ~3413x (from 20407603 to 5979 ns) and at ~786x in the average. Suggested-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-27 13:52:42 +03:00
return false;
if (!test_bit(pmc->idx, (unsigned long *)&pmc_to_pmu(pmc)->pebs_enable) &&
pmc->perf_event->attr.precise_ip)
return false;
KVM: x86/vPMU: Reuse perf_event to avoid unnecessary pmc_reprogram_counter The perf_event_create_kernel_counter() in the pmc_reprogram_counter() is a heavyweight and high-frequency operation, especially when host disables the watchdog (maximum 21000000 ns) which leads to an unacceptable latency of the guest NMI handler. It limits the use of vPMUs in the guest. When a vPMC is fully enabled, the legacy reprogram_*_counter() would stop and release its existing perf_event (if any) every time EVEN in most cases almost the same requested perf_event will be created and configured again. For each vPMC, if the reuqested config ('u64 eventsel' for gp and 'u8 ctrl' for fixed) is the same as its current config AND a new sample period based on pmc->counter is accepted by host perf interface, the current event could be reused safely as a new created one does. Otherwise, do release the undesirable perf_event and reprogram a new one as usual. It's light-weight to call pmc_pause_counter (disable, read and reset event) and pmc_resume_counter (recalibrate period and re-enable event) as guest expects instead of release-and-create again on any condition. Compared to use the filterable event->attr or hw.config, a new 'u64 current_config' field is added to save the last original programed config for each vPMC. Based on this implementation, the number of calls to pmc_reprogram_counter is reduced by ~82.5% for a gp sampling event and ~99.9% for a fixed event. In the usage of multiplexing perf sampling mode, the average latency of the guest NMI handler is reduced from 104923 ns to 48393 ns (~2.16x speed up). If host disables watchdog, the minimum latecy of guest NMI handler could be speed up at ~3413x (from 20407603 to 5979 ns) and at ~786x in the average. Suggested-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-27 13:52:42 +03:00
/* reuse perf_event to serve as pmc_reprogram_counter() does*/
perf_event_enable(pmc->perf_event);
KVM: x86/pmu: Introduce pmc->is_paused to reduce the call time of perf interfaces Based on our observations, after any vm-exit associated with vPMU, there are at least two or more perf interfaces to be called for guest counter emulation, such as perf_event_{pause, read_value, period}(), and each one will {lock, unlock} the same perf_event_ctx. The frequency of calls becomes more severe when guest use counters in a multiplexed manner. Holding a lock once and completing the KVM request operations in the perf context would introduce a set of impractical new interfaces. So we can further optimize the vPMU implementation by avoiding repeated calls to these interfaces in the KVM context for at least one pattern: After we call perf_event_pause() once, the event will be disabled and its internal count will be reset to 0. So there is no need to pause it again or read its value. Once the event is paused, event period will not be updated until the next time it's resumed or reprogrammed. And there is also no need to call perf_event_period twice for a non-running counter, considering the perf_event for a running counter is never paused. Based on this implementation, for the following common usage of sampling 4 events using perf on a 4u8g guest: echo 0 > /proc/sys/kernel/watchdog echo 25 > /proc/sys/kernel/perf_cpu_time_max_percent echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate echo 0 > /proc/sys/kernel/perf_cpu_time_max_percent for i in `seq 1 1 10` do taskset -c 0 perf record \ -e cpu-cycles -e instructions -e branch-instructions -e cache-misses \ /root/br_instr a done the average latency of the guest NMI handler is reduced from 37646.7 ns to 32929.3 ns (~1.14x speed up) on the Intel ICX server. Also, in addition to collecting more samples, no loss of sampling accuracy was observed compared to before the optimization. Signed-off-by: Like Xu <likexu@tencent.com> Message-Id: <20210728120705.6855-1-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org>
2021-07-28 15:07:05 +03:00
pmc->is_paused = false;
KVM: x86/vPMU: Reuse perf_event to avoid unnecessary pmc_reprogram_counter The perf_event_create_kernel_counter() in the pmc_reprogram_counter() is a heavyweight and high-frequency operation, especially when host disables the watchdog (maximum 21000000 ns) which leads to an unacceptable latency of the guest NMI handler. It limits the use of vPMUs in the guest. When a vPMC is fully enabled, the legacy reprogram_*_counter() would stop and release its existing perf_event (if any) every time EVEN in most cases almost the same requested perf_event will be created and configured again. For each vPMC, if the reuqested config ('u64 eventsel' for gp and 'u8 ctrl' for fixed) is the same as its current config AND a new sample period based on pmc->counter is accepted by host perf interface, the current event could be reused safely as a new created one does. Otherwise, do release the undesirable perf_event and reprogram a new one as usual. It's light-weight to call pmc_pause_counter (disable, read and reset event) and pmc_resume_counter (recalibrate period and re-enable event) as guest expects instead of release-and-create again on any condition. Compared to use the filterable event->attr or hw.config, a new 'u64 current_config' field is added to save the last original programed config for each vPMC. Based on this implementation, the number of calls to pmc_reprogram_counter is reduced by ~82.5% for a gp sampling event and ~99.9% for a fixed event. In the usage of multiplexing perf sampling mode, the average latency of the guest NMI handler is reduced from 104923 ns to 48393 ns (~2.16x speed up). If host disables watchdog, the minimum latecy of guest NMI handler could be speed up at ~3413x (from 20407603 to 5979 ns) and at ~786x in the average. Suggested-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-27 13:52:42 +03:00
clear_bit(pmc->idx, (unsigned long *)&pmc_to_pmu(pmc)->reprogram_pmi);
return true;
}
static int cmp_u64(const void *pa, const void *pb)
{
u64 a = *(u64 *)pa;
u64 b = *(u64 *)pb;
return (a > b) - (a < b);
}
static bool check_pmu_event_filter(struct kvm_pmc *pmc)
{
struct kvm_pmu_event_filter *filter;
struct kvm *kvm = pmc->vcpu->kvm;
bool allow_event = true;
__u64 key;
int idx;
filter = srcu_dereference(kvm->arch.pmu_event_filter, &kvm->srcu);
if (!filter)
goto out;
if (pmc_is_gp(pmc)) {
key = pmc->eventsel & AMD64_RAW_EVENT_MASK_NB;
if (bsearch(&key, filter->events, filter->nevents,
sizeof(__u64), cmp_u64))
allow_event = filter->action == KVM_PMU_EVENT_ALLOW;
else
allow_event = filter->action == KVM_PMU_EVENT_DENY;
} else {
idx = pmc->idx - INTEL_PMC_IDX_FIXED;
if (filter->action == KVM_PMU_EVENT_DENY &&
test_bit(idx, (ulong *)&filter->fixed_counter_bitmap))
allow_event = false;
if (filter->action == KVM_PMU_EVENT_ALLOW &&
!test_bit(idx, (ulong *)&filter->fixed_counter_bitmap))
allow_event = false;
}
out:
return allow_event;
}
void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel)
{
u64 config;
u32 type = PERF_TYPE_RAW;
struct kvm_pmu *pmu = pmc_to_pmu(pmc);
if (eventsel & ARCH_PERFMON_EVENTSEL_PIN_CONTROL)
printk_once("kvm pmu: pin control bit is ignored\n");
pmc->eventsel = eventsel;
KVM: x86/vPMU: Reuse perf_event to avoid unnecessary pmc_reprogram_counter The perf_event_create_kernel_counter() in the pmc_reprogram_counter() is a heavyweight and high-frequency operation, especially when host disables the watchdog (maximum 21000000 ns) which leads to an unacceptable latency of the guest NMI handler. It limits the use of vPMUs in the guest. When a vPMC is fully enabled, the legacy reprogram_*_counter() would stop and release its existing perf_event (if any) every time EVEN in most cases almost the same requested perf_event will be created and configured again. For each vPMC, if the reuqested config ('u64 eventsel' for gp and 'u8 ctrl' for fixed) is the same as its current config AND a new sample period based on pmc->counter is accepted by host perf interface, the current event could be reused safely as a new created one does. Otherwise, do release the undesirable perf_event and reprogram a new one as usual. It's light-weight to call pmc_pause_counter (disable, read and reset event) and pmc_resume_counter (recalibrate period and re-enable event) as guest expects instead of release-and-create again on any condition. Compared to use the filterable event->attr or hw.config, a new 'u64 current_config' field is added to save the last original programed config for each vPMC. Based on this implementation, the number of calls to pmc_reprogram_counter is reduced by ~82.5% for a gp sampling event and ~99.9% for a fixed event. In the usage of multiplexing perf sampling mode, the average latency of the guest NMI handler is reduced from 104923 ns to 48393 ns (~2.16x speed up). If host disables watchdog, the minimum latecy of guest NMI handler could be speed up at ~3413x (from 20407603 to 5979 ns) and at ~786x in the average. Suggested-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-27 13:52:42 +03:00
pmc_pause_counter(pmc);
if (!(eventsel & ARCH_PERFMON_EVENTSEL_ENABLE) || !pmc_is_enabled(pmc))
return;
if (!check_pmu_event_filter(pmc))
return;
if (!(eventsel & (ARCH_PERFMON_EVENTSEL_EDGE |
ARCH_PERFMON_EVENTSEL_INV |
ARCH_PERFMON_EVENTSEL_CMASK |
HSW_IN_TX |
HSW_IN_TX_CHECKPOINTED))) {
config = static_call(kvm_x86_pmu_pmc_perf_hw_id)(pmc);
if (config != PERF_COUNT_HW_MAX)
type = PERF_TYPE_HARDWARE;
}
if (type == PERF_TYPE_RAW)
config = eventsel & pmu->raw_event_mask;
KVM: x86/vPMU: Reuse perf_event to avoid unnecessary pmc_reprogram_counter The perf_event_create_kernel_counter() in the pmc_reprogram_counter() is a heavyweight and high-frequency operation, especially when host disables the watchdog (maximum 21000000 ns) which leads to an unacceptable latency of the guest NMI handler. It limits the use of vPMUs in the guest. When a vPMC is fully enabled, the legacy reprogram_*_counter() would stop and release its existing perf_event (if any) every time EVEN in most cases almost the same requested perf_event will be created and configured again. For each vPMC, if the reuqested config ('u64 eventsel' for gp and 'u8 ctrl' for fixed) is the same as its current config AND a new sample period based on pmc->counter is accepted by host perf interface, the current event could be reused safely as a new created one does. Otherwise, do release the undesirable perf_event and reprogram a new one as usual. It's light-weight to call pmc_pause_counter (disable, read and reset event) and pmc_resume_counter (recalibrate period and re-enable event) as guest expects instead of release-and-create again on any condition. Compared to use the filterable event->attr or hw.config, a new 'u64 current_config' field is added to save the last original programed config for each vPMC. Based on this implementation, the number of calls to pmc_reprogram_counter is reduced by ~82.5% for a gp sampling event and ~99.9% for a fixed event. In the usage of multiplexing perf sampling mode, the average latency of the guest NMI handler is reduced from 104923 ns to 48393 ns (~2.16x speed up). If host disables watchdog, the minimum latecy of guest NMI handler could be speed up at ~3413x (from 20407603 to 5979 ns) and at ~786x in the average. Suggested-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-27 13:52:42 +03:00
if (pmc->current_config == eventsel && pmc_resume_counter(pmc))
return;
pmc_release_perf_event(pmc);
pmc->current_config = eventsel;
pmc_reprogram_counter(pmc, type, config,
!(eventsel & ARCH_PERFMON_EVENTSEL_USR),
!(eventsel & ARCH_PERFMON_EVENTSEL_OS),
eventsel & ARCH_PERFMON_EVENTSEL_INT);
}
EXPORT_SYMBOL_GPL(reprogram_gp_counter);
void reprogram_fixed_counter(struct kvm_pmc *pmc, u8 ctrl, int idx)
{
unsigned en_field = ctrl & 0x3;
bool pmi = ctrl & 0x8;
KVM: x86/vPMU: Reuse perf_event to avoid unnecessary pmc_reprogram_counter The perf_event_create_kernel_counter() in the pmc_reprogram_counter() is a heavyweight and high-frequency operation, especially when host disables the watchdog (maximum 21000000 ns) which leads to an unacceptable latency of the guest NMI handler. It limits the use of vPMUs in the guest. When a vPMC is fully enabled, the legacy reprogram_*_counter() would stop and release its existing perf_event (if any) every time EVEN in most cases almost the same requested perf_event will be created and configured again. For each vPMC, if the reuqested config ('u64 eventsel' for gp and 'u8 ctrl' for fixed) is the same as its current config AND a new sample period based on pmc->counter is accepted by host perf interface, the current event could be reused safely as a new created one does. Otherwise, do release the undesirable perf_event and reprogram a new one as usual. It's light-weight to call pmc_pause_counter (disable, read and reset event) and pmc_resume_counter (recalibrate period and re-enable event) as guest expects instead of release-and-create again on any condition. Compared to use the filterable event->attr or hw.config, a new 'u64 current_config' field is added to save the last original programed config for each vPMC. Based on this implementation, the number of calls to pmc_reprogram_counter is reduced by ~82.5% for a gp sampling event and ~99.9% for a fixed event. In the usage of multiplexing perf sampling mode, the average latency of the guest NMI handler is reduced from 104923 ns to 48393 ns (~2.16x speed up). If host disables watchdog, the minimum latecy of guest NMI handler could be speed up at ~3413x (from 20407603 to 5979 ns) and at ~786x in the average. Suggested-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-27 13:52:42 +03:00
pmc_pause_counter(pmc);
if (!en_field || !pmc_is_enabled(pmc))
return;
if (!check_pmu_event_filter(pmc))
return;
KVM: x86/vPMU: Reuse perf_event to avoid unnecessary pmc_reprogram_counter The perf_event_create_kernel_counter() in the pmc_reprogram_counter() is a heavyweight and high-frequency operation, especially when host disables the watchdog (maximum 21000000 ns) which leads to an unacceptable latency of the guest NMI handler. It limits the use of vPMUs in the guest. When a vPMC is fully enabled, the legacy reprogram_*_counter() would stop and release its existing perf_event (if any) every time EVEN in most cases almost the same requested perf_event will be created and configured again. For each vPMC, if the reuqested config ('u64 eventsel' for gp and 'u8 ctrl' for fixed) is the same as its current config AND a new sample period based on pmc->counter is accepted by host perf interface, the current event could be reused safely as a new created one does. Otherwise, do release the undesirable perf_event and reprogram a new one as usual. It's light-weight to call pmc_pause_counter (disable, read and reset event) and pmc_resume_counter (recalibrate period and re-enable event) as guest expects instead of release-and-create again on any condition. Compared to use the filterable event->attr or hw.config, a new 'u64 current_config' field is added to save the last original programed config for each vPMC. Based on this implementation, the number of calls to pmc_reprogram_counter is reduced by ~82.5% for a gp sampling event and ~99.9% for a fixed event. In the usage of multiplexing perf sampling mode, the average latency of the guest NMI handler is reduced from 104923 ns to 48393 ns (~2.16x speed up). If host disables watchdog, the minimum latecy of guest NMI handler could be speed up at ~3413x (from 20407603 to 5979 ns) and at ~786x in the average. Suggested-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-27 13:52:42 +03:00
if (pmc->current_config == (u64)ctrl && pmc_resume_counter(pmc))
return;
pmc_release_perf_event(pmc);
pmc->current_config = (u64)ctrl;
pmc_reprogram_counter(pmc, PERF_TYPE_HARDWARE,
static_call(kvm_x86_pmu_pmc_perf_hw_id)(pmc),
!(en_field & 0x2), /* exclude user */
!(en_field & 0x1), /* exclude kernel */
pmi);
}
EXPORT_SYMBOL_GPL(reprogram_fixed_counter);
void reprogram_counter(struct kvm_pmc *pmc)
{
if (pmc_is_gp(pmc))
reprogram_gp_counter(pmc, pmc->eventsel);
else {
int idx = pmc->idx - INTEL_PMC_IDX_FIXED;
u8 ctrl = fixed_ctrl_field(pmc_to_pmu(pmc)->fixed_ctr_ctrl, idx);
reprogram_fixed_counter(pmc, ctrl, idx);
}
}
EXPORT_SYMBOL_GPL(reprogram_counter);
void kvm_pmu_handle_event(struct kvm_vcpu *vcpu)
{
struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
int bit;
for_each_set_bit(bit, pmu->reprogram_pmi, X86_PMC_IDX_MAX) {
struct kvm_pmc *pmc = static_call(kvm_x86_pmu_pmc_idx_to_pmc)(pmu, bit);
if (unlikely(!pmc || !pmc->perf_event)) {
clear_bit(bit, pmu->reprogram_pmi);
continue;
}
reprogram_counter(pmc);
}
/*
* Unused perf_events are only released if the corresponding MSRs
* weren't accessed during the last vCPU time slice. kvm_arch_sched_in
* triggers KVM_REQ_PMU if cleanup is needed.
*/
if (unlikely(pmu->need_cleanup))
kvm_pmu_cleanup(vcpu);
}
/* check if idx is a valid index to access PMU */
bool kvm_pmu_is_valid_rdpmc_ecx(struct kvm_vcpu *vcpu, unsigned int idx)
{
return static_call(kvm_x86_pmu_is_valid_rdpmc_ecx)(vcpu, idx);
}
bool is_vmware_backdoor_pmc(u32 pmc_idx)
{
switch (pmc_idx) {
case VMWARE_BACKDOOR_PMC_HOST_TSC:
case VMWARE_BACKDOOR_PMC_REAL_TIME:
case VMWARE_BACKDOOR_PMC_APPARENT_TIME:
return true;
}
return false;
}
static int kvm_pmu_rdpmc_vmware(struct kvm_vcpu *vcpu, unsigned idx, u64 *data)
{
u64 ctr_val;
switch (idx) {
case VMWARE_BACKDOOR_PMC_HOST_TSC:
ctr_val = rdtsc();
break;
case VMWARE_BACKDOOR_PMC_REAL_TIME:
ctr_val = ktime_get_boottime_ns();
break;
case VMWARE_BACKDOOR_PMC_APPARENT_TIME:
ctr_val = ktime_get_boottime_ns() +
vcpu->kvm->arch.kvmclock_offset;
break;
default:
return 1;
}
*data = ctr_val;
return 0;
}
int kvm_pmu_rdpmc(struct kvm_vcpu *vcpu, unsigned idx, u64 *data)
{
bool fast_mode = idx & (1u << 31);
struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
struct kvm_pmc *pmc;
u64 mask = fast_mode ? ~0u : ~0ull;
if (!pmu->version)
return 1;
if (is_vmware_backdoor_pmc(idx))
return kvm_pmu_rdpmc_vmware(vcpu, idx, data);
pmc = static_call(kvm_x86_pmu_rdpmc_ecx_to_pmc)(vcpu, idx, &mask);
if (!pmc)
return 1;
if (!(kvm_read_cr4(vcpu) & X86_CR4_PCE) &&
(static_call(kvm_x86_get_cpl)(vcpu) != 0) &&
(kvm_read_cr0(vcpu) & X86_CR0_PE))
return 1;
*data = pmc_read_counter(pmc) & mask;
return 0;
}
void kvm_pmu_deliver_pmi(struct kvm_vcpu *vcpu)
{
if (lapic_in_kernel(vcpu)) {
static_call_cond(kvm_x86_pmu_deliver_pmi)(vcpu);
kvm_apic_local_deliver(vcpu->arch.apic, APIC_LVTPC);
}
}
bool kvm_pmu_is_valid_msr(struct kvm_vcpu *vcpu, u32 msr, bool host_initiated)
{
return static_call(kvm_x86_pmu_msr_idx_to_pmc)(vcpu, msr) ||
static_call(kvm_x86_pmu_is_valid_msr)(vcpu, msr, host_initiated);
}
static void kvm_pmu_mark_pmc_in_use(struct kvm_vcpu *vcpu, u32 msr)
{
struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
struct kvm_pmc *pmc = static_call(kvm_x86_pmu_msr_idx_to_pmc)(vcpu, msr);
if (pmc)
__set_bit(pmc->idx, pmu->pmc_in_use);
}
int kvm_pmu_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
{
return static_call(kvm_x86_pmu_get_msr)(vcpu, msr_info);
}
int kvm_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
{
kvm_pmu_mark_pmc_in_use(vcpu, msr_info->index);
return static_call(kvm_x86_pmu_set_msr)(vcpu, msr_info);
}
/* refresh PMU settings. This function generally is called when underlying
* settings are changed (such as changes of PMU CPUID by guest VMs), which
* should rarely happen.
*/
void kvm_pmu_refresh(struct kvm_vcpu *vcpu)
{
static_call(kvm_x86_pmu_refresh)(vcpu);
}
void kvm_pmu_reset(struct kvm_vcpu *vcpu)
{
struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
irq_work_sync(&pmu->irq_work);
static_call(kvm_x86_pmu_reset)(vcpu);
}
void kvm_pmu_init(struct kvm_vcpu *vcpu)
{
struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
memset(pmu, 0, sizeof(*pmu));
static_call(kvm_x86_pmu_init)(vcpu);
init_irq_work(&pmu->irq_work, kvm_pmi_trigger_fn);
pmu->event_count = 0;
pmu->need_cleanup = false;
kvm_pmu_refresh(vcpu);
}
/* Release perf_events for vPMCs that have been unused for a full time slice. */
void kvm_pmu_cleanup(struct kvm_vcpu *vcpu)
{
struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
struct kvm_pmc *pmc = NULL;
DECLARE_BITMAP(bitmask, X86_PMC_IDX_MAX);
int i;
pmu->need_cleanup = false;
bitmap_andnot(bitmask, pmu->all_valid_pmc_idx,
pmu->pmc_in_use, X86_PMC_IDX_MAX);
for_each_set_bit(i, bitmask, X86_PMC_IDX_MAX) {
pmc = static_call(kvm_x86_pmu_pmc_idx_to_pmc)(pmu, i);
if (pmc && pmc->perf_event && !pmc_speculative_in_use(pmc))
pmc_stop_counter(pmc);
}
static_call_cond(kvm_x86_pmu_cleanup)(vcpu);
bitmap_zero(pmu->pmc_in_use, X86_PMC_IDX_MAX);
}
void kvm_pmu_destroy(struct kvm_vcpu *vcpu)
{
kvm_pmu_reset(vcpu);
}
static void kvm_pmu_incr_counter(struct kvm_pmc *pmc)
{
u64 prev_count;
prev_count = pmc->counter;
pmc->counter = (pmc->counter + 1) & pmc_bitmask(pmc);
reprogram_counter(pmc);
if (pmc->counter < prev_count)
__kvm_perf_overflow(pmc, false);
}
static inline bool eventsel_match_perf_hw_id(struct kvm_pmc *pmc,
unsigned int perf_hw_id)
{
u64 old_eventsel = pmc->eventsel;
unsigned int config;
pmc->eventsel &= (ARCH_PERFMON_EVENTSEL_EVENT | ARCH_PERFMON_EVENTSEL_UMASK);
config = static_call(kvm_x86_pmu_pmc_perf_hw_id)(pmc);
pmc->eventsel = old_eventsel;
return config == perf_hw_id;
}
static inline bool cpl_is_matched(struct kvm_pmc *pmc)
{
bool select_os, select_user;
u64 config = pmc->current_config;
if (pmc_is_gp(pmc)) {
select_os = config & ARCH_PERFMON_EVENTSEL_OS;
select_user = config & ARCH_PERFMON_EVENTSEL_USR;
} else {
select_os = config & 0x1;
select_user = config & 0x2;
}
return (static_call(kvm_x86_get_cpl)(pmc->vcpu) == 0) ? select_os : select_user;
}
void kvm_pmu_trigger_event(struct kvm_vcpu *vcpu, u64 perf_hw_id)
{
struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
struct kvm_pmc *pmc;
int i;
for_each_set_bit(i, pmu->all_valid_pmc_idx, X86_PMC_IDX_MAX) {
pmc = static_call(kvm_x86_pmu_pmc_idx_to_pmc)(pmu, i);
if (!pmc || !pmc_is_enabled(pmc) || !pmc_speculative_in_use(pmc))
continue;
/* Ignore checks for edge detect, pin control, invert and CMASK bits */
if (eventsel_match_perf_hw_id(pmc, perf_hw_id) && cpl_is_matched(pmc))
kvm_pmu_incr_counter(pmc);
}
}
EXPORT_SYMBOL_GPL(kvm_pmu_trigger_event);
int kvm_vm_ioctl_set_pmu_event_filter(struct kvm *kvm, void __user *argp)
{
struct kvm_pmu_event_filter tmp, *filter;
size_t size;
int r;
if (copy_from_user(&tmp, argp, sizeof(tmp)))
return -EFAULT;
if (tmp.action != KVM_PMU_EVENT_ALLOW &&
tmp.action != KVM_PMU_EVENT_DENY)
return -EINVAL;
if (tmp.flags != 0)
return -EINVAL;
if (tmp.nevents > KVM_PMU_EVENT_FILTER_MAX_EVENTS)
return -E2BIG;
size = struct_size(filter, events, tmp.nevents);
filter = kmalloc(size, GFP_KERNEL_ACCOUNT);
if (!filter)
return -ENOMEM;
r = -EFAULT;
if (copy_from_user(filter, argp, size))
goto cleanup;
/* Ensure nevents can't be changed between the user copies. */
*filter = tmp;
/*
* Sort the in-kernel list so that we can search it with bsearch.
*/
sort(&filter->events, filter->nevents, sizeof(__u64), cmp_u64, NULL);
mutex_lock(&kvm->lock);
filter = rcu_replace_pointer(kvm->arch.pmu_event_filter, filter,
mutex_is_locked(&kvm->lock));
mutex_unlock(&kvm->lock);
synchronize_srcu_expedited(&kvm->srcu);
r = 0;
cleanup:
kfree(filter);
return r;
}