iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/powerpc/lib/copypage_64.S

108 lines
2.0 KiB
ArmAsm
Raw Normal View History

powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
/*
powerpc: New copy_4K_page() This new copy_4K_page() function was originally tuned for the best performance on the Cell processor, but after testing on more 64bit powerpc chips it was found that with a small modification it either matched the performance offered by the current mainline version or bettered it by a small amount. It was found that on a Cell-based QS22 blade the amount of system time measured when compiling a 2.6.26 pseries_defconfig decreased by 4%. Using the same test, a 4-way 970MP machine saw a decrease of 2% in system time. No noticeable change was seen on Power4, Power5 or Power6. The 4096 byte page is copied in thirty-two 128 byte strides. An initial setup loop executes dcbt instructions for the whole source page and dcbz instructions for the whole destination page. To do this, the cache line size is retrieved from ppc64_caches. A new CPU feature bit, CPU_FTR_CP_USE_DCBTZ, (introduced in the previous patch) is used to make the modification to this new copy routine - on Power4, 970 and Cell the feature bit is set so the setup loop is executed, but on all other 64bit chips the setup loop is nop'ed out. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-22 14:39:00 +10:00
* Copyright (C) 2008 Mark Nelson, IBM Corp.
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <asm/processor.h>
#include <asm/ppc_asm.h>
powerpc: New copy_4K_page() This new copy_4K_page() function was originally tuned for the best performance on the Cell processor, but after testing on more 64bit powerpc chips it was found that with a small modification it either matched the performance offered by the current mainline version or bettered it by a small amount. It was found that on a Cell-based QS22 blade the amount of system time measured when compiling a 2.6.26 pseries_defconfig decreased by 4%. Using the same test, a 4-way 970MP machine saw a decrease of 2% in system time. No noticeable change was seen on Power4, Power5 or Power6. The 4096 byte page is copied in thirty-two 128 byte strides. An initial setup loop executes dcbt instructions for the whole source page and dcbz instructions for the whole destination page. To do this, the cache line size is retrieved from ppc64_caches. A new CPU feature bit, CPU_FTR_CP_USE_DCBTZ, (introduced in the previous patch) is used to make the modification to this new copy routine - on Power4, 970 and Cell the feature bit is set so the setup loop is executed, but on all other 64bit chips the setup loop is nop'ed out. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-22 14:39:00 +10:00
#include <asm/asm-offsets.h>
.section ".toc","aw"
PPC64_CACHES:
.tc ppc64_caches[TC],ppc64_caches
.section ".text"
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 11:06:55 +11:00
_GLOBAL(copy_4K_page)
powerpc: New copy_4K_page() This new copy_4K_page() function was originally tuned for the best performance on the Cell processor, but after testing on more 64bit powerpc chips it was found that with a small modification it either matched the performance offered by the current mainline version or bettered it by a small amount. It was found that on a Cell-based QS22 blade the amount of system time measured when compiling a 2.6.26 pseries_defconfig decreased by 4%. Using the same test, a 4-way 970MP machine saw a decrease of 2% in system time. No noticeable change was seen on Power4, Power5 or Power6. The 4096 byte page is copied in thirty-two 128 byte strides. An initial setup loop executes dcbt instructions for the whole source page and dcbz instructions for the whole destination page. To do this, the cache line size is retrieved from ppc64_caches. A new CPU feature bit, CPU_FTR_CP_USE_DCBTZ, (introduced in the previous patch) is used to make the modification to this new copy routine - on Power4, 970 and Cell the feature bit is set so the setup loop is executed, but on all other 64bit chips the setup loop is nop'ed out. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-22 14:39:00 +10:00
li r5,4096 /* 4K page size */
BEGIN_FTR_SECTION
ld r10,PPC64_CACHES@toc(r2)
lwz r11,DCACHEL1LOGLINESIZE(r10) /* log2 of cache line size */
lwz r12,DCACHEL1LINESIZE(r10) /* get cache line size */
li r9,0
srd r8,r5,r11
mtctr r8
setup:
dcbt r9,r4
dcbz r9,r3
add r9,r9,r12
bdnz setup
END_FTR_SECTION_IFSET(CPU_FTR_CP_USE_DCBTZ)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
addi r3,r3,-8
powerpc: New copy_4K_page() This new copy_4K_page() function was originally tuned for the best performance on the Cell processor, but after testing on more 64bit powerpc chips it was found that with a small modification it either matched the performance offered by the current mainline version or bettered it by a small amount. It was found that on a Cell-based QS22 blade the amount of system time measured when compiling a 2.6.26 pseries_defconfig decreased by 4%. Using the same test, a 4-way 970MP machine saw a decrease of 2% in system time. No noticeable change was seen on Power4, Power5 or Power6. The 4096 byte page is copied in thirty-two 128 byte strides. An initial setup loop executes dcbt instructions for the whole source page and dcbz instructions for the whole destination page. To do this, the cache line size is retrieved from ppc64_caches. A new CPU feature bit, CPU_FTR_CP_USE_DCBTZ, (introduced in the previous patch) is used to make the modification to this new copy routine - on Power4, 970 and Cell the feature bit is set so the setup loop is executed, but on all other 64bit chips the setup loop is nop'ed out. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-22 14:39:00 +10:00
srdi r8,r5,7 /* page is copied in 128 byte strides */
addi r8,r8,-1 /* one stride copied outside loop */
mtctr r8
ld r5,0(r4)
ld r6,8(r4)
ld r7,16(r4)
ldu r8,24(r4)
1: std r5,8(r3)
ld r9,8(r4)
std r6,16(r3)
ld r10,16(r4)
std r7,24(r3)
ld r11,24(r4)
std r8,32(r3)
ld r12,32(r4)
std r9,40(r3)
ld r5,40(r4)
std r10,48(r3)
ld r6,48(r4)
std r11,56(r3)
ld r7,56(r4)
std r12,64(r3)
ld r8,64(r4)
std r5,72(r3)
ld r9,72(r4)
std r6,80(r3)
ld r10,80(r4)
std r7,88(r3)
ld r11,88(r4)
std r8,96(r3)
ld r12,96(r4)
std r9,104(r3)
ld r5,104(r4)
std r10,112(r3)
ld r6,112(r4)
std r11,120(r3)
ld r7,120(r4)
stdu r12,128(r3)
ldu r8,128(r4)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
bdnz 1b
powerpc: New copy_4K_page() This new copy_4K_page() function was originally tuned for the best performance on the Cell processor, but after testing on more 64bit powerpc chips it was found that with a small modification it either matched the performance offered by the current mainline version or bettered it by a small amount. It was found that on a Cell-based QS22 blade the amount of system time measured when compiling a 2.6.26 pseries_defconfig decreased by 4%. Using the same test, a 4-way 970MP machine saw a decrease of 2% in system time. No noticeable change was seen on Power4, Power5 or Power6. The 4096 byte page is copied in thirty-two 128 byte strides. An initial setup loop executes dcbt instructions for the whole source page and dcbz instructions for the whole destination page. To do this, the cache line size is retrieved from ppc64_caches. A new CPU feature bit, CPU_FTR_CP_USE_DCBTZ, (introduced in the previous patch) is used to make the modification to this new copy routine - on Power4, 970 and Cell the feature bit is set so the setup loop is executed, but on all other 64bit chips the setup loop is nop'ed out. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-22 14:39:00 +10:00
std r5,8(r3)
ld r9,8(r4)
std r6,16(r3)
ld r10,16(r4)
std r7,24(r3)
ld r11,24(r4)
std r8,32(r3)
ld r12,32(r4)
std r9,40(r3)
ld r5,40(r4)
std r10,48(r3)
ld r6,48(r4)
std r11,56(r3)
ld r7,56(r4)
std r12,64(r3)
ld r8,64(r4)
std r5,72(r3)
ld r9,72(r4)
std r6,80(r3)
ld r10,80(r4)
std r7,88(r3)
ld r11,88(r4)
std r8,96(r3)
ld r12,96(r4)
std r9,104(r3)
std r10,112(r3)
std r11,120(r3)
std r12,128(r3)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
blr
Reference in New Issue Copy Permalink