2008-12-04 22:12:29 +03:00
/*
* Performance counter core code
*
2009-04-29 16:52:50 +04:00
* Copyright ( C ) 2008 Thomas Gleixner < tglx @ linutronix . de >
* Copyright ( C ) 2008 - 2009 Red Hat , Inc . , Ingo Molnar
* Copyright ( C ) 2008 - 2009 Red Hat , Inc . , Peter Zijlstra < pzijlstr @ redhat . com >
2009-04-30 03:48:16 +04:00
* Copyright <EFBFBD> 2009 Paul Mackerras , IBM Corp . < paulus @ au1 . ibm . com >
2009-03-23 20:22:10 +03:00
*
* For licensing details see kernel - base / COPYING
2008-12-04 22:12:29 +03:00
*/
# include <linux/fs.h>
2009-03-25 14:30:22 +03:00
# include <linux/mm.h>
2008-12-04 22:12:29 +03:00
# include <linux/cpu.h>
# include <linux/smp.h>
2008-12-11 10:38:42 +03:00
# include <linux/file.h>
2008-12-04 22:12:29 +03:00
# include <linux/poll.h>
# include <linux/sysfs.h>
# include <linux/ptrace.h>
# include <linux/percpu.h>
2009-03-25 14:30:22 +03:00
# include <linux/vmstat.h>
# include <linux/hardirq.h>
# include <linux/rculist.h>
2008-12-04 22:12:29 +03:00
# include <linux/uaccess.h>
# include <linux/syscalls.h>
# include <linux/anon_inodes.h>
2008-12-17 16:10:57 +03:00
# include <linux/kernel_stat.h>
2008-12-04 22:12:29 +03:00
# include <linux/perf_counter.h>
2009-03-30 21:07:05 +04:00
# include <linux/dcache.h>
2008-12-04 22:12:29 +03:00
2009-03-14 16:29:25 +03:00
# include <asm/irq_regs.h>
2008-12-04 22:12:29 +03:00
/*
* Each CPU has a list of per CPU counters :
*/
DEFINE_PER_CPU ( struct perf_cpu_context , perf_cpu_context ) ;
2008-12-14 22:21:00 +03:00
int perf_max_counters __read_mostly = 1 ;
2008-12-04 22:12:29 +03:00
static int perf_reserved_percpu __read_mostly ;
static int perf_overcommit __read_mostly = 1 ;
2009-05-08 20:52:21 +04:00
static atomic_t nr_counters __read_mostly ;
2009-04-09 12:53:44 +04:00
static atomic_t nr_mmap_tracking __read_mostly ;
static atomic_t nr_munmap_tracking __read_mostly ;
static atomic_t nr_comm_tracking __read_mostly ;
2009-04-09 12:53:45 +04:00
int sysctl_perf_counter_priv __read_mostly ; /* do we need to be privileged */
2009-05-15 17:19:27 +04:00
int sysctl_perf_counter_mlock __read_mostly = 512 ; /* 'free' kb per user */
2009-04-09 12:53:45 +04:00
2008-12-04 22:12:29 +03:00
/*
2009-05-04 21:23:18 +04:00
* Lock for ( sysadmin - configurable ) counter reservations :
2008-12-04 22:12:29 +03:00
*/
2009-05-04 21:23:18 +04:00
static DEFINE_SPINLOCK ( perf_resource_lock ) ;
2008-12-04 22:12:29 +03:00
/*
* Architecture provided APIs - weak aliases :
*/
2009-04-29 14:47:03 +04:00
extern __weak const struct pmu * hw_perf_counter_init ( struct perf_counter * counter )
2008-12-04 22:12:29 +03:00
{
2009-01-09 08:19:25 +03:00
return NULL ;
2008-12-04 22:12:29 +03:00
}
2009-05-13 18:21:38 +04:00
void __weak hw_perf_disable ( void ) { barrier ( ) ; }
void __weak hw_perf_enable ( void ) { barrier ( ) ; }
2009-01-14 05:44:19 +03:00
void __weak hw_perf_counter_setup ( int cpu ) { barrier ( ) ; }
2009-01-09 08:43:42 +03:00
int __weak hw_perf_group_sched_in ( struct perf_counter * group_leader ,
struct perf_cpu_context * cpuctx ,
struct perf_counter_context * ctx , int cpu )
{
return 0 ;
}
2008-12-04 22:12:29 +03:00
2009-01-09 09:24:34 +03:00
void __weak perf_counter_print_debug ( void ) { }
2009-05-13 18:21:38 +04:00
static DEFINE_PER_CPU ( int , disable_count ) ;
void __perf_disable ( void )
{
__get_cpu_var ( disable_count ) + + ;
}
bool __perf_enable ( void )
{
return ! - - __get_cpu_var ( disable_count ) ;
}
void perf_disable ( void )
{
__perf_disable ( ) ;
hw_perf_disable ( ) ;
}
void perf_enable ( void )
{
if ( __perf_enable ( ) )
hw_perf_enable ( ) ;
}
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
static void get_ctx ( struct perf_counter_context * ctx )
{
atomic_inc ( & ctx - > refcount ) ;
}
static void put_ctx ( struct perf_counter_context * ctx )
{
if ( atomic_dec_and_test ( & ctx - > refcount ) )
kfree ( ctx ) ;
}
2008-12-11 10:38:42 +03:00
static void
list_add_counter ( struct perf_counter * counter , struct perf_counter_context * ctx )
{
struct perf_counter * group_leader = counter - > group_leader ;
/*
* Depending on whether it is a standalone or sibling counter ,
* add it straight to the context ' s counter list , or to the group
* leader ' s sibling list :
*/
2009-05-08 20:52:22 +04:00
if ( group_leader = = counter )
2008-12-11 10:38:42 +03:00
list_add_tail ( & counter - > list_entry , & ctx - > counter_list ) ;
2009-03-25 14:30:23 +03:00
else {
2008-12-11 10:38:42 +03:00
list_add_tail ( & counter - > list_entry , & group_leader - > sibling_list ) ;
2009-03-25 14:30:23 +03:00
group_leader - > nr_siblings + + ;
}
2009-03-13 14:21:36 +03:00
list_add_rcu ( & counter - > event_entry , & ctx - > event_list ) ;
2009-05-15 22:45:59 +04:00
ctx - > nr_counters + + ;
2008-12-11 10:38:42 +03:00
}
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
/*
* Remove a counter from the lists for its context .
* Must be called with counter - > mutex and ctx - > mutex held .
*/
2008-12-11 10:38:42 +03:00
static void
list_del_counter ( struct perf_counter * counter , struct perf_counter_context * ctx )
{
struct perf_counter * sibling , * tmp ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
if ( list_empty ( & counter - > list_entry ) )
return ;
2009-05-15 22:45:59 +04:00
ctx - > nr_counters - - ;
2008-12-11 10:38:42 +03:00
list_del_init ( & counter - > list_entry ) ;
2009-03-13 14:21:36 +03:00
list_del_rcu ( & counter - > event_entry ) ;
2008-12-11 10:38:42 +03:00
2009-03-25 14:30:23 +03:00
if ( counter - > group_leader ! = counter )
counter - > group_leader - > nr_siblings - - ;
2008-12-11 10:38:42 +03:00
/*
* If this was a group counter with sibling counters then
* upgrade the siblings to singleton counters by adding them
* to the context list directly :
*/
list_for_each_entry_safe ( sibling , tmp ,
& counter - > sibling_list , list_entry ) {
2009-03-13 14:21:29 +03:00
list_move_tail ( & sibling - > list_entry , & ctx - > counter_list ) ;
2008-12-11 10:38:42 +03:00
sibling - > group_leader = sibling ;
}
}
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
static void
counter_sched_out ( struct perf_counter * counter ,
struct perf_cpu_context * cpuctx ,
struct perf_counter_context * ctx )
{
if ( counter - > state ! = PERF_COUNTER_STATE_ACTIVE )
return ;
counter - > state = PERF_COUNTER_STATE_INACTIVE ;
2009-04-06 13:45:10 +04:00
counter - > tstamp_stopped = ctx - > time ;
2009-04-29 14:47:03 +04:00
counter - > pmu - > disable ( counter ) ;
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
counter - > oncpu = - 1 ;
if ( ! is_software_counter ( counter ) )
cpuctx - > active_oncpu - - ;
ctx - > nr_active - - ;
if ( counter - > hw_event . exclusive | | ! cpuctx - > active_oncpu )
cpuctx - > exclusive = 0 ;
}
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
static void
group_sched_out ( struct perf_counter * group_counter ,
struct perf_cpu_context * cpuctx ,
struct perf_counter_context * ctx )
{
struct perf_counter * counter ;
if ( group_counter - > state ! = PERF_COUNTER_STATE_ACTIVE )
return ;
counter_sched_out ( group_counter , cpuctx , ctx ) ;
/*
* Schedule out siblings ( if any ) :
*/
list_for_each_entry ( counter , & group_counter - > sibling_list , list_entry )
counter_sched_out ( counter , cpuctx , ctx ) ;
if ( group_counter - > hw_event . exclusive )
cpuctx - > exclusive = 0 ;
}
2008-12-04 22:12:29 +03:00
/*
* Cross CPU call to remove a performance counter
*
* We disable the counter on the hardware level first . After that we
* remove it from the context list .
*/
2008-12-11 10:38:42 +03:00
static void __perf_counter_remove_from_context ( void * info )
2008-12-04 22:12:29 +03:00
{
struct perf_cpu_context * cpuctx = & __get_cpu_var ( perf_cpu_context ) ;
struct perf_counter * counter = info ;
struct perf_counter_context * ctx = counter - > ctx ;
2008-12-12 15:49:45 +03:00
unsigned long flags ;
2008-12-04 22:12:29 +03:00
/*
* If this is a task context , we need to check whether it is
* the current task context of this cpu . If not it has been
* scheduled out before the smp call arrived .
*/
if ( ctx - > task & & cpuctx - > task_ctx ! = ctx )
return ;
2009-04-06 13:45:12 +04:00
spin_lock_irqsave ( & ctx - > lock , flags ) ;
2009-05-20 22:13:28 +04:00
/*
* Protect the list operation against NMI by disabling the
* counters on a global level .
*/
perf_disable ( ) ;
2008-12-04 22:12:29 +03:00
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
counter_sched_out ( counter , cpuctx , ctx ) ;
2008-12-11 10:38:42 +03:00
list_del_counter ( counter , ctx ) ;
2008-12-04 22:12:29 +03:00
if ( ! ctx - > task ) {
/*
* Allow more per task counters with respect to the
* reservation :
*/
cpuctx - > max_pertask =
min ( perf_max_counters - ctx - > nr_counters ,
perf_max_counters - perf_reserved_percpu ) ;
}
2009-05-20 22:13:28 +04:00
perf_enable ( ) ;
2009-04-06 13:45:12 +04:00
spin_unlock_irqrestore ( & ctx - > lock , flags ) ;
2008-12-04 22:12:29 +03:00
}
/*
* Remove the counter from a task ' s ( or a CPU ' s ) list of counters .
*
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
* Must be called with counter - > mutex and ctx - > mutex held .
2008-12-04 22:12:29 +03:00
*
* CPU counters are removed with a smp call . For task counters we only
* call when the task is on a CPU .
*/
2008-12-11 10:38:42 +03:00
static void perf_counter_remove_from_context ( struct perf_counter * counter )
2008-12-04 22:12:29 +03:00
{
struct perf_counter_context * ctx = counter - > ctx ;
struct task_struct * task = ctx - > task ;
if ( ! task ) {
/*
* Per cpu counters are removed via an smp call and
* the removal is always sucessful .
*/
smp_call_function_single ( counter - > cpu ,
2008-12-11 10:38:42 +03:00
__perf_counter_remove_from_context ,
2008-12-04 22:12:29 +03:00
counter , 1 ) ;
return ;
}
retry :
2008-12-11 10:38:42 +03:00
task_oncpu_function_call ( task , __perf_counter_remove_from_context ,
2008-12-04 22:12:29 +03:00
counter ) ;
spin_lock_irq ( & ctx - > lock ) ;
/*
* If the context is active we need to retry the smp call .
*/
2008-12-11 10:38:42 +03:00
if ( ctx - > nr_active & & ! list_empty ( & counter - > list_entry ) ) {
2008-12-04 22:12:29 +03:00
spin_unlock_irq ( & ctx - > lock ) ;
goto retry ;
}
/*
* The lock prevents that this context is scheduled in so we
2008-12-11 10:38:42 +03:00
* can remove the counter safely , if the call above did not
2008-12-04 22:12:29 +03:00
* succeed .
*/
2008-12-11 10:38:42 +03:00
if ( ! list_empty ( & counter - > list_entry ) ) {
list_del_counter ( counter , ctx ) ;
2008-12-04 22:12:29 +03:00
}
spin_unlock_irq ( & ctx - > lock ) ;
}
2009-04-06 13:45:10 +04:00
static inline u64 perf_clock ( void )
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
{
2009-04-06 13:45:10 +04:00
return cpu_clock ( smp_processor_id ( ) ) ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
}
/*
* Update the record of the current time in a context .
*/
2009-04-06 13:45:10 +04:00
static void update_context_time ( struct perf_counter_context * ctx )
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
{
2009-04-06 13:45:10 +04:00
u64 now = perf_clock ( ) ;
ctx - > time + = now - ctx - > timestamp ;
ctx - > timestamp = now ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
}
/*
* Update the total_time_enabled and total_time_running fields for a counter .
*/
static void update_counter_times ( struct perf_counter * counter )
{
struct perf_counter_context * ctx = counter - > ctx ;
u64 run_end ;
2009-04-06 13:45:10 +04:00
if ( counter - > state < PERF_COUNTER_STATE_INACTIVE )
return ;
counter - > total_time_enabled = ctx - > time - counter - > tstamp_enabled ;
if ( counter - > state = = PERF_COUNTER_STATE_INACTIVE )
run_end = counter - > tstamp_stopped ;
else
run_end = ctx - > time ;
counter - > total_time_running = run_end - counter - > tstamp_running ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
}
/*
* Update total_time_enabled and total_time_running for all counters in a group .
*/
static void update_group_times ( struct perf_counter * leader )
{
struct perf_counter * counter ;
update_counter_times ( leader ) ;
list_for_each_entry ( counter , & leader - > sibling_list , list_entry )
update_counter_times ( counter ) ;
}
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
/*
* Cross CPU call to disable a performance counter
*/
static void __perf_counter_disable ( void * info )
{
struct perf_counter * counter = info ;
struct perf_cpu_context * cpuctx = & __get_cpu_var ( perf_cpu_context ) ;
struct perf_counter_context * ctx = counter - > ctx ;
unsigned long flags ;
/*
* If this is a per - task counter , need to check whether this
* counter ' s task is the current task on this cpu .
*/
if ( ctx - > task & & cpuctx - > task_ctx ! = ctx )
return ;
2009-04-06 13:45:12 +04:00
spin_lock_irqsave ( & ctx - > lock , flags ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
/*
* If the counter is on , turn it off .
* If it is in error state , leave it in error state .
*/
if ( counter - > state > = PERF_COUNTER_STATE_INACTIVE ) {
2009-04-06 13:45:10 +04:00
update_context_time ( ctx ) ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
update_counter_times ( counter ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
if ( counter = = counter - > group_leader )
group_sched_out ( counter , cpuctx , ctx ) ;
else
counter_sched_out ( counter , cpuctx , ctx ) ;
counter - > state = PERF_COUNTER_STATE_OFF ;
}
2009-04-06 13:45:12 +04:00
spin_unlock_irqrestore ( & ctx - > lock , flags ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
}
/*
* Disable a counter .
*/
static void perf_counter_disable ( struct perf_counter * counter )
{
struct perf_counter_context * ctx = counter - > ctx ;
struct task_struct * task = ctx - > task ;
if ( ! task ) {
/*
* Disable the counter on the cpu that it ' s on
*/
smp_call_function_single ( counter - > cpu , __perf_counter_disable ,
counter , 1 ) ;
return ;
}
retry :
task_oncpu_function_call ( task , __perf_counter_disable , counter ) ;
spin_lock_irq ( & ctx - > lock ) ;
/*
* If the counter is still active , we need to retry the cross - call .
*/
if ( counter - > state = = PERF_COUNTER_STATE_ACTIVE ) {
spin_unlock_irq ( & ctx - > lock ) ;
goto retry ;
}
/*
* Since we have the lock this context can ' t be scheduled
* in , so we can change the state safely .
*/
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
if ( counter - > state = = PERF_COUNTER_STATE_INACTIVE ) {
update_counter_times ( counter ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
counter - > state = PERF_COUNTER_STATE_OFF ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
}
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
spin_unlock_irq ( & ctx - > lock ) ;
}
2008-12-21 16:43:25 +03:00
static int
counter_sched_in ( struct perf_counter * counter ,
struct perf_cpu_context * cpuctx ,
struct perf_counter_context * ctx ,
int cpu )
{
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
if ( counter - > state < = PERF_COUNTER_STATE_OFF )
2008-12-21 16:43:25 +03:00
return 0 ;
counter - > state = PERF_COUNTER_STATE_ACTIVE ;
counter - > oncpu = cpu ; /* TODO: put 'cpu' into cpuctx->cpu */
/*
* The new state must be visible before we turn it on in the hardware :
*/
smp_wmb ( ) ;
2009-04-29 14:47:03 +04:00
if ( counter - > pmu - > enable ( counter ) ) {
2008-12-21 16:43:25 +03:00
counter - > state = PERF_COUNTER_STATE_INACTIVE ;
counter - > oncpu = - 1 ;
return - EAGAIN ;
}
2009-04-06 13:45:10 +04:00
counter - > tstamp_running + = ctx - > time - counter - > tstamp_stopped ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
if ( ! is_software_counter ( counter ) )
cpuctx - > active_oncpu + + ;
2008-12-21 16:43:25 +03:00
ctx - > nr_active + + ;
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
if ( counter - > hw_event . exclusive )
cpuctx - > exclusive = 1 ;
2008-12-21 16:43:25 +03:00
return 0 ;
}
2009-05-11 06:08:02 +04:00
static int
group_sched_in ( struct perf_counter * group_counter ,
struct perf_cpu_context * cpuctx ,
struct perf_counter_context * ctx ,
int cpu )
{
struct perf_counter * counter , * partial_group ;
int ret ;
if ( group_counter - > state = = PERF_COUNTER_STATE_OFF )
return 0 ;
ret = hw_perf_group_sched_in ( group_counter , cpuctx , ctx , cpu ) ;
if ( ret )
return ret < 0 ? ret : 0 ;
group_counter - > prev_state = group_counter - > state ;
if ( counter_sched_in ( group_counter , cpuctx , ctx , cpu ) )
return - EAGAIN ;
/*
* Schedule in siblings as one group ( if any ) :
*/
list_for_each_entry ( counter , & group_counter - > sibling_list , list_entry ) {
counter - > prev_state = counter - > state ;
if ( counter_sched_in ( counter , cpuctx , ctx , cpu ) ) {
partial_group = counter ;
goto group_error ;
}
}
return 0 ;
group_error :
/*
* Groups can be scheduled in as one unit only , so undo any
* partial group before returning :
*/
list_for_each_entry ( counter , & group_counter - > sibling_list , list_entry ) {
if ( counter = = partial_group )
break ;
counter_sched_out ( counter , cpuctx , ctx ) ;
}
counter_sched_out ( group_counter , cpuctx , ctx ) ;
return - EAGAIN ;
}
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
/*
* Return 1 for a group consisting entirely of software counters ,
* 0 if the group contains any hardware counters .
*/
static int is_software_only_group ( struct perf_counter * leader )
{
struct perf_counter * counter ;
if ( ! is_software_counter ( leader ) )
return 0 ;
2009-03-25 14:30:23 +03:00
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
list_for_each_entry ( counter , & leader - > sibling_list , list_entry )
if ( ! is_software_counter ( counter ) )
return 0 ;
2009-03-25 14:30:23 +03:00
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
return 1 ;
}
/*
* Work out whether we can put this counter group on the CPU now .
*/
static int group_can_go_on ( struct perf_counter * counter ,
struct perf_cpu_context * cpuctx ,
int can_add_hw )
{
/*
* Groups consisting entirely of software counters can always go on .
*/
if ( is_software_only_group ( counter ) )
return 1 ;
/*
* If an exclusive group is already on , no other hardware
* counters can go on .
*/
if ( cpuctx - > exclusive )
return 0 ;
/*
* If this group is exclusive and there are already
* counters on the CPU , it can ' t go on .
*/
if ( counter - > hw_event . exclusive & & cpuctx - > active_oncpu )
return 0 ;
/*
* Otherwise , try to add it if all previous groups were able
* to go on .
*/
return can_add_hw ;
}
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
static void add_counter_to_ctx ( struct perf_counter * counter ,
struct perf_counter_context * ctx )
{
list_add_counter ( counter , ctx ) ;
counter - > prev_state = PERF_COUNTER_STATE_OFF ;
2009-04-06 13:45:10 +04:00
counter - > tstamp_enabled = ctx - > time ;
counter - > tstamp_running = ctx - > time ;
counter - > tstamp_stopped = ctx - > time ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
}
2008-12-04 22:12:29 +03:00
/*
2008-12-21 16:43:25 +03:00
* Cross CPU call to install and enable a performance counter
2008-12-04 22:12:29 +03:00
*/
static void __perf_install_in_context ( void * info )
{
struct perf_cpu_context * cpuctx = & __get_cpu_var ( perf_cpu_context ) ;
struct perf_counter * counter = info ;
struct perf_counter_context * ctx = counter - > ctx ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
struct perf_counter * leader = counter - > group_leader ;
2008-12-04 22:12:29 +03:00
int cpu = smp_processor_id ( ) ;
2008-12-12 15:49:45 +03:00
unsigned long flags ;
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
int err ;
2008-12-04 22:12:29 +03:00
/*
* If this is a task context , we need to check whether it is
* the current task context of this cpu . If not it has been
* scheduled out before the smp call arrived .
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
* Or possibly this is the right context but it isn ' t
* on this cpu because it had no counters .
2008-12-04 22:12:29 +03:00
*/
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
if ( ctx - > task & & cpuctx - > task_ctx ! = ctx ) {
if ( cpuctx - > task_ctx | | ctx - > task ! = current )
return ;
cpuctx - > task_ctx = ctx ;
}
2008-12-04 22:12:29 +03:00
2009-04-06 13:45:12 +04:00
spin_lock_irqsave ( & ctx - > lock , flags ) ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
ctx - > is_active = 1 ;
2009-04-06 13:45:10 +04:00
update_context_time ( ctx ) ;
2008-12-04 22:12:29 +03:00
/*
* Protect the list operation against NMI by disabling the
* counters on a global level . NOP for non NMI based counters .
*/
2009-05-13 18:21:38 +04:00
perf_disable ( ) ;
2008-12-04 22:12:29 +03:00
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
add_counter_to_ctx ( counter , ctx ) ;
2008-12-04 22:12:29 +03:00
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
/*
* Don ' t put the counter on if it is disabled or if
* it is in a group and the group isn ' t on .
*/
if ( counter - > state ! = PERF_COUNTER_STATE_INACTIVE | |
( leader ! = counter & & leader - > state ! = PERF_COUNTER_STATE_ACTIVE ) )
goto unlock ;
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
/*
* An exclusive counter can ' t go on if there are already active
* hardware counters , and no hardware counter can go on if there
* is already an exclusive counter on .
*/
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
if ( ! group_can_go_on ( counter , cpuctx , 1 ) )
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
err = - EEXIST ;
else
err = counter_sched_in ( counter , cpuctx , ctx , cpu ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
if ( err ) {
/*
* This counter couldn ' t go on . If it is in a group
* then we have to pull the whole group off .
* If the counter group is pinned then put it in error state .
*/
if ( leader ! = counter )
group_sched_out ( leader , cpuctx , ctx ) ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
if ( leader - > hw_event . pinned ) {
update_group_times ( leader ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
leader - > state = PERF_COUNTER_STATE_ERROR ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
}
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
}
2008-12-04 22:12:29 +03:00
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
if ( ! err & & ! ctx - > task & & cpuctx - > max_pertask )
2008-12-04 22:12:29 +03:00
cpuctx - > max_pertask - - ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
unlock :
2009-05-13 18:21:38 +04:00
perf_enable ( ) ;
2008-12-21 16:43:25 +03:00
2009-04-06 13:45:12 +04:00
spin_unlock_irqrestore ( & ctx - > lock , flags ) ;
2008-12-04 22:12:29 +03:00
}
/*
* Attach a performance counter to a context
*
* First we add the counter to the list with the hardware enable bit
* in counter - > hw_config cleared .
*
* If the counter is attached to a task which is on a CPU we use a smp
* call to enable it in the task context . The task might have been
* scheduled away , but we check this in the smp call again .
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
*
* Must be called with ctx - > mutex held .
2008-12-04 22:12:29 +03:00
*/
static void
perf_install_in_context ( struct perf_counter_context * ctx ,
struct perf_counter * counter ,
int cpu )
{
struct task_struct * task = ctx - > task ;
if ( ! task ) {
/*
* Per cpu counters are installed via an smp call and
* the install is always sucessful .
*/
smp_call_function_single ( cpu , __perf_install_in_context ,
counter , 1 ) ;
return ;
}
retry :
task_oncpu_function_call ( task , __perf_install_in_context ,
counter ) ;
spin_lock_irq ( & ctx - > lock ) ;
/*
* we need to retry the smp call .
*/
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
if ( ctx - > is_active & & list_empty ( & counter - > list_entry ) ) {
2008-12-04 22:12:29 +03:00
spin_unlock_irq ( & ctx - > lock ) ;
goto retry ;
}
/*
* The lock prevents that this context is scheduled in so we
* can add the counter safely , if it the call above did not
* succeed .
*/
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
if ( list_empty ( & counter - > list_entry ) )
add_counter_to_ctx ( counter , ctx ) ;
2008-12-04 22:12:29 +03:00
spin_unlock_irq ( & ctx - > lock ) ;
}
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
/*
* Cross CPU call to enable a performance counter
*/
static void __perf_counter_enable ( void * info )
2008-12-11 10:38:42 +03:00
{
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
struct perf_counter * counter = info ;
struct perf_cpu_context * cpuctx = & __get_cpu_var ( perf_cpu_context ) ;
struct perf_counter_context * ctx = counter - > ctx ;
struct perf_counter * leader = counter - > group_leader ;
unsigned long flags ;
int err ;
2008-12-11 10:38:42 +03:00
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
/*
* If this is a per - task counter , need to check whether this
* counter ' s task is the current task on this cpu .
*/
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
if ( ctx - > task & & cpuctx - > task_ctx ! = ctx ) {
if ( cpuctx - > task_ctx | | ctx - > task ! = current )
return ;
cpuctx - > task_ctx = ctx ;
}
2009-01-09 08:43:42 +03:00
2009-04-06 13:45:12 +04:00
spin_lock_irqsave ( & ctx - > lock , flags ) ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
ctx - > is_active = 1 ;
2009-04-06 13:45:10 +04:00
update_context_time ( ctx ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
perfcounters: make context switch and migration software counters work again
Jaswinder Singh Rajput reported that commit 23a185ca8abbeef caused the
context switch and migration software counters to report zero always.
With that commit, the software counters only count events that occur
between sched-in and sched-out for a task. This is necessary for the
counter enable/disable prctls and ioctls to work. However, the
context switch and migration counts are incremented after sched-out
for one task and before sched-in for the next. Since the increment
doesn't occur while a task is scheduled in (as far as the software
counters are concerned) it doesn't count towards any counter.
Thus the context switch and migration counters need to count events
that occur at any time, provided the counter is enabled, not just
those that occur while the task is scheduled in (from the perf_counter
subsystem's point of view). The problem though is that the software
counter code can't tell the difference between being enabled and being
scheduled in, and between being disabled and being scheduled out,
since we use the one pair of enable/disable entry points for both.
That is, the high-level disable operation simply arranges for the
counter to not be scheduled in any more, and the high-level enable
operation arranges for it to be scheduled in again.
One way to solve this would be to have sched_in/out operations in the
hw_perf_counter_ops struct as well as enable/disable. However, this
takes a simpler approach: it adds a 'prev_state' field to the
perf_counter struct that allows a counter's enable method to know
whether the counter was previously disabled or just inactive
(scheduled out), and therefore whether the enable method is being
called as a result of a high-level enable or a schedule-in operation.
This then allows the context switch, migration and page fault counters
to reset their hw.prev_count value in their enable functions only if
they are called as a result of a high-level enable operation.
Although page faults would normally only occur while the counter is
scheduled in, this changes the page fault counter code too in case
there are ever circumstances where page faults get counted against a
task while its counters are not scheduled in.
Reported-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13 14:10:34 +03:00
counter - > prev_state = counter - > state ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
if ( counter - > state > = PERF_COUNTER_STATE_INACTIVE )
goto unlock ;
counter - > state = PERF_COUNTER_STATE_INACTIVE ;
2009-04-06 13:45:10 +04:00
counter - > tstamp_enabled = ctx - > time - counter - > total_time_enabled ;
2008-12-11 10:38:42 +03:00
/*
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
* If the counter is in a group and isn ' t the group leader ,
* then don ' t put it on unless the group is on .
2008-12-11 10:38:42 +03:00
*/
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
if ( leader ! = counter & & leader - > state ! = PERF_COUNTER_STATE_ACTIVE )
goto unlock ;
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
2009-05-12 15:59:01 +04:00
if ( ! group_can_go_on ( counter , cpuctx , 1 ) ) {
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
err = - EEXIST ;
2009-05-12 15:59:01 +04:00
} else {
2009-05-13 18:21:38 +04:00
perf_disable ( ) ;
2009-05-12 15:59:01 +04:00
if ( counter = = leader )
err = group_sched_in ( counter , cpuctx , ctx ,
smp_processor_id ( ) ) ;
else
err = counter_sched_in ( counter , cpuctx , ctx ,
smp_processor_id ( ) ) ;
2009-05-13 18:21:38 +04:00
perf_enable ( ) ;
2009-05-12 15:59:01 +04:00
}
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
if ( err ) {
/*
* If this counter can ' t go on and it ' s part of a
* group , then the whole group has to come off .
*/
if ( leader ! = counter )
group_sched_out ( leader , cpuctx , ctx ) ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
if ( leader - > hw_event . pinned ) {
update_group_times ( leader ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
leader - > state = PERF_COUNTER_STATE_ERROR ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
}
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
}
unlock :
2009-04-06 13:45:12 +04:00
spin_unlock_irqrestore ( & ctx - > lock , flags ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
}
/*
* Enable a counter .
*/
static void perf_counter_enable ( struct perf_counter * counter )
{
struct perf_counter_context * ctx = counter - > ctx ;
struct task_struct * task = ctx - > task ;
if ( ! task ) {
/*
* Enable the counter on the cpu that it ' s on
*/
smp_call_function_single ( counter - > cpu , __perf_counter_enable ,
counter , 1 ) ;
return ;
}
spin_lock_irq ( & ctx - > lock ) ;
if ( counter - > state > = PERF_COUNTER_STATE_INACTIVE )
goto out ;
/*
* If the counter is in error state , clear that first .
* That way , if we see the counter in error state below , we
* know that it has gone back into error state , as distinct
* from the task having been scheduled away before the
* cross - call arrived .
*/
if ( counter - > state = = PERF_COUNTER_STATE_ERROR )
counter - > state = PERF_COUNTER_STATE_OFF ;
retry :
spin_unlock_irq ( & ctx - > lock ) ;
task_oncpu_function_call ( task , __perf_counter_enable , counter ) ;
spin_lock_irq ( & ctx - > lock ) ;
/*
* If the context is active and the counter is still off ,
* we need to retry the cross - call .
*/
if ( ctx - > is_active & & counter - > state = = PERF_COUNTER_STATE_OFF )
goto retry ;
/*
* Since we have the lock this context can ' t be scheduled
* in , so we can change the state safely .
*/
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
if ( counter - > state = = PERF_COUNTER_STATE_OFF ) {
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
counter - > state = PERF_COUNTER_STATE_INACTIVE ;
2009-04-06 13:45:10 +04:00
counter - > tstamp_enabled =
ctx - > time - counter - > total_time_enabled ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
}
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
out :
spin_unlock_irq ( & ctx - > lock ) ;
}
2009-05-05 19:50:26 +04:00
static int perf_counter_refresh ( struct perf_counter * counter , int refresh )
2009-04-06 13:45:07 +04:00
{
2009-05-05 19:50:26 +04:00
/*
* not supported on inherited counters
*/
if ( counter - > hw_event . inherit )
return - EINVAL ;
2009-04-06 13:45:07 +04:00
atomic_add ( refresh , & counter - > event_limit ) ;
perf_counter_enable ( counter ) ;
2009-05-05 19:50:26 +04:00
return 0 ;
2009-04-06 13:45:07 +04:00
}
2008-12-21 16:43:25 +03:00
void __perf_counter_sched_out ( struct perf_counter_context * ctx ,
struct perf_cpu_context * cpuctx )
{
struct perf_counter * counter ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
spin_lock ( & ctx - > lock ) ;
ctx - > is_active = 0 ;
2008-12-21 16:43:25 +03:00
if ( likely ( ! ctx - > nr_counters ) )
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
goto out ;
2009-04-06 13:45:10 +04:00
update_context_time ( ctx ) ;
2008-12-21 16:43:25 +03:00
2009-05-13 18:21:38 +04:00
perf_disable ( ) ;
2008-12-21 16:43:25 +03:00
if ( ctx - > nr_active ) {
2009-05-20 14:21:22 +04:00
list_for_each_entry ( counter , & ctx - > counter_list , list_entry ) {
if ( counter ! = counter - > group_leader )
counter_sched_out ( counter , cpuctx , ctx ) ;
else
group_sched_out ( counter , cpuctx , ctx ) ;
}
2008-12-21 16:43:25 +03:00
}
2009-05-13 18:21:38 +04:00
perf_enable ( ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
out :
2008-12-21 16:43:25 +03:00
spin_unlock ( & ctx - > lock ) ;
}
2008-12-04 22:12:29 +03:00
/*
* Called from scheduler to remove the counters of the current task ,
* with interrupts disabled .
*
* We stop each counter and update the counter value in counter - > count .
*
2008-12-17 16:20:28 +03:00
* This does not protect us against NMI , but disable ( )
2008-12-04 22:12:29 +03:00
* sets the disabled bit in the control field of counter _before_
* accessing the counter control register . If a NMI hits , then it will
* not restart the counter .
*/
void perf_counter_task_sched_out ( struct task_struct * task , int cpu )
{
struct perf_cpu_context * cpuctx = & per_cpu ( perf_cpu_context , cpu ) ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
struct perf_counter_context * ctx = task - > perf_counter_ctxp ;
2009-03-19 22:26:12 +03:00
struct pt_regs * regs ;
2008-12-04 22:12:29 +03:00
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
if ( likely ( ! ctx | | ! cpuctx - > task_ctx ) )
2008-12-04 22:12:29 +03:00
return ;
2009-04-06 13:45:13 +04:00
update_context_time ( ctx ) ;
2009-03-19 22:26:12 +03:00
regs = task_pt_regs ( task ) ;
2009-04-08 17:01:33 +04:00
perf_swcounter_event ( PERF_COUNT_CONTEXT_SWITCHES , 1 , 1 , regs , 0 ) ;
2008-12-21 16:43:25 +03:00
__perf_counter_sched_out ( ctx , cpuctx ) ;
2008-12-04 22:12:29 +03:00
cpuctx - > task_ctx = NULL ;
}
2009-05-11 09:46:10 +04:00
static void __perf_counter_task_sched_out ( struct perf_counter_context * ctx )
{
struct perf_cpu_context * cpuctx = & __get_cpu_var ( perf_cpu_context ) ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
if ( ! cpuctx - > task_ctx )
return ;
2009-05-11 09:46:10 +04:00
__perf_counter_sched_out ( ctx , cpuctx ) ;
cpuctx - > task_ctx = NULL ;
}
2008-12-21 16:43:25 +03:00
static void perf_counter_cpu_sched_out ( struct perf_cpu_context * cpuctx )
2008-12-11 10:38:42 +03:00
{
2008-12-21 16:43:25 +03:00
__perf_counter_sched_out ( & cpuctx - > ctx , cpuctx ) ;
2008-12-11 10:38:42 +03:00
}
2008-12-21 16:43:25 +03:00
static void
__perf_counter_sched_in ( struct perf_counter_context * ctx ,
struct perf_cpu_context * cpuctx , int cpu )
2008-12-04 22:12:29 +03:00
{
struct perf_counter * counter ;
2009-01-12 07:11:00 +03:00
int can_add_hw = 1 ;
2008-12-04 22:12:29 +03:00
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
spin_lock ( & ctx - > lock ) ;
ctx - > is_active = 1 ;
2008-12-04 22:12:29 +03:00
if ( likely ( ! ctx - > nr_counters ) )
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
goto out ;
2008-12-04 22:12:29 +03:00
2009-04-06 13:45:10 +04:00
ctx - > timestamp = perf_clock ( ) ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
2009-05-13 18:21:38 +04:00
perf_disable ( ) ;
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
/*
* First go through the list and put on any pinned groups
* in order to give them the best chance of going on .
*/
list_for_each_entry ( counter , & ctx - > counter_list , list_entry ) {
if ( counter - > state < = PERF_COUNTER_STATE_OFF | |
! counter - > hw_event . pinned )
continue ;
if ( counter - > cpu ! = - 1 & & counter - > cpu ! = cpu )
continue ;
2009-05-20 14:21:22 +04:00
if ( counter ! = counter - > group_leader )
counter_sched_in ( counter , cpuctx , ctx , cpu ) ;
else {
if ( group_can_go_on ( counter , cpuctx , 1 ) )
group_sched_in ( counter , cpuctx , ctx , cpu ) ;
}
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
/*
* If this pinned group hasn ' t been scheduled ,
* put it in error state .
*/
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
if ( counter - > state = = PERF_COUNTER_STATE_INACTIVE ) {
update_group_times ( counter ) ;
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
counter - > state = PERF_COUNTER_STATE_ERROR ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
}
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
}
2008-12-11 10:38:42 +03:00
list_for_each_entry ( counter , & ctx - > counter_list , list_entry ) {
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
/*
* Ignore counters in OFF or ERROR state , and
* ignore pinned counters since we did them already .
*/
if ( counter - > state < = PERF_COUNTER_STATE_OFF | |
counter - > hw_event . pinned )
continue ;
2008-12-11 10:38:42 +03:00
/*
* Listen to the ' cpu ' scheduling filter constraint
* of counters :
*/
2008-12-04 22:12:29 +03:00
if ( counter - > cpu ! = - 1 & & counter - > cpu ! = cpu )
continue ;
2009-05-20 14:21:22 +04:00
if ( counter ! = counter - > group_leader ) {
if ( counter_sched_in ( counter , cpuctx , ctx , cpu ) )
2009-01-12 07:11:00 +03:00
can_add_hw = 0 ;
2009-05-20 14:21:22 +04:00
} else {
if ( group_can_go_on ( counter , cpuctx , can_add_hw ) ) {
if ( group_sched_in ( counter , cpuctx , ctx , cpu ) )
can_add_hw = 0 ;
}
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
}
2008-12-04 22:12:29 +03:00
}
2009-05-13 18:21:38 +04:00
perf_enable ( ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
out :
2008-12-04 22:12:29 +03:00
spin_unlock ( & ctx - > lock ) ;
2008-12-21 16:43:25 +03:00
}
/*
* Called from scheduler to add the counters of the current task
* with interrupts disabled .
*
* We restore the counter value and then enable it .
*
* This does not protect us against NMI , but enable ( )
* sets the enabled bit in the control field of counter _before_
* accessing the counter control register . If a NMI hits , then it will
* keep the counter running .
*/
void perf_counter_task_sched_in ( struct task_struct * task , int cpu )
{
struct perf_cpu_context * cpuctx = & per_cpu ( perf_cpu_context , cpu ) ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
struct perf_counter_context * ctx = task - > perf_counter_ctxp ;
2008-12-11 10:38:42 +03:00
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
if ( likely ( ! ctx ) )
return ;
2008-12-21 16:43:25 +03:00
__perf_counter_sched_in ( ctx , cpuctx , cpu ) ;
2008-12-04 22:12:29 +03:00
cpuctx - > task_ctx = ctx ;
}
2008-12-21 16:43:25 +03:00
static void perf_counter_cpu_sched_in ( struct perf_cpu_context * cpuctx , int cpu )
{
struct perf_counter_context * ctx = & cpuctx - > ctx ;
__perf_counter_sched_in ( ctx , cpuctx , cpu ) ;
}
2008-12-11 16:59:31 +03:00
int perf_counter_task_disable ( void )
{
struct task_struct * curr = current ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
struct perf_counter_context * ctx = curr - > perf_counter_ctxp ;
2008-12-11 16:59:31 +03:00
struct perf_counter * counter ;
2008-12-17 16:10:57 +03:00
unsigned long flags ;
2008-12-11 16:59:31 +03:00
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
if ( ! ctx | | ! ctx - > nr_counters )
2008-12-11 16:59:31 +03:00
return 0 ;
2009-04-06 13:45:12 +04:00
local_irq_save ( flags ) ;
2008-12-11 16:59:31 +03:00
2009-05-11 09:46:10 +04:00
__perf_counter_task_sched_out ( ctx ) ;
2008-12-11 16:59:31 +03:00
spin_lock ( & ctx - > lock ) ;
/*
* Disable all the counters :
*/
2009-05-13 18:21:38 +04:00
perf_disable ( ) ;
2008-12-11 16:59:31 +03:00
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
list_for_each_entry ( counter , & ctx - > counter_list , list_entry ) {
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
if ( counter - > state ! = PERF_COUNTER_STATE_ERROR ) {
update_group_times ( counter ) ;
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
counter - > state = PERF_COUNTER_STATE_OFF ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
}
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
}
2008-12-12 15:49:45 +03:00
2009-05-13 18:21:38 +04:00
perf_enable ( ) ;
2008-12-11 16:59:31 +03:00
2009-04-06 13:45:12 +04:00
spin_unlock_irqrestore ( & ctx - > lock , flags ) ;
2008-12-11 16:59:31 +03:00
return 0 ;
}
int perf_counter_task_enable ( void )
{
struct task_struct * curr = current ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
struct perf_counter_context * ctx = curr - > perf_counter_ctxp ;
2008-12-11 16:59:31 +03:00
struct perf_counter * counter ;
2008-12-17 16:10:57 +03:00
unsigned long flags ;
2008-12-11 16:59:31 +03:00
int cpu ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
if ( ! ctx | | ! ctx - > nr_counters )
2008-12-11 16:59:31 +03:00
return 0 ;
2009-04-06 13:45:12 +04:00
local_irq_save ( flags ) ;
2008-12-11 16:59:31 +03:00
cpu = smp_processor_id ( ) ;
2009-05-11 09:46:10 +04:00
__perf_counter_task_sched_out ( ctx ) ;
2008-12-21 16:43:25 +03:00
2008-12-11 16:59:31 +03:00
spin_lock ( & ctx - > lock ) ;
/*
* Disable all the counters :
*/
2009-05-13 18:21:38 +04:00
perf_disable ( ) ;
2008-12-11 16:59:31 +03:00
list_for_each_entry ( counter , & ctx - > counter_list , list_entry ) {
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
if ( counter - > state > PERF_COUNTER_STATE_OFF )
2008-12-11 16:59:31 +03:00
continue ;
2008-12-11 17:17:03 +03:00
counter - > state = PERF_COUNTER_STATE_INACTIVE ;
2009-04-06 13:45:10 +04:00
counter - > tstamp_enabled =
ctx - > time - counter - > total_time_enabled ;
2008-12-17 16:10:57 +03:00
counter - > hw_event . disabled = 0 ;
2008-12-11 16:59:31 +03:00
}
2009-05-13 18:21:38 +04:00
perf_enable ( ) ;
2008-12-11 16:59:31 +03:00
spin_unlock ( & ctx - > lock ) ;
perf_counter_task_sched_in ( curr , cpu ) ;
2009-04-06 13:45:12 +04:00
local_irq_restore ( flags ) ;
2008-12-11 16:59:31 +03:00
return 0 ;
}
2009-05-20 14:21:20 +04:00
static void perf_log_period ( struct perf_counter * counter , u64 period ) ;
static void perf_adjust_freq ( struct perf_counter_context * ctx )
2009-05-15 17:19:28 +04:00
{
struct perf_counter * counter ;
u64 irq_period ;
u64 events , period ;
s64 delta ;
spin_lock ( & ctx - > lock ) ;
list_for_each_entry ( counter , & ctx - > counter_list , list_entry ) {
if ( counter - > state ! = PERF_COUNTER_STATE_ACTIVE )
continue ;
if ( ! counter - > hw_event . freq | | ! counter - > hw_event . irq_freq )
continue ;
events = HZ * counter - > hw . interrupts * counter - > hw . irq_period ;
period = div64_u64 ( events , counter - > hw_event . irq_freq ) ;
delta = ( s64 ) ( 1 + period - counter - > hw . irq_period ) ;
delta > > = 1 ;
irq_period = counter - > hw . irq_period + delta ;
if ( ! irq_period )
irq_period = 1 ;
2009-05-20 14:21:20 +04:00
perf_log_period ( counter , irq_period ) ;
2009-05-15 17:19:28 +04:00
counter - > hw . irq_period = irq_period ;
counter - > hw . interrupts = 0 ;
}
spin_unlock ( & ctx - > lock ) ;
}
2008-12-21 16:43:25 +03:00
/*
* Round - robin a context ' s counters :
*/
static void rotate_ctx ( struct perf_counter_context * ctx )
2008-12-04 22:12:29 +03:00
{
struct perf_counter * counter ;
2008-12-21 16:43:25 +03:00
if ( ! ctx - > nr_counters )
2008-12-04 22:12:29 +03:00
return ;
spin_lock ( & ctx - > lock ) ;
/*
2008-12-11 10:38:42 +03:00
* Rotate the first entry last ( works just fine for group counters too ) :
2008-12-04 22:12:29 +03:00
*/
2009-05-13 18:21:38 +04:00
perf_disable ( ) ;
2008-12-11 10:38:42 +03:00
list_for_each_entry ( counter , & ctx - > counter_list , list_entry ) {
2009-03-13 14:21:29 +03:00
list_move_tail ( & counter - > list_entry , & ctx - > counter_list ) ;
2008-12-04 22:12:29 +03:00
break ;
}
2009-05-13 18:21:38 +04:00
perf_enable ( ) ;
2008-12-04 22:12:29 +03:00
spin_unlock ( & ctx - > lock ) ;
2008-12-21 16:43:25 +03:00
}
void perf_counter_task_tick ( struct task_struct * curr , int cpu )
{
2009-05-08 20:52:21 +04:00
struct perf_cpu_context * cpuctx ;
struct perf_counter_context * ctx ;
if ( ! atomic_read ( & nr_counters ) )
return ;
cpuctx = & per_cpu ( perf_cpu_context , cpu ) ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
ctx = curr - > perf_counter_ctxp ;
2008-12-21 16:43:25 +03:00
2009-05-15 17:19:28 +04:00
perf_adjust_freq ( & cpuctx - > ctx ) ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
if ( ctx )
perf_adjust_freq ( ctx ) ;
2009-05-15 17:19:28 +04:00
2009-05-04 20:54:32 +04:00
perf_counter_cpu_sched_out ( cpuctx ) ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
if ( ctx )
__perf_counter_task_sched_out ( ctx ) ;
2008-12-04 22:12:29 +03:00
2009-05-04 20:54:32 +04:00
rotate_ctx ( & cpuctx - > ctx ) ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
if ( ctx )
rotate_ctx ( ctx ) ;
2008-12-21 16:43:25 +03:00
2009-05-04 20:54:32 +04:00
perf_counter_cpu_sched_in ( cpuctx , cpu ) ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
if ( ctx )
perf_counter_task_sched_in ( curr , cpu ) ;
2008-12-04 22:12:29 +03:00
}
/*
* Cross CPU call to read the hardware counter
*/
2008-12-17 16:20:28 +03:00
static void __read ( void * info )
2008-12-04 22:12:29 +03:00
{
2008-12-11 14:46:46 +03:00
struct perf_counter * counter = info ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
struct perf_counter_context * ctx = counter - > ctx ;
2008-12-17 16:10:57 +03:00
unsigned long flags ;
2008-12-11 14:46:46 +03:00
2009-04-06 13:45:12 +04:00
local_irq_save ( flags ) ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
if ( ctx - > is_active )
2009-04-06 13:45:10 +04:00
update_context_time ( ctx ) ;
2009-04-29 14:47:03 +04:00
counter - > pmu - > read ( counter ) ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
update_counter_times ( counter ) ;
2009-04-06 13:45:12 +04:00
local_irq_restore ( flags ) ;
2008-12-04 22:12:29 +03:00
}
2008-12-11 10:38:42 +03:00
static u64 perf_counter_read ( struct perf_counter * counter )
2008-12-04 22:12:29 +03:00
{
/*
* If counter is enabled and currently active on a CPU , update the
* value in the counter structure :
*/
2008-12-11 17:17:03 +03:00
if ( counter - > state = = PERF_COUNTER_STATE_ACTIVE ) {
2008-12-04 22:12:29 +03:00
smp_call_function_single ( counter - > oncpu ,
2008-12-17 16:20:28 +03:00
__read , counter , 1 ) ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
} else if ( counter - > state = = PERF_COUNTER_STATE_INACTIVE ) {
update_counter_times ( counter ) ;
2008-12-04 22:12:29 +03:00
}
2008-12-13 11:00:03 +03:00
return atomic64_read ( & counter - > count ) ;
2008-12-04 22:12:29 +03:00
}
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
/*
* Initialize the perf_counter context in a task_struct :
*/
static void
__perf_counter_init_context ( struct perf_counter_context * ctx ,
struct task_struct * task )
{
memset ( ctx , 0 , sizeof ( * ctx ) ) ;
spin_lock_init ( & ctx - > lock ) ;
mutex_init ( & ctx - > mutex ) ;
INIT_LIST_HEAD ( & ctx - > counter_list ) ;
INIT_LIST_HEAD ( & ctx - > event_list ) ;
atomic_set ( & ctx - > refcount , 1 ) ;
ctx - > task = task ;
}
2008-12-04 22:12:29 +03:00
static void put_context ( struct perf_counter_context * ctx )
{
if ( ctx - > task )
put_task_struct ( ctx - > task ) ;
}
static struct perf_counter_context * find_get_context ( pid_t pid , int cpu )
{
struct perf_cpu_context * cpuctx ;
struct perf_counter_context * ctx ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
struct perf_counter_context * tctx ;
2008-12-04 22:12:29 +03:00
struct task_struct * task ;
/*
* If cpu is not a wildcard then this is a percpu counter :
*/
if ( cpu ! = - 1 ) {
/* Must be root to operate on a CPU counter: */
2009-04-09 12:53:45 +04:00
if ( sysctl_perf_counter_priv & & ! capable ( CAP_SYS_ADMIN ) )
2008-12-04 22:12:29 +03:00
return ERR_PTR ( - EACCES ) ;
if ( cpu < 0 | | cpu > num_possible_cpus ( ) )
return ERR_PTR ( - EINVAL ) ;
/*
* We could be clever and allow to attach a counter to an
* offline CPU and activate it when the CPU comes up , but
* that ' s for later .
*/
if ( ! cpu_isset ( cpu , cpu_online_map ) )
return ERR_PTR ( - ENODEV ) ;
cpuctx = & per_cpu ( perf_cpu_context , cpu ) ;
ctx = & cpuctx - > ctx ;
return ctx ;
}
rcu_read_lock ( ) ;
if ( ! pid )
task = current ;
else
task = find_task_by_vpid ( pid ) ;
if ( task )
get_task_struct ( task ) ;
rcu_read_unlock ( ) ;
if ( ! task )
return ERR_PTR ( - ESRCH ) ;
/* Reuse ptrace permission checks for now. */
if ( ! ptrace_may_access ( task , PTRACE_MODE_READ ) ) {
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
put_task_struct ( task ) ;
2008-12-04 22:12:29 +03:00
return ERR_PTR ( - EACCES ) ;
}
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
ctx = task - > perf_counter_ctxp ;
if ( ! ctx ) {
ctx = kmalloc ( sizeof ( struct perf_counter_context ) , GFP_KERNEL ) ;
if ( ! ctx ) {
put_task_struct ( task ) ;
return ERR_PTR ( - ENOMEM ) ;
}
__perf_counter_init_context ( ctx , task ) ;
/*
* Make sure other cpus see correct values for * ctx
* once task - > perf_counter_ctxp is visible to them .
*/
smp_wmb ( ) ;
tctx = cmpxchg ( & task - > perf_counter_ctxp , NULL , ctx ) ;
if ( tctx ) {
/*
* We raced with some other task ; use
* the context they set .
*/
kfree ( ctx ) ;
ctx = tctx ;
}
}
2008-12-04 22:12:29 +03:00
return ctx ;
}
2009-03-13 14:21:36 +03:00
static void free_counter_rcu ( struct rcu_head * head )
{
struct perf_counter * counter ;
counter = container_of ( head , struct perf_counter , rcu_head ) ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
put_ctx ( counter - > ctx ) ;
2009-03-13 14:21:36 +03:00
kfree ( counter ) ;
}
2009-03-30 21:07:02 +04:00
static void perf_pending_sync ( struct perf_counter * counter ) ;
2009-03-19 22:26:16 +03:00
static void free_counter ( struct perf_counter * counter )
{
2009-03-30 21:07:02 +04:00
perf_pending_sync ( counter ) ;
2009-05-08 20:52:21 +04:00
atomic_dec ( & nr_counters ) ;
2009-04-09 12:53:44 +04:00
if ( counter - > hw_event . mmap )
atomic_dec ( & nr_mmap_tracking ) ;
if ( counter - > hw_event . munmap )
atomic_dec ( & nr_munmap_tracking ) ;
if ( counter - > hw_event . comm )
atomic_dec ( & nr_comm_tracking ) ;
2009-03-19 22:26:17 +03:00
if ( counter - > destroy )
counter - > destroy ( counter ) ;
2009-03-19 22:26:16 +03:00
call_rcu ( & counter - > rcu_head , free_counter_rcu ) ;
}
2008-12-04 22:12:29 +03:00
/*
* Called when the last reference to the file is gone .
*/
static int perf_release ( struct inode * inode , struct file * file )
{
struct perf_counter * counter = file - > private_data ;
struct perf_counter_context * ctx = counter - > ctx ;
file - > private_data = NULL ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
mutex_lock ( & ctx - > mutex ) ;
2008-12-04 22:12:29 +03:00
mutex_lock ( & counter - > mutex ) ;
2008-12-11 10:38:42 +03:00
perf_counter_remove_from_context ( counter ) ;
2008-12-04 22:12:29 +03:00
mutex_unlock ( & counter - > mutex ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
mutex_unlock ( & ctx - > mutex ) ;
2008-12-04 22:12:29 +03:00
2009-03-19 22:26:16 +03:00
free_counter ( counter ) ;
2009-02-11 12:53:37 +03:00
put_context ( ctx ) ;
2008-12-04 22:12:29 +03:00
return 0 ;
}
/*
* Read the performance counter - simple non blocking version for now
*/
static ssize_t
perf_read_hw ( struct perf_counter * counter , char __user * buf , size_t count )
{
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
u64 values [ 3 ] ;
int n ;
2008-12-04 22:12:29 +03:00
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
/*
* Return end - of - file for a read on a counter that is in
* error state ( i . e . because it was pinned but it couldn ' t be
* scheduled on to the CPU at some point ) .
*/
if ( counter - > state = = PERF_COUNTER_STATE_ERROR )
return 0 ;
2008-12-04 22:12:29 +03:00
mutex_lock ( & counter - > mutex ) ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
values [ 0 ] = perf_counter_read ( counter ) ;
n = 1 ;
if ( counter - > hw_event . read_format & PERF_FORMAT_TOTAL_TIME_ENABLED )
values [ n + + ] = counter - > total_time_enabled +
atomic64_read ( & counter - > child_total_time_enabled ) ;
if ( counter - > hw_event . read_format & PERF_FORMAT_TOTAL_TIME_RUNNING )
values [ n + + ] = counter - > total_time_running +
atomic64_read ( & counter - > child_total_time_running ) ;
2008-12-04 22:12:29 +03:00
mutex_unlock ( & counter - > mutex ) ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
if ( count < n * sizeof ( u64 ) )
return - EINVAL ;
count = n * sizeof ( u64 ) ;
if ( copy_to_user ( buf , values , count ) )
return - EFAULT ;
return count ;
2008-12-04 22:12:29 +03:00
}
static ssize_t
perf_read ( struct file * file , char __user * buf , size_t count , loff_t * ppos )
{
struct perf_counter * counter = file - > private_data ;
2009-03-23 20:22:10 +03:00
return perf_read_hw ( counter , buf , count ) ;
2008-12-04 22:12:29 +03:00
}
static unsigned int perf_poll ( struct file * file , poll_table * wait )
{
struct perf_counter * counter = file - > private_data ;
2009-03-24 15:18:16 +03:00
struct perf_mmap_data * data ;
2009-05-01 14:23:16 +04:00
unsigned int events = POLL_HUP ;
2009-03-24 15:18:16 +03:00
rcu_read_lock ( ) ;
data = rcu_dereference ( counter - > data ) ;
if ( data )
2009-05-01 14:23:16 +04:00
events = atomic_xchg ( & data - > poll , 0 ) ;
2009-03-24 15:18:16 +03:00
rcu_read_unlock ( ) ;
2008-12-04 22:12:29 +03:00
poll_wait ( file , & counter - > waitq , wait ) ;
return events ;
}
2009-05-05 19:50:23 +04:00
static void perf_counter_reset ( struct perf_counter * counter )
{
2009-05-08 20:52:22 +04:00
( void ) perf_counter_read ( counter ) ;
2009-05-11 09:50:21 +04:00
atomic64_set ( & counter - > count , 0 ) ;
2009-05-08 20:52:22 +04:00
perf_counter_update_userpage ( counter ) ;
}
static void perf_counter_for_each_sibling ( struct perf_counter * counter ,
void ( * func ) ( struct perf_counter * ) )
{
struct perf_counter_context * ctx = counter - > ctx ;
struct perf_counter * sibling ;
spin_lock_irq ( & ctx - > lock ) ;
counter = counter - > group_leader ;
func ( counter ) ;
list_for_each_entry ( sibling , & counter - > sibling_list , list_entry )
func ( sibling ) ;
spin_unlock_irq ( & ctx - > lock ) ;
}
static void perf_counter_for_each_child ( struct perf_counter * counter ,
void ( * func ) ( struct perf_counter * ) )
{
struct perf_counter * child ;
mutex_lock ( & counter - > mutex ) ;
func ( counter ) ;
list_for_each_entry ( child , & counter - > child_list , child_list )
func ( child ) ;
mutex_unlock ( & counter - > mutex ) ;
}
static void perf_counter_for_each ( struct perf_counter * counter ,
void ( * func ) ( struct perf_counter * ) )
{
struct perf_counter * child ;
mutex_lock ( & counter - > mutex ) ;
perf_counter_for_each_sibling ( counter , func ) ;
list_for_each_entry ( child , & counter - > child_list , child_list )
perf_counter_for_each_sibling ( child , func ) ;
mutex_unlock ( & counter - > mutex ) ;
2009-05-05 19:50:23 +04:00
}
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
static long perf_ioctl ( struct file * file , unsigned int cmd , unsigned long arg )
{
struct perf_counter * counter = file - > private_data ;
2009-05-08 20:52:22 +04:00
void ( * func ) ( struct perf_counter * ) ;
u32 flags = arg ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
switch ( cmd ) {
case PERF_COUNTER_IOC_ENABLE :
2009-05-08 20:52:22 +04:00
func = perf_counter_enable ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
break ;
case PERF_COUNTER_IOC_DISABLE :
2009-05-08 20:52:22 +04:00
func = perf_counter_disable ;
2009-04-06 13:45:07 +04:00
break ;
2009-05-05 19:50:23 +04:00
case PERF_COUNTER_IOC_RESET :
2009-05-08 20:52:22 +04:00
func = perf_counter_reset ;
2009-05-05 19:50:23 +04:00
break ;
2009-05-08 20:52:22 +04:00
case PERF_COUNTER_IOC_REFRESH :
return perf_counter_refresh ( counter , arg ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
default :
2009-05-08 20:52:22 +04:00
return - ENOTTY ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
}
2009-05-08 20:52:22 +04:00
if ( flags & PERF_IOC_FLAG_GROUP )
perf_counter_for_each ( counter , func ) ;
else
perf_counter_for_each_child ( counter , func ) ;
return 0 ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
}
2009-03-30 21:07:03 +04:00
/*
* Callers need to ensure there can be no nesting of this function , otherwise
* the seqlock logic goes bad . We can not serialize this because the arch
* code calls this from NMI context .
*/
void perf_counter_update_userpage ( struct perf_counter * counter )
2009-03-23 20:22:08 +03:00
{
2009-03-30 21:07:03 +04:00
struct perf_mmap_data * data ;
struct perf_counter_mmap_page * userpg ;
rcu_read_lock ( ) ;
data = rcu_dereference ( counter - > data ) ;
if ( ! data )
goto unlock ;
userpg = data - > user_page ;
2009-03-23 20:22:08 +03:00
2009-03-23 20:22:10 +03:00
/*
* Disable preemption so as to not let the corresponding user - space
* spin too long if we get preempted .
*/
preempt_disable ( ) ;
2009-03-23 20:22:08 +03:00
+ + userpg - > lock ;
2009-04-02 13:12:04 +04:00
barrier ( ) ;
2009-03-23 20:22:08 +03:00
userpg - > index = counter - > hw . idx ;
userpg - > offset = atomic64_read ( & counter - > count ) ;
if ( counter - > state = = PERF_COUNTER_STATE_ACTIVE )
userpg - > offset - = atomic64_read ( & counter - > hw . prev_count ) ;
2009-03-23 20:22:10 +03:00
2009-04-02 13:12:04 +04:00
barrier ( ) ;
2009-03-23 20:22:08 +03:00
+ + userpg - > lock ;
2009-03-23 20:22:10 +03:00
preempt_enable ( ) ;
2009-03-30 21:07:03 +04:00
unlock :
2009-03-23 20:22:10 +03:00
rcu_read_unlock ( ) ;
2009-03-23 20:22:08 +03:00
}
static int perf_mmap_fault ( struct vm_area_struct * vma , struct vm_fault * vmf )
{
struct perf_counter * counter = vma - > vm_file - > private_data ;
2009-03-23 20:22:10 +03:00
struct perf_mmap_data * data ;
int ret = VM_FAULT_SIGBUS ;
rcu_read_lock ( ) ;
data = rcu_dereference ( counter - > data ) ;
if ( ! data )
goto unlock ;
if ( vmf - > pgoff = = 0 ) {
vmf - > page = virt_to_page ( data - > user_page ) ;
} else {
int nr = vmf - > pgoff - 1 ;
2009-03-23 20:22:08 +03:00
2009-03-23 20:22:10 +03:00
if ( ( unsigned ) nr > data - > nr_pages )
goto unlock ;
2009-03-23 20:22:08 +03:00
2009-03-23 20:22:10 +03:00
vmf - > page = virt_to_page ( data - > data_pages [ nr ] ) ;
}
2009-03-23 20:22:08 +03:00
get_page ( vmf - > page ) ;
2009-03-23 20:22:10 +03:00
ret = 0 ;
unlock :
rcu_read_unlock ( ) ;
return ret ;
}
static int perf_mmap_data_alloc ( struct perf_counter * counter , int nr_pages )
{
struct perf_mmap_data * data ;
unsigned long size ;
int i ;
WARN_ON ( atomic_read ( & counter - > mmap_count ) ) ;
size = sizeof ( struct perf_mmap_data ) ;
size + = nr_pages * sizeof ( void * ) ;
data = kzalloc ( size , GFP_KERNEL ) ;
if ( ! data )
goto fail ;
data - > user_page = ( void * ) get_zeroed_page ( GFP_KERNEL ) ;
if ( ! data - > user_page )
goto fail_user_page ;
for ( i = 0 ; i < nr_pages ; i + + ) {
data - > data_pages [ i ] = ( void * ) get_zeroed_page ( GFP_KERNEL ) ;
if ( ! data - > data_pages [ i ] )
goto fail_data_pages ;
}
data - > nr_pages = nr_pages ;
2009-05-05 19:50:25 +04:00
atomic_set ( & data - > lock , - 1 ) ;
2009-03-23 20:22:10 +03:00
rcu_assign_pointer ( counter - > data , data ) ;
2009-03-23 20:22:08 +03:00
return 0 ;
2009-03-23 20:22:10 +03:00
fail_data_pages :
for ( i - - ; i > = 0 ; i - - )
free_page ( ( unsigned long ) data - > data_pages [ i ] ) ;
free_page ( ( unsigned long ) data - > user_page ) ;
fail_user_page :
kfree ( data ) ;
fail :
return - ENOMEM ;
}
static void __perf_mmap_data_free ( struct rcu_head * rcu_head )
{
struct perf_mmap_data * data = container_of ( rcu_head ,
struct perf_mmap_data , rcu_head ) ;
int i ;
free_page ( ( unsigned long ) data - > user_page ) ;
for ( i = 0 ; i < data - > nr_pages ; i + + )
free_page ( ( unsigned long ) data - > data_pages [ i ] ) ;
kfree ( data ) ;
}
static void perf_mmap_data_free ( struct perf_counter * counter )
{
struct perf_mmap_data * data = counter - > data ;
WARN_ON ( atomic_read ( & counter - > mmap_count ) ) ;
rcu_assign_pointer ( counter - > data , NULL ) ;
call_rcu ( & data - > rcu_head , __perf_mmap_data_free ) ;
}
static void perf_mmap_open ( struct vm_area_struct * vma )
{
struct perf_counter * counter = vma - > vm_file - > private_data ;
atomic_inc ( & counter - > mmap_count ) ;
}
static void perf_mmap_close ( struct vm_area_struct * vma )
{
struct perf_counter * counter = vma - > vm_file - > private_data ;
if ( atomic_dec_and_mutex_lock ( & counter - > mmap_count ,
& counter - > mmap_mutex ) ) {
2009-05-15 17:19:27 +04:00
struct user_struct * user = current_user ( ) ;
atomic_long_sub ( counter - > data - > nr_pages + 1 , & user - > locked_vm ) ;
2009-05-05 19:50:24 +04:00
vma - > vm_mm - > locked_vm - = counter - > data - > nr_locked ;
2009-03-23 20:22:10 +03:00
perf_mmap_data_free ( counter ) ;
mutex_unlock ( & counter - > mmap_mutex ) ;
}
2009-03-23 20:22:08 +03:00
}
static struct vm_operations_struct perf_mmap_vmops = {
2009-04-06 13:45:05 +04:00
. open = perf_mmap_open ,
2009-03-23 20:22:10 +03:00
. close = perf_mmap_close ,
2009-03-23 20:22:08 +03:00
. fault = perf_mmap_fault ,
} ;
static int perf_mmap ( struct file * file , struct vm_area_struct * vma )
{
struct perf_counter * counter = file - > private_data ;
2009-05-15 17:19:27 +04:00
struct user_struct * user = current_user ( ) ;
2009-03-23 20:22:10 +03:00
unsigned long vma_size ;
unsigned long nr_pages ;
2009-05-15 17:19:27 +04:00
unsigned long user_locked , user_lock_limit ;
2009-03-23 20:22:10 +03:00
unsigned long locked , lock_limit ;
2009-05-15 17:19:27 +04:00
long user_extra , extra ;
2009-03-23 20:22:10 +03:00
int ret = 0 ;
2009-03-23 20:22:08 +03:00
if ( ! ( vma - > vm_flags & VM_SHARED ) | | ( vma - > vm_flags & VM_WRITE ) )
return - EINVAL ;
2009-03-23 20:22:10 +03:00
vma_size = vma - > vm_end - vma - > vm_start ;
nr_pages = ( vma_size / PAGE_SIZE ) - 1 ;
2009-03-25 14:48:31 +03:00
/*
* If we have data pages ensure they ' re a power - of - two number , so we
* can do bitmasks instead of modulo .
*/
if ( nr_pages ! = 0 & & ! is_power_of_2 ( nr_pages ) )
2009-03-23 20:22:08 +03:00
return - EINVAL ;
2009-03-23 20:22:10 +03:00
if ( vma_size ! = PAGE_SIZE * ( 1 + nr_pages ) )
2009-03-23 20:22:08 +03:00
return - EINVAL ;
2009-03-23 20:22:10 +03:00
if ( vma - > vm_pgoff ! = 0 )
return - EINVAL ;
2009-03-23 20:22:08 +03:00
2009-04-06 13:45:05 +04:00
mutex_lock ( & counter - > mmap_mutex ) ;
if ( atomic_inc_not_zero ( & counter - > mmap_count ) ) {
if ( nr_pages ! = counter - > data - > nr_pages )
ret = - EINVAL ;
goto unlock ;
}
2009-05-15 17:19:27 +04:00
user_extra = nr_pages + 1 ;
user_lock_limit = sysctl_perf_counter_mlock > > ( PAGE_SHIFT - 10 ) ;
user_locked = atomic_long_read ( & user - > locked_vm ) + user_extra ;
2009-05-05 19:50:24 +04:00
2009-05-15 17:19:27 +04:00
extra = 0 ;
if ( user_locked > user_lock_limit )
extra = user_locked - user_lock_limit ;
2009-03-23 20:22:10 +03:00
lock_limit = current - > signal - > rlim [ RLIMIT_MEMLOCK ] . rlim_cur ;
lock_limit > > = PAGE_SHIFT ;
2009-05-15 17:19:27 +04:00
locked = vma - > vm_mm - > locked_vm + extra ;
2009-03-23 20:22:10 +03:00
2009-04-06 13:45:05 +04:00
if ( ( locked > lock_limit ) & & ! capable ( CAP_IPC_LOCK ) ) {
ret = - EPERM ;
goto unlock ;
}
2009-03-23 20:22:10 +03:00
WARN_ON ( counter - > data ) ;
ret = perf_mmap_data_alloc ( counter , nr_pages ) ;
2009-04-06 13:45:05 +04:00
if ( ret )
goto unlock ;
atomic_set ( & counter - > mmap_count , 1 ) ;
2009-05-15 17:19:27 +04:00
atomic_long_add ( user_extra , & user - > locked_vm ) ;
2009-05-05 19:50:24 +04:00
vma - > vm_mm - > locked_vm + = extra ;
counter - > data - > nr_locked = extra ;
2009-04-06 13:45:05 +04:00
unlock :
2009-03-23 20:22:10 +03:00
mutex_unlock ( & counter - > mmap_mutex ) ;
2009-03-23 20:22:08 +03:00
vma - > vm_flags & = ~ VM_MAYWRITE ;
vma - > vm_flags | = VM_RESERVED ;
vma - > vm_ops = & perf_mmap_vmops ;
2009-03-23 20:22:10 +03:00
return ret ;
2009-03-23 20:22:08 +03:00
}
2009-04-06 13:45:01 +04:00
static int perf_fasync ( int fd , struct file * filp , int on )
{
struct perf_counter * counter = filp - > private_data ;
struct inode * inode = filp - > f_path . dentry - > d_inode ;
int retval ;
mutex_lock ( & inode - > i_mutex ) ;
retval = fasync_helper ( fd , filp , on , & counter - > fasync ) ;
mutex_unlock ( & inode - > i_mutex ) ;
if ( retval < 0 )
return retval ;
return 0 ;
}
2008-12-04 22:12:29 +03:00
static const struct file_operations perf_fops = {
. release = perf_release ,
. read = perf_read ,
. poll = perf_poll ,
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
. unlocked_ioctl = perf_ioctl ,
. compat_ioctl = perf_ioctl ,
2009-03-23 20:22:08 +03:00
. mmap = perf_mmap ,
2009-04-06 13:45:01 +04:00
. fasync = perf_fasync ,
2008-12-04 22:12:29 +03:00
} ;
2009-03-30 21:07:02 +04:00
/*
* Perf counter wakeup
*
* If there ' s data , ensure we set the poll ( ) state and publish everything
* to user - space before waking everybody up .
*/
void perf_counter_wakeup ( struct perf_counter * counter )
{
wake_up_all ( & counter - > waitq ) ;
2009-04-06 13:45:09 +04:00
if ( counter - > pending_kill ) {
kill_fasync ( & counter - > fasync , SIGIO , counter - > pending_kill ) ;
counter - > pending_kill = 0 ;
}
2009-03-30 21:07:02 +04:00
}
/*
* Pending wakeups
*
* Handle the case where we need to wakeup up from NMI ( or rq - > lock ) context .
*
* The NMI bit means we cannot possibly take locks . Therefore , maintain a
* single linked list and use cmpxchg ( ) to add entries lockless .
*/
2009-04-06 13:45:07 +04:00
static void perf_pending_counter ( struct perf_pending_entry * entry )
{
struct perf_counter * counter = container_of ( entry ,
struct perf_counter , pending ) ;
if ( counter - > pending_disable ) {
counter - > pending_disable = 0 ;
perf_counter_disable ( counter ) ;
}
if ( counter - > pending_wakeup ) {
counter - > pending_wakeup = 0 ;
perf_counter_wakeup ( counter ) ;
}
}
2009-04-06 13:45:02 +04:00
# define PENDING_TAIL ((struct perf_pending_entry *)-1UL)
2009-03-30 21:07:02 +04:00
2009-04-06 13:45:02 +04:00
static DEFINE_PER_CPU ( struct perf_pending_entry * , perf_pending_head ) = {
2009-03-30 21:07:02 +04:00
PENDING_TAIL ,
} ;
2009-04-06 13:45:02 +04:00
static void perf_pending_queue ( struct perf_pending_entry * entry ,
void ( * func ) ( struct perf_pending_entry * ) )
2009-03-30 21:07:02 +04:00
{
2009-04-06 13:45:02 +04:00
struct perf_pending_entry * * head ;
2009-03-30 21:07:02 +04:00
2009-04-06 13:45:02 +04:00
if ( cmpxchg ( & entry - > next , NULL , PENDING_TAIL ) ! = NULL )
2009-03-30 21:07:02 +04:00
return ;
2009-04-06 13:45:02 +04:00
entry - > func = func ;
head = & get_cpu_var ( perf_pending_head ) ;
2009-03-30 21:07:02 +04:00
do {
2009-04-06 13:45:02 +04:00
entry - > next = * head ;
} while ( cmpxchg ( head , entry - > next , entry ) ! = entry - > next ) ;
2009-03-30 21:07:02 +04:00
set_perf_counter_pending ( ) ;
2009-04-06 13:45:02 +04:00
put_cpu_var ( perf_pending_head ) ;
2009-03-30 21:07:02 +04:00
}
static int __perf_pending_run ( void )
{
2009-04-06 13:45:02 +04:00
struct perf_pending_entry * list ;
2009-03-30 21:07:02 +04:00
int nr = 0 ;
2009-04-06 13:45:02 +04:00
list = xchg ( & __get_cpu_var ( perf_pending_head ) , PENDING_TAIL ) ;
2009-03-30 21:07:02 +04:00
while ( list ! = PENDING_TAIL ) {
2009-04-06 13:45:02 +04:00
void ( * func ) ( struct perf_pending_entry * ) ;
struct perf_pending_entry * entry = list ;
2009-03-30 21:07:02 +04:00
list = list - > next ;
2009-04-06 13:45:02 +04:00
func = entry - > func ;
entry - > next = NULL ;
2009-03-30 21:07:02 +04:00
/*
* Ensure we observe the unqueue before we issue the wakeup ,
* so that we won ' t be waiting forever .
* - - see perf_not_pending ( ) .
*/
smp_wmb ( ) ;
2009-04-06 13:45:02 +04:00
func ( entry ) ;
2009-03-30 21:07:02 +04:00
nr + + ;
}
return nr ;
}
static inline int perf_not_pending ( struct perf_counter * counter )
{
/*
* If we flush on whatever cpu we run , there is a chance we don ' t
* need to wait .
*/
get_cpu ( ) ;
__perf_pending_run ( ) ;
put_cpu ( ) ;
/*
* Ensure we see the proper queue state before going to sleep
* so that we do not miss the wakeup . - - see perf_pending_handle ( )
*/
smp_rmb ( ) ;
2009-04-06 13:45:02 +04:00
return counter - > pending . next = = NULL ;
2009-03-30 21:07:02 +04:00
}
static void perf_pending_sync ( struct perf_counter * counter )
{
wait_event ( counter - > waitq , perf_not_pending ( counter ) ) ;
}
void perf_counter_do_pending ( void )
{
__perf_pending_run ( ) ;
}
2009-03-30 21:07:14 +04:00
/*
* Callchain support - - arch specific
*/
2009-04-06 13:45:00 +04:00
__weak struct perf_callchain_entry * perf_callchain ( struct pt_regs * regs )
2009-03-30 21:07:14 +04:00
{
return NULL ;
}
2009-03-19 22:26:19 +03:00
/*
* Output
*/
2009-03-25 14:30:22 +03:00
struct perf_output_handle {
struct perf_counter * counter ;
struct perf_mmap_data * data ;
unsigned int offset ;
2009-03-25 14:30:24 +03:00
unsigned int head ;
2009-03-30 21:07:11 +04:00
int nmi ;
2009-04-06 13:45:09 +04:00
int overflow ;
2009-05-01 14:23:16 +04:00
int locked ;
unsigned long flags ;
2009-03-25 14:30:22 +03:00
} ;
2009-05-01 14:23:16 +04:00
static void perf_output_wakeup ( struct perf_output_handle * handle )
2009-03-30 21:07:11 +04:00
{
2009-05-01 14:23:16 +04:00
atomic_set ( & handle - > data - > poll , POLL_IN ) ;
2009-04-06 13:45:02 +04:00
if ( handle - > nmi ) {
2009-04-06 13:45:07 +04:00
handle - > counter - > pending_wakeup = 1 ;
2009-04-06 13:45:02 +04:00
perf_pending_queue ( & handle - > counter - > pending ,
2009-04-06 13:45:07 +04:00
perf_pending_counter ) ;
2009-04-06 13:45:02 +04:00
} else
2009-03-30 21:07:11 +04:00
perf_counter_wakeup ( handle - > counter ) ;
}
2009-05-01 14:23:16 +04:00
/*
* Curious locking construct .
*
* We need to ensure a later event doesn ' t publish a head when a former
* event isn ' t done writing . However since we need to deal with NMIs we
* cannot fully serialize things .
*
* What we do is serialize between CPUs so we only have to deal with NMI
* nesting on a single CPU .
*
* We only publish the head ( and generate a wakeup ) when the outer - most
* event completes .
*/
static void perf_output_lock ( struct perf_output_handle * handle )
{
struct perf_mmap_data * data = handle - > data ;
int cpu ;
handle - > locked = 0 ;
local_irq_save ( handle - > flags ) ;
cpu = smp_processor_id ( ) ;
if ( in_nmi ( ) & & atomic_read ( & data - > lock ) = = cpu )
return ;
2009-05-05 19:50:25 +04:00
while ( atomic_cmpxchg ( & data - > lock , - 1 , cpu ) ! = - 1 )
2009-05-01 14:23:16 +04:00
cpu_relax ( ) ;
handle - > locked = 1 ;
}
static void perf_output_unlock ( struct perf_output_handle * handle )
{
struct perf_mmap_data * data = handle - > data ;
int head , cpu ;
2009-05-05 19:50:22 +04:00
data - > done_head = data - > head ;
2009-05-01 14:23:16 +04:00
if ( ! handle - > locked )
goto out ;
again :
/*
* The xchg implies a full barrier that ensures all writes are done
* before we publish the new head , matched by a rmb ( ) in userspace when
* reading this position .
*/
2009-05-05 19:50:22 +04:00
while ( ( head = atomic_xchg ( & data - > done_head , 0 ) ) )
2009-05-01 14:23:16 +04:00
data - > user_page - > data_head = head ;
/*
2009-05-05 19:50:22 +04:00
* NMI can happen here , which means we can miss a done_head update .
2009-05-01 14:23:16 +04:00
*/
2009-05-05 19:50:25 +04:00
cpu = atomic_xchg ( & data - > lock , - 1 ) ;
2009-05-01 14:23:16 +04:00
WARN_ON_ONCE ( cpu ! = smp_processor_id ( ) ) ;
/*
* Therefore we have to validate we did not indeed do so .
*/
2009-05-05 19:50:22 +04:00
if ( unlikely ( atomic_read ( & data - > done_head ) ) ) {
2009-05-01 14:23:16 +04:00
/*
* Since we had it locked , we can lock it again .
*/
2009-05-05 19:50:25 +04:00
while ( atomic_cmpxchg ( & data - > lock , - 1 , cpu ) ! = - 1 )
2009-05-01 14:23:16 +04:00
cpu_relax ( ) ;
goto again ;
}
2009-05-05 19:50:22 +04:00
if ( atomic_xchg ( & data - > wakeup , 0 ) )
2009-05-01 14:23:16 +04:00
perf_output_wakeup ( handle ) ;
out :
local_irq_restore ( handle - > flags ) ;
}
2009-03-25 14:30:22 +03:00
static int perf_output_begin ( struct perf_output_handle * handle ,
2009-03-30 21:07:11 +04:00
struct perf_counter * counter , unsigned int size ,
2009-04-06 13:45:09 +04:00
int nmi , int overflow )
2009-03-19 22:26:19 +03:00
{
2009-03-23 20:22:10 +03:00
struct perf_mmap_data * data ;
2009-03-25 14:30:22 +03:00
unsigned int offset , head ;
2009-03-19 22:26:19 +03:00
2009-05-05 19:50:26 +04:00
/*
* For inherited counters we send all the output towards the parent .
*/
if ( counter - > parent )
counter = counter - > parent ;
2009-03-23 20:22:10 +03:00
rcu_read_lock ( ) ;
data = rcu_dereference ( counter - > data ) ;
if ( ! data )
goto out ;
2009-05-01 14:23:16 +04:00
handle - > data = data ;
2009-04-06 13:45:09 +04:00
handle - > counter = counter ;
handle - > nmi = nmi ;
handle - > overflow = overflow ;
2009-03-30 21:07:11 +04:00
2009-03-23 20:22:10 +03:00
if ( ! data - > nr_pages )
2009-03-30 21:07:11 +04:00
goto fail ;
2009-03-23 20:22:10 +03:00
2009-05-01 14:23:16 +04:00
perf_output_lock ( handle ) ;
2009-03-23 20:22:10 +03:00
do {
offset = head = atomic_read ( & data - > head ) ;
2009-03-24 15:18:16 +03:00
head + = size ;
2009-03-23 20:22:10 +03:00
} while ( atomic_cmpxchg ( & data - > head , offset , head ) ! = offset ) ;
2009-03-25 14:30:22 +03:00
handle - > offset = offset ;
2009-03-25 14:30:24 +03:00
handle - > head = head ;
2009-05-05 19:50:22 +04:00
if ( ( offset > > PAGE_SHIFT ) ! = ( head > > PAGE_SHIFT ) )
atomic_set ( & data - > wakeup , 1 ) ;
2009-03-19 22:26:19 +03:00
2009-03-25 14:30:22 +03:00
return 0 ;
2009-03-23 20:22:10 +03:00
2009-03-30 21:07:11 +04:00
fail :
2009-05-01 14:23:16 +04:00
perf_output_wakeup ( handle ) ;
2009-03-25 14:30:22 +03:00
out :
rcu_read_unlock ( ) ;
2009-03-23 20:22:10 +03:00
2009-03-25 14:30:22 +03:00
return - ENOSPC ;
}
2009-03-23 20:22:10 +03:00
2009-03-25 14:30:22 +03:00
static void perf_output_copy ( struct perf_output_handle * handle ,
void * buf , unsigned int len )
{
unsigned int pages_mask ;
unsigned int offset ;
unsigned int size ;
void * * pages ;
offset = handle - > offset ;
pages_mask = handle - > data - > nr_pages - 1 ;
pages = handle - > data - > data_pages ;
do {
unsigned int page_offset ;
int nr ;
nr = ( offset > > PAGE_SHIFT ) & pages_mask ;
page_offset = offset & ( PAGE_SIZE - 1 ) ;
size = min_t ( unsigned int , PAGE_SIZE - page_offset , len ) ;
memcpy ( pages [ nr ] + page_offset , buf , size ) ;
len - = size ;
buf + = size ;
offset + = size ;
} while ( len ) ;
handle - > offset = offset ;
2009-03-25 14:30:24 +03:00
2009-05-13 23:26:19 +04:00
/*
* Check we didn ' t copy past our reservation window , taking the
* possible unsigned int wrap into account .
*/
WARN_ON_ONCE ( ( ( int ) ( handle - > head - handle - > offset ) ) < 0 ) ;
2009-03-25 14:30:22 +03:00
}
2009-03-25 14:30:23 +03:00
# define perf_output_put(handle, x) \
perf_output_copy ( ( handle ) , & ( x ) , sizeof ( x ) )
2009-03-30 21:07:11 +04:00
static void perf_output_end ( struct perf_output_handle * handle )
2009-03-25 14:30:22 +03:00
{
2009-05-01 14:23:16 +04:00
struct perf_counter * counter = handle - > counter ;
struct perf_mmap_data * data = handle - > data ;
int wakeup_events = counter - > hw_event . wakeup_events ;
2009-04-02 13:12:01 +04:00
2009-04-06 13:45:09 +04:00
if ( handle - > overflow & & wakeup_events ) {
2009-05-01 14:23:16 +04:00
int events = atomic_inc_return ( & data - > events ) ;
2009-04-02 13:12:01 +04:00
if ( events > = wakeup_events ) {
2009-05-01 14:23:16 +04:00
atomic_sub ( wakeup_events , & data - > events ) ;
2009-05-05 19:50:22 +04:00
atomic_set ( & data - > wakeup , 1 ) ;
2009-04-02 13:12:01 +04:00
}
2009-05-01 14:23:16 +04:00
}
perf_output_unlock ( handle ) ;
2009-03-23 20:22:10 +03:00
rcu_read_unlock ( ) ;
2009-03-25 14:30:22 +03:00
}
2009-04-06 13:45:04 +04:00
static void perf_counter_output ( struct perf_counter * counter ,
2009-04-08 17:01:33 +04:00
int nmi , struct pt_regs * regs , u64 addr )
2009-03-23 20:22:10 +03:00
{
2009-03-30 21:07:12 +04:00
int ret ;
2009-04-02 13:11:59 +04:00
u64 record_type = counter - > hw_event . record_type ;
2009-03-30 21:07:12 +04:00
struct perf_output_handle handle ;
struct perf_event_header header ;
u64 ip ;
2009-03-25 14:30:23 +03:00
struct {
2009-03-25 14:30:25 +03:00
u32 pid , tid ;
2009-03-30 21:07:12 +04:00
} tid_entry ;
2009-04-02 13:11:59 +04:00
struct {
u64 event ;
u64 counter ;
} group_entry ;
2009-03-30 21:07:14 +04:00
struct perf_callchain_entry * callchain = NULL ;
int callchain_size = 0 ;
2009-04-06 13:45:06 +04:00
u64 time ;
2009-05-08 20:52:24 +04:00
struct {
u32 cpu , reserved ;
} cpu_entry ;
2009-03-23 20:22:10 +03:00
2009-04-08 17:01:27 +04:00
header . type = 0 ;
2009-03-30 21:07:12 +04:00
header . size = sizeof ( header ) ;
2009-03-23 20:22:10 +03:00
2009-04-08 17:01:27 +04:00
header . misc = PERF_EVENT_MISC_OVERFLOW ;
2009-05-14 15:48:08 +04:00
header . misc | = perf_misc_flags ( regs ) ;
2009-04-08 17:01:26 +04:00
2009-04-02 13:11:59 +04:00
if ( record_type & PERF_RECORD_IP ) {
2009-05-14 15:48:08 +04:00
ip = perf_instruction_pointer ( regs ) ;
2009-04-08 17:01:27 +04:00
header . type | = PERF_RECORD_IP ;
2009-04-02 13:11:59 +04:00
header . size + = sizeof ( ip ) ;
}
2009-03-25 14:30:25 +03:00
2009-04-02 13:11:59 +04:00
if ( record_type & PERF_RECORD_TID ) {
2009-03-25 14:30:25 +03:00
/* namespace issues */
2009-03-30 21:07:12 +04:00
tid_entry . pid = current - > group_leader - > pid ;
tid_entry . tid = current - > pid ;
2009-04-08 17:01:27 +04:00
header . type | = PERF_RECORD_TID ;
2009-03-30 21:07:12 +04:00
header . size + = sizeof ( tid_entry ) ;
}
2009-04-08 17:01:32 +04:00
if ( record_type & PERF_RECORD_TIME ) {
/*
* Maybe do better on x86 and provide cpu_clock_nmi ( )
*/
time = sched_clock ( ) ;
header . type | = PERF_RECORD_TIME ;
header . size + = sizeof ( u64 ) ;
}
2009-04-08 17:01:33 +04:00
if ( record_type & PERF_RECORD_ADDR ) {
header . type | = PERF_RECORD_ADDR ;
header . size + = sizeof ( u64 ) ;
}
2009-05-08 20:52:23 +04:00
if ( record_type & PERF_RECORD_CONFIG ) {
header . type | = PERF_RECORD_CONFIG ;
header . size + = sizeof ( u64 ) ;
}
2009-05-08 20:52:24 +04:00
if ( record_type & PERF_RECORD_CPU ) {
header . type | = PERF_RECORD_CPU ;
header . size + = sizeof ( cpu_entry ) ;
cpu_entry . cpu = raw_smp_processor_id ( ) ;
}
2009-04-02 13:11:59 +04:00
if ( record_type & PERF_RECORD_GROUP ) {
2009-04-08 17:01:27 +04:00
header . type | = PERF_RECORD_GROUP ;
2009-04-02 13:11:59 +04:00
header . size + = sizeof ( u64 ) +
counter - > nr_siblings * sizeof ( group_entry ) ;
}
if ( record_type & PERF_RECORD_CALLCHAIN ) {
2009-03-30 21:07:14 +04:00
callchain = perf_callchain ( regs ) ;
if ( callchain ) {
2009-04-06 13:45:00 +04:00
callchain_size = ( 1 + callchain - > nr ) * sizeof ( u64 ) ;
2009-03-30 21:07:14 +04:00
2009-04-08 17:01:27 +04:00
header . type | = PERF_RECORD_CALLCHAIN ;
2009-03-30 21:07:14 +04:00
header . size + = callchain_size ;
}
}
2009-04-06 13:45:09 +04:00
ret = perf_output_begin ( & handle , counter , header . size , nmi , 1 ) ;
2009-03-30 21:07:12 +04:00
if ( ret )
return ;
2009-03-25 14:30:25 +03:00
2009-03-30 21:07:12 +04:00
perf_output_put ( & handle , header ) ;
2009-03-25 14:30:23 +03:00
2009-04-02 13:11:59 +04:00
if ( record_type & PERF_RECORD_IP )
perf_output_put ( & handle , ip ) ;
2009-03-25 14:30:23 +03:00
2009-04-02 13:11:59 +04:00
if ( record_type & PERF_RECORD_TID )
perf_output_put ( & handle , tid_entry ) ;
2009-03-25 14:30:23 +03:00
2009-04-08 17:01:32 +04:00
if ( record_type & PERF_RECORD_TIME )
perf_output_put ( & handle , time ) ;
2009-04-08 17:01:33 +04:00
if ( record_type & PERF_RECORD_ADDR )
perf_output_put ( & handle , addr ) ;
2009-05-08 20:52:23 +04:00
if ( record_type & PERF_RECORD_CONFIG )
perf_output_put ( & handle , counter - > hw_event . config ) ;
2009-05-08 20:52:24 +04:00
if ( record_type & PERF_RECORD_CPU )
perf_output_put ( & handle , cpu_entry ) ;
2009-05-05 19:50:26 +04:00
/*
* XXX PERF_RECORD_GROUP vs inherited counters seems difficult .
*/
2009-04-02 13:11:59 +04:00
if ( record_type & PERF_RECORD_GROUP ) {
struct perf_counter * leader , * sub ;
u64 nr = counter - > nr_siblings ;
2009-03-25 14:30:23 +03:00
2009-04-02 13:11:59 +04:00
perf_output_put ( & handle , nr ) ;
2009-03-19 22:26:19 +03:00
2009-04-02 13:11:59 +04:00
leader = counter - > group_leader ;
list_for_each_entry ( sub , & leader - > sibling_list , list_entry ) {
if ( sub ! = counter )
2009-04-29 14:47:03 +04:00
sub - > pmu - > read ( sub ) ;
2009-03-23 20:22:10 +03:00
2009-04-02 13:11:59 +04:00
group_entry . event = sub - > hw_event . config ;
group_entry . counter = atomic64_read ( & sub - > count ) ;
2009-03-23 20:22:10 +03:00
2009-04-02 13:11:59 +04:00
perf_output_put ( & handle , group_entry ) ;
}
2009-03-19 22:26:19 +03:00
}
2009-03-25 14:30:23 +03:00
2009-04-02 13:11:59 +04:00
if ( callchain )
perf_output_copy ( & handle , callchain , callchain_size ) ;
2009-03-19 22:26:19 +03:00
2009-04-02 13:11:59 +04:00
perf_output_end ( & handle ) ;
2009-03-19 22:26:19 +03:00
}
2009-04-08 17:01:30 +04:00
/*
* comm tracking
*/
struct perf_comm_event {
struct task_struct * task ;
char * comm ;
int comm_size ;
struct {
struct perf_event_header header ;
u32 pid ;
u32 tid ;
} event ;
} ;
static void perf_counter_comm_output ( struct perf_counter * counter ,
struct perf_comm_event * comm_event )
{
struct perf_output_handle handle ;
int size = comm_event - > event . header . size ;
int ret = perf_output_begin ( & handle , counter , size , 0 , 0 ) ;
if ( ret )
return ;
perf_output_put ( & handle , comm_event - > event ) ;
perf_output_copy ( & handle , comm_event - > comm ,
comm_event - > comm_size ) ;
perf_output_end ( & handle ) ;
}
static int perf_counter_comm_match ( struct perf_counter * counter ,
struct perf_comm_event * comm_event )
{
if ( counter - > hw_event . comm & &
comm_event - > event . header . type = = PERF_EVENT_COMM )
return 1 ;
return 0 ;
}
static void perf_counter_comm_ctx ( struct perf_counter_context * ctx ,
struct perf_comm_event * comm_event )
{
struct perf_counter * counter ;
if ( system_state ! = SYSTEM_RUNNING | | list_empty ( & ctx - > event_list ) )
return ;
rcu_read_lock ( ) ;
list_for_each_entry_rcu ( counter , & ctx - > event_list , event_entry ) {
if ( perf_counter_comm_match ( counter , comm_event ) )
perf_counter_comm_output ( counter , comm_event ) ;
}
rcu_read_unlock ( ) ;
}
static void perf_counter_comm_event ( struct perf_comm_event * comm_event )
{
struct perf_cpu_context * cpuctx ;
unsigned int size ;
char * comm = comm_event - > task - > comm ;
2009-04-09 11:48:22 +04:00
size = ALIGN ( strlen ( comm ) + 1 , sizeof ( u64 ) ) ;
2009-04-08 17:01:30 +04:00
comm_event - > comm = comm ;
comm_event - > comm_size = size ;
comm_event - > event . header . size = sizeof ( comm_event - > event ) + size ;
cpuctx = & get_cpu_var ( perf_cpu_context ) ;
perf_counter_comm_ctx ( & cpuctx - > ctx , comm_event ) ;
put_cpu_var ( perf_cpu_context ) ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
perf_counter_comm_ctx ( current - > perf_counter_ctxp , comm_event ) ;
2009-04-08 17:01:30 +04:00
}
void perf_counter_comm ( struct task_struct * task )
{
2009-04-09 12:53:44 +04:00
struct perf_comm_event comm_event ;
if ( ! atomic_read ( & nr_comm_tracking ) )
return ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
if ( ! current - > perf_counter_ctxp )
return ;
2009-04-09 12:53:44 +04:00
comm_event = ( struct perf_comm_event ) {
2009-04-08 17:01:30 +04:00
. task = task ,
. event = {
. header = { . type = PERF_EVENT_COMM , } ,
. pid = task - > group_leader - > pid ,
. tid = task - > pid ,
} ,
} ;
perf_counter_comm_event ( & comm_event ) ;
}
2009-03-30 21:07:05 +04:00
/*
* mmap tracking
*/
struct perf_mmap_event {
struct file * file ;
char * file_name ;
int file_size ;
struct {
struct perf_event_header header ;
u32 pid ;
u32 tid ;
u64 start ;
u64 len ;
u64 pgoff ;
} event ;
} ;
static void perf_counter_mmap_output ( struct perf_counter * counter ,
struct perf_mmap_event * mmap_event )
{
struct perf_output_handle handle ;
int size = mmap_event - > event . header . size ;
2009-04-06 13:45:09 +04:00
int ret = perf_output_begin ( & handle , counter , size , 0 , 0 ) ;
2009-03-30 21:07:05 +04:00
if ( ret )
return ;
perf_output_put ( & handle , mmap_event - > event ) ;
perf_output_copy ( & handle , mmap_event - > file_name ,
mmap_event - > file_size ) ;
2009-03-30 21:07:11 +04:00
perf_output_end ( & handle ) ;
2009-03-30 21:07:05 +04:00
}
static int perf_counter_mmap_match ( struct perf_counter * counter ,
struct perf_mmap_event * mmap_event )
{
if ( counter - > hw_event . mmap & &
mmap_event - > event . header . type = = PERF_EVENT_MMAP )
return 1 ;
if ( counter - > hw_event . munmap & &
mmap_event - > event . header . type = = PERF_EVENT_MUNMAP )
return 1 ;
return 0 ;
}
static void perf_counter_mmap_ctx ( struct perf_counter_context * ctx ,
struct perf_mmap_event * mmap_event )
{
struct perf_counter * counter ;
if ( system_state ! = SYSTEM_RUNNING | | list_empty ( & ctx - > event_list ) )
return ;
rcu_read_lock ( ) ;
list_for_each_entry_rcu ( counter , & ctx - > event_list , event_entry ) {
if ( perf_counter_mmap_match ( counter , mmap_event ) )
perf_counter_mmap_output ( counter , mmap_event ) ;
}
rcu_read_unlock ( ) ;
}
static void perf_counter_mmap_event ( struct perf_mmap_event * mmap_event )
{
struct perf_cpu_context * cpuctx ;
struct file * file = mmap_event - > file ;
unsigned int size ;
char tmp [ 16 ] ;
char * buf = NULL ;
char * name ;
if ( file ) {
buf = kzalloc ( PATH_MAX , GFP_KERNEL ) ;
if ( ! buf ) {
name = strncpy ( tmp , " //enomem " , sizeof ( tmp ) ) ;
goto got_name ;
}
2009-04-09 12:53:46 +04:00
name = d_path ( & file - > f_path , buf , PATH_MAX ) ;
2009-03-30 21:07:05 +04:00
if ( IS_ERR ( name ) ) {
name = strncpy ( tmp , " //toolong " , sizeof ( tmp ) ) ;
goto got_name ;
}
} else {
name = strncpy ( tmp , " //anon " , sizeof ( tmp ) ) ;
goto got_name ;
}
got_name :
2009-04-09 11:48:22 +04:00
size = ALIGN ( strlen ( name ) + 1 , sizeof ( u64 ) ) ;
2009-03-30 21:07:05 +04:00
mmap_event - > file_name = name ;
mmap_event - > file_size = size ;
mmap_event - > event . header . size = sizeof ( mmap_event - > event ) + size ;
cpuctx = & get_cpu_var ( perf_cpu_context ) ;
perf_counter_mmap_ctx ( & cpuctx - > ctx , mmap_event ) ;
put_cpu_var ( perf_cpu_context ) ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
perf_counter_mmap_ctx ( current - > perf_counter_ctxp , mmap_event ) ;
2009-03-30 21:07:05 +04:00
kfree ( buf ) ;
}
void perf_counter_mmap ( unsigned long addr , unsigned long len ,
unsigned long pgoff , struct file * file )
{
2009-04-09 12:53:44 +04:00
struct perf_mmap_event mmap_event ;
if ( ! atomic_read ( & nr_mmap_tracking ) )
return ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
if ( ! current - > perf_counter_ctxp )
return ;
2009-04-09 12:53:44 +04:00
mmap_event = ( struct perf_mmap_event ) {
2009-03-30 21:07:05 +04:00
. file = file ,
. event = {
. header = { . type = PERF_EVENT_MMAP , } ,
. pid = current - > group_leader - > pid ,
. tid = current - > pid ,
. start = addr ,
. len = len ,
. pgoff = pgoff ,
} ,
} ;
perf_counter_mmap_event ( & mmap_event ) ;
}
void perf_counter_munmap ( unsigned long addr , unsigned long len ,
unsigned long pgoff , struct file * file )
{
2009-04-09 12:53:44 +04:00
struct perf_mmap_event mmap_event ;
if ( ! atomic_read ( & nr_munmap_tracking ) )
return ;
mmap_event = ( struct perf_mmap_event ) {
2009-03-30 21:07:05 +04:00
. file = file ,
. event = {
. header = { . type = PERF_EVENT_MUNMAP , } ,
. pid = current - > group_leader - > pid ,
. tid = current - > pid ,
. start = addr ,
. len = len ,
. pgoff = pgoff ,
} ,
} ;
perf_counter_mmap_event ( & mmap_event ) ;
}
2009-05-20 14:21:20 +04:00
/*
*
*/
static void perf_log_period ( struct perf_counter * counter , u64 period )
{
struct perf_output_handle handle ;
int ret ;
struct {
struct perf_event_header header ;
u64 time ;
u64 period ;
} freq_event = {
. header = {
. type = PERF_EVENT_PERIOD ,
. misc = 0 ,
. size = sizeof ( freq_event ) ,
} ,
. time = sched_clock ( ) ,
. period = period ,
} ;
if ( counter - > hw . irq_period = = period )
return ;
ret = perf_output_begin ( & handle , counter , sizeof ( freq_event ) , 0 , 0 ) ;
if ( ret )
return ;
perf_output_put ( & handle , freq_event ) ;
perf_output_end ( & handle ) ;
}
2009-04-06 13:45:04 +04:00
/*
* Generic counter overflow handling .
*/
int perf_counter_overflow ( struct perf_counter * counter ,
2009-04-08 17:01:33 +04:00
int nmi , struct pt_regs * regs , u64 addr )
2009-04-06 13:45:04 +04:00
{
2009-04-06 13:45:07 +04:00
int events = atomic_read ( & counter - > event_limit ) ;
int ret = 0 ;
2009-05-15 17:19:28 +04:00
counter - > hw . interrupts + + ;
2009-05-05 19:50:26 +04:00
/*
* XXX event_limit might not quite work as expected on inherited
* counters
*/
2009-04-06 13:45:09 +04:00
counter - > pending_kill = POLL_IN ;
2009-04-06 13:45:07 +04:00
if ( events & & atomic_dec_and_test ( & counter - > event_limit ) ) {
ret = 1 ;
2009-04-06 13:45:09 +04:00
counter - > pending_kill = POLL_HUP ;
2009-04-06 13:45:07 +04:00
if ( nmi ) {
counter - > pending_disable = 1 ;
perf_pending_queue ( & counter - > pending ,
perf_pending_counter ) ;
} else
perf_counter_disable ( counter ) ;
}
2009-04-08 17:01:33 +04:00
perf_counter_output ( counter , nmi , regs , addr ) ;
2009-04-06 13:45:07 +04:00
return ret ;
2009-04-06 13:45:04 +04:00
}
2009-03-13 14:21:32 +03:00
/*
* Generic software counter infrastructure
*/
static void perf_swcounter_update ( struct perf_counter * counter )
{
struct hw_perf_counter * hwc = & counter - > hw ;
u64 prev , now ;
s64 delta ;
again :
prev = atomic64_read ( & hwc - > prev_count ) ;
now = atomic64_read ( & hwc - > count ) ;
if ( atomic64_cmpxchg ( & hwc - > prev_count , prev , now ) ! = prev )
goto again ;
delta = now - prev ;
atomic64_add ( delta , & counter - > count ) ;
atomic64_sub ( delta , & hwc - > period_left ) ;
}
static void perf_swcounter_set_period ( struct perf_counter * counter )
{
struct hw_perf_counter * hwc = & counter - > hw ;
s64 left = atomic64_read ( & hwc - > period_left ) ;
s64 period = hwc - > irq_period ;
if ( unlikely ( left < = - period ) ) {
left = period ;
atomic64_set ( & hwc - > period_left , left ) ;
}
if ( unlikely ( left < = 0 ) ) {
left + = period ;
atomic64_add ( period , & hwc - > period_left ) ;
}
atomic64_set ( & hwc - > prev_count , - left ) ;
atomic64_set ( & hwc - > count , - left ) ;
}
2009-03-13 14:21:35 +03:00
static enum hrtimer_restart perf_swcounter_hrtimer ( struct hrtimer * hrtimer )
{
2009-04-06 13:45:04 +04:00
enum hrtimer_restart ret = HRTIMER_RESTART ;
2009-03-13 14:21:35 +03:00
struct perf_counter * counter ;
struct pt_regs * regs ;
2009-05-15 17:19:28 +04:00
u64 period ;
2009-03-13 14:21:35 +03:00
counter = container_of ( hrtimer , struct perf_counter , hw . hrtimer ) ;
2009-04-29 14:47:03 +04:00
counter - > pmu - > read ( counter ) ;
2009-03-13 14:21:35 +03:00
regs = get_irq_regs ( ) ;
/*
* In case we exclude kernel IPs or are somehow not in interrupt
* context , provide the next best thing , the user IP .
*/
if ( ( counter - > hw_event . exclude_kernel | | ! regs ) & &
! counter - > hw_event . exclude_user )
regs = task_pt_regs ( current ) ;
2009-04-06 13:45:04 +04:00
if ( regs ) {
2009-04-08 17:01:33 +04:00
if ( perf_counter_overflow ( counter , 0 , regs , 0 ) )
2009-04-06 13:45:04 +04:00
ret = HRTIMER_NORESTART ;
}
2009-03-13 14:21:35 +03:00
2009-05-15 17:19:28 +04:00
period = max_t ( u64 , 10000 , counter - > hw . irq_period ) ;
hrtimer_forward_now ( hrtimer , ns_to_ktime ( period ) ) ;
2009-03-13 14:21:35 +03:00
2009-04-06 13:45:04 +04:00
return ret ;
2009-03-13 14:21:35 +03:00
}
static void perf_swcounter_overflow ( struct perf_counter * counter ,
2009-04-08 17:01:33 +04:00
int nmi , struct pt_regs * regs , u64 addr )
2009-03-13 14:21:35 +03:00
{
2009-03-19 22:26:18 +03:00
perf_swcounter_update ( counter ) ;
perf_swcounter_set_period ( counter ) ;
2009-04-08 17:01:33 +04:00
if ( perf_counter_overflow ( counter , nmi , regs , addr ) )
2009-04-06 13:45:04 +04:00
/* soft-disable the counter */
;
2009-03-13 14:21:35 +03:00
}
2009-03-13 14:21:32 +03:00
static int perf_swcounter_match ( struct perf_counter * counter ,
2009-03-19 22:26:18 +03:00
enum perf_event_types type ,
u32 event , struct pt_regs * regs )
2009-03-13 14:21:32 +03:00
{
if ( counter - > state ! = PERF_COUNTER_STATE_ACTIVE )
return 0 ;
2009-03-23 20:22:06 +03:00
if ( perf_event_raw ( & counter - > hw_event ) )
2009-03-19 22:26:18 +03:00
return 0 ;
2009-03-23 20:22:06 +03:00
if ( perf_event_type ( & counter - > hw_event ) ! = type )
2009-03-13 14:21:32 +03:00
return 0 ;
2009-03-23 20:22:06 +03:00
if ( perf_event_id ( & counter - > hw_event ) ! = event )
2009-03-13 14:21:32 +03:00
return 0 ;
if ( counter - > hw_event . exclude_user & & user_mode ( regs ) )
return 0 ;
if ( counter - > hw_event . exclude_kernel & & ! user_mode ( regs ) )
return 0 ;
return 1 ;
}
2009-03-13 14:21:35 +03:00
static void perf_swcounter_add ( struct perf_counter * counter , u64 nr ,
2009-04-08 17:01:33 +04:00
int nmi , struct pt_regs * regs , u64 addr )
2009-03-13 14:21:35 +03:00
{
int neg = atomic64_add_negative ( nr , & counter - > hw . count ) ;
if ( counter - > hw . irq_period & & ! neg )
2009-04-08 17:01:33 +04:00
perf_swcounter_overflow ( counter , nmi , regs , addr ) ;
2009-03-13 14:21:35 +03:00
}
2009-03-13 14:21:32 +03:00
static void perf_swcounter_ctx_event ( struct perf_counter_context * ctx ,
2009-03-19 22:26:18 +03:00
enum perf_event_types type , u32 event ,
2009-04-08 17:01:33 +04:00
u64 nr , int nmi , struct pt_regs * regs ,
u64 addr )
2009-03-13 14:21:32 +03:00
{
struct perf_counter * counter ;
2009-03-19 22:26:11 +03:00
if ( system_state ! = SYSTEM_RUNNING | | list_empty ( & ctx - > event_list ) )
2009-03-13 14:21:32 +03:00
return ;
2009-03-13 14:21:36 +03:00
rcu_read_lock ( ) ;
list_for_each_entry_rcu ( counter , & ctx - > event_list , event_entry ) {
2009-03-19 22:26:18 +03:00
if ( perf_swcounter_match ( counter , type , event , regs ) )
2009-04-08 17:01:33 +04:00
perf_swcounter_add ( counter , nr , nmi , regs , addr ) ;
2009-03-13 14:21:32 +03:00
}
2009-03-13 14:21:36 +03:00
rcu_read_unlock ( ) ;
2009-03-13 14:21:32 +03:00
}
2009-03-23 20:22:07 +03:00
static int * perf_swcounter_recursion_context ( struct perf_cpu_context * cpuctx )
{
if ( in_nmi ( ) )
return & cpuctx - > recursion [ 3 ] ;
if ( in_irq ( ) )
return & cpuctx - > recursion [ 2 ] ;
if ( in_softirq ( ) )
return & cpuctx - > recursion [ 1 ] ;
return & cpuctx - > recursion [ 0 ] ;
}
2009-03-19 22:26:18 +03:00
static void __perf_swcounter_event ( enum perf_event_types type , u32 event ,
2009-04-08 17:01:33 +04:00
u64 nr , int nmi , struct pt_regs * regs ,
u64 addr )
2009-03-13 14:21:32 +03:00
{
struct perf_cpu_context * cpuctx = & get_cpu_var ( perf_cpu_context ) ;
2009-03-23 20:22:07 +03:00
int * recursion = perf_swcounter_recursion_context ( cpuctx ) ;
if ( * recursion )
goto out ;
( * recursion ) + + ;
barrier ( ) ;
2009-03-13 14:21:32 +03:00
2009-04-08 17:01:33 +04:00
perf_swcounter_ctx_event ( & cpuctx - > ctx , type , event ,
nr , nmi , regs , addr ) ;
2009-03-19 22:26:18 +03:00
if ( cpuctx - > task_ctx ) {
perf_swcounter_ctx_event ( cpuctx - > task_ctx , type , event ,
2009-04-08 17:01:33 +04:00
nr , nmi , regs , addr ) ;
2009-03-19 22:26:18 +03:00
}
2009-03-13 14:21:32 +03:00
2009-03-23 20:22:07 +03:00
barrier ( ) ;
( * recursion ) - - ;
out :
2009-03-13 14:21:32 +03:00
put_cpu_var ( perf_cpu_context ) ;
}
2009-04-08 17:01:33 +04:00
void
perf_swcounter_event ( u32 event , u64 nr , int nmi , struct pt_regs * regs , u64 addr )
2009-03-19 22:26:18 +03:00
{
2009-04-08 17:01:33 +04:00
__perf_swcounter_event ( PERF_TYPE_SOFTWARE , event , nr , nmi , regs , addr ) ;
2009-03-19 22:26:18 +03:00
}
2009-03-13 14:21:32 +03:00
static void perf_swcounter_read ( struct perf_counter * counter )
{
perf_swcounter_update ( counter ) ;
}
static int perf_swcounter_enable ( struct perf_counter * counter )
{
perf_swcounter_set_period ( counter ) ;
return 0 ;
}
static void perf_swcounter_disable ( struct perf_counter * counter )
{
perf_swcounter_update ( counter ) ;
}
2009-04-29 14:47:03 +04:00
static const struct pmu perf_ops_generic = {
2009-03-13 14:21:34 +03:00
. enable = perf_swcounter_enable ,
. disable = perf_swcounter_disable ,
. read = perf_swcounter_read ,
} ;
2009-03-13 14:21:32 +03:00
/*
* Software counter : cpu wall time clock
*/
2009-01-09 08:26:43 +03:00
static void cpu_clock_perf_counter_update ( struct perf_counter * counter )
{
int cpu = raw_smp_processor_id ( ) ;
s64 prev ;
u64 now ;
now = cpu_clock ( cpu ) ;
prev = atomic64_read ( & counter - > hw . prev_count ) ;
atomic64_set ( & counter - > hw . prev_count , now ) ;
atomic64_add ( now - prev , & counter - > count ) ;
}
2009-03-13 14:21:35 +03:00
static int cpu_clock_perf_counter_enable ( struct perf_counter * counter )
{
struct hw_perf_counter * hwc = & counter - > hw ;
int cpu = raw_smp_processor_id ( ) ;
atomic64_set ( & hwc - > prev_count , cpu_clock ( cpu ) ) ;
2009-03-13 18:43:47 +03:00
hrtimer_init ( & hwc - > hrtimer , CLOCK_MONOTONIC , HRTIMER_MODE_REL ) ;
hwc - > hrtimer . function = perf_swcounter_hrtimer ;
2009-03-13 14:21:35 +03:00
if ( hwc - > irq_period ) {
2009-05-15 17:19:28 +04:00
u64 period = max_t ( u64 , 10000 , hwc - > irq_period ) ;
2009-03-13 14:21:35 +03:00
__hrtimer_start_range_ns ( & hwc - > hrtimer ,
2009-05-15 17:19:28 +04:00
ns_to_ktime ( period ) , 0 ,
2009-03-13 14:21:35 +03:00
HRTIMER_MODE_REL , 0 ) ;
}
return 0 ;
}
2008-12-11 15:21:10 +03:00
static void cpu_clock_perf_counter_disable ( struct perf_counter * counter )
{
2009-05-20 14:21:21 +04:00
if ( counter - > hw . irq_period )
hrtimer_cancel ( & counter - > hw . hrtimer ) ;
2009-01-09 08:26:43 +03:00
cpu_clock_perf_counter_update ( counter ) ;
2008-12-11 15:21:10 +03:00
}
static void cpu_clock_perf_counter_read ( struct perf_counter * counter )
{
2009-01-09 08:26:43 +03:00
cpu_clock_perf_counter_update ( counter ) ;
2008-12-11 15:21:10 +03:00
}
2009-04-29 14:47:03 +04:00
static const struct pmu perf_ops_cpu_clock = {
2008-12-17 16:20:28 +03:00
. enable = cpu_clock_perf_counter_enable ,
. disable = cpu_clock_perf_counter_disable ,
. read = cpu_clock_perf_counter_read ,
2008-12-11 15:21:10 +03:00
} ;
2009-03-13 14:21:32 +03:00
/*
* Software counter : task time clock
*/
2009-04-08 17:01:25 +04:00
static void task_clock_perf_counter_update ( struct perf_counter * counter , u64 now )
2008-12-17 16:10:57 +03:00
{
2009-04-08 17:01:25 +04:00
u64 prev ;
2008-12-14 14:22:31 +03:00
s64 delta ;
2009-04-06 13:45:11 +04:00
prev = atomic64_xchg ( & counter - > hw . prev_count , now ) ;
2008-12-14 14:22:31 +03:00
delta = now - prev ;
atomic64_add ( delta , & counter - > count ) ;
2008-12-11 16:03:20 +03:00
}
2008-12-21 15:50:42 +03:00
static int task_clock_perf_counter_enable ( struct perf_counter * counter )
2008-12-14 14:22:31 +03:00
{
2009-03-13 14:21:35 +03:00
struct hw_perf_counter * hwc = & counter - > hw ;
2009-04-06 13:45:11 +04:00
u64 now ;
now = counter - > ctx - > time ;
2009-03-13 14:21:35 +03:00
2009-04-06 13:45:11 +04:00
atomic64_set ( & hwc - > prev_count , now ) ;
2009-03-13 18:43:47 +03:00
hrtimer_init ( & hwc - > hrtimer , CLOCK_MONOTONIC , HRTIMER_MODE_REL ) ;
hwc - > hrtimer . function = perf_swcounter_hrtimer ;
2009-03-13 14:21:35 +03:00
if ( hwc - > irq_period ) {
2009-05-15 17:19:28 +04:00
u64 period = max_t ( u64 , 10000 , hwc - > irq_period ) ;
2009-03-13 14:21:35 +03:00
__hrtimer_start_range_ns ( & hwc - > hrtimer ,
2009-05-15 17:19:28 +04:00
ns_to_ktime ( period ) , 0 ,
2009-03-13 14:21:35 +03:00
HRTIMER_MODE_REL , 0 ) ;
}
2008-12-21 15:50:42 +03:00
return 0 ;
2008-12-14 14:22:31 +03:00
}
static void task_clock_perf_counter_disable ( struct perf_counter * counter )
2008-12-11 16:03:20 +03:00
{
2009-05-20 14:21:21 +04:00
if ( counter - > hw . irq_period )
hrtimer_cancel ( & counter - > hw . hrtimer ) ;
2009-04-08 17:01:25 +04:00
task_clock_perf_counter_update ( counter , counter - > ctx - > time ) ;
2009-03-13 14:21:35 +03:00
}
2008-12-17 16:10:57 +03:00
2009-03-13 14:21:35 +03:00
static void task_clock_perf_counter_read ( struct perf_counter * counter )
{
2009-04-08 17:01:25 +04:00
u64 time ;
if ( ! in_nmi ( ) ) {
update_context_time ( counter - > ctx ) ;
time = counter - > ctx - > time ;
} else {
u64 now = perf_clock ( ) ;
u64 delta = now - counter - > ctx - > timestamp ;
time = counter - > ctx - > time + delta ;
}
task_clock_perf_counter_update ( counter , time ) ;
2008-12-11 16:03:20 +03:00
}
2009-04-29 14:47:03 +04:00
static const struct pmu perf_ops_task_clock = {
2008-12-17 16:20:28 +03:00
. enable = task_clock_perf_counter_enable ,
. disable = task_clock_perf_counter_disable ,
. read = task_clock_perf_counter_read ,
2008-12-11 16:03:20 +03:00
} ;
2009-03-13 14:21:32 +03:00
/*
* Software counter : cpu migrations
*/
perf_counters: make software counters work as per-cpu counters
Impact: kernel crash fix
Yanmin Zhang reported that using a PERF_COUNT_TASK_CLOCK software
counter as a per-cpu counter would reliably crash the system, because
it calls __task_delta_exec with a null pointer. The page fault,
context switch and cpu migration counters also won't function
correctly as per-cpu counters since they reference the current task.
This fixes the problem by redirecting the task_clock counter to the
cpu_clock counter when used as a per-cpu counter, and by implementing
per-cpu page fault, context switch and cpu migration counters.
Along the way, this:
- Initializes counter->ctx earlier, in perf_counter_alloc, so that
sw_perf_counter_init can use it
- Adds code to kernel/sched.c to count task migrations into each
cpu, in rq->nr_migrations_in
- Exports the per-cpu context switch and task migration counts
via new functions added to kernel/sched.c
- Makes sure that if sw_perf_counter_init fails, we don't try to
initialize the counter as a hardware counter. Since the user has
passed a negative, non-raw event type, they clearly don't intend
for it to be interpreted as a hardware event.
Reported-by: "Zhang Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 14:42:47 +03:00
static inline u64 get_cpu_migrations ( struct perf_counter * counter )
2008-12-14 14:34:15 +03:00
{
perf_counters: make software counters work as per-cpu counters
Impact: kernel crash fix
Yanmin Zhang reported that using a PERF_COUNT_TASK_CLOCK software
counter as a per-cpu counter would reliably crash the system, because
it calls __task_delta_exec with a null pointer. The page fault,
context switch and cpu migration counters also won't function
correctly as per-cpu counters since they reference the current task.
This fixes the problem by redirecting the task_clock counter to the
cpu_clock counter when used as a per-cpu counter, and by implementing
per-cpu page fault, context switch and cpu migration counters.
Along the way, this:
- Initializes counter->ctx earlier, in perf_counter_alloc, so that
sw_perf_counter_init can use it
- Adds code to kernel/sched.c to count task migrations into each
cpu, in rq->nr_migrations_in
- Exports the per-cpu context switch and task migration counts
via new functions added to kernel/sched.c
- Makes sure that if sw_perf_counter_init fails, we don't try to
initialize the counter as a hardware counter. Since the user has
passed a negative, non-raw event type, they clearly don't intend
for it to be interpreted as a hardware event.
Reported-by: "Zhang Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 14:42:47 +03:00
struct task_struct * curr = counter - > ctx - > task ;
if ( curr )
return curr - > se . nr_migrations ;
return cpu_nr_migrations ( smp_processor_id ( ) ) ;
2008-12-14 14:34:15 +03:00
}
static void cpu_migrations_perf_counter_update ( struct perf_counter * counter )
{
u64 prev , now ;
s64 delta ;
prev = atomic64_read ( & counter - > hw . prev_count ) ;
perf_counters: make software counters work as per-cpu counters
Impact: kernel crash fix
Yanmin Zhang reported that using a PERF_COUNT_TASK_CLOCK software
counter as a per-cpu counter would reliably crash the system, because
it calls __task_delta_exec with a null pointer. The page fault,
context switch and cpu migration counters also won't function
correctly as per-cpu counters since they reference the current task.
This fixes the problem by redirecting the task_clock counter to the
cpu_clock counter when used as a per-cpu counter, and by implementing
per-cpu page fault, context switch and cpu migration counters.
Along the way, this:
- Initializes counter->ctx earlier, in perf_counter_alloc, so that
sw_perf_counter_init can use it
- Adds code to kernel/sched.c to count task migrations into each
cpu, in rq->nr_migrations_in
- Exports the per-cpu context switch and task migration counts
via new functions added to kernel/sched.c
- Makes sure that if sw_perf_counter_init fails, we don't try to
initialize the counter as a hardware counter. Since the user has
passed a negative, non-raw event type, they clearly don't intend
for it to be interpreted as a hardware event.
Reported-by: "Zhang Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 14:42:47 +03:00
now = get_cpu_migrations ( counter ) ;
2008-12-14 14:34:15 +03:00
atomic64_set ( & counter - > hw . prev_count , now ) ;
delta = now - prev ;
atomic64_add ( delta , & counter - > count ) ;
}
static void cpu_migrations_perf_counter_read ( struct perf_counter * counter )
{
cpu_migrations_perf_counter_update ( counter ) ;
}
2008-12-21 15:50:42 +03:00
static int cpu_migrations_perf_counter_enable ( struct perf_counter * counter )
2008-12-14 14:34:15 +03:00
{
perfcounters: make context switch and migration software counters work again
Jaswinder Singh Rajput reported that commit 23a185ca8abbeef caused the
context switch and migration software counters to report zero always.
With that commit, the software counters only count events that occur
between sched-in and sched-out for a task. This is necessary for the
counter enable/disable prctls and ioctls to work. However, the
context switch and migration counts are incremented after sched-out
for one task and before sched-in for the next. Since the increment
doesn't occur while a task is scheduled in (as far as the software
counters are concerned) it doesn't count towards any counter.
Thus the context switch and migration counters need to count events
that occur at any time, provided the counter is enabled, not just
those that occur while the task is scheduled in (from the perf_counter
subsystem's point of view). The problem though is that the software
counter code can't tell the difference between being enabled and being
scheduled in, and between being disabled and being scheduled out,
since we use the one pair of enable/disable entry points for both.
That is, the high-level disable operation simply arranges for the
counter to not be scheduled in any more, and the high-level enable
operation arranges for it to be scheduled in again.
One way to solve this would be to have sched_in/out operations in the
hw_perf_counter_ops struct as well as enable/disable. However, this
takes a simpler approach: it adds a 'prev_state' field to the
perf_counter struct that allows a counter's enable method to know
whether the counter was previously disabled or just inactive
(scheduled out), and therefore whether the enable method is being
called as a result of a high-level enable or a schedule-in operation.
This then allows the context switch, migration and page fault counters
to reset their hw.prev_count value in their enable functions only if
they are called as a result of a high-level enable operation.
Although page faults would normally only occur while the counter is
scheduled in, this changes the page fault counter code too in case
there are ever circumstances where page faults get counted against a
task while its counters are not scheduled in.
Reported-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13 14:10:34 +03:00
if ( counter - > prev_state < = PERF_COUNTER_STATE_OFF )
atomic64_set ( & counter - > hw . prev_count ,
get_cpu_migrations ( counter ) ) ;
2008-12-21 15:50:42 +03:00
return 0 ;
2008-12-14 14:34:15 +03:00
}
static void cpu_migrations_perf_counter_disable ( struct perf_counter * counter )
{
cpu_migrations_perf_counter_update ( counter ) ;
}
2009-04-29 14:47:03 +04:00
static const struct pmu perf_ops_cpu_migrations = {
2008-12-17 16:20:28 +03:00
. enable = cpu_migrations_perf_counter_enable ,
. disable = cpu_migrations_perf_counter_disable ,
. read = cpu_migrations_perf_counter_read ,
2008-12-14 14:34:15 +03:00
} ;
2009-03-19 22:26:17 +03:00
# ifdef CONFIG_EVENT_PROFILE
void perf_tpcounter_event ( int event_id )
{
2009-03-19 22:26:18 +03:00
struct pt_regs * regs = get_irq_regs ( ) ;
if ( ! regs )
regs = task_pt_regs ( current ) ;
2009-04-08 17:01:33 +04:00
__perf_swcounter_event ( PERF_TYPE_TRACEPOINT , event_id , 1 , 1 , regs , 0 ) ;
2009-03-19 22:26:17 +03:00
}
2009-04-15 19:55:05 +04:00
EXPORT_SYMBOL_GPL ( perf_tpcounter_event ) ;
2009-03-19 22:26:17 +03:00
extern int ftrace_profile_enable ( int ) ;
extern void ftrace_profile_disable ( int ) ;
static void tp_perf_counter_destroy ( struct perf_counter * counter )
{
2009-03-23 20:22:06 +03:00
ftrace_profile_disable ( perf_event_id ( & counter - > hw_event ) ) ;
2009-03-19 22:26:17 +03:00
}
2009-04-29 14:47:03 +04:00
static const struct pmu * tp_perf_counter_init ( struct perf_counter * counter )
2009-03-19 22:26:17 +03:00
{
2009-03-23 20:22:06 +03:00
int event_id = perf_event_id ( & counter - > hw_event ) ;
2009-03-19 22:26:17 +03:00
int ret ;
ret = ftrace_profile_enable ( event_id ) ;
if ( ret )
return NULL ;
counter - > destroy = tp_perf_counter_destroy ;
2009-03-19 22:26:18 +03:00
counter - > hw . irq_period = counter - > hw_event . irq_period ;
2009-03-19 22:26:17 +03:00
return & perf_ops_generic ;
}
# else
2009-04-29 14:47:03 +04:00
static const struct pmu * tp_perf_counter_init ( struct perf_counter * counter )
2009-03-19 22:26:17 +03:00
{
return NULL ;
}
# endif
2009-04-29 14:47:03 +04:00
static const struct pmu * sw_perf_counter_init ( struct perf_counter * counter )
2008-12-11 15:21:10 +03:00
{
2009-04-29 14:47:03 +04:00
const struct pmu * pmu = NULL ;
2008-12-11 15:21:10 +03:00
perf_counters: allow users to count user, kernel and/or hypervisor events
Impact: new perf_counter feature
This extends the perf_counter_hw_event struct with bits that specify
that events in user, kernel and/or hypervisor mode should not be
counted (i.e. should be excluded), and adds code to program the PMU
mode selection bits accordingly on x86 and powerpc.
For software counters, we don't currently have the infrastructure to
distinguish which mode an event occurs in, so we currently fail the
counter initialization if the setting of the hw_event.exclude_* bits
would require us to distinguish. Context switches and CPU migrations
are currently considered to occur in kernel mode.
On x86, this changes the previous policy that only root can count
kernel events. Now non-root users can count kernel events or exclude
them. Non-root users still can't use NMI events, though. On x86 we
don't appear to have any way to control whether hypervisor events are
counted or not, so hw_event.exclude_hv is ignored.
On powerpc, the selection of whether to count events in user, kernel
and/or hypervisor mode is PMU-wide, not per-counter, so this adds a
check that the hw_event.exclude_* settings are the same as other events
on the PMU. Counters being added to a group have to have the same
settings as the other hardware counters in the group. Counters and
groups can only be enabled in hw_perf_group_sched_in or power_perf_enable
if they have the same settings as any other counters already on the
PMU. If we are not running on a hypervisor, the exclude_hv setting
is ignored (by forcing it to 0) since we can't ever get any
hypervisor events.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-02-11 06:35:35 +03:00
/*
* Software counters ( currently ) can ' t in general distinguish
* between user , kernel and hypervisor events .
* However , context switches and cpu migrations are considered
* to be kernel events , and page faults are never hypervisor
* events .
*/
2009-03-23 20:22:06 +03:00
switch ( perf_event_id ( & counter - > hw_event ) ) {
2008-12-11 15:21:10 +03:00
case PERF_COUNT_CPU_CLOCK :
2009-04-29 14:47:03 +04:00
pmu = & perf_ops_cpu_clock ;
2009-03-13 14:21:35 +03:00
2008-12-11 15:21:10 +03:00
break ;
2008-12-11 16:03:20 +03:00
case PERF_COUNT_TASK_CLOCK :
perf_counters: make software counters work as per-cpu counters
Impact: kernel crash fix
Yanmin Zhang reported that using a PERF_COUNT_TASK_CLOCK software
counter as a per-cpu counter would reliably crash the system, because
it calls __task_delta_exec with a null pointer. The page fault,
context switch and cpu migration counters also won't function
correctly as per-cpu counters since they reference the current task.
This fixes the problem by redirecting the task_clock counter to the
cpu_clock counter when used as a per-cpu counter, and by implementing
per-cpu page fault, context switch and cpu migration counters.
Along the way, this:
- Initializes counter->ctx earlier, in perf_counter_alloc, so that
sw_perf_counter_init can use it
- Adds code to kernel/sched.c to count task migrations into each
cpu, in rq->nr_migrations_in
- Exports the per-cpu context switch and task migration counts
via new functions added to kernel/sched.c
- Makes sure that if sw_perf_counter_init fails, we don't try to
initialize the counter as a hardware counter. Since the user has
passed a negative, non-raw event type, they clearly don't intend
for it to be interpreted as a hardware event.
Reported-by: "Zhang Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 14:42:47 +03:00
/*
* If the user instantiates this as a per - cpu counter ,
* use the cpu_clock counter instead .
*/
if ( counter - > ctx - > task )
2009-04-29 14:47:03 +04:00
pmu = & perf_ops_task_clock ;
perf_counters: make software counters work as per-cpu counters
Impact: kernel crash fix
Yanmin Zhang reported that using a PERF_COUNT_TASK_CLOCK software
counter as a per-cpu counter would reliably crash the system, because
it calls __task_delta_exec with a null pointer. The page fault,
context switch and cpu migration counters also won't function
correctly as per-cpu counters since they reference the current task.
This fixes the problem by redirecting the task_clock counter to the
cpu_clock counter when used as a per-cpu counter, and by implementing
per-cpu page fault, context switch and cpu migration counters.
Along the way, this:
- Initializes counter->ctx earlier, in perf_counter_alloc, so that
sw_perf_counter_init can use it
- Adds code to kernel/sched.c to count task migrations into each
cpu, in rq->nr_migrations_in
- Exports the per-cpu context switch and task migration counts
via new functions added to kernel/sched.c
- Makes sure that if sw_perf_counter_init fails, we don't try to
initialize the counter as a hardware counter. Since the user has
passed a negative, non-raw event type, they clearly don't intend
for it to be interpreted as a hardware event.
Reported-by: "Zhang Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 14:42:47 +03:00
else
2009-04-29 14:47:03 +04:00
pmu = & perf_ops_cpu_clock ;
2009-03-13 14:21:35 +03:00
2008-12-11 16:03:20 +03:00
break ;
2008-12-14 16:44:31 +03:00
case PERF_COUNT_PAGE_FAULTS :
2009-03-13 14:21:34 +03:00
case PERF_COUNT_PAGE_FAULTS_MIN :
case PERF_COUNT_PAGE_FAULTS_MAJ :
2008-12-14 14:28:33 +03:00
case PERF_COUNT_CONTEXT_SWITCHES :
2009-04-29 14:47:03 +04:00
pmu = & perf_ops_generic ;
2008-12-14 14:28:33 +03:00
break ;
2008-12-14 14:34:15 +03:00
case PERF_COUNT_CPU_MIGRATIONS :
perf_counters: allow users to count user, kernel and/or hypervisor events
Impact: new perf_counter feature
This extends the perf_counter_hw_event struct with bits that specify
that events in user, kernel and/or hypervisor mode should not be
counted (i.e. should be excluded), and adds code to program the PMU
mode selection bits accordingly on x86 and powerpc.
For software counters, we don't currently have the infrastructure to
distinguish which mode an event occurs in, so we currently fail the
counter initialization if the setting of the hw_event.exclude_* bits
would require us to distinguish. Context switches and CPU migrations
are currently considered to occur in kernel mode.
On x86, this changes the previous policy that only root can count
kernel events. Now non-root users can count kernel events or exclude
them. Non-root users still can't use NMI events, though. On x86 we
don't appear to have any way to control whether hypervisor events are
counted or not, so hw_event.exclude_hv is ignored.
On powerpc, the selection of whether to count events in user, kernel
and/or hypervisor mode is PMU-wide, not per-counter, so this adds a
check that the hw_event.exclude_* settings are the same as other events
on the PMU. Counters being added to a group have to have the same
settings as the other hardware counters in the group. Counters and
groups can only be enabled in hw_perf_group_sched_in or power_perf_enable
if they have the same settings as any other counters already on the
PMU. If we are not running on a hypervisor, the exclude_hv setting
is ignored (by forcing it to 0) since we can't ever get any
hypervisor events.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-02-11 06:35:35 +03:00
if ( ! counter - > hw_event . exclude_kernel )
2009-04-29 14:47:03 +04:00
pmu = & perf_ops_cpu_migrations ;
2008-12-14 14:34:15 +03:00
break ;
2008-12-11 15:21:10 +03:00
}
2009-03-13 14:21:32 +03:00
2009-04-29 14:47:03 +04:00
return pmu ;
2008-12-11 15:21:10 +03:00
}
2008-12-04 22:12:29 +03:00
/*
* Allocate and initialize a counter structure
*/
static struct perf_counter *
2008-12-11 10:38:42 +03:00
perf_counter_alloc ( struct perf_counter_hw_event * hw_event ,
int cpu ,
perf_counters: make software counters work as per-cpu counters
Impact: kernel crash fix
Yanmin Zhang reported that using a PERF_COUNT_TASK_CLOCK software
counter as a per-cpu counter would reliably crash the system, because
it calls __task_delta_exec with a null pointer. The page fault,
context switch and cpu migration counters also won't function
correctly as per-cpu counters since they reference the current task.
This fixes the problem by redirecting the task_clock counter to the
cpu_clock counter when used as a per-cpu counter, and by implementing
per-cpu page fault, context switch and cpu migration counters.
Along the way, this:
- Initializes counter->ctx earlier, in perf_counter_alloc, so that
sw_perf_counter_init can use it
- Adds code to kernel/sched.c to count task migrations into each
cpu, in rq->nr_migrations_in
- Exports the per-cpu context switch and task migration counts
via new functions added to kernel/sched.c
- Makes sure that if sw_perf_counter_init fails, we don't try to
initialize the counter as a hardware counter. Since the user has
passed a negative, non-raw event type, they clearly don't intend
for it to be interpreted as a hardware event.
Reported-by: "Zhang Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 14:42:47 +03:00
struct perf_counter_context * ctx ,
2008-12-12 15:49:45 +03:00
struct perf_counter * group_leader ,
gfp_t gfpflags )
2008-12-04 22:12:29 +03:00
{
2009-04-29 14:47:03 +04:00
const struct pmu * pmu ;
2008-12-11 14:46:46 +03:00
struct perf_counter * counter ;
2009-05-15 17:19:28 +04:00
struct hw_perf_counter * hwc ;
perf_counter: make it possible for hw_perf_counter_init to return error codes
Impact: better error reporting
At present, if hw_perf_counter_init encounters an error, all it can do
is return NULL, which causes sys_perf_counter_open to return an EINVAL
error to userspace. This isn't very informative for userspace; it means
that userspace can't tell the difference between "sorry, oprofile is
already using the PMU" and "we don't support this CPU" and "this CPU
doesn't support the requested generic hardware event".
This commit uses the PTR_ERR/ERR_PTR/IS_ERR set of macros to let
hw_perf_counter_init return an error code on error rather than just NULL
if it wishes. If it does so, that error code will be returned from
sys_perf_counter_open to userspace. If it returns NULL, an EINVAL
error will be returned to userspace, as before.
This also adapts the powerpc hw_perf_counter_init to make use of this
to return ENXIO, EINVAL, EBUSY, or EOPNOTSUPP as appropriate. It would
be good to add extra error numbers in future to allow userspace to
distinguish the various errors that are currently reported as EINVAL,
i.e. irq_period < 0, too many events in a group, conflict between
exclude_* settings in a group, and PMU resource conflict in a group.
[ v2: fix a bug pointed out by Corey Ashford where error returns from
hw_perf_counter_init were not handled correctly in the case of
raw hardware events.]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090330171023.682428180@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-30 21:07:08 +04:00
long err ;
2008-12-04 22:12:29 +03:00
2008-12-12 15:49:45 +03:00
counter = kzalloc ( sizeof ( * counter ) , gfpflags ) ;
2008-12-04 22:12:29 +03:00
if ( ! counter )
perf_counter: make it possible for hw_perf_counter_init to return error codes
Impact: better error reporting
At present, if hw_perf_counter_init encounters an error, all it can do
is return NULL, which causes sys_perf_counter_open to return an EINVAL
error to userspace. This isn't very informative for userspace; it means
that userspace can't tell the difference between "sorry, oprofile is
already using the PMU" and "we don't support this CPU" and "this CPU
doesn't support the requested generic hardware event".
This commit uses the PTR_ERR/ERR_PTR/IS_ERR set of macros to let
hw_perf_counter_init return an error code on error rather than just NULL
if it wishes. If it does so, that error code will be returned from
sys_perf_counter_open to userspace. If it returns NULL, an EINVAL
error will be returned to userspace, as before.
This also adapts the powerpc hw_perf_counter_init to make use of this
to return ENXIO, EINVAL, EBUSY, or EOPNOTSUPP as appropriate. It would
be good to add extra error numbers in future to allow userspace to
distinguish the various errors that are currently reported as EINVAL,
i.e. irq_period < 0, too many events in a group, conflict between
exclude_* settings in a group, and PMU resource conflict in a group.
[ v2: fix a bug pointed out by Corey Ashford where error returns from
hw_perf_counter_init were not handled correctly in the case of
raw hardware events.]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090330171023.682428180@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-30 21:07:08 +04:00
return ERR_PTR ( - ENOMEM ) ;
2008-12-04 22:12:29 +03:00
2008-12-11 10:38:42 +03:00
/*
* Single counters are their own group leaders , with an
* empty sibling list :
*/
if ( ! group_leader )
group_leader = counter ;
2008-12-04 22:12:29 +03:00
mutex_init ( & counter - > mutex ) ;
2008-12-11 10:38:42 +03:00
INIT_LIST_HEAD ( & counter - > list_entry ) ;
2009-03-13 14:21:36 +03:00
INIT_LIST_HEAD ( & counter - > event_entry ) ;
2008-12-11 10:38:42 +03:00
INIT_LIST_HEAD ( & counter - > sibling_list ) ;
2008-12-04 22:12:29 +03:00
init_waitqueue_head ( & counter - > waitq ) ;
2009-03-23 20:22:10 +03:00
mutex_init ( & counter - > mmap_mutex ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
INIT_LIST_HEAD ( & counter - > child_list ) ;
2008-12-10 14:33:23 +03:00
counter - > cpu = cpu ;
counter - > hw_event = * hw_event ;
2008-12-11 10:38:42 +03:00
counter - > group_leader = group_leader ;
2009-04-29 14:47:03 +04:00
counter - > pmu = NULL ;
perf_counters: make software counters work as per-cpu counters
Impact: kernel crash fix
Yanmin Zhang reported that using a PERF_COUNT_TASK_CLOCK software
counter as a per-cpu counter would reliably crash the system, because
it calls __task_delta_exec with a null pointer. The page fault,
context switch and cpu migration counters also won't function
correctly as per-cpu counters since they reference the current task.
This fixes the problem by redirecting the task_clock counter to the
cpu_clock counter when used as a per-cpu counter, and by implementing
per-cpu page fault, context switch and cpu migration counters.
Along the way, this:
- Initializes counter->ctx earlier, in perf_counter_alloc, so that
sw_perf_counter_init can use it
- Adds code to kernel/sched.c to count task migrations into each
cpu, in rq->nr_migrations_in
- Exports the per-cpu context switch and task migration counts
via new functions added to kernel/sched.c
- Makes sure that if sw_perf_counter_init fails, we don't try to
initialize the counter as a hardware counter. Since the user has
passed a negative, non-raw event type, they clearly don't intend
for it to be interpreted as a hardware event.
Reported-by: "Zhang Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 14:42:47 +03:00
counter - > ctx = ctx ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
get_ctx ( ctx ) ;
2008-12-11 14:46:46 +03:00
2008-12-21 16:43:25 +03:00
counter - > state = PERF_COUNTER_STATE_INACTIVE ;
2008-12-17 02:43:10 +03:00
if ( hw_event - > disabled )
counter - > state = PERF_COUNTER_STATE_OFF ;
2009-04-29 14:47:03 +04:00
pmu = NULL ;
2009-03-19 22:26:18 +03:00
2009-05-15 17:19:28 +04:00
hwc = & counter - > hw ;
if ( hw_event - > freq & & hw_event - > irq_freq )
2009-05-15 17:37:47 +04:00
hwc - > irq_period = div64_u64 ( TICK_NSEC , hw_event - > irq_freq ) ;
2009-05-15 17:19:28 +04:00
else
hwc - > irq_period = hw_event - > irq_period ;
2009-05-05 19:50:26 +04:00
/*
* we currently do not support PERF_RECORD_GROUP on inherited counters
*/
if ( hw_event - > inherit & & ( hw_event - > record_type & PERF_RECORD_GROUP ) )
goto done ;
2009-03-23 20:22:06 +03:00
if ( perf_event_raw ( hw_event ) ) {
2009-04-29 14:47:03 +04:00
pmu = hw_perf_counter_init ( counter ) ;
2009-03-23 20:22:06 +03:00
goto done ;
}
switch ( perf_event_type ( hw_event ) ) {
2009-03-19 22:26:18 +03:00
case PERF_TYPE_HARDWARE :
2009-04-29 14:47:03 +04:00
pmu = hw_perf_counter_init ( counter ) ;
2009-03-19 22:26:18 +03:00
break ;
case PERF_TYPE_SOFTWARE :
2009-04-29 14:47:03 +04:00
pmu = sw_perf_counter_init ( counter ) ;
2009-03-19 22:26:18 +03:00
break ;
case PERF_TYPE_TRACEPOINT :
2009-04-29 14:47:03 +04:00
pmu = tp_perf_counter_init ( counter ) ;
2009-03-19 22:26:18 +03:00
break ;
}
perf_counter: make it possible for hw_perf_counter_init to return error codes
Impact: better error reporting
At present, if hw_perf_counter_init encounters an error, all it can do
is return NULL, which causes sys_perf_counter_open to return an EINVAL
error to userspace. This isn't very informative for userspace; it means
that userspace can't tell the difference between "sorry, oprofile is
already using the PMU" and "we don't support this CPU" and "this CPU
doesn't support the requested generic hardware event".
This commit uses the PTR_ERR/ERR_PTR/IS_ERR set of macros to let
hw_perf_counter_init return an error code on error rather than just NULL
if it wishes. If it does so, that error code will be returned from
sys_perf_counter_open to userspace. If it returns NULL, an EINVAL
error will be returned to userspace, as before.
This also adapts the powerpc hw_perf_counter_init to make use of this
to return ENXIO, EINVAL, EBUSY, or EOPNOTSUPP as appropriate. It would
be good to add extra error numbers in future to allow userspace to
distinguish the various errors that are currently reported as EINVAL,
i.e. irq_period < 0, too many events in a group, conflict between
exclude_* settings in a group, and PMU resource conflict in a group.
[ v2: fix a bug pointed out by Corey Ashford where error returns from
hw_perf_counter_init were not handled correctly in the case of
raw hardware events.]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090330171023.682428180@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-30 21:07:08 +04:00
done :
err = 0 ;
2009-04-29 14:47:03 +04:00
if ( ! pmu )
perf_counter: make it possible for hw_perf_counter_init to return error codes
Impact: better error reporting
At present, if hw_perf_counter_init encounters an error, all it can do
is return NULL, which causes sys_perf_counter_open to return an EINVAL
error to userspace. This isn't very informative for userspace; it means
that userspace can't tell the difference between "sorry, oprofile is
already using the PMU" and "we don't support this CPU" and "this CPU
doesn't support the requested generic hardware event".
This commit uses the PTR_ERR/ERR_PTR/IS_ERR set of macros to let
hw_perf_counter_init return an error code on error rather than just NULL
if it wishes. If it does so, that error code will be returned from
sys_perf_counter_open to userspace. If it returns NULL, an EINVAL
error will be returned to userspace, as before.
This also adapts the powerpc hw_perf_counter_init to make use of this
to return ENXIO, EINVAL, EBUSY, or EOPNOTSUPP as appropriate. It would
be good to add extra error numbers in future to allow userspace to
distinguish the various errors that are currently reported as EINVAL,
i.e. irq_period < 0, too many events in a group, conflict between
exclude_* settings in a group, and PMU resource conflict in a group.
[ v2: fix a bug pointed out by Corey Ashford where error returns from
hw_perf_counter_init were not handled correctly in the case of
raw hardware events.]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090330171023.682428180@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-30 21:07:08 +04:00
err = - EINVAL ;
2009-04-29 14:47:03 +04:00
else if ( IS_ERR ( pmu ) )
err = PTR_ERR ( pmu ) ;
2008-12-11 15:21:10 +03:00
perf_counter: make it possible for hw_perf_counter_init to return error codes
Impact: better error reporting
At present, if hw_perf_counter_init encounters an error, all it can do
is return NULL, which causes sys_perf_counter_open to return an EINVAL
error to userspace. This isn't very informative for userspace; it means
that userspace can't tell the difference between "sorry, oprofile is
already using the PMU" and "we don't support this CPU" and "this CPU
doesn't support the requested generic hardware event".
This commit uses the PTR_ERR/ERR_PTR/IS_ERR set of macros to let
hw_perf_counter_init return an error code on error rather than just NULL
if it wishes. If it does so, that error code will be returned from
sys_perf_counter_open to userspace. If it returns NULL, an EINVAL
error will be returned to userspace, as before.
This also adapts the powerpc hw_perf_counter_init to make use of this
to return ENXIO, EINVAL, EBUSY, or EOPNOTSUPP as appropriate. It would
be good to add extra error numbers in future to allow userspace to
distinguish the various errors that are currently reported as EINVAL,
i.e. irq_period < 0, too many events in a group, conflict between
exclude_* settings in a group, and PMU resource conflict in a group.
[ v2: fix a bug pointed out by Corey Ashford where error returns from
hw_perf_counter_init were not handled correctly in the case of
raw hardware events.]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090330171023.682428180@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-30 21:07:08 +04:00
if ( err ) {
2008-12-11 14:46:46 +03:00
kfree ( counter ) ;
perf_counter: make it possible for hw_perf_counter_init to return error codes
Impact: better error reporting
At present, if hw_perf_counter_init encounters an error, all it can do
is return NULL, which causes sys_perf_counter_open to return an EINVAL
error to userspace. This isn't very informative for userspace; it means
that userspace can't tell the difference between "sorry, oprofile is
already using the PMU" and "we don't support this CPU" and "this CPU
doesn't support the requested generic hardware event".
This commit uses the PTR_ERR/ERR_PTR/IS_ERR set of macros to let
hw_perf_counter_init return an error code on error rather than just NULL
if it wishes. If it does so, that error code will be returned from
sys_perf_counter_open to userspace. If it returns NULL, an EINVAL
error will be returned to userspace, as before.
This also adapts the powerpc hw_perf_counter_init to make use of this
to return ENXIO, EINVAL, EBUSY, or EOPNOTSUPP as appropriate. It would
be good to add extra error numbers in future to allow userspace to
distinguish the various errors that are currently reported as EINVAL,
i.e. irq_period < 0, too many events in a group, conflict between
exclude_* settings in a group, and PMU resource conflict in a group.
[ v2: fix a bug pointed out by Corey Ashford where error returns from
hw_perf_counter_init were not handled correctly in the case of
raw hardware events.]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090330171023.682428180@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-30 21:07:08 +04:00
return ERR_PTR ( err ) ;
2008-12-11 14:46:46 +03:00
}
perf_counter: make it possible for hw_perf_counter_init to return error codes
Impact: better error reporting
At present, if hw_perf_counter_init encounters an error, all it can do
is return NULL, which causes sys_perf_counter_open to return an EINVAL
error to userspace. This isn't very informative for userspace; it means
that userspace can't tell the difference between "sorry, oprofile is
already using the PMU" and "we don't support this CPU" and "this CPU
doesn't support the requested generic hardware event".
This commit uses the PTR_ERR/ERR_PTR/IS_ERR set of macros to let
hw_perf_counter_init return an error code on error rather than just NULL
if it wishes. If it does so, that error code will be returned from
sys_perf_counter_open to userspace. If it returns NULL, an EINVAL
error will be returned to userspace, as before.
This also adapts the powerpc hw_perf_counter_init to make use of this
to return ENXIO, EINVAL, EBUSY, or EOPNOTSUPP as appropriate. It would
be good to add extra error numbers in future to allow userspace to
distinguish the various errors that are currently reported as EINVAL,
i.e. irq_period < 0, too many events in a group, conflict between
exclude_* settings in a group, and PMU resource conflict in a group.
[ v2: fix a bug pointed out by Corey Ashford where error returns from
hw_perf_counter_init were not handled correctly in the case of
raw hardware events.]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090330171023.682428180@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-30 21:07:08 +04:00
2009-04-29 14:47:03 +04:00
counter - > pmu = pmu ;
2008-12-04 22:12:29 +03:00
2009-05-08 20:52:21 +04:00
atomic_inc ( & nr_counters ) ;
2009-04-09 12:53:44 +04:00
if ( counter - > hw_event . mmap )
atomic_inc ( & nr_mmap_tracking ) ;
if ( counter - > hw_event . munmap )
atomic_inc ( & nr_munmap_tracking ) ;
if ( counter - > hw_event . comm )
atomic_inc ( & nr_comm_tracking ) ;
2008-12-04 22:12:29 +03:00
return counter ;
}
/**
2009-03-04 12:36:51 +03:00
* sys_perf_counter_open - open a performance counter , associate it to a task / cpu
2008-12-10 14:33:23 +03:00
*
* @ hw_event_uptr : event type attributes for monitoring / sampling
2008-12-04 22:12:29 +03:00
* @ pid : target pid
2008-12-10 14:33:23 +03:00
* @ cpu : target cpu
* @ group_fd : group leader counter fd
2008-12-04 22:12:29 +03:00
*/
2009-03-04 12:36:51 +03:00
SYSCALL_DEFINE5 ( perf_counter_open ,
2009-02-26 14:43:46 +03:00
const struct perf_counter_hw_event __user * , hw_event_uptr ,
2009-03-04 12:36:51 +03:00
pid_t , pid , int , cpu , int , group_fd , unsigned long , flags )
2008-12-04 22:12:29 +03:00
{
2008-12-11 10:38:42 +03:00
struct perf_counter * counter , * group_leader ;
2008-12-10 14:33:23 +03:00
struct perf_counter_hw_event hw_event ;
2008-12-11 10:38:42 +03:00
struct perf_counter_context * ctx ;
2008-12-12 15:49:45 +03:00
struct file * counter_file = NULL ;
2008-12-11 10:38:42 +03:00
struct file * group_file = NULL ;
int fput_needed = 0 ;
2008-12-12 15:49:45 +03:00
int fput_needed2 = 0 ;
2008-12-04 22:12:29 +03:00
int ret ;
2009-03-04 12:36:51 +03:00
/* for future expandability... */
if ( flags )
return - EINVAL ;
2008-12-10 14:33:23 +03:00
if ( copy_from_user ( & hw_event , hw_event_uptr , sizeof ( hw_event ) ) ! = 0 )
2008-12-08 21:26:59 +03:00
return - EFAULT ;
2008-12-11 10:38:42 +03:00
/*
2008-12-11 13:26:29 +03:00
* Get the target context ( task or percpu ) :
*/
ctx = find_get_context ( pid , cpu ) ;
if ( IS_ERR ( ctx ) )
return PTR_ERR ( ctx ) ;
/*
* Look up the group leader ( we will attach this counter to it ) :
2008-12-11 10:38:42 +03:00
*/
group_leader = NULL ;
if ( group_fd ! = - 1 ) {
ret = - EINVAL ;
group_file = fget_light ( group_fd , & fput_needed ) ;
if ( ! group_file )
2008-12-11 13:26:29 +03:00
goto err_put_context ;
2008-12-11 10:38:42 +03:00
if ( group_file - > f_op ! = & perf_fops )
2008-12-11 13:26:29 +03:00
goto err_put_context ;
2008-12-11 10:38:42 +03:00
group_leader = group_file - > private_data ;
/*
2008-12-11 13:26:29 +03:00
* Do not allow a recursive hierarchy ( this new sibling
* becoming part of another group - sibling ) :
*/
if ( group_leader - > group_leader ! = group_leader )
goto err_put_context ;
/*
* Do not allow to attach to a group in a different
* task or CPU context :
2008-12-11 10:38:42 +03:00
*/
2008-12-11 13:26:29 +03:00
if ( group_leader - > ctx ! = ctx )
goto err_put_context ;
perf_counter: Add support for pinned and exclusive counter groups
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-14 13:00:30 +03:00
/*
* Only a group leader can be exclusive or pinned
*/
if ( hw_event . exclusive | | hw_event . pinned )
goto err_put_context ;
2008-12-11 10:38:42 +03:00
}
perf_counters: make software counters work as per-cpu counters
Impact: kernel crash fix
Yanmin Zhang reported that using a PERF_COUNT_TASK_CLOCK software
counter as a per-cpu counter would reliably crash the system, because
it calls __task_delta_exec with a null pointer. The page fault,
context switch and cpu migration counters also won't function
correctly as per-cpu counters since they reference the current task.
This fixes the problem by redirecting the task_clock counter to the
cpu_clock counter when used as a per-cpu counter, and by implementing
per-cpu page fault, context switch and cpu migration counters.
Along the way, this:
- Initializes counter->ctx earlier, in perf_counter_alloc, so that
sw_perf_counter_init can use it
- Adds code to kernel/sched.c to count task migrations into each
cpu, in rq->nr_migrations_in
- Exports the per-cpu context switch and task migration counts
via new functions added to kernel/sched.c
- Makes sure that if sw_perf_counter_init fails, we don't try to
initialize the counter as a hardware counter. Since the user has
passed a negative, non-raw event type, they clearly don't intend
for it to be interpreted as a hardware event.
Reported-by: "Zhang Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 14:42:47 +03:00
counter = perf_counter_alloc ( & hw_event , cpu , ctx , group_leader ,
GFP_KERNEL ) ;
perf_counter: make it possible for hw_perf_counter_init to return error codes
Impact: better error reporting
At present, if hw_perf_counter_init encounters an error, all it can do
is return NULL, which causes sys_perf_counter_open to return an EINVAL
error to userspace. This isn't very informative for userspace; it means
that userspace can't tell the difference between "sorry, oprofile is
already using the PMU" and "we don't support this CPU" and "this CPU
doesn't support the requested generic hardware event".
This commit uses the PTR_ERR/ERR_PTR/IS_ERR set of macros to let
hw_perf_counter_init return an error code on error rather than just NULL
if it wishes. If it does so, that error code will be returned from
sys_perf_counter_open to userspace. If it returns NULL, an EINVAL
error will be returned to userspace, as before.
This also adapts the powerpc hw_perf_counter_init to make use of this
to return ENXIO, EINVAL, EBUSY, or EOPNOTSUPP as appropriate. It would
be good to add extra error numbers in future to allow userspace to
distinguish the various errors that are currently reported as EINVAL,
i.e. irq_period < 0, too many events in a group, conflict between
exclude_* settings in a group, and PMU resource conflict in a group.
[ v2: fix a bug pointed out by Corey Ashford where error returns from
hw_perf_counter_init were not handled correctly in the case of
raw hardware events.]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090330171023.682428180@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-30 21:07:08 +04:00
ret = PTR_ERR ( counter ) ;
if ( IS_ERR ( counter ) )
2008-12-04 22:12:29 +03:00
goto err_put_context ;
ret = anon_inode_getfd ( " [perf_counter] " , & perf_fops , counter , 0 ) ;
if ( ret < 0 )
2008-12-12 15:49:45 +03:00
goto err_free_put_context ;
counter_file = fget_light ( ret , & fput_needed2 ) ;
if ( ! counter_file )
goto err_free_put_context ;
counter - > filp = counter_file ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
mutex_lock ( & ctx - > mutex ) ;
2008-12-12 15:49:45 +03:00
perf_install_in_context ( ctx , counter , cpu ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
mutex_unlock ( & ctx - > mutex ) ;
2008-12-12 15:49:45 +03:00
fput_light ( counter_file , fput_needed2 ) ;
2008-12-04 22:12:29 +03:00
2008-12-11 10:38:42 +03:00
out_fput :
fput_light ( group_file , fput_needed ) ;
2008-12-04 22:12:29 +03:00
return ret ;
2008-12-12 15:49:45 +03:00
err_free_put_context :
2008-12-04 22:12:29 +03:00
kfree ( counter ) ;
err_put_context :
put_context ( ctx ) ;
2008-12-11 10:38:42 +03:00
goto out_fput ;
2008-12-04 22:12:29 +03:00
}
2008-12-12 15:49:45 +03:00
/*
* inherit a counter from parent task to child task :
*/
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
static struct perf_counter *
2008-12-12 15:49:45 +03:00
inherit_counter ( struct perf_counter * parent_counter ,
struct task_struct * parent ,
struct perf_counter_context * parent_ctx ,
struct task_struct * child ,
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
struct perf_counter * group_leader ,
2008-12-12 15:49:45 +03:00
struct perf_counter_context * child_ctx )
{
struct perf_counter * child_counter ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
/*
* Instead of creating recursive hierarchies of counters ,
* we link inherited counters back to the original parent ,
* which has a filp for sure , which we use as the reference
* count :
*/
if ( parent_counter - > parent )
parent_counter = parent_counter - > parent ;
2008-12-12 15:49:45 +03:00
child_counter = perf_counter_alloc ( & parent_counter - > hw_event ,
perf_counters: make software counters work as per-cpu counters
Impact: kernel crash fix
Yanmin Zhang reported that using a PERF_COUNT_TASK_CLOCK software
counter as a per-cpu counter would reliably crash the system, because
it calls __task_delta_exec with a null pointer. The page fault,
context switch and cpu migration counters also won't function
correctly as per-cpu counters since they reference the current task.
This fixes the problem by redirecting the task_clock counter to the
cpu_clock counter when used as a per-cpu counter, and by implementing
per-cpu page fault, context switch and cpu migration counters.
Along the way, this:
- Initializes counter->ctx earlier, in perf_counter_alloc, so that
sw_perf_counter_init can use it
- Adds code to kernel/sched.c to count task migrations into each
cpu, in rq->nr_migrations_in
- Exports the per-cpu context switch and task migration counts
via new functions added to kernel/sched.c
- Makes sure that if sw_perf_counter_init fails, we don't try to
initialize the counter as a hardware counter. Since the user has
passed a negative, non-raw event type, they clearly don't intend
for it to be interpreted as a hardware event.
Reported-by: "Zhang Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 14:42:47 +03:00
parent_counter - > cpu , child_ctx ,
group_leader , GFP_KERNEL ) ;
perf_counter: make it possible for hw_perf_counter_init to return error codes
Impact: better error reporting
At present, if hw_perf_counter_init encounters an error, all it can do
is return NULL, which causes sys_perf_counter_open to return an EINVAL
error to userspace. This isn't very informative for userspace; it means
that userspace can't tell the difference between "sorry, oprofile is
already using the PMU" and "we don't support this CPU" and "this CPU
doesn't support the requested generic hardware event".
This commit uses the PTR_ERR/ERR_PTR/IS_ERR set of macros to let
hw_perf_counter_init return an error code on error rather than just NULL
if it wishes. If it does so, that error code will be returned from
sys_perf_counter_open to userspace. If it returns NULL, an EINVAL
error will be returned to userspace, as before.
This also adapts the powerpc hw_perf_counter_init to make use of this
to return ENXIO, EINVAL, EBUSY, or EOPNOTSUPP as appropriate. It would
be good to add extra error numbers in future to allow userspace to
distinguish the various errors that are currently reported as EINVAL,
i.e. irq_period < 0, too many events in a group, conflict between
exclude_* settings in a group, and PMU resource conflict in a group.
[ v2: fix a bug pointed out by Corey Ashford where error returns from
hw_perf_counter_init were not handled correctly in the case of
raw hardware events.]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090330171023.682428180@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-30 21:07:08 +04:00
if ( IS_ERR ( child_counter ) )
return child_counter ;
2008-12-12 15:49:45 +03:00
/*
* Link it up in the child ' s context :
*/
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
add_counter_to_ctx ( child_counter , child_ctx ) ;
2008-12-12 15:49:45 +03:00
child_counter - > parent = parent_counter ;
/*
* inherit into child ' s child as well :
*/
child_counter - > hw_event . inherit = 1 ;
/*
* Get a reference to the parent filp - we will fput it
* when the child counter exits . This is safe to do because
* we are in the parent and we know that the filp still
* exists and has a nonzero count :
*/
atomic_long_inc ( & parent_counter - > filp - > f_count ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
/*
* Link this into the parent counter ' s child list
*/
mutex_lock ( & parent_counter - > mutex ) ;
list_add_tail ( & child_counter - > child_list , & parent_counter - > child_list ) ;
/*
* Make the child state follow the state of the parent counter ,
* not its hw_event . disabled bit . We hold the parent ' s mutex ,
* so we won ' t race with perf_counter_ { en , dis } able_family .
*/
if ( parent_counter - > state > = PERF_COUNTER_STATE_INACTIVE )
child_counter - > state = PERF_COUNTER_STATE_INACTIVE ;
else
child_counter - > state = PERF_COUNTER_STATE_OFF ;
mutex_unlock ( & parent_counter - > mutex ) ;
return child_counter ;
}
static int inherit_group ( struct perf_counter * parent_counter ,
struct task_struct * parent ,
struct perf_counter_context * parent_ctx ,
struct task_struct * child ,
struct perf_counter_context * child_ctx )
{
struct perf_counter * leader ;
struct perf_counter * sub ;
perf_counter: make it possible for hw_perf_counter_init to return error codes
Impact: better error reporting
At present, if hw_perf_counter_init encounters an error, all it can do
is return NULL, which causes sys_perf_counter_open to return an EINVAL
error to userspace. This isn't very informative for userspace; it means
that userspace can't tell the difference between "sorry, oprofile is
already using the PMU" and "we don't support this CPU" and "this CPU
doesn't support the requested generic hardware event".
This commit uses the PTR_ERR/ERR_PTR/IS_ERR set of macros to let
hw_perf_counter_init return an error code on error rather than just NULL
if it wishes. If it does so, that error code will be returned from
sys_perf_counter_open to userspace. If it returns NULL, an EINVAL
error will be returned to userspace, as before.
This also adapts the powerpc hw_perf_counter_init to make use of this
to return ENXIO, EINVAL, EBUSY, or EOPNOTSUPP as appropriate. It would
be good to add extra error numbers in future to allow userspace to
distinguish the various errors that are currently reported as EINVAL,
i.e. irq_period < 0, too many events in a group, conflict between
exclude_* settings in a group, and PMU resource conflict in a group.
[ v2: fix a bug pointed out by Corey Ashford where error returns from
hw_perf_counter_init were not handled correctly in the case of
raw hardware events.]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090330171023.682428180@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-30 21:07:08 +04:00
struct perf_counter * child_ctr ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
leader = inherit_counter ( parent_counter , parent , parent_ctx ,
child , NULL , child_ctx ) ;
perf_counter: make it possible for hw_perf_counter_init to return error codes
Impact: better error reporting
At present, if hw_perf_counter_init encounters an error, all it can do
is return NULL, which causes sys_perf_counter_open to return an EINVAL
error to userspace. This isn't very informative for userspace; it means
that userspace can't tell the difference between "sorry, oprofile is
already using the PMU" and "we don't support this CPU" and "this CPU
doesn't support the requested generic hardware event".
This commit uses the PTR_ERR/ERR_PTR/IS_ERR set of macros to let
hw_perf_counter_init return an error code on error rather than just NULL
if it wishes. If it does so, that error code will be returned from
sys_perf_counter_open to userspace. If it returns NULL, an EINVAL
error will be returned to userspace, as before.
This also adapts the powerpc hw_perf_counter_init to make use of this
to return ENXIO, EINVAL, EBUSY, or EOPNOTSUPP as appropriate. It would
be good to add extra error numbers in future to allow userspace to
distinguish the various errors that are currently reported as EINVAL,
i.e. irq_period < 0, too many events in a group, conflict between
exclude_* settings in a group, and PMU resource conflict in a group.
[ v2: fix a bug pointed out by Corey Ashford where error returns from
hw_perf_counter_init were not handled correctly in the case of
raw hardware events.]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090330171023.682428180@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-30 21:07:08 +04:00
if ( IS_ERR ( leader ) )
return PTR_ERR ( leader ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
list_for_each_entry ( sub , & parent_counter - > sibling_list , list_entry ) {
perf_counter: make it possible for hw_perf_counter_init to return error codes
Impact: better error reporting
At present, if hw_perf_counter_init encounters an error, all it can do
is return NULL, which causes sys_perf_counter_open to return an EINVAL
error to userspace. This isn't very informative for userspace; it means
that userspace can't tell the difference between "sorry, oprofile is
already using the PMU" and "we don't support this CPU" and "this CPU
doesn't support the requested generic hardware event".
This commit uses the PTR_ERR/ERR_PTR/IS_ERR set of macros to let
hw_perf_counter_init return an error code on error rather than just NULL
if it wishes. If it does so, that error code will be returned from
sys_perf_counter_open to userspace. If it returns NULL, an EINVAL
error will be returned to userspace, as before.
This also adapts the powerpc hw_perf_counter_init to make use of this
to return ENXIO, EINVAL, EBUSY, or EOPNOTSUPP as appropriate. It would
be good to add extra error numbers in future to allow userspace to
distinguish the various errors that are currently reported as EINVAL,
i.e. irq_period < 0, too many events in a group, conflict between
exclude_* settings in a group, and PMU resource conflict in a group.
[ v2: fix a bug pointed out by Corey Ashford where error returns from
hw_perf_counter_init were not handled correctly in the case of
raw hardware events.]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Orig-LKML-Reference: <20090330171023.682428180@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-30 21:07:08 +04:00
child_ctr = inherit_counter ( sub , parent , parent_ctx ,
child , leader , child_ctx ) ;
if ( IS_ERR ( child_ctr ) )
return PTR_ERR ( child_ctr ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
}
2008-12-12 15:49:45 +03:00
return 0 ;
}
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
static void sync_child_counter ( struct perf_counter * child_counter ,
struct perf_counter * parent_counter )
{
2009-05-15 22:45:59 +04:00
u64 child_val ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
child_val = atomic64_read ( & child_counter - > count ) ;
/*
* Add back the child ' s count to the parent ' s count :
*/
atomic64_add ( child_val , & parent_counter - > count ) ;
perf_counter: record time running and time enabled for each counter
Impact: new functionality
Currently, if there are more counters enabled than can fit on the CPU,
the kernel will multiplex the counters on to the hardware using
round-robin scheduling. That isn't too bad for sampling counters, but
for counting counters it means that the value read from a counter
represents some unknown fraction of the true count of events that
occurred while the counter was enabled.
This remedies the situation by keeping track of how long each counter
is enabled for, and how long it is actually on the cpu and counting
events. These times are recorded in nanoseconds using the task clock
for per-task counters and the cpu clock for per-cpu counters.
These values can be supplied to userspace on a read from the counter.
Userspace requests that they be supplied after the counter value by
setting the PERF_FORMAT_TOTAL_TIME_ENABLED and/or
PERF_FORMAT_TOTAL_TIME_RUNNING bits in the hw_event.read_format field
when creating the counter. (There is no way to change the read format
after the counter is created, though it would be possible to add some
way to do that.)
Using this information it is possible for userspace to scale the count
it reads from the counter to get an estimate of the true count:
true_count_estimate = count * total_time_enabled / total_time_running
This also lets userspace detect the situation where the counter never
got to go on the cpu: total_time_running == 0.
This functionality has been requested by the PAPI developers, and will
be generally needed for interpreting the count values from counting
counters correctly.
In the implementation, this keeps 5 time values (in nanoseconds) for
each counter: total_time_enabled and total_time_running are used when
the counter is in state OFF or ERROR and for reporting back to
userspace. When the counter is in state INACTIVE or ACTIVE, it is the
tstamp_enabled, tstamp_running and tstamp_stopped values that are
relevant, and total_time_enabled and total_time_running are determined
from them. (tstamp_stopped is only used in INACTIVE state.) The
reason for doing it like this is that it means that only counters
being enabled or disabled at sched-in and sched-out time need to be
updated. There are no new loops that iterate over all counters to
update total_time_enabled or total_time_running.
This also keeps separate child_total_time_running and
child_total_time_enabled fields that get added in when reporting the
totals to userspace. They are separate fields so that they can be
atomic. We don't want to use atomics for total_time_running,
total_time_enabled etc., because then we would have to use atomic
sequences to update them, which are slower than regular arithmetic and
memory accesses.
It is possible to measure total_time_running by adding a task_clock
counter to each group of counters, and total_time_enabled can be
measured approximately with a top-level task_clock counter (though
inaccuracies will creep in if you need to disable and enable groups
since it is not possible in general to disable/enable the top-level
task_clock counter simultaneously with another group). However, that
adds extra overhead - I measured around 15% increase in the context
switch latency reported by lat_ctx (from lmbench) when a task_clock
counter was added to each of 2 groups, and around 25% increase when a
task_clock counter was added to each of 4 groups. (In both cases a
top-level task-clock counter was also added.)
In contrast, the code added in this commit gives better information
with no overhead that I could measure (in fact in some cases I
measured lower times with this code, but the differences were all less
than one standard deviation).
[ v2: address review comments by Andrew Morton. ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Orig-LKML-Reference: <18890.6578.728637.139402@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-25 14:46:58 +03:00
atomic64_add ( child_counter - > total_time_enabled ,
& parent_counter - > child_total_time_enabled ) ;
atomic64_add ( child_counter - > total_time_running ,
& parent_counter - > child_total_time_running ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
/*
* Remove this counter from the parent ' s list
*/
mutex_lock ( & parent_counter - > mutex ) ;
list_del_init ( & child_counter - > child_list ) ;
mutex_unlock ( & parent_counter - > mutex ) ;
/*
* Release the parent counter , if this was the last
* reference to it .
*/
fput ( parent_counter - > filp ) ;
}
2008-12-12 15:49:45 +03:00
static void
__perf_counter_exit_task ( struct task_struct * child ,
struct perf_counter * child_counter ,
struct perf_counter_context * child_ctx )
{
struct perf_counter * parent_counter ;
/*
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
* Protect against concurrent operations on child_counter
* due its fd getting closed , etc .
2008-12-12 15:49:45 +03:00
*/
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
mutex_lock ( & child_counter - > mutex ) ;
2008-12-15 01:20:36 +03:00
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
update_counter_times ( child_counter ) ;
list_del_counter ( child_counter , child_ctx ) ;
2008-12-15 01:20:36 +03:00
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
mutex_unlock ( & child_counter - > mutex ) ;
2008-12-12 15:49:45 +03:00
parent_counter = child_counter - > parent ;
/*
* It can happen that parent exits first , and has counters
* that are still around due to the child reference . These
* counters need to be zapped - but otherwise linger .
*/
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
if ( parent_counter ) {
sync_child_counter ( child_counter , parent_counter ) ;
2009-03-19 22:26:16 +03:00
free_counter ( child_counter ) ;
2009-02-11 15:53:19 +03:00
}
2008-12-12 15:49:45 +03:00
}
/*
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
* When a child task exits , feed back counter values to parent counters .
2008-12-12 15:49:45 +03:00
*
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
* Note : we may be running in child context , but the PID is not hashed
2008-12-12 15:49:45 +03:00
* anymore so new counters will not be added .
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
* ( XXX not sure that is true when we get called from flush_old_exec .
* - - paulus )
2008-12-12 15:49:45 +03:00
*/
void perf_counter_exit_task ( struct task_struct * child )
{
struct perf_counter * child_counter , * tmp ;
struct perf_counter_context * child_ctx ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
unsigned long flags ;
2008-12-12 15:49:45 +03:00
2009-05-17 13:08:41 +04:00
WARN_ON_ONCE ( child ! = current ) ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
child_ctx = child - > perf_counter_ctxp ;
2008-12-12 15:49:45 +03:00
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
if ( likely ( ! child_ctx ) )
2008-12-12 15:49:45 +03:00
return ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
local_irq_save ( flags ) ;
__perf_counter_task_sched_out ( child_ctx ) ;
child - > perf_counter_ctxp = NULL ;
local_irq_restore ( flags ) ;
mutex_lock ( & child_ctx - > mutex ) ;
2009-05-15 22:45:59 +04:00
again :
2008-12-12 15:49:45 +03:00
list_for_each_entry_safe ( child_counter , tmp , & child_ctx - > counter_list ,
list_entry )
__perf_counter_exit_task ( child , child_counter , child_ctx ) ;
2009-05-15 22:45:59 +04:00
/*
* If the last counter was a group counter , it will have appended all
* its siblings to the list , but we obtained ' tmp ' before that which
* will still point to the list head terminating the iteration .
*/
if ( ! list_empty ( & child_ctx - > counter_list ) )
goto again ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
mutex_unlock ( & child_ctx - > mutex ) ;
put_ctx ( child_ctx ) ;
2008-12-12 15:49:45 +03:00
}
/*
* Initialize the perf_counter context in task_struct
*/
void perf_counter_init_task ( struct task_struct * child )
{
struct perf_counter_context * child_ctx , * parent_ctx ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
struct perf_counter * counter ;
2008-12-12 15:49:45 +03:00
struct task_struct * parent = current ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
child - > perf_counter_ctxp = NULL ;
2008-12-12 15:49:45 +03:00
/*
* This is executed from the parent task context , so inherit
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
* counters that have been marked for cloning .
* First allocate and initialize a context for the child .
2008-12-12 15:49:45 +03:00
*/
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
child_ctx = kmalloc ( sizeof ( struct perf_counter_context ) , GFP_KERNEL ) ;
if ( ! child_ctx )
return ;
parent_ctx = parent - > perf_counter_ctxp ;
if ( likely ( ! parent_ctx | | ! parent_ctx - > nr_counters ) )
2008-12-12 15:49:45 +03:00
return ;
perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct. The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.
This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.
The perf_counter_context structures are reference-counted and freed
when the last reference is dropped. A context can have references
from its task and the counters on its task. Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.
Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.
This also removes the task pointer from the perf_counter struct. The
task pointer was not used anywhere and would make it harder to move a
context from one task to another. Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.
The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.
We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.
Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.
This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.
[ Impact: refactor counter context management to prepare for new feature ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 08:17:31 +04:00
__perf_counter_init_context ( child_ctx , child ) ;
child - > perf_counter_ctxp = child_ctx ;
2008-12-12 15:49:45 +03:00
/*
* Lock the parent list . No need to lock the child - not PID
* hashed yet and not running , so nobody can access it .
*/
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
mutex_lock ( & parent_ctx - > mutex ) ;
2008-12-12 15:49:45 +03:00
/*
* We dont have to disable NMIs - we are only looking at
* the list , not manipulating it :
*/
2009-05-20 14:21:19 +04:00
list_for_each_entry_rcu ( counter , & parent_ctx - > event_list , event_entry ) {
if ( counter ! = counter - > group_leader )
continue ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
if ( ! counter - > hw_event . inherit )
2008-12-12 15:49:45 +03:00
continue ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
if ( inherit_group ( counter , parent ,
2008-12-12 15:49:45 +03:00
parent_ctx , child , child_ctx ) )
break ;
}
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
mutex_unlock ( & parent_ctx - > mutex ) ;
2008-12-12 15:49:45 +03:00
}
2008-12-11 10:38:42 +03:00
static void __cpuinit perf_counter_init_cpu ( int cpu )
2008-12-04 22:12:29 +03:00
{
2008-12-11 10:38:42 +03:00
struct perf_cpu_context * cpuctx ;
2008-12-04 22:12:29 +03:00
2008-12-11 10:38:42 +03:00
cpuctx = & per_cpu ( perf_cpu_context , cpu ) ;
__perf_counter_init_context ( & cpuctx - > ctx , NULL ) ;
2008-12-04 22:12:29 +03:00
2009-05-04 21:23:18 +04:00
spin_lock ( & perf_resource_lock ) ;
2008-12-11 10:38:42 +03:00
cpuctx - > max_pertask = perf_max_counters - perf_reserved_percpu ;
2009-05-04 21:23:18 +04:00
spin_unlock ( & perf_resource_lock ) ;
2008-12-11 10:38:42 +03:00
2009-01-14 05:44:19 +03:00
hw_perf_counter_setup ( cpu ) ;
2008-12-04 22:12:29 +03:00
}
# ifdef CONFIG_HOTPLUG_CPU
2008-12-11 10:38:42 +03:00
static void __perf_counter_exit_cpu ( void * info )
2008-12-04 22:12:29 +03:00
{
struct perf_cpu_context * cpuctx = & __get_cpu_var ( perf_cpu_context ) ;
struct perf_counter_context * ctx = & cpuctx - > ctx ;
struct perf_counter * counter , * tmp ;
2008-12-11 10:38:42 +03:00
list_for_each_entry_safe ( counter , tmp , & ctx - > counter_list , list_entry )
__perf_counter_remove_from_context ( counter ) ;
2008-12-04 22:12:29 +03:00
}
2008-12-11 10:38:42 +03:00
static void perf_counter_exit_cpu ( int cpu )
2008-12-04 22:12:29 +03:00
{
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
struct perf_cpu_context * cpuctx = & per_cpu ( perf_cpu_context , cpu ) ;
struct perf_counter_context * ctx = & cpuctx - > ctx ;
mutex_lock ( & ctx - > mutex ) ;
2008-12-11 10:38:42 +03:00
smp_call_function_single ( cpu , __perf_counter_exit_cpu , NULL , 1 ) ;
perf_counter: Add counter enable/disable ioctls
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-01-17 10:10:22 +03:00
mutex_unlock ( & ctx - > mutex ) ;
2008-12-04 22:12:29 +03:00
}
# else
2008-12-11 10:38:42 +03:00
static inline void perf_counter_exit_cpu ( int cpu ) { }
2008-12-04 22:12:29 +03:00
# endif
static int __cpuinit
perf_cpu_notify ( struct notifier_block * self , unsigned long action , void * hcpu )
{
unsigned int cpu = ( long ) hcpu ;
switch ( action ) {
case CPU_UP_PREPARE :
case CPU_UP_PREPARE_FROZEN :
2008-12-11 10:38:42 +03:00
perf_counter_init_cpu ( cpu ) ;
2008-12-04 22:12:29 +03:00
break ;
case CPU_DOWN_PREPARE :
case CPU_DOWN_PREPARE_FROZEN :
2008-12-11 10:38:42 +03:00
perf_counter_exit_cpu ( cpu ) ;
2008-12-04 22:12:29 +03:00
break ;
default :
break ;
}
return NOTIFY_OK ;
}
static struct notifier_block __cpuinitdata perf_cpu_nb = {
. notifier_call = perf_cpu_notify ,
} ;
2009-05-04 21:13:30 +04:00
void __init perf_counter_init ( void )
2008-12-04 22:12:29 +03:00
{
perf_cpu_notify ( & perf_cpu_nb , ( unsigned long ) CPU_UP_PREPARE ,
( void * ) ( long ) smp_processor_id ( ) ) ;
register_cpu_notifier ( & perf_cpu_nb ) ;
}
static ssize_t perf_show_reserve_percpu ( struct sysdev_class * class , char * buf )
{
return sprintf ( buf , " %d \n " , perf_reserved_percpu ) ;
}
static ssize_t
perf_set_reserve_percpu ( struct sysdev_class * class ,
const char * buf ,
size_t count )
{
struct perf_cpu_context * cpuctx ;
unsigned long val ;
int err , cpu , mpt ;
err = strict_strtoul ( buf , 10 , & val ) ;
if ( err )
return err ;
if ( val > perf_max_counters )
return - EINVAL ;
2009-05-04 21:23:18 +04:00
spin_lock ( & perf_resource_lock ) ;
2008-12-04 22:12:29 +03:00
perf_reserved_percpu = val ;
for_each_online_cpu ( cpu ) {
cpuctx = & per_cpu ( perf_cpu_context , cpu ) ;
spin_lock_irq ( & cpuctx - > ctx . lock ) ;
mpt = min ( perf_max_counters - cpuctx - > ctx . nr_counters ,
perf_max_counters - perf_reserved_percpu ) ;
cpuctx - > max_pertask = mpt ;
spin_unlock_irq ( & cpuctx - > ctx . lock ) ;
}
2009-05-04 21:23:18 +04:00
spin_unlock ( & perf_resource_lock ) ;
2008-12-04 22:12:29 +03:00
return count ;
}
static ssize_t perf_show_overcommit ( struct sysdev_class * class , char * buf )
{
return sprintf ( buf , " %d \n " , perf_overcommit ) ;
}
static ssize_t
perf_set_overcommit ( struct sysdev_class * class , const char * buf , size_t count )
{
unsigned long val ;
int err ;
err = strict_strtoul ( buf , 10 , & val ) ;
if ( err )
return err ;
if ( val > 1 )
return - EINVAL ;
2009-05-04 21:23:18 +04:00
spin_lock ( & perf_resource_lock ) ;
2008-12-04 22:12:29 +03:00
perf_overcommit = val ;
2009-05-04 21:23:18 +04:00
spin_unlock ( & perf_resource_lock ) ;
2008-12-04 22:12:29 +03:00
return count ;
}
static SYSDEV_CLASS_ATTR (
reserve_percpu ,
0644 ,
perf_show_reserve_percpu ,
perf_set_reserve_percpu
) ;
static SYSDEV_CLASS_ATTR (
overcommit ,
0644 ,
perf_show_overcommit ,
perf_set_overcommit
) ;
static struct attribute * perfclass_attrs [ ] = {
& attr_reserve_percpu . attr ,
& attr_overcommit . attr ,
NULL
} ;
static struct attribute_group perfclass_attr_group = {
. attrs = perfclass_attrs ,
. name = " perf_counters " ,
} ;
static int __init perf_counter_sysfs_init ( void )
{
return sysfs_create_group ( & cpu_sysdev_class . kset . kobj ,
& perfclass_attr_group ) ;
}
device_initcall ( perf_counter_sysfs_init ) ;