iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/sound/soc/meson/axg-frddr.c

396 lines
14 KiB
C
Raw Normal View History

ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 17:42:52 +02:00
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Copyright (c) 2018 BayLibre, SAS.
// Author: Jerome Brunet <jbrunet@baylibre.com>
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
/*
* This driver implements the frontend playback DAI of AXG and G12A based SoCs
*/
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 17:42:52 +02:00
#include <linux/clk.h>
#include <linux/regmap.h>
#include <linux/module.h>
#include <linux/of_platform.h>
ASoC: meson: axg-frddr: set fifo depth according to the period When the period is small, using all the FRDDR fifo depth increases the latency of the playback because the following device won't start pulling data until the fifo reaches the depth set. We can adjust this depth so trim it down for small periods. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210407145714.311138-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-07 16:57:14 +02:00
#include <sound/pcm_params.h>
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 17:42:52 +02:00
#include <sound/soc.h>
#include <sound/soc-dai.h>
#include "axg-fifo.h"
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
#define CTRL0_FRDDR_PP_MODE BIT(30)
#define CTRL0_SEL1_EN_SHIFT 3
#define CTRL0_SEL2_SHIFT 4
#define CTRL0_SEL2_EN_SHIFT 7
#define CTRL0_SEL3_SHIFT 8
#define CTRL0_SEL3_EN_SHIFT 11
#define CTRL1_FRDDR_FORCE_FINISH BIT(12)
ASoC: meson: axg-frddr: add sm1 support On sm1, the output routing bits have moved to CTRL2 register Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-7-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 14:01:18 +02:00
#define CTRL2_SEL1_SHIFT 0
#define CTRL2_SEL1_EN_SHIFT 4
#define CTRL2_SEL2_SHIFT 8
#define CTRL2_SEL2_EN_SHIFT 12
#define CTRL2_SEL3_SHIFT 16
#define CTRL2_SEL3_EN_SHIFT 20
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
static int g12a_frddr_dai_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai);
/* Reset the read pointer to the FIFO_INIT_ADDR */
regmap_update_bits(fifo->map, FIFO_CTRL1,
CTRL1_FRDDR_FORCE_FINISH, 0);
regmap_update_bits(fifo->map, FIFO_CTRL1,
CTRL1_FRDDR_FORCE_FINISH, CTRL1_FRDDR_FORCE_FINISH);
regmap_update_bits(fifo->map, FIFO_CTRL1,
CTRL1_FRDDR_FORCE_FINISH, 0);
return 0;
}
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 17:42:52 +02:00
ASoC: meson: axg-frddr: set fifo depth according to the period When the period is small, using all the FRDDR fifo depth increases the latency of the playback because the following device won't start pulling data until the fifo reaches the depth set. We can adjust this depth so trim it down for small periods. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210407145714.311138-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-07 16:57:14 +02:00
static int axg_frddr_dai_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai);
unsigned int period, depth, val;
period = params_period_bytes(params);
/* Trim the FIFO depth if the period is small to improve latency */
depth = min(period, fifo->depth);
val = (depth / AXG_FIFO_BURST) - 1;
regmap_update_bits(fifo->map, FIFO_CTRL1, CTRL1_FRDDR_DEPTH_MASK,
CTRL1_FRDDR_DEPTH(val));
return 0;
}
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 17:42:52 +02:00
static int axg_frddr_dai_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai);
int ret;
/* Enable pclk to access registers and clock the fifo ip */
ret = clk_prepare_enable(fifo->pclk);
if (ret)
return ret;
/* Apply single buffer mode to the interface */
regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_FRDDR_PP_MODE, 0);
return 0;
}
static void axg_frddr_dai_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai);
clk_disable_unprepare(fifo->pclk);
}
static int axg_frddr_pcm_new(struct snd_soc_pcm_runtime *rtd,
struct snd_soc_dai *dai)
{
return axg_fifo_pcm_new(rtd, SNDRV_PCM_STREAM_PLAYBACK);
}
static const struct snd_soc_dai_ops axg_frddr_ops = {
ASoC: meson: axg-frddr: set fifo depth according to the period When the period is small, using all the FRDDR fifo depth increases the latency of the playback because the following device won't start pulling data until the fifo reaches the depth set. We can adjust this depth so trim it down for small periods. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210407145714.311138-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-07 16:57:14 +02:00
.hw_params = axg_frddr_dai_hw_params,
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 17:42:52 +02:00
.startup = axg_frddr_dai_startup,
.shutdown = axg_frddr_dai_shutdown,
};
static struct snd_soc_dai_driver axg_frddr_dai_drv = {
.name = "FRDDR",
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.channels_max = AXG_FIFO_CH_MAX,
.rates = AXG_FIFO_RATES,
.formats = AXG_FIFO_FORMATS,
},
.ops = &axg_frddr_ops,
.pcm_new = axg_frddr_pcm_new,
};
static const char * const axg_frddr_sel_texts[] = {
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 14:01:15 +02:00
"OUT 0", "OUT 1", "OUT 2", "OUT 3", "OUT 4", "OUT 5", "OUT 6", "OUT 7",
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 17:42:52 +02:00
};
static SOC_ENUM_SINGLE_DECL(axg_frddr_sel_enum, FIFO_CTRL0, CTRL0_SEL_SHIFT,
axg_frddr_sel_texts);
static const struct snd_kcontrol_new axg_frddr_out_demux =
SOC_DAPM_ENUM("Output Sink", axg_frddr_sel_enum);
static const struct snd_soc_dapm_widget axg_frddr_dapm_widgets[] = {
SND_SOC_DAPM_DEMUX("SINK SEL", SND_SOC_NOPM, 0, 0,
&axg_frddr_out_demux),
SND_SOC_DAPM_AIF_OUT("OUT 0", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 1", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 2", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 3", NULL, 0, SND_SOC_NOPM, 0, 0),
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 14:01:15 +02:00
SND_SOC_DAPM_AIF_OUT("OUT 4", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 5", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 6", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 7", NULL, 0, SND_SOC_NOPM, 0, 0),
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 17:42:52 +02:00
};
static const struct snd_soc_dapm_route axg_frddr_dapm_routes[] = {
{ "SINK SEL", NULL, "Playback" },
{ "OUT 0", "OUT 0", "SINK SEL" },
{ "OUT 1", "OUT 1", "SINK SEL" },
{ "OUT 2", "OUT 2", "SINK SEL" },
{ "OUT 3", "OUT 3", "SINK SEL" },
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 14:01:15 +02:00
{ "OUT 4", "OUT 4", "SINK SEL" },
{ "OUT 5", "OUT 5", "SINK SEL" },
{ "OUT 6", "OUT 6", "SINK SEL" },
{ "OUT 7", "OUT 7", "SINK SEL" },
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 17:42:52 +02:00
};
static const struct snd_soc_component_driver axg_frddr_component_drv = {
.dapm_widgets = axg_frddr_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(axg_frddr_dapm_widgets),
.dapm_routes = axg_frddr_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(axg_frddr_dapm_routes),
ASoC: meson: remove snd_pcm_ops snd_pcm_ops is no longer needed. Let's use component driver callback. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87muej90e4.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-02 14:33:55 +09:00
.open = axg_fifo_pcm_open,
.close = axg_fifo_pcm_close,
.hw_params = axg_fifo_pcm_hw_params,
.hw_free = axg_fifo_pcm_hw_free,
.pointer = axg_fifo_pcm_pointer,
.trigger = axg_fifo_pcm_trigger,
ASoC: meson: Migrate to new style legacy DAI naming flag Change the legacy DAI naming flag from opting in to the new scheme (non_legacy_dai_naming), to opting out of it (legacy_dai_naming). These drivers appear to be on the CPU side of the DAI link and currently uses the legacy naming, so add the new flag. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623125250.2355471-17-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23 13:51:30 +01:00
.legacy_dai_naming = 1,
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 17:42:52 +02:00
};
static const struct axg_fifo_match_data axg_frddr_match_data = {
ASoC: meson: axg-fifo: fix fifo threshold setup On TODDR sm1, the fifo threshold register field is slightly different compared to the other SoCs. This leads to the fifo A being flushed to memory every 8kB. If the period is smaller than that, several periods are pushed to memory and notified at once. This is not ideal. Fix the register field update. With this, the fifos are flushed every 128B. We could still do better, like adapt the threshold depending on the period size, but at least it consistent across the different SoC/fifos Fixes: 5ac825c3d85e ("ASoC: meson: axg-toddr: add sm1 support") Reported-by: Alden DSouza <aldend@google.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20191218172420.1199117-2-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-18 18:24:17 +01:00
.field_threshold = REG_FIELD(FIFO_CTRL1, 16, 23),
.component_drv = &axg_frddr_component_drv,
.dai_drv = &axg_frddr_dai_drv
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 17:42:52 +02:00
};
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
static const struct snd_soc_dai_ops g12a_frddr_ops = {
.prepare = g12a_frddr_dai_prepare,
ASoC: meson: axg-frddr: fix fifo depth on g12 and sm1 Previous fifo depth patch was only tested on axg, not g12 or sm1. Of course, while adding hw_params dai callback for the axg, I forgot to do the same for g12 and sm1, leaving the depth unset and breaking playback on these SoCs. Add hw_params callback to the g12 dai_ops to fix the problem. Fixes: 6f68accaa864 ("ASoC: meson: axg-frddr: set fifo depth according to the period") Reported-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210412132256.89920-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-12 15:22:56 +02:00
.hw_params = axg_frddr_dai_hw_params,
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
.startup = axg_frddr_dai_startup,
.shutdown = axg_frddr_dai_shutdown,
};
static struct snd_soc_dai_driver g12a_frddr_dai_drv = {
.name = "FRDDR",
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.channels_max = AXG_FIFO_CH_MAX,
.rates = AXG_FIFO_RATES,
.formats = AXG_FIFO_FORMATS,
},
.ops = &g12a_frddr_ops,
.pcm_new = axg_frddr_pcm_new,
};
static SOC_ENUM_SINGLE_DECL(g12a_frddr_sel1_enum, FIFO_CTRL0, CTRL0_SEL_SHIFT,
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 14:01:15 +02:00
axg_frddr_sel_texts);
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
static SOC_ENUM_SINGLE_DECL(g12a_frddr_sel2_enum, FIFO_CTRL0, CTRL0_SEL2_SHIFT,
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 14:01:15 +02:00
axg_frddr_sel_texts);
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
static SOC_ENUM_SINGLE_DECL(g12a_frddr_sel3_enum, FIFO_CTRL0, CTRL0_SEL3_SHIFT,
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 14:01:15 +02:00
axg_frddr_sel_texts);
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
static const struct snd_kcontrol_new g12a_frddr_out1_demux =
SOC_DAPM_ENUM("Output Src 1", g12a_frddr_sel1_enum);
static const struct snd_kcontrol_new g12a_frddr_out2_demux =
SOC_DAPM_ENUM("Output Src 2", g12a_frddr_sel2_enum);
static const struct snd_kcontrol_new g12a_frddr_out3_demux =
SOC_DAPM_ENUM("Output Src 3", g12a_frddr_sel3_enum);
static const struct snd_kcontrol_new g12a_frddr_out1_enable =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL0,
CTRL0_SEL1_EN_SHIFT, 1, 0);
static const struct snd_kcontrol_new g12a_frddr_out2_enable =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL0,
CTRL0_SEL2_EN_SHIFT, 1, 0);
static const struct snd_kcontrol_new g12a_frddr_out3_enable =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL0,
CTRL0_SEL3_EN_SHIFT, 1, 0);
static const struct snd_soc_dapm_widget g12a_frddr_dapm_widgets[] = {
SND_SOC_DAPM_AIF_OUT("SRC 1", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("SRC 2", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("SRC 3", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_SWITCH("SRC 1 EN", SND_SOC_NOPM, 0, 0,
&g12a_frddr_out1_enable),
SND_SOC_DAPM_SWITCH("SRC 2 EN", SND_SOC_NOPM, 0, 0,
&g12a_frddr_out2_enable),
SND_SOC_DAPM_SWITCH("SRC 3 EN", SND_SOC_NOPM, 0, 0,
&g12a_frddr_out3_enable),
SND_SOC_DAPM_DEMUX("SINK 1 SEL", SND_SOC_NOPM, 0, 0,
&g12a_frddr_out1_demux),
SND_SOC_DAPM_DEMUX("SINK 2 SEL", SND_SOC_NOPM, 0, 0,
&g12a_frddr_out2_demux),
SND_SOC_DAPM_DEMUX("SINK 3 SEL", SND_SOC_NOPM, 0, 0,
&g12a_frddr_out3_demux),
SND_SOC_DAPM_AIF_OUT("OUT 0", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 1", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 2", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 3", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 4", NULL, 0, SND_SOC_NOPM, 0, 0),
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 14:01:15 +02:00
SND_SOC_DAPM_AIF_OUT("OUT 5", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 6", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 7", NULL, 0, SND_SOC_NOPM, 0, 0),
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
};
static const struct snd_soc_dapm_route g12a_frddr_dapm_routes[] = {
{ "SRC 1", NULL, "Playback" },
{ "SRC 2", NULL, "Playback" },
{ "SRC 3", NULL, "Playback" },
{ "SRC 1 EN", "Switch", "SRC 1" },
{ "SRC 2 EN", "Switch", "SRC 2" },
{ "SRC 3 EN", "Switch", "SRC 3" },
{ "SINK 1 SEL", NULL, "SRC 1 EN" },
{ "SINK 2 SEL", NULL, "SRC 2 EN" },
{ "SINK 3 SEL", NULL, "SRC 3 EN" },
{ "OUT 0", "OUT 0", "SINK 1 SEL" },
{ "OUT 1", "OUT 1", "SINK 1 SEL" },
{ "OUT 2", "OUT 2", "SINK 1 SEL" },
{ "OUT 3", "OUT 3", "SINK 1 SEL" },
{ "OUT 4", "OUT 4", "SINK 1 SEL" },
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 14:01:15 +02:00
{ "OUT 5", "OUT 5", "SINK 1 SEL" },
{ "OUT 6", "OUT 6", "SINK 1 SEL" },
{ "OUT 7", "OUT 7", "SINK 1 SEL" },
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
{ "OUT 0", "OUT 0", "SINK 2 SEL" },
{ "OUT 1", "OUT 1", "SINK 2 SEL" },
{ "OUT 2", "OUT 2", "SINK 2 SEL" },
{ "OUT 3", "OUT 3", "SINK 2 SEL" },
{ "OUT 4", "OUT 4", "SINK 2 SEL" },
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 14:01:15 +02:00
{ "OUT 5", "OUT 5", "SINK 2 SEL" },
{ "OUT 6", "OUT 6", "SINK 2 SEL" },
{ "OUT 7", "OUT 7", "SINK 2 SEL" },
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
{ "OUT 0", "OUT 0", "SINK 3 SEL" },
{ "OUT 1", "OUT 1", "SINK 3 SEL" },
{ "OUT 2", "OUT 2", "SINK 3 SEL" },
{ "OUT 3", "OUT 3", "SINK 3 SEL" },
{ "OUT 4", "OUT 4", "SINK 3 SEL" },
ASoC: meson: axg-frddr: expose all 8 outputs The FRDDR component, as it, has a maximum of 8 outputs. Depending on the SoC, these may not all be connected. Instead of decribing only the connected outputs of each SoC, describe them all and let ASoC routing do the rest. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 14:01:15 +02:00
{ "OUT 5", "OUT 5", "SINK 3 SEL" },
{ "OUT 6", "OUT 6", "SINK 3 SEL" },
{ "OUT 7", "OUT 7", "SINK 3 SEL" },
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
};
static const struct snd_soc_component_driver g12a_frddr_component_drv = {
.dapm_widgets = g12a_frddr_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(g12a_frddr_dapm_widgets),
.dapm_routes = g12a_frddr_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(g12a_frddr_dapm_routes),
ASoC: meson: remove snd_pcm_ops snd_pcm_ops is no longer needed. Let's use component driver callback. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87muej90e4.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-02 14:33:55 +09:00
.open = axg_fifo_pcm_open,
.close = axg_fifo_pcm_close,
.hw_params = g12a_fifo_pcm_hw_params,
.hw_free = axg_fifo_pcm_hw_free,
.pointer = axg_fifo_pcm_pointer,
.trigger = axg_fifo_pcm_trigger,
ASoC: meson: Migrate to new style legacy DAI naming flag Change the legacy DAI naming flag from opting in to the new scheme (non_legacy_dai_naming), to opting out of it (legacy_dai_naming). These drivers appear to be on the CPU side of the DAI link and currently uses the legacy naming, so add the new flag. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623125250.2355471-17-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23 13:51:30 +01:00
.legacy_dai_naming = 1,
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
};
static const struct axg_fifo_match_data g12a_frddr_match_data = {
ASoC: meson: axg-fifo: fix fifo threshold setup On TODDR sm1, the fifo threshold register field is slightly different compared to the other SoCs. This leads to the fifo A being flushed to memory every 8kB. If the period is smaller than that, several periods are pushed to memory and notified at once. This is not ideal. Fix the register field update. With this, the fifos are flushed every 128B. We could still do better, like adapt the threshold depending on the period size, but at least it consistent across the different SoC/fifos Fixes: 5ac825c3d85e ("ASoC: meson: axg-toddr: add sm1 support") Reported-by: Alden DSouza <aldend@google.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20191218172420.1199117-2-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-18 18:24:17 +01:00
.field_threshold = REG_FIELD(FIFO_CTRL1, 16, 23),
.component_drv = &g12a_frddr_component_drv,
.dai_drv = &g12a_frddr_dai_drv
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
};
ASoC: meson: axg-frddr: add sm1 support On sm1, the output routing bits have moved to CTRL2 register Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-7-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 14:01:18 +02:00
/* On SM1, the output selection in on CTRL2 */
static const struct snd_kcontrol_new sm1_frddr_out1_enable =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL2,
CTRL2_SEL1_EN_SHIFT, 1, 0);
static const struct snd_kcontrol_new sm1_frddr_out2_enable =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL2,
CTRL2_SEL2_EN_SHIFT, 1, 0);
static const struct snd_kcontrol_new sm1_frddr_out3_enable =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL2,
CTRL2_SEL3_EN_SHIFT, 1, 0);
static SOC_ENUM_SINGLE_DECL(sm1_frddr_sel1_enum, FIFO_CTRL2, CTRL2_SEL1_SHIFT,
axg_frddr_sel_texts);
static SOC_ENUM_SINGLE_DECL(sm1_frddr_sel2_enum, FIFO_CTRL2, CTRL2_SEL2_SHIFT,
axg_frddr_sel_texts);
static SOC_ENUM_SINGLE_DECL(sm1_frddr_sel3_enum, FIFO_CTRL2, CTRL2_SEL3_SHIFT,
axg_frddr_sel_texts);
static const struct snd_kcontrol_new sm1_frddr_out1_demux =
SOC_DAPM_ENUM("Output Src 1", sm1_frddr_sel1_enum);
static const struct snd_kcontrol_new sm1_frddr_out2_demux =
SOC_DAPM_ENUM("Output Src 2", sm1_frddr_sel2_enum);
static const struct snd_kcontrol_new sm1_frddr_out3_demux =
SOC_DAPM_ENUM("Output Src 3", sm1_frddr_sel3_enum);
static const struct snd_soc_dapm_widget sm1_frddr_dapm_widgets[] = {
SND_SOC_DAPM_AIF_OUT("SRC 1", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("SRC 2", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("SRC 3", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_SWITCH("SRC 1 EN", SND_SOC_NOPM, 0, 0,
&sm1_frddr_out1_enable),
SND_SOC_DAPM_SWITCH("SRC 2 EN", SND_SOC_NOPM, 0, 0,
&sm1_frddr_out2_enable),
SND_SOC_DAPM_SWITCH("SRC 3 EN", SND_SOC_NOPM, 0, 0,
&sm1_frddr_out3_enable),
SND_SOC_DAPM_DEMUX("SINK 1 SEL", SND_SOC_NOPM, 0, 0,
&sm1_frddr_out1_demux),
SND_SOC_DAPM_DEMUX("SINK 2 SEL", SND_SOC_NOPM, 0, 0,
&sm1_frddr_out2_demux),
SND_SOC_DAPM_DEMUX("SINK 3 SEL", SND_SOC_NOPM, 0, 0,
&sm1_frddr_out3_demux),
SND_SOC_DAPM_AIF_OUT("OUT 0", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 1", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 2", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 3", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 4", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 5", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 6", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("OUT 7", NULL, 0, SND_SOC_NOPM, 0, 0),
};
static const struct snd_soc_component_driver sm1_frddr_component_drv = {
.dapm_widgets = sm1_frddr_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(sm1_frddr_dapm_widgets),
.dapm_routes = g12a_frddr_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(g12a_frddr_dapm_routes),
ASoC: meson: remove snd_pcm_ops snd_pcm_ops is no longer needed. Let's use component driver callback. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87muej90e4.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-02 14:33:55 +09:00
.open = axg_fifo_pcm_open,
.close = axg_fifo_pcm_close,
.hw_params = g12a_fifo_pcm_hw_params,
.hw_free = axg_fifo_pcm_hw_free,
.pointer = axg_fifo_pcm_pointer,
.trigger = axg_fifo_pcm_trigger,
ASoC: meson: Migrate to new style legacy DAI naming flag Change the legacy DAI naming flag from opting in to the new scheme (non_legacy_dai_naming), to opting out of it (legacy_dai_naming). These drivers appear to be on the CPU side of the DAI link and currently uses the legacy naming, so add the new flag. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623125250.2355471-17-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23 13:51:30 +01:00
.legacy_dai_naming = 1,
ASoC: meson: axg-frddr: add sm1 support On sm1, the output routing bits have moved to CTRL2 register Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-7-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 14:01:18 +02:00
};
static const struct axg_fifo_match_data sm1_frddr_match_data = {
ASoC: meson: axg-fifo: fix fifo threshold setup On TODDR sm1, the fifo threshold register field is slightly different compared to the other SoCs. This leads to the fifo A being flushed to memory every 8kB. If the period is smaller than that, several periods are pushed to memory and notified at once. This is not ideal. Fix the register field update. With this, the fifos are flushed every 128B. We could still do better, like adapt the threshold depending on the period size, but at least it consistent across the different SoC/fifos Fixes: 5ac825c3d85e ("ASoC: meson: axg-toddr: add sm1 support") Reported-by: Alden DSouza <aldend@google.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20191218172420.1199117-2-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-18 18:24:17 +01:00
.field_threshold = REG_FIELD(FIFO_CTRL1, 16, 23),
.component_drv = &sm1_frddr_component_drv,
.dai_drv = &g12a_frddr_dai_drv
ASoC: meson: axg-frddr: add sm1 support On sm1, the output routing bits have moved to CTRL2 register Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-7-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 14:01:18 +02:00
};
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 17:42:52 +02:00
static const struct of_device_id axg_frddr_of_match[] = {
{
.compatible = "amlogic,axg-frddr",
.data = &axg_frddr_match_data,
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
}, {
.compatible = "amlogic,g12a-frddr",
.data = &g12a_frddr_match_data,
ASoC: meson: axg-frddr: add sm1 support On sm1, the output routing bits have moved to CTRL2 register Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20190905120120.31752-7-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 14:01:18 +02:00
}, {
.compatible = "amlogic,sm1-frddr",
.data = &sm1_frddr_match_data,
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 17:42:52 +02:00
}, {}
};
MODULE_DEVICE_TABLE(of, axg_frddr_of_match);
static struct platform_driver axg_frddr_pdrv = {
.probe = axg_fifo_probe,
.driver = {
.name = "axg-frddr",
.of_match_table = axg_frddr_of_match,
},
};
module_platform_driver(axg_frddr_pdrv);
ASoC: meson: axg-frddr: add g12a support On the axg, frddr could only be connected to 1 downstream element, so the playback was possible on 1 interface only at a time. On the g12a, the frddr may connect and wait for the request of up to 3 downstream elements. With this, it possible for single playback to be played on several interfaces at the same time. Like the toddr fifo, the g12a frddr also need to take care of resetting the read pointer to the initial fifo address when preparing a playback. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-04 13:17:31 +02:00
MODULE_DESCRIPTION("Amlogic AXG/G12A playback fifo driver");
ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-17 17:42:52 +02:00
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
MODULE_LICENSE("GPL v2");
Reference in New Issue Copy Permalink