linux/include/clocksource/timer-ti-dm.h

/*
 * OMAP Dual-Mode Timers
 *
 * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
 * Tarun Kanti DebBarma <tarun.kanti@ti.com>
 * Thara Gopinath <thara@ti.com>
 *
 * Platform device conversion and hwmod support.
 *
 * Copyright (C) 2005 Nokia Corporation
 * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
 * PWM and clock framwork support by Timo Teras.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * You should have received a copy of the  GNU General Public License along
 * with this program; if not, write  to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/delay.h>
#include <linux/io.h>
#include <linux/platform_device.h>

#ifndef __CLOCKSOURCE_DMTIMER_H
#define __CLOCKSOURCE_DMTIMER_H

/* clock sources */
#define OMAP_TIMER_SRC_SYS_CLK			0x00
#define OMAP_TIMER_SRC_32_KHZ			0x01
#define OMAP_TIMER_SRC_EXT_CLK			0x02

/* timer interrupt enable bits */
#define OMAP_TIMER_INT_CAPTURE			(1 << 2)
#define OMAP_TIMER_INT_OVERFLOW			(1 << 1)
#define OMAP_TIMER_INT_MATCH			(1 << 0)

/* trigger types */
#define OMAP_TIMER_TRIGGER_NONE			0x00
#define OMAP_TIMER_TRIGGER_OVERFLOW		0x01
#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02

/* timer capabilities used in hwmod database */
#define OMAP_TIMER_SECURE				0x80000000
#define OMAP_TIMER_ALWON				0x40000000
#define OMAP_TIMER_HAS_PWM				0x20000000
#define OMAP_TIMER_NEEDS_RESET				0x10000000
#define OMAP_TIMER_HAS_DSP_IRQ				0x08000000

struct omap_dm_timer {
};

u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);

/*
 * Do not use the defines below, they are not needed. They should be only
 * used by dmtimer.c and sys_timer related code.
 */

/*
 * The interrupt registers are different between v1 and v2 ip.
 * These registers are offsets from timer->iobase.
 */
#define OMAP_TIMER_ID_OFFSET		0x00
#define OMAP_TIMER_OCP_CFG_OFFSET	0x10

#define OMAP_TIMER_V1_SYS_STAT_OFFSET	0x14
#define OMAP_TIMER_V1_STAT_OFFSET	0x18
#define OMAP_TIMER_V1_INT_EN_OFFSET	0x1c

#define OMAP_TIMER_V2_IRQSTATUS_RAW	0x24
#define OMAP_TIMER_V2_IRQSTATUS		0x28
#define OMAP_TIMER_V2_IRQENABLE_SET	0x2c
#define OMAP_TIMER_V2_IRQENABLE_CLR	0x30

/*
 * The functional registers have a different base on v1 and v2 ip.
 * These registers are offsets from timer->func_base. The func_base
 * is samae as io_base for v1 and io_base + 0x14 for v2 ip.
 *
 */
#define OMAP_TIMER_V2_FUNC_OFFSET		0x14

#define _OMAP_TIMER_WAKEUP_EN_OFFSET	0x20
#define _OMAP_TIMER_CTRL_OFFSET		0x24
#define		OMAP_TIMER_CTRL_GPOCFG		(1 << 14)
#define		OMAP_TIMER_CTRL_CAPTMODE	(1 << 13)
#define		OMAP_TIMER_CTRL_PT		(1 << 12)
#define		OMAP_TIMER_CTRL_TCM_LOWTOHIGH	(0x1 << 8)
#define		OMAP_TIMER_CTRL_TCM_HIGHTOLOW	(0x2 << 8)
#define		OMAP_TIMER_CTRL_TCM_BOTHEDGES	(0x3 << 8)
#define		OMAP_TIMER_CTRL_SCPWM		(1 << 7)
#define		OMAP_TIMER_CTRL_CE		(1 << 6) /* compare enable */
#define		OMAP_TIMER_CTRL_PRE		(1 << 5) /* prescaler enable */
#define		OMAP_TIMER_CTRL_PTV_SHIFT	2 /* prescaler value shift */
#define		OMAP_TIMER_CTRL_POSTED		(1 << 2)
#define		OMAP_TIMER_CTRL_AR		(1 << 1) /* auto-reload enable */
#define		OMAP_TIMER_CTRL_ST		(1 << 0) /* start timer */
#define _OMAP_TIMER_COUNTER_OFFSET	0x28
#define _OMAP_TIMER_LOAD_OFFSET		0x2c
#define _OMAP_TIMER_TRIGGER_OFFSET	0x30
#define _OMAP_TIMER_WRITE_PEND_OFFSET	0x34
#define		WP_NONE			0	/* no write pending bit */
#define		WP_TCLR			(1 << 0)
#define		WP_TCRR			(1 << 1)
#define		WP_TLDR			(1 << 2)
#define		WP_TTGR			(1 << 3)
#define		WP_TMAR			(1 << 4)
#define		WP_TPIR			(1 << 5)
#define		WP_TNIR			(1 << 6)
#define		WP_TCVR			(1 << 7)
#define		WP_TOCR			(1 << 8)
#define		WP_TOWR			(1 << 9)
#define _OMAP_TIMER_MATCH_OFFSET	0x38
#define _OMAP_TIMER_CAPTURE_OFFSET	0x3c
#define _OMAP_TIMER_IF_CTRL_OFFSET	0x40
#define _OMAP_TIMER_CAPTURE2_OFFSET		0x44	/* TCAR2, 34xx only */
#define _OMAP_TIMER_TICK_POS_OFFSET		0x48	/* TPIR, 34xx only */
#define _OMAP_TIMER_TICK_NEG_OFFSET		0x4c	/* TNIR, 34xx only */
#define _OMAP_TIMER_TICK_COUNT_OFFSET		0x50	/* TCVR, 34xx only */
#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET	0x54	/* TOCR, 34xx only */
#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET	0x58	/* TOWR, 34xx only */

#endif /* __CLOCKSOURCE_DMTIMER_H */