2005-04-16 15:20:36 -07:00
/*
* Copyright ( C ) 2000 , 2001 Jeff Dike ( jdike @ karaya . com )
* Licensed under the GPL
*/
# include "linux/kernel.h"
# include "asm/errno.h"
# include "linux/sched.h"
# include "linux/mm.h"
# include "linux/spinlock.h"
# include "linux/config.h"
# include "linux/init.h"
# include "linux/ptrace.h"
# include "asm/semaphore.h"
# include "asm/pgtable.h"
# include "asm/pgalloc.h"
# include "asm/tlbflush.h"
# include "asm/a.out.h"
# include "asm/current.h"
# include "asm/irq.h"
# include "user_util.h"
# include "kern_util.h"
# include "kern.h"
# include "chan_kern.h"
# include "mconsole_kern.h"
# include "2_5compat.h"
# include "mem.h"
# include "mem_kern.h"
int handle_page_fault ( unsigned long address , unsigned long ip ,
int is_write , int is_user , int * code_out )
{
struct mm_struct * mm = current - > mm ;
struct vm_area_struct * vma ;
pgd_t * pgd ;
pud_t * pud ;
pmd_t * pmd ;
pte_t * pte ;
unsigned long page ;
int err = - EFAULT ;
* code_out = SEGV_MAPERR ;
down_read ( & mm - > mmap_sem ) ;
vma = find_vma ( mm , address ) ;
if ( ! vma )
goto out ;
else if ( vma - > vm_start < = address )
goto good_area ;
else if ( ! ( vma - > vm_flags & VM_GROWSDOWN ) )
goto out ;
2005-05-06 21:30:55 -07:00
else if ( is_user & & ! ARCH_IS_STACKGROW ( address ) )
2005-04-16 15:20:36 -07:00
goto out ;
else if ( expand_stack ( vma , address ) )
goto out ;
good_area :
* code_out = SEGV_ACCERR ;
if ( is_write & & ! ( vma - > vm_flags & VM_WRITE ) )
goto out ;
2005-05-20 13:59:08 -07:00
if ( ! ( vma - > vm_flags & ( VM_READ | VM_EXEC ) ) )
goto out ;
2005-04-16 15:20:36 -07:00
page = address & PAGE_MASK ;
do {
survive :
switch ( handle_mm_fault ( mm , vma , address , is_write ) ) {
case VM_FAULT_MINOR :
current - > min_flt + + ;
break ;
case VM_FAULT_MAJOR :
current - > maj_flt + + ;
break ;
case VM_FAULT_SIGBUS :
err = - EACCES ;
goto out ;
case VM_FAULT_OOM :
err = - ENOMEM ;
goto out_of_memory ;
default :
BUG ( ) ;
}
pgd = pgd_offset ( mm , page ) ;
pud = pud_offset ( pgd , page ) ;
pmd = pmd_offset ( pud , page ) ;
pte = pte_offset_kernel ( pmd , page ) ;
} while ( ! pte_present ( * pte ) ) ;
err = 0 ;
* pte = pte_mkyoung ( * pte ) ;
if ( pte_write ( * pte ) ) * pte = pte_mkdirty ( * pte ) ;
flush_tlb_page ( vma , page ) ;
out :
up_read ( & mm - > mmap_sem ) ;
return ( err ) ;
/*
* We ran out of memory , or some other thing happened to us that made
* us unable to handle the page fault gracefully .
*/
out_of_memory :
if ( current - > pid = = 1 ) {
up_read ( & mm - > mmap_sem ) ;
yield ( ) ;
down_read ( & mm - > mmap_sem ) ;
goto survive ;
}
goto out ;
}
[PATCH] uml: S390 preparation, abstract host page fault data
This patch removes the arch-specific fault/trap-infos from thread and
skas-regs.
It adds a new struct faultinfo, that is arch-specific defined in
sysdep/faultinfo.h.
The structure is inserted in thread.arch and thread.regs.skas and
thread.regs.tt
Now, segv and other trap-handlers can copy the contents from regs.X.faultinfo
to thread.arch.faultinfo with one simple assignment.
Also, the number of macros necessary is reduced to
FAULT_ADDRESS(struct faultinfo)
extracts the faulting address from faultinfo
FAULT_WRITE(struct faultinfo)
extracts the "is_write" flag
SEGV_IS_FIXABLE(struct faultinfo)
is true for the fixable segvs, i.e. (TRAP == 14)
on i386
UPT_FAULTINFO(regs)
result is (struct faultinfo *) to the faultinfo
in regs->skas.faultinfo
GET_FAULTINFO_FROM_SC(struct faultinfo, struct sigcontext *)
copies the relevant parts of the sigcontext to
struct faultinfo.
On SIGSEGV, call user_signal() instead of handle_segv(), if the architecture
provides the information needed in PTRACE_FAULTINFO, or if PTRACE_FAULTINFO is
missing, because segv-stub will provide the info.
The benefit of the change is, that in case of a non-fixable SIGSEGV, we can
give user processes a SIGSEGV, instead of possibly looping on pagefault
handling.
Since handle_segv() sikked arch_fixup() implicitly by passing ip==0 to segv(),
I changed segv() to call arch_fixup() only, if !is_user.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:15:31 -07:00
/*
* We give a * copy * of the faultinfo in the regs to segv .
* This must be done , since nesting SEGVs could overwrite
* the info in the regs . A pointer to the info then would
* give us bad data !
*/
unsigned long segv ( struct faultinfo fi , unsigned long ip , int is_user , void * sc )
2005-04-16 15:20:36 -07:00
{
struct siginfo si ;
void * catcher ;
int err ;
[PATCH] uml: S390 preparation, abstract host page fault data
This patch removes the arch-specific fault/trap-infos from thread and
skas-regs.
It adds a new struct faultinfo, that is arch-specific defined in
sysdep/faultinfo.h.
The structure is inserted in thread.arch and thread.regs.skas and
thread.regs.tt
Now, segv and other trap-handlers can copy the contents from regs.X.faultinfo
to thread.arch.faultinfo with one simple assignment.
Also, the number of macros necessary is reduced to
FAULT_ADDRESS(struct faultinfo)
extracts the faulting address from faultinfo
FAULT_WRITE(struct faultinfo)
extracts the "is_write" flag
SEGV_IS_FIXABLE(struct faultinfo)
is true for the fixable segvs, i.e. (TRAP == 14)
on i386
UPT_FAULTINFO(regs)
result is (struct faultinfo *) to the faultinfo
in regs->skas.faultinfo
GET_FAULTINFO_FROM_SC(struct faultinfo, struct sigcontext *)
copies the relevant parts of the sigcontext to
struct faultinfo.
On SIGSEGV, call user_signal() instead of handle_segv(), if the architecture
provides the information needed in PTRACE_FAULTINFO, or if PTRACE_FAULTINFO is
missing, because segv-stub will provide the info.
The benefit of the change is, that in case of a non-fixable SIGSEGV, we can
give user processes a SIGSEGV, instead of possibly looping on pagefault
handling.
Since handle_segv() sikked arch_fixup() implicitly by passing ip==0 to segv(),
I changed segv() to call arch_fixup() only, if !is_user.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:15:31 -07:00
int is_write = FAULT_WRITE ( fi ) ;
unsigned long address = FAULT_ADDRESS ( fi ) ;
2005-04-16 15:20:36 -07:00
if ( ! is_user & & ( address > = start_vm ) & & ( address < end_vm ) ) {
flush_tlb_kernel_vm ( ) ;
return ( 0 ) ;
}
else if ( current - > mm = = NULL )
panic ( " Segfault with no mm " ) ;
err = handle_page_fault ( address , ip , is_write , is_user , & si . si_code ) ;
catcher = current - > thread . fault_catcher ;
if ( ! err )
return ( 0 ) ;
else if ( catcher ! = NULL ) {
current - > thread . fault_addr = ( void * ) address ;
do_longjmp ( catcher , 1 ) ;
}
else if ( current - > thread . fault_addr ! = NULL )
panic ( " fault_addr set but no fault catcher " ) ;
[PATCH] uml: S390 preparation, abstract host page fault data
This patch removes the arch-specific fault/trap-infos from thread and
skas-regs.
It adds a new struct faultinfo, that is arch-specific defined in
sysdep/faultinfo.h.
The structure is inserted in thread.arch and thread.regs.skas and
thread.regs.tt
Now, segv and other trap-handlers can copy the contents from regs.X.faultinfo
to thread.arch.faultinfo with one simple assignment.
Also, the number of macros necessary is reduced to
FAULT_ADDRESS(struct faultinfo)
extracts the faulting address from faultinfo
FAULT_WRITE(struct faultinfo)
extracts the "is_write" flag
SEGV_IS_FIXABLE(struct faultinfo)
is true for the fixable segvs, i.e. (TRAP == 14)
on i386
UPT_FAULTINFO(regs)
result is (struct faultinfo *) to the faultinfo
in regs->skas.faultinfo
GET_FAULTINFO_FROM_SC(struct faultinfo, struct sigcontext *)
copies the relevant parts of the sigcontext to
struct faultinfo.
On SIGSEGV, call user_signal() instead of handle_segv(), if the architecture
provides the information needed in PTRACE_FAULTINFO, or if PTRACE_FAULTINFO is
missing, because segv-stub will provide the info.
The benefit of the change is, that in case of a non-fixable SIGSEGV, we can
give user processes a SIGSEGV, instead of possibly looping on pagefault
handling.
Since handle_segv() sikked arch_fixup() implicitly by passing ip==0 to segv(),
I changed segv() to call arch_fixup() only, if !is_user.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:15:31 -07:00
else if ( ! is_user & & arch_fixup ( ip , sc ) )
2005-04-16 15:20:36 -07:00
return ( 0 ) ;
if ( ! is_user )
panic ( " Kernel mode fault at addr 0x%lx, ip 0x%lx " ,
address , ip ) ;
if ( err = = - EACCES ) {
si . si_signo = SIGBUS ;
si . si_errno = 0 ;
si . si_code = BUS_ADRERR ;
si . si_addr = ( void * ) address ;
[PATCH] uml: S390 preparation, abstract host page fault data
This patch removes the arch-specific fault/trap-infos from thread and
skas-regs.
It adds a new struct faultinfo, that is arch-specific defined in
sysdep/faultinfo.h.
The structure is inserted in thread.arch and thread.regs.skas and
thread.regs.tt
Now, segv and other trap-handlers can copy the contents from regs.X.faultinfo
to thread.arch.faultinfo with one simple assignment.
Also, the number of macros necessary is reduced to
FAULT_ADDRESS(struct faultinfo)
extracts the faulting address from faultinfo
FAULT_WRITE(struct faultinfo)
extracts the "is_write" flag
SEGV_IS_FIXABLE(struct faultinfo)
is true for the fixable segvs, i.e. (TRAP == 14)
on i386
UPT_FAULTINFO(regs)
result is (struct faultinfo *) to the faultinfo
in regs->skas.faultinfo
GET_FAULTINFO_FROM_SC(struct faultinfo, struct sigcontext *)
copies the relevant parts of the sigcontext to
struct faultinfo.
On SIGSEGV, call user_signal() instead of handle_segv(), if the architecture
provides the information needed in PTRACE_FAULTINFO, or if PTRACE_FAULTINFO is
missing, because segv-stub will provide the info.
The benefit of the change is, that in case of a non-fixable SIGSEGV, we can
give user processes a SIGSEGV, instead of possibly looping on pagefault
handling.
Since handle_segv() sikked arch_fixup() implicitly by passing ip==0 to segv(),
I changed segv() to call arch_fixup() only, if !is_user.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:15:31 -07:00
current - > thread . arch . faultinfo = fi ;
2005-04-16 15:20:36 -07:00
force_sig_info ( SIGBUS , & si , current ) ;
}
else if ( err = = - ENOMEM ) {
printk ( " VM: killing process %s \n " , current - > comm ) ;
do_exit ( SIGKILL ) ;
}
else {
si . si_signo = SIGSEGV ;
si . si_addr = ( void * ) address ;
[PATCH] uml: S390 preparation, abstract host page fault data
This patch removes the arch-specific fault/trap-infos from thread and
skas-regs.
It adds a new struct faultinfo, that is arch-specific defined in
sysdep/faultinfo.h.
The structure is inserted in thread.arch and thread.regs.skas and
thread.regs.tt
Now, segv and other trap-handlers can copy the contents from regs.X.faultinfo
to thread.arch.faultinfo with one simple assignment.
Also, the number of macros necessary is reduced to
FAULT_ADDRESS(struct faultinfo)
extracts the faulting address from faultinfo
FAULT_WRITE(struct faultinfo)
extracts the "is_write" flag
SEGV_IS_FIXABLE(struct faultinfo)
is true for the fixable segvs, i.e. (TRAP == 14)
on i386
UPT_FAULTINFO(regs)
result is (struct faultinfo *) to the faultinfo
in regs->skas.faultinfo
GET_FAULTINFO_FROM_SC(struct faultinfo, struct sigcontext *)
copies the relevant parts of the sigcontext to
struct faultinfo.
On SIGSEGV, call user_signal() instead of handle_segv(), if the architecture
provides the information needed in PTRACE_FAULTINFO, or if PTRACE_FAULTINFO is
missing, because segv-stub will provide the info.
The benefit of the change is, that in case of a non-fixable SIGSEGV, we can
give user processes a SIGSEGV, instead of possibly looping on pagefault
handling.
Since handle_segv() sikked arch_fixup() implicitly by passing ip==0 to segv(),
I changed segv() to call arch_fixup() only, if !is_user.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:15:31 -07:00
current - > thread . arch . faultinfo = fi ;
2005-04-16 15:20:36 -07:00
force_sig_info ( SIGSEGV , & si , current ) ;
}
return ( 0 ) ;
}
[PATCH] uml: S390 preparation, abstract host page fault data
This patch removes the arch-specific fault/trap-infos from thread and
skas-regs.
It adds a new struct faultinfo, that is arch-specific defined in
sysdep/faultinfo.h.
The structure is inserted in thread.arch and thread.regs.skas and
thread.regs.tt
Now, segv and other trap-handlers can copy the contents from regs.X.faultinfo
to thread.arch.faultinfo with one simple assignment.
Also, the number of macros necessary is reduced to
FAULT_ADDRESS(struct faultinfo)
extracts the faulting address from faultinfo
FAULT_WRITE(struct faultinfo)
extracts the "is_write" flag
SEGV_IS_FIXABLE(struct faultinfo)
is true for the fixable segvs, i.e. (TRAP == 14)
on i386
UPT_FAULTINFO(regs)
result is (struct faultinfo *) to the faultinfo
in regs->skas.faultinfo
GET_FAULTINFO_FROM_SC(struct faultinfo, struct sigcontext *)
copies the relevant parts of the sigcontext to
struct faultinfo.
On SIGSEGV, call user_signal() instead of handle_segv(), if the architecture
provides the information needed in PTRACE_FAULTINFO, or if PTRACE_FAULTINFO is
missing, because segv-stub will provide the info.
The benefit of the change is, that in case of a non-fixable SIGSEGV, we can
give user processes a SIGSEGV, instead of possibly looping on pagefault
handling.
Since handle_segv() sikked arch_fixup() implicitly by passing ip==0 to segv(),
I changed segv() to call arch_fixup() only, if !is_user.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:15:31 -07:00
void bad_segv ( struct faultinfo fi , unsigned long ip )
2005-04-16 15:20:36 -07:00
{
struct siginfo si ;
si . si_signo = SIGSEGV ;
si . si_code = SEGV_ACCERR ;
[PATCH] uml: S390 preparation, abstract host page fault data
This patch removes the arch-specific fault/trap-infos from thread and
skas-regs.
It adds a new struct faultinfo, that is arch-specific defined in
sysdep/faultinfo.h.
The structure is inserted in thread.arch and thread.regs.skas and
thread.regs.tt
Now, segv and other trap-handlers can copy the contents from regs.X.faultinfo
to thread.arch.faultinfo with one simple assignment.
Also, the number of macros necessary is reduced to
FAULT_ADDRESS(struct faultinfo)
extracts the faulting address from faultinfo
FAULT_WRITE(struct faultinfo)
extracts the "is_write" flag
SEGV_IS_FIXABLE(struct faultinfo)
is true for the fixable segvs, i.e. (TRAP == 14)
on i386
UPT_FAULTINFO(regs)
result is (struct faultinfo *) to the faultinfo
in regs->skas.faultinfo
GET_FAULTINFO_FROM_SC(struct faultinfo, struct sigcontext *)
copies the relevant parts of the sigcontext to
struct faultinfo.
On SIGSEGV, call user_signal() instead of handle_segv(), if the architecture
provides the information needed in PTRACE_FAULTINFO, or if PTRACE_FAULTINFO is
missing, because segv-stub will provide the info.
The benefit of the change is, that in case of a non-fixable SIGSEGV, we can
give user processes a SIGSEGV, instead of possibly looping on pagefault
handling.
Since handle_segv() sikked arch_fixup() implicitly by passing ip==0 to segv(),
I changed segv() to call arch_fixup() only, if !is_user.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:15:31 -07:00
si . si_addr = ( void * ) FAULT_ADDRESS ( fi ) ;
current - > thread . arch . faultinfo = fi ;
2005-04-16 15:20:36 -07:00
force_sig_info ( SIGSEGV , & si , current ) ;
}
void relay_signal ( int sig , union uml_pt_regs * regs )
{
if ( arch_handle_signal ( sig , regs ) ) return ;
if ( ! UPT_IS_USER ( regs ) )
panic ( " Kernel mode signal %d " , sig ) ;
[PATCH] uml: S390 preparation, abstract host page fault data
This patch removes the arch-specific fault/trap-infos from thread and
skas-regs.
It adds a new struct faultinfo, that is arch-specific defined in
sysdep/faultinfo.h.
The structure is inserted in thread.arch and thread.regs.skas and
thread.regs.tt
Now, segv and other trap-handlers can copy the contents from regs.X.faultinfo
to thread.arch.faultinfo with one simple assignment.
Also, the number of macros necessary is reduced to
FAULT_ADDRESS(struct faultinfo)
extracts the faulting address from faultinfo
FAULT_WRITE(struct faultinfo)
extracts the "is_write" flag
SEGV_IS_FIXABLE(struct faultinfo)
is true for the fixable segvs, i.e. (TRAP == 14)
on i386
UPT_FAULTINFO(regs)
result is (struct faultinfo *) to the faultinfo
in regs->skas.faultinfo
GET_FAULTINFO_FROM_SC(struct faultinfo, struct sigcontext *)
copies the relevant parts of the sigcontext to
struct faultinfo.
On SIGSEGV, call user_signal() instead of handle_segv(), if the architecture
provides the information needed in PTRACE_FAULTINFO, or if PTRACE_FAULTINFO is
missing, because segv-stub will provide the info.
The benefit of the change is, that in case of a non-fixable SIGSEGV, we can
give user processes a SIGSEGV, instead of possibly looping on pagefault
handling.
Since handle_segv() sikked arch_fixup() implicitly by passing ip==0 to segv(),
I changed segv() to call arch_fixup() only, if !is_user.
Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:15:31 -07:00
current - > thread . arch . faultinfo = * UPT_FAULTINFO ( regs ) ;
2005-04-16 15:20:36 -07:00
force_sig ( sig , current ) ;
}
void bus_handler ( int sig , union uml_pt_regs * regs )
{
if ( current - > thread . fault_catcher ! = NULL )
do_longjmp ( current - > thread . fault_catcher , 1 ) ;
else relay_signal ( sig , regs ) ;
}
void winch ( int sig , union uml_pt_regs * regs )
{
do_IRQ ( WINCH_IRQ , regs ) ;
}
void trap_init ( void )
{
}
DEFINE_SPINLOCK ( trap_lock ) ;
static int trap_index = 0 ;
int next_trap_index ( int limit )
{
int ret ;
spin_lock ( & trap_lock ) ;
ret = trap_index ;
if ( + + trap_index = = limit )
trap_index = 0 ;
spin_unlock ( & trap_lock ) ;
return ( ret ) ;
}
/*
* Overrides for Emacs so that we follow Linus ' s tabbing style .
* Emacs will notice this stuff at the end of the file and automatically
* adjust the settings for this buffer only . This must remain at the end
* of the file .
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
* Local variables :
* c - file - style : " linux "
* End :
*/