iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/iio/light/Makefile

37 lines
1.3 KiB
Makefile
Raw Normal View History

iio: add LM3533 ambient-light-sensor driver Add sub-driver for the ambient-light-sensor interface on National Semiconductor / TI LM3533 lighting power chips. The sensor interface can be used to control the LEDs and backlights of the chip through defining five light zones and three sets of corresponding output-current values. The driver provides raw and mean adc readings along with the current light zone through sysfs. A threshold event can be generated on zone changes. The ALS-control output values can be set per zone for the three current output channels. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-21 14:18:06 +02:00
#
# Makefile for IIO Light sensors
#
iio: Add a comment to about alphabetical order to Kconfigs and Makefiles Keeping Makefile and Kconfig entries in alphabetical order usually works better than just appending new entries at the end, since it reduces the amount of conflicts. This patch adds a comment to the IIO Kconfig and Makefile files to document that the entries should be kept in alphabetical order. Also reorder those entries which weren't in alphabetical order yet. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-07-15 08:45:00 +01:00
# When adding new entries keep the list in alphabetical order
iio: acpi: Add support for ACPI0008 Ambient Light Sensor This driver adds the initial support for the ACPI Ambient Light Sensor as defined in Section 9.2 of the ACPI specification (Revision 5.0) [1]. Sensors complying with the standard are exposed as ACPI devices with ACPI0008 as hardware ID and provide standard methods by which the OS can query properties of the ambient light environment the system is currently operating in. This driver currently allows only to get the current ambient light illuminance reading through the _ALI method, but is ready to be extended extended to handle _ALC, _ALT and _ALP as well. [1] http://www.acpi.info/DOWNLOADS/ACPIspec50.pdf Signed-off-by: Martin Liska <marxin.liska@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-02 14:30:57 +02:00
obj-$(CONFIG_ACPI_ALS) += acpi-als.o
iio: add adjd_s311 I2C digital color sensor driver sensor has 4 channels (10-bit each, R/G/B and clear), sensitivity and gain is controlled in the driver by ext_info integration_time and CHAN_INFO_HARDWAREGAIN driver supports triggered buffer and IIO_CHAN_INFO_RAW to get the sensor data v5: address comments by Jonathan Cameron * use macro for channel declaration * get timestamp right before measurement * cleanups v4: address comments by Lars-Peter Clausen * make sure trigger handler is exited with iio_trigger_notify_done() and IRQ_HANDLED * kfree()/kalloc() -> krealloc() v3: * fix warnings v2: address comments by Lars-Peter Clausen * buffer allocation now in update_scan_mode instead of in trigger handler * simplify trigger code (assume active_scan_mask is not empty, use for_each_set_bit, use iio_push_to_buffer) * reorder entry in Makefile and Kconfig * fix remove Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-07-10 22:32:00 +01:00
obj-$(CONFIG_ADJD_S311) += adjd_s311.o
iio: Add Dyna-Image AL3320A ambient light sensor driver Minimal implementation. This driver provides raw illuminance readings. This is based on drivers/hwmon/al3320.c (*) driver from msm tree written by Tsechih Lin <Tsechih_Lin@asus.com> * https://android.googlesource.com/kernel/msm.git Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-09 07:57:00 +01:00
obj-$(CONFIG_AL3320A) += al3320a.o
iio: add APDS9300 ambilent light sensor driver This patch adds IIO driver for APDS9300 ambient light sensor (ALS). http://www.avagotech.com/docs/AV02-1077EN The driver allows to read raw data from ADC registers or calculate lux value. It also can handle threshold interrupt. Signed-off-by: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-07-22 14:11:00 +01:00
obj-$(CONFIG_APDS9300) += apds9300.o
iio: light: add APDS9960 ALS + promixity driver APDS9960 is a combination of ALS, proximity, and gesture sensors. This patch adds support for these functions along with gain control, integration time, and event thresholds. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-17 10:30:16 -07:00
obj-$(CONFIG_APDS9960) += apds9960.o
iio: light: add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors Add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-03 20:37:21 +02:00
obj-$(CONFIG_BH1750) += bh1750.o
iio: light: new driver for the ROHM BH1780 This is a reimplementation of the old misc device driver for the ROHM BH1780 ambient light sensor (drivers/misc/bh1780gli.c). Differences from the old driver: - Uses the IIO framework - Uses runtime PM to idle the hardware after 5 seconds - No weird custom power management from userspace - No homebrewn values in sysfs This uses the same (undocumented) device tree compatible-string as the old driver ("rohm,bh1780gli"). Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Daniel Mack <daniel@caiaq.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-11 14:12:04 +02:00
obj-$(CONFIG_BH1780) += bh1780.o
iio: add Capella CM32181 ambient light sensor driver. Add Capella Microsystem CM32181 Ambient Light Sensor IIO driver. This driver will convert raw data to lux value under open-air condition. Change the calibscale based on the cover material. Signed-off-by: Kevin Tsai <ktsai@capellamicro.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-24 01:53:00 +00:00
obj-$(CONFIG_CM32181) += cm32181.o
iio: Added Capella cm3232 ambient light sensor driver. CM3232 is an advanced ambient light sensor with I2C protocol interface. The I2C slave address is internally hardwired as 0x10 (7-bit). Writing to configure register is byte mode, but reading ALS register requests to use word mode for 16-bit resolution. Signed-off-by: Kevin Tsai <ktsai@capellamicro.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-15 17:41:04 -08:00
obj-$(CONFIG_CM3232) += cm3232.o
iio: light: Add support for Capella CM3323 color sensor Minimal implementation providing raw light intensity and integration time attribute. Userspace applications can use GREEN channel for raw illuminance readings following this table: Integration Time | G Sensitivity ================================ 40 ms | 0.18 80 ms | 0.09 160 ms | 0.045 320 ms | 0.0225 640 ms | 0.01125 1280 ms | 0.005625 Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-14 21:11:41 +02:00
obj-$(CONFIG_CM3323) += cm3323.o
iio: cm36651: Add CM36651 proximity/light sensor This patch adds a new driver for Capella CM36651 proximity and RGB sensor. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-17 03:22:00 +01:00
obj-$(CONFIG_CM36651) += cm36651.o
iio: gp2ap020a00f: Add a driver for the device Add a new driver for the ambient light/proximity sensor device. The driver exposes three channels: light_clear light_ir and proximity. It also supports triggered buffer, high and low ambient light threshold event and proximity detection events. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-09 16:23:00 +01:00
obj-$(CONFIG_GP2AP020A00F) += gp2ap020a00f.o
iio: Add a comment to about alphabetical order to Kconfigs and Makefiles Keeping Makefile and Kconfig entries in alphabetical order usually works better than just appending new entries at the end, since it reduces the amount of conflicts. This patch adds a comment to the IIO Kconfig and Makefile files to document that the entries should be kept in alphabetical order. Also reorder those entries which weren't in alphabetical order yet. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-07-15 08:45:00 +01:00
obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o
iio: hid-sensors: Added Proximity Sensor Driver Added usage id processing for Proximity (Human Presence). This uses IIO interfaces for triggered buffer to present data to user mode. This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-20 06:29:00 +00:00
obj-$(CONFIG_HID_SENSOR_PROX) += hid-sensor-prox.o
iio: Add Intersil isl29125 digital color light sensor driver datasheet: http://www.intersil.com/content/dam/Intersil/documents/isl2/isl29125.pdf Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-05-07 13:38:00 +01:00
obj-$(CONFIG_ISL29125) += isl29125.o
iio: jsa1212: Add JSA1212 proximity/ALS sensor This patch adds a new driver for solteam opto JSA1212 proximity and ambient light sensor. Basic details of the chip can be found here. http://www.solteamopto.com.tw/detail.php?ms=3&po_unit=2&pt_unit=29&p_unit=120 Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-16 04:54:00 +01:00
obj-$(CONFIG_JSA1212) += jsa1212.o
iio: add LM3533 ambient-light-sensor driver Add sub-driver for the ambient-light-sensor interface on National Semiconductor / TI LM3533 lighting power chips. The sensor interface can be used to control the LEDs and backlights of the chip through defining five light zones and three sets of corresponding output-current values. The driver provides raw and mean adc readings along with the current light zone through sysfs. A threshold event can be generated on zone changes. The ALS-control output values can be set per zone for the three current output channels. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-21 14:18:06 +02:00
obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
iio: Add Lite-On ltr501 ambient light / proximity sensor driver combined ambient light (two channels) and proximity sensor with I2C interface; the ALS channels are visible+IR and IR datasheet is here http://optoelectronics.liteon.com/upload/download/DS86-2012-0006/P_100_LTR-501ALS-01_PrelimDS_ver1.1.pdf v3: * fix use of sizeof in _read_als() v2: (thanks to Lars-Peter Clausen) * cannot use devm_iio_device_register() due to cleanup order in _remove() * mutex around data wait/read * turn info message in _probe() into check for part number * change copyright year to 2014 Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-01 22:01:00 +01:00
obj-$(CONFIG_LTR501) += ltr501.o
max44000: Initial support This just adds support for reporting illuminance with default settings. Important default registers are written on probe because the device otherwise lacks a reset function. Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-18 17:31:53 +03:00
obj-$(CONFIG_MAX44000) += max44000.o
iio: light: add support for TI's opt3001 light sensor TI's opt3001 light sensor is a simple and yet powerful little device. The device provides 99% IR rejection, automatic full-scale, very low power consumption and measurements from 0.01 to 83k lux. This patch adds support for that device using the IIO framework. See http://www.ti.com/product/opt3001 for more information. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-02 17:27:58 -05:00
obj-$(CONFIG_OPT3001) += opt3001.o
iio: light: Add support for TXC PA12 als and proximity sensor Add support for TXC PA12203001 als and proximity sensor. Support for raw illuminance and proximity readings. Signed-off-by: Adriana Reus <adriana.reus@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-07 14:07:13 +03:00
obj-$(CONFIG_PA12203001) += pa12203001.o
iio: light: Add support for ROHM RPR0521 sensor This patch adds support for ROHM RPR0521 ambient light and proximity sensor. It offers raw readings for intensity and proximity. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-17 12:42:51 +03:00
obj-$(CONFIG_RPR0521) += rpr0521.o
iio:light:tsl2563 move out of staging This driver is simple, uses the latest interfaces and contains few if any controversial elements. All of its interfaces have been in place for a long time now. Hence let's move it out of staging. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Peter Meerwald <pmeerw@pmeerw.net>
2013-01-12 10:35:00 +00:00
obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
iio: light: Add driver for Silabs si1132, si1141/2/3 and si1145/6/7 ambient light, uv index and proximity sensors The si114x supports x=1,2,3 IR LEDs for proximity sensing together with visible and IR ambient light sensing (ALS). Newer parts (si1132, si1145/6/7) can measure UV light and compute an UV index This was tested on si1143 and si1145 Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 16:41:30 +02:00
obj-$(CONFIG_SI1145) += si1145.o
iio: light: Add support for Sensortek STK3310 Minimal implementation of an IIO driver for the Sensortek STK3310 ambient light and proximity sensor. The STK3311 model is also supported. Includes: - ACPI support; - read_raw and write_raw; - reading and setting configuration parameters for gain/scale and integration time for both ALS and PS. - power management Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-27 18:34:00 +03:00
obj-$(CONFIG_STK3310) += stk3310.o
iio: Add driver for AMS/TAOS tcs3414 digital color sensor 16-bit digital color sensor with red, green, blue and clear channel datasheet: http://ams.com/eng/content/download/250258/975997/TCS3414_Datasheet_EN_v1.pdf Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-05-07 13:38:00 +01:00
obj-$(CONFIG_TCS3414) += tcs3414.o
iio: Add tcs3472 color light sensor driver chip has four 16-bit channels for red, green, blue, clear color intensity; driver supports the TCS3x7x family of devices and was tested with a TCS34725 chip; further information here: http://www.ams.com/eng/Products/Light-Sensors/Color-Sensor/TCS34725 v2 (thanks to Jonathan Cameron): * drop dynamic buffer allocation, buffer is in tcs3472_data * limit sysfs output to PAGE_SIZE * check val2 == 0 when writing CALIBSCALE Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Jon Brenner <jon.brenner@ams.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-14 20:38:00 +01:00
obj-$(CONFIG_TCS3472) += tcs3472.o
iio: Add tsl4531 ambient light sensor driver driver for the TSL4531 family of 16-bit I2C ambient light sensors; information is here: http://www.ams.com/eng/Products/Light-Sensors/Ambient-Light-Sensor-ALS/TSL45315 the chip offers simple lux output v3 (thanks Lars-Peter Clausen): * add mutex to when updating integration time * fix chip ID checking * code cleanups v2: * rename to tsl4351 * use INT_TIME Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-08 16:20:00 +01:00
obj-$(CONFIG_TSL4531) += tsl4531.o
iio: light: Add support for UPISEMI uS5182d als and proximity sensor Add support for UPISEMI us5182d als and proximity sensor. Supports raw readings. Data sheet for this device can be found here: http://www.upi-semi.com/temp/uS5182D-DS-P0103-temp.pdf Signed-off-by: Adriana Reus <adriana.reus@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-16 11:14:11 +03:00
obj-$(CONFIG_US5182D) += us5182d.o
iio: add vcnl4000 combined ALS and proximity sensor minimal driver, no IR current control and proximity/event handling yet v5: * checkpatch warnings * increase msleep() to 20 ms when waiting for data ready as measurement/conversion can take up to 100 ms, 1 ms is too short v4 (address comments by Jonathan Cameron) * remove SENSORS_ prefix in Kconfig * change from IIO_INTENSITY to IIO_LIGHT * move from staging v3 (address comments by Shubhrajyoti Datta) * cleanup Kconfig entry * call I2C read/write functions directly v2 (address comments by Lars-Peter Clausen and Jonathan Cameron) * unify code for reading PS and AL data into parameterized _measure() function * limit wait for data to become ready within 20 tries * drop IIO_LIGHT channel, add SCALE to IIO_INTENSITY * drop extra string arguments used for logging purpose only Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-19 09:58:54 +02:00
obj-$(CONFIG_VCNL4000) += vcnl4000.o
iio: Add Vishay VEML6070 UV A light sensor driver ultraviolet (UV) light sensor with I2C interface with a peak sensitivity at 355 nm strangely, chip uses two addresses 0x38 and 0x39 for LSB and MSB data, resp. datasheet: http://www.vishay.com/docs/84277/veml6070.pdf Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-20 16:20:24 +01:00
obj-$(CONFIG_VEML6070) += veml6070.o
Reference in New Issue Copy Permalink