iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/pinctrl/aspeed/pinctrl-aspeed.h

86 lines
2.6 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 08:55:01 +02:00
/* SPDX-License-Identifier: GPL-2.0-or-later */
pinctrl: Add core support for Aspeed SoCs The Aspeed SoCs typically provide more than 200 pins for GPIO and other functions. The signal enabled on a pin is determined on a priority basis, where a given pin can provide a number of different signal types. In addition to the priority levels, the Aspeed pin controllers describe the signal active on a pin by compound logical expressions involving multiple operators, registers and bits. Some difficulty arises as a pin's function bit masks for each priority level are frequently not the same (i.e. we cannot just flip a bit to change from a high to low priority signal), or even in the same register(s). Some configuration bits affect multiple pins, while in other cases the signals for a bus must each be enabled individually. Together, these features give rise to some complexity in the implementation. A more complete description of the complexities is provided in the associated header file. The patch doesn't implement pinctrl/pinmux/pinconf for any particular Aspeed SoC, rather it adds the framework for defining pinmux configurations. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-30 17:24:24 +09:30
/*
* Copyright (C) 2016 IBM Corp.
*/
#ifndef PINCTRL_ASPEED
#define PINCTRL_ASPEED
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/regmap.h>
pinctrl: aspeed: Fix missed include Some SPDX churn made my fixes drop an important include from the Aspeed pinctrl header. Fix it up. Cc: Andrew Jeffery <andrew@aj.id.au> Reported-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-09 13:41:53 +02:00
#include "pinmux-aspeed.h"
pinctrl: Add core support for Aspeed SoCs The Aspeed SoCs typically provide more than 200 pins for GPIO and other functions. The signal enabled on a pin is determined on a priority basis, where a given pin can provide a number of different signal types. In addition to the priority levels, the Aspeed pin controllers describe the signal active on a pin by compound logical expressions involving multiple operators, registers and bits. Some difficulty arises as a pin's function bit masks for each priority level are frequently not the same (i.e. we cannot just flip a bit to change from a high to low priority signal), or even in the same register(s). Some configuration bits affect multiple pins, while in other cases the signals for a bus must each be enabled individually. Together, these features give rise to some complexity in the implementation. A more complete description of the complexities is provided in the associated header file. The patch doesn't implement pinctrl/pinmux/pinconf for any particular Aspeed SoC, rather it adds the framework for defining pinmux configurations. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-30 17:24:24 +09:30
pinctrl: aspeed: Add core pinconf support Several pinconf parameters have a fairly straight-forward mapping onto the Aspeed pin controller. These include management of pull-down bias, drive-strength, and some debounce configuration. Pin biasing largely is managed on a per-GPIO-bank basis, aside from the ADC and RMII/RGMII pins. As the bias configuration for each pin in a bank maps onto a single per-bank bit, configuration tables will be introduced to describe the ranges of pins and the supported pinconf parameter. The use of tables also helps with the sparse support of pinconf properties, and the fact that not all GPIO banks support biasing or drive-strength configuration. Further, as the pin controller uses a consistent approach for bias and drive strength configuration at the register level, a second table is defined for looking up the the bit-state required to enable or query the provided configuration. Testing for pinctrl-aspeed-g4 was performed on an OpenPOWER Palmetto system, and pinctrl-aspeed-g5 on an AST2500EVB as well as under QEMU. The test method was to set the appropriate bits via devmem and verify the result through the controller's pinconf-pins debugfs file. This simultaneously validates the get() path and half of the set() path. The remainder of the set() path was validated by configuring a handful of pins via the devicetree with the supported pinconf properties and verifying the appropriate registers were touched. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-07 22:27:11 +09:30
/**
* @param The pinconf parameter type
* @pins The pin range this config struct covers, [low, high]
* @reg The register housing the configuration bits
* @mask The mask to select the bits of interest in @reg
*/
struct aspeed_pin_config {
enum pin_config_param param;
unsigned int pins[2];
unsigned int reg;
u8 bit;
u8 value;
};
pinctrl: Add core support for Aspeed SoCs The Aspeed SoCs typically provide more than 200 pins for GPIO and other functions. The signal enabled on a pin is determined on a priority basis, where a given pin can provide a number of different signal types. In addition to the priority levels, the Aspeed pin controllers describe the signal active on a pin by compound logical expressions involving multiple operators, registers and bits. Some difficulty arises as a pin's function bit masks for each priority level are frequently not the same (i.e. we cannot just flip a bit to change from a high to low priority signal), or even in the same register(s). Some configuration bits affect multiple pins, while in other cases the signals for a bus must each be enabled individually. Together, these features give rise to some complexity in the implementation. A more complete description of the complexities is provided in the associated header file. The patch doesn't implement pinctrl/pinmux/pinconf for any particular Aspeed SoC, rather it adds the framework for defining pinmux configurations. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-30 17:24:24 +09:30
#define ASPEED_PINCTRL_PIN(name_) \
[name_] = { \
.number = name_, \
.name = #name_, \
.drv_data = (void *) &(PIN_SYM(name_)) \
}
pinctrl: aspeed: Split out pinmux from general pinctrl ASPEED have completely rearranged the System Control Unit register layout with the AST2600. The existing code took advantage of the fact that the AST2400 and AST2500 had layouts that were similar enough to have little impact on the pinmux infrastructure (though there is a wart with read-modify-write vs write-1-clear semantics of the hardware strapping registers between the two). Given that any similarity has been thrown out with the AST2600, separate out the function applying an expression state to be driver-specific. With it, extract out the pinmux macro jungle to its own header and implementation so the pieces can be composed without dependency cycles. Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190628023838.15426-8-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-28 12:08:37 +09:30
struct aspeed_pinctrl_data {
struct regmap *scu;
const struct pinctrl_pin_desc *pins;
pinctrl: Add core support for Aspeed SoCs The Aspeed SoCs typically provide more than 200 pins for GPIO and other functions. The signal enabled on a pin is determined on a priority basis, where a given pin can provide a number of different signal types. In addition to the priority levels, the Aspeed pin controllers describe the signal active on a pin by compound logical expressions involving multiple operators, registers and bits. Some difficulty arises as a pin's function bit masks for each priority level are frequently not the same (i.e. we cannot just flip a bit to change from a high to low priority signal), or even in the same register(s). Some configuration bits affect multiple pins, while in other cases the signals for a bus must each be enabled individually. Together, these features give rise to some complexity in the implementation. A more complete description of the complexities is provided in the associated header file. The patch doesn't implement pinctrl/pinmux/pinconf for any particular Aspeed SoC, rather it adds the framework for defining pinmux configurations. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-30 17:24:24 +09:30
const unsigned int npins;
pinctrl: aspeed: Split out pinmux from general pinctrl ASPEED have completely rearranged the System Control Unit register layout with the AST2600. The existing code took advantage of the fact that the AST2400 and AST2500 had layouts that were similar enough to have little impact on the pinmux infrastructure (though there is a wart with read-modify-write vs write-1-clear semantics of the hardware strapping registers between the two). Given that any similarity has been thrown out with the AST2600, separate out the function applying an expression state to be driver-specific. With it, extract out the pinmux macro jungle to its own header and implementation so the pieces can be composed without dependency cycles. Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190628023838.15426-8-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-28 12:08:37 +09:30
const struct aspeed_pin_config *configs;
const unsigned int nconfigs;
pinctrl: Add core support for Aspeed SoCs The Aspeed SoCs typically provide more than 200 pins for GPIO and other functions. The signal enabled on a pin is determined on a priority basis, where a given pin can provide a number of different signal types. In addition to the priority levels, the Aspeed pin controllers describe the signal active on a pin by compound logical expressions involving multiple operators, registers and bits. Some difficulty arises as a pin's function bit masks for each priority level are frequently not the same (i.e. we cannot just flip a bit to change from a high to low priority signal), or even in the same register(s). Some configuration bits affect multiple pins, while in other cases the signals for a bus must each be enabled individually. Together, these features give rise to some complexity in the implementation. A more complete description of the complexities is provided in the associated header file. The patch doesn't implement pinctrl/pinmux/pinconf for any particular Aspeed SoC, rather it adds the framework for defining pinmux configurations. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-30 17:24:24 +09:30
pinctrl: aspeed: Split out pinmux from general pinctrl ASPEED have completely rearranged the System Control Unit register layout with the AST2600. The existing code took advantage of the fact that the AST2400 and AST2500 had layouts that were similar enough to have little impact on the pinmux infrastructure (though there is a wart with read-modify-write vs write-1-clear semantics of the hardware strapping registers between the two). Given that any similarity has been thrown out with the AST2600, separate out the function applying an expression state to be driver-specific. With it, extract out the pinmux macro jungle to its own header and implementation so the pieces can be composed without dependency cycles. Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190628023838.15426-8-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-28 12:08:37 +09:30
struct aspeed_pinmux_data pinmux;
pinctrl: Add core support for Aspeed SoCs The Aspeed SoCs typically provide more than 200 pins for GPIO and other functions. The signal enabled on a pin is determined on a priority basis, where a given pin can provide a number of different signal types. In addition to the priority levels, the Aspeed pin controllers describe the signal active on a pin by compound logical expressions involving multiple operators, registers and bits. Some difficulty arises as a pin's function bit masks for each priority level are frequently not the same (i.e. we cannot just flip a bit to change from a high to low priority signal), or even in the same register(s). Some configuration bits affect multiple pins, while in other cases the signals for a bus must each be enabled individually. Together, these features give rise to some complexity in the implementation. A more complete description of the complexities is provided in the associated header file. The patch doesn't implement pinctrl/pinmux/pinconf for any particular Aspeed SoC, rather it adds the framework for defining pinmux configurations. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-30 17:24:24 +09:30
};
pinctrl: aspeed: Split out pinmux from general pinctrl ASPEED have completely rearranged the System Control Unit register layout with the AST2600. The existing code took advantage of the fact that the AST2400 and AST2500 had layouts that were similar enough to have little impact on the pinmux infrastructure (though there is a wart with read-modify-write vs write-1-clear semantics of the hardware strapping registers between the two). Given that any similarity has been thrown out with the AST2600, separate out the function applying an expression state to be driver-specific. With it, extract out the pinmux macro jungle to its own header and implementation so the pieces can be composed without dependency cycles. Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190628023838.15426-8-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-28 12:08:37 +09:30
/* Aspeed pinctrl helpers */
pinctrl: Add core support for Aspeed SoCs The Aspeed SoCs typically provide more than 200 pins for GPIO and other functions. The signal enabled on a pin is determined on a priority basis, where a given pin can provide a number of different signal types. In addition to the priority levels, the Aspeed pin controllers describe the signal active on a pin by compound logical expressions involving multiple operators, registers and bits. Some difficulty arises as a pin's function bit masks for each priority level are frequently not the same (i.e. we cannot just flip a bit to change from a high to low priority signal), or even in the same register(s). Some configuration bits affect multiple pins, while in other cases the signals for a bus must each be enabled individually. Together, these features give rise to some complexity in the implementation. A more complete description of the complexities is provided in the associated header file. The patch doesn't implement pinctrl/pinmux/pinconf for any particular Aspeed SoC, rather it adds the framework for defining pinmux configurations. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-30 17:24:24 +09:30
int aspeed_pinctrl_get_groups_count(struct pinctrl_dev *pctldev);
const char *aspeed_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
unsigned int group);
int aspeed_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
unsigned int group, const unsigned int **pins,
unsigned int *npins);
void aspeed_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned int offset);
int aspeed_pinmux_get_fn_count(struct pinctrl_dev *pctldev);
const char *aspeed_pinmux_get_fn_name(struct pinctrl_dev *pctldev,
unsigned int function);
int aspeed_pinmux_get_fn_groups(struct pinctrl_dev *pctldev,
unsigned int function, const char * const **groups,
unsigned int * const num_groups);
int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
unsigned int group);
int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset);
int aspeed_pinctrl_probe(struct platform_device *pdev,
struct pinctrl_desc *pdesc,
struct aspeed_pinctrl_data *pdata);
pinctrl: aspeed: Add core pinconf support Several pinconf parameters have a fairly straight-forward mapping onto the Aspeed pin controller. These include management of pull-down bias, drive-strength, and some debounce configuration. Pin biasing largely is managed on a per-GPIO-bank basis, aside from the ADC and RMII/RGMII pins. As the bias configuration for each pin in a bank maps onto a single per-bank bit, configuration tables will be introduced to describe the ranges of pins and the supported pinconf parameter. The use of tables also helps with the sparse support of pinconf properties, and the fact that not all GPIO banks support biasing or drive-strength configuration. Further, as the pin controller uses a consistent approach for bias and drive strength configuration at the register level, a second table is defined for looking up the the bit-state required to enable or query the provided configuration. Testing for pinctrl-aspeed-g4 was performed on an OpenPOWER Palmetto system, and pinctrl-aspeed-g5 on an AST2500EVB as well as under QEMU. The test method was to set the appropriate bits via devmem and verify the result through the controller's pinconf-pins debugfs file. This simultaneously validates the get() path and half of the set() path. The remainder of the set() path was validated by configuring a handful of pins via the devicetree with the supported pinconf properties and verifying the appropriate registers were touched. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-07 22:27:11 +09:30
int aspeed_pin_config_get(struct pinctrl_dev *pctldev, unsigned int offset,
unsigned long *config);
int aspeed_pin_config_set(struct pinctrl_dev *pctldev, unsigned int offset,
unsigned long *configs, unsigned int num_configs);
int aspeed_pin_config_group_get(struct pinctrl_dev *pctldev,
unsigned int selector,
unsigned long *config);
int aspeed_pin_config_group_set(struct pinctrl_dev *pctldev,
unsigned int selector,
unsigned long *configs,
unsigned int num_configs);
pinctrl: Add core support for Aspeed SoCs The Aspeed SoCs typically provide more than 200 pins for GPIO and other functions. The signal enabled on a pin is determined on a priority basis, where a given pin can provide a number of different signal types. In addition to the priority levels, the Aspeed pin controllers describe the signal active on a pin by compound logical expressions involving multiple operators, registers and bits. Some difficulty arises as a pin's function bit masks for each priority level are frequently not the same (i.e. we cannot just flip a bit to change from a high to low priority signal), or even in the same register(s). Some configuration bits affect multiple pins, while in other cases the signals for a bus must each be enabled individually. Together, these features give rise to some complexity in the implementation. A more complete description of the complexities is provided in the associated header file. The patch doesn't implement pinctrl/pinmux/pinconf for any particular Aspeed SoC, rather it adds the framework for defining pinmux configurations. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-30 17:24:24 +09:30
#endif /* PINCTRL_ASPEED */
Reference in New Issue Copy Permalink