linux/kernel/irq/handle.c

208 lines
5.3 KiB
C
Raw Normal View History

/*
* linux/kernel/irq/handle.c
*
* Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
* Copyright (C) 2005-2006, Thomas Gleixner, Russell King
*
* This file contains the core interrupt handling code.
*
* Detailed information is available in Documentation/DocBook/genericirq
*
*/
#include <linux/irq.h>
#include <linux/random.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <trace/events/irq.h>
#include "internals.h"
/**
* handle_bad_irq - handle spurious and unhandled irqs
* @desc: description of the interrupt
*
* Handles spurious and unhandled IRQ's. It also prints a debugmessage.
*/
void handle_bad_irq(struct irq_desc *desc)
{
unsigned int irq = irq_desc_get_irq(desc);
print_irq_desc(irq, desc);
kstat_incr_irqs_this_cpu(desc);
ack_bad_irq(irq);
}
EXPORT_SYMBOL_GPL(handle_bad_irq);
/*
* Special, empty irq handler:
*/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
irqreturn_t no_action(int cpl, void *dev_id)
{
return IRQ_NONE;
}
EXPORT_SYMBOL_GPL(no_action);
static void warn_no_thread(unsigned int irq, struct irqaction *action)
{
if (test_and_set_bit(IRQTF_WARNED, &action->thread_flags))
return;
printk(KERN_WARNING "IRQ %d device %s returned IRQ_WAKE_THREAD "
"but no thread function available.", irq, action->name);
}
void __irq_wake_thread(struct irq_desc *desc, struct irqaction *action)
{
/*
* In case the thread crashed and was killed we just pretend that
* we handled the interrupt. The hardirq handler has disabled the
* device interrupt, so no irq storm is lurking.
*/
if (action->thread->flags & PF_EXITING)
return;
/*
* Wake up the handler thread for this action. If the
* RUNTHREAD bit is already set, nothing to do.
*/
if (test_and_set_bit(IRQTF_RUNTHREAD, &action->thread_flags))
return;
/*
* It's safe to OR the mask lockless here. We have only two
* places which write to threads_oneshot: This code and the
* irq thread.
*
* This code is the hard irq context and can never run on two
* cpus in parallel. If it ever does we have more serious
* problems than this bitmask.
*
* The irq threads of this irq which clear their "running" bit
* in threads_oneshot are serialized via desc->lock against
* each other and they are serialized against this code by
* IRQS_INPROGRESS.
*
* Hard irq handler:
*
* spin_lock(desc->lock);
* desc->state |= IRQS_INPROGRESS;
* spin_unlock(desc->lock);
* set_bit(IRQTF_RUNTHREAD, &action->thread_flags);
* desc->threads_oneshot |= mask;
* spin_lock(desc->lock);
* desc->state &= ~IRQS_INPROGRESS;
* spin_unlock(desc->lock);
*
* irq thread:
*
* again:
* spin_lock(desc->lock);
* if (desc->state & IRQS_INPROGRESS) {
* spin_unlock(desc->lock);
* while(desc->state & IRQS_INPROGRESS)
* cpu_relax();
* goto again;
* }
* if (!test_bit(IRQTF_RUNTHREAD, &action->thread_flags))
* desc->threads_oneshot &= ~mask;
* spin_unlock(desc->lock);
*
* So either the thread waits for us to clear IRQS_INPROGRESS
* or we are waiting in the flow handler for desc->lock to be
* released before we reach this point. The thread also checks
* IRQTF_RUNTHREAD under desc->lock. If set it leaves
* threads_oneshot untouched and runs the thread another time.
*/
desc->threads_oneshot |= action->thread_mask;
/*
* We increment the threads_active counter in case we wake up
* the irq thread. The irq thread decrements the counter when
* it returns from the handler or in the exit path and wakes
* up waiters which are stuck in synchronize_irq() when the
* active count becomes zero. synchronize_irq() is serialized
* against this code (hard irq handler) via IRQS_INPROGRESS
* like the finalize_oneshot() code. See comment above.
*/
atomic_inc(&desc->threads_active);
wake_up_process(action->thread);
}
irqreturn_t __handle_irq_event_percpu(struct irq_desc *desc, unsigned int *flags)
{
irqreturn_t retval = IRQ_NONE;
unsigned int irq = desc->irq_data.irq;
struct irqaction *action;
for_each_action_of_desc(desc, action) {
irqreturn_t res;
trace_irq_handler_entry(irq, action);
res = action->handler(irq, action->dev_id);
trace_irq_handler_exit(irq, action, res);
if (WARN_ONCE(!irqs_disabled(),"irq %u handler %pF enabled interrupts\n",
irq, action->handler))
local_irq_disable();
switch (res) {
case IRQ_WAKE_THREAD:
/*
* Catch drivers which return WAKE_THREAD but
* did not set up a thread function
*/
if (unlikely(!action->thread_fn)) {
warn_no_thread(irq, action);
break;
}
__irq_wake_thread(desc, action);
/* Fall through to add to randomness */
case IRQ_HANDLED:
*flags |= action->flags;
break;
default:
break;
}
retval |= res;
genirq: Validate action before dereferencing it in handle_irq_event_percpu() commit 71f64340fc0e changed the handling of irq_desc->action from CPU 0 CPU 1 free_irq() lock(desc) lock(desc) handle_edge_irq() if (desc->action) { handle_irq_event() action = desc->action unlock(desc) desc->action = NULL handle_irq_event_percpu(desc, action) action->xxx to CPU 0 CPU 1 free_irq() lock(desc) lock(desc) handle_edge_irq() if (desc->action) { handle_irq_event() unlock(desc) desc->action = NULL handle_irq_event_percpu(desc, action) action = desc->action action->xxx So if free_irq manages to set the action to NULL between the unlock and before the readout, we happily dereference a null pointer. We could simply revert 71f64340fc0e, but we want to preserve the better code generation. A simple solution is to change the action loop from a do {} while to a while {} loop. This is safe because we either see a valid desc->action or NULL. If the action is about to be removed it is still valid as free_irq() is blocked on synchronize_irq(). CPU 0 CPU 1 free_irq() lock(desc) lock(desc) handle_edge_irq() handle_irq_event(desc) set(INPROGRESS) unlock(desc) handle_irq_event_percpu(desc) action = desc->action desc->action = NULL while (action) { action->xxx ... action = action->next; sychronize_irq() while(INPROGRESS); lock(desc) clr(INPROGRESS) free(action) That's basically the same mechanism as we have for shared interrupts. action->next can become NULL while handle_irq_event_percpu() runs. Either it sees the action or NULL. It does not matter, because action itself cannot go away before the interrupt in progress flag has been cleared. Fixes: commit 71f64340fc0e "genirq: Remove the second parameter from handle_irq_event_percpu()" Reported-by: zyjzyj2000@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Huang Shijie <shijie.huang@arm.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1601131224190.3575@nanos
2016-01-13 16:07:25 +03:00
}
return retval;
}
irqreturn_t handle_irq_event_percpu(struct irq_desc *desc)
{
irqreturn_t retval;
unsigned int flags = 0;
retval = __handle_irq_event_percpu(desc, &flags);
add_interrupt_randomness(desc->irq_data.irq, flags);
if (!noirqdebug)
note_interrupt(desc, retval);
return retval;
}
irqreturn_t handle_irq_event(struct irq_desc *desc)
{
irqreturn_t ret;
desc->istate &= ~IRQS_PENDING;
irqd_set(&desc->irq_data, IRQD_IRQ_INPROGRESS);
raw_spin_unlock(&desc->lock);
ret = handle_irq_event_percpu(desc);
raw_spin_lock(&desc->lock);
irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
return ret;
}