linux/drivers/gpu/drm/drm_atomic_uapi.c

1438 lines
42 KiB
C
Raw Normal View History

/*
* Copyright (C) 2014 Red Hat
* Copyright (C) 2014 Intel Corp.
* Copyright (C) 2018 Intel Corp.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors:
* Rob Clark <robdclark@gmail.com>
* Daniel Vetter <daniel.vetter@ffwll.ch>
*/
#include <drm/drm_atomic_uapi.h>
#include <drm/drm_atomic.h>
#include <drm/drm_print.h>
#include <drm/drm_drv.h>
#include <drm/drm_writeback.h>
#include <drm/drm_vblank.h>
#include <linux/dma-fence.h>
#include <linux/uaccess.h>
#include <linux/sync_file.h>
#include <linux/file.h>
#include "drm_crtc_internal.h"
/**
* DOC: overview
*
* This file contains the marshalling and demarshalling glue for the atomic UAPI
* in all its forms: The monster ATOMIC IOCTL itself, code for GET_PROPERTY and
* SET_PROPERTY IOCTLs. Plus interface functions for compatibility helpers and
* drivers which have special needs to construct their own atomic updates, e.g.
* for load detect or similiar.
*/
/**
* drm_atomic_set_mode_for_crtc - set mode for CRTC
* @state: the CRTC whose incoming state to update
* @mode: kernel-internal mode to use for the CRTC, or NULL to disable
*
* Set a mode (originating from the kernel) on the desired CRTC state and update
* the enable property.
*
* RETURNS:
* Zero on success, error code on failure. Cannot return -EDEADLK.
*/
int drm_atomic_set_mode_for_crtc(struct drm_crtc_state *state,
const struct drm_display_mode *mode)
{
struct drm_crtc *crtc = state->crtc;
struct drm_mode_modeinfo umode;
/* Early return for no change. */
if (mode && memcmp(&state->mode, mode, sizeof(*mode)) == 0)
return 0;
drm_property_blob_put(state->mode_blob);
state->mode_blob = NULL;
if (mode) {
drm_mode_convert_to_umode(&umode, mode);
state->mode_blob =
drm_property_create_blob(state->crtc->dev,
sizeof(umode),
&umode);
if (IS_ERR(state->mode_blob))
return PTR_ERR(state->mode_blob);
drm_mode_copy(&state->mode, mode);
state->enable = true;
DRM_DEBUG_ATOMIC("Set [MODE:%s] for [CRTC:%d:%s] state %p\n",
mode->name, crtc->base.id, crtc->name, state);
} else {
memset(&state->mode, 0, sizeof(state->mode));
state->enable = false;
DRM_DEBUG_ATOMIC("Set [NOMODE] for [CRTC:%d:%s] state %p\n",
crtc->base.id, crtc->name, state);
}
return 0;
}
EXPORT_SYMBOL(drm_atomic_set_mode_for_crtc);
/**
* drm_atomic_set_mode_prop_for_crtc - set mode for CRTC
* @state: the CRTC whose incoming state to update
* @blob: pointer to blob property to use for mode
*
* Set a mode (originating from a blob property) on the desired CRTC state.
* This function will take a reference on the blob property for the CRTC state,
* and release the reference held on the state's existing mode property, if any
* was set.
*
* RETURNS:
* Zero on success, error code on failure. Cannot return -EDEADLK.
*/
int drm_atomic_set_mode_prop_for_crtc(struct drm_crtc_state *state,
struct drm_property_blob *blob)
{
struct drm_crtc *crtc = state->crtc;
if (blob == state->mode_blob)
return 0;
drm_property_blob_put(state->mode_blob);
state->mode_blob = NULL;
memset(&state->mode, 0, sizeof(state->mode));
if (blob) {
int ret;
if (blob->length != sizeof(struct drm_mode_modeinfo)) {
DRM_DEBUG_ATOMIC("[CRTC:%d:%s] bad mode blob length: %zu\n",
crtc->base.id, crtc->name,
blob->length);
return -EINVAL;
}
ret = drm_mode_convert_umode(crtc->dev,
&state->mode, blob->data);
if (ret) {
DRM_DEBUG_ATOMIC("[CRTC:%d:%s] invalid mode (ret=%d, status=%s):\n",
crtc->base.id, crtc->name,
ret, drm_get_mode_status_name(state->mode.status));
drm_mode_debug_printmodeline(&state->mode);
return -EINVAL;
}
state->mode_blob = drm_property_blob_get(blob);
state->enable = true;
DRM_DEBUG_ATOMIC("Set [MODE:%s] for [CRTC:%d:%s] state %p\n",
state->mode.name, crtc->base.id, crtc->name,
state);
} else {
state->enable = false;
DRM_DEBUG_ATOMIC("Set [NOMODE] for [CRTC:%d:%s] state %p\n",
crtc->base.id, crtc->name, state);
}
return 0;
}
EXPORT_SYMBOL(drm_atomic_set_mode_prop_for_crtc);
/**
* drm_atomic_set_crtc_for_plane - set CRTC for plane
* @plane_state: the plane whose incoming state to update
* @crtc: CRTC to use for the plane
*
* Changing the assigned CRTC for a plane requires us to grab the lock and state
* for the new CRTC, as needed. This function takes care of all these details
* besides updating the pointer in the state object itself.
*
* Returns:
* 0 on success or can fail with -EDEADLK or -ENOMEM. When the error is EDEADLK
* then the w/w mutex code has detected a deadlock and the entire atomic
* sequence must be restarted. All other errors are fatal.
*/
int
drm_atomic_set_crtc_for_plane(struct drm_plane_state *plane_state,
struct drm_crtc *crtc)
{
struct drm_plane *plane = plane_state->plane;
struct drm_crtc_state *crtc_state;
/* Nothing to do for same crtc*/
if (plane_state->crtc == crtc)
return 0;
if (plane_state->crtc) {
crtc_state = drm_atomic_get_crtc_state(plane_state->state,
plane_state->crtc);
if (WARN_ON(IS_ERR(crtc_state)))
return PTR_ERR(crtc_state);
crtc_state->plane_mask &= ~drm_plane_mask(plane);
}
plane_state->crtc = crtc;
if (crtc) {
crtc_state = drm_atomic_get_crtc_state(plane_state->state,
crtc);
if (IS_ERR(crtc_state))
return PTR_ERR(crtc_state);
crtc_state->plane_mask |= drm_plane_mask(plane);
}
if (crtc)
DRM_DEBUG_ATOMIC("Link [PLANE:%d:%s] state %p to [CRTC:%d:%s]\n",
plane->base.id, plane->name, plane_state,
crtc->base.id, crtc->name);
else
DRM_DEBUG_ATOMIC("Link [PLANE:%d:%s] state %p to [NOCRTC]\n",
plane->base.id, plane->name, plane_state);
return 0;
}
EXPORT_SYMBOL(drm_atomic_set_crtc_for_plane);
/**
* drm_atomic_set_fb_for_plane - set framebuffer for plane
* @plane_state: atomic state object for the plane
* @fb: fb to use for the plane
*
* Changing the assigned framebuffer for a plane requires us to grab a reference
* to the new fb and drop the reference to the old fb, if there is one. This
* function takes care of all these details besides updating the pointer in the
* state object itself.
*/
void
drm_atomic_set_fb_for_plane(struct drm_plane_state *plane_state,
struct drm_framebuffer *fb)
{
struct drm_plane *plane = plane_state->plane;
if (fb)
DRM_DEBUG_ATOMIC("Set [FB:%d] for [PLANE:%d:%s] state %p\n",
fb->base.id, plane->base.id, plane->name,
plane_state);
else
DRM_DEBUG_ATOMIC("Set [NOFB] for [PLANE:%d:%s] state %p\n",
plane->base.id, plane->name, plane_state);
drm_framebuffer_assign(&plane_state->fb, fb);
}
EXPORT_SYMBOL(drm_atomic_set_fb_for_plane);
/**
* drm_atomic_set_fence_for_plane - set fence for plane
* @plane_state: atomic state object for the plane
* @fence: dma_fence to use for the plane
*
* Helper to setup the plane_state fence in case it is not set yet.
* By using this drivers doesn't need to worry if the user choose
* implicit or explicit fencing.
*
* This function will not set the fence to the state if it was set
* via explicit fencing interfaces on the atomic ioctl. In that case it will
* drop the reference to the fence as we are not storing it anywhere.
* Otherwise, if &drm_plane_state.fence is not set this function we just set it
* with the received implicit fence. In both cases this function consumes a
* reference for @fence.
*
* This way explicit fencing can be used to overrule implicit fencing, which is
* important to make explicit fencing use-cases work: One example is using one
* buffer for 2 screens with different refresh rates. Implicit fencing will
* clamp rendering to the refresh rate of the slower screen, whereas explicit
* fence allows 2 independent render and display loops on a single buffer. If a
* driver allows obeys both implicit and explicit fences for plane updates, then
* it will break all the benefits of explicit fencing.
*/
void
drm_atomic_set_fence_for_plane(struct drm_plane_state *plane_state,
struct dma_fence *fence)
{
if (plane_state->fence) {
dma_fence_put(fence);
return;
}
plane_state->fence = fence;
}
EXPORT_SYMBOL(drm_atomic_set_fence_for_plane);
/**
* drm_atomic_set_crtc_for_connector - set CRTC for connector
* @conn_state: atomic state object for the connector
* @crtc: CRTC to use for the connector
*
* Changing the assigned CRTC for a connector requires us to grab the lock and
* state for the new CRTC, as needed. This function takes care of all these
* details besides updating the pointer in the state object itself.
*
* Returns:
* 0 on success or can fail with -EDEADLK or -ENOMEM. When the error is EDEADLK
* then the w/w mutex code has detected a deadlock and the entire atomic
* sequence must be restarted. All other errors are fatal.
*/
int
drm_atomic_set_crtc_for_connector(struct drm_connector_state *conn_state,
struct drm_crtc *crtc)
{
struct drm_connector *connector = conn_state->connector;
struct drm_crtc_state *crtc_state;
if (conn_state->crtc == crtc)
return 0;
if (conn_state->crtc) {
crtc_state = drm_atomic_get_new_crtc_state(conn_state->state,
conn_state->crtc);
crtc_state->connector_mask &=
~drm_connector_mask(conn_state->connector);
drm_connector_put(conn_state->connector);
conn_state->crtc = NULL;
}
if (crtc) {
crtc_state = drm_atomic_get_crtc_state(conn_state->state, crtc);
if (IS_ERR(crtc_state))
return PTR_ERR(crtc_state);
crtc_state->connector_mask |=
drm_connector_mask(conn_state->connector);
drm_connector_get(conn_state->connector);
conn_state->crtc = crtc;
DRM_DEBUG_ATOMIC("Link [CONNECTOR:%d:%s] state %p to [CRTC:%d:%s]\n",
connector->base.id, connector->name,
conn_state, crtc->base.id, crtc->name);
} else {
DRM_DEBUG_ATOMIC("Link [CONNECTOR:%d:%s] state %p to [NOCRTC]\n",
connector->base.id, connector->name,
conn_state);
}
return 0;
}
EXPORT_SYMBOL(drm_atomic_set_crtc_for_connector);
static void set_out_fence_for_crtc(struct drm_atomic_state *state,
struct drm_crtc *crtc, s32 __user *fence_ptr)
{
state->crtcs[drm_crtc_index(crtc)].out_fence_ptr = fence_ptr;
}
static s32 __user *get_out_fence_for_crtc(struct drm_atomic_state *state,
struct drm_crtc *crtc)
{
s32 __user *fence_ptr;
fence_ptr = state->crtcs[drm_crtc_index(crtc)].out_fence_ptr;
state->crtcs[drm_crtc_index(crtc)].out_fence_ptr = NULL;
return fence_ptr;
}
static int set_out_fence_for_connector(struct drm_atomic_state *state,
struct drm_connector *connector,
s32 __user *fence_ptr)
{
unsigned int index = drm_connector_index(connector);
if (!fence_ptr)
return 0;
if (put_user(-1, fence_ptr))
return -EFAULT;
state->connectors[index].out_fence_ptr = fence_ptr;
return 0;
}
static s32 __user *get_out_fence_for_connector(struct drm_atomic_state *state,
struct drm_connector *connector)
{
unsigned int index = drm_connector_index(connector);
s32 __user *fence_ptr;
fence_ptr = state->connectors[index].out_fence_ptr;
state->connectors[index].out_fence_ptr = NULL;
return fence_ptr;
}
static int
drm_atomic_replace_property_blob_from_id(struct drm_device *dev,
struct drm_property_blob **blob,
uint64_t blob_id,
ssize_t expected_size,
ssize_t expected_elem_size,
bool *replaced)
{
struct drm_property_blob *new_blob = NULL;
if (blob_id != 0) {
new_blob = drm_property_lookup_blob(dev, blob_id);
if (new_blob == NULL)
return -EINVAL;
if (expected_size > 0 &&
new_blob->length != expected_size) {
drm_property_blob_put(new_blob);
return -EINVAL;
}
if (expected_elem_size > 0 &&
new_blob->length % expected_elem_size != 0) {
drm_property_blob_put(new_blob);
return -EINVAL;
}
}
*replaced |= drm_property_replace_blob(blob, new_blob);
drm_property_blob_put(new_blob);
return 0;
}
static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
struct drm_crtc_state *state, struct drm_property *property,
uint64_t val)
{
struct drm_device *dev = crtc->dev;
struct drm_mode_config *config = &dev->mode_config;
bool replaced = false;
int ret;
if (property == config->prop_active)
state->active = val;
else if (property == config->prop_mode_id) {
struct drm_property_blob *mode =
drm_property_lookup_blob(dev, val);
ret = drm_atomic_set_mode_prop_for_crtc(state, mode);
drm_property_blob_put(mode);
return ret;
} else if (property == config->prop_vrr_enabled) {
state->vrr_enabled = val;
} else if (property == config->degamma_lut_property) {
ret = drm_atomic_replace_property_blob_from_id(dev,
&state->degamma_lut,
val,
-1, sizeof(struct drm_color_lut),
&replaced);
state->color_mgmt_changed |= replaced;
return ret;
} else if (property == config->ctm_property) {
ret = drm_atomic_replace_property_blob_from_id(dev,
&state->ctm,
val,
sizeof(struct drm_color_ctm), -1,
&replaced);
state->color_mgmt_changed |= replaced;
return ret;
} else if (property == config->gamma_lut_property) {
ret = drm_atomic_replace_property_blob_from_id(dev,
&state->gamma_lut,
val,
-1, sizeof(struct drm_color_lut),
&replaced);
state->color_mgmt_changed |= replaced;
return ret;
} else if (property == config->prop_out_fence_ptr) {
s32 __user *fence_ptr = u64_to_user_ptr(val);
if (!fence_ptr)
return 0;
if (put_user(-1, fence_ptr))
return -EFAULT;
set_out_fence_for_crtc(state->state, crtc, fence_ptr);
} else if (crtc->funcs->atomic_set_property) {
return crtc->funcs->atomic_set_property(crtc, state, property, val);
} else {
DRM_DEBUG_ATOMIC("[CRTC:%d:%s] unknown property [PROP:%d:%s]]\n",
crtc->base.id, crtc->name,
property->base.id, property->name);
return -EINVAL;
}
return 0;
}
static int
drm_atomic_crtc_get_property(struct drm_crtc *crtc,
const struct drm_crtc_state *state,
struct drm_property *property, uint64_t *val)
{
struct drm_device *dev = crtc->dev;
struct drm_mode_config *config = &dev->mode_config;
if (property == config->prop_active)
drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 17:50:19 +03:00
*val = drm_atomic_crtc_effectively_active(state);
else if (property == config->prop_mode_id)
*val = (state->mode_blob) ? state->mode_blob->base.id : 0;
else if (property == config->prop_vrr_enabled)
*val = state->vrr_enabled;
else if (property == config->degamma_lut_property)
*val = (state->degamma_lut) ? state->degamma_lut->base.id : 0;
else if (property == config->ctm_property)
*val = (state->ctm) ? state->ctm->base.id : 0;
else if (property == config->gamma_lut_property)
*val = (state->gamma_lut) ? state->gamma_lut->base.id : 0;
else if (property == config->prop_out_fence_ptr)
*val = 0;
else if (crtc->funcs->atomic_get_property)
return crtc->funcs->atomic_get_property(crtc, state, property, val);
else
return -EINVAL;
return 0;
}
static int drm_atomic_plane_set_property(struct drm_plane *plane,
struct drm_plane_state *state, struct drm_file *file_priv,
struct drm_property *property, uint64_t val)
{
struct drm_device *dev = plane->dev;
struct drm_mode_config *config = &dev->mode_config;
bool replaced = false;
int ret;
if (property == config->prop_fb_id) {
struct drm_framebuffer *fb;
fb = drm_framebuffer_lookup(dev, file_priv, val);
drm_atomic_set_fb_for_plane(state, fb);
if (fb)
drm_framebuffer_put(fb);
} else if (property == config->prop_in_fence_fd) {
if (state->fence)
return -EINVAL;
if (U642I64(val) == -1)
return 0;
state->fence = sync_file_get_fence(val);
if (!state->fence)
return -EINVAL;
} else if (property == config->prop_crtc_id) {
struct drm_crtc *crtc = drm_crtc_find(dev, file_priv, val);
if (val && !crtc)
return -EACCES;
return drm_atomic_set_crtc_for_plane(state, crtc);
} else if (property == config->prop_crtc_x) {
state->crtc_x = U642I64(val);
} else if (property == config->prop_crtc_y) {
state->crtc_y = U642I64(val);
} else if (property == config->prop_crtc_w) {
state->crtc_w = val;
} else if (property == config->prop_crtc_h) {
state->crtc_h = val;
} else if (property == config->prop_src_x) {
state->src_x = val;
} else if (property == config->prop_src_y) {
state->src_y = val;
} else if (property == config->prop_src_w) {
state->src_w = val;
} else if (property == config->prop_src_h) {
state->src_h = val;
} else if (property == plane->alpha_property) {
state->alpha = val;
} else if (property == plane->blend_mode_property) {
state->pixel_blend_mode = val;
} else if (property == plane->rotation_property) {
if (!is_power_of_2(val & DRM_MODE_ROTATE_MASK)) {
DRM_DEBUG_ATOMIC("[PLANE:%d:%s] bad rotation bitmask: 0x%llx\n",
plane->base.id, plane->name, val);
return -EINVAL;
}
state->rotation = val;
} else if (property == plane->zpos_property) {
state->zpos = val;
} else if (property == plane->color_encoding_property) {
state->color_encoding = val;
} else if (property == plane->color_range_property) {
state->color_range = val;
} else if (property == config->prop_fb_damage_clips) {
ret = drm_atomic_replace_property_blob_from_id(dev,
&state->fb_damage_clips,
val,
-1,
sizeof(struct drm_rect),
&replaced);
return ret;
} else if (plane->funcs->atomic_set_property) {
return plane->funcs->atomic_set_property(plane, state,
property, val);
} else {
DRM_DEBUG_ATOMIC("[PLANE:%d:%s] unknown property [PROP:%d:%s]]\n",
plane->base.id, plane->name,
property->base.id, property->name);
return -EINVAL;
}
return 0;
}
static int
drm_atomic_plane_get_property(struct drm_plane *plane,
const struct drm_plane_state *state,
struct drm_property *property, uint64_t *val)
{
struct drm_device *dev = plane->dev;
struct drm_mode_config *config = &dev->mode_config;
if (property == config->prop_fb_id) {
*val = (state->fb) ? state->fb->base.id : 0;
} else if (property == config->prop_in_fence_fd) {
*val = -1;
} else if (property == config->prop_crtc_id) {
*val = (state->crtc) ? state->crtc->base.id : 0;
} else if (property == config->prop_crtc_x) {
*val = I642U64(state->crtc_x);
} else if (property == config->prop_crtc_y) {
*val = I642U64(state->crtc_y);
} else if (property == config->prop_crtc_w) {
*val = state->crtc_w;
} else if (property == config->prop_crtc_h) {
*val = state->crtc_h;
} else if (property == config->prop_src_x) {
*val = state->src_x;
} else if (property == config->prop_src_y) {
*val = state->src_y;
} else if (property == config->prop_src_w) {
*val = state->src_w;
} else if (property == config->prop_src_h) {
*val = state->src_h;
} else if (property == plane->alpha_property) {
*val = state->alpha;
} else if (property == plane->blend_mode_property) {
*val = state->pixel_blend_mode;
} else if (property == plane->rotation_property) {
*val = state->rotation;
} else if (property == plane->zpos_property) {
*val = state->zpos;
} else if (property == plane->color_encoding_property) {
*val = state->color_encoding;
} else if (property == plane->color_range_property) {
*val = state->color_range;
} else if (property == config->prop_fb_damage_clips) {
*val = (state->fb_damage_clips) ?
state->fb_damage_clips->base.id : 0;
} else if (plane->funcs->atomic_get_property) {
return plane->funcs->atomic_get_property(plane, state, property, val);
} else {
return -EINVAL;
}
return 0;
}
static int drm_atomic_set_writeback_fb_for_connector(
struct drm_connector_state *conn_state,
struct drm_framebuffer *fb)
{
drm: writeback: Add job prepare and cleanup operations As writeback jobs contain a framebuffer, drivers may need to prepare and cleanup them the same way they can prepare and cleanup framebuffers for planes. Add two new optional connector helper operations, .prepare_writeback_job() and .cleanup_writeback_job() to support this. The job prepare operation is called from drm_atomic_helper_prepare_planes() to avoid a new atomic commit helper that would need to be called by all drivers not using drm_atomic_helper_commit(). The job cleanup operation is called from the existing drm_writeback_cleanup_job() function, invoked both when destroying the job as part of a aborted commit, or when the job completes. The drm_writeback_job structure is extended with a priv field to let drivers store per-job data, such as mappings related to the writeback framebuffer. For internal plumbing reasons the drm_writeback_job structure needs to store a back-pointer to the drm_writeback_connector. To avoid pushing too much writeback-specific knowledge to drm_atomic_uapi.c, create a drm_writeback_set_fb() function, move the writeback job setup code there, and set the connector backpointer. The prepare_signaling() function doesn't need to allocate writeback jobs and can ignore connectors without a job, as it is called after the writeback jobs are allocated to store framebuffers, and a writeback fence with a framebuffer is an invalid configuration that gets rejected by the commit check. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
2019-02-21 04:01:38 +03:00
int ret;
drm: writeback: Add job prepare and cleanup operations As writeback jobs contain a framebuffer, drivers may need to prepare and cleanup them the same way they can prepare and cleanup framebuffers for planes. Add two new optional connector helper operations, .prepare_writeback_job() and .cleanup_writeback_job() to support this. The job prepare operation is called from drm_atomic_helper_prepare_planes() to avoid a new atomic commit helper that would need to be called by all drivers not using drm_atomic_helper_commit(). The job cleanup operation is called from the existing drm_writeback_cleanup_job() function, invoked both when destroying the job as part of a aborted commit, or when the job completes. The drm_writeback_job structure is extended with a priv field to let drivers store per-job data, such as mappings related to the writeback framebuffer. For internal plumbing reasons the drm_writeback_job structure needs to store a back-pointer to the drm_writeback_connector. To avoid pushing too much writeback-specific knowledge to drm_atomic_uapi.c, create a drm_writeback_set_fb() function, move the writeback job setup code there, and set the connector backpointer. The prepare_signaling() function doesn't need to allocate writeback jobs and can ignore connectors without a job, as it is called after the writeback jobs are allocated to store framebuffers, and a writeback fence with a framebuffer is an invalid configuration that gets rejected by the commit check. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
2019-02-21 04:01:38 +03:00
ret = drm_writeback_set_fb(conn_state, fb);
if (ret < 0)
return ret;
if (fb)
DRM_DEBUG_ATOMIC("Set [FB:%d] for connector state %p\n",
fb->base.id, conn_state);
else
DRM_DEBUG_ATOMIC("Set [NOFB] for connector state %p\n",
conn_state);
return 0;
}
static int drm_atomic_connector_set_property(struct drm_connector *connector,
struct drm_connector_state *state, struct drm_file *file_priv,
struct drm_property *property, uint64_t val)
{
struct drm_device *dev = connector->dev;
struct drm_mode_config *config = &dev->mode_config;
bool replaced = false;
int ret;
if (property == config->prop_crtc_id) {
struct drm_crtc *crtc = drm_crtc_find(dev, file_priv, val);
if (val && !crtc)
return -EACCES;
return drm_atomic_set_crtc_for_connector(state, crtc);
} else if (property == config->dpms_property) {
/* setting DPMS property requires special handling, which
* is done in legacy setprop path for us. Disallow (for
* now?) atomic writes to DPMS property:
*/
return -EINVAL;
} else if (property == config->tv_select_subconnector_property) {
state->tv.subconnector = val;
} else if (property == config->tv_left_margin_property) {
state->tv.margins.left = val;
} else if (property == config->tv_right_margin_property) {
state->tv.margins.right = val;
} else if (property == config->tv_top_margin_property) {
state->tv.margins.top = val;
} else if (property == config->tv_bottom_margin_property) {
state->tv.margins.bottom = val;
} else if (property == config->tv_mode_property) {
state->tv.mode = val;
} else if (property == config->tv_brightness_property) {
state->tv.brightness = val;
} else if (property == config->tv_contrast_property) {
state->tv.contrast = val;
} else if (property == config->tv_flicker_reduction_property) {
state->tv.flicker_reduction = val;
} else if (property == config->tv_overscan_property) {
state->tv.overscan = val;
} else if (property == config->tv_saturation_property) {
state->tv.saturation = val;
} else if (property == config->tv_hue_property) {
state->tv.hue = val;
} else if (property == config->link_status_property) {
/* Never downgrade from GOOD to BAD on userspace's request here,
* only hw issues can do that.
*
* For an atomic property the userspace doesn't need to be able
* to understand all the properties, but needs to be able to
* restore the state it wants on VT switch. So if the userspace
* tries to change the link_status from GOOD to BAD, driver
* silently rejects it and returns a 0. This prevents userspace
* from accidently breaking the display when it restores the
* state.
*/
if (state->link_status != DRM_LINK_STATUS_GOOD)
state->link_status = val;
} else if (property == config->hdr_output_metadata_property) {
ret = drm_atomic_replace_property_blob_from_id(dev,
&state->hdr_output_metadata,
val,
sizeof(struct hdr_output_metadata), -1,
&replaced);
return ret;
} else if (property == config->aspect_ratio_property) {
state->picture_aspect_ratio = val;
} else if (property == config->content_type_property) {
state->content_type = val;
} else if (property == connector->scaling_mode_property) {
state->scaling_mode = val;
} else if (property == config->content_protection_property) {
if (val == DRM_MODE_CONTENT_PROTECTION_ENABLED) {
DRM_DEBUG_KMS("only drivers can set CP Enabled\n");
return -EINVAL;
}
state->content_protection = val;
drm: Add Content protection type property This patch adds a DRM ENUM property to the selected connectors. This property is used for mentioning the protected content's type from userspace to kernel HDCP authentication. Type of the stream is decided by the protected content providers. Type 0 content can be rendered on any HDCP protected display wires. But Type 1 content can be rendered only on HDCP2.2 protected paths. So when a userspace sets this property to Type 1 and starts the HDCP enable, kernel will honour it only if HDCP2.2 authentication is through for type 1. Else HDCP enable will be failed. Pekka have completed the Weston DRM-backend review in https://gitlab.freedesktop.org/wayland/weston/merge_requests/48 and the UAPI for HDCP 2.2 looks good. The userspace is accepted in Weston. v2: cp_content_type is replaced with content_protection_type [daniel] check at atomic_set_property is removed [Maarten] v3: %s/content_protection_type/hdcp_content_type [Pekka] v4: property is created for the first requested connector and then reused. [Danvet] v5: kernel doc nits addressed [Daniel] Rebased as part of patch reordering. v6: Kernel docs are modified [pekka] v7: More details in Kernel docs. [pekka] v8: Few more clarification into kernel doc of content type [pekka] v9: Small fixes in coding style. v10: Moving DRM_MODE_HDCP_CONTENT_TYPEx definition to drm_hdcp.h [pekka] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/320957/?series=57232&rev=14
2019-08-01 14:41:14 +03:00
} else if (property == config->hdcp_content_type_property) {
state->hdcp_content_type = val;
drm: Add HDMI colorspace property Create a new connector property to program colorspace to sink devices. Modern sink devices support more than 1 type of colorspace like 601, 709, BT2020 etc. This helps to switch based on content type which is to be displayed. The decision lies with compositors as to in which scenarios, a particular colorspace will be picked. This will be helpful mostly to switch to higher gamut colorspaces like BT2020 when the media content is encoded as BT2020. Thereby giving a good visual experience to users. The expectation from userspace is that it should parse the EDID and get supported colorspaces. Use this property and switch to the one supported. Sink supported colorspaces should be retrieved by userspace from EDID and driver will not explicitly expose them. Basically the expectation from userspace is: - Set up CRTC DEGAMMA/CTM/GAMMA to convert to some sink colorspace - Set this new property to let the sink know what it converted the CRTC output to. v2: Addressed Maarten and Ville's review comments. Enhanced the colorspace enum to incorporate both HDMI and DP supported colorspaces. Also, added a default option for colorspace. v3: Removed Adobe references from enum definitions as per Ville, Hans Verkuil and Jonas Karlman suggestions. Changed Default to an unset state where driver will assign the colorspace is not chosen by user, suggested by Ville and Maarten. Addressed other misc review comments from Maarten. Split the changes to have separate colorspace property for DP and HDMI. v4: Addressed Chris and Ville's review comments, and created a common colorspace property for DP and HDMI, filtered the list based on the colorspaces supported by the respective protocol standard. v5: Made the property creation helper accept enum list based on platform capabilties as suggested by Shashank. Consolidated HDMI and DP property creation in the common helper. v6: Addressed Shashank's review comments. v7: Added defines instead of enum in uapi as per Brian Starkey's suggestion in order to go with string matching at userspace. Updated the commit message to add more details as well kernel docs. v8: Addressed Maarten's review comments. v9: Removed macro defines from uapi as per Brian Starkey and Daniel Stone's comments and moved to drm include file. Moved back to older design with exposing all HDMI colorspaces to userspace since infoframe capability is there even on legacy platforms, as per Ville's review comments. v10: Fixed sparse warnings, updated the RB from Maarten and Jani's ack. v11: Addressed Ville's review comments. Updated the Macro naming and added DCI-P3 colorspace as well, defined in CTA 861.G spec. v12: Appended BT709 and SMPTE 170M with YCC information as per Ville's review comment to be clear and not to be confused with RGB. v13: Reorder the colorspace macros. v14: Removed DP as of now, will be added later once full support is enabled, as per Ville's suggestion. Added Ville's RB. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1550596381-993-2-git-send-email-uma.shankar@intel.com
2019-02-19 20:12:59 +03:00
} else if (property == connector->colorspace_property) {
state->colorspace = val;
} else if (property == config->writeback_fb_id_property) {
struct drm_framebuffer *fb;
int ret;
fb = drm_framebuffer_lookup(dev, file_priv, val);
ret = drm_atomic_set_writeback_fb_for_connector(state, fb);
if (fb)
drm_framebuffer_put(fb);
return ret;
} else if (property == config->writeback_out_fence_ptr_property) {
s32 __user *fence_ptr = u64_to_user_ptr(val);
return set_out_fence_for_connector(state->state, connector,
fence_ptr);
drm: Add connector property to limit max bpc At times 12bpc HDMI cannot be driven due to faulty cables, dongles level shifters etc. To workaround them we may need to drive the output at a lower bpc. Currently the user space does not have a way to limit the bpc. The default bpc to be programmed is decided by the driver and is run against connector limitations. Creating a new connector property "max bpc" in order to limit the bpc. xrandr can make use of this connector property to make sure that bpc does not exceed the configured value. This property can be used by userspace to set the bpc. V2: Initialize max_bpc to satisfy kms_properties V3: Move the property to drm_connector V4: Split drm and i915 components(Ville) V5: Make the property per connector(Ville) V6: Compare the requested bpc to connector bpc(Daniel) Move the attach_property function to core(Ville) V7: Fix checkpatch warnings V8: Simplify the connector check code(Ville) V9: Const display_info(Ville) V10,V11: Fix CI issues. V12: Add the Kernel documentation(Daniel) V14: Crossreference the function name in the doc(Daniel) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kishore Kadiyala <kishore.kadiyala@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Sunpeng Li <sunpeng.li@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181012184233.29250-1-radhakrishna.sripada@intel.com
2018-10-12 21:42:32 +03:00
} else if (property == connector->max_bpc_property) {
state->max_requested_bpc = val;
} else if (connector->funcs->atomic_set_property) {
return connector->funcs->atomic_set_property(connector,
state, property, val);
} else {
DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] unknown property [PROP:%d:%s]]\n",
connector->base.id, connector->name,
property->base.id, property->name);
return -EINVAL;
}
return 0;
}
static int
drm_atomic_connector_get_property(struct drm_connector *connector,
const struct drm_connector_state *state,
struct drm_property *property, uint64_t *val)
{
struct drm_device *dev = connector->dev;
struct drm_mode_config *config = &dev->mode_config;
if (property == config->prop_crtc_id) {
*val = (state->crtc) ? state->crtc->base.id : 0;
} else if (property == config->dpms_property) {
drm: Add helpers to kick off self refresh mode in drivers This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-12 17:50:19 +03:00
if (state->crtc && state->crtc->state->self_refresh_active)
*val = DRM_MODE_DPMS_ON;
else
*val = connector->dpms;
} else if (property == config->tv_select_subconnector_property) {
*val = state->tv.subconnector;
} else if (property == config->tv_left_margin_property) {
*val = state->tv.margins.left;
} else if (property == config->tv_right_margin_property) {
*val = state->tv.margins.right;
} else if (property == config->tv_top_margin_property) {
*val = state->tv.margins.top;
} else if (property == config->tv_bottom_margin_property) {
*val = state->tv.margins.bottom;
} else if (property == config->tv_mode_property) {
*val = state->tv.mode;
} else if (property == config->tv_brightness_property) {
*val = state->tv.brightness;
} else if (property == config->tv_contrast_property) {
*val = state->tv.contrast;
} else if (property == config->tv_flicker_reduction_property) {
*val = state->tv.flicker_reduction;
} else if (property == config->tv_overscan_property) {
*val = state->tv.overscan;
} else if (property == config->tv_saturation_property) {
*val = state->tv.saturation;
} else if (property == config->tv_hue_property) {
*val = state->tv.hue;
} else if (property == config->link_status_property) {
*val = state->link_status;
} else if (property == config->aspect_ratio_property) {
*val = state->picture_aspect_ratio;
} else if (property == config->content_type_property) {
*val = state->content_type;
drm: Add HDMI colorspace property Create a new connector property to program colorspace to sink devices. Modern sink devices support more than 1 type of colorspace like 601, 709, BT2020 etc. This helps to switch based on content type which is to be displayed. The decision lies with compositors as to in which scenarios, a particular colorspace will be picked. This will be helpful mostly to switch to higher gamut colorspaces like BT2020 when the media content is encoded as BT2020. Thereby giving a good visual experience to users. The expectation from userspace is that it should parse the EDID and get supported colorspaces. Use this property and switch to the one supported. Sink supported colorspaces should be retrieved by userspace from EDID and driver will not explicitly expose them. Basically the expectation from userspace is: - Set up CRTC DEGAMMA/CTM/GAMMA to convert to some sink colorspace - Set this new property to let the sink know what it converted the CRTC output to. v2: Addressed Maarten and Ville's review comments. Enhanced the colorspace enum to incorporate both HDMI and DP supported colorspaces. Also, added a default option for colorspace. v3: Removed Adobe references from enum definitions as per Ville, Hans Verkuil and Jonas Karlman suggestions. Changed Default to an unset state where driver will assign the colorspace is not chosen by user, suggested by Ville and Maarten. Addressed other misc review comments from Maarten. Split the changes to have separate colorspace property for DP and HDMI. v4: Addressed Chris and Ville's review comments, and created a common colorspace property for DP and HDMI, filtered the list based on the colorspaces supported by the respective protocol standard. v5: Made the property creation helper accept enum list based on platform capabilties as suggested by Shashank. Consolidated HDMI and DP property creation in the common helper. v6: Addressed Shashank's review comments. v7: Added defines instead of enum in uapi as per Brian Starkey's suggestion in order to go with string matching at userspace. Updated the commit message to add more details as well kernel docs. v8: Addressed Maarten's review comments. v9: Removed macro defines from uapi as per Brian Starkey and Daniel Stone's comments and moved to drm include file. Moved back to older design with exposing all HDMI colorspaces to userspace since infoframe capability is there even on legacy platforms, as per Ville's review comments. v10: Fixed sparse warnings, updated the RB from Maarten and Jani's ack. v11: Addressed Ville's review comments. Updated the Macro naming and added DCI-P3 colorspace as well, defined in CTA 861.G spec. v12: Appended BT709 and SMPTE 170M with YCC information as per Ville's review comment to be clear and not to be confused with RGB. v13: Reorder the colorspace macros. v14: Removed DP as of now, will be added later once full support is enabled, as per Ville's suggestion. Added Ville's RB. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1550596381-993-2-git-send-email-uma.shankar@intel.com
2019-02-19 20:12:59 +03:00
} else if (property == connector->colorspace_property) {
*val = state->colorspace;
} else if (property == connector->scaling_mode_property) {
*val = state->scaling_mode;
} else if (property == config->hdr_output_metadata_property) {
*val = state->hdr_output_metadata ?
state->hdr_output_metadata->base.id : 0;
} else if (property == config->content_protection_property) {
*val = state->content_protection;
drm: Add Content protection type property This patch adds a DRM ENUM property to the selected connectors. This property is used for mentioning the protected content's type from userspace to kernel HDCP authentication. Type of the stream is decided by the protected content providers. Type 0 content can be rendered on any HDCP protected display wires. But Type 1 content can be rendered only on HDCP2.2 protected paths. So when a userspace sets this property to Type 1 and starts the HDCP enable, kernel will honour it only if HDCP2.2 authentication is through for type 1. Else HDCP enable will be failed. Pekka have completed the Weston DRM-backend review in https://gitlab.freedesktop.org/wayland/weston/merge_requests/48 and the UAPI for HDCP 2.2 looks good. The userspace is accepted in Weston. v2: cp_content_type is replaced with content_protection_type [daniel] check at atomic_set_property is removed [Maarten] v3: %s/content_protection_type/hdcp_content_type [Pekka] v4: property is created for the first requested connector and then reused. [Danvet] v5: kernel doc nits addressed [Daniel] Rebased as part of patch reordering. v6: Kernel docs are modified [pekka] v7: More details in Kernel docs. [pekka] v8: Few more clarification into kernel doc of content type [pekka] v9: Small fixes in coding style. v10: Moving DRM_MODE_HDCP_CONTENT_TYPEx definition to drm_hdcp.h [pekka] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/320957/?series=57232&rev=14
2019-08-01 14:41:14 +03:00
} else if (property == config->hdcp_content_type_property) {
*val = state->hdcp_content_type;
} else if (property == config->writeback_fb_id_property) {
/* Writeback framebuffer is one-shot, write and forget */
*val = 0;
} else if (property == config->writeback_out_fence_ptr_property) {
*val = 0;
drm: Add connector property to limit max bpc At times 12bpc HDMI cannot be driven due to faulty cables, dongles level shifters etc. To workaround them we may need to drive the output at a lower bpc. Currently the user space does not have a way to limit the bpc. The default bpc to be programmed is decided by the driver and is run against connector limitations. Creating a new connector property "max bpc" in order to limit the bpc. xrandr can make use of this connector property to make sure that bpc does not exceed the configured value. This property can be used by userspace to set the bpc. V2: Initialize max_bpc to satisfy kms_properties V3: Move the property to drm_connector V4: Split drm and i915 components(Ville) V5: Make the property per connector(Ville) V6: Compare the requested bpc to connector bpc(Daniel) Move the attach_property function to core(Ville) V7: Fix checkpatch warnings V8: Simplify the connector check code(Ville) V9: Const display_info(Ville) V10,V11: Fix CI issues. V12: Add the Kernel documentation(Daniel) V14: Crossreference the function name in the doc(Daniel) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kishore Kadiyala <kishore.kadiyala@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Sunpeng Li <sunpeng.li@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181012184233.29250-1-radhakrishna.sripada@intel.com
2018-10-12 21:42:32 +03:00
} else if (property == connector->max_bpc_property) {
*val = state->max_requested_bpc;
} else if (connector->funcs->atomic_get_property) {
return connector->funcs->atomic_get_property(connector,
state, property, val);
} else {
return -EINVAL;
}
return 0;
}
int drm_atomic_get_property(struct drm_mode_object *obj,
struct drm_property *property, uint64_t *val)
{
struct drm_device *dev = property->dev;
int ret;
switch (obj->type) {
case DRM_MODE_OBJECT_CONNECTOR: {
struct drm_connector *connector = obj_to_connector(obj);
WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
ret = drm_atomic_connector_get_property(connector,
connector->state, property, val);
break;
}
case DRM_MODE_OBJECT_CRTC: {
struct drm_crtc *crtc = obj_to_crtc(obj);
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
ret = drm_atomic_crtc_get_property(crtc,
crtc->state, property, val);
break;
}
case DRM_MODE_OBJECT_PLANE: {
struct drm_plane *plane = obj_to_plane(obj);
WARN_ON(!drm_modeset_is_locked(&plane->mutex));
ret = drm_atomic_plane_get_property(plane,
plane->state, property, val);
break;
}
default:
ret = -EINVAL;
break;
}
return ret;
}
/*
* The big monster ioctl
*/
static struct drm_pending_vblank_event *create_vblank_event(
struct drm_crtc *crtc, uint64_t user_data)
{
struct drm_pending_vblank_event *e = NULL;
e = kzalloc(sizeof *e, GFP_KERNEL);
if (!e)
return NULL;
e->event.base.type = DRM_EVENT_FLIP_COMPLETE;
e->event.base.length = sizeof(e->event);
e->event.vbl.crtc_id = crtc->base.id;
e->event.vbl.user_data = user_data;
return e;
}
int drm_atomic_connector_commit_dpms(struct drm_atomic_state *state,
struct drm_connector *connector,
int mode)
{
struct drm_connector *tmp_connector;
struct drm_connector_state *new_conn_state;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
int i, ret, old_mode = connector->dpms;
bool active = false;
ret = drm_modeset_lock(&state->dev->mode_config.connection_mutex,
state->acquire_ctx);
if (ret)
return ret;
if (mode != DRM_MODE_DPMS_ON)
mode = DRM_MODE_DPMS_OFF;
connector->dpms = mode;
crtc = connector->state->crtc;
if (!crtc)
goto out;
ret = drm_atomic_add_affected_connectors(state, crtc);
if (ret)
goto out;
crtc_state = drm_atomic_get_crtc_state(state, crtc);
if (IS_ERR(crtc_state)) {
ret = PTR_ERR(crtc_state);
goto out;
}
for_each_new_connector_in_state(state, tmp_connector, new_conn_state, i) {
if (new_conn_state->crtc != crtc)
continue;
if (tmp_connector->dpms == DRM_MODE_DPMS_ON) {
active = true;
break;
}
}
crtc_state->active = active;
ret = drm_atomic_commit(state);
out:
if (ret != 0)
connector->dpms = old_mode;
return ret;
}
int drm_atomic_set_property(struct drm_atomic_state *state,
struct drm_file *file_priv,
struct drm_mode_object *obj,
struct drm_property *prop,
uint64_t prop_value)
{
struct drm_mode_object *ref;
int ret;
if (!drm_property_change_valid_get(prop, prop_value, &ref))
return -EINVAL;
switch (obj->type) {
case DRM_MODE_OBJECT_CONNECTOR: {
struct drm_connector *connector = obj_to_connector(obj);
struct drm_connector_state *connector_state;
connector_state = drm_atomic_get_connector_state(state, connector);
if (IS_ERR(connector_state)) {
ret = PTR_ERR(connector_state);
break;
}
ret = drm_atomic_connector_set_property(connector,
connector_state, file_priv,
prop, prop_value);
break;
}
case DRM_MODE_OBJECT_CRTC: {
struct drm_crtc *crtc = obj_to_crtc(obj);
struct drm_crtc_state *crtc_state;
crtc_state = drm_atomic_get_crtc_state(state, crtc);
if (IS_ERR(crtc_state)) {
ret = PTR_ERR(crtc_state);
break;
}
ret = drm_atomic_crtc_set_property(crtc,
crtc_state, prop, prop_value);
break;
}
case DRM_MODE_OBJECT_PLANE: {
struct drm_plane *plane = obj_to_plane(obj);
struct drm_plane_state *plane_state;
plane_state = drm_atomic_get_plane_state(state, plane);
if (IS_ERR(plane_state)) {
ret = PTR_ERR(plane_state);
break;
}
ret = drm_atomic_plane_set_property(plane,
plane_state, file_priv,
prop, prop_value);
break;
}
default:
ret = -EINVAL;
break;
}
drm_property_change_valid_put(prop, ref);
return ret;
}
/**
* DOC: explicit fencing properties
*
* Explicit fencing allows userspace to control the buffer synchronization
* between devices. A Fence or a group of fences are transfered to/from
* userspace using Sync File fds and there are two DRM properties for that.
* IN_FENCE_FD on each DRM Plane to send fences to the kernel and
* OUT_FENCE_PTR on each DRM CRTC to receive fences from the kernel.
*
* As a contrast, with implicit fencing the kernel keeps track of any
* ongoing rendering, and automatically ensures that the atomic update waits
* for any pending rendering to complete. For shared buffers represented with
* a &struct dma_buf this is tracked in &struct dma_resv.
* Implicit syncing is how Linux traditionally worked (e.g. DRI2/3 on X.org),
* whereas explicit fencing is what Android wants.
*
* "IN_FENCE_FD”:
* Use this property to pass a fence that DRM should wait on before
* proceeding with the Atomic Commit request and show the framebuffer for
* the plane on the screen. The fence can be either a normal fence or a
* merged one, the sync_file framework will handle both cases and use a
* fence_array if a merged fence is received. Passing -1 here means no
* fences to wait on.
*
* If the Atomic Commit request has the DRM_MODE_ATOMIC_TEST_ONLY flag
* it will only check if the Sync File is a valid one.
*
* On the driver side the fence is stored on the @fence parameter of
* &struct drm_plane_state. Drivers which also support implicit fencing
* should set the implicit fence using drm_atomic_set_fence_for_plane(),
* to make sure there's consistent behaviour between drivers in precedence
* of implicit vs. explicit fencing.
*
* "OUT_FENCE_PTR”:
* Use this property to pass a file descriptor pointer to DRM. Once the
* Atomic Commit request call returns OUT_FENCE_PTR will be filled with
* the file descriptor number of a Sync File. This Sync File contains the
* CRTC fence that will be signaled when all framebuffers present on the
* Atomic Commit * request for that given CRTC are scanned out on the
* screen.
*
* The Atomic Commit request fails if a invalid pointer is passed. If the
* Atomic Commit request fails for any other reason the out fence fd
* returned will be -1. On a Atomic Commit with the
* DRM_MODE_ATOMIC_TEST_ONLY flag the out fence will also be set to -1.
*
* Note that out-fences don't have a special interface to drivers and are
* internally represented by a &struct drm_pending_vblank_event in struct
* &drm_crtc_state, which is also used by the nonblocking atomic commit
* helpers and for the DRM event handling for existing userspace.
*/
struct drm_out_fence_state {
s32 __user *out_fence_ptr;
struct sync_file *sync_file;
int fd;
};
static int setup_out_fence(struct drm_out_fence_state *fence_state,
struct dma_fence *fence)
{
fence_state->fd = get_unused_fd_flags(O_CLOEXEC);
if (fence_state->fd < 0)
return fence_state->fd;
if (put_user(fence_state->fd, fence_state->out_fence_ptr))
return -EFAULT;
fence_state->sync_file = sync_file_create(fence);
if (!fence_state->sync_file)
return -ENOMEM;
return 0;
}
static int prepare_signaling(struct drm_device *dev,
struct drm_atomic_state *state,
struct drm_mode_atomic *arg,
struct drm_file *file_priv,
struct drm_out_fence_state **fence_state,
unsigned int *num_fences)
{
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
struct drm_connector *conn;
struct drm_connector_state *conn_state;
int i, c = 0, ret;
if (arg->flags & DRM_MODE_ATOMIC_TEST_ONLY)
return 0;
for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
s32 __user *fence_ptr;
fence_ptr = get_out_fence_for_crtc(crtc_state->state, crtc);
if (arg->flags & DRM_MODE_PAGE_FLIP_EVENT || fence_ptr) {
struct drm_pending_vblank_event *e;
e = create_vblank_event(crtc, arg->user_data);
if (!e)
return -ENOMEM;
crtc_state->event = e;
}
if (arg->flags & DRM_MODE_PAGE_FLIP_EVENT) {
struct drm_pending_vblank_event *e = crtc_state->event;
if (!file_priv)
continue;
ret = drm_event_reserve_init(dev, file_priv, &e->base,
&e->event.base);
if (ret) {
kfree(e);
crtc_state->event = NULL;
return ret;
}
}
if (fence_ptr) {
struct dma_fence *fence;
struct drm_out_fence_state *f;
f = krealloc(*fence_state, sizeof(**fence_state) *
(*num_fences + 1), GFP_KERNEL);
if (!f)
return -ENOMEM;
memset(&f[*num_fences], 0, sizeof(*f));
f[*num_fences].out_fence_ptr = fence_ptr;
*fence_state = f;
fence = drm_crtc_create_fence(crtc);
if (!fence)
return -ENOMEM;
ret = setup_out_fence(&f[(*num_fences)++], fence);
if (ret) {
dma_fence_put(fence);
return ret;
}
crtc_state->event->base.fence = fence;
}
c++;
}
for_each_new_connector_in_state(state, conn, conn_state, i) {
struct drm_writeback_connector *wb_conn;
struct drm_out_fence_state *f;
struct dma_fence *fence;
s32 __user *fence_ptr;
drm: writeback: Add job prepare and cleanup operations As writeback jobs contain a framebuffer, drivers may need to prepare and cleanup them the same way they can prepare and cleanup framebuffers for planes. Add two new optional connector helper operations, .prepare_writeback_job() and .cleanup_writeback_job() to support this. The job prepare operation is called from drm_atomic_helper_prepare_planes() to avoid a new atomic commit helper that would need to be called by all drivers not using drm_atomic_helper_commit(). The job cleanup operation is called from the existing drm_writeback_cleanup_job() function, invoked both when destroying the job as part of a aborted commit, or when the job completes. The drm_writeback_job structure is extended with a priv field to let drivers store per-job data, such as mappings related to the writeback framebuffer. For internal plumbing reasons the drm_writeback_job structure needs to store a back-pointer to the drm_writeback_connector. To avoid pushing too much writeback-specific knowledge to drm_atomic_uapi.c, create a drm_writeback_set_fb() function, move the writeback job setup code there, and set the connector backpointer. The prepare_signaling() function doesn't need to allocate writeback jobs and can ignore connectors without a job, as it is called after the writeback jobs are allocated to store framebuffers, and a writeback fence with a framebuffer is an invalid configuration that gets rejected by the commit check. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
2019-02-21 04:01:38 +03:00
if (!conn_state->writeback_job)
continue;
fence_ptr = get_out_fence_for_connector(state, conn);
if (!fence_ptr)
continue;
f = krealloc(*fence_state, sizeof(**fence_state) *
(*num_fences + 1), GFP_KERNEL);
if (!f)
return -ENOMEM;
memset(&f[*num_fences], 0, sizeof(*f));
f[*num_fences].out_fence_ptr = fence_ptr;
*fence_state = f;
wb_conn = drm_connector_to_writeback(conn);
fence = drm_writeback_get_out_fence(wb_conn);
if (!fence)
return -ENOMEM;
ret = setup_out_fence(&f[(*num_fences)++], fence);
if (ret) {
dma_fence_put(fence);
return ret;
}
drm: writeback: Add job prepare and cleanup operations As writeback jobs contain a framebuffer, drivers may need to prepare and cleanup them the same way they can prepare and cleanup framebuffers for planes. Add two new optional connector helper operations, .prepare_writeback_job() and .cleanup_writeback_job() to support this. The job prepare operation is called from drm_atomic_helper_prepare_planes() to avoid a new atomic commit helper that would need to be called by all drivers not using drm_atomic_helper_commit(). The job cleanup operation is called from the existing drm_writeback_cleanup_job() function, invoked both when destroying the job as part of a aborted commit, or when the job completes. The drm_writeback_job structure is extended with a priv field to let drivers store per-job data, such as mappings related to the writeback framebuffer. For internal plumbing reasons the drm_writeback_job structure needs to store a back-pointer to the drm_writeback_connector. To avoid pushing too much writeback-specific knowledge to drm_atomic_uapi.c, create a drm_writeback_set_fb() function, move the writeback job setup code there, and set the connector backpointer. The prepare_signaling() function doesn't need to allocate writeback jobs and can ignore connectors without a job, as it is called after the writeback jobs are allocated to store framebuffers, and a writeback fence with a framebuffer is an invalid configuration that gets rejected by the commit check. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
2019-02-21 04:01:38 +03:00
conn_state->writeback_job->out_fence = fence;
}
/*
* Having this flag means user mode pends on event which will never
* reach due to lack of at least one CRTC for signaling
*/
if (c == 0 && (arg->flags & DRM_MODE_PAGE_FLIP_EVENT))
return -EINVAL;
return 0;
}
static void complete_signaling(struct drm_device *dev,
struct drm_atomic_state *state,
struct drm_out_fence_state *fence_state,
unsigned int num_fences,
bool install_fds)
{
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
int i;
if (install_fds) {
for (i = 0; i < num_fences; i++)
fd_install(fence_state[i].fd,
fence_state[i].sync_file->file);
kfree(fence_state);
return;
}
for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
struct drm_pending_vblank_event *event = crtc_state->event;
/*
* Free the allocated event. drm_atomic_helper_setup_commit
* can allocate an event too, so only free it if it's ours
* to prevent a double free in drm_atomic_state_clear.
*/
if (event && (event->base.fence || event->base.file_priv)) {
drm_event_cancel_free(dev, &event->base);
crtc_state->event = NULL;
}
}
if (!fence_state)
return;
for (i = 0; i < num_fences; i++) {
if (fence_state[i].sync_file)
fput(fence_state[i].sync_file->file);
if (fence_state[i].fd >= 0)
put_unused_fd(fence_state[i].fd);
/* If this fails log error to the user */
if (fence_state[i].out_fence_ptr &&
put_user(-1, fence_state[i].out_fence_ptr))
DRM_DEBUG_ATOMIC("Couldn't clear out_fence_ptr\n");
}
kfree(fence_state);
}
int drm_mode_atomic_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_atomic *arg = data;
uint32_t __user *objs_ptr = (uint32_t __user *)(unsigned long)(arg->objs_ptr);
uint32_t __user *count_props_ptr = (uint32_t __user *)(unsigned long)(arg->count_props_ptr);
uint32_t __user *props_ptr = (uint32_t __user *)(unsigned long)(arg->props_ptr);
uint64_t __user *prop_values_ptr = (uint64_t __user *)(unsigned long)(arg->prop_values_ptr);
unsigned int copied_objs, copied_props;
struct drm_atomic_state *state;
struct drm_modeset_acquire_ctx ctx;
struct drm_out_fence_state *fence_state;
int ret = 0;
unsigned int i, j, num_fences;
/* disallow for drivers not supporting atomic: */
if (!drm_core_check_feature(dev, DRIVER_ATOMIC))
return -EOPNOTSUPP;
/* disallow for userspace that has not enabled atomic cap (even
* though this may be a bit overkill, since legacy userspace
* wouldn't know how to call this ioctl)
*/
if (!file_priv->atomic)
return -EINVAL;
if (arg->flags & ~DRM_MODE_ATOMIC_FLAGS)
return -EINVAL;
if (arg->reserved)
return -EINVAL;
if (arg->flags & DRM_MODE_PAGE_FLIP_ASYNC)
return -EINVAL;
/* can't test and expect an event at the same time. */
if ((arg->flags & DRM_MODE_ATOMIC_TEST_ONLY) &&
(arg->flags & DRM_MODE_PAGE_FLIP_EVENT))
return -EINVAL;
state = drm_atomic_state_alloc(dev);
if (!state)
return -ENOMEM;
drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
state->acquire_ctx = &ctx;
state->allow_modeset = !!(arg->flags & DRM_MODE_ATOMIC_ALLOW_MODESET);
retry:
copied_objs = 0;
copied_props = 0;
fence_state = NULL;
num_fences = 0;
for (i = 0; i < arg->count_objs; i++) {
uint32_t obj_id, count_props;
struct drm_mode_object *obj;
if (get_user(obj_id, objs_ptr + copied_objs)) {
ret = -EFAULT;
goto out;
}
obj = drm_mode_object_find(dev, file_priv, obj_id, DRM_MODE_OBJECT_ANY);
if (!obj) {
ret = -ENOENT;
goto out;
}
if (!obj->properties) {
drm_mode_object_put(obj);
ret = -ENOENT;
goto out;
}
if (get_user(count_props, count_props_ptr + copied_objs)) {
drm_mode_object_put(obj);
ret = -EFAULT;
goto out;
}
copied_objs++;
for (j = 0; j < count_props; j++) {
uint32_t prop_id;
uint64_t prop_value;
struct drm_property *prop;
if (get_user(prop_id, props_ptr + copied_props)) {
drm_mode_object_put(obj);
ret = -EFAULT;
goto out;
}
prop = drm_mode_obj_find_prop_id(obj, prop_id);
if (!prop) {
drm_mode_object_put(obj);
ret = -ENOENT;
goto out;
}
if (copy_from_user(&prop_value,
prop_values_ptr + copied_props,
sizeof(prop_value))) {
drm_mode_object_put(obj);
ret = -EFAULT;
goto out;
}
ret = drm_atomic_set_property(state, file_priv,
obj, prop, prop_value);
if (ret) {
drm_mode_object_put(obj);
goto out;
}
copied_props++;
}
drm_mode_object_put(obj);
}
ret = prepare_signaling(dev, state, arg, file_priv, &fence_state,
&num_fences);
if (ret)
goto out;
if (arg->flags & DRM_MODE_ATOMIC_TEST_ONLY) {
ret = drm_atomic_check_only(state);
} else if (arg->flags & DRM_MODE_ATOMIC_NONBLOCK) {
ret = drm_atomic_nonblocking_commit(state);
} else {
if (drm_debug_enabled(DRM_UT_STATE))
drm_atomic_print_state(state);
ret = drm_atomic_commit(state);
}
out:
complete_signaling(dev, state, fence_state, num_fences, !ret);
if (ret == -EDEADLK) {
drm_atomic_state_clear(state);
ret = drm_modeset_backoff(&ctx);
if (!ret)
goto retry;
}
drm_atomic_state_put(state);
drm_modeset_drop_locks(&ctx);
drm_modeset_acquire_fini(&ctx);
return ret;
}