iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
bd48c63eb0
linux/drivers/md/md-cluster.h

33 lines
1.1 KiB
C
Raw Normal View History

Introduce md_cluster_operations to handle cluster functions This allows dynamic registering of cluster hooks. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-03-29 19:01:53 +04:00
#ifndef _MD_CLUSTER_H
#define _MD_CLUSTER_H
#include "md.h"
struct mddev;
Add new disk to clustered array Algorithm: 1. Node 1 issues mdadm --manage /dev/mdX --add /dev/sdYY which issues ioctl(ADD_NEW_DISC with disc.state set to MD_DISK_CLUSTER_ADD) 2. Node 1 sends NEWDISK with uuid and slot number 3. Other nodes issue kobject_uevent_env with uuid and slot number (Steps 4,5 could be a udev rule) 4. In userspace, the node searches for the disk, perhaps using blkid -t SUB_UUID="" 5. Other nodes issue either of the following depending on whether the disk was found: ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CANDIDATE and disc.number set to slot number) ioctl(CLUSTERED_DISK_NACK) 6. Other nodes drop lock on no-new-devs (CR) if device is found 7. Node 1 attempts EX lock on no-new-devs 8. If node 1 gets the lock, it sends METADATA_UPDATED after unmarking the disk as SpareLocal 9. If not (get no-new-dev lock), it fails the operation and sends METADATA_UPDATED 10. Other nodes understand if the device is added or not by reading the superblock again after receiving the METADATA_UPDATED message. Signed-off-by: Lidong Zhong <lzhong@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-10-30 02:51:31 +03:00
struct md_rdev;
Introduce md_cluster_operations to handle cluster functions This allows dynamic registering of cluster hooks. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-03-29 19:01:53 +04:00
struct md_cluster_operations {
Add node recovery callbacks DLM offers callbacks when a node fails and the lock remastery is performed: 1. recover_prep: called when DLM discovers a node is down 2. recover_slot: called when DLM identifies the node and recovery can start 3. recover_done: called when all nodes have completed recover_slot recover_slot() and recover_done() are also called when the node joins initially in order to inform the node with its slot number. These slot numbers start from one, so we deduct one to make it start with zero which the cluster-md code uses. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-03-30 09:42:49 +04:00
int (*join)(struct mddev *mddev, int nodes);
Introduce md_cluster_operations to handle cluster functions This allows dynamic registering of cluster hooks. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-03-29 19:01:53 +04:00
int (*leave)(struct mddev *mddev);
Add node recovery callbacks DLM offers callbacks when a node fails and the lock remastery is performed: 1. recover_prep: called when DLM discovers a node is down 2. recover_slot: called when DLM identifies the node and recovery can start 3. recover_done: called when all nodes have completed recover_slot recover_slot() and recover_done() are also called when the node joins initially in order to inform the node with its slot number. These slot numbers start from one, so we deduct one to make it start with zero which the cluster-md code uses. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-03-30 09:42:49 +04:00
int (*slot_number)(struct mddev *mddev);
md-cluster: Use a small window for resync Suspending the entire device for resync could take too long. Resync in small chunks. cluster's resync window (32M) is maintained in r1conf as cluster_sync_low and cluster_sync_high and processed in raid1's sync_request(). If the current resync is outside the cluster resync window: 1. Set the cluster_sync_low to curr_resync_completed. 2. Check if the sync will fit in the new window, if not issue a wait_barrier() and set cluster_sync_low to sector_nr. 3. Set cluster_sync_high to cluster_sync_low + resync_window. 4. Send a message to all nodes so they may add it in their suspension list. bitmap_cond_end_sync is modified to allow to force a sync inorder to get the curr_resync_completed uptodate with the sector passed. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-08-19 01:14:42 +03:00
int (*resync_info_update)(struct mddev *mddev, sector_t lo, sector_t hi);
metadata_update sends message to other nodes - request to send a message - make changes to superblock - send messages telling everyone that the superblock has changed - other nodes all read the superblock - other nodes all ack the messages - updating node release the "I'm sending a message" resource. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-06-07 10:44:51 +04:00
int (*metadata_update_start)(struct mddev *mddev);
int (*metadata_update_finish)(struct mddev *mddev);
md-cluster: Fix adding of new disk with new reload code Adding the disk worked incorrectly with the new reload code. Fix it: - No operation should be performed on rdev marked as Candidate - After a metadata update operation, kick disk if role is 0xfffe else clear Candidate bit and continue with the regular change check. - Saving the mode of the lock resource to check if token lock is already locked, because it can be called twice while adding a disk. However, unlock_comm() must be called only once. - add_new_disk() is called by the node initiating the --add operation. If it needs to be canceled, call add_new_disk_cancel(). The operation is completed by md_update_sb() which will write and unlock the communication. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-10-01 21:20:27 +03:00
void (*metadata_update_cancel)(struct mddev *mddev);
md-cluster: Perform resync/recovery under a DLM lock Resync or recovery must be performed by only one node at a time. A DLM lock resource, resync_lockres provides the mutual exclusion so that only one node performs the recovery/resync at a time. If a node is unable to get the resync_lockres, because recovery is being performed by another node, it set MD_RECOVER_NEEDED so as to schedule recovery in the future. Remove the debug message in resync_info_update() used during development. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-09-30 21:20:35 +03:00
int (*resync_start)(struct mddev *mddev);
int (*resync_finish)(struct mddev *mddev);
Fix read-balancing during node failure During a node failure, We need to suspend read balancing so that the reads are directed to the first device and stale data is not read. Suspending writes is not required because these would be recorded and synced eventually. A new flag MD_CLUSTER_SUSPEND_READ_BALANCING is set in recover_prep(). area_resyncing() will respond true for the entire devices if this flag is set and the request type is READ. The flag is cleared in recover_done(). Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reported-By: David Teigland <teigland@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-06-24 17:30:32 +03:00
int (*area_resyncing)(struct mddev *mddev, int direction, sector_t lo, sector_t hi);
md-cluster: Fix adding of new disk with new reload code Adding the disk worked incorrectly with the new reload code. Fix it: - No operation should be performed on rdev marked as Candidate - After a metadata update operation, kick disk if role is 0xfffe else clear Candidate bit and continue with the regular change check. - Saving the mode of the lock resource to check if token lock is already locked, because it can be called twice while adding a disk. However, unlock_comm() must be called only once. - add_new_disk() is called by the node initiating the --add operation. If it needs to be canceled, call add_new_disk_cancel(). The operation is completed by md_update_sb() which will write and unlock the communication. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-10-01 21:20:27 +03:00
int (*add_new_disk)(struct mddev *mddev, struct md_rdev *rdev);
void (*add_new_disk_cancel)(struct mddev *mddev);
md: Fix stray --cluster-confirm crash A --cluster-confirm without an --add (by another node) can crash the kernel. Fix it by guarding it using a state. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-03-02 19:55:49 +03:00
int (*new_disk_ack)(struct mddev *mddev, bool ack);
md-cluster: remove capabilities This adds "remove" capabilities for the clustered environment. When a user initiates removal of a device from the array, a REMOVE message with disk number in the array is sent to all the nodes which kick the respective device in their own array. This facilitates the removal of failed devices. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-14 18:44:44 +03:00
int (*remove_disk)(struct mddev *mddev, struct md_rdev *rdev);
md-cluster: gather resync infos and enable recv_thread after bitmap is ready The in-memory bitmap is not ready when node joins cluster, so it doesn't make sense to make gather_all_resync_info() called so earlier, we need to call it after the node's bitmap is setup. Also, recv_thread could be wake up after node joins cluster, but it could cause problem if node receives RESYNCING message without persionality since mddev->pers->quiesce is called in process_suspend_info. This commit introduces a new cluster interface load_bitmaps to fix above problems, load_bitmaps is called in bitmap_load where bitmap and persionality are ready, and load_bitmaps does the following tasks: 1. call gather_all_resync_info to load all the node's bitmap info. 2. set MD_CLUSTER_ALREADY_IN_CLUSTER bit to recv_thread could be wake up, and wake up recv_thread if there is pending recv event. Then ack_bast only wakes up recv_thread after IN_CLUSTER bit is ready otherwise MD_CLUSTER_PENDING_RESYNC_EVENT is set. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-05-04 09:17:09 +03:00
void (*load_bitmaps)(struct mddev *mddev, int total_slots);
md-cluster: re-add capabilities When "re-add" is writted to /sys/block/mdXX/md/dev-YYY/state, the clustered md: 1. Sends RE_ADD message with the desc_nr. Nodes receiving the message clear the Faulty bit in their respective rdev->flags. 2. The node initiating re-add, gathers the bitmaps of all nodes and copies them into the local bitmap. It does not clear the bitmap from which it is copying. 3. Initiating node schedules a md recovery to sync the devices. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-14 18:45:42 +03:00
int (*gather_bitmaps)(struct md_rdev *rdev);
md-cluster: append some actions when change bitmap from clustered to none For clustered raid, we need to do extra actions when change bitmap to none. 1. check if all the bitmap lock could be get or not, if yes then we can continue the change since cluster raid is only active in current node. Otherwise return fail and unlock the related bitmap locks 2. set nodes to 0 and then leave cluster environment. 3. release other nodes's bitmap lock. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-12-21 02:51:00 +03:00
int (*lock_all_bitmaps)(struct mddev *mddev);
void (*unlock_all_bitmaps)(struct mddev *mddev);
Introduce md_cluster_operations to handle cluster functions This allows dynamic registering of cluster hooks. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2014-03-29 19:01:53 +04:00
};
#endif /* _MD_CLUSTER_H */
Reference in New Issue Copy Permalink