iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/net/wireless/ath/Kconfig

63 lines
2.0 KiB
Plaintext
Raw Normal View History

wireless: allow Atheros card to not depend on ath.ko There are 2 different things: - sub-menu for "Atheros Wireless cards" family - module ath.ko with common Atheros code Until now, they both used to depend on the same Kconfig variable ATH_COMMON. Thus, being "Atheros card" and "depending on ath.ko" was the same. To allow module to belong to the "Atheros Wireless cards" family but not use ath.ko, 2 conditions above need to be separated. So, this patch introduce new Kconfig variable ATH_CARDS for belonging to the "Atheros Wireless Cards" family; while ATH_COMMON becomes hidden variable to express dependency on common Atheros code in ath.ko. Modules that depend on this common code now express it by setting ATH_COMMON. Right now, ath6kl do not depend on common code and thus do not set ATH_COMMON. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-28 18:57:19 +02:00
config ATH_COMMON
tristate
menuconfig ATH_CARDS
atheros: put atheros wireless drivers into ath/ Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-30 22:30:33 -04:00
tristate "Atheros Wireless Cards"
um: a couple of missing dependencies... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2011-08-18 20:12:50 +01:00
depends on CFG80211 && (!UML || BROKEN)
ath: simplify kconfig dependency and add documentation Make atheros wireless drivers visible when you select "Atheros wirless drivers". Adds links to ath.ko page, and Atheros drivers page on the wiki. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27 16:52:07 -07:00
---help---
This will enable the support for the Atheros wireless drivers.
ath9k_htc: Support for AR9271 chipset. Features: * Station mode * IBSS mode * Monitor mode * Legacy support * HT support * TX/RX 11n Aggregation * HW encryption * LED * Suspend/Resume For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-17 14:25:25 +05:30
ath5k, ath9k, ath9k_htc and ar9170 drivers share some common code, this option
ath: add common ath_rxbuf_alloc() and make ath9k use it Turns out ath5k and ath9k can share the same helper to allocates RX skbs. We allocate skbs aligned to the cache line size. This requirement seems to have come from AR5210; when this was not done it seems sometimes we'd get bogus data. I'm also told it may have been a performance enhancement consideration. In the end I can't be sure we can remove this on new hardware so just keep this and start sharing it through ath.ko. Make ath9k start using this, ath5k is next. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-12 09:56:59 -07:00
enables the common ath.ko module which shares common helpers.
atheros: introduce ath module containing common ath5k/ath9k/ar9170 code This change creates a new module, ath.ko, which includes code that can be shared between ath5k, ath9k and ar9170. For now, extract most of the ath9k regulatory code so it can also be used in ath5k. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-30 22:30:29 -04:00
ath: simplify kconfig dependency and add documentation Make atheros wireless drivers visible when you select "Atheros wirless drivers". Adds links to ath.ko page, and Atheros drivers page on the wiki. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27 16:52:07 -07:00
For more information and documentation on this module you can visit:
http://wireless.kernel.org/en/users/Drivers/ath
For information on all Atheros wireless drivers visit:
http://wireless.kernel.org/en/users/Drivers/Atheros
wireless: allow Atheros card to not depend on ath.ko There are 2 different things: - sub-menu for "Atheros Wireless cards" family - module ath.ko with common Atheros code Until now, they both used to depend on the same Kconfig variable ATH_COMMON. Thus, being "Atheros card" and "depending on ath.ko" was the same. To allow module to belong to the "Atheros Wireless cards" family but not use ath.ko, 2 conditions above need to be separated. So, this patch introduce new Kconfig variable ATH_CARDS for belonging to the "Atheros Wireless Cards" family; while ATH_COMMON becomes hidden variable to express dependency on common Atheros code in ath.ko. Modules that depend on this common code now express it by setting ATH_COMMON. Right now, ath6kl do not depend on common code and thus do not set ATH_COMMON. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-28 18:57:19 +02:00
if ATH_CARDS
atheros: add common debug printing ath9k uses this for now, ath9k_htc is expected to re-use this as well. We lave ath5k as is, but it certainly can also be converted later. The ath9k module parameter and debugfs entry is kept. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-13 02:42:02 -07:00
config ATH_DEBUG
bool "Atheros wireless debugging"
---help---
Say Y, if you want to debug atheros wireless drivers.
Right now only ath9k makes use of this.
ath: Add support for tracing Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-27 13:27:45 +05:30
config ATH_TRACEPOINTS
bool "Atheros wireless tracing"
depends on ATH_DEBUG
depends on EVENT_TRACING
---help---
This option enables tracepoints for atheros wireless drivers.
Currently, ath9k makes use of this facility.
ath: add support for proper dynamic regulatory hints This enables support for dynamic user regulatory hints. This is enabled only when CFG80211_CERTIFICATION_ONUS is selected. For US and JP this is explicitly disabled unless the systems are being used for strict controlled testing. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14 17:42:09 -07:00
config ATH_REG_DYNAMIC_USER_REG_HINTS
bool "Atheros dynamic user regulatory hints"
depends on CFG80211_CERTIFICATION_ONUS
default n
---help---
Say N. This should only be enabled in countries where
this feature is explicitly allowed and only on cards that
specifically have been tested for this.
config ATH_REG_DYNAMIC_USER_CERT_TESTING
bool "Atheros dynamic user regulatory testing"
depends on ATH_REG_DYNAMIC_USER_REG_HINTS && CFG80211_CERTIFICATION_ONUS
default n
---help---
Say N. This should only be enabled on systems
undergoing certification testing.
atheros: put atheros wireless drivers into ath/ Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-30 22:30:33 -04:00
source "drivers/net/wireless/ath/ath5k/Kconfig"
source "drivers/net/wireless/ath/ath9k/Kconfig"
carl9170: Makefile, Kconfig files and MAINTAINERS Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-06 01:10:25 +02:00
source "drivers/net/wireless/ath/carl9170/Kconfig"
Add ath6kl cleaned up driver Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-07-18 00:22:30 +03:00
source "drivers/net/wireless/ath/ath6kl/Kconfig"
ar5523: Add new driver This driver is for the AR5523 chipset from Atheros. It was created in 2007 by Christoph Hellwig but it was never finished. I found it a couple of months ago and after some polishing it's working pretty fine. The driver was written with the FreeBSD driver (uath) as reference, which was written with the reverse-engineered windows driver as reference, hence the feature set is very limited. Station mode only, no HW crypto offload. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-23 20:33:57 +02:00
source "drivers/net/wireless/ath/ar5523/Kconfig"
wireless: add new wil6210 802.11ad 60GHz driver This adds support for the 60 GHz 802.11ad Wilocity card through a new driver, wil6210. Wilocity implemented the firmware, QCA maintains the device driver. Currently supported: - STA: with security - AP: limited to 1 connected STA, security disabled - Monitor: due to a hardware/firmware limitation either control or non-control frames are monitored Using a STA and AP with this drive, one can assemble a fully functional BSS. Throughput of 1.2Gbps is achieved with iperf. The wil6210 cards have on-board flash memory for the firmware, the cards comes pre-flashed and no firmware download is required. For more details see: http://wireless.kernel.org/en/users/Drivers/wil6210 Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-20 13:13:19 -08:00
source "drivers/net/wireless/ath/wil6210/Kconfig"
ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices Here's a new mac80211 driver for Qualcomm Atheros 802.11ac QCA98xx devices. A major difference from ath9k is that there's now a firmware and that's why we had to implement a new driver. The wiki page for the driver is: http://wireless.kernel.org/en/users/Drivers/ath10k The driver has had many authors, they are listed here alphabetically: Bartosz Markowski <bartosz.markowski@tieto.com> Janusz Dziedzic <janusz.dziedzic@tieto.com> Kalle Valo <kvalo@qca.qualcomm.com> Marek Kwaczynski <marek.kwaczynski@tieto.com> Marek Puzyniak <marek.puzyniak@tieto.com> Michal Kazior <michal.kazior@tieto.com> Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-06-12 20:52:10 +03:00
source "drivers/net/wireless/ath/ath10k/Kconfig"
wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware This is a mac80211 driver for Qualcomm WCN3660/WCN3680 devices. So far WCN3660/WCN3680 is available only on MSM platform. Firmware can be found here: https://www.codeaurora.org/cgit/external/hisense/platform/vendor/qcom-opensource/wlan/prima/tree/firmware_bin?h=8130_CS Wiki page is available here: http://wireless.kernel.org/en/users/Drivers/wcn36xx A lot people made a contribution to this driver. Here is the list in alphabetical order: Eugene Krasnikov <k.eugene.e@gmail.com> Kalle Valo <kvalo@qca.qualcomm.com> Olof Johansson <dev@skyshaper.net> Pontus Fuchs <pontus.fuchs@gmail.com> Yanbo Li <yanbol@qti.qualcomm.com> Signed-off-by: Eugene Krasnikov <k.eugene.e@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-08 21:25:58 +01:00
source "drivers/net/wireless/ath/wcn36xx/Kconfig"
atheros: add common debug printing ath9k uses this for now, ath9k_htc is expected to re-use this as well. We lave ath5k as is, but it certainly can also be converted later. The ath9k module parameter and debugfs entry is kept. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-13 02:42:02 -07:00
ath: simplify kconfig dependency and add documentation Make atheros wireless drivers visible when you select "Atheros wirless drivers". Adds links to ath.ko page, and Atheros drivers page on the wiki. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27 16:52:07 -07:00
endif
Reference in New Issue Copy Permalink