2009-04-20 17:00:56 +04:00
/*
2009-06-03 01:37:05 +04:00
* builtin - top . c
*
* Builtin top command : Display a continuously updated profile of
* any workload , CPU or specific PID .
*
* Copyright ( C ) 2008 , Red Hat Inc , Ingo Molnar < mingo @ redhat . com >
*
* Improvements and fixes by :
*
* Arjan van de Ven < arjan @ linux . intel . com >
* Yanmin Zhang < yanmin . zhang @ intel . com >
* Wu Fengguang < fengguang . wu @ intel . com >
* Mike Galbraith < efault @ gmx . de >
* Paul Mackerras < paulus @ samba . org >
*
* Released under the GPL v2 . ( and only v2 , not any later version )
2009-04-20 17:00:56 +04:00
*/
2009-06-03 01:37:05 +04:00
# include "builtin.h"
2009-04-20 17:00:56 +04:00
2009-05-23 20:28:58 +04:00
# include "perf.h"
2009-06-03 01:37:05 +04:00
2009-06-04 17:19:47 +04:00
# include "util/color.h"
2009-12-14 00:50:28 +03:00
# include "util/session.h"
# include "util/symbol.h"
2009-10-02 10:29:58 +04:00
# include "util/thread.h"
2009-04-27 10:02:14 +04:00
# include "util/util.h"
2009-07-01 19:28:37 +04:00
# include <linux/rbtree.h>
2009-05-26 11:17:18 +04:00
# include "util/parse-options.h"
# include "util/parse-events.h"
perf tools: Fix sparse CPU numbering related bugs
At present, the perf subcommands that do system-wide monitoring
(perf stat, perf record and perf top) don't work properly unless
the online cpus are numbered 0, 1, ..., N-1. These tools ask
for the number of online cpus with sysconf(_SC_NPROCESSORS_ONLN)
and then try to create events for cpus 0, 1, ..., N-1.
This creates problems for systems where the online cpus are
numbered sparsely. For example, a POWER6 system in
single-threaded mode (i.e. only running 1 hardware thread per
core) will have only even-numbered cpus online.
This fixes the problem by reading the /sys/devices/system/cpu/online
file to find out which cpus are online. The code that does that is in
tools/perf/util/cpumap.[ch], and consists of a read_cpu_map()
function that sets up a cpumap[] array and returns the number of
online cpus. If /sys/devices/system/cpu/online can't be read or
can't be parsed successfully, it falls back to using sysconf to
ask how many cpus are online and sets up an identity map in cpumap[].
The perf record, perf stat and perf top code then calls
read_cpu_map() in the system-wide monitoring case (instead of
sysconf) and uses cpumap[] to get the cpu numbers to pass to
perf_event_open.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <20100310093609.GA3959@brick.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10 12:36:09 +03:00
# include "util/cpumap.h"
2009-04-20 17:00:56 +04:00
2009-08-17 00:05:48 +04:00
# include "util/debug.h"
2009-04-20 17:00:56 +04:00
# include <assert.h>
# include <fcntl.h>
2009-05-26 11:17:18 +04:00
2009-04-20 17:00:56 +04:00
# include <stdio.h>
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
# include <termios.h>
# include <unistd.h>
2009-05-26 11:17:18 +04:00
2009-04-20 17:00:56 +04:00
# include <errno.h>
# include <time.h>
# include <sched.h>
# include <pthread.h>
# include <sys/syscall.h>
# include <sys/ioctl.h>
# include <sys/poll.h>
# include <sys/prctl.h>
# include <sys/wait.h>
# include <sys/uio.h>
# include <sys/mman.h>
# include <linux/unistd.h>
# include <linux/types.h>
2009-06-06 11:58:57 +04:00
static int fd [ MAX_NR_CPUS ] [ MAX_COUNTERS ] ;
2009-04-20 17:00:56 +04:00
2009-10-06 17:14:21 +04:00
static int system_wide = 0 ;
2009-04-20 17:00:56 +04:00
2009-10-12 09:56:03 +04:00
static int default_interval = 0 ;
2009-04-20 17:00:56 +04:00
2009-10-06 17:14:21 +04:00
static int count_filter = 5 ;
2009-11-17 00:30:27 +03:00
static int print_entries ;
2009-04-20 17:00:56 +04:00
2009-10-06 17:14:21 +04:00
static int target_pid = - 1 ;
static int inherit = 0 ;
static int profile_cpu = - 1 ;
static int nr_cpus = 0 ;
static unsigned int realtime_prio = 0 ;
static int group = 0 ;
2009-04-20 17:00:56 +04:00
static unsigned int page_size ;
2009-10-06 17:14:21 +04:00
static unsigned int mmap_pages = 16 ;
static int freq = 1000 ; /* 1 KHz */
2009-04-20 17:00:56 +04:00
2009-10-06 17:14:21 +04:00
static int delay_secs = 2 ;
static int zero = 0 ;
static int dump_symtab = 0 ;
2009-04-20 17:00:56 +04:00
2009-11-17 02:45:24 +03:00
static bool hide_kernel_symbols = false ;
static bool hide_user_symbols = false ;
2009-11-17 20:40:54 +03:00
static struct winsize winsize ;
2009-11-17 02:45:24 +03:00
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
/*
* Source
*/
struct source_line {
u64 eip ;
unsigned long count [ MAX_COUNTERS ] ;
char * line ;
struct source_line * next ;
} ;
2009-10-06 17:14:21 +04:00
static char * sym_filter = NULL ;
struct sym_entry * sym_filter_entry = NULL ;
2010-02-03 21:52:08 +03:00
struct sym_entry * sym_filter_entry_sched = NULL ;
2009-10-06 17:14:21 +04:00
static int sym_pcnt_filter = 5 ;
static int sym_counter = 0 ;
static int display_weighted = - 1 ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
2009-04-20 17:00:56 +04:00
/*
* Symbols
*/
2009-11-17 23:38:02 +03:00
struct sym_entry_source {
struct source_line * source ;
struct source_line * lines ;
struct source_line * * lines_tail ;
pthread_mutex_t lock ;
} ;
2009-04-20 17:00:56 +04:00
struct sym_entry {
2009-05-28 21:55:41 +04:00
struct rb_node rb_node ;
struct list_head node ;
2009-05-30 00:03:07 +04:00
unsigned long snap_count ;
double weight ;
2009-04-20 17:00:56 +04:00
int skip ;
2009-11-17 20:40:54 +03:00
u16 name_len ;
2009-11-17 02:45:24 +03:00
u8 origin ;
2009-10-02 10:29:58 +04:00
struct map * map ;
2009-11-17 23:38:02 +03:00
struct sym_entry_source * src ;
2009-11-17 23:38:01 +03:00
unsigned long count [ 0 ] ;
2009-04-20 17:00:56 +04:00
} ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
/*
* Source functions
*/
2009-11-17 23:38:00 +03:00
static inline struct symbol * sym_entry__symbol ( struct sym_entry * self )
{
2009-11-24 17:05:15 +03:00
return ( ( void * ) self ) + symbol_conf . priv_size ;
2009-11-17 23:38:00 +03:00
}
2010-03-12 02:12:41 +03:00
void get_term_dimensions ( struct winsize * ws )
2009-11-17 00:30:27 +03:00
{
2009-11-17 20:40:54 +03:00
char * s = getenv ( " LINES " ) ;
if ( s ! = NULL ) {
ws - > ws_row = atoi ( s ) ;
s = getenv ( " COLUMNS " ) ;
if ( s ! = NULL ) {
ws - > ws_col = atoi ( s ) ;
if ( ws - > ws_row & & ws - > ws_col )
return ;
}
2009-11-17 00:30:27 +03:00
}
2009-11-17 20:40:54 +03:00
# ifdef TIOCGWINSZ
if ( ioctl ( 1 , TIOCGWINSZ , ws ) = = 0 & &
ws - > ws_row & & ws - > ws_col )
return ;
2009-11-17 00:30:27 +03:00
# endif
2009-11-17 20:40:54 +03:00
ws - > ws_row = 25 ;
ws - > ws_col = 80 ;
2009-11-17 00:30:27 +03:00
}
2009-11-17 20:40:54 +03:00
static void update_print_entries ( struct winsize * ws )
2009-11-17 00:30:27 +03:00
{
2009-11-17 20:40:54 +03:00
print_entries = ws - > ws_row ;
2009-11-17 00:30:27 +03:00
if ( print_entries > 9 )
print_entries - = 9 ;
}
static void sig_winch_handler ( int sig __used )
{
2009-11-17 20:40:54 +03:00
get_term_dimensions ( & winsize ) ;
update_print_entries ( & winsize ) ;
2009-11-17 00:30:27 +03:00
}
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
static void parse_source ( struct sym_entry * syme )
{
struct symbol * sym ;
2009-11-17 23:38:02 +03:00
struct sym_entry_source * source ;
2009-10-02 10:29:58 +04:00
struct map * map ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
FILE * file ;
2009-08-15 14:26:57 +04:00
char command [ PATH_MAX * 2 ] ;
2009-10-02 10:29:58 +04:00
const char * path ;
u64 len ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
if ( ! syme )
return ;
2009-11-17 23:38:02 +03:00
if ( syme - > src = = NULL ) {
2009-11-24 17:05:16 +03:00
syme - > src = zalloc ( sizeof ( * source ) ) ;
2009-11-17 23:38:02 +03:00
if ( syme - > src = = NULL )
return ;
pthread_mutex_init ( & syme - > src - > lock , NULL ) ;
}
source = syme - > src ;
if ( source - > lines ) {
pthread_mutex_lock ( & source - > lock ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
goto out_assign ;
}
2009-11-17 23:38:00 +03:00
sym = sym_entry__symbol ( syme ) ;
2009-10-02 10:29:58 +04:00
map = syme - > map ;
path = map - > dso - > long_name ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
len = sym - > end - sym - > start ;
2009-10-02 10:29:58 +04:00
sprintf ( command ,
2010-02-07 16:46:16 +03:00
" objdump --start-address=%#0*Lx --stop-address=%#0*Lx -dS %s " ,
BITS_PER_LONG / 4 , map__rip_2objdump ( map , sym - > start ) ,
BITS_PER_LONG / 4 , map__rip_2objdump ( map , sym - > end ) , path ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
file = popen ( command , " r " ) ;
if ( ! file )
return ;
2009-11-17 23:38:02 +03:00
pthread_mutex_lock ( & source - > lock ) ;
source - > lines_tail = & source - > lines ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
while ( ! feof ( file ) ) {
struct source_line * src ;
size_t dummy = 0 ;
perf top: Fix annotate for userspace
First, for programs and prelinked libraries, annotate code was
fooled by objdump output IPs (src->eip in the code) being
wrongly converted to absolute IPs. In such case there were no
conversion needed, but in
src->eip = strtoull(src->line, NULL, 16);
src->eip = map->unmap_ip(map, src->eip); // = eip + map->start - map->pgoff
we were reading absolute address from objdump (e.g. 8048604) and
then almost doubling it, because eip & map->start are
approximately close for small programs.
Needless to say, that later, in record_precise_ip() there was no
matching with real runtime IPs.
And second, like with `perf annotate` the problem with
non-prelinked *.so was that we were doing rip -> objdump address
conversion wrong.
Also, because unlike `perf annotate`, `perf top` code does
annotation based on absolute IPs for performance reasons(*), new
helper for mapping objdump addresse to IP is introduced.
(*) we get samples info in absolute IPs, and since we do lots of
hit-testing on absolute IPs at runtime in record_precise_ip(), it's
better to convert objdump addresses to IPs once and do no conversion
at runtime.
I also had to fix how objdump output is parsed (with hardcoded
8/16 characters format, which was inappropriate for ET_DYN dsos
with small addresses like '4ac')
Also note, that not all objdump output lines has associtated
IPs, e.g. look at source lines here:
000004ac <my_strlen>:
extern "C"
int my_strlen(const char *s)
4ac: 55 push %ebp
4ad: 89 e5 mov %esp,%ebp
4af: 83 ec 10 sub $0x10,%esp
{
int len = 0;
4b2: c7 45 fc 00 00 00 00 movl $0x0,-0x4(%ebp)
4b9: eb 08 jmp 4c3 <my_strlen+0x17>
while (*s) {
++len;
4bb: 83 45 fc 01 addl $0x1,-0x4(%ebp)
++s;
4bf: 83 45 08 01 addl $0x1,0x8(%ebp)
So we mark them with eip=0, and ignore such lines in annotate
lookup code.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
[ Note: one hunk of this patch was applied by Mike in 57d8188 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1265550376-12665-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-07 16:46:15 +03:00
char * c , * sep ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
src = malloc ( sizeof ( struct source_line ) ) ;
assert ( src ! = NULL ) ;
memset ( src , 0 , sizeof ( struct source_line ) ) ;
if ( getline ( & src - > line , & dummy , file ) < 0 )
break ;
if ( ! src - > line )
break ;
c = strchr ( src - > line , ' \n ' ) ;
if ( c )
* c = 0 ;
src - > next = NULL ;
2009-11-17 23:38:02 +03:00
* source - > lines_tail = src ;
source - > lines_tail = & src - > next ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
perf top: Fix annotate for userspace
First, for programs and prelinked libraries, annotate code was
fooled by objdump output IPs (src->eip in the code) being
wrongly converted to absolute IPs. In such case there were no
conversion needed, but in
src->eip = strtoull(src->line, NULL, 16);
src->eip = map->unmap_ip(map, src->eip); // = eip + map->start - map->pgoff
we were reading absolute address from objdump (e.g. 8048604) and
then almost doubling it, because eip & map->start are
approximately close for small programs.
Needless to say, that later, in record_precise_ip() there was no
matching with real runtime IPs.
And second, like with `perf annotate` the problem with
non-prelinked *.so was that we were doing rip -> objdump address
conversion wrong.
Also, because unlike `perf annotate`, `perf top` code does
annotation based on absolute IPs for performance reasons(*), new
helper for mapping objdump addresse to IP is introduced.
(*) we get samples info in absolute IPs, and since we do lots of
hit-testing on absolute IPs at runtime in record_precise_ip(), it's
better to convert objdump addresses to IPs once and do no conversion
at runtime.
I also had to fix how objdump output is parsed (with hardcoded
8/16 characters format, which was inappropriate for ET_DYN dsos
with small addresses like '4ac')
Also note, that not all objdump output lines has associtated
IPs, e.g. look at source lines here:
000004ac <my_strlen>:
extern "C"
int my_strlen(const char *s)
4ac: 55 push %ebp
4ad: 89 e5 mov %esp,%ebp
4af: 83 ec 10 sub $0x10,%esp
{
int len = 0;
4b2: c7 45 fc 00 00 00 00 movl $0x0,-0x4(%ebp)
4b9: eb 08 jmp 4c3 <my_strlen+0x17>
while (*s) {
++len;
4bb: 83 45 fc 01 addl $0x1,-0x4(%ebp)
++s;
4bf: 83 45 08 01 addl $0x1,0x8(%ebp)
So we mark them with eip=0, and ignore such lines in annotate
lookup code.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
[ Note: one hunk of this patch was applied by Mike in 57d8188 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1265550376-12665-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-07 16:46:15 +03:00
src - > eip = strtoull ( src - > line , & sep , 16 ) ;
if ( * sep = = ' : ' )
src - > eip = map__objdump_2ip ( map , src - > eip ) ;
else /* this line has no ip info (e.g. source line) */
src - > eip = 0 ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
}
pclose ( file ) ;
out_assign :
sym_filter_entry = syme ;
2009-11-17 23:38:02 +03:00
pthread_mutex_unlock ( & source - > lock ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
}
static void __zero_source_counters ( struct sym_entry * syme )
{
int i ;
struct source_line * line ;
2009-11-17 23:38:02 +03:00
line = syme - > src - > lines ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
while ( line ) {
for ( i = 0 ; i < nr_counters ; i + + )
line - > count [ i ] = 0 ;
line = line - > next ;
}
}
static void record_precise_ip ( struct sym_entry * syme , int counter , u64 ip )
{
struct source_line * line ;
if ( syme ! = sym_filter_entry )
return ;
2009-11-17 23:38:02 +03:00
if ( pthread_mutex_trylock ( & syme - > src - > lock ) )
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
return ;
2009-11-17 23:38:02 +03:00
if ( syme - > src = = NULL | | syme - > src - > source = = NULL )
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
goto out_unlock ;
2009-11-17 23:38:02 +03:00
for ( line = syme - > src - > lines ; line ; line = line - > next ) {
perf top: Fix annotate for userspace
First, for programs and prelinked libraries, annotate code was
fooled by objdump output IPs (src->eip in the code) being
wrongly converted to absolute IPs. In such case there were no
conversion needed, but in
src->eip = strtoull(src->line, NULL, 16);
src->eip = map->unmap_ip(map, src->eip); // = eip + map->start - map->pgoff
we were reading absolute address from objdump (e.g. 8048604) and
then almost doubling it, because eip & map->start are
approximately close for small programs.
Needless to say, that later, in record_precise_ip() there was no
matching with real runtime IPs.
And second, like with `perf annotate` the problem with
non-prelinked *.so was that we were doing rip -> objdump address
conversion wrong.
Also, because unlike `perf annotate`, `perf top` code does
annotation based on absolute IPs for performance reasons(*), new
helper for mapping objdump addresse to IP is introduced.
(*) we get samples info in absolute IPs, and since we do lots of
hit-testing on absolute IPs at runtime in record_precise_ip(), it's
better to convert objdump addresses to IPs once and do no conversion
at runtime.
I also had to fix how objdump output is parsed (with hardcoded
8/16 characters format, which was inappropriate for ET_DYN dsos
with small addresses like '4ac')
Also note, that not all objdump output lines has associtated
IPs, e.g. look at source lines here:
000004ac <my_strlen>:
extern "C"
int my_strlen(const char *s)
4ac: 55 push %ebp
4ad: 89 e5 mov %esp,%ebp
4af: 83 ec 10 sub $0x10,%esp
{
int len = 0;
4b2: c7 45 fc 00 00 00 00 movl $0x0,-0x4(%ebp)
4b9: eb 08 jmp 4c3 <my_strlen+0x17>
while (*s) {
++len;
4bb: 83 45 fc 01 addl $0x1,-0x4(%ebp)
++s;
4bf: 83 45 08 01 addl $0x1,0x8(%ebp)
So we mark them with eip=0, and ignore such lines in annotate
lookup code.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
[ Note: one hunk of this patch was applied by Mike in 57d8188 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1265550376-12665-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-07 16:46:15 +03:00
/* skip lines without IP info */
if ( line - > eip = = 0 )
continue ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
if ( line - > eip = = ip ) {
line - > count [ counter ] + + ;
break ;
}
if ( line - > eip > ip )
break ;
}
out_unlock :
2009-11-17 23:38:02 +03:00
pthread_mutex_unlock ( & syme - > src - > lock ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
}
2010-02-22 22:14:22 +03:00
# define PATTERN_LEN (BITS_PER_LONG / 4 + 2)
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
static void lookup_sym_source ( struct sym_entry * syme )
{
2009-11-17 23:38:00 +03:00
struct symbol * symbol = sym_entry__symbol ( syme ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
struct source_line * line ;
2010-02-22 22:14:22 +03:00
char pattern [ PATTERN_LEN + 1 ] ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
2010-02-07 16:46:16 +03:00
sprintf ( pattern , " %0*Lx < " , BITS_PER_LONG / 4 ,
map__rip_2objdump ( syme - > map , symbol - > start ) ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
2009-11-17 23:38:02 +03:00
pthread_mutex_lock ( & syme - > src - > lock ) ;
for ( line = syme - > src - > lines ; line ; line = line - > next ) {
2010-02-22 22:14:22 +03:00
if ( memcmp ( line - > line , pattern , PATTERN_LEN ) = = 0 ) {
2009-11-17 23:38:02 +03:00
syme - > src - > source = line ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
break ;
}
}
2009-11-17 23:38:02 +03:00
pthread_mutex_unlock ( & syme - > src - > lock ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
}
static void show_lines ( struct source_line * queue , int count , int total )
{
int i ;
struct source_line * line ;
line = queue ;
for ( i = 0 ; i < count ; i + + ) {
float pcnt = 100.0 * ( float ) line - > count [ sym_counter ] / ( float ) total ;
printf ( " %8li %4.1f%% \t %s \n " , line - > count [ sym_counter ] , pcnt , line - > line ) ;
line = line - > next ;
}
}
# define TRACE_COUNT 3
static void show_details ( struct sym_entry * syme )
{
struct symbol * symbol ;
struct source_line * line ;
struct source_line * line_queue = NULL ;
int displayed = 0 ;
int line_queue_count = 0 , total = 0 , more = 0 ;
if ( ! syme )
return ;
2009-11-17 23:38:02 +03:00
if ( ! syme - > src - > source )
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
lookup_sym_source ( syme ) ;
2009-11-17 23:38:02 +03:00
if ( ! syme - > src - > source )
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
return ;
2009-11-17 23:38:00 +03:00
symbol = sym_entry__symbol ( syme ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
printf ( " Showing %s for %s \n " , event_name ( sym_counter ) , symbol - > name ) ;
printf ( " Events Pcnt (>=%d%%) \n " , sym_pcnt_filter ) ;
2009-11-17 23:38:02 +03:00
pthread_mutex_lock ( & syme - > src - > lock ) ;
line = syme - > src - > source ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
while ( line ) {
total + = line - > count [ sym_counter ] ;
line = line - > next ;
}
2009-11-17 23:38:02 +03:00
line = syme - > src - > source ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
while ( line ) {
float pcnt = 0.0 ;
if ( ! line_queue_count )
line_queue = line ;
line_queue_count + + ;
if ( line - > count [ sym_counter ] )
pcnt = 100.0 * line - > count [ sym_counter ] / ( float ) total ;
if ( pcnt > = ( float ) sym_pcnt_filter ) {
if ( displayed < = print_entries )
show_lines ( line_queue , line_queue_count , total ) ;
else more + + ;
displayed + = line_queue_count ;
line_queue_count = 0 ;
line_queue = NULL ;
} else if ( line_queue_count > TRACE_COUNT ) {
line_queue = line_queue - > next ;
line_queue_count - - ;
}
line - > count [ sym_counter ] = zero ? 0 : line - > count [ sym_counter ] * 7 / 8 ;
line = line - > next ;
}
2009-11-17 23:38:02 +03:00
pthread_mutex_unlock ( & syme - > src - > lock ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
if ( more )
printf ( " %d lines not displayed, maybe increase display entries [e] \n " , more ) ;
}
2009-04-20 17:00:56 +04:00
2009-05-28 21:55:41 +04:00
/*
2009-10-27 00:23:19 +03:00
* Symbols will be added here in event__process_sample and will get out
2009-05-28 21:55:41 +04:00
* after decayed .
*/
static LIST_HEAD ( active_symbols ) ;
2009-05-30 00:03:07 +04:00
static pthread_mutex_t active_symbols_lock = PTHREAD_MUTEX_INITIALIZER ;
2009-04-20 17:00:56 +04:00
/*
* Ordering weight : count - 1 * count - 2 * . . . / count - n
*/
static double sym_weight ( const struct sym_entry * sym )
{
2009-05-30 00:03:07 +04:00
double weight = sym - > snap_count ;
2009-04-20 17:00:56 +04:00
int counter ;
2009-07-24 12:09:50 +04:00
if ( ! display_weighted )
return weight ;
2009-04-20 17:00:56 +04:00
for ( counter = 1 ; counter < nr_counters - 1 ; counter + + )
weight * = sym - > count [ counter ] ;
weight / = ( sym - > count [ counter ] + 1 ) ;
return weight ;
}
2009-06-05 16:29:10 +04:00
static long samples ;
static long userspace_samples ;
2010-03-04 16:19:36 +03:00
static long exact_samples ;
2009-04-20 17:00:56 +04:00
static const char CONSOLE_CLEAR [ ] = " [H [2J" ;
2009-05-30 00:03:07 +04:00
static void __list_insert_active_sym ( struct sym_entry * syme )
2009-05-28 21:55:41 +04:00
{
list_add ( & syme - > node , & active_symbols ) ;
}
2009-05-30 00:03:07 +04:00
static void list_remove_active_sym ( struct sym_entry * syme )
{
pthread_mutex_lock ( & active_symbols_lock ) ;
list_del_init ( & syme - > node ) ;
pthread_mutex_unlock ( & active_symbols_lock ) ;
}
2009-05-28 21:55:41 +04:00
static void rb_insert_active_sym ( struct rb_root * tree , struct sym_entry * se )
{
struct rb_node * * p = & tree - > rb_node ;
struct rb_node * parent = NULL ;
struct sym_entry * iter ;
while ( * p ! = NULL ) {
parent = * p ;
iter = rb_entry ( parent , struct sym_entry , rb_node ) ;
2009-05-30 00:03:07 +04:00
if ( se - > weight > iter - > weight )
2009-05-28 21:55:41 +04:00
p = & ( * p ) - > rb_left ;
else
p = & ( * p ) - > rb_right ;
}
rb_link_node ( & se - > rb_node , parent , p ) ;
rb_insert_color ( & se - > rb_node , tree ) ;
}
2009-04-20 17:00:56 +04:00
static void print_sym_table ( void )
{
2009-06-03 23:48:40 +04:00
int printed = 0 , j ;
2009-07-24 12:09:50 +04:00
int counter , snap = ! display_weighted ? sym_counter : 0 ;
2009-06-05 16:29:10 +04:00
float samples_per_sec = samples / delay_secs ;
float ksamples_per_sec = ( samples - userspace_samples ) / delay_secs ;
2010-03-04 16:19:36 +03:00
float esamples_percent = ( 100.0 * exact_samples ) / samples ;
2009-06-05 16:29:10 +04:00
float sum_ksamples = 0.0 ;
2009-05-28 21:55:41 +04:00
struct sym_entry * syme , * n ;
struct rb_root tmp = RB_ROOT ;
struct rb_node * nd ;
2009-11-24 17:05:14 +03:00
int sym_width = 0 , dso_width = 0 , max_dso_width ;
2009-11-17 20:40:54 +03:00
const int win_width = winsize . ws_col - 1 ;
2009-04-20 17:00:56 +04:00
2010-03-04 16:19:36 +03:00
samples = userspace_samples = exact_samples = 0 ;
2009-04-20 17:00:56 +04:00
2009-05-28 21:55:41 +04:00
/* Sort the active symbols */
2009-05-30 00:03:07 +04:00
pthread_mutex_lock ( & active_symbols_lock ) ;
syme = list_entry ( active_symbols . next , struct sym_entry , node ) ;
pthread_mutex_unlock ( & active_symbols_lock ) ;
list_for_each_entry_safe_from ( syme , n , & active_symbols , node ) {
2009-07-24 12:09:50 +04:00
syme - > snap_count = syme - > count [ snap ] ;
2009-05-30 00:03:07 +04:00
if ( syme - > snap_count ! = 0 ) {
2009-11-17 20:40:54 +03:00
2009-11-17 02:45:24 +03:00
if ( ( hide_user_symbols & &
syme - > origin = = PERF_RECORD_MISC_USER ) | |
( hide_kernel_symbols & &
syme - > origin = = PERF_RECORD_MISC_KERNEL ) ) {
list_remove_active_sym ( syme ) ;
continue ;
}
2009-05-30 00:03:07 +04:00
syme - > weight = sym_weight ( syme ) ;
2009-05-28 21:55:41 +04:00
rb_insert_active_sym ( & tmp , syme ) ;
2009-06-05 16:29:10 +04:00
sum_ksamples + = syme - > snap_count ;
perf top: Reduce display overhead
Iterate over the symbol table once per display interval, and
copy/sort/tally/decay only those symbols which are active.
Before:
top - 10:14:53 up 4:08, 17 users, load average: 1.17, 1.53, 1.49
Tasks: 273 total, 5 running, 268 sleeping, 0 stopped, 0 zombie
Cpu(s): 6.9%us, 38.2%sy, 0.0%ni, 19.9%id, 0.0%wa, 0.0%hi, 35.0%si, 0.0%st
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND
28504 root 20 0 1044 260 164 S 58 0.0 0:04.19 2 netserver
28499 root 20 0 1040 412 316 R 51 0.0 0:04.15 0 netperf
28500 root 20 0 1040 408 316 R 50 0.0 0:04.14 1 netperf
28503 root 20 0 1044 260 164 S 50 0.0 0:04.01 1 netserver
28501 root 20 0 1044 260 164 S 49 0.0 0:03.99 0 netserver
28502 root 20 0 1040 412 316 S 43 0.0 0:03.96 2 netperf
28468 root 20 0 1892m 325m 972 S 16 10.8 0:10.50 3 perf
28467 root 20 0 1892m 325m 972 R 2 10.8 0:00.72 3 perf
After:
top - 10:16:30 up 4:10, 17 users, load average: 2.27, 1.88, 1.62
Tasks: 273 total, 6 running, 267 sleeping, 0 stopped, 0 zombie
Cpu(s): 2.5%us, 39.7%sy, 0.0%ni, 24.6%id, 0.0%wa, 0.0%hi, 33.3%si, 0.0%st
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND
28590 root 20 0 1040 412 316 S 54 0.0 0:07.85 2 netperf
28589 root 20 0 1044 260 164 R 54 0.0 0:07.84 0 netserver
28588 root 20 0 1040 412 316 R 50 0.0 0:07.89 1 netperf
28591 root 20 0 1044 256 164 S 50 0.0 0:07.82 1 netserver
28587 root 20 0 1040 408 316 R 47 0.0 0:07.61 0 netperf
28592 root 20 0 1044 260 164 R 47 0.0 0:07.85 2 netserver
28378 root 20 0 8732 1300 860 R 2 0.0 0:01.81 3 top
28577 root 20 0 1892m 165m 972 R 2 5.5 0:00.48 3 perf
28578 root 20 0 1892m 165m 972 S 2 5.5 0:00.04 3 perf
[ Impact: optimization ]
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 11:57:56 +04:00
for ( j = 0 ; j < nr_counters ; j + + )
2009-05-28 21:55:41 +04:00
syme - > count [ j ] = zero ? 0 : syme - > count [ j ] * 7 / 8 ;
} else
2009-05-30 00:03:07 +04:00
list_remove_active_sym ( syme ) ;
perf top: Reduce display overhead
Iterate over the symbol table once per display interval, and
copy/sort/tally/decay only those symbols which are active.
Before:
top - 10:14:53 up 4:08, 17 users, load average: 1.17, 1.53, 1.49
Tasks: 273 total, 5 running, 268 sleeping, 0 stopped, 0 zombie
Cpu(s): 6.9%us, 38.2%sy, 0.0%ni, 19.9%id, 0.0%wa, 0.0%hi, 35.0%si, 0.0%st
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND
28504 root 20 0 1044 260 164 S 58 0.0 0:04.19 2 netserver
28499 root 20 0 1040 412 316 R 51 0.0 0:04.15 0 netperf
28500 root 20 0 1040 408 316 R 50 0.0 0:04.14 1 netperf
28503 root 20 0 1044 260 164 S 50 0.0 0:04.01 1 netserver
28501 root 20 0 1044 260 164 S 49 0.0 0:03.99 0 netserver
28502 root 20 0 1040 412 316 S 43 0.0 0:03.96 2 netperf
28468 root 20 0 1892m 325m 972 S 16 10.8 0:10.50 3 perf
28467 root 20 0 1892m 325m 972 R 2 10.8 0:00.72 3 perf
After:
top - 10:16:30 up 4:10, 17 users, load average: 2.27, 1.88, 1.62
Tasks: 273 total, 6 running, 267 sleeping, 0 stopped, 0 zombie
Cpu(s): 2.5%us, 39.7%sy, 0.0%ni, 24.6%id, 0.0%wa, 0.0%hi, 33.3%si, 0.0%st
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND
28590 root 20 0 1040 412 316 S 54 0.0 0:07.85 2 netperf
28589 root 20 0 1044 260 164 R 54 0.0 0:07.84 0 netserver
28588 root 20 0 1040 412 316 R 50 0.0 0:07.89 1 netperf
28591 root 20 0 1044 256 164 S 50 0.0 0:07.82 1 netserver
28587 root 20 0 1040 408 316 R 47 0.0 0:07.61 0 netperf
28592 root 20 0 1044 260 164 R 47 0.0 0:07.85 2 netserver
28378 root 20 0 8732 1300 860 R 2 0.0 0:01.81 3 top
28577 root 20 0 1892m 165m 972 R 2 5.5 0:00.48 3 perf
28578 root 20 0 1892m 165m 972 S 2 5.5 0:00.04 3 perf
[ Impact: optimization ]
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 11:57:56 +04:00
}
2009-06-04 22:48:04 +04:00
puts ( CONSOLE_CLEAR ) ;
2009-04-20 17:00:56 +04:00
2009-11-17 20:40:54 +03:00
printf ( " %-*.*s \n " , win_width , win_width , graph_dotted_line ) ;
2010-03-04 16:19:36 +03:00
printf ( " PerfTop:%8.0f irqs/sec kernel:%4.1f%% exact: %4.1f%% [ " ,
2009-06-05 16:29:10 +04:00
samples_per_sec ,
2010-03-04 16:19:36 +03:00
100.0 - ( 100.0 * ( ( samples_per_sec - ksamples_per_sec ) / samples_per_sec ) ) ,
esamples_percent ) ;
2009-04-20 17:00:56 +04:00
2009-07-24 12:09:50 +04:00
if ( nr_counters = = 1 | | ! display_weighted ) {
perf_counter tools: Define and use our own u64, s64 etc. definitions
On 64-bit powerpc, __u64 is defined to be unsigned long rather than
unsigned long long. This causes compiler warnings every time we
print a __u64 value with %Lx.
Rather than changing __u64, we define our own u64 to be unsigned long
long on all architectures, and similarly s64 as signed long long.
For consistency we also define u32, s32, u16, s16, u8 and s8. These
definitions are put in a new header, types.h, because these definitions
are needed in util/string.h and util/symbol.h.
The main change here is the mechanical change of __[us]{64,32,16,8}
to remove the "__". The other changes are:
* Create types.h
* Include types.h in perf.h, util/string.h and util/symbol.h
* Add types.h to the LIB_H definition in Makefile
* Added (u64) casts in process_overflow_event() and print_sym_table()
to kill two remaining warnings.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: benh@kernel.crashing.org
LKML-Reference: <19003.33494.495844.956580@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19 16:21:42 +04:00
printf ( " %Ld " , ( u64 ) attrs [ 0 ] . sample_period ) ;
2009-06-05 15:27:02 +04:00
if ( freq )
printf ( " Hz " ) ;
else
printf ( " " ) ;
}
2009-04-20 17:00:56 +04:00
2009-07-24 12:09:50 +04:00
if ( ! display_weighted )
printf ( " %s " , event_name ( sym_counter ) ) ;
else for ( counter = 0 ; counter < nr_counters ; counter + + ) {
2009-04-20 17:00:56 +04:00
if ( counter )
printf ( " / " ) ;
printf ( " %s " , event_name ( counter ) ) ;
}
printf ( " ], " ) ;
2009-05-26 11:17:18 +04:00
if ( target_pid ! = - 1 )
printf ( " (target_pid: %d " , target_pid ) ;
2009-04-20 17:00:56 +04:00
else
printf ( " (all " ) ;
if ( profile_cpu ! = - 1 )
printf ( " , cpu: %d) \n " , profile_cpu ) ;
else {
2009-05-26 11:17:18 +04:00
if ( target_pid ! = - 1 )
2009-04-20 17:00:56 +04:00
printf ( " ) \n " ) ;
else
printf ( " , %d CPUs) \n " , nr_cpus ) ;
}
2009-11-17 20:40:55 +03:00
printf ( " %-*.*s \n " , win_width , win_width , graph_dotted_line ) ;
2009-04-20 17:00:56 +04:00
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
if ( sym_filter_entry ) {
show_details ( sym_filter_entry ) ;
return ;
}
2009-11-17 20:40:54 +03:00
/*
* Find the longest symbol name that will be displayed
*/
for ( nd = rb_first ( & tmp ) ; nd ; nd = rb_next ( nd ) ) {
syme = rb_entry ( nd , struct sym_entry , rb_node ) ;
if ( + + printed > print_entries | |
( int ) syme - > snap_count < count_filter )
continue ;
2009-11-17 20:40:55 +03:00
if ( syme - > map - > dso - > long_name_len > dso_width )
dso_width = syme - > map - > dso - > long_name_len ;
2009-11-17 20:40:54 +03:00
if ( syme - > name_len > sym_width )
sym_width = syme - > name_len ;
}
printed = 0 ;
2009-11-24 17:05:14 +03:00
max_dso_width = winsize . ws_col - sym_width - 29 ;
if ( dso_width > max_dso_width )
dso_width = max_dso_width ;
putchar ( ' \n ' ) ;
2009-04-20 17:00:56 +04:00
if ( nr_counters = = 1 )
2009-10-27 00:23:19 +03:00
printf ( " samples pcnt " ) ;
2009-04-20 17:00:56 +04:00
else
2009-10-27 00:23:19 +03:00
printf ( " weight samples pcnt " ) ;
2009-04-20 17:00:56 +04:00
2009-08-26 18:51:26 +04:00
if ( verbose )
printf ( " RIP " ) ;
2009-11-24 17:05:14 +03:00
printf ( " %-*.*s DSO \n " , sym_width , sym_width , " function " ) ;
2009-10-27 00:23:19 +03:00
printf ( " %s _______ _____ " ,
2009-08-26 18:51:26 +04:00
nr_counters = = 1 ? " " : " ______ " ) ;
if ( verbose )
2009-10-27 00:23:19 +03:00
printf ( " ________________ " ) ;
2009-11-17 20:40:55 +03:00
printf ( " %-*.*s " , sym_width , sym_width , graph_line ) ;
2009-11-24 17:05:14 +03:00
printf ( " %-*.*s " , dso_width , dso_width , graph_line ) ;
2009-11-17 20:40:55 +03:00
puts ( " \n " ) ;
2009-04-20 17:00:56 +04:00
2009-05-28 21:55:41 +04:00
for ( nd = rb_first ( & tmp ) ; nd ; nd = rb_next ( nd ) ) {
2009-08-15 14:26:57 +04:00
struct symbol * sym ;
2009-06-04 17:19:47 +04:00
double pcnt ;
perf top: Reduce display overhead
Iterate over the symbol table once per display interval, and
copy/sort/tally/decay only those symbols which are active.
Before:
top - 10:14:53 up 4:08, 17 users, load average: 1.17, 1.53, 1.49
Tasks: 273 total, 5 running, 268 sleeping, 0 stopped, 0 zombie
Cpu(s): 6.9%us, 38.2%sy, 0.0%ni, 19.9%id, 0.0%wa, 0.0%hi, 35.0%si, 0.0%st
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND
28504 root 20 0 1044 260 164 S 58 0.0 0:04.19 2 netserver
28499 root 20 0 1040 412 316 R 51 0.0 0:04.15 0 netperf
28500 root 20 0 1040 408 316 R 50 0.0 0:04.14 1 netperf
28503 root 20 0 1044 260 164 S 50 0.0 0:04.01 1 netserver
28501 root 20 0 1044 260 164 S 49 0.0 0:03.99 0 netserver
28502 root 20 0 1040 412 316 S 43 0.0 0:03.96 2 netperf
28468 root 20 0 1892m 325m 972 S 16 10.8 0:10.50 3 perf
28467 root 20 0 1892m 325m 972 R 2 10.8 0:00.72 3 perf
After:
top - 10:16:30 up 4:10, 17 users, load average: 2.27, 1.88, 1.62
Tasks: 273 total, 6 running, 267 sleeping, 0 stopped, 0 zombie
Cpu(s): 2.5%us, 39.7%sy, 0.0%ni, 24.6%id, 0.0%wa, 0.0%hi, 33.3%si, 0.0%st
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND
28590 root 20 0 1040 412 316 S 54 0.0 0:07.85 2 netperf
28589 root 20 0 1044 260 164 R 54 0.0 0:07.84 0 netserver
28588 root 20 0 1040 412 316 R 50 0.0 0:07.89 1 netperf
28591 root 20 0 1044 256 164 S 50 0.0 0:07.82 1 netserver
28587 root 20 0 1040 408 316 R 47 0.0 0:07.61 0 netperf
28592 root 20 0 1044 260 164 R 47 0.0 0:07.85 2 netserver
28378 root 20 0 8732 1300 860 R 2 0.0 0:01.81 3 top
28577 root 20 0 1892m 165m 972 R 2 5.5 0:00.48 3 perf
28578 root 20 0 1892m 165m 972 S 2 5.5 0:00.04 3 perf
[ Impact: optimization ]
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 11:57:56 +04:00
2009-08-15 14:26:57 +04:00
syme = rb_entry ( nd , struct sym_entry , rb_node ) ;
2009-11-17 23:38:00 +03:00
sym = sym_entry__symbol ( syme ) ;
2009-08-15 14:26:57 +04:00
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
if ( + + printed > print_entries | | ( int ) syme - > snap_count < count_filter )
2009-05-30 00:03:07 +04:00
continue ;
perf top: Reduce display overhead
Iterate over the symbol table once per display interval, and
copy/sort/tally/decay only those symbols which are active.
Before:
top - 10:14:53 up 4:08, 17 users, load average: 1.17, 1.53, 1.49
Tasks: 273 total, 5 running, 268 sleeping, 0 stopped, 0 zombie
Cpu(s): 6.9%us, 38.2%sy, 0.0%ni, 19.9%id, 0.0%wa, 0.0%hi, 35.0%si, 0.0%st
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND
28504 root 20 0 1044 260 164 S 58 0.0 0:04.19 2 netserver
28499 root 20 0 1040 412 316 R 51 0.0 0:04.15 0 netperf
28500 root 20 0 1040 408 316 R 50 0.0 0:04.14 1 netperf
28503 root 20 0 1044 260 164 S 50 0.0 0:04.01 1 netserver
28501 root 20 0 1044 260 164 S 49 0.0 0:03.99 0 netserver
28502 root 20 0 1040 412 316 S 43 0.0 0:03.96 2 netperf
28468 root 20 0 1892m 325m 972 S 16 10.8 0:10.50 3 perf
28467 root 20 0 1892m 325m 972 R 2 10.8 0:00.72 3 perf
After:
top - 10:16:30 up 4:10, 17 users, load average: 2.27, 1.88, 1.62
Tasks: 273 total, 6 running, 267 sleeping, 0 stopped, 0 zombie
Cpu(s): 2.5%us, 39.7%sy, 0.0%ni, 24.6%id, 0.0%wa, 0.0%hi, 33.3%si, 0.0%st
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND
28590 root 20 0 1040 412 316 S 54 0.0 0:07.85 2 netperf
28589 root 20 0 1044 260 164 R 54 0.0 0:07.84 0 netserver
28588 root 20 0 1040 412 316 R 50 0.0 0:07.89 1 netperf
28591 root 20 0 1044 256 164 S 50 0.0 0:07.82 1 netserver
28587 root 20 0 1040 408 316 R 47 0.0 0:07.61 0 netperf
28592 root 20 0 1044 260 164 R 47 0.0 0:07.85 2 netserver
28378 root 20 0 8732 1300 860 R 2 0.0 0:01.81 3 top
28577 root 20 0 1892m 165m 972 R 2 5.5 0:00.48 3 perf
28578 root 20 0 1892m 165m 972 S 2 5.5 0:00.04 3 perf
[ Impact: optimization ]
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 11:57:56 +04:00
2009-06-05 16:29:10 +04:00
pcnt = 100.0 - ( 100.0 * ( ( sum_ksamples - syme - > snap_count ) /
sum_ksamples ) ) ;
perf top: Reduce display overhead
Iterate over the symbol table once per display interval, and
copy/sort/tally/decay only those symbols which are active.
Before:
top - 10:14:53 up 4:08, 17 users, load average: 1.17, 1.53, 1.49
Tasks: 273 total, 5 running, 268 sleeping, 0 stopped, 0 zombie
Cpu(s): 6.9%us, 38.2%sy, 0.0%ni, 19.9%id, 0.0%wa, 0.0%hi, 35.0%si, 0.0%st
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND
28504 root 20 0 1044 260 164 S 58 0.0 0:04.19 2 netserver
28499 root 20 0 1040 412 316 R 51 0.0 0:04.15 0 netperf
28500 root 20 0 1040 408 316 R 50 0.0 0:04.14 1 netperf
28503 root 20 0 1044 260 164 S 50 0.0 0:04.01 1 netserver
28501 root 20 0 1044 260 164 S 49 0.0 0:03.99 0 netserver
28502 root 20 0 1040 412 316 S 43 0.0 0:03.96 2 netperf
28468 root 20 0 1892m 325m 972 S 16 10.8 0:10.50 3 perf
28467 root 20 0 1892m 325m 972 R 2 10.8 0:00.72 3 perf
After:
top - 10:16:30 up 4:10, 17 users, load average: 2.27, 1.88, 1.62
Tasks: 273 total, 6 running, 267 sleeping, 0 stopped, 0 zombie
Cpu(s): 2.5%us, 39.7%sy, 0.0%ni, 24.6%id, 0.0%wa, 0.0%hi, 33.3%si, 0.0%st
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND
28590 root 20 0 1040 412 316 S 54 0.0 0:07.85 2 netperf
28589 root 20 0 1044 260 164 R 54 0.0 0:07.84 0 netserver
28588 root 20 0 1040 412 316 R 50 0.0 0:07.89 1 netperf
28591 root 20 0 1044 256 164 S 50 0.0 0:07.82 1 netserver
28587 root 20 0 1040 408 316 R 47 0.0 0:07.61 0 netperf
28592 root 20 0 1044 260 164 R 47 0.0 0:07.85 2 netserver
28378 root 20 0 8732 1300 860 R 2 0.0 0:01.81 3 top
28577 root 20 0 1892m 165m 972 R 2 5.5 0:00.48 3 perf
28578 root 20 0 1892m 165m 972 S 2 5.5 0:00.04 3 perf
[ Impact: optimization ]
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 11:57:56 +04:00
2009-07-24 12:09:50 +04:00
if ( nr_counters = = 1 | | ! display_weighted )
2009-10-27 00:23:19 +03:00
printf ( " %20.2f " , syme - > weight ) ;
perf top: Reduce display overhead
Iterate over the symbol table once per display interval, and
copy/sort/tally/decay only those symbols which are active.
Before:
top - 10:14:53 up 4:08, 17 users, load average: 1.17, 1.53, 1.49
Tasks: 273 total, 5 running, 268 sleeping, 0 stopped, 0 zombie
Cpu(s): 6.9%us, 38.2%sy, 0.0%ni, 19.9%id, 0.0%wa, 0.0%hi, 35.0%si, 0.0%st
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND
28504 root 20 0 1044 260 164 S 58 0.0 0:04.19 2 netserver
28499 root 20 0 1040 412 316 R 51 0.0 0:04.15 0 netperf
28500 root 20 0 1040 408 316 R 50 0.0 0:04.14 1 netperf
28503 root 20 0 1044 260 164 S 50 0.0 0:04.01 1 netserver
28501 root 20 0 1044 260 164 S 49 0.0 0:03.99 0 netserver
28502 root 20 0 1040 412 316 S 43 0.0 0:03.96 2 netperf
28468 root 20 0 1892m 325m 972 S 16 10.8 0:10.50 3 perf
28467 root 20 0 1892m 325m 972 R 2 10.8 0:00.72 3 perf
After:
top - 10:16:30 up 4:10, 17 users, load average: 2.27, 1.88, 1.62
Tasks: 273 total, 6 running, 267 sleeping, 0 stopped, 0 zombie
Cpu(s): 2.5%us, 39.7%sy, 0.0%ni, 24.6%id, 0.0%wa, 0.0%hi, 33.3%si, 0.0%st
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND
28590 root 20 0 1040 412 316 S 54 0.0 0:07.85 2 netperf
28589 root 20 0 1044 260 164 R 54 0.0 0:07.84 0 netserver
28588 root 20 0 1040 412 316 R 50 0.0 0:07.89 1 netperf
28591 root 20 0 1044 256 164 S 50 0.0 0:07.82 1 netserver
28587 root 20 0 1040 408 316 R 47 0.0 0:07.61 0 netperf
28592 root 20 0 1044 260 164 R 47 0.0 0:07.85 2 netserver
28378 root 20 0 8732 1300 860 R 2 0.0 0:01.81 3 top
28577 root 20 0 1892m 165m 972 R 2 5.5 0:00.48 3 perf
28578 root 20 0 1892m 165m 972 S 2 5.5 0:00.04 3 perf
[ Impact: optimization ]
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 11:57:56 +04:00
else
2009-10-27 00:23:19 +03:00
printf ( " %9.1f %10ld " , syme - > weight , syme - > snap_count ) ;
2009-06-04 17:19:47 +04:00
2009-07-02 22:14:34 +04:00
percent_color_fprintf ( stdout , " %4.1f%% " , pcnt ) ;
2009-08-26 18:51:26 +04:00
if ( verbose )
2009-10-27 00:23:19 +03:00
printf ( " %016llx " , sym - > start ) ;
2009-11-17 20:40:54 +03:00
printf ( " %-*.*s " , sym_width , sym_width , sym - > name ) ;
2009-11-24 17:05:14 +03:00
printf ( " %-*.*s \n " , dso_width , dso_width ,
dso_width > = syme - > map - > dso - > long_name_len ?
syme - > map - > dso - > long_name :
syme - > map - > dso - > short_name ) ;
2009-04-20 17:00:56 +04:00
}
}
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
static void prompt_integer ( int * target , const char * msg )
{
char * buf = malloc ( 0 ) , * p ;
size_t dummy = 0 ;
int tmp ;
fprintf ( stdout , " \n %s: " , msg ) ;
if ( getline ( & buf , & dummy , stdin ) < 0 )
return ;
p = strchr ( buf , ' \n ' ) ;
if ( p )
* p = 0 ;
p = buf ;
while ( * p ) {
if ( ! isdigit ( * p ) )
goto out_free ;
p + + ;
}
tmp = strtoul ( buf , NULL , 10 ) ;
* target = tmp ;
out_free :
free ( buf ) ;
}
static void prompt_percent ( int * target , const char * msg )
{
int tmp = 0 ;
prompt_integer ( & tmp , msg ) ;
if ( tmp > = 0 & & tmp < = 100 )
* target = tmp ;
}
static void prompt_symbol ( struct sym_entry * * target , const char * msg )
{
char * buf = malloc ( 0 ) , * p ;
struct sym_entry * syme = * target , * n , * found = NULL ;
size_t dummy = 0 ;
/* zero counters of active symbol */
if ( syme ) {
2009-11-17 23:38:02 +03:00
pthread_mutex_lock ( & syme - > src - > lock ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
__zero_source_counters ( syme ) ;
* target = NULL ;
2009-11-17 23:38:02 +03:00
pthread_mutex_unlock ( & syme - > src - > lock ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
}
fprintf ( stdout , " \n %s: " , msg ) ;
if ( getline ( & buf , & dummy , stdin ) < 0 )
goto out_free ;
p = strchr ( buf , ' \n ' ) ;
if ( p )
* p = 0 ;
pthread_mutex_lock ( & active_symbols_lock ) ;
syme = list_entry ( active_symbols . next , struct sym_entry , node ) ;
pthread_mutex_unlock ( & active_symbols_lock ) ;
list_for_each_entry_safe_from ( syme , n , & active_symbols , node ) {
2009-11-17 23:38:00 +03:00
struct symbol * sym = sym_entry__symbol ( syme ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
if ( ! strcmp ( buf , sym - > name ) ) {
found = syme ;
break ;
}
}
if ( ! found ) {
2010-01-13 18:22:19 +03:00
fprintf ( stderr , " Sorry, %s is not active. \n " , buf ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
sleep ( 1 ) ;
return ;
} else
parse_source ( found ) ;
out_free :
free ( buf ) ;
}
2009-08-04 12:21:23 +04:00
static void print_mapped_keys ( void )
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
{
2009-08-04 12:21:23 +04:00
char * name = NULL ;
if ( sym_filter_entry ) {
2009-11-17 23:38:00 +03:00
struct symbol * sym = sym_entry__symbol ( sym_filter_entry ) ;
2009-08-04 12:21:23 +04:00
name = sym - > name ;
}
fprintf ( stdout , " \n Mapped keys: \n " ) ;
fprintf ( stdout , " \t [d] display refresh delay. \t (%d) \n " , delay_secs ) ;
fprintf ( stdout , " \t [e] display entries (lines). \t (%d) \n " , print_entries ) ;
if ( nr_counters > 1 )
fprintf ( stdout , " \t [E] active event counter. \t (%s) \n " , event_name ( sym_counter ) ) ;
fprintf ( stdout , " \t [f] profile display filter (count). \t (%d) \n " , count_filter ) ;
2010-02-03 21:52:08 +03:00
fprintf ( stdout , " \t [F] annotate display filter (percent). \t (%d%%) \n " , sym_pcnt_filter ) ;
fprintf ( stdout , " \t [s] annotate symbol. \t (%s) \n " , name ? : " NULL " ) ;
fprintf ( stdout , " \t [S] stop annotation. \n " ) ;
2009-08-04 12:21:23 +04:00
if ( nr_counters > 1 )
fprintf ( stdout , " \t [w] toggle display weighted/count[E]r. \t (%d) \n " , display_weighted ? 1 : 0 ) ;
2009-11-17 02:45:24 +03:00
fprintf ( stdout ,
2010-02-12 19:20:59 +03:00
" \t [K] hide kernel_symbols symbols. \t (%s) \n " ,
2009-11-17 02:45:24 +03:00
hide_kernel_symbols ? " yes " : " no " ) ;
fprintf ( stdout ,
" \t [U] hide user symbols. \t (%s) \n " ,
hide_user_symbols ? " yes " : " no " ) ;
2009-07-24 12:09:50 +04:00
fprintf ( stdout , " \t [z] toggle sample zeroing. \t (%d) \n " , zero ? 1 : 0 ) ;
2009-08-04 12:21:23 +04:00
fprintf ( stdout , " \t [qQ] quit. \n " ) ;
}
static int key_mapped ( int c )
{
switch ( c ) {
case ' d ' :
case ' e ' :
case ' f ' :
case ' z ' :
case ' q ' :
case ' Q ' :
2009-11-17 02:45:24 +03:00
case ' K ' :
case ' U ' :
2010-02-03 21:52:08 +03:00
case ' F ' :
case ' s ' :
case ' S ' :
2009-08-04 12:21:23 +04:00
return 1 ;
case ' E ' :
case ' w ' :
return nr_counters > 1 ? 1 : 0 ;
2009-08-15 14:26:57 +04:00
default :
break ;
2009-08-04 12:21:23 +04:00
}
return 0 ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
}
static void handle_keypress ( int c )
{
2009-08-04 12:21:23 +04:00
if ( ! key_mapped ( c ) ) {
struct pollfd stdin_poll = { . fd = 0 , . events = POLLIN } ;
struct termios tc , save ;
print_mapped_keys ( ) ;
fprintf ( stdout , " \n Enter selection, or unmapped key to continue: " ) ;
fflush ( stdout ) ;
tcgetattr ( 0 , & save ) ;
tc = save ;
tc . c_lflag & = ~ ( ICANON | ECHO ) ;
tc . c_cc [ VMIN ] = 0 ;
tc . c_cc [ VTIME ] = 0 ;
tcsetattr ( 0 , TCSANOW , & tc ) ;
poll ( & stdin_poll , 1 , - 1 ) ;
c = getc ( stdin ) ;
tcsetattr ( 0 , TCSAFLUSH , & save ) ;
if ( ! key_mapped ( c ) )
return ;
}
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
switch ( c ) {
case ' d ' :
prompt_integer ( & delay_secs , " Enter display delay " ) ;
2009-10-17 20:08:29 +04:00
if ( delay_secs < 1 )
delay_secs = 1 ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
break ;
case ' e ' :
prompt_integer ( & print_entries , " Enter display entries (lines) " ) ;
2009-11-17 00:30:27 +03:00
if ( print_entries = = 0 ) {
2009-11-17 20:40:54 +03:00
sig_winch_handler ( SIGWINCH ) ;
2009-11-17 00:30:27 +03:00
signal ( SIGWINCH , sig_winch_handler ) ;
} else
signal ( SIGWINCH , SIG_DFL ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
break ;
case ' E ' :
if ( nr_counters > 1 ) {
int i ;
fprintf ( stderr , " \n Available events: " ) ;
for ( i = 0 ; i < nr_counters ; i + + )
fprintf ( stderr , " \n \t %d %s " , i , event_name ( i ) ) ;
prompt_integer ( & sym_counter , " Enter details event counter " ) ;
if ( sym_counter > = nr_counters ) {
fprintf ( stderr , " Sorry, no such event, using %s. \n " , event_name ( 0 ) ) ;
sym_counter = 0 ;
sleep ( 1 ) ;
}
} else sym_counter = 0 ;
break ;
case ' f ' :
prompt_integer ( & count_filter , " Enter display event count filter " ) ;
break ;
case ' F ' :
prompt_percent ( & sym_pcnt_filter , " Enter details display event filter (percent) " ) ;
break ;
2009-11-17 02:45:24 +03:00
case ' K ' :
hide_kernel_symbols = ! hide_kernel_symbols ;
break ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
case ' q ' :
case ' Q ' :
printf ( " exiting. \n " ) ;
2009-11-21 01:51:27 +03:00
if ( dump_symtab )
dsos__fprintf ( stderr ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
exit ( 0 ) ;
case ' s ' :
prompt_symbol ( & sym_filter_entry , " Enter details symbol " ) ;
break ;
case ' S ' :
if ( ! sym_filter_entry )
break ;
else {
struct sym_entry * syme = sym_filter_entry ;
2009-11-17 23:38:02 +03:00
pthread_mutex_lock ( & syme - > src - > lock ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
sym_filter_entry = NULL ;
__zero_source_counters ( syme ) ;
2009-11-17 23:38:02 +03:00
pthread_mutex_unlock ( & syme - > src - > lock ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
}
break ;
2009-11-17 02:45:24 +03:00
case ' U ' :
hide_user_symbols = ! hide_user_symbols ;
break ;
2009-07-24 12:09:50 +04:00
case ' w ' :
display_weighted = ~ display_weighted ;
break ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
case ' z ' :
zero = ~ zero ;
break ;
2009-08-15 14:26:57 +04:00
default :
break ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
}
}
2009-07-01 14:37:06 +04:00
static void * display_thread ( void * arg __used )
2009-04-20 17:00:56 +04:00
{
2009-06-04 22:48:04 +04:00
struct pollfd stdin_poll = { . fd = 0 , . events = POLLIN } ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
struct termios tc , save ;
int delay_msecs , c ;
tcgetattr ( 0 , & save ) ;
tc = save ;
tc . c_lflag & = ~ ( ICANON | ECHO ) ;
tc . c_cc [ VMIN ] = 0 ;
tc . c_cc [ VTIME ] = 0 ;
2009-08-04 12:21:23 +04:00
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
repeat :
delay_msecs = delay_secs * 1000 ;
tcsetattr ( 0 , TCSANOW , & tc ) ;
/* trash return*/
getc ( stdin ) ;
2009-04-20 17:00:56 +04:00
2009-06-04 22:48:04 +04:00
do {
2009-04-20 17:00:56 +04:00
print_sym_table ( ) ;
2009-06-04 22:48:04 +04:00
} while ( ! poll ( & stdin_poll , 1 , delay_msecs ) = = 1 ) ;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
c = getc ( stdin ) ;
tcsetattr ( 0 , TCSAFLUSH , & save ) ;
handle_keypress ( c ) ;
goto repeat ;
2009-04-20 17:00:56 +04:00
return NULL ;
}
2009-07-01 03:00:46 +04:00
/* Tag samples to be skipped. */
2009-07-01 14:37:06 +04:00
static const char * skip_symbols [ ] = {
2009-07-01 03:00:46 +04:00
" default_idle " ,
" cpu_idle " ,
" enter_idle " ,
" exit_idle " ,
" mwait_idle " ,
2009-07-27 02:06:19 +04:00
" mwait_idle_with_hints " ,
2009-09-26 02:02:39 +04:00
" poll_idle " ,
2009-07-01 03:00:47 +04:00
" ppc64_runlatch_off " ,
" pseries_dedicated_idle_sleep " ,
2009-07-01 03:00:46 +04:00
NULL
} ;
2009-10-02 10:29:58 +04:00
static int symbol_filter ( struct map * map , struct symbol * sym )
2009-04-20 17:00:56 +04:00
{
2009-05-28 21:55:41 +04:00
struct sym_entry * syme ;
const char * name = sym - > name ;
2009-07-01 03:00:46 +04:00
int i ;
2009-05-28 21:55:41 +04:00
2009-07-01 03:00:47 +04:00
/*
* ppc64 uses function descriptors and appends a ' . ' to the
* start of every instruction address . Remove it .
*/
if ( name [ 0 ] = = ' . ' )
name + + ;
2009-05-28 21:55:41 +04:00
if ( ! strcmp ( name , " _text " ) | |
! strcmp ( name , " _etext " ) | |
! strcmp ( name , " _sinittext " ) | |
! strncmp ( " init_module " , name , 11 ) | |
! strncmp ( " cleanup_module " , name , 14 ) | |
strstr ( name , " _text_start " ) | |
strstr ( name , " _text_end " ) )
2009-04-20 17:00:56 +04:00
return 1 ;
2009-10-30 21:28:24 +03:00
syme = symbol__priv ( sym ) ;
2009-10-02 10:29:58 +04:00
syme - > map = map ;
2009-11-17 23:38:02 +03:00
syme - > src = NULL ;
2010-02-03 21:52:08 +03:00
if ( ! sym_filter_entry & & sym_filter & & ! strcmp ( name , sym_filter ) ) {
/* schedule initial sym_filter_entry setup */
sym_filter_entry_sched = syme ;
sym_filter = NULL ;
}
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
2009-07-01 03:00:46 +04:00
for ( i = 0 ; skip_symbols [ i ] ; i + + ) {
if ( ! strcmp ( skip_symbols [ i ] , name ) ) {
syme - > skip = 1 ;
break ;
}
}
2009-04-20 17:00:56 +04:00
2009-11-17 20:40:54 +03:00
if ( ! syme - > skip )
syme - > name_len = strlen ( sym - > name ) ;
2009-04-20 17:00:56 +04:00
return 0 ;
}
2009-12-14 00:50:28 +03:00
static void event__process_sample ( const event_t * self ,
struct perf_session * session , int counter )
2009-04-20 17:00:56 +04:00
{
2009-10-27 00:23:19 +03:00
u64 ip = self - > ip . ip ;
struct sym_entry * syme ;
perf tools: Consolidate symbol resolving across all tools
Now we have a very high level routine for simple tools to
process IP sample events:
int event__preprocess_sample(const event_t *self,
struct addr_location *al,
symbol_filter_t filter)
It receives the event itself and will insert new threads in the
global threads list and resolve the map and symbol, filling all
this info into the new addr_location struct, so that tools like
annotate and report can further process the event by creating
hist_entries in their specific way (with or without callgraphs,
etc).
It in turn uses the new next layer function:
void thread__find_addr_location(struct thread *self, u8 cpumode,
enum map_type type, u64 addr,
struct addr_location *al,
symbol_filter_t filter)
This one will, given a thread (userspace or the kernel kthread
one), will find the given type (MAP__FUNCTION now, MAP__VARIABLE
too in the near future) at the given cpumode, taking vdsos into
account (userspace hit, but kernel symbol) and will fill all
these details in the addr_location given.
Tools that need a more compact API for plain function
resolution, like 'kmem', can use this other one:
struct symbol *thread__find_function(struct thread *self, u64 addr,
symbol_filter_t filter)
So, to resolve a kernel symbol, that is all the 'kmem' tool
needs, its just a matter of calling:
sym = thread__find_function(kthread, addr, NULL);
The 'filter' parameter is needed because we do lazy
parsing/loading of ELF symtabs or /proc/kallsyms.
With this we remove more code duplication all around, which is
always good, huh? :-)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-12-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-27 21:29:23 +03:00
struct addr_location al ;
2009-11-17 02:45:24 +03:00
u8 origin = self - > header . misc & PERF_RECORD_MISC_CPUMODE_MASK ;
2009-10-27 00:23:19 +03:00
2010-01-21 18:04:43 +03:00
+ + samples ;
2009-11-17 02:45:24 +03:00
switch ( origin ) {
perf tools: Consolidate symbol resolving across all tools
Now we have a very high level routine for simple tools to
process IP sample events:
int event__preprocess_sample(const event_t *self,
struct addr_location *al,
symbol_filter_t filter)
It receives the event itself and will insert new threads in the
global threads list and resolve the map and symbol, filling all
this info into the new addr_location struct, so that tools like
annotate and report can further process the event by creating
hist_entries in their specific way (with or without callgraphs,
etc).
It in turn uses the new next layer function:
void thread__find_addr_location(struct thread *self, u8 cpumode,
enum map_type type, u64 addr,
struct addr_location *al,
symbol_filter_t filter)
This one will, given a thread (userspace or the kernel kthread
one), will find the given type (MAP__FUNCTION now, MAP__VARIABLE
too in the near future) at the given cpumode, taking vdsos into
account (userspace hit, but kernel symbol) and will fill all
these details in the addr_location given.
Tools that need a more compact API for plain function
resolution, like 'kmem', can use this other one:
struct symbol *thread__find_function(struct thread *self, u64 addr,
symbol_filter_t filter)
So, to resolve a kernel symbol, that is all the 'kmem' tool
needs, its just a matter of calling:
sym = thread__find_function(kthread, addr, NULL);
The 'filter' parameter is needed because we do lazy
parsing/loading of ELF symtabs or /proc/kallsyms.
With this we remove more code duplication all around, which is
always good, huh? :-)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-12-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-27 21:29:23 +03:00
case PERF_RECORD_MISC_USER :
2010-01-21 18:04:43 +03:00
+ + userspace_samples ;
2009-11-17 02:45:24 +03:00
if ( hide_user_symbols )
return ;
perf tools: Consolidate symbol resolving across all tools
Now we have a very high level routine for simple tools to
process IP sample events:
int event__preprocess_sample(const event_t *self,
struct addr_location *al,
symbol_filter_t filter)
It receives the event itself and will insert new threads in the
global threads list and resolve the map and symbol, filling all
this info into the new addr_location struct, so that tools like
annotate and report can further process the event by creating
hist_entries in their specific way (with or without callgraphs,
etc).
It in turn uses the new next layer function:
void thread__find_addr_location(struct thread *self, u8 cpumode,
enum map_type type, u64 addr,
struct addr_location *al,
symbol_filter_t filter)
This one will, given a thread (userspace or the kernel kthread
one), will find the given type (MAP__FUNCTION now, MAP__VARIABLE
too in the near future) at the given cpumode, taking vdsos into
account (userspace hit, but kernel symbol) and will fill all
these details in the addr_location given.
Tools that need a more compact API for plain function
resolution, like 'kmem', can use this other one:
struct symbol *thread__find_function(struct thread *self, u64 addr,
symbol_filter_t filter)
So, to resolve a kernel symbol, that is all the 'kmem' tool
needs, its just a matter of calling:
sym = thread__find_function(kthread, addr, NULL);
The 'filter' parameter is needed because we do lazy
parsing/loading of ELF symtabs or /proc/kallsyms.
With this we remove more code duplication all around, which is
always good, huh? :-)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-12-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-27 21:29:23 +03:00
break ;
2009-10-27 00:23:19 +03:00
case PERF_RECORD_MISC_KERNEL :
2009-11-17 02:45:24 +03:00
if ( hide_kernel_symbols )
return ;
2009-10-27 00:23:19 +03:00
break ;
default :
return ;
}
2010-03-04 16:19:36 +03:00
if ( self - > header . misc & PERF_RECORD_MISC_EXACT )
exact_samples + + ;
2009-12-14 00:50:28 +03:00
if ( event__preprocess_sample ( self , session , & al , symbol_filter ) < 0 | |
2010-01-28 02:05:49 +03:00
al . filtered )
perf tools: Consolidate symbol resolving across all tools
Now we have a very high level routine for simple tools to
process IP sample events:
int event__preprocess_sample(const event_t *self,
struct addr_location *al,
symbol_filter_t filter)
It receives the event itself and will insert new threads in the
global threads list and resolve the map and symbol, filling all
this info into the new addr_location struct, so that tools like
annotate and report can further process the event by creating
hist_entries in their specific way (with or without callgraphs,
etc).
It in turn uses the new next layer function:
void thread__find_addr_location(struct thread *self, u8 cpumode,
enum map_type type, u64 addr,
struct addr_location *al,
symbol_filter_t filter)
This one will, given a thread (userspace or the kernel kthread
one), will find the given type (MAP__FUNCTION now, MAP__VARIABLE
too in the near future) at the given cpumode, taking vdsos into
account (userspace hit, but kernel symbol) and will fill all
these details in the addr_location given.
Tools that need a more compact API for plain function
resolution, like 'kmem', can use this other one:
struct symbol *thread__find_function(struct thread *self, u64 addr,
symbol_filter_t filter)
So, to resolve a kernel symbol, that is all the 'kmem' tool
needs, its just a matter of calling:
sym = thread__find_function(kthread, addr, NULL);
The 'filter' parameter is needed because we do lazy
parsing/loading of ELF symtabs or /proc/kallsyms.
With this we remove more code duplication all around, which is
always good, huh? :-)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-12-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-27 21:29:23 +03:00
return ;
2009-04-20 17:00:56 +04:00
2010-01-28 02:05:49 +03:00
if ( al . sym = = NULL ) {
/*
* As we do lazy loading of symtabs we only will know if the
* specified vmlinux file is invalid when we actually have a
* hit in kernel space and then try to load it . So if we get
* here and there are _no_ symbols in the DSO backing the
* kernel map , bail out .
*
* We may never get here , for instance , if we use - K /
* - - hide - kernel - symbols , even if the user specifies an
* invalid - - vmlinux ; - )
*/
if ( al . map = = session - > vmlinux_maps [ MAP__FUNCTION ] & &
RB_EMPTY_ROOT ( & al . map - > dso - > symbols [ MAP__FUNCTION ] ) ) {
pr_err ( " The %s file can't be used \n " ,
symbol_conf . vmlinux_name ) ;
exit ( 1 ) ;
}
return ;
}
2010-02-03 21:52:08 +03:00
/* let's see, whether we need to install initial sym_filter_entry */
if ( sym_filter_entry_sched ) {
sym_filter_entry = sym_filter_entry_sched ;
sym_filter_entry_sched = NULL ;
parse_source ( sym_filter_entry ) ;
}
perf tools: Consolidate symbol resolving across all tools
Now we have a very high level routine for simple tools to
process IP sample events:
int event__preprocess_sample(const event_t *self,
struct addr_location *al,
symbol_filter_t filter)
It receives the event itself and will insert new threads in the
global threads list and resolve the map and symbol, filling all
this info into the new addr_location struct, so that tools like
annotate and report can further process the event by creating
hist_entries in their specific way (with or without callgraphs,
etc).
It in turn uses the new next layer function:
void thread__find_addr_location(struct thread *self, u8 cpumode,
enum map_type type, u64 addr,
struct addr_location *al,
symbol_filter_t filter)
This one will, given a thread (userspace or the kernel kthread
one), will find the given type (MAP__FUNCTION now, MAP__VARIABLE
too in the near future) at the given cpumode, taking vdsos into
account (userspace hit, but kernel symbol) and will fill all
these details in the addr_location given.
Tools that need a more compact API for plain function
resolution, like 'kmem', can use this other one:
struct symbol *thread__find_function(struct thread *self, u64 addr,
symbol_filter_t filter)
So, to resolve a kernel symbol, that is all the 'kmem' tool
needs, its just a matter of calling:
sym = thread__find_function(kthread, addr, NULL);
The 'filter' parameter is needed because we do lazy
parsing/loading of ELF symtabs or /proc/kallsyms.
With this we remove more code duplication all around, which is
always good, huh? :-)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-12-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-27 21:29:23 +03:00
syme = symbol__priv ( al . sym ) ;
2009-10-27 00:23:19 +03:00
if ( ! syme - > skip ) {
syme - > count [ counter ] + + ;
2009-11-17 02:45:24 +03:00
syme - > origin = origin ;
2009-10-27 00:23:19 +03:00
record_precise_ip ( syme , counter , ip ) ;
pthread_mutex_lock ( & active_symbols_lock ) ;
if ( list_empty ( & syme - > node ) | | ! syme - > node . next )
__list_insert_active_sym ( syme ) ;
pthread_mutex_unlock ( & active_symbols_lock ) ;
}
2009-04-20 17:00:56 +04:00
}
2009-12-14 00:50:24 +03:00
static int event__process ( event_t * event , struct perf_session * session )
2009-10-27 00:23:19 +03:00
{
switch ( event - > header . type ) {
case PERF_RECORD_COMM :
2009-12-14 00:50:24 +03:00
event__process_comm ( event , session ) ;
2009-10-27 00:23:19 +03:00
break ;
case PERF_RECORD_MMAP :
2009-12-14 00:50:24 +03:00
event__process_mmap ( event , session ) ;
2009-10-27 00:23:19 +03:00
break ;
2010-01-21 18:04:44 +03:00
case PERF_RECORD_FORK :
case PERF_RECORD_EXIT :
event__process_task ( event , session ) ;
break ;
2009-10-27 00:23:19 +03:00
default :
break ;
2009-04-20 17:00:56 +04:00
}
2009-10-27 00:23:19 +03:00
return 0 ;
2009-04-20 17:00:56 +04:00
}
struct mmap_data {
2009-06-06 11:58:57 +04:00
int counter ;
void * base ;
2009-07-01 14:37:06 +04:00
int mask ;
2009-06-06 11:58:57 +04:00
unsigned int prev ;
2009-04-20 17:00:56 +04:00
} ;
static unsigned int mmap_read_head ( struct mmap_data * md )
{
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:02:48 +04:00
struct perf_event_mmap_page * pc = md - > base ;
2009-04-20 17:00:56 +04:00
int head ;
head = pc - > data_head ;
rmb ( ) ;
return head ;
}
2009-12-14 00:50:24 +03:00
static void perf_session__mmap_read_counter ( struct perf_session * self ,
struct mmap_data * md )
2009-04-20 17:00:56 +04:00
{
unsigned int head = mmap_read_head ( md ) ;
unsigned int old = md - > prev ;
unsigned char * data = md - > base + page_size ;
int diff ;
/*
* If we ' re further behind than half the buffer , there ' s a chance
2009-06-05 16:29:10 +04:00
* the writer will bite our tail and mess up the samples under us .
2009-04-20 17:00:56 +04:00
*
* If we somehow ended up ahead of the head , we got messed up .
*
* In either case , truncate and restart at head .
*/
diff = head - old ;
if ( diff > md - > mask / 2 | | diff < 0 ) {
2009-10-13 16:57:20 +04:00
fprintf ( stderr , " WARNING: failed to keep up with mmap data. \n " ) ;
2009-04-20 17:00:56 +04:00
/*
* head points to a known good entry , start there .
*/
old = head ;
}
for ( ; old ! = head ; ) {
event_t * event = ( event_t * ) & data [ old & md - > mask ] ;
event_t event_copy ;
2009-04-20 17:22:22 +04:00
size_t size = event - > header . size ;
2009-04-20 17:00:56 +04:00
/*
* Event straddles the mmap boundary - - header should always
* be inside due to u64 alignment of output .
*/
if ( ( old & md - > mask ) + size ! = ( ( old + size ) & md - > mask ) ) {
unsigned int offset = old ;
unsigned int len = min ( sizeof ( * event ) , size ) , cpy ;
void * dst = & event_copy ;
do {
cpy = min ( md - > mask + 1 - ( offset & md - > mask ) , len ) ;
memcpy ( dst , & data [ offset & md - > mask ] , cpy ) ;
offset + = cpy ;
dst + = cpy ;
len - = cpy ;
} while ( len ) ;
event = & event_copy ;
}
2009-10-27 00:23:19 +03:00
if ( event - > header . type = = PERF_RECORD_SAMPLE )
2009-12-14 00:50:28 +03:00
event__process_sample ( event , self , md - > counter ) ;
2009-10-27 00:23:19 +03:00
else
2009-12-14 00:50:24 +03:00
event__process ( event , self ) ;
2009-04-20 17:00:56 +04:00
old + = size ;
}
md - > prev = old ;
}
2009-05-24 10:35:49 +04:00
static struct pollfd event_array [ MAX_NR_CPUS * MAX_COUNTERS ] ;
static struct mmap_data mmap_array [ MAX_NR_CPUS ] [ MAX_COUNTERS ] ;
2009-12-14 00:50:24 +03:00
static void perf_session__mmap_read ( struct perf_session * self )
2009-06-07 01:10:43 +04:00
{
int i , counter ;
for ( i = 0 ; i < nr_cpus ; i + + ) {
for ( counter = 0 ; counter < nr_counters ; counter + + )
2009-12-14 00:50:24 +03:00
perf_session__mmap_read_counter ( self , & mmap_array [ i ] [ counter ] ) ;
2009-06-07 01:10:43 +04:00
}
}
2009-06-07 19:31:52 +04:00
int nr_poll ;
int group_fd ;
static void start_counter ( int i , int counter )
2009-04-20 17:00:56 +04:00
{
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:02:48 +04:00
struct perf_event_attr * attr ;
2009-07-21 12:30:36 +04:00
int cpu ;
2009-06-07 19:31:52 +04:00
cpu = profile_cpu ;
if ( target_pid = = - 1 & & profile_cpu = = - 1 )
perf tools: Fix sparse CPU numbering related bugs
At present, the perf subcommands that do system-wide monitoring
(perf stat, perf record and perf top) don't work properly unless
the online cpus are numbered 0, 1, ..., N-1. These tools ask
for the number of online cpus with sysconf(_SC_NPROCESSORS_ONLN)
and then try to create events for cpus 0, 1, ..., N-1.
This creates problems for systems where the online cpus are
numbered sparsely. For example, a POWER6 system in
single-threaded mode (i.e. only running 1 hardware thread per
core) will have only even-numbered cpus online.
This fixes the problem by reading the /sys/devices/system/cpu/online
file to find out which cpus are online. The code that does that is in
tools/perf/util/cpumap.[ch], and consists of a read_cpu_map()
function that sets up a cpumap[] array and returns the number of
online cpus. If /sys/devices/system/cpu/online can't be read or
can't be parsed successfully, it falls back to using sysconf to
ask how many cpus are online and sets up an identity map in cpumap[].
The perf record, perf stat and perf top code then calls
read_cpu_map() in the system-wide monitoring case (instead of
sysconf) and uses cpumap[] to get the cpu numbers to pass to
perf_event_open.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <20100310093609.GA3959@brick.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10 12:36:09 +03:00
cpu = cpumap [ i ] ;
2009-06-07 19:31:52 +04:00
attr = attrs + counter ;
attr - > sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID ;
2009-10-12 09:56:03 +04:00
if ( freq ) {
attr - > sample_type | = PERF_SAMPLE_PERIOD ;
attr - > freq = 1 ;
attr - > sample_freq = freq ;
}
2009-07-21 12:30:36 +04:00
attr - > inherit = ( cpu < 0 ) & & inherit ;
2009-10-27 00:23:19 +03:00
attr - > mmap = 1 ;
2009-06-07 19:31:52 +04:00
try_again :
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:02:48 +04:00
fd [ i ] [ counter ] = sys_perf_event_open ( attr , target_pid , cpu , group_fd , 0 ) ;
2009-06-07 19:31:52 +04:00
if ( fd [ i ] [ counter ] < 0 ) {
int err = errno ;
2009-11-08 19:01:06 +03:00
if ( err = = EPERM | | err = = EACCES )
2009-06-07 19:39:02 +04:00
die ( " No permission - are you root? \n " ) ;
2009-06-07 19:31:52 +04:00
/*
* If it ' s cycles then fall back to hrtimer
* based cpu - clock - tick sw counter , which
* is always available even if no PMU support :
*/
if ( attr - > type = = PERF_TYPE_HARDWARE
2009-06-11 16:06:28 +04:00
& & attr - > config = = PERF_COUNT_HW_CPU_CYCLES ) {
2009-06-07 19:31:52 +04:00
2009-06-07 19:39:02 +04:00
if ( verbose )
warning ( " ... trying to fall back to cpu-clock-ticks \n " ) ;
2009-06-07 19:31:52 +04:00
attr - > type = PERF_TYPE_SOFTWARE ;
2009-06-11 16:06:28 +04:00
attr - > config = PERF_COUNT_SW_CPU_CLOCK ;
2009-06-07 19:31:52 +04:00
goto try_again ;
}
2009-06-07 19:46:24 +04:00
printf ( " \n " ) ;
error ( " perfcounter syscall returned with %d (%s) \n " ,
fd [ i ] [ counter ] , strerror ( err ) ) ;
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:02:48 +04:00
die ( " No CONFIG_PERF_EVENTS=y kernel support configured? \n " ) ;
2009-06-07 19:31:52 +04:00
exit ( - 1 ) ;
}
assert ( fd [ i ] [ counter ] > = 0 ) ;
fcntl ( fd [ i ] [ counter ] , F_SETFL , O_NONBLOCK ) ;
/*
* First counter acts as the group leader :
*/
if ( group & & group_fd = = - 1 )
group_fd = fd [ i ] [ counter ] ;
event_array [ nr_poll ] . fd = fd [ i ] [ counter ] ;
event_array [ nr_poll ] . events = POLLIN ;
nr_poll + + ;
mmap_array [ i ] [ counter ] . counter = counter ;
mmap_array [ i ] [ counter ] . prev = 0 ;
mmap_array [ i ] [ counter ] . mask = mmap_pages * page_size - 1 ;
mmap_array [ i ] [ counter ] . base = mmap ( NULL , ( mmap_pages + 1 ) * page_size ,
PROT_READ , MAP_SHARED , fd [ i ] [ counter ] , 0 ) ;
if ( mmap_array [ i ] [ counter ] . base = = MAP_FAILED )
die ( " failed to mmap with %d (%s) \n " , errno , strerror ( errno ) ) ;
}
static int __cmd_top ( void )
{
pthread_t thread ;
int i , counter ;
2009-04-20 17:00:56 +04:00
int ret ;
2009-12-14 00:50:24 +03:00
/*
2009-12-14 00:50:28 +03:00
* FIXME : perf_session__new should allow passing a O_MMAP , so that all this
* mmap reading , etc is encapsulated in it . Use O_WRONLY for now .
2009-12-14 00:50:24 +03:00
*/
2009-12-16 01:04:39 +03:00
struct perf_session * session = perf_session__new ( NULL , O_WRONLY , false ) ;
2009-12-14 00:50:28 +03:00
if ( session = = NULL )
return - ENOMEM ;
2009-04-20 17:00:56 +04:00
2009-10-27 00:23:19 +03:00
if ( target_pid ! = - 1 )
2009-12-14 00:50:24 +03:00
event__synthesize_thread ( target_pid , event__process , session ) ;
2009-10-27 00:23:19 +03:00
else
2009-12-14 00:50:24 +03:00
event__synthesize_threads ( event__process , session ) ;
2009-10-27 00:23:19 +03:00
2009-04-20 17:00:56 +04:00
for ( i = 0 ; i < nr_cpus ; i + + ) {
group_fd = - 1 ;
2009-06-07 19:31:52 +04:00
for ( counter = 0 ; counter < nr_counters ; counter + + )
start_counter ( i , counter ) ;
2009-04-20 17:00:56 +04:00
}
2009-06-07 01:10:43 +04:00
/* Wait for a minimal set of events before starting the snapshot */
poll ( event_array , nr_poll , 100 ) ;
2009-12-14 00:50:24 +03:00
perf_session__mmap_read ( session ) ;
2009-06-07 01:10:43 +04:00
2009-04-20 17:00:56 +04:00
if ( pthread_create ( & thread , NULL , display_thread , NULL ) ) {
printf ( " Could not create display thread. \n " ) ;
exit ( - 1 ) ;
}
if ( realtime_prio ) {
struct sched_param param ;
param . sched_priority = realtime_prio ;
if ( sched_setscheduler ( 0 , SCHED_FIFO , & param ) ) {
printf ( " Could not set realtime priority. \n " ) ;
exit ( - 1 ) ;
}
}
while ( 1 ) {
2009-06-05 16:29:10 +04:00
int hits = samples ;
2009-04-20 17:00:56 +04:00
2009-12-14 00:50:24 +03:00
perf_session__mmap_read ( session ) ;
2009-04-20 17:00:56 +04:00
2009-06-05 16:29:10 +04:00
if ( hits = = samples )
2009-04-20 17:00:56 +04:00
ret = poll ( event_array , nr_poll , 100 ) ;
}
return 0 ;
}
2009-05-26 11:17:18 +04:00
static const char * const top_usage [ ] = {
" perf top [<options>] " ,
NULL
} ;
static const struct option options [ ] = {
OPT_CALLBACK ( ' e ' , " event " , NULL , " event " ,
2009-06-06 14:24:17 +04:00
" event selector. use 'perf list' to list available events " ,
parse_events ) ,
2009-05-26 11:17:18 +04:00
OPT_INTEGER ( ' c ' , " count " , & default_interval ,
" event period to sample " ) ,
OPT_INTEGER ( ' p ' , " pid " , & target_pid ,
" profile events on existing pid " ) ,
OPT_BOOLEAN ( ' a ' , " all-cpus " , & system_wide ,
" system-wide collection from all CPUs " ) ,
OPT_INTEGER ( ' C ' , " CPU " , & profile_cpu ,
" CPU to profile on " ) ,
2009-11-24 17:05:15 +03:00
OPT_STRING ( ' k ' , " vmlinux " , & symbol_conf . vmlinux_name ,
" file " , " vmlinux pathname " ) ,
2009-11-17 02:45:24 +03:00
OPT_BOOLEAN ( ' K ' , " hide_kernel_symbols " , & hide_kernel_symbols ,
" hide kernel symbols " ) ,
2009-05-26 11:17:18 +04:00
OPT_INTEGER ( ' m ' , " mmap-pages " , & mmap_pages ,
" number of mmap data pages " ) ,
OPT_INTEGER ( ' r ' , " realtime " , & realtime_prio ,
" collect data with this RT SCHED_FIFO priority " ) ,
2009-05-26 17:25:34 +04:00
OPT_INTEGER ( ' d ' , " delay " , & delay_secs ,
2009-05-26 11:17:18 +04:00
" number of seconds to delay between refreshes " ) ,
OPT_BOOLEAN ( ' D ' , " dump-symtab " , & dump_symtab ,
" dump the symbol table used for profiling " ) ,
2009-06-04 10:53:05 +04:00
OPT_INTEGER ( ' f ' , " count-filter " , & count_filter ,
2009-05-26 11:17:18 +04:00
" only display functions with more events than this " ) ,
OPT_BOOLEAN ( ' g ' , " group " , & group ,
" put the counters into a counter group " ) ,
2009-07-21 12:30:36 +04:00
OPT_BOOLEAN ( ' i ' , " inherit " , & inherit ,
" child tasks inherit counters " ) ,
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form
perf top used to have annotation support, but it has bitrotted and
removed.
This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.
known keys:
[d] select display delay.
[e] select display entries (lines).
[E] select annotation event counter.
[f] select normal display count filter.
[F] select annotation display count filter (percentage).
[qQ] quit.
[s] select annotation symbol and start annotation.
[S] stop annotation, revert to normal display.
[z] toggle event count zeroing.
Sample:
------------------------------------------------------------------------------
PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing cache-misses for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% /* adjust length to remove Ethernet CRC */
0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
0 0.0% length -= 4;
436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12)
0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Available events:
0 cache-misses
1 cache-references
2 instructions
3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs)
------------------------------------------------------------------------------
Showing instructions for e1000_clean_rx_irq
Events Pcnt (>=3%)
0 0.0% int *work_done, int work_to_do)
0 0.0% {
175 0.9% eebf: 55 push %rbp
1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp
0 0.0%
0 0.0% i = rx_ring->next_to_clean;
140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax
670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp)
0 0.0% {
0 0.0% memcpy(skb->data + offset, from, len);
91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi
1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi
42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx
14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi
0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi
1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi)
0 0.0%
0 0.0% /* return some buffers to hardware, one at a time is too slow */
0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp)
0 0.0%
0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) {
37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15)
4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 22:36:03 +04:00
OPT_STRING ( ' s ' , " sym-annotate " , & sym_filter , " symbol name " ,
2010-02-03 21:52:08 +03:00
" symbol to annotate " ) ,
2009-07-01 03:00:44 +04:00
OPT_BOOLEAN ( ' z ' , " zero " , & zero ,
2009-05-26 11:17:18 +04:00
" zero history across updates " ) ,
2009-06-04 10:53:05 +04:00
OPT_INTEGER ( ' F ' , " freq " , & freq ,
2009-05-26 11:17:18 +04:00
" profile at this frequency " ) ,
2009-06-04 10:53:05 +04:00
OPT_INTEGER ( ' E ' , " entries " , & print_entries ,
" display this many functions " ) ,
2009-11-17 02:45:24 +03:00
OPT_BOOLEAN ( ' U ' , " hide_user_symbols " , & hide_user_symbols ,
" hide user symbols " ) ,
2009-06-07 19:39:02 +04:00
OPT_BOOLEAN ( ' v ' , " verbose " , & verbose ,
" be more verbose (show counter open errors, etc) " ) ,
2009-05-26 11:17:18 +04:00
OPT_END ( )
} ;
2009-07-01 14:37:06 +04:00
int cmd_top ( int argc , const char * * argv , const char * prefix __used )
2009-05-26 11:17:18 +04:00
{
2009-11-24 17:05:15 +03:00
int counter ;
2009-05-26 11:17:18 +04:00
page_size = sysconf ( _SC_PAGE_SIZE ) ;
argc = parse_options ( argc , argv , options , top_usage , 0 ) ;
if ( argc )
usage_with_options ( top_usage , options ) ;
/* CPU and PID are mutually exclusive */
if ( target_pid ! = - 1 & & profile_cpu ! = - 1 ) {
printf ( " WARNING: PID switch overriding CPU \n " ) ;
sleep ( 1 ) ;
profile_cpu = - 1 ;
}
2009-06-06 11:58:57 +04:00
if ( ! nr_counters )
2009-05-26 11:17:18 +04:00
nr_counters = 1 ;
2009-11-24 17:05:15 +03:00
symbol_conf . priv_size = ( sizeof ( struct sym_entry ) +
( nr_counters + 1 ) * sizeof ( unsigned long ) ) ;
2010-02-03 21:52:08 +03:00
symbol_conf . try_vmlinux_path = ( symbol_conf . vmlinux_name = = NULL ) ;
2009-12-16 01:04:39 +03:00
if ( symbol__init ( ) < 0 )
2009-11-24 17:05:15 +03:00
return - 1 ;
2009-11-17 23:38:01 +03:00
2009-06-05 21:31:01 +04:00
if ( delay_secs < 1 )
delay_secs = 1 ;
2009-10-12 09:56:03 +04:00
/*
* User specified count overrides default frequency .
*/
if ( default_interval )
freq = 0 ;
else if ( freq ) {
default_interval = freq ;
} else {
fprintf ( stderr , " frequency and count are zero, aborting \n " ) ;
exit ( EXIT_FAILURE ) ;
}
2009-06-06 11:58:57 +04:00
/*
* Fill in the ones not specifically initialized via - c :
*/
2009-05-26 11:17:18 +04:00
for ( counter = 0 ; counter < nr_counters ; counter + + ) {
2009-06-06 11:58:57 +04:00
if ( attrs [ counter ] . sample_period )
2009-05-26 11:17:18 +04:00
continue ;
2009-06-06 11:58:57 +04:00
attrs [ counter ] . sample_period = default_interval ;
2009-05-26 11:17:18 +04:00
}
if ( target_pid ! = - 1 | | profile_cpu ! = - 1 )
nr_cpus = 1 ;
perf tools: Fix sparse CPU numbering related bugs
At present, the perf subcommands that do system-wide monitoring
(perf stat, perf record and perf top) don't work properly unless
the online cpus are numbered 0, 1, ..., N-1. These tools ask
for the number of online cpus with sysconf(_SC_NPROCESSORS_ONLN)
and then try to create events for cpus 0, 1, ..., N-1.
This creates problems for systems where the online cpus are
numbered sparsely. For example, a POWER6 system in
single-threaded mode (i.e. only running 1 hardware thread per
core) will have only even-numbered cpus online.
This fixes the problem by reading the /sys/devices/system/cpu/online
file to find out which cpus are online. The code that does that is in
tools/perf/util/cpumap.[ch], and consists of a read_cpu_map()
function that sets up a cpumap[] array and returns the number of
online cpus. If /sys/devices/system/cpu/online can't be read or
can't be parsed successfully, it falls back to using sysconf to
ask how many cpus are online and sets up an identity map in cpumap[].
The perf record, perf stat and perf top code then calls
read_cpu_map() in the system-wide monitoring case (instead of
sysconf) and uses cpumap[] to get the cpu numbers to pass to
perf_event_open.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <20100310093609.GA3959@brick.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10 12:36:09 +03:00
else
nr_cpus = read_cpu_map ( ) ;
2009-05-26 11:17:18 +04:00
2009-11-17 20:40:54 +03:00
get_term_dimensions ( & winsize ) ;
2009-11-17 00:30:27 +03:00
if ( print_entries = = 0 ) {
2009-11-17 20:40:54 +03:00
update_print_entries ( & winsize ) ;
2009-11-17 00:30:27 +03:00
signal ( SIGWINCH , sig_winch_handler ) ;
}
2009-05-26 11:17:18 +04:00
return __cmd_top ( ) ;
}