iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
bf4c94490a
linux/arch/arm/mach-omap2/mux34xx.c

2062 lines
78 KiB
C
Raw Normal View History

omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
/*
* Copyright (C) 2009 Nokia
* Copyright (C) 2009 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include "mux.h"
#ifdef CONFIG_OMAP_MUX
#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \
{ \
.reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \
.gpio = (g), \
.muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \
}
#else
#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \
{ \
.reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \
.gpio = (g), \
}
#endif
#define _OMAP3_BALLENTRY(M0, bb, bt) \
{ \
.reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \
.balls = { bb, bt }, \
}
/*
* Superset of all mux modes for omap3
*/
static struct omap_mux __initdata omap3_muxmodes[] = {
_OMAP3_MUXENTRY(CAM_D0, 99,
"cam_d0", NULL, NULL, NULL,
"gpio_99", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D1, 100,
"cam_d1", NULL, NULL, NULL,
"gpio_100", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D10, 109,
"cam_d10", NULL, NULL, NULL,
"gpio_109", "hw_dbg8", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D11, 110,
"cam_d11", NULL, NULL, NULL,
"gpio_110", "hw_dbg9", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D2, 101,
"cam_d2", NULL, NULL, NULL,
"gpio_101", "hw_dbg4", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D3, 102,
"cam_d3", NULL, NULL, NULL,
"gpio_102", "hw_dbg5", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D4, 103,
"cam_d4", NULL, NULL, NULL,
"gpio_103", "hw_dbg6", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D5, 104,
"cam_d5", NULL, NULL, NULL,
"gpio_104", "hw_dbg7", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D6, 105,
"cam_d6", NULL, NULL, NULL,
"gpio_105", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D7, 106,
"cam_d7", NULL, NULL, NULL,
"gpio_106", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D8, 107,
"cam_d8", NULL, NULL, NULL,
"gpio_107", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D9, 108,
"cam_d9", NULL, NULL, NULL,
"gpio_108", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_FLD, 98,
"cam_fld", NULL, "cam_global_reset", NULL,
"gpio_98", "hw_dbg3", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_HS, 94,
"cam_hs", NULL, NULL, NULL,
"gpio_94", "hw_dbg0", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_PCLK, 97,
"cam_pclk", NULL, NULL, NULL,
"gpio_97", "hw_dbg2", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_STROBE, 126,
"cam_strobe", NULL, NULL, NULL,
"gpio_126", "hw_dbg11", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_VS, 95,
"cam_vs", NULL, NULL, NULL,
"gpio_95", "hw_dbg1", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_WEN, 167,
"cam_wen", NULL, "cam_shutter", NULL,
"gpio_167", "hw_dbg10", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_XCLKA, 96,
"cam_xclka", NULL, NULL, NULL,
"gpio_96", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_XCLKB, 111,
"cam_xclkb", NULL, NULL, NULL,
"gpio_111", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CSI2_DX0, 112,
"csi2_dx0", NULL, NULL, NULL,
"gpio_112", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CSI2_DX1, 114,
"csi2_dx1", NULL, NULL, NULL,
"gpio_114", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CSI2_DY0, 113,
"csi2_dy0", NULL, NULL, NULL,
"gpio_113", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CSI2_DY1, 115,
"csi2_dy1", NULL, NULL, NULL,
"gpio_115", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_ACBIAS, 69,
"dss_acbias", NULL, NULL, NULL,
"gpio_69", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA0, 70,
"dss_data0", NULL, "uart1_cts", NULL,
"gpio_70", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA1, 71,
"dss_data1", NULL, "uart1_rts", NULL,
"gpio_71", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA10, 80,
"dss_data10", NULL, NULL, NULL,
"gpio_80", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA11, 81,
"dss_data11", NULL, NULL, NULL,
"gpio_81", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA12, 82,
"dss_data12", NULL, NULL, NULL,
"gpio_82", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA13, 83,
"dss_data13", NULL, NULL, NULL,
"gpio_83", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA14, 84,
"dss_data14", NULL, NULL, NULL,
"gpio_84", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA15, 85,
"dss_data15", NULL, NULL, NULL,
"gpio_85", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA16, 86,
"dss_data16", NULL, NULL, NULL,
"gpio_86", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA17, 87,
"dss_data17", NULL, NULL, NULL,
"gpio_87", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA18, 88,
"dss_data18", NULL, "mcspi3_clk", "dss_data0",
"gpio_88", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA19, 89,
"dss_data19", NULL, "mcspi3_simo", "dss_data1",
"gpio_89", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA20, 90,
"dss_data20", NULL, "mcspi3_somi", "dss_data2",
"gpio_90", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA21, 91,
"dss_data21", NULL, "mcspi3_cs0", "dss_data3",
"gpio_91", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA22, 92,
"dss_data22", NULL, "mcspi3_cs1", "dss_data4",
"gpio_92", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA23, 93,
"dss_data23", NULL, NULL, "dss_data5",
"gpio_93", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA2, 72,
"dss_data2", NULL, NULL, NULL,
"gpio_72", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA3, 73,
"dss_data3", NULL, NULL, NULL,
"gpio_73", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA4, 74,
"dss_data4", NULL, "uart3_rx_irrx", NULL,
"gpio_74", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA5, 75,
"dss_data5", NULL, "uart3_tx_irtx", NULL,
"gpio_75", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA6, 76,
"dss_data6", NULL, "uart1_tx", NULL,
"gpio_76", "hw_dbg14", NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA7, 77,
"dss_data7", NULL, "uart1_rx", NULL,
"gpio_77", "hw_dbg15", NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA8, 78,
"dss_data8", NULL, NULL, NULL,
"gpio_78", "hw_dbg16", NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA9, 79,
"dss_data9", NULL, NULL, NULL,
"gpio_79", "hw_dbg17", NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_HSYNC, 67,
"dss_hsync", NULL, NULL, NULL,
"gpio_67", "hw_dbg13", NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_PCLK, 66,
"dss_pclk", NULL, NULL, NULL,
"gpio_66", "hw_dbg12", NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_VSYNC, 68,
"dss_vsync", NULL, NULL, NULL,
"gpio_68", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(ETK_CLK, 12,
"etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
"gpio_12", "mm1_rxdp", "hsusb1_tll_stp", "hw_dbg0"),
_OMAP3_MUXENTRY(ETK_CTL, 13,
"etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
"gpio_13", NULL, "hsusb1_tll_clk", "hw_dbg1"),
_OMAP3_MUXENTRY(ETK_D0, 14,
"etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
"gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", "hw_dbg2"),
_OMAP3_MUXENTRY(ETK_D1, 15,
"etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
"gpio_15", "mm1_txse0", "hsusb1_tll_data1", "hw_dbg3"),
_OMAP3_MUXENTRY(ETK_D10, 24,
"etk_d10", NULL, "uart1_rx", "hsusb2_clk",
"gpio_24", NULL, "hsusb2_tll_clk", "hw_dbg12"),
_OMAP3_MUXENTRY(ETK_D11, 25,
"etk_d11", NULL, NULL, "hsusb2_stp",
"gpio_25", "mm2_rxdp", "hsusb2_tll_stp", "hw_dbg13"),
_OMAP3_MUXENTRY(ETK_D12, 26,
"etk_d12", NULL, NULL, "hsusb2_dir",
"gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"),
_OMAP3_MUXENTRY(ETK_D13, 27,
"etk_d13", NULL, NULL, "hsusb2_nxt",
"gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", "hw_dbg15"),
_OMAP3_MUXENTRY(ETK_D14, 28,
"etk_d14", NULL, NULL, "hsusb2_data0",
"gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", "hw_dbg16"),
_OMAP3_MUXENTRY(ETK_D15, 29,
"etk_d15", NULL, NULL, "hsusb2_data1",
"gpio_29", "mm2_txse0", "hsusb2_tll_data1", "hw_dbg17"),
_OMAP3_MUXENTRY(ETK_D2, 16,
"etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
"gpio_16", "mm1_txdat", "hsusb1_tll_data2", "hw_dbg4"),
_OMAP3_MUXENTRY(ETK_D3, 17,
"etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
"gpio_17", NULL, "hsusb1_tll_data7", "hw_dbg5"),
_OMAP3_MUXENTRY(ETK_D4, 18,
"etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
"gpio_18", NULL, "hsusb1_tll_data4", "hw_dbg6"),
_OMAP3_MUXENTRY(ETK_D5, 19,
"etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
"gpio_19", NULL, "hsusb1_tll_data5", "hw_dbg7"),
_OMAP3_MUXENTRY(ETK_D6, 20,
"etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
"gpio_20", NULL, "hsusb1_tll_data6", "hw_dbg8"),
_OMAP3_MUXENTRY(ETK_D7, 21,
"etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
"gpio_21", "mm1_txen_n", "hsusb1_tll_data3", "hw_dbg9"),
_OMAP3_MUXENTRY(ETK_D8, 22,
"etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
"gpio_22", NULL, "hsusb1_tll_dir", "hw_dbg10"),
_OMAP3_MUXENTRY(ETK_D9, 23,
"etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
"gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", "hw_dbg11"),
_OMAP3_MUXENTRY(GPMC_A1, 34,
"gpmc_a1", NULL, NULL, NULL,
"gpio_34", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_A10, 43,
"gpmc_a10", "sys_ndmareq3", NULL, NULL,
"gpio_43", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_A2, 35,
"gpmc_a2", NULL, NULL, NULL,
"gpio_35", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_A3, 36,
"gpmc_a3", NULL, NULL, NULL,
"gpio_36", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_A4, 37,
"gpmc_a4", NULL, NULL, NULL,
"gpio_37", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_A5, 38,
"gpmc_a5", NULL, NULL, NULL,
"gpio_38", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_A6, 39,
"gpmc_a6", NULL, NULL, NULL,
"gpio_39", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_A7, 40,
"gpmc_a7", NULL, NULL, NULL,
"gpio_40", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_A8, 41,
"gpmc_a8", NULL, NULL, NULL,
"gpio_41", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_A9, 42,
"gpmc_a9", "sys_ndmareq2", NULL, NULL,
"gpio_42", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_CLK, 59,
"gpmc_clk", NULL, NULL, NULL,
"gpio_59", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_D10, 46,
"gpmc_d10", NULL, NULL, NULL,
"gpio_46", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_D11, 47,
"gpmc_d11", NULL, NULL, NULL,
"gpio_47", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_D12, 48,
"gpmc_d12", NULL, NULL, NULL,
"gpio_48", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_D13, 49,
"gpmc_d13", NULL, NULL, NULL,
"gpio_49", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_D14, 50,
"gpmc_d14", NULL, NULL, NULL,
"gpio_50", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_D15, 51,
"gpmc_d15", NULL, NULL, NULL,
"gpio_51", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_D8, 44,
"gpmc_d8", NULL, NULL, NULL,
"gpio_44", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_D9, 45,
"gpmc_d9", NULL, NULL, NULL,
"gpio_45", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_NBE0_CLE, 60,
"gpmc_nbe0_cle", NULL, NULL, NULL,
"gpio_60", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_NBE1, 61,
"gpmc_nbe1", NULL, NULL, NULL,
"gpio_61", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_NCS1, 52,
"gpmc_ncs1", NULL, NULL, NULL,
"gpio_52", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_NCS2, 53,
"gpmc_ncs2", NULL, NULL, NULL,
"gpio_53", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_NCS3, 54,
"gpmc_ncs3", "sys_ndmareq0", NULL, NULL,
"gpio_54", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_NCS4, 55,
"gpmc_ncs4", "sys_ndmareq1", "mcbsp4_clkx", "gpt9_pwm_evt",
"gpio_55", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_NCS5, 56,
"gpmc_ncs5", "sys_ndmareq2", "mcbsp4_dr", "gpt10_pwm_evt",
"gpio_56", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_NCS6, 57,
"gpmc_ncs6", "sys_ndmareq3", "mcbsp4_dx", "gpt11_pwm_evt",
"gpio_57", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_NCS7, 58,
"gpmc_ncs7", "gpmc_io_dir", "mcbsp4_fsx", "gpt8_pwm_evt",
"gpio_58", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_NWP, 62,
"gpmc_nwp", NULL, NULL, NULL,
"gpio_62", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_WAIT1, 63,
"gpmc_wait1", NULL, NULL, NULL,
"gpio_63", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_WAIT2, 64,
"gpmc_wait2", NULL, NULL, NULL,
"gpio_64", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_WAIT3, 65,
"gpmc_wait3", "sys_ndmareq1", NULL, NULL,
"gpio_65", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(HDQ_SIO, 170,
"hdq_sio", "sys_altclk", "i2c2_sccbe", "i2c3_sccbe",
"gpio_170", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_CLK, 120,
"hsusb0_clk", NULL, NULL, NULL,
"gpio_120", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_DATA0, 125,
"hsusb0_data0", NULL, "uart3_tx_irtx", NULL,
"gpio_125", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_DATA1, 130,
"hsusb0_data1", NULL, "uart3_rx_irrx", NULL,
"gpio_130", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_DATA2, 131,
"hsusb0_data2", NULL, "uart3_rts_sd", NULL,
"gpio_131", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_DATA3, 169,
"hsusb0_data3", NULL, "uart3_cts_rctx", NULL,
"gpio_169", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_DATA4, 188,
"hsusb0_data4", NULL, NULL, NULL,
"gpio_188", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_DATA5, 189,
"hsusb0_data5", NULL, NULL, NULL,
"gpio_189", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_DATA6, 190,
"hsusb0_data6", NULL, NULL, NULL,
"gpio_190", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_DATA7, 191,
"hsusb0_data7", NULL, NULL, NULL,
"gpio_191", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_DIR, 122,
"hsusb0_dir", NULL, NULL, NULL,
"gpio_122", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_NXT, 124,
"hsusb0_nxt", NULL, NULL, NULL,
"gpio_124", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_STP, 121,
"hsusb0_stp", NULL, NULL, NULL,
"gpio_121", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(I2C2_SCL, 168,
"i2c2_scl", NULL, NULL, NULL,
"gpio_168", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(I2C2_SDA, 183,
"i2c2_sda", NULL, NULL, NULL,
"gpio_183", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(I2C3_SCL, 184,
"i2c3_scl", NULL, NULL, NULL,
"gpio_184", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(I2C3_SDA, 185,
"i2c3_sda", NULL, NULL, NULL,
"gpio_185", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(I2C4_SCL, 0,
"i2c4_scl", "sys_nvmode1", NULL, NULL,
NULL, NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(I2C4_SDA, 0,
"i2c4_sda", "sys_nvmode2", NULL, NULL,
NULL, NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(JTAG_EMU0, 11,
"jtag_emu0", NULL, NULL, NULL,
"gpio_11", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(JTAG_EMU1, 31,
"jtag_emu1", NULL, NULL, NULL,
"gpio_31", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP1_CLKR, 156,
"mcbsp1_clkr", "mcspi4_clk", NULL, NULL,
"gpio_156", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP1_CLKX, 162,
"mcbsp1_clkx", NULL, "mcbsp3_clkx", NULL,
"gpio_162", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP1_DR, 159,
"mcbsp1_dr", "mcspi4_somi", "mcbsp3_dr", NULL,
"gpio_159", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP1_DX, 158,
"mcbsp1_dx", "mcspi4_simo", "mcbsp3_dx", NULL,
"gpio_158", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP1_FSR, 157,
"mcbsp1_fsr", NULL, "cam_global_reset", NULL,
"gpio_157", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP1_FSX, 161,
"mcbsp1_fsx", "mcspi4_cs0", "mcbsp3_fsx", NULL,
"gpio_161", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP2_CLKX, 117,
"mcbsp2_clkx", NULL, NULL, NULL,
"gpio_117", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP2_DR, 118,
"mcbsp2_dr", NULL, NULL, NULL,
"gpio_118", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP2_DX, 119,
"mcbsp2_dx", NULL, NULL, NULL,
"gpio_119", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP2_FSX, 116,
"mcbsp2_fsx", NULL, NULL, NULL,
"gpio_116", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP3_CLKX, 142,
"mcbsp3_clkx", "uart2_tx", NULL, NULL,
"gpio_142", "hsusb3_tll_data6", NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP3_DR, 141,
"mcbsp3_dr", "uart2_rts", NULL, NULL,
"gpio_141", "hsusb3_tll_data5", NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP3_DX, 140,
"mcbsp3_dx", "uart2_cts", NULL, NULL,
"gpio_140", "hsusb3_tll_data4", NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP3_FSX, 143,
"mcbsp3_fsx", "uart2_rx", NULL, NULL,
"gpio_143", "hsusb3_tll_data7", NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP4_CLKX, 152,
"mcbsp4_clkx", NULL, NULL, NULL,
"gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"),
_OMAP3_MUXENTRY(MCBSP4_DR, 153,
"mcbsp4_dr", NULL, NULL, NULL,
"gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"),
_OMAP3_MUXENTRY(MCBSP4_DX, 154,
"mcbsp4_dx", NULL, NULL, NULL,
"gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"),
_OMAP3_MUXENTRY(MCBSP4_FSX, 155,
"mcbsp4_fsx", NULL, NULL, NULL,
"gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"),
_OMAP3_MUXENTRY(MCBSP_CLKS, 160,
"mcbsp_clks", NULL, "cam_shutter", NULL,
"gpio_160", "uart1_cts", NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCSPI1_CLK, 171,
"mcspi1_clk", "sdmmc2_dat4", NULL, NULL,
"gpio_171", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCSPI1_CS0, 174,
"mcspi1_cs0", "sdmmc2_dat7", NULL, NULL,
"gpio_174", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCSPI1_CS1, 175,
"mcspi1_cs1", NULL, NULL, "sdmmc3_cmd",
"gpio_175", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCSPI1_CS2, 176,
"mcspi1_cs2", NULL, NULL, "sdmmc3_clk",
"gpio_176", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCSPI1_CS3, 177,
"mcspi1_cs3", NULL, "hsusb2_tll_data2", "hsusb2_data2",
"gpio_177", "mm2_txdat", NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCSPI1_SIMO, 172,
"mcspi1_simo", "sdmmc2_dat5", NULL, NULL,
"gpio_172", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCSPI1_SOMI, 173,
"mcspi1_somi", "sdmmc2_dat6", NULL, NULL,
"gpio_173", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCSPI2_CLK, 178,
"mcspi2_clk", NULL, "hsusb2_tll_data7", "hsusb2_data7",
"gpio_178", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCSPI2_CS0, 181,
"mcspi2_cs0", "gpt11_pwm_evt",
"hsusb2_tll_data6", "hsusb2_data6",
"gpio_181", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCSPI2_CS1, 182,
"mcspi2_cs1", "gpt8_pwm_evt",
"hsusb2_tll_data3", "hsusb2_data3",
"gpio_182", "mm2_txen_n", NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCSPI2_SIMO, 179,
"mcspi2_simo", "gpt9_pwm_evt",
"hsusb2_tll_data4", "hsusb2_data4",
"gpio_179", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCSPI2_SOMI, 180,
"mcspi2_somi", "gpt10_pwm_evt",
"hsusb2_tll_data5", "hsusb2_data5",
"gpio_180", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC1_CLK, 120,
"sdmmc1_clk", NULL, NULL, NULL,
"gpio_120", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC1_CMD, 121,
"sdmmc1_cmd", NULL, NULL, NULL,
"gpio_121", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC1_DAT0, 122,
"sdmmc1_dat0", NULL, NULL, NULL,
"gpio_122", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC1_DAT1, 123,
"sdmmc1_dat1", NULL, NULL, NULL,
"gpio_123", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC1_DAT2, 124,
"sdmmc1_dat2", NULL, NULL, NULL,
"gpio_124", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC1_DAT3, 125,
"sdmmc1_dat3", NULL, NULL, NULL,
"gpio_125", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC1_DAT4, 126,
"sdmmc1_dat4", NULL, "sim_io", NULL,
"gpio_126", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC1_DAT5, 127,
"sdmmc1_dat5", NULL, "sim_clk", NULL,
"gpio_127", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC1_DAT6, 128,
"sdmmc1_dat6", NULL, "sim_pwrctrl", NULL,
"gpio_128", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC1_DAT7, 129,
"sdmmc1_dat7", NULL, "sim_rst", NULL,
"gpio_129", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC2_CLK, 130,
"sdmmc2_clk", "mcspi3_clk", NULL, NULL,
"gpio_130", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC2_CMD, 131,
"sdmmc2_cmd", "mcspi3_simo", NULL, NULL,
"gpio_131", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC2_DAT0, 132,
"sdmmc2_dat0", "mcspi3_somi", NULL, NULL,
"gpio_132", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC2_DAT1, 133,
"sdmmc2_dat1", NULL, NULL, NULL,
"gpio_133", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC2_DAT2, 134,
"sdmmc2_dat2", "mcspi3_cs1", NULL, NULL,
"gpio_134", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC2_DAT3, 135,
"sdmmc2_dat3", "mcspi3_cs0", NULL, NULL,
"gpio_135", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC2_DAT4, 136,
"sdmmc2_dat4", "sdmmc2_dir_dat0", NULL, "sdmmc3_dat0",
"gpio_136", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC2_DAT5, 137,
"sdmmc2_dat5", "sdmmc2_dir_dat1",
"cam_global_reset", "sdmmc3_dat1",
"gpio_137", "hsusb3_tll_stp", "mm3_rxdp", "safe_mode"),
_OMAP3_MUXENTRY(SDMMC2_DAT6, 138,
"sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2",
"gpio_138", "hsusb3_tll_dir", NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC2_DAT7, 139,
"sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3",
"gpio_139", "hsusb3_tll_nxt", "mm3_rxdm", "safe_mode"),
_OMAP3_MUXENTRY(SDRC_CKE0, 0,
"sdrc_cke0", NULL, NULL, NULL,
NULL, NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDRC_CKE1, 0,
"sdrc_cke1", NULL, NULL, NULL,
NULL, NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_BOOT0, 2,
"sys_boot0", NULL, NULL, NULL,
"gpio_2", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_BOOT1, 3,
"sys_boot1", NULL, NULL, NULL,
"gpio_3", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_BOOT2, 4,
"sys_boot2", NULL, NULL, NULL,
"gpio_4", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_BOOT3, 5,
"sys_boot3", NULL, NULL, NULL,
"gpio_5", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_BOOT4, 6,
"sys_boot4", "sdmmc2_dir_dat2", NULL, NULL,
"gpio_6", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_BOOT5, 7,
"sys_boot5", "sdmmc2_dir_dat3", NULL, NULL,
"gpio_7", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_BOOT6, 8,
"sys_boot6", NULL, NULL, NULL,
"gpio_8", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_CLKOUT1, 10,
"sys_clkout1", NULL, NULL, NULL,
"gpio_10", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_CLKOUT2, 186,
"sys_clkout2", NULL, NULL, NULL,
"gpio_186", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_CLKREQ, 1,
"sys_clkreq", NULL, NULL, NULL,
"gpio_1", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_NIRQ, 0,
"sys_nirq", NULL, NULL, NULL,
"gpio_0", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_NRESWARM, 30,
"sys_nreswarm", NULL, NULL, NULL,
"gpio_30", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_OFF_MODE, 9,
"sys_off_mode", NULL, NULL, NULL,
"gpio_9", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_CTS, 150,
ARM: OMAP3: Fix 3430 legacy mux names for ssi1 signals. On n900 uart1 pins are not not used for uart, instead they are used to connect to a cell modem over ssi. Looks like we're currently missing these signal names for 3430 for some reason, and only have some of them listed for 3630. Obviously the signals are there for 3430 if n900 is using them and they are documented in some TRMs. Note that these will eventually be replaced by device tree based pinctrl-single.c driver. But for now these are needed to verify the SSI pins for devices like Nokia N900. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-23 00:30:03 +04:00
"uart1_cts", "ssi1_rdy_tx", NULL, NULL,
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
"gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_RTS, 149,
ARM: OMAP3: Fix 3430 legacy mux names for ssi1 signals. On n900 uart1 pins are not not used for uart, instead they are used to connect to a cell modem over ssi. Looks like we're currently missing these signal names for 3430 for some reason, and only have some of them listed for 3630. Obviously the signals are there for 3430 if n900 is using them and they are documented in some TRMs. Note that these will eventually be replaced by device tree based pinctrl-single.c driver. But for now these are needed to verify the SSI pins for devices like Nokia N900. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-23 00:30:03 +04:00
"uart1_rts", "ssi1_flag_tx", NULL, NULL,
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
"gpio_149", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_RX, 151,
ARM: OMAP2+: mux: fix trivial typo in name Fix trivial typo in name. Signed-off-by: Phil Carmody <phil.carmody@partner.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-09-18 23:02:01 +04:00
"uart1_rx", "ssi1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
"gpio_151", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_TX, 148,
ARM: OMAP3: Fix 3430 legacy mux names for ssi1 signals. On n900 uart1 pins are not not used for uart, instead they are used to connect to a cell modem over ssi. Looks like we're currently missing these signal names for 3430 for some reason, and only have some of them listed for 3630. Obviously the signals are there for 3430 if n900 is using them and they are documented in some TRMs. Note that these will eventually be replaced by device tree based pinctrl-single.c driver. But for now these are needed to verify the SSI pins for devices like Nokia N900. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-23 00:30:03 +04:00
"uart1_tx", "ssi1_dat_tx", NULL, NULL,
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
"gpio_148", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART2_CTS, 144,
"uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL,
"gpio_144", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART2_RTS, 145,
"uart2_rts", "mcbsp3_dr", "gpt10_pwm_evt", NULL,
"gpio_145", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART2_RX, 147,
"uart2_rx", "mcbsp3_fsx", "gpt8_pwm_evt", NULL,
"gpio_147", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART2_TX, 146,
"uart2_tx", "mcbsp3_clkx", "gpt11_pwm_evt", NULL,
"gpio_146", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART3_CTS_RCTX, 163,
"uart3_cts_rctx", NULL, NULL, NULL,
"gpio_163", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART3_RTS_SD, 164,
"uart3_rts_sd", NULL, NULL, NULL,
"gpio_164", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART3_RX_IRRX, 165,
"uart3_rx_irrx", NULL, NULL, NULL,
"gpio_165", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
"uart3_tx_irtx", NULL, NULL, NULL,
"gpio_166", NULL, NULL, "safe_mode"),
omap: Fix 3630 mux errors 3630 has more mux signals than 34xx. The additional pins exist in omap36xx_cbp_subset, but are not initialized as the superset is missing these offsets. This causes the following errors during the boot: mux: Unknown entry offset 0x236 mux: Unknown entry offset 0x22e mux: Unknown entry offset 0x1ec mux: Unknown entry offset 0x1ee mux: Unknown entry offset 0x1f4 mux: Unknown entry offset 0x1f6 mux: Unknown entry offset 0x1f8 mux: Unknown entry offset 0x1fa mux: Unknown entry offset 0x1fc mux: Unknown entry offset 0x22a mux: Unknown entry offset 0x226 mux: Unknown entry offset 0x230 mux: Unknown entry offset 0x22c mux: Unknown entry offset 0x228 Fix this by adding the missing offsets to omap3 superset. Note that additionally the uninitialized pins need to be skipped on 34xx. Based on an earlier patch by Allen Pais <allen.pais@ti.com>. Reported-by: Allen Pais <allen.pais@ti.com> Signed-off-by: Allen Pais <allen.pais@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-01 22:22:54 +03:00
/* Only on 3630, see omap36xx_cbp_subset for the signals */
_OMAP3_MUXENTRY(GPMC_A11, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MREAD, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_SREAD, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(GPMC_A11, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL),
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
/*
* Signals different on CBC package compared to the superset
*/
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC)
omap3|4: mux: make local structures static Mux data is passed by pointers to mux.c from the SoC specific mux file, these variables dont really need to be global scope. This fixes the following sparse warnings: arch/arm/mach-omap2/mux44xx.c:547:29: warning: symbol 'omap4_core_cbl_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux44xx.c:1265:29: warning: symbol 'omap4_core_cbs_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux44xx.c:1549:29: warning: symbol 'omap4_wkup_cbl_cbs_ball' was not declared. Should it be static? Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-07 06:49:28 +03:00
static struct omap_mux __initdata omap3_cbc_subset[] = {
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define omap3_cbc_subset NULL
#endif
/*
* Balls for CBC package
* 515-pin s-PBGA Package, 0.65mm Ball Pitch (Top), 0.50mm Ball Pitch (Bottom)
*
* FIXME: What's up with the outdated TI documentation? See:
*
* http://wiki.davincidsp.com/index.php/Datasheet_Errata_for_OMAP35x_CBC_Package
* http://community.ti.com/forums/t/10982.aspx
*/
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
&& defined(CONFIG_OMAP_PACKAGE_CBC)
omap3|4: mux: make local structures static Mux data is passed by pointers to mux.c from the SoC specific mux file, these variables dont really need to be global scope. This fixes the following sparse warnings: arch/arm/mach-omap2/mux44xx.c:547:29: warning: symbol 'omap4_core_cbl_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux44xx.c:1265:29: warning: symbol 'omap4_core_cbs_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux44xx.c:1549:29: warning: symbol 'omap4_wkup_cbl_cbs_ball' was not declared. Should it be static? Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-01-07 06:49:28 +03:00
static struct omap_ball __initdata omap3_cbc_ball[] = {
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
_OMAP3_BALLENTRY(CAM_D0, "ae16", NULL),
_OMAP3_BALLENTRY(CAM_D1, "ae15", NULL),
_OMAP3_BALLENTRY(CAM_D10, "d25", NULL),
_OMAP3_BALLENTRY(CAM_D11, "e26", NULL),
_OMAP3_BALLENTRY(CAM_D2, "a24", NULL),
_OMAP3_BALLENTRY(CAM_D3, "b24", NULL),
_OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
_OMAP3_BALLENTRY(CAM_D5, "c24", NULL),
_OMAP3_BALLENTRY(CAM_D6, "p25", NULL),
_OMAP3_BALLENTRY(CAM_D7, "p26", NULL),
_OMAP3_BALLENTRY(CAM_D8, "n25", NULL),
_OMAP3_BALLENTRY(CAM_D9, "n26", NULL),
_OMAP3_BALLENTRY(CAM_FLD, "b23", NULL),
_OMAP3_BALLENTRY(CAM_HS, "c23", NULL),
_OMAP3_BALLENTRY(CAM_PCLK, "c26", NULL),
_OMAP3_BALLENTRY(CAM_STROBE, "d26", NULL),
_OMAP3_BALLENTRY(CAM_VS, "d23", NULL),
_OMAP3_BALLENTRY(CAM_WEN, "a23", NULL),
_OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
_OMAP3_BALLENTRY(CAM_XCLKB, "e25", NULL),
_OMAP3_BALLENTRY(CSI2_DX0, "ad17", NULL),
_OMAP3_BALLENTRY(CSI2_DX1, "ae18", NULL),
_OMAP3_BALLENTRY(CSI2_DY0, "ad16", NULL),
_OMAP3_BALLENTRY(CSI2_DY1, "ae17", NULL),
_OMAP3_BALLENTRY(DSS_ACBIAS, "f26", NULL),
_OMAP3_BALLENTRY(DSS_DATA0, "ae21", NULL),
_OMAP3_BALLENTRY(DSS_DATA1, "ae22", NULL),
_OMAP3_BALLENTRY(DSS_DATA10, "ac26", NULL),
_OMAP3_BALLENTRY(DSS_DATA11, "ad26", NULL),
_OMAP3_BALLENTRY(DSS_DATA12, "aa25", NULL),
_OMAP3_BALLENTRY(DSS_DATA13, "y25", NULL),
_OMAP3_BALLENTRY(DSS_DATA14, "aa26", NULL),
_OMAP3_BALLENTRY(DSS_DATA15, "ab26", NULL),
_OMAP3_BALLENTRY(DSS_DATA16, "l25", NULL),
_OMAP3_BALLENTRY(DSS_DATA17, "l26", NULL),
_OMAP3_BALLENTRY(DSS_DATA18, "m24", NULL),
_OMAP3_BALLENTRY(DSS_DATA19, "m26", NULL),
_OMAP3_BALLENTRY(DSS_DATA2, "ae23", NULL),
_OMAP3_BALLENTRY(DSS_DATA20, "f25", NULL),
_OMAP3_BALLENTRY(DSS_DATA21, "n24", NULL),
_OMAP3_BALLENTRY(DSS_DATA22, "ac25", NULL),
_OMAP3_BALLENTRY(DSS_DATA23, "ab25", NULL),
_OMAP3_BALLENTRY(DSS_DATA3, "ae24", NULL),
_OMAP3_BALLENTRY(DSS_DATA4, "ad23", NULL),
_OMAP3_BALLENTRY(DSS_DATA5, "ad24", NULL),
_OMAP3_BALLENTRY(DSS_DATA6, "g26", NULL),
_OMAP3_BALLENTRY(DSS_DATA7, "h25", NULL),
_OMAP3_BALLENTRY(DSS_DATA8, "h26", NULL),
_OMAP3_BALLENTRY(DSS_DATA9, "j26", NULL),
_OMAP3_BALLENTRY(DSS_HSYNC, "k24", NULL),
_OMAP3_BALLENTRY(DSS_PCLK, "g25", NULL),
_OMAP3_BALLENTRY(DSS_VSYNC, "m25", NULL),
_OMAP3_BALLENTRY(ETK_CLK, "ab2", NULL),
_OMAP3_BALLENTRY(ETK_CTL, "ab3", NULL),
_OMAP3_BALLENTRY(ETK_D0, "ac3", NULL),
_OMAP3_BALLENTRY(ETK_D1, "ad4", NULL),
_OMAP3_BALLENTRY(ETK_D10, "ae4", NULL),
_OMAP3_BALLENTRY(ETK_D11, "af6", NULL),
_OMAP3_BALLENTRY(ETK_D12, "ae6", NULL),
_OMAP3_BALLENTRY(ETK_D13, "af7", NULL),
_OMAP3_BALLENTRY(ETK_D14, "af9", NULL),
_OMAP3_BALLENTRY(ETK_D15, "ae9", NULL),
_OMAP3_BALLENTRY(ETK_D2, "ad3", NULL),
_OMAP3_BALLENTRY(ETK_D3, "aa3", NULL),
_OMAP3_BALLENTRY(ETK_D4, "y3", NULL),
_OMAP3_BALLENTRY(ETK_D5, "ab1", NULL),
_OMAP3_BALLENTRY(ETK_D6, "ae3", NULL),
_OMAP3_BALLENTRY(ETK_D7, "ad2", NULL),
_OMAP3_BALLENTRY(ETK_D8, "aa4", NULL),
_OMAP3_BALLENTRY(ETK_D9, "v2", NULL),
_OMAP3_BALLENTRY(GPMC_A1, "j2", NULL),
_OMAP3_BALLENTRY(GPMC_A10, "d2", NULL),
_OMAP3_BALLENTRY(GPMC_A2, "h1", NULL),
_OMAP3_BALLENTRY(GPMC_A3, "h2", NULL),
_OMAP3_BALLENTRY(GPMC_A4, "g2", NULL),
_OMAP3_BALLENTRY(GPMC_A5, "f1", NULL),
_OMAP3_BALLENTRY(GPMC_A6, "f2", NULL),
_OMAP3_BALLENTRY(GPMC_A7, "e1", NULL),
_OMAP3_BALLENTRY(GPMC_A8, "e2", NULL),
_OMAP3_BALLENTRY(GPMC_A9, "d1", NULL),
_OMAP3_BALLENTRY(GPMC_CLK, "n1", "l1"),
_OMAP3_BALLENTRY(GPMC_D10, "t1", "n1"),
_OMAP3_BALLENTRY(GPMC_D11, "u2", "p2"),
_OMAP3_BALLENTRY(GPMC_D12, "u1", "p1"),
_OMAP3_BALLENTRY(GPMC_D13, "p1", "m1"),
_OMAP3_BALLENTRY(GPMC_D14, "l2", "j2"),
_OMAP3_BALLENTRY(GPMC_D15, "m2", "k2"),
_OMAP3_BALLENTRY(GPMC_D8, "v1", "r1"),
_OMAP3_BALLENTRY(GPMC_D9, "y1", "t1"),
_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k2", NULL),
_OMAP3_BALLENTRY(GPMC_NBE1, "j1", NULL),
_OMAP3_BALLENTRY(GPMC_NCS1, "ad1", "w1"),
_OMAP3_BALLENTRY(GPMC_NCS2, "a3", NULL),
_OMAP3_BALLENTRY(GPMC_NCS3, "b6", NULL),
_OMAP3_BALLENTRY(GPMC_NCS4, "b4", NULL),
_OMAP3_BALLENTRY(GPMC_NCS5, "c4", NULL),
_OMAP3_BALLENTRY(GPMC_NCS6, "b5", NULL),
_OMAP3_BALLENTRY(GPMC_NCS7, "c5", NULL),
_OMAP3_BALLENTRY(GPMC_NWP, "ac6", "y5"),
_OMAP3_BALLENTRY(GPMC_WAIT1, "ac8", "y8"),
_OMAP3_BALLENTRY(GPMC_WAIT2, "b3", NULL),
_OMAP3_BALLENTRY(GPMC_WAIT3, "c6", NULL),
_OMAP3_BALLENTRY(HDQ_SIO, "j23", NULL),
_OMAP3_BALLENTRY(HSUSB0_CLK, "w19", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA0, "v20", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA1, "y20", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA2, "v18", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA3, "w20", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA4, "w17", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA5, "y18", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA6, "y19", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA7, "y17", NULL),
_OMAP3_BALLENTRY(HSUSB0_DIR, "v19", NULL),
_OMAP3_BALLENTRY(HSUSB0_NXT, "w18", NULL),
_OMAP3_BALLENTRY(HSUSB0_STP, "u20", NULL),
_OMAP3_BALLENTRY(I2C2_SCL, "c2", NULL),
_OMAP3_BALLENTRY(I2C2_SDA, "c1", NULL),
_OMAP3_BALLENTRY(I2C3_SCL, "ab4", NULL),
_OMAP3_BALLENTRY(I2C3_SDA, "ac4", NULL),
_OMAP3_BALLENTRY(I2C4_SCL, "ad15", NULL),
_OMAP3_BALLENTRY(I2C4_SDA, "w16", NULL),
_OMAP3_BALLENTRY(JTAG_EMU0, "y15", NULL),
_OMAP3_BALLENTRY(JTAG_EMU1, "y14", NULL),
_OMAP3_BALLENTRY(MCBSP1_CLKR, "u19", NULL),
_OMAP3_BALLENTRY(MCBSP1_CLKX, "t17", NULL),
_OMAP3_BALLENTRY(MCBSP1_DR, "t20", NULL),
_OMAP3_BALLENTRY(MCBSP1_DX, "u17", NULL),
_OMAP3_BALLENTRY(MCBSP1_FSR, "v17", NULL),
_OMAP3_BALLENTRY(MCBSP1_FSX, "p20", NULL),
_OMAP3_BALLENTRY(MCBSP2_CLKX, "r18", NULL),
_OMAP3_BALLENTRY(MCBSP2_DR, "t18", NULL),
_OMAP3_BALLENTRY(MCBSP2_DX, "r19", NULL),
_OMAP3_BALLENTRY(MCBSP2_FSX, "u18", NULL),
_OMAP3_BALLENTRY(MCBSP3_CLKX, "u3", NULL),
_OMAP3_BALLENTRY(MCBSP3_DR, "n3", NULL),
_OMAP3_BALLENTRY(MCBSP3_DX, "p3", NULL),
_OMAP3_BALLENTRY(MCBSP3_FSX, "w3", NULL),
_OMAP3_BALLENTRY(MCBSP4_CLKX, "v3", NULL),
_OMAP3_BALLENTRY(MCBSP4_DR, "u4", NULL),
_OMAP3_BALLENTRY(MCBSP4_DX, "r3", NULL),
_OMAP3_BALLENTRY(MCBSP4_FSX, "t3", NULL),
_OMAP3_BALLENTRY(MCBSP_CLKS, "t19", NULL),
_OMAP3_BALLENTRY(MCSPI1_CLK, "p9", NULL),
_OMAP3_BALLENTRY(MCSPI1_CS0, "r7", NULL),
_OMAP3_BALLENTRY(MCSPI1_CS1, "r8", NULL),
_OMAP3_BALLENTRY(MCSPI1_CS2, "r9", NULL),
_OMAP3_BALLENTRY(MCSPI1_CS3, "t8", NULL),
_OMAP3_BALLENTRY(MCSPI1_SIMO, "p8", NULL),
_OMAP3_BALLENTRY(MCSPI1_SOMI, "p7", NULL),
_OMAP3_BALLENTRY(MCSPI2_CLK, "w7", NULL),
_OMAP3_BALLENTRY(MCSPI2_CS0, "v8", NULL),
_OMAP3_BALLENTRY(MCSPI2_CS1, "v9", NULL),
_OMAP3_BALLENTRY(MCSPI2_SIMO, "w8", NULL),
_OMAP3_BALLENTRY(MCSPI2_SOMI, "u8", NULL),
_OMAP3_BALLENTRY(SDMMC1_CLK, "n19", NULL),
_OMAP3_BALLENTRY(SDMMC1_CMD, "l18", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT0, "m19", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT1, "m18", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT2, "k18", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT3, "n20", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT4, "m20", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT5, "p17", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT6, "p18", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT7, "p19", NULL),
_OMAP3_BALLENTRY(SDMMC2_CLK, "w10", NULL),
_OMAP3_BALLENTRY(SDMMC2_CMD, "r10", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT0, "t10", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT1, "t9", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT2, "u10", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT3, "u9", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT4, "v10", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT5, "m3", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT6, "l3", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT7, "k3", NULL),
_OMAP3_BALLENTRY(SYS_BOOT0, "f3", NULL),
_OMAP3_BALLENTRY(SYS_BOOT1, "d3", NULL),
_OMAP3_BALLENTRY(SYS_BOOT2, "c3", NULL),
_OMAP3_BALLENTRY(SYS_BOOT3, "e3", NULL),
_OMAP3_BALLENTRY(SYS_BOOT4, "e4", NULL),
_OMAP3_BALLENTRY(SYS_BOOT5, "g3", NULL),
_OMAP3_BALLENTRY(SYS_BOOT6, "d4", NULL),
_OMAP3_BALLENTRY(SYS_CLKOUT1, "ae14", NULL),
_OMAP3_BALLENTRY(SYS_CLKOUT2, "w11", NULL),
_OMAP3_BALLENTRY(SYS_CLKREQ, "w15", NULL),
_OMAP3_BALLENTRY(SYS_NIRQ, "v16", NULL),
_OMAP3_BALLENTRY(SYS_NRESWARM, "ad7", "aa5"),
_OMAP3_BALLENTRY(SYS_OFF_MODE, "v12", NULL),
_OMAP3_BALLENTRY(UART1_CTS, "w2", NULL),
_OMAP3_BALLENTRY(UART1_RTS, "r2", NULL),
_OMAP3_BALLENTRY(UART1_RX, "h3", NULL),
_OMAP3_BALLENTRY(UART1_TX, "l4", NULL),
_OMAP3_BALLENTRY(UART2_CTS, "y24", NULL),
_OMAP3_BALLENTRY(UART2_RTS, "aa24", NULL),
_OMAP3_BALLENTRY(UART2_RX, "ad21", NULL),
_OMAP3_BALLENTRY(UART2_TX, "ad22", NULL),
_OMAP3_BALLENTRY(UART3_CTS_RCTX, "f23", NULL),
_OMAP3_BALLENTRY(UART3_RTS_SD, "f24", NULL),
_OMAP3_BALLENTRY(UART3_RX_IRRX, "h24", NULL),
_OMAP3_BALLENTRY(UART3_TX_IRTX, "g24", NULL),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define omap3_cbc_ball NULL
#endif
/*
* Signals different on CUS package compared to superset
*/
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CUS)
OMAP: mach-omap2: Fix static declaration warnings This patch fixes sparse warnings due to non declaration of static structures and variables. Sparse warning logs fixed: arch/arm/mach-omap2/control.c:88:6: warning: symbol 'omap3_secure_ram_storage' was not declared. Should it be static? n arch/arm/mach-omap2/timer-gp.c:50:22: warning: symbol 'gptimer_wakeup' was not declared. Should it be static? arch/arm/mach-omap2/timer-gp.c:240:18: warning: symbol 'omap_timer' was not declared. Should it be static? arch/arm/mach-omap2/prcm.c:121:24: warning: symbol 'prcm_context' was not declared. Should it be static? arch/arm/mach-omap2/mux2420.c:510:29: warning: symbol 'omap2420_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux2430.c:589:29: warning: symbol 'omap2430_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:934:28: warning: symbol 'omap3_cus_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1080:29: warning: symbol 'omap3_cus_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1272:28: warning: symbol 'omap3_cbb_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1393:29: warning: symbol 'omap3_cbb_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1603:28: warning: symbol 'omap36xx_cbp_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1821:29: warning: symbol 'omap36xx_cbp_ball' was not declared. Should it be static? arch/arm/mach-omap2/pm-debug.c:165:15: warning: symbol 'pm_dbg_dir' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:587:30: warning: symbol 'ads7846_config' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:606:23: warning: symbol 'omap3evm_spi_board_info' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:46:25: warning: symbol 'rx51_sdrc_params' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:211:25: warning: symbol 'rx51_get_sdram_timings' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3touchbook.c:64:15: warning: symbol 'touchbook_revision' was not declared. Should it be static? arch/arm/mach-omap2/board-am3517evm.c:350:24: warning: symbol 'am3517_evm_dss_device' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3stalker.c:567:23: warning: symbol 'omap3stalker_spi_board_info' was not declared. Should it be static? Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-08 20:56:37 +04:00
static struct omap_mux __initdata omap3_cus_subset[] = {
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
_OMAP3_MUXENTRY(CAM_D10, 109,
"cam_d10", NULL, NULL, NULL,
"gpio_109", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D11, 110,
"cam_d11", NULL, NULL, NULL,
"gpio_110", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D2, 101,
"cam_d2", NULL, NULL, NULL,
"gpio_101", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D3, 102,
"cam_d3", NULL, NULL, NULL,
"gpio_102", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D4, 103,
"cam_d4", NULL, NULL, NULL,
"gpio_103", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D5, 104,
"cam_d5", NULL, NULL, NULL,
"gpio_104", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_FLD, 98,
"cam_fld", NULL, "cam_global_reset", NULL,
"gpio_98", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_HS, 94,
"cam_hs", NULL, NULL, NULL,
"gpio_94", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_PCLK, 97,
"cam_pclk", NULL, NULL, NULL,
"gpio_97", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_STROBE, 126,
"cam_strobe", NULL, NULL, NULL,
"gpio_126", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_VS, 95,
"cam_vs", NULL, NULL, NULL,
"gpio_95", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_WEN, 167,
"cam_wen", NULL, "cam_shutter", NULL,
"gpio_167", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA6, 76,
"dss_data6", NULL, "uart1_tx", NULL,
"gpio_76", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA7, 77,
"dss_data7", NULL, "uart1_rx", NULL,
"gpio_77", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA8, 78,
"dss_data8", NULL, NULL, NULL,
"gpio_78", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA9, 79,
"dss_data9", NULL, NULL, NULL,
"gpio_79", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_HSYNC, 67,
"dss_hsync", NULL, NULL, NULL,
"gpio_67", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_PCLK, 66,
"dss_pclk", NULL, NULL, NULL,
"gpio_66", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(ETK_CLK, 12,
"etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
"gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL),
_OMAP3_MUXENTRY(ETK_CTL, 13,
"etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
"gpio_13", NULL, "hsusb1_tll_clk", NULL),
_OMAP3_MUXENTRY(ETK_D0, 14,
"etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
"gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL),
_OMAP3_MUXENTRY(ETK_D1, 15,
"etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
"gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL),
_OMAP3_MUXENTRY(ETK_D10, 24,
"etk_d10", NULL, "uart1_rx", "hsusb2_clk",
"gpio_24", NULL, "hsusb2_tll_clk", NULL),
_OMAP3_MUXENTRY(ETK_D11, 25,
"etk_d11", NULL, NULL, "hsusb2_stp",
"gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL),
_OMAP3_MUXENTRY(ETK_D12, 26,
"etk_d12", NULL, NULL, "hsusb2_dir",
"gpio_26", NULL, "hsusb2_tll_dir", NULL),
_OMAP3_MUXENTRY(ETK_D13, 27,
"etk_d13", NULL, NULL, "hsusb2_nxt",
"gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL),
_OMAP3_MUXENTRY(ETK_D14, 28,
"etk_d14", NULL, NULL, "hsusb2_data0",
"gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL),
_OMAP3_MUXENTRY(ETK_D15, 29,
"etk_d15", NULL, NULL, "hsusb2_data1",
"gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL),
_OMAP3_MUXENTRY(ETK_D2, 16,
"etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
"gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL),
_OMAP3_MUXENTRY(ETK_D3, 17,
"etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
"gpio_17", NULL, "hsusb1_tll_data7", NULL),
_OMAP3_MUXENTRY(ETK_D4, 18,
"etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
"gpio_18", NULL, "hsusb1_tll_data4", NULL),
_OMAP3_MUXENTRY(ETK_D5, 19,
"etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
"gpio_19", NULL, "hsusb1_tll_data5", NULL),
_OMAP3_MUXENTRY(ETK_D6, 20,
"etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
"gpio_20", NULL, "hsusb1_tll_data6", NULL),
_OMAP3_MUXENTRY(ETK_D7, 21,
"etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
"gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL),
_OMAP3_MUXENTRY(ETK_D8, 22,
"etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
"gpio_22", NULL, "hsusb1_tll_dir", NULL),
_OMAP3_MUXENTRY(ETK_D9, 23,
"etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
"gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL),
_OMAP3_MUXENTRY(MCBSP3_CLKX, 142,
"mcbsp3_clkx", "uart2_tx", NULL, NULL,
"gpio_142", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP3_DR, 141,
"mcbsp3_dr", "uart2_rts", NULL, NULL,
"gpio_141", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP3_DX, 140,
"mcbsp3_dx", "uart2_cts", NULL, NULL,
"gpio_140", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP3_FSX, 143,
"mcbsp3_fsx", "uart2_rx", NULL, NULL,
"gpio_143", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC2_DAT5, 137,
"sdmmc2_dat5", "sdmmc2_dir_dat1",
"cam_global_reset", "sdmmc3_dat1",
"gpio_137", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC2_DAT6, 138,
"sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2",
"gpio_138", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC2_DAT7, 139,
"sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3",
"gpio_139", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_CTS, 150,
"uart1_cts", NULL, NULL, NULL,
"gpio_150", NULL, NULL, "safe_mode"),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define omap3_cus_subset NULL
#endif
/*
* Balls for CUS package
* 423-pin s-PBGA Package, 0.65mm Ball Pitch (Bottom)
*/
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
&& defined(CONFIG_OMAP_PACKAGE_CUS)
OMAP: mach-omap2: Fix static declaration warnings This patch fixes sparse warnings due to non declaration of static structures and variables. Sparse warning logs fixed: arch/arm/mach-omap2/control.c:88:6: warning: symbol 'omap3_secure_ram_storage' was not declared. Should it be static? n arch/arm/mach-omap2/timer-gp.c:50:22: warning: symbol 'gptimer_wakeup' was not declared. Should it be static? arch/arm/mach-omap2/timer-gp.c:240:18: warning: symbol 'omap_timer' was not declared. Should it be static? arch/arm/mach-omap2/prcm.c:121:24: warning: symbol 'prcm_context' was not declared. Should it be static? arch/arm/mach-omap2/mux2420.c:510:29: warning: symbol 'omap2420_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux2430.c:589:29: warning: symbol 'omap2430_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:934:28: warning: symbol 'omap3_cus_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1080:29: warning: symbol 'omap3_cus_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1272:28: warning: symbol 'omap3_cbb_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1393:29: warning: symbol 'omap3_cbb_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1603:28: warning: symbol 'omap36xx_cbp_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1821:29: warning: symbol 'omap36xx_cbp_ball' was not declared. Should it be static? arch/arm/mach-omap2/pm-debug.c:165:15: warning: symbol 'pm_dbg_dir' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:587:30: warning: symbol 'ads7846_config' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:606:23: warning: symbol 'omap3evm_spi_board_info' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:46:25: warning: symbol 'rx51_sdrc_params' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:211:25: warning: symbol 'rx51_get_sdram_timings' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3touchbook.c:64:15: warning: symbol 'touchbook_revision' was not declared. Should it be static? arch/arm/mach-omap2/board-am3517evm.c:350:24: warning: symbol 'am3517_evm_dss_device' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3stalker.c:567:23: warning: symbol 'omap3stalker_spi_board_info' was not declared. Should it be static? Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-08 20:56:37 +04:00
static struct omap_ball __initdata omap3_cus_ball[] = {
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
_OMAP3_BALLENTRY(CAM_D0, "ab18", NULL),
_OMAP3_BALLENTRY(CAM_D1, "ac18", NULL),
_OMAP3_BALLENTRY(CAM_D10, "f21", NULL),
_OMAP3_BALLENTRY(CAM_D11, "g21", NULL),
_OMAP3_BALLENTRY(CAM_D2, "g19", NULL),
_OMAP3_BALLENTRY(CAM_D3, "f19", NULL),
_OMAP3_BALLENTRY(CAM_D4, "g20", NULL),
_OMAP3_BALLENTRY(CAM_D5, "b21", NULL),
_OMAP3_BALLENTRY(CAM_D6, "l24", NULL),
_OMAP3_BALLENTRY(CAM_D7, "k24", NULL),
_OMAP3_BALLENTRY(CAM_D8, "j23", NULL),
_OMAP3_BALLENTRY(CAM_D9, "k23", NULL),
_OMAP3_BALLENTRY(CAM_FLD, "h24", NULL),
_OMAP3_BALLENTRY(CAM_HS, "a22", NULL),
_OMAP3_BALLENTRY(CAM_PCLK, "j19", NULL),
_OMAP3_BALLENTRY(CAM_STROBE, "j20", NULL),
_OMAP3_BALLENTRY(CAM_VS, "e18", NULL),
_OMAP3_BALLENTRY(CAM_WEN, "f18", NULL),
_OMAP3_BALLENTRY(CAM_XCLKA, "b22", NULL),
_OMAP3_BALLENTRY(CAM_XCLKB, "c22", NULL),
_OMAP3_BALLENTRY(DSS_ACBIAS, "j21", NULL),
_OMAP3_BALLENTRY(DSS_DATA0, "ac19", NULL),
_OMAP3_BALLENTRY(DSS_DATA1, "ab19", NULL),
_OMAP3_BALLENTRY(DSS_DATA10, "ac22", NULL),
_OMAP3_BALLENTRY(DSS_DATA11, "ac23", NULL),
_OMAP3_BALLENTRY(DSS_DATA12, "ab22", NULL),
_OMAP3_BALLENTRY(DSS_DATA13, "y22", NULL),
_OMAP3_BALLENTRY(DSS_DATA14, "w22", NULL),
_OMAP3_BALLENTRY(DSS_DATA15, "v22", NULL),
_OMAP3_BALLENTRY(DSS_DATA16, "j22", NULL),
_OMAP3_BALLENTRY(DSS_DATA17, "g23", NULL),
_OMAP3_BALLENTRY(DSS_DATA18, "g24", NULL),
_OMAP3_BALLENTRY(DSS_DATA19, "h23", NULL),
_OMAP3_BALLENTRY(DSS_DATA2, "ad20", NULL),
_OMAP3_BALLENTRY(DSS_DATA20, "d23", NULL),
_OMAP3_BALLENTRY(DSS_DATA21, "k22", NULL),
_OMAP3_BALLENTRY(DSS_DATA22, "v21", NULL),
_OMAP3_BALLENTRY(DSS_DATA23, "w21", NULL),
_OMAP3_BALLENTRY(DSS_DATA3, "ac20", NULL),
_OMAP3_BALLENTRY(DSS_DATA4, "ad21", NULL),
_OMAP3_BALLENTRY(DSS_DATA5, "ac21", NULL),
_OMAP3_BALLENTRY(DSS_DATA6, "d24", NULL),
_OMAP3_BALLENTRY(DSS_DATA7, "e23", NULL),
_OMAP3_BALLENTRY(DSS_DATA8, "e24", NULL),
_OMAP3_BALLENTRY(DSS_DATA9, "f23", NULL),
_OMAP3_BALLENTRY(DSS_HSYNC, "e22", NULL),
_OMAP3_BALLENTRY(DSS_PCLK, "g22", NULL),
_OMAP3_BALLENTRY(DSS_VSYNC, "f22", NULL),
_OMAP3_BALLENTRY(ETK_CLK, "ac1", NULL),
_OMAP3_BALLENTRY(ETK_CTL, "ad3", NULL),
_OMAP3_BALLENTRY(ETK_D0, "ad6", NULL),
_OMAP3_BALLENTRY(ETK_D1, "ac6", NULL),
_OMAP3_BALLENTRY(ETK_D10, "ac3", NULL),
_OMAP3_BALLENTRY(ETK_D11, "ac9", NULL),
_OMAP3_BALLENTRY(ETK_D12, "ac10", NULL),
_OMAP3_BALLENTRY(ETK_D13, "ad11", NULL),
_OMAP3_BALLENTRY(ETK_D14, "ac11", NULL),
_OMAP3_BALLENTRY(ETK_D15, "ad12", NULL),
_OMAP3_BALLENTRY(ETK_D2, "ac7", NULL),
_OMAP3_BALLENTRY(ETK_D3, "ad8", NULL),
_OMAP3_BALLENTRY(ETK_D4, "ac5", NULL),
_OMAP3_BALLENTRY(ETK_D5, "ad2", NULL),
_OMAP3_BALLENTRY(ETK_D6, "ac8", NULL),
_OMAP3_BALLENTRY(ETK_D7, "ad9", NULL),
_OMAP3_BALLENTRY(ETK_D8, "ac4", NULL),
_OMAP3_BALLENTRY(ETK_D9, "ad5", NULL),
_OMAP3_BALLENTRY(GPMC_A1, "k4", NULL),
_OMAP3_BALLENTRY(GPMC_A10, "g2", NULL),
_OMAP3_BALLENTRY(GPMC_A2, "k3", NULL),
_OMAP3_BALLENTRY(GPMC_A3, "k2", NULL),
_OMAP3_BALLENTRY(GPMC_A4, "j4", NULL),
_OMAP3_BALLENTRY(GPMC_A5, "j3", NULL),
_OMAP3_BALLENTRY(GPMC_A6, "j2", NULL),
_OMAP3_BALLENTRY(GPMC_A7, "j1", NULL),
_OMAP3_BALLENTRY(GPMC_A8, "h1", NULL),
_OMAP3_BALLENTRY(GPMC_A9, "h2", NULL),
_OMAP3_BALLENTRY(GPMC_CLK, "w2", NULL),
_OMAP3_BALLENTRY(GPMC_D10, "u1", NULL),
_OMAP3_BALLENTRY(GPMC_D11, "r3", NULL),
_OMAP3_BALLENTRY(GPMC_D12, "t3", NULL),
_OMAP3_BALLENTRY(GPMC_D13, "u2", NULL),
_OMAP3_BALLENTRY(GPMC_D14, "v1", NULL),
_OMAP3_BALLENTRY(GPMC_D15, "v2", NULL),
_OMAP3_BALLENTRY(GPMC_D8, "r2", NULL),
_OMAP3_BALLENTRY(GPMC_D9, "t2", NULL),
_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k5", NULL),
_OMAP3_BALLENTRY(GPMC_NBE1, "l1", NULL),
_OMAP3_BALLENTRY(GPMC_NCS3, "d2", NULL),
_OMAP3_BALLENTRY(GPMC_NCS4, "f4", NULL),
_OMAP3_BALLENTRY(GPMC_NCS5, "g5", NULL),
_OMAP3_BALLENTRY(GPMC_NCS6, "f3", NULL),
_OMAP3_BALLENTRY(GPMC_NCS7, "g4", NULL),
_OMAP3_BALLENTRY(GPMC_NWP, "e1", NULL),
_OMAP3_BALLENTRY(GPMC_WAIT3, "c2", NULL),
_OMAP3_BALLENTRY(HDQ_SIO, "a24", NULL),
_OMAP3_BALLENTRY(HSUSB0_CLK, "r21", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA0, "t24", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA1, "t23", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA2, "u24", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA3, "u23", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA4, "w24", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA5, "v23", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA6, "w23", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA7, "t22", NULL),
_OMAP3_BALLENTRY(HSUSB0_DIR, "p23", NULL),
_OMAP3_BALLENTRY(HSUSB0_NXT, "r22", NULL),
_OMAP3_BALLENTRY(HSUSB0_STP, "r23", NULL),
_OMAP3_BALLENTRY(I2C2_SCL, "ac15", NULL),
_OMAP3_BALLENTRY(I2C2_SDA, "ac14", NULL),
_OMAP3_BALLENTRY(I2C3_SCL, "ac13", NULL),
_OMAP3_BALLENTRY(I2C3_SDA, "ac12", NULL),
_OMAP3_BALLENTRY(I2C4_SCL, "y16", NULL),
_OMAP3_BALLENTRY(I2C4_SDA, "y15", NULL),
_OMAP3_BALLENTRY(JTAG_EMU0, "ac24", NULL),
_OMAP3_BALLENTRY(JTAG_EMU1, "ad24", NULL),
_OMAP3_BALLENTRY(MCBSP1_CLKR, "w19", NULL),
_OMAP3_BALLENTRY(MCBSP1_CLKX, "v18", NULL),
_OMAP3_BALLENTRY(MCBSP1_DR, "y18", NULL),
_OMAP3_BALLENTRY(MCBSP1_DX, "w18", NULL),
_OMAP3_BALLENTRY(MCBSP1_FSR, "ab20", NULL),
_OMAP3_BALLENTRY(MCBSP1_FSX, "aa19", NULL),
_OMAP3_BALLENTRY(MCBSP2_CLKX, "t21", NULL),
_OMAP3_BALLENTRY(MCBSP2_DR, "v19", NULL),
_OMAP3_BALLENTRY(MCBSP2_DX, "r20", NULL),
_OMAP3_BALLENTRY(MCBSP2_FSX, "v20", NULL),
_OMAP3_BALLENTRY(MCBSP3_CLKX, "w4", NULL),
_OMAP3_BALLENTRY(MCBSP3_DR, "v5", NULL),
_OMAP3_BALLENTRY(MCBSP3_DX, "v6", NULL),
_OMAP3_BALLENTRY(MCBSP3_FSX, "v4", NULL),
_OMAP3_BALLENTRY(MCBSP_CLKS, "aa18", NULL),
_OMAP3_BALLENTRY(MCSPI1_CLK, "t5", NULL),
_OMAP3_BALLENTRY(MCSPI1_CS0, "t6", NULL),
_OMAP3_BALLENTRY(MCSPI1_CS3, "r5", NULL),
_OMAP3_BALLENTRY(MCSPI1_SIMO, "r4", NULL),
_OMAP3_BALLENTRY(MCSPI1_SOMI, "t4", NULL),
_OMAP3_BALLENTRY(MCSPI2_CLK, "n5", NULL),
_OMAP3_BALLENTRY(MCSPI2_CS0, "m5", NULL),
_OMAP3_BALLENTRY(MCSPI2_CS1, "m4", NULL),
_OMAP3_BALLENTRY(MCSPI2_SIMO, "n4", NULL),
_OMAP3_BALLENTRY(MCSPI2_SOMI, "n3", NULL),
_OMAP3_BALLENTRY(SDMMC1_CLK, "m23", NULL),
_OMAP3_BALLENTRY(SDMMC1_CMD, "l23", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT0, "m22", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT1, "m21", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT2, "m20", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT3, "n23", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT4, "n22", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT5, "n21", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT6, "n20", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT7, "p24", NULL),
_OMAP3_BALLENTRY(SDMMC2_CLK, "y1", NULL),
_OMAP3_BALLENTRY(SDMMC2_CMD, "ab5", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT0, "ab3", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT1, "y3", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT2, "w3", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT3, "v3", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT4, "ab2", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT5, "aa2", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT6, "y2", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT7, "aa1", NULL),
_OMAP3_BALLENTRY(SYS_BOOT0, "ab12", NULL),
_OMAP3_BALLENTRY(SYS_BOOT1, "ac16", NULL),
_OMAP3_BALLENTRY(SYS_BOOT2, "ad17", NULL),
_OMAP3_BALLENTRY(SYS_BOOT3, "ad18", NULL),
_OMAP3_BALLENTRY(SYS_BOOT4, "ac17", NULL),
_OMAP3_BALLENTRY(SYS_BOOT5, "ab16", NULL),
_OMAP3_BALLENTRY(SYS_BOOT6, "aa15", NULL),
_OMAP3_BALLENTRY(SYS_CLKOUT1, "y7", NULL),
_OMAP3_BALLENTRY(SYS_CLKOUT2, "aa6", NULL),
_OMAP3_BALLENTRY(SYS_CLKREQ, "y13", NULL),
_OMAP3_BALLENTRY(SYS_NIRQ, "w16", NULL),
_OMAP3_BALLENTRY(SYS_NRESWARM, "y10", NULL),
_OMAP3_BALLENTRY(SYS_OFF_MODE, "ad23", NULL),
_OMAP3_BALLENTRY(UART1_CTS, "ac2", NULL),
_OMAP3_BALLENTRY(UART1_RTS, "w6", NULL),
_OMAP3_BALLENTRY(UART1_RX, "v7", NULL),
_OMAP3_BALLENTRY(UART1_TX, "w7", NULL),
_OMAP3_BALLENTRY(UART3_CTS_RCTX, "a23", NULL),
_OMAP3_BALLENTRY(UART3_RTS_SD, "b23", NULL),
_OMAP3_BALLENTRY(UART3_RX_IRRX, "b24", NULL),
_OMAP3_BALLENTRY(UART3_TX_IRTX, "c23", NULL),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define omap3_cus_ball NULL
#endif
/*
* Signals different on CBB package comapared to superset
*/
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB)
OMAP: mach-omap2: Fix static declaration warnings This patch fixes sparse warnings due to non declaration of static structures and variables. Sparse warning logs fixed: arch/arm/mach-omap2/control.c:88:6: warning: symbol 'omap3_secure_ram_storage' was not declared. Should it be static? n arch/arm/mach-omap2/timer-gp.c:50:22: warning: symbol 'gptimer_wakeup' was not declared. Should it be static? arch/arm/mach-omap2/timer-gp.c:240:18: warning: symbol 'omap_timer' was not declared. Should it be static? arch/arm/mach-omap2/prcm.c:121:24: warning: symbol 'prcm_context' was not declared. Should it be static? arch/arm/mach-omap2/mux2420.c:510:29: warning: symbol 'omap2420_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux2430.c:589:29: warning: symbol 'omap2430_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:934:28: warning: symbol 'omap3_cus_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1080:29: warning: symbol 'omap3_cus_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1272:28: warning: symbol 'omap3_cbb_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1393:29: warning: symbol 'omap3_cbb_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1603:28: warning: symbol 'omap36xx_cbp_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1821:29: warning: symbol 'omap36xx_cbp_ball' was not declared. Should it be static? arch/arm/mach-omap2/pm-debug.c:165:15: warning: symbol 'pm_dbg_dir' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:587:30: warning: symbol 'ads7846_config' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:606:23: warning: symbol 'omap3evm_spi_board_info' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:46:25: warning: symbol 'rx51_sdrc_params' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:211:25: warning: symbol 'rx51_get_sdram_timings' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3touchbook.c:64:15: warning: symbol 'touchbook_revision' was not declared. Should it be static? arch/arm/mach-omap2/board-am3517evm.c:350:24: warning: symbol 'am3517_evm_dss_device' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3stalker.c:567:23: warning: symbol 'omap3stalker_spi_board_info' was not declared. Should it be static? Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-08 20:56:37 +04:00
static struct omap_mux __initdata omap3_cbb_subset[] = {
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
_OMAP3_MUXENTRY(CAM_D10, 109,
"cam_d10", NULL, NULL, NULL,
"gpio_109", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D11, 110,
"cam_d11", NULL, NULL, NULL,
"gpio_110", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D2, 101,
"cam_d2", NULL, NULL, NULL,
"gpio_101", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D3, 102,
"cam_d3", NULL, NULL, NULL,
"gpio_102", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D4, 103,
"cam_d4", NULL, NULL, NULL,
"gpio_103", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D5, 104,
"cam_d5", NULL, NULL, NULL,
"gpio_104", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_FLD, 98,
"cam_fld", NULL, "cam_global_reset", NULL,
"gpio_98", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_HS, 94,
"cam_hs", NULL, NULL, NULL,
"gpio_94", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_PCLK, 97,
"cam_pclk", NULL, NULL, NULL,
"gpio_97", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_STROBE, 126,
"cam_strobe", NULL, NULL, NULL,
"gpio_126", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_VS, 95,
"cam_vs", NULL, NULL, NULL,
"gpio_95", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_WEN, 167,
"cam_wen", NULL, "cam_shutter", NULL,
"gpio_167", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA6, 76,
"dss_data6", NULL, "uart1_tx", NULL,
"gpio_76", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA7, 77,
"dss_data7", NULL, "uart1_rx", NULL,
"gpio_77", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA8, 78,
"dss_data8", NULL, NULL, NULL,
"gpio_78", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA9, 79,
"dss_data9", NULL, NULL, NULL,
"gpio_79", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_HSYNC, 67,
"dss_hsync", NULL, NULL, NULL,
"gpio_67", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_PCLK, 66,
"dss_pclk", NULL, NULL, NULL,
"gpio_66", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(ETK_CLK, 12,
"etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
"gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL),
_OMAP3_MUXENTRY(ETK_CTL, 13,
"etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
"gpio_13", NULL, "hsusb1_tll_clk", NULL),
_OMAP3_MUXENTRY(ETK_D0, 14,
"etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
"gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL),
_OMAP3_MUXENTRY(ETK_D1, 15,
"etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
"gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL),
_OMAP3_MUXENTRY(ETK_D10, 24,
"etk_d10", NULL, "uart1_rx", "hsusb2_clk",
"gpio_24", NULL, "hsusb2_tll_clk", NULL),
_OMAP3_MUXENTRY(ETK_D11, 25,
"etk_d11", NULL, NULL, "hsusb2_stp",
"gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL),
_OMAP3_MUXENTRY(ETK_D12, 26,
"etk_d12", NULL, NULL, "hsusb2_dir",
"gpio_26", NULL, "hsusb2_tll_dir", NULL),
_OMAP3_MUXENTRY(ETK_D13, 27,
"etk_d13", NULL, NULL, "hsusb2_nxt",
"gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL),
_OMAP3_MUXENTRY(ETK_D14, 28,
"etk_d14", NULL, NULL, "hsusb2_data0",
"gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL),
_OMAP3_MUXENTRY(ETK_D15, 29,
"etk_d15", NULL, NULL, "hsusb2_data1",
"gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL),
_OMAP3_MUXENTRY(ETK_D2, 16,
"etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
"gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL),
_OMAP3_MUXENTRY(ETK_D3, 17,
"etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
"gpio_17", NULL, "hsusb1_tll_data7", NULL),
_OMAP3_MUXENTRY(ETK_D4, 18,
"etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
"gpio_18", NULL, "hsusb1_tll_data4", NULL),
_OMAP3_MUXENTRY(ETK_D5, 19,
"etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
"gpio_19", NULL, "hsusb1_tll_data5", NULL),
_OMAP3_MUXENTRY(ETK_D6, 20,
"etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
"gpio_20", NULL, "hsusb1_tll_data6", NULL),
_OMAP3_MUXENTRY(ETK_D7, 21,
"etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
"gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL),
_OMAP3_MUXENTRY(ETK_D8, 22,
"etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
"gpio_22", NULL, "hsusb1_tll_dir", NULL),
_OMAP3_MUXENTRY(ETK_D9, 23,
"etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
"gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define omap3_cbb_subset NULL
#endif
/*
* Balls for CBB package
* 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom)
*/
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
&& defined(CONFIG_OMAP_PACKAGE_CBB)
OMAP: mach-omap2: Fix static declaration warnings This patch fixes sparse warnings due to non declaration of static structures and variables. Sparse warning logs fixed: arch/arm/mach-omap2/control.c:88:6: warning: symbol 'omap3_secure_ram_storage' was not declared. Should it be static? n arch/arm/mach-omap2/timer-gp.c:50:22: warning: symbol 'gptimer_wakeup' was not declared. Should it be static? arch/arm/mach-omap2/timer-gp.c:240:18: warning: symbol 'omap_timer' was not declared. Should it be static? arch/arm/mach-omap2/prcm.c:121:24: warning: symbol 'prcm_context' was not declared. Should it be static? arch/arm/mach-omap2/mux2420.c:510:29: warning: symbol 'omap2420_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux2430.c:589:29: warning: symbol 'omap2430_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:934:28: warning: symbol 'omap3_cus_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1080:29: warning: symbol 'omap3_cus_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1272:28: warning: symbol 'omap3_cbb_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1393:29: warning: symbol 'omap3_cbb_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1603:28: warning: symbol 'omap36xx_cbp_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1821:29: warning: symbol 'omap36xx_cbp_ball' was not declared. Should it be static? arch/arm/mach-omap2/pm-debug.c:165:15: warning: symbol 'pm_dbg_dir' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:587:30: warning: symbol 'ads7846_config' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:606:23: warning: symbol 'omap3evm_spi_board_info' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:46:25: warning: symbol 'rx51_sdrc_params' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:211:25: warning: symbol 'rx51_get_sdram_timings' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3touchbook.c:64:15: warning: symbol 'touchbook_revision' was not declared. Should it be static? arch/arm/mach-omap2/board-am3517evm.c:350:24: warning: symbol 'am3517_evm_dss_device' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3stalker.c:567:23: warning: symbol 'omap3stalker_spi_board_info' was not declared. Should it be static? Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-08 20:56:37 +04:00
static struct omap_ball __initdata omap3_cbb_ball[] = {
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
_OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
_OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
_OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
_OMAP3_BALLENTRY(CAM_D11, "c26", NULL),
_OMAP3_BALLENTRY(CAM_D2, "b24", NULL),
_OMAP3_BALLENTRY(CAM_D3, "c24", NULL),
_OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
_OMAP3_BALLENTRY(CAM_D5, "a25", NULL),
_OMAP3_BALLENTRY(CAM_D6, "k28", NULL),
_OMAP3_BALLENTRY(CAM_D7, "l28", NULL),
_OMAP3_BALLENTRY(CAM_D8, "k27", NULL),
_OMAP3_BALLENTRY(CAM_D9, "l27", NULL),
_OMAP3_BALLENTRY(CAM_FLD, "c23", NULL),
_OMAP3_BALLENTRY(CAM_HS, "a24", NULL),
_OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL),
_OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL),
_OMAP3_BALLENTRY(CAM_VS, "a23", NULL),
_OMAP3_BALLENTRY(CAM_WEN, "b23", NULL),
_OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
_OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL),
_OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL),
_OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL),
_OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL),
_OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL),
_OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL),
_OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL),
_OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL),
_OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL),
_OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL),
_OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL),
_OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL),
_OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL),
_OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL),
_OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL),
_OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL),
_OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL),
_OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL),
_OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL),
_OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL),
_OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL),
_OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL),
_OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL),
_OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL),
_OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL),
_OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL),
_OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL),
_OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL),
_OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL),
_OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL),
_OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL),
_OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL),
_OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL),
_OMAP3_BALLENTRY(ETK_CLK, "af10", NULL),
_OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL),
_OMAP3_BALLENTRY(ETK_D0, "af11", NULL),
_OMAP3_BALLENTRY(ETK_D1, "ag12", NULL),
_OMAP3_BALLENTRY(ETK_D10, "ae7", NULL),
_OMAP3_BALLENTRY(ETK_D11, "af7", NULL),
_OMAP3_BALLENTRY(ETK_D12, "ag7", NULL),
_OMAP3_BALLENTRY(ETK_D13, "ah7", NULL),
_OMAP3_BALLENTRY(ETK_D14, "ag8", NULL),
_OMAP3_BALLENTRY(ETK_D15, "ah8", NULL),
_OMAP3_BALLENTRY(ETK_D2, "ah12", NULL),
_OMAP3_BALLENTRY(ETK_D3, "ae13", NULL),
_OMAP3_BALLENTRY(ETK_D4, "ae11", NULL),
_OMAP3_BALLENTRY(ETK_D5, "ah9", NULL),
_OMAP3_BALLENTRY(ETK_D6, "af13", NULL),
_OMAP3_BALLENTRY(ETK_D7, "ah14", NULL),
_OMAP3_BALLENTRY(ETK_D8, "af9", NULL),
_OMAP3_BALLENTRY(ETK_D9, "ag9", NULL),
_OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"),
_OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"),
_OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"),
_OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"),
_OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"),
_OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"),
_OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"),
_OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"),
_OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
_OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
_OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
_OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
_OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
_OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
_OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
_OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
_OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
_OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"),
_OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
_OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
_OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
_OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
_OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
_OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL),
_OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
_OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
_OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
_OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
_OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
_OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
_OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
_OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL),
_OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL),
_OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
_OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
_OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
_OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
_OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
_OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
_OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL),
_OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL),
_OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
_OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
_OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
_OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
_OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
_OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
_OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL),
_OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL),
_OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL),
_OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL),
_OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL),
_OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL),
_OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL),
_OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL),
_OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL),
_OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL),
_OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL),
_OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL),
_OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL),
_OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL),
_OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL),
_OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL),
_OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL),
_OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL),
_OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL),
_OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL),
_OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL),
_OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL),
_OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL),
_OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL),
_OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL),
_OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL),
_OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL),
_OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL),
_OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL),
_OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT4, "p27", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT5, "p26", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT6, "r27", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT7, "r25", NULL),
_OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL),
_OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
_OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
_OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
_OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
_OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL),
_OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL),
_OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL),
_OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL),
_OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL),
_OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL),
_OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL),
_OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL),
_OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL),
_OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL),
_OMAP3_BALLENTRY(UART1_CTS, "w8", NULL),
_OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL),
_OMAP3_BALLENTRY(UART1_RX, "y8", NULL),
_OMAP3_BALLENTRY(UART1_TX, "aa8", NULL),
_OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL),
_OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL),
_OMAP3_BALLENTRY(UART2_RX, "ad25", NULL),
_OMAP3_BALLENTRY(UART2_TX, "aa25", NULL),
_OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL),
_OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL),
_OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL),
_OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define omap3_cbb_ball NULL
#endif
omap: mux: Add 36xx CBP package support Add 36xx CBP package support Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:33 +03:00
/*
* Signals different on 36XX CBP package comapared to 34XX CBC package
*/
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP)
OMAP: mach-omap2: Fix static declaration warnings This patch fixes sparse warnings due to non declaration of static structures and variables. Sparse warning logs fixed: arch/arm/mach-omap2/control.c:88:6: warning: symbol 'omap3_secure_ram_storage' was not declared. Should it be static? n arch/arm/mach-omap2/timer-gp.c:50:22: warning: symbol 'gptimer_wakeup' was not declared. Should it be static? arch/arm/mach-omap2/timer-gp.c:240:18: warning: symbol 'omap_timer' was not declared. Should it be static? arch/arm/mach-omap2/prcm.c:121:24: warning: symbol 'prcm_context' was not declared. Should it be static? arch/arm/mach-omap2/mux2420.c:510:29: warning: symbol 'omap2420_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux2430.c:589:29: warning: symbol 'omap2430_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:934:28: warning: symbol 'omap3_cus_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1080:29: warning: symbol 'omap3_cus_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1272:28: warning: symbol 'omap3_cbb_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1393:29: warning: symbol 'omap3_cbb_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1603:28: warning: symbol 'omap36xx_cbp_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1821:29: warning: symbol 'omap36xx_cbp_ball' was not declared. Should it be static? arch/arm/mach-omap2/pm-debug.c:165:15: warning: symbol 'pm_dbg_dir' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:587:30: warning: symbol 'ads7846_config' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:606:23: warning: symbol 'omap3evm_spi_board_info' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:46:25: warning: symbol 'rx51_sdrc_params' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:211:25: warning: symbol 'rx51_get_sdram_timings' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3touchbook.c:64:15: warning: symbol 'touchbook_revision' was not declared. Should it be static? arch/arm/mach-omap2/board-am3517evm.c:350:24: warning: symbol 'am3517_evm_dss_device' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3stalker.c:567:23: warning: symbol 'omap3stalker_spi_board_info' was not declared. Should it be static? Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-08 20:56:37 +04:00
static struct omap_mux __initdata omap36xx_cbp_subset[] = {
omap: mux: Add 36xx CBP package support Add 36xx CBP package support Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:33 +03:00
_OMAP3_MUXENTRY(CAM_D0, 99,
"cam_d0", NULL, "csi2_dx2", NULL,
"gpio_99", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D1, 100,
"cam_d1", NULL, "csi2_dy2", NULL,
"gpio_100", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D10, 109,
"cam_d10", "ssi2_wake", NULL, NULL,
"gpio_109", "hw_dbg8", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D2, 101,
"cam_d2", "ssi2_rdy_tx", NULL, NULL,
"gpio_101", "hw_dbg4", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D3, 102,
"cam_d3", "ssi2_dat_rx", NULL, NULL,
"gpio_102", "hw_dbg5", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D4, 103,
"cam_d4", "ssi2_flag_rx", NULL, NULL,
"gpio_103", "hw_dbg6", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_D5, 104,
"cam_d5", "ssi2_rdy_rx", NULL, NULL,
"gpio_104", "hw_dbg7", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_HS, 94,
"cam_hs", "ssi2_dat_tx", NULL, NULL,
"gpio_94", "hw_dbg0", NULL, "safe_mode"),
_OMAP3_MUXENTRY(CAM_VS, 95,
"cam_vs", "ssi2_flag_tx", NULL, NULL,
"gpio_95", "hw_dbg1", NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA0, 70,
"dss_data0", "dsi_dx0", "uart1_cts", NULL,
"gpio_70", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA1, 71,
"dss_data1", "dsi_dy0", "uart1_rts", NULL,
"gpio_71", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA2, 72,
"dss_data2", "dsi_dx1", NULL, NULL,
"gpio_72", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA3, 73,
"dss_data3", "dsi_dy1", NULL, NULL,
"gpio_73", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA4, 74,
"dss_data4", "dsi_dx2", "uart3_rx_irrx", NULL,
"gpio_74", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA5, 75,
"dss_data5", "dsi_dy2", "uart3_tx_irtx", NULL,
"gpio_75", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA6, 76,
"dss_data6", NULL, "uart1_tx", "dssvenc656_data6",
"gpio_76", "hw_dbg14", NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA7, 77,
"dss_data7", NULL, "uart1_rx", "dssvenc656_data7",
"gpio_77", "hw_dbg15", NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA8, 78,
"dss_data8", NULL, "uart3_rx_irrx", NULL,
"gpio_78", "hw_dbg16", NULL, "safe_mode"),
_OMAP3_MUXENTRY(DSS_DATA9, 79,
"dss_data9", NULL, "uart3_tx_irtx", NULL,
"gpio_79", "hw_dbg17", NULL, "safe_mode"),
_OMAP3_MUXENTRY(ETK_D12, 26,
"etk_d12", "sys_drm_msecure", NULL, "hsusb2_dir",
"gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"),
_OMAP3_MUXENTRY(GPMC_A11, 0,
"gpmc_a11", NULL, NULL, NULL,
NULL, NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_WAIT2, 64,
"gpmc_wait2", NULL, "uart4_tx", NULL,
"gpio_64", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(GPMC_WAIT3, 65,
"gpmc_wait3", "sys_ndmareq1", "uart4_rx", NULL,
"gpio_65", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_DATA0, 125,
"hsusb0_data0", NULL, "uart3_tx_irtx", NULL,
"gpio_125", "uart2_tx", NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_DATA1, 130,
"hsusb0_data1", NULL, "uart3_rx_irrx", NULL,
"gpio_130", "uart2_rx", NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_DATA2, 131,
"hsusb0_data2", NULL, "uart3_rts_sd", NULL,
"gpio_131", "uart2_rts", NULL, "safe_mode"),
_OMAP3_MUXENTRY(HSUSB0_DATA3, 169,
"hsusb0_data3", NULL, "uart3_cts_rctx", NULL,
"gpio_169", "uart2_cts", NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP1_CLKR, 156,
"mcbsp1_clkr", "mcspi4_clk", "sim_cd", NULL,
"gpio_156", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP1_FSR, 157,
"mcbsp1_fsr", "adpllv2d_dithering_en1",
"cam_global_reset", NULL,
"gpio_157", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(MCBSP4_CLKX, 152,
"mcbsp4_clkx", "ssi1_dat_rx", NULL, NULL,
"gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"),
_OMAP3_MUXENTRY(MCBSP4_DR, 153,
"mcbsp4_dr", "ssi1_flag_rx", NULL, NULL,
"gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"),
_OMAP3_MUXENTRY(MCBSP4_DX, 154,
"mcbsp4_dx", "ssi1_rdy_rx", NULL, NULL,
"gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"),
_OMAP3_MUXENTRY(MCBSP4_FSX, 155,
"mcbsp4_fsx", "ssi1_wake", NULL, NULL,
"gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"),
_OMAP3_MUXENTRY(MCSPI1_CS1, 175,
"mcspi1_cs1", "adpllv2d_dithering_en2", NULL, "sdmmc3_cmd",
"gpio_175", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
"sad2d_mbusflag", "mad2d_sbusflag", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
"sad2d_mcad28", "mad2d_mcad28", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
"sad2d_mcad29", "mad2d_mcad29", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
"sad2d_mcad32", "mad2d_mcad32", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
"sad2d_mcad33", "mad2d_mcad33", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
"sad2d_mcad34", "mad2d_mcad34", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
"sad2d_mcad35", "mad2d_mcad35", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
"sad2d_mcad36", "mad2d_mcad36", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MREAD, 0,
"sad2d_mread", "mad2d_sread", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
"sad2d_mwrite", "mad2d_swrite", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
"sad2d_sbusflag", "mad2d_mbusflag", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_SREAD, 0,
"sad2d_sread", "mad2d_mread", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
"sad2d_swrite", "mad2d_mwrite", NULL, NULL,
NULL, NULL, NULL, NULL),
_OMAP3_MUXENTRY(SDMMC1_CLK, 120,
"sdmmc1_clk", "ms_clk", NULL, NULL,
"gpio_120", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC1_CMD, 121,
"sdmmc1_cmd", "ms_bs", NULL, NULL,
"gpio_121", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC1_DAT0, 122,
"sdmmc1_dat0", "ms_dat0", NULL, NULL,
"gpio_122", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC1_DAT1, 123,
"sdmmc1_dat1", "ms_dat1", NULL, NULL,
"gpio_123", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC1_DAT2, 124,
"sdmmc1_dat2", "ms_dat2", NULL, NULL,
"gpio_124", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDMMC1_DAT3, 125,
"sdmmc1_dat3", "ms_dat3", NULL, NULL,
"gpio_125", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SDRC_CKE0, 0,
"sdrc_cke0", NULL, NULL, NULL,
NULL, NULL, NULL, "safe_mode_out1"),
_OMAP3_MUXENTRY(SDRC_CKE1, 0,
"sdrc_cke1", NULL, NULL, NULL,
NULL, NULL, NULL, "safe_mode_out1"),
_OMAP3_MUXENTRY(SIM_IO, 126,
"sim_io", "sim_io_low_impedance", NULL, NULL,
"gpio_126", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SIM_CLK, 127,
"sim_clk", NULL, NULL, NULL,
"gpio_127", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SIM_PWRCTRL, 128,
"sim_pwrctrl", NULL, NULL, NULL,
"gpio_128", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SIM_RST, 129,
"sim_rst", NULL, NULL, NULL,
"gpio_129", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_BOOT0, 2,
"sys_boot0", NULL, NULL, "dss_data18",
"gpio_2", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_BOOT1, 3,
"sys_boot1", NULL, NULL, "dss_data19",
"gpio_3", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_BOOT3, 5,
"sys_boot3", NULL, NULL, "dss_data20",
"gpio_5", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_BOOT4, 6,
"sys_boot4", "sdmmc2_dir_dat2", NULL, "dss_data21",
"gpio_6", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_BOOT5, 7,
"sys_boot5", "sdmmc2_dir_dat3", NULL, "dss_data22",
"gpio_7", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(SYS_BOOT6, 8,
"sys_boot6", NULL, NULL, "dss_data23",
"gpio_8", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_CTS, 150,
"uart1_cts", "ssi1_rdy_tx", NULL, NULL,
"gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_RTS, 149,
"uart1_rts", "ssi1_flag_tx", NULL, NULL,
"gpio_149", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_TX, 148,
"uart1_tx", "ssi1_dat_tx", NULL, NULL,
"gpio_148", NULL, NULL, "safe_mode"),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define omap36xx_cbp_subset NULL
#endif
/*
* Balls for 36XX CBP package
* 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom)
*/
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \
&& defined (CONFIG_OMAP_PACKAGE_CBP)
OMAP: mach-omap2: Fix static declaration warnings This patch fixes sparse warnings due to non declaration of static structures and variables. Sparse warning logs fixed: arch/arm/mach-omap2/control.c:88:6: warning: symbol 'omap3_secure_ram_storage' was not declared. Should it be static? n arch/arm/mach-omap2/timer-gp.c:50:22: warning: symbol 'gptimer_wakeup' was not declared. Should it be static? arch/arm/mach-omap2/timer-gp.c:240:18: warning: symbol 'omap_timer' was not declared. Should it be static? arch/arm/mach-omap2/prcm.c:121:24: warning: symbol 'prcm_context' was not declared. Should it be static? arch/arm/mach-omap2/mux2420.c:510:29: warning: symbol 'omap2420_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux2430.c:589:29: warning: symbol 'omap2430_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:934:28: warning: symbol 'omap3_cus_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1080:29: warning: symbol 'omap3_cus_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1272:28: warning: symbol 'omap3_cbb_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1393:29: warning: symbol 'omap3_cbb_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1603:28: warning: symbol 'omap36xx_cbp_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1821:29: warning: symbol 'omap36xx_cbp_ball' was not declared. Should it be static? arch/arm/mach-omap2/pm-debug.c:165:15: warning: symbol 'pm_dbg_dir' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:587:30: warning: symbol 'ads7846_config' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:606:23: warning: symbol 'omap3evm_spi_board_info' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:46:25: warning: symbol 'rx51_sdrc_params' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:211:25: warning: symbol 'rx51_get_sdram_timings' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3touchbook.c:64:15: warning: symbol 'touchbook_revision' was not declared. Should it be static? arch/arm/mach-omap2/board-am3517evm.c:350:24: warning: symbol 'am3517_evm_dss_device' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3stalker.c:567:23: warning: symbol 'omap3stalker_spi_board_info' was not declared. Should it be static? Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-08 20:56:37 +04:00
static struct omap_ball __initdata omap36xx_cbp_ball[] = {
omap: mux: Add 36xx CBP package support Add 36xx CBP package support Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:33 +03:00
_OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
_OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
_OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
_OMAP3_BALLENTRY(CAM_D11, "c26", NULL),
_OMAP3_BALLENTRY(CAM_D2, "b24", NULL),
_OMAP3_BALLENTRY(CAM_D3, "c24", NULL),
_OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
_OMAP3_BALLENTRY(CAM_D5, "a25", NULL),
_OMAP3_BALLENTRY(CAM_D6, "k28", NULL),
_OMAP3_BALLENTRY(CAM_D7, "l28", NULL),
_OMAP3_BALLENTRY(CAM_D8, "k27", NULL),
_OMAP3_BALLENTRY(CAM_D9, "l27", NULL),
_OMAP3_BALLENTRY(CAM_FLD, "c23", NULL),
_OMAP3_BALLENTRY(CAM_HS, "a24", NULL),
_OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL),
_OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL),
_OMAP3_BALLENTRY(CAM_VS, "a23", NULL),
_OMAP3_BALLENTRY(CAM_WEN, "b23", NULL),
_OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
_OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL),
_OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL),
_OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL),
_OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL),
_OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL),
_OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL),
_OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL),
_OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL),
_OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL),
_OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL),
_OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL),
_OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL),
_OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL),
_OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL),
_OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL),
_OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL),
_OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL),
_OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL),
_OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL),
_OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL),
_OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL),
_OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL),
_OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL),
_OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL),
_OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL),
_OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL),
_OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL),
_OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL),
_OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL),
_OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL),
_OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL),
_OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL),
_OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL),
_OMAP3_BALLENTRY(ETK_CLK, "af10", NULL),
_OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL),
_OMAP3_BALLENTRY(ETK_D0, "af11", NULL),
_OMAP3_BALLENTRY(ETK_D1, "ag12", NULL),
_OMAP3_BALLENTRY(ETK_D10, "ae7", NULL),
_OMAP3_BALLENTRY(ETK_D11, "af7", NULL),
_OMAP3_BALLENTRY(ETK_D12, "ag7", NULL),
_OMAP3_BALLENTRY(ETK_D13, "ah7", NULL),
_OMAP3_BALLENTRY(ETK_D14, "ag8", NULL),
_OMAP3_BALLENTRY(ETK_D15, "ah8", NULL),
_OMAP3_BALLENTRY(ETK_D2, "ah12", NULL),
_OMAP3_BALLENTRY(ETK_D3, "ae13", NULL),
_OMAP3_BALLENTRY(ETK_D4, "ae11", NULL),
_OMAP3_BALLENTRY(ETK_D5, "ah9", NULL),
_OMAP3_BALLENTRY(ETK_D6, "af13", NULL),
_OMAP3_BALLENTRY(ETK_D7, "ah14", NULL),
_OMAP3_BALLENTRY(ETK_D8, "af9", NULL),
_OMAP3_BALLENTRY(ETK_D9, "ag9", NULL),
_OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"),
_OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"),
_OMAP3_BALLENTRY(GPMC_A11, NULL, "ac20"),
_OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"),
_OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"),
_OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"),
_OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"),
_OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"),
_OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"),
_OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
_OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
_OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
_OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
_OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
_OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
_OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
_OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
_OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
_OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
_OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
_OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
_OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
_OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
_OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL),
_OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
_OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
_OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
_OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
_OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
_OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
_OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
_OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL),
_OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL),
_OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL),
_OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
_OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
_OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
_OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
_OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
_OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
_OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL),
_OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL),
_OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
_OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
_OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
_OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
_OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
_OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
_OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL),
_OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL),
_OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL),
_OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL),
_OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL),
_OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL),
_OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL),
_OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL),
_OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL),
_OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL),
_OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL),
_OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL),
_OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL),
_OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL),
_OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL),
_OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL),
_OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL),
_OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL),
_OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL),
_OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL),
_OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL),
_OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL),
_OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL),
_OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL),
_OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL),
_OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL),
_OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL),
_OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL),
_OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL),
_OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL),
_OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL),
_OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL),
_OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
_OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
_OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"),
_OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"),
_OMAP3_BALLENTRY(SIM_CLK, "p26", NULL),
_OMAP3_BALLENTRY(SIM_IO, "p27", NULL),
_OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL),
_OMAP3_BALLENTRY(SIM_RST, "r25", NULL),
_OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
_OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
_OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
_OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL),
_OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL),
_OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL),
_OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL),
_OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL),
_OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL),
_OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL),
_OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL),
_OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL),
_OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL),
_OMAP3_BALLENTRY(UART1_CTS, "w8", NULL),
_OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL),
_OMAP3_BALLENTRY(UART1_RX, "y8", NULL),
_OMAP3_BALLENTRY(UART1_TX, "aa8", NULL),
_OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL),
_OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL),
_OMAP3_BALLENTRY(UART2_RX, "ad25", NULL),
_OMAP3_BALLENTRY(UART2_TX, "aa25", NULL),
_OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL),
_OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL),
_OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL),
_OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define omap36xx_cbp_ball NULL
#endif
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
{
struct omap_mux *package_subset;
struct omap_ball *package_balls;
switch (flags & OMAP_PACKAGE_MASK) {
omap: mux: Remove unncessary parens from mux34xx.c Remove unncessary parens from mux34xx.c Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 17:31:36 +04:00
case OMAP_PACKAGE_CBC:
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
package_subset = omap3_cbc_subset;
package_balls = omap3_cbc_ball;
break;
omap: mux: Remove unncessary parens from mux34xx.c Remove unncessary parens from mux34xx.c Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 17:31:36 +04:00
case OMAP_PACKAGE_CBB:
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
package_subset = omap3_cbb_subset;
package_balls = omap3_cbb_ball;
break;
omap: mux: Remove unncessary parens from mux34xx.c Remove unncessary parens from mux34xx.c Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 17:31:36 +04:00
case OMAP_PACKAGE_CUS:
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
package_subset = omap3_cus_subset;
package_balls = omap3_cus_ball;
break;
omap: mux: Remove unncessary parens from mux34xx.c Remove unncessary parens from mux34xx.c Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 17:31:36 +04:00
case OMAP_PACKAGE_CBP:
omap: mux: Add 36xx CBP package support Add 36xx CBP package support Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:33 +03:00
package_subset = omap36xx_cbp_subset;
package_balls = omap36xx_cbp_ball;
break;
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
default:
OMAP: mux: Add __func__ macro to pr_xxx macros Removed mux: and added the __func__ macro to make debugging easier. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com>
2010-11-15 18:50:50 +03:00
pr_err("%s Unknown omap package, mux disabled\n", __func__);
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
return -EINVAL;
}
OMAP2+: mux: Fixed gpio mux mode analysis OMAP_MODE_GPIO() macro verified only OMAP_MUX_MODE4. It is not correct for following platforms: 2430 - gpio mux mode 3 44xx - gpio mux mode 3 54xx - gpio mux mode 6 Patch reserves first 3 bits in partition flags for storing gpio mux mode in same format as stored in control pad register. Modified OMAP_MODE_GPIO() macro to handle all possible cases of gpio mux mode. Modified omap_mux_init() flags of omap34xx to include OMAP_MUX_GPIO_IN_MODE4. Signed-off-by: Oleg Matcovschi <oleg.matcovschi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-27 05:02:03 +04:00
return omap_mux_init("core", OMAP_MUX_GPIO_IN_MODE4,
OMAP: mux: Add support for control module split in several partitions Starting on OMAP4, the pin mux configuration is located in two different partitions of the control module (CODE_PAD and WKUP_PAD). The first one is inside the core power domain whereas the second one is inside the wakeup. - Add the capability to add any number of partition during board init time depending of Soc partitioning. - Add some init flags as well in order to avoid explicit Soc version check inside the mux core code. - Add a comment with mux0 mode on top of omap_mux/board/<partition> if the current mux mode is not the default one. Thanks to Tony Lindgren <tony@atomide.com> for the following improvements: - Add omap_mux_get for getting the partition data so platform level device code can use it. - Fix the rx51 board code to use the new API. - Do not store the partition for each mux entry. Look up the partition for debugfs instead. Thanks to Dan Murphy <dmurphy@ti.com> for testing on OMAP4 and reporting a couple of bugs. Thanks to Anand Gadiyar <gadiyar@ti.com> for testing on OMAP3 zoom and bug report. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Murphy Dan <dmurphy@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Anand Gadiyar <gadiyar@ti.com>
2010-08-16 12:55:35 +04:00
OMAP3_CONTROL_PADCONF_MUX_PBASE,
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
OMAP3_CONTROL_PADCONF_MUX_SIZE,
OMAP: mux: Add support for control module split in several partitions Starting on OMAP4, the pin mux configuration is located in two different partitions of the control module (CODE_PAD and WKUP_PAD). The first one is inside the core power domain whereas the second one is inside the wakeup. - Add the capability to add any number of partition during board init time depending of Soc partitioning. - Add some init flags as well in order to avoid explicit Soc version check inside the mux core code. - Add a comment with mux0 mode on top of omap_mux/board/<partition> if the current mux mode is not the default one. Thanks to Tony Lindgren <tony@atomide.com> for the following improvements: - Add omap_mux_get for getting the partition data so platform level device code can use it. - Fix the rx51 board code to use the new API. - Do not store the partition for each mux entry. Look up the partition for debugfs instead. Thanks to Dan Murphy <dmurphy@ti.com> for testing on OMAP4 and reporting a couple of bugs. Thanks to Anand Gadiyar <gadiyar@ti.com> for testing on OMAP3 zoom and bug report. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Murphy Dan <dmurphy@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Anand Gadiyar <gadiyar@ti.com>
2010-08-16 12:55:35 +04:00
omap3_muxmodes, package_subset, board_subset,
package_balls);
omap: mux: Add new style pin multiplexing data for 34xx Add new style mux data for 34xx. This should also work with 3630 easily by adding the processor subset and ball data. Note that this data is __initdata, and gets optimized out except for the GPIO pins if CONFIG_OMAP_MUX is not set. Also note that this data uses omap3630 naming for the SDMMC registers instead of 34xx naming with just MMC. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-12 03:16:32 +03:00
}
Reference in New Issue Copy Permalink