iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
c08e7e4c8a
linux/drivers/pinctrl/cirrus/pinctrl-madera-core.c

1078 lines
26 KiB
C
Raw Normal View History

pinctrl: madera: Add driver for Cirrus Logic Madera codecs These codecs have a variable number of I/O lines each of which is individually selectable to a wide range of possible functions. The functionality is slightly different from the traditional muxed GPIO since most of the functions can be mapped to any pin (and even the same function to multiple pins). Most pins have a dedicated "alternate" function that is only available on that pin. The alternate functions are usually a group of signals, though it is not always necessary to enable the full group, depending on the alternate function and how it is to be used. The mapping between alternate functions and GPIO pins varies between codecs depending on the number of alternate functions and available pins. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-21 13:00:01 +03:00
// SPDX-License-Identifier: GPL-2.0
/*
* Pinctrl for Cirrus Logic Madera codecs
*
* Copyright (C) 2016-2018 Cirrus Logic
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by the
* Free Software Foundation; version 2.
*/
#include <linux/err.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
pinctrl: remove pinctrl/machine.h inclusion from pinctrl/pinconf.h The change adds explicit inclusion of linux/pinctrl/machine.h header to the only needed pinctrl-madera-core.c file, and therefore inclusion of pinctrl/machine.h header from pinctrl/pinconf.h can be removed. The change is preparatory to a follow-up reversal of commit f07512e615dd ("pinctrl/pinconfig: add debug interface"). Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-23 00:18:21 +03:00
#include <linux/pinctrl/machine.h>
pinctrl: madera: Add driver for Cirrus Logic Madera codecs These codecs have a variable number of I/O lines each of which is individually selectable to a wide range of possible functions. The functionality is slightly different from the traditional muxed GPIO since most of the functions can be mapped to any pin (and even the same function to multiple pins). Most pins have a dedicated "alternate" function that is only available on that pin. The alternate functions are usually a group of signals, though it is not always necessary to enable the full group, depending on the alternate function and how it is to be used. The mapping between alternate functions and GPIO pins varies between codecs depending on the number of alternate functions and available pins. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-21 13:00:01 +03:00
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/mfd/madera/core.h>
#include <linux/mfd/madera/registers.h>
#include "../pinctrl-utils.h"
#include "pinctrl-madera.h"
/*
* Use pin GPIO names for consistency
* NOTE: IDs are zero-indexed for coding convenience
*/
static const struct pinctrl_pin_desc madera_pins[] = {
PINCTRL_PIN(0, "gpio1"),
PINCTRL_PIN(1, "gpio2"),
PINCTRL_PIN(2, "gpio3"),
PINCTRL_PIN(3, "gpio4"),
PINCTRL_PIN(4, "gpio5"),
PINCTRL_PIN(5, "gpio6"),
PINCTRL_PIN(6, "gpio7"),
PINCTRL_PIN(7, "gpio8"),
PINCTRL_PIN(8, "gpio9"),
PINCTRL_PIN(9, "gpio10"),
PINCTRL_PIN(10, "gpio11"),
PINCTRL_PIN(11, "gpio12"),
PINCTRL_PIN(12, "gpio13"),
PINCTRL_PIN(13, "gpio14"),
PINCTRL_PIN(14, "gpio15"),
PINCTRL_PIN(15, "gpio16"),
PINCTRL_PIN(16, "gpio17"),
PINCTRL_PIN(17, "gpio18"),
PINCTRL_PIN(18, "gpio19"),
PINCTRL_PIN(19, "gpio20"),
PINCTRL_PIN(20, "gpio21"),
PINCTRL_PIN(21, "gpio22"),
PINCTRL_PIN(22, "gpio23"),
PINCTRL_PIN(23, "gpio24"),
PINCTRL_PIN(24, "gpio25"),
PINCTRL_PIN(25, "gpio26"),
PINCTRL_PIN(26, "gpio27"),
PINCTRL_PIN(27, "gpio28"),
PINCTRL_PIN(28, "gpio29"),
PINCTRL_PIN(29, "gpio30"),
PINCTRL_PIN(30, "gpio31"),
PINCTRL_PIN(31, "gpio32"),
PINCTRL_PIN(32, "gpio33"),
PINCTRL_PIN(33, "gpio34"),
PINCTRL_PIN(34, "gpio35"),
PINCTRL_PIN(35, "gpio36"),
PINCTRL_PIN(36, "gpio37"),
PINCTRL_PIN(37, "gpio38"),
PINCTRL_PIN(38, "gpio39"),
PINCTRL_PIN(39, "gpio40"),
};
/*
* All single-pin functions can be mapped to any GPIO, however pinmux applies
* functions to pin groups and only those groups declared as supporting that
* function. To make this work we must put each pin in its own dummy group so
* that the functions can be described as applying to all pins.
* Since these do not correspond to anything in the actual hardware - they are
* merely an adaptation to pinctrl's view of the world - we use the same name
* as the pin to avoid confusion when comparing with datasheet instructions
*/
static const char * const madera_pin_single_group_names[] = {
"gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
"gpio36", "gpio37", "gpio38", "gpio39", "gpio40",
};
/* set of pin numbers for single-pin groups, zero-indexed */
static const unsigned int madera_pin_single_group_pins[] = {
0, 1, 2, 3, 4, 5, 6,
7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20,
21, 22, 23, 24, 25, 26, 27,
28, 29, 30, 31, 32, 33, 34,
35, 36, 37, 38, 39,
};
static const char * const madera_aif1_group_names[] = { "aif1" };
static const char * const madera_aif2_group_names[] = { "aif2" };
static const char * const madera_aif3_group_names[] = { "aif3" };
static const char * const madera_aif4_group_names[] = { "aif4" };
static const char * const madera_mif1_group_names[] = { "mif1" };
static const char * const madera_mif2_group_names[] = { "mif2" };
static const char * const madera_mif3_group_names[] = { "mif3" };
static const char * const madera_dmic3_group_names[] = { "dmic3" };
static const char * const madera_dmic4_group_names[] = { "dmic4" };
static const char * const madera_dmic5_group_names[] = { "dmic5" };
static const char * const madera_dmic6_group_names[] = { "dmic6" };
static const char * const madera_spk1_group_names[] = { "pdmspk1" };
static const char * const madera_spk2_group_names[] = { "pdmspk2" };
/*
* alt-functions always apply to a single pin group, other functions always
* apply to all pins
*/
static const struct {
const char *name;
const char * const *group_names;
u32 func;
} madera_mux_funcs[] = {
{
.name = "aif1",
.group_names = madera_aif1_group_names,
.func = 0x000
},
{
.name = "aif2",
.group_names = madera_aif2_group_names,
.func = 0x000
},
{
.name = "aif3",
.group_names = madera_aif3_group_names,
.func = 0x000
},
{
.name = "aif4",
.group_names = madera_aif4_group_names,
.func = 0x000
},
{
.name = "mif1",
.group_names = madera_mif1_group_names,
.func = 0x000
},
{
.name = "mif2",
.group_names = madera_mif2_group_names,
.func = 0x000
},
{
.name = "mif3",
.group_names = madera_mif3_group_names,
.func = 0x000
},
{
.name = "dmic3",
.group_names = madera_dmic3_group_names,
.func = 0x000
},
{
.name = "dmic4",
.group_names = madera_dmic4_group_names,
.func = 0x000
},
{
.name = "dmic5",
.group_names = madera_dmic5_group_names,
.func = 0x000
},
{
.name = "dmic6",
.group_names = madera_dmic6_group_names,
.func = 0x000
},
{
.name = "pdmspk1",
.group_names = madera_spk1_group_names,
.func = 0x000
},
{
.name = "pdmspk2",
.group_names = madera_spk2_group_names,
.func = 0x000
},
{
.name = "io",
.group_names = madera_pin_single_group_names,
.func = 0x001
},
{
.name = "dsp-gpio",
.group_names = madera_pin_single_group_names,
.func = 0x002
},
{
.name = "irq1",
.group_names = madera_pin_single_group_names,
.func = 0x003
},
{
.name = "irq2",
.group_names = madera_pin_single_group_names,
.func = 0x004
},
{
.name = "fll1-clk",
.group_names = madera_pin_single_group_names,
.func = 0x010
},
{
.name = "fll2-clk",
.group_names = madera_pin_single_group_names,
.func = 0x011
},
{
.name = "fll3-clk",
.group_names = madera_pin_single_group_names,
.func = 0x012
},
{
.name = "fllao-clk",
.group_names = madera_pin_single_group_names,
.func = 0x013
},
{
.name = "fll1-lock",
.group_names = madera_pin_single_group_names,
.func = 0x018
},
{
.name = "fll2-lock",
.group_names = madera_pin_single_group_names,
.func = 0x019
},
{
.name = "fll3-lock",
.group_names = madera_pin_single_group_names,
.func = 0x01a
},
{
.name = "fllao-lock",
.group_names = madera_pin_single_group_names,
.func = 0x01b
},
{
.name = "opclk",
.group_names = madera_pin_single_group_names,
.func = 0x040
},
{
.name = "opclk-async",
.group_names = madera_pin_single_group_names,
.func = 0x041
},
{
.name = "pwm1",
.group_names = madera_pin_single_group_names,
.func = 0x048
},
{
.name = "pwm2",
.group_names = madera_pin_single_group_names,
.func = 0x049
},
{
.name = "spdif",
.group_names = madera_pin_single_group_names,
.func = 0x04c
},
{
.name = "asrc1-in1-lock",
.group_names = madera_pin_single_group_names,
.func = 0x088
},
{
.name = "asrc1-in2-lock",
.group_names = madera_pin_single_group_names,
.func = 0x089
},
{
.name = "asrc2-in1-lock",
.group_names = madera_pin_single_group_names,
.func = 0x08a
},
{
.name = "asrc2-in2-lock",
.group_names = madera_pin_single_group_names,
.func = 0x08b
},
{
.name = "spkl-short-circuit",
.group_names = madera_pin_single_group_names,
.func = 0x0b6
},
{
.name = "spkr-short-circuit",
.group_names = madera_pin_single_group_names,
.func = 0x0b7
},
{
.name = "spk-shutdown",
.group_names = madera_pin_single_group_names,
.func = 0x0e0
},
{
.name = "spk-overheat-shutdown",
.group_names = madera_pin_single_group_names,
.func = 0x0e1
},
{
.name = "spk-overheat-warn",
.group_names = madera_pin_single_group_names,
.func = 0x0e2
},
{
.name = "timer1-sts",
.group_names = madera_pin_single_group_names,
.func = 0x140
},
{
.name = "timer2-sts",
.group_names = madera_pin_single_group_names,
.func = 0x141
},
{
.name = "timer3-sts",
.group_names = madera_pin_single_group_names,
.func = 0x142
},
{
.name = "timer4-sts",
.group_names = madera_pin_single_group_names,
.func = 0x143
},
{
.name = "timer5-sts",
.group_names = madera_pin_single_group_names,
.func = 0x144
},
{
.name = "timer6-sts",
.group_names = madera_pin_single_group_names,
.func = 0x145
},
{
.name = "timer7-sts",
.group_names = madera_pin_single_group_names,
.func = 0x146
},
{
.name = "timer8-sts",
.group_names = madera_pin_single_group_names,
.func = 0x147
},
{
.name = "log1-fifo-ne",
.group_names = madera_pin_single_group_names,
.func = 0x150
},
{
.name = "log2-fifo-ne",
.group_names = madera_pin_single_group_names,
.func = 0x151
},
{
.name = "log3-fifo-ne",
.group_names = madera_pin_single_group_names,
.func = 0x152
},
{
.name = "log4-fifo-ne",
.group_names = madera_pin_single_group_names,
.func = 0x153
},
{
.name = "log5-fifo-ne",
.group_names = madera_pin_single_group_names,
.func = 0x154
},
{
.name = "log6-fifo-ne",
.group_names = madera_pin_single_group_names,
.func = 0x155
},
{
.name = "log7-fifo-ne",
.group_names = madera_pin_single_group_names,
.func = 0x156
},
{
.name = "log8-fifo-ne",
.group_names = madera_pin_single_group_names,
.func = 0x157
},
};
static u16 madera_pin_make_drv_str(struct madera_pin_private *priv,
unsigned int milliamps)
{
switch (milliamps) {
case 4:
return 0;
case 8:
return 2 << MADERA_GP1_DRV_STR_SHIFT;
default:
break;
}
dev_warn(priv->dev, "%u mA not a valid drive strength", milliamps);
return 0;
}
static unsigned int madera_pin_unmake_drv_str(struct madera_pin_private *priv,
u16 regval)
{
regval = (regval & MADERA_GP1_DRV_STR_MASK) >> MADERA_GP1_DRV_STR_SHIFT;
switch (regval) {
case 0:
return 4;
case 2:
return 8;
default:
return 0;
}
}
static int madera_get_groups_count(struct pinctrl_dev *pctldev)
{
struct madera_pin_private *priv = pinctrl_dev_get_drvdata(pctldev);
/* Number of alt function groups plus number of single-pin groups */
return priv->chip->n_pin_groups + priv->chip->n_pins;
}
static const char *madera_get_group_name(struct pinctrl_dev *pctldev,
unsigned int selector)
{
struct madera_pin_private *priv = pinctrl_dev_get_drvdata(pctldev);
if (selector < priv->chip->n_pin_groups)
return priv->chip->pin_groups[selector].name;
selector -= priv->chip->n_pin_groups;
return madera_pin_single_group_names[selector];
}
static int madera_get_group_pins(struct pinctrl_dev *pctldev,
unsigned int selector,
const unsigned int **pins,
unsigned int *num_pins)
{
struct madera_pin_private *priv = pinctrl_dev_get_drvdata(pctldev);
if (selector < priv->chip->n_pin_groups) {
*pins = priv->chip->pin_groups[selector].pins;
*num_pins = priv->chip->pin_groups[selector].n_pins;
} else {
/* return the dummy group for a single pin */
selector -= priv->chip->n_pin_groups;
*pins = &madera_pin_single_group_pins[selector];
*num_pins = 1;
}
return 0;
}
static void madera_pin_dbg_show_fn(struct madera_pin_private *priv,
struct seq_file *s,
unsigned int pin, unsigned int fn)
{
const struct madera_pin_chip *chip = priv->chip;
int i, g_pin;
if (fn != 0) {
for (i = 0; i < ARRAY_SIZE(madera_mux_funcs); ++i) {
if (madera_mux_funcs[i].func == fn) {
seq_printf(s, " FN=%s",
madera_mux_funcs[i].name);
return;
}
}
return; /* ignore unknown function values */
}
/* alt function */
for (i = 0; i < chip->n_pin_groups; ++i) {
for (g_pin = 0; g_pin < chip->pin_groups[i].n_pins; ++g_pin) {
if (chip->pin_groups[i].pins[g_pin] == pin) {
seq_printf(s, " FN=%s",
chip->pin_groups[i].name);
return;
}
}
}
}
static void __maybe_unused madera_pin_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s,
unsigned int pin)
{
struct madera_pin_private *priv = pinctrl_dev_get_drvdata(pctldev);
unsigned int conf[2];
unsigned int reg = MADERA_GPIO1_CTRL_1 + (2 * pin);
unsigned int fn;
int ret;
ret = regmap_read(priv->madera->regmap, reg, &conf[0]);
if (ret)
return;
ret = regmap_read(priv->madera->regmap, reg + 1, &conf[1]);
if (ret)
return;
seq_printf(s, "%04x:%04x", conf[0], conf[1]);
fn = (conf[0] & MADERA_GP1_FN_MASK) >> MADERA_GP1_FN_SHIFT;
madera_pin_dbg_show_fn(priv, s, pin, fn);
/* State of direction bit is only relevant if function==1 */
if (fn == 1) {
if (conf[1] & MADERA_GP1_DIR_MASK)
seq_puts(s, " IN");
else
seq_puts(s, " OUT");
}
if (conf[1] & MADERA_GP1_PU_MASK)
seq_puts(s, " PU");
if (conf[1] & MADERA_GP1_PD_MASK)
seq_puts(s, " PD");
if (conf[0] & MADERA_GP1_DB_MASK)
seq_puts(s, " DB");
if (conf[0] & MADERA_GP1_OP_CFG_MASK)
seq_puts(s, " OD");
else
seq_puts(s, " CMOS");
seq_printf(s, " DRV=%umA", madera_pin_unmake_drv_str(priv, conf[1]));
if (conf[0] & MADERA_GP1_IP_CFG_MASK)
pinctrl: madera: Fix missing space in debugfs output The SCHMITT tag was being dumped without a separating space. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-07 12:32:26 +03:00
seq_puts(s, " SCHMITT");
pinctrl: madera: Add driver for Cirrus Logic Madera codecs These codecs have a variable number of I/O lines each of which is individually selectable to a wide range of possible functions. The functionality is slightly different from the traditional muxed GPIO since most of the functions can be mapped to any pin (and even the same function to multiple pins). Most pins have a dedicated "alternate" function that is only available on that pin. The alternate functions are usually a group of signals, though it is not always necessary to enable the full group, depending on the alternate function and how it is to be used. The mapping between alternate functions and GPIO pins varies between codecs depending on the number of alternate functions and available pins. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-21 13:00:01 +03:00
}
static const struct pinctrl_ops madera_pin_group_ops = {
.get_groups_count = madera_get_groups_count,
.get_group_name = madera_get_group_name,
.get_group_pins = madera_get_group_pins,
#if IS_ENABLED(CONFIG_OF)
.dt_node_to_map = pinconf_generic_dt_node_to_map_all,
.dt_free_map = pinctrl_utils_free_map,
#endif
#if IS_ENABLED(CONFIG_DEBUG_FS)
.pin_dbg_show = madera_pin_dbg_show,
#endif
};
static int madera_mux_get_funcs_count(struct pinctrl_dev *pctldev)
{
return ARRAY_SIZE(madera_mux_funcs);
}
static const char *madera_mux_get_func_name(struct pinctrl_dev *pctldev,
unsigned int selector)
{
return madera_mux_funcs[selector].name;
}
static int madera_mux_get_groups(struct pinctrl_dev *pctldev,
unsigned int selector,
const char * const **groups,
unsigned int * const num_groups)
{
struct madera_pin_private *priv = pinctrl_dev_get_drvdata(pctldev);
*groups = madera_mux_funcs[selector].group_names;
if (madera_mux_funcs[selector].func == 0) {
/* alt func always maps to a single group */
*num_groups = 1;
} else {
/* other funcs map to all available gpio pins */
*num_groups = priv->chip->n_pins;
}
return 0;
}
static int madera_mux_set_mux(struct pinctrl_dev *pctldev,
unsigned int selector,
unsigned int group)
{
struct madera_pin_private *priv = pinctrl_dev_get_drvdata(pctldev);
struct madera *madera = priv->madera;
const struct madera_pin_groups *pin_group = priv->chip->pin_groups;
unsigned int n_chip_groups = priv->chip->n_pin_groups;
const char *func_name = madera_mux_funcs[selector].name;
unsigned int reg;
pinctrl: madera: Fix uninitialized variable bug in madera_mux_set_mux There is a potential execution path in which variable *ret* is checked in an IF statement, and then its value is used to report an error at line 659 without being properly initialized previously: 659 if (ret) 660 dev_err(priv->dev, "Failed to write to 0x%x (%d)\n", reg, ret); Fix this by initializing variable *ret* to 0 in order to avoid unpredictable or unintended results. Addresses-Coverity-ID: 1471969 ("Uninitialized scalar variable") Fixes: 218d72a77b0b ("pinctrl: madera: Add driver for Cirrus Logic Madera codecs") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-10 18:13:13 +03:00
int i, ret = 0;
pinctrl: madera: Add driver for Cirrus Logic Madera codecs These codecs have a variable number of I/O lines each of which is individually selectable to a wide range of possible functions. The functionality is slightly different from the traditional muxed GPIO since most of the functions can be mapped to any pin (and even the same function to multiple pins). Most pins have a dedicated "alternate" function that is only available on that pin. The alternate functions are usually a group of signals, though it is not always necessary to enable the full group, depending on the alternate function and how it is to be used. The mapping between alternate functions and GPIO pins varies between codecs depending on the number of alternate functions and available pins. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-21 13:00:01 +03:00
dev_dbg(priv->dev, "%s selecting %u (%s) for group %u (%s)\n",
__func__, selector, func_name, group,
madera_get_group_name(pctldev, group));
if (madera_mux_funcs[selector].func == 0) {
/* alt func pin assignments are codec-specific */
for (i = 0; i < n_chip_groups; ++i) {
if (strcmp(func_name, pin_group->name) == 0)
break;
++pin_group;
}
if (i == n_chip_groups)
return -EINVAL;
for (i = 0; i < pin_group->n_pins; ++i) {
reg = MADERA_GPIO1_CTRL_1 + (2 * pin_group->pins[i]);
dev_dbg(priv->dev, "%s setting 0x%x func bits to 0\n",
__func__, reg);
ret = regmap_update_bits(madera->regmap, reg,
MADERA_GP1_FN_MASK, 0);
if (ret)
break;
}
} else {
/*
* for other funcs the group will be the gpio number and will
* be offset by the number of chip-specific functions at the
* start of the group list
*/
group -= n_chip_groups;
reg = MADERA_GPIO1_CTRL_1 + (2 * group);
dev_dbg(priv->dev, "%s setting 0x%x func bits to 0x%x\n",
__func__, reg, madera_mux_funcs[selector].func);
ret = regmap_update_bits(madera->regmap,
reg,
MADERA_GP1_FN_MASK,
madera_mux_funcs[selector].func);
}
if (ret)
dev_err(priv->dev, "Failed to write to 0x%x (%d)\n", reg, ret);
return ret;
}
static int madera_gpio_set_direction(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset,
bool input)
{
struct madera_pin_private *priv = pinctrl_dev_get_drvdata(pctldev);
struct madera *madera = priv->madera;
unsigned int reg = MADERA_GPIO1_CTRL_2 + (2 * offset);
unsigned int val;
int ret;
if (input)
val = MADERA_GP1_DIR;
else
val = 0;
ret = regmap_update_bits(madera->regmap, reg, MADERA_GP1_DIR_MASK, val);
if (ret)
dev_err(priv->dev, "Failed to write to 0x%x (%d)\n", reg, ret);
return ret;
}
static int madera_gpio_request_enable(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset)
{
struct madera_pin_private *priv = pinctrl_dev_get_drvdata(pctldev);
struct madera *madera = priv->madera;
unsigned int reg = MADERA_GPIO1_CTRL_1 + (2 * offset);
int ret;
/* put the pin into GPIO mode */
ret = regmap_update_bits(madera->regmap, reg, MADERA_GP1_FN_MASK, 1);
if (ret)
dev_err(priv->dev, "Failed to write to 0x%x (%d)\n", reg, ret);
return ret;
}
static void madera_gpio_disable_free(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset)
{
struct madera_pin_private *priv = pinctrl_dev_get_drvdata(pctldev);
struct madera *madera = priv->madera;
unsigned int reg = MADERA_GPIO1_CTRL_1 + (2 * offset);
int ret;
/* disable GPIO by setting to GPIO IN */
madera_gpio_set_direction(pctldev, range, offset, true);
ret = regmap_update_bits(madera->regmap, reg, MADERA_GP1_FN_MASK, 1);
if (ret)
dev_err(priv->dev, "Failed to write to 0x%x (%d)\n", reg, ret);
}
static const struct pinmux_ops madera_pin_mux_ops = {
.get_functions_count = madera_mux_get_funcs_count,
.get_function_name = madera_mux_get_func_name,
.get_function_groups = madera_mux_get_groups,
.set_mux = madera_mux_set_mux,
.gpio_request_enable = madera_gpio_request_enable,
.gpio_disable_free = madera_gpio_disable_free,
.gpio_set_direction = madera_gpio_set_direction,
.strict = true, /* GPIO and other functions are exclusive */
};
static int madera_pin_conf_get(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *config)
{
struct madera_pin_private *priv = pinctrl_dev_get_drvdata(pctldev);
unsigned int param = pinconf_to_config_param(*config);
unsigned int result = 0;
unsigned int reg = MADERA_GPIO1_CTRL_1 + (2 * pin);
unsigned int conf[2];
int ret;
ret = regmap_read(priv->madera->regmap, reg, &conf[0]);
if (!ret)
ret = regmap_read(priv->madera->regmap, reg + 1, &conf[1]);
if (ret) {
dev_err(priv->dev, "Failed to read GP%d conf (%d)\n",
pin + 1, ret);
return ret;
}
switch (param) {
case PIN_CONFIG_BIAS_BUS_HOLD:
conf[1] &= MADERA_GP1_PU_MASK | MADERA_GP1_PD_MASK;
if (conf[1] == (MADERA_GP1_PU | MADERA_GP1_PD))
result = 1;
break;
case PIN_CONFIG_BIAS_DISABLE:
conf[1] &= MADERA_GP1_PU_MASK | MADERA_GP1_PD_MASK;
if (!conf[1])
result = 1;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
conf[1] &= MADERA_GP1_PU_MASK | MADERA_GP1_PD_MASK;
if (conf[1] == MADERA_GP1_PD_MASK)
result = 1;
break;
case PIN_CONFIG_BIAS_PULL_UP:
conf[1] &= MADERA_GP1_PU_MASK | MADERA_GP1_PD_MASK;
if (conf[1] == MADERA_GP1_PU_MASK)
result = 1;
break;
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
if (conf[0] & MADERA_GP1_OP_CFG_MASK)
result = 1;
break;
case PIN_CONFIG_DRIVE_PUSH_PULL:
if (!(conf[0] & MADERA_GP1_OP_CFG_MASK))
result = 1;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
result = madera_pin_unmake_drv_str(priv, conf[1]);
break;
case PIN_CONFIG_INPUT_DEBOUNCE:
if (conf[0] & MADERA_GP1_DB_MASK)
result = 1;
break;
case PIN_CONFIG_INPUT_ENABLE:
if (conf[0] & MADERA_GP1_DIR_MASK)
result = 1;
break;
case PIN_CONFIG_INPUT_SCHMITT:
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
if (conf[0] & MADERA_GP1_IP_CFG_MASK)
result = 1;
break;
case PIN_CONFIG_OUTPUT:
if ((conf[1] & MADERA_GP1_DIR_MASK) &&
(conf[0] & MADERA_GP1_LVL_MASK))
result = 1;
break;
default:
pinctrl: madera: Return ENOTSUPP for unsupported pin attributes The pin_config_[get|set] functions should return ENOTSUPP if the requested attribute isn't supported. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-07 12:32:25 +03:00
return -ENOTSUPP;
pinctrl: madera: Add driver for Cirrus Logic Madera codecs These codecs have a variable number of I/O lines each of which is individually selectable to a wide range of possible functions. The functionality is slightly different from the traditional muxed GPIO since most of the functions can be mapped to any pin (and even the same function to multiple pins). Most pins have a dedicated "alternate" function that is only available on that pin. The alternate functions are usually a group of signals, though it is not always necessary to enable the full group, depending on the alternate function and how it is to be used. The mapping between alternate functions and GPIO pins varies between codecs depending on the number of alternate functions and available pins. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-21 13:00:01 +03:00
}
*config = pinconf_to_config_packed(param, result);
return 0;
}
static int madera_pin_conf_set(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *configs, unsigned int num_configs)
{
struct madera_pin_private *priv = pinctrl_dev_get_drvdata(pctldev);
u16 conf[2] = {0, 0};
u16 mask[2] = {0, 0};
unsigned int reg = MADERA_GPIO1_CTRL_1 + (2 * pin);
unsigned int val;
int ret;
while (num_configs) {
dev_dbg(priv->dev, "%s config 0x%lx\n", __func__, *configs);
switch (pinconf_to_config_param(*configs)) {
case PIN_CONFIG_BIAS_BUS_HOLD:
mask[1] |= MADERA_GP1_PU_MASK | MADERA_GP1_PD_MASK;
conf[1] |= MADERA_GP1_PU | MADERA_GP1_PD;
break;
case PIN_CONFIG_BIAS_DISABLE:
mask[1] |= MADERA_GP1_PU_MASK | MADERA_GP1_PD_MASK;
conf[1] &= ~(MADERA_GP1_PU | MADERA_GP1_PD);
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
mask[1] |= MADERA_GP1_PU_MASK | MADERA_GP1_PD_MASK;
conf[1] |= MADERA_GP1_PD;
conf[1] &= ~MADERA_GP1_PU;
break;
case PIN_CONFIG_BIAS_PULL_UP:
mask[1] |= MADERA_GP1_PU_MASK | MADERA_GP1_PD_MASK;
conf[1] |= MADERA_GP1_PU;
conf[1] &= ~MADERA_GP1_PD;
break;
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
mask[0] |= MADERA_GP1_OP_CFG_MASK;
conf[0] |= MADERA_GP1_OP_CFG;
break;
case PIN_CONFIG_DRIVE_PUSH_PULL:
mask[0] |= MADERA_GP1_OP_CFG_MASK;
conf[0] &= ~MADERA_GP1_OP_CFG;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
val = pinconf_to_config_argument(*configs);
mask[1] |= MADERA_GP1_DRV_STR_MASK;
conf[1] &= ~MADERA_GP1_DRV_STR_MASK;
conf[1] |= madera_pin_make_drv_str(priv, val);
break;
case PIN_CONFIG_INPUT_DEBOUNCE:
mask[0] |= MADERA_GP1_DB_MASK;
/*
* we can't configure debounce time per-pin so value
* is just a flag
*/
val = pinconf_to_config_argument(*configs);
if (val)
conf[0] |= MADERA_GP1_DB;
else
conf[0] &= ~MADERA_GP1_DB;
break;
case PIN_CONFIG_INPUT_ENABLE:
val = pinconf_to_config_argument(*configs);
mask[1] |= MADERA_GP1_DIR_MASK;
if (val)
conf[1] |= MADERA_GP1_DIR;
else
conf[1] &= ~MADERA_GP1_DIR;
break;
case PIN_CONFIG_INPUT_SCHMITT:
val = pinconf_to_config_argument(*configs);
mask[0] |= MADERA_GP1_IP_CFG;
if (val)
conf[0] |= MADERA_GP1_IP_CFG;
else
conf[0] &= ~MADERA_GP1_IP_CFG;
mask[1] |= MADERA_GP1_DIR_MASK;
conf[1] |= MADERA_GP1_DIR;
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
mask[0] |= MADERA_GP1_IP_CFG;
conf[0] |= MADERA_GP1_IP_CFG;
mask[1] |= MADERA_GP1_DIR_MASK;
conf[1] |= MADERA_GP1_DIR;
break;
case PIN_CONFIG_OUTPUT:
val = pinconf_to_config_argument(*configs);
mask[0] |= MADERA_GP1_LVL_MASK;
if (val)
conf[0] |= MADERA_GP1_LVL;
else
conf[0] &= ~MADERA_GP1_LVL;
mask[1] |= MADERA_GP1_DIR_MASK;
conf[1] &= ~MADERA_GP1_DIR;
break;
default:
pinctrl: madera: Return ENOTSUPP for unsupported pin attributes The pin_config_[get|set] functions should return ENOTSUPP if the requested attribute isn't supported. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-07 12:32:25 +03:00
return -ENOTSUPP;
pinctrl: madera: Add driver for Cirrus Logic Madera codecs These codecs have a variable number of I/O lines each of which is individually selectable to a wide range of possible functions. The functionality is slightly different from the traditional muxed GPIO since most of the functions can be mapped to any pin (and even the same function to multiple pins). Most pins have a dedicated "alternate" function that is only available on that pin. The alternate functions are usually a group of signals, though it is not always necessary to enable the full group, depending on the alternate function and how it is to be used. The mapping between alternate functions and GPIO pins varies between codecs depending on the number of alternate functions and available pins. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-21 13:00:01 +03:00
}
++configs;
--num_configs;
}
dev_dbg(priv->dev,
"%s gpio%d 0x%x:0x%x 0x%x:0x%x\n",
__func__, pin + 1, reg, conf[0], reg + 1, conf[1]);
ret = regmap_update_bits(priv->madera->regmap, reg, mask[0], conf[0]);
if (ret)
goto err;
++reg;
ret = regmap_update_bits(priv->madera->regmap, reg, mask[1], conf[1]);
if (ret)
goto err;
return 0;
err:
dev_err(priv->dev,
"Failed to write GPIO%d conf (%d) reg 0x%x\n",
pin + 1, ret, reg);
return ret;
}
static int madera_pin_conf_group_set(struct pinctrl_dev *pctldev,
unsigned int selector,
unsigned long *configs,
unsigned int num_configs)
{
struct madera_pin_private *priv = pinctrl_dev_get_drvdata(pctldev);
const struct madera_pin_groups *pin_group;
unsigned int n_groups = priv->chip->n_pin_groups;
int i, ret;
dev_dbg(priv->dev, "%s setting group %s\n", __func__,
madera_get_group_name(pctldev, selector));
if (selector >= n_groups) {
/* group is a single pin, convert to pin number and set */
return madera_pin_conf_set(pctldev,
selector - n_groups,
configs,
num_configs);
} else {
pin_group = &priv->chip->pin_groups[selector];
for (i = 0; i < pin_group->n_pins; ++i) {
ret = madera_pin_conf_set(pctldev,
pin_group->pins[i],
configs,
num_configs);
if (ret)
return ret;
}
}
return 0;
}
static const struct pinconf_ops madera_pin_conf_ops = {
pinctrl: madera: Set is_generic We are using the generic pin configuration interface so we can set is_generic. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-07 12:32:24 +03:00
.is_generic = true,
pinctrl: madera: Add driver for Cirrus Logic Madera codecs These codecs have a variable number of I/O lines each of which is individually selectable to a wide range of possible functions. The functionality is slightly different from the traditional muxed GPIO since most of the functions can be mapped to any pin (and even the same function to multiple pins). Most pins have a dedicated "alternate" function that is only available on that pin. The alternate functions are usually a group of signals, though it is not always necessary to enable the full group, depending on the alternate function and how it is to be used. The mapping between alternate functions and GPIO pins varies between codecs depending on the number of alternate functions and available pins. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-21 13:00:01 +03:00
.pin_config_get = madera_pin_conf_get,
.pin_config_set = madera_pin_conf_set,
.pin_config_group_set = madera_pin_conf_group_set,
};
static struct pinctrl_desc madera_pin_desc = {
.name = "madera-pinctrl",
.pins = madera_pins,
.pctlops = &madera_pin_group_ops,
.pmxops = &madera_pin_mux_ops,
.confops = &madera_pin_conf_ops,
.owner = THIS_MODULE,
};
static int madera_pin_probe(struct platform_device *pdev)
{
struct madera *madera = dev_get_drvdata(pdev->dev.parent);
const struct madera_pdata *pdata = dev_get_platdata(madera->dev);
struct madera_pin_private *priv;
int ret;
BUILD_BUG_ON(ARRAY_SIZE(madera_pin_single_group_names) !=
ARRAY_SIZE(madera_pin_single_group_pins));
dev_dbg(&pdev->dev, "%s\n", __func__);
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->dev = &pdev->dev;
priv->madera = madera;
pdev->dev.of_node = madera->dev->of_node;
switch (madera->type) {
case CS47L35:
if (IS_ENABLED(CONFIG_PINCTRL_CS47L35))
priv->chip = &cs47l35_pin_chip;
break;
case CS47L85:
case WM1840:
if (IS_ENABLED(CONFIG_PINCTRL_CS47L85))
priv->chip = &cs47l85_pin_chip;
break;
case CS47L90:
case CS47L91:
if (IS_ENABLED(CONFIG_PINCTRL_CS47L90))
priv->chip = &cs47l90_pin_chip;
break;
default:
break;
}
if (!priv->chip)
return -ENODEV;
madera_pin_desc.npins = priv->chip->n_pins;
ret = devm_pinctrl_register_and_init(&pdev->dev,
&madera_pin_desc,
priv,
&priv->pctl);
if (ret) {
dev_err(priv->dev, "Failed pinctrl register (%d)\n", ret);
return ret;
}
/* if the configuration is provided through pdata, apply it */
pinctrl: madera: Fix possible NULL pointer with pdata config If we are being configured via pdata we don't necessarily have any gpio mappings being configured that way so pdata->gpio_config could be NULL. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-28 11:45:37 +03:00
if (pdata && pdata->gpio_configs) {
pinctrl: madera: Add driver for Cirrus Logic Madera codecs These codecs have a variable number of I/O lines each of which is individually selectable to a wide range of possible functions. The functionality is slightly different from the traditional muxed GPIO since most of the functions can be mapped to any pin (and even the same function to multiple pins). Most pins have a dedicated "alternate" function that is only available on that pin. The alternate functions are usually a group of signals, though it is not always necessary to enable the full group, depending on the alternate function and how it is to be used. The mapping between alternate functions and GPIO pins varies between codecs depending on the number of alternate functions and available pins. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-21 13:00:01 +03:00
ret = pinctrl_register_mappings(pdata->gpio_configs,
pdata->n_gpio_configs);
if (ret) {
dev_err(priv->dev,
"Failed to register pdata mappings (%d)\n",
ret);
return ret;
}
}
ret = pinctrl_enable(priv->pctl);
if (ret) {
dev_err(priv->dev, "Failed to enable pinctrl (%d)\n", ret);
return ret;
}
dev_dbg(priv->dev, "pinctrl probed ok\n");
return 0;
}
static struct platform_driver madera_pin_driver = {
.probe = madera_pin_probe,
.driver = {
.name = "madera-pinctrl",
},
};
module_platform_driver(madera_pin_driver);
MODULE_DESCRIPTION("Madera pinctrl driver");
MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>");
MODULE_LICENSE("GPL v2");
Reference in New Issue Copy Permalink