iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/configs/sunxi_defconfig

159 lines
3.6 KiB
Plaintext
Raw Normal View History

ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security System) drivers by default. EXTCON is needed by the updated sun4i USB PHY driver. While at it, enable FHANDLE, which is needed by systemd and newer versions of udev. Also enable CGROUPS for systemd. And get rid of POWER_RESET, as the sun6i power reset driver has been removed in favor of proper sun6i watchdog support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31 22:56:41 +08:00
CONFIG_CGROUPS=y
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
CONFIG_BLK_DEV_INITRD=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_PERF_EVENTS=y
ARM: sunxi: Enable simplefb in the defconfig Now that we have simplefb support, we can enable it in our defconfig. Also enable the framebuffer console, so that we are sure that we actually get something displayed in any case. And while we're at it, enable the module support. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-20 21:48:40 +02:00
CONFIG_MODULES=y
ARM: sunxi_defconfig: enable MODULE_UNLOAD Loadable module support is enabled so we should allow unloading modules too. This also allows lsmod to show values other than "-2" in the "Used by" column. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-21 16:13:22 +10:00
CONFIG_MODULE_UNLOAD=y
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
CONFIG_ARCH_SUNXI=y
CONFIG_SMP=y
ARM: sunxi_defconfig: increase the number of maximum number of CPUs to 8 The a80 optimus has 8 CPUs. I propose we increase the maximum number of CPUs to 8 to avoid the following warning identified during automated boot testing [1]. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../arch/arm/kernel/devtree.c:144 arm_dt_init_cpu_maps+0x110/0x1e0() DT /cpu 5 nodes greater than max cores 4, capping them CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-00528-gbdccc4edeb03 #1 Hardware name: Allwinner sun9i Family [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x74/0x90) [] (dump_stack) from [] (warn_slowpath_common+0x70/0xac) [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x110/0x1e0) [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x634/0x8d4) [] (setup_arch) from [] (start_kernel+0x88/0x3ac) [] (start_kernel) from [<20008074>] (0x20008074) ---[ end trace cb88537fdc8fa200 ]--- [1] http://storage.kernelci.org/mainline/v3.19-528-gbdccc4edeb03/arm-sunxi_defconfig/lab-tbaker/boot-sun9i-a80-optimus.html Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-02-10 19:52:28 -08:00
CONFIG_NR_CPUS=8
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
ARM: sunxi_defconfig: Enable CMA The DRM driver most notably, but also out of tree drivers (for now) like the VPU or GPU drivers, are quite big consumers of large, contiguous memory buffers. However, the sunxi_defconfig doesn't enable CMA in order to mitigate that, which makes them almost unusable. Enable it to make sure it somewhat works. Cc: <stable@vger.kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-01-19 14:32:08 +01:00
CONFIG_CMA=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
ARM: sunxi_defconfig: Enable TOUCHSCREEN_SUN4I, CPUFREQ_DT, CPU_THERMAL This patch enables TOUCHSCREEN_SUN4I, CPUFREQ_DT, and CPU_THERMAL to enable cpufreq support with passive cpu cooling (thermal throttling) by default. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-06 10:35:26 +08:00
CONFIG_CPU_FREQ=y
CONFIG_CPUFREQ_DT=y
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot support This enables a few more options on the sunxi defconfigs such that I can use nfsroot to boot them (there is no local storage support yet). It also enables PRINTK_TIME and tmpfs since it's a common distro requirement. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-02 18:40:50 -08:00
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
can: Allwinner A10/A20 CAN Controller support - Defconfig Defconfig sunxi for Allwinner A10/A20 CAN driver Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-09-16 13:21:21 +02:00
CONFIG_CAN=y
CONFIG_CAN_SUN4I=y
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: sunxi_defconfig: Enable CMA The DRM driver most notably, but also out of tree drivers (for now) like the VPU or GPU drivers, are quite big consumers of large, contiguous memory buffers. However, the sunxi_defconfig doesn't enable CMA in order to mitigate that, which makes them almost unusable. Enable it to make sure it somewhat works. Cc: <stable@vger.kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-01-19 14:32:08 +01:00
CONFIG_DMA_CMA=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_AHCI_SUNXI=y
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
CONFIG_NETDEVICES=y
CONFIG_SUN4I_EMAC=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
# CONFIG_NET_VENDOR_ARC is not set
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
# CONFIG_NET_VENDOR_MICROCHIP is not set
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
# CONFIG_NET_VENDOR_NATSEMI is not set
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
# CONFIG_NET_VENDOR_SAMSUNG is not set
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
ARM: sunxi: Enable GMAC in sunxi_defconfig Since the support of the GMAC has been merged, we're using it as the ethernet controller on the A20 devices. However, sunxi_defconfig wasn't selecting it hence breaking the NFS boot. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-04-28 11:44:36 -07:00
CONFIG_STMMAC_ETH=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
# CONFIG_NET_VENDOR_VIA is not set
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
# CONFIG_NET_VENDOR_WIZNET is not set
ARM: configs: sunxi: Enable MICREL_PHY Include support for Micrel KSZ9031 PHY driver in sunxi_defconfig, which fixes issues of link not coming up at boot time with certain link partners. Micrel KSZ9031 PHY chip is used on Olimex A20-OLinuXino-LIME2 boards. The errata fix itself has been implemented in commit "3aed3e2a143c96: net: phy: micrel: add Asym Pause workaround" Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-01 09:57:09 +02:00
CONFIG_MICREL_PHY=y
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
# CONFIG_WLAN is not set
ARM: sunxi_defconfig: Enable INPUT_EVDEV so axp20x-pek can be used sunxi_defconfig already enables INPUT_AXP20X_PEK, but the device is not exposed to userspace. Enable INPUT_EVDEV so it is. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-06 23:53:47 +08:00
CONFIG_INPUT_EVDEV=y
ARM: sunxi: Clean up sunxi_defconfig Clean up sunxi_defconfig by generating a fresh file via make sunxi_defconfig make savedefconfig While this moves around a few lines and removes unnecessary symbols, it doesn't introduce any functional changes. The resulting .config is identical before and after this patch. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-11-20 02:46:19 +01:00
CONFIG_KEYBOARD_SUN4I_LRADC=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
# CONFIG_INPUT_MOUSE is not set
ARM: sunxi_defconfig: Enable TOUCHSCREEN_SUN4I, CPUFREQ_DT, CPU_THERMAL This patch enables TOUCHSCREEN_SUN4I, CPUFREQ_DT, and CPU_THERMAL to enable cpufreq support with passive cpu cooling (thermal throttling) by default. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-06 10:35:26 +08:00
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_SUN4I=y
ARM: sunxi: Clean up sunxi_defconfig Clean up sunxi_defconfig by generating a fresh file via make sunxi_defconfig make savedefconfig While this moves around a few lines and removes unnecessary symbols, it doesn't introduce any functional changes. The resulting .config is identical before and after this patch. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-11-20 02:46:19 +01:00
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AXP20X_PEK=y
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=8
CONFIG_SERIAL_8250_DW=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MV64XXX=y
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security System) drivers by default. EXTCON is needed by the updated sun4i USB PHY driver. While at it, enable FHANDLE, which is needed by systemd and newer versions of udev. Also enable CGROUPS for systemd. And get rid of POWER_RESET, as the sun6i power reset driver has been removed in favor of proper sun6i watchdog support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31 22:56:41 +08:00
CONFIG_I2C_SUN6I_P2WI=y
ARM: sunxi: Enable A31 SPI and SID in the defconfig Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-05 14:05:07 +01:00
CONFIG_SPI=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_SPI_SUN4I=y
ARM: sunxi: Enable A31 SPI and SID in the defconfig Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-05 14:05:07 +01:00
CONFIG_SPI_SUN6I=y
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
CONFIG_GPIO_SYSFS=y
ARM: sunxi: Add A31 reset driver to sunxi_defconfig Now that the A31 reset code is a driver of its own, we need it in the defconfig. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-06 21:44:23 -05:00
CONFIG_POWER_SUPPLY=y
arm: sunxi: Add additional power supplies A bunch of new power supplies have been added recently to handle the batteries and the AC-IN plugs. Add them to our defconfig. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-07-21 18:20:05 +02:00
CONFIG_CHARGER_AXP20X=y
CONFIG_BATTERY_AXP20X=y
ARM: Fix broken USB support in sunxi_defconfig Commit 69fb4dcada77 ("power: Add an axp20x-usb-power driver") introduced a new driver for the USB power supply used on various Allwinner based SBCs. However, the driver was not added to sunxi_defconfig which breaks USB support for some boards (e.g. LeMaker BananaPi) as the kernel will now turn off the USB power supply during boot by default if the driver isn't present. (This was not the case in linux 4.3 or lower where the USB power was always left on.) Hence, add the driver to sunxi_defconfig in order to keep USB support working on those boards that require it. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Reported-by: David Tulloh <david@tulloh.id.au> Tested-by: David Tulloh <david@tulloh.id.au> Tested-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-29 02:47:33 +01:00
CONFIG_AXP20X_POWER=y
ARM: sunxi_defconfig: Enable TOUCHSCREEN_SUN4I, CPUFREQ_DT, CPU_THERMAL This patch enables TOUCHSCREEN_SUN4I, CPUFREQ_DT, and CPU_THERMAL to enable cpufreq support with passive cpu cooling (thermal throttling) by default. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-06 10:35:26 +08:00
CONFIG_THERMAL=y
CONFIG_CPU_THERMAL=y
ARM: sunxi: Enable CONFIG_SUN8I_THERMAL Many sunxi based board needs CONFIG_SUN8I_THERMAL for thermal support. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-12-29 11:17:07 +00:00
CONFIG_SUN8I_THERMAL=y
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
CONFIG_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
ARM: sunxi_defconfig: Enable AC100 RTC driver Enable the AC100 RTC driver so boards with it can keep track of time. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-08 23:07:15 +01:00
CONFIG_MFD_AC100=y
ARM: sunxi_defconfig: Update MFD_AXP20X symbol and enable MFD_AXP20X_RSB axp20x support has been split into 2 parts, I2C and RSB interface variants. Update the MFD_AXP20X symbol for I2C support, and also enable MFD_AXP20X_RSB to support RSB variants. Keep MFD_AXP20X enabled for now, to ease migration for automated boot farms while the patches are being merged. This should be removed in the next release. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-11-17 00:38:27 +08:00
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_AXP20X_RSB=y
ARM: sunxi_defconfig: enable CONFIG_REGULATOR Commit 97a13e5289ba ('net: phy: mdio-sun4i: don't select REGULATOR') removed the select of REGULATOR, which means that it now has to be explicitly enabled in the defconfig or things won't work very well. In particular, this fixes a problem with SD/MMC not probing on my A31-based board. Cc: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-14 23:26:56 -07:00
CONFIG_REGULATOR=y
ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE I missed in 9a2ad529ed26 that REGULATOR_FIXED_VOLTAGE had also gotten deselected, so it needs to be added back as an explicit option. Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-19 14:29:14 -07:00
CONFIG_REGULATOR_FIXED_VOLTAGE=y
ARM: sunxi: Add AXP20x support in defconfig Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-12-23 10:53:13 +08:00
CONFIG_REGULATOR_AXP20X=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_REGULATOR_GPIO=y
ARM: sunxi_defconfig: Enable sunxi IR driver A consumer IR receiver is commonly found on Allwinner SoC based development boards and set top boxes. The driver has been available for some time. Enable it by default. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-06 23:53:44 +08:00
CONFIG_MEDIA_SUPPORT=y
media: rc-core: do not depend on MEDIA_SUPPORT There is no dependency between the two, so remove the dependency in Kconfig files. Signed-off-by: Sean Young <sean@mess.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-02 15:37:58 -04:00
CONFIG_RC_CORE=y
ARM: sunxi_defconfig: Enable sunxi IR driver A consumer IR receiver is commonly found on Allwinner SoC based development boards and set top boxes. The driver has been available for some time. Enable it by default. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-06 23:53:44 +08:00
CONFIG_RC_DEVICES=y
CONFIG_IR_SUNXI=y
ARM: sunxi: Enable sun4i DRM driver Enable the new DRM driver in the sunxi default configuration Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-05-11 22:34:57 +02:00
CONFIG_DRM=y
CONFIG_DRM_SUN4I=y
drm/bridge: dumb-vga-dac: Rename driver to simple-bridge The dumb-vga-dac driver can support simple DRM bridges without being limited to VGA DACs. Rename it to simple-bridge. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-12-laurent.pinchart@ideasonboard.com
2020-02-26 13:24:31 +02:00
CONFIG_DRM_SIMPLE_BRIDGE=y
ARM: sunxi: Enable simplefb in the defconfig Now that we have simplefb support, we can enable it in our defconfig. Also enable the framebuffer console, so that we are sure that we actually get something displayed in any case. And while we're at it, enable the module support. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-04-20 21:48:40 +02:00
CONFIG_FB_SIMPLE=y
ARM: sunxi_defconfig: Enable A10 audio codec driver The A10 audio codec driver supports the on-chip audio codec found on Allwinner A10, A10s, A13, A20 SoCs. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-06 23:53:45 +08:00
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SUN4I_CODEC=y
ARM: configs: sunxi: Add sun8i analog codec On my orange pi PC, I got lot of "sun4i-codec 1c22c00.codec: Failed to register our card". This was due to a missing component: the sun8i analog codec. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-04-02 09:34:21 +00:00
CONFIG_SND_SUN8I_CODEC_ANALOG=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
ARM: sunxi_defconfig: Enable MUSB HDRC driver with Allwinner glue Allwinner SoCs typically have a Mentor Graphics Inventra MUSB dual role controller for USB OTG. Now that the issue with MUSB and USB gadget registration order has been resolved, we can enable this driver in dual role mode. This requires the NOP USB transceiver driver, which is also enabled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-09 23:31:27 +08:00
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_GADGET=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_MMC=y
CONFIG_MMC_SUNXI=y
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_RTC_CLASS=y
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
ARM: sunxi_defconfig: Enable AC100 RTC driver Enable the AC100 RTC driver so boards with it can keep track of time. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-08 23:07:15 +01:00
CONFIG_RTC_DRV_AC100=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_RTC_DRV_SUNXI=y
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security System) drivers by default. EXTCON is needed by the updated sun4i USB PHY driver. While at it, enable FHANDLE, which is needed by systemd and newer versions of udev. Also enable CGROUPS for systemd. And get rid of POWER_RESET, as the sun6i power reset driver has been removed in favor of proper sun6i watchdog support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31 22:56:41 +08:00
CONFIG_DMADEVICES=y
CONFIG_DMA_SUN6I=y
ARM: sunxi: Add a defconfig for the Allwinner SoCs So far, the Allwinner SoCs were only supported using the multi_v7_defconfig. Add a defconfig of our own to have one a bit more tailor-made. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-09-25 21:50:09 +03:00
# CONFIG_IOMMU_SUPPORT is not set
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security System) drivers by default. EXTCON is needed by the updated sun4i USB PHY driver. While at it, enable FHANDLE, which is needed by systemd and newer versions of udev. Also enable CGROUPS for systemd. And get rid of POWER_RESET, as the sun6i power reset driver has been removed in favor of proper sun6i watchdog support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31 22:56:41 +08:00
CONFIG_EXTCON=y
arm: sunxi: Add AXP20X_ADC AXP20X_POWER depends on IIO. Even though it does not depend on AXP20X_ADC, it is the new, preferred way of getting power supply configuration, it's going to be enabled anyway. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-07-21 18:20:04 +02:00
CONFIG_IIO=y
CONFIG_AXP20X_ADC=y
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security System) drivers by default. EXTCON is needed by the updated sun4i USB PHY driver. While at it, enable FHANDLE, which is needed by systemd and newer versions of udev. Also enable CGROUPS for systemd. And get rid of POWER_RESET, as the sun6i power reset driver has been removed in favor of proper sun6i watchdog support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31 22:56:41 +08:00
CONFIG_PWM=y
CONFIG_PWM_SUN4I=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_PHY_SUN4I_USB=y
ARM: sunxi_defconfig: Enable CONFIG_PHY_SUN9I_USB On sun9i we have a new PHY driver for USB. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-02-03 06:22:04 +08:00
CONFIG_PHY_SUN9I_USB=y
ARM: sunxi: Re-enable SID driver in sunxi_defconfig Commit 3d0b16a66c8a ("nvmem: sunxi: Move the SID driver to the nvmem framework") moved the the sunxi SID driver to a new framework, but left sunxi_defconfig with the deprecated config symbol EEPROM_SUNXI_SID instead of the new symbol NVMEM_SUNXI_SID. Hence, re-enable the driver in sunxi_defconfig. Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-11-20 02:46:17 +01:00
CONFIG_NVMEM=y
CONFIG_NVMEM_SUNXI_SID=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot support This enables a few more options on the sunxi defconfigs such that I can use nfsroot to boot them (there is no local storage support yet). It also enables PRINTK_TIME and tmpfs since it's a common distro requirement. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-02 18:40:50 -08:00
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot support This enables a few more options on the sunxi defconfigs such that I can use nfsroot to boot them (there is no local storage support yet). It also enables PRINTK_TIME and tmpfs since it's a common distro requirement. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-02 18:40:50 -08:00
CONFIG_ROOT_NFS=y
ARM: sunxi_defconfig: add NLS_CODEPAGE_437 and NLS_ISO8859_1 Otherwise CONFIG_VFAT_FS is useless as mounting vfat fails. Signed-off-by: Luc Verhaegen <libv@skynet.be> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-08-02 15:06:30 +02:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot support This enables a few more options on the sunxi defconfigs such that I can use nfsroot to boot them (there is no local storage support yet). It also enables PRINTK_TIME and tmpfs since it's a common distro requirement. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-02 18:40:50 -08:00
CONFIG_PRINTK_TIME=y
ARM: configs: update Allwinner options Update sunxi_defconfig and multi_v7 with all the latest Allwinner additions. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-29 19:21:13 +02:00
CONFIG_DEBUG_FS=y
ARM: configs: sunxi: add new Allwinner crypto options This patch adds the new Allwinner crypto configs to sunxi_defconfig Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-10-23 22:05:11 +02:00
CONFIG_CRYPTO_DEV_ALLWINNER=y
CONFIG_CRYPTO_DEV_SUN8I_CE=y
ARM: sunxi_defconfig: Enable DMA_SUN6I, P2WI, PWM, cryptodev, EXTCON, FHANDLE Enable sun6i DMA engine, sun6i P2WI, PWM, and crypto engine (Security System) drivers by default. EXTCON is needed by the updated sun4i USB PHY driver. While at it, enable FHANDLE, which is needed by systemd and newer versions of udev. Also enable CGROUPS for systemd. And get rid of POWER_RESET, as the sun6i power reset driver has been removed in favor of proper sun6i watchdog support. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31 22:56:41 +08:00
CONFIG_CRYPTO_DEV_SUN4I_SS=y
Reference in New Issue Copy Permalink