linux/drivers/mailbox/omap-mailbox.c

940 lines
22 KiB
C
Raw Normal View History

/*
* OMAP mailbox driver
*
* Copyright (C) 2006-2009 Nokia Corporation. All rights reserved.
* Copyright (C) 2013-2014 Texas Instruments Inc.
*
* Contact: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
* Suman Anna <s-anna@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
#include <linux/kfifo.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/platform_data/mailbox-omap.h>
#include <linux/omap-mailbox.h>
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
#include <linux/mailbox_controller.h>
#include <linux/mailbox_client.h>
mailbox/omap: Add ti,mbox-send-noirq quirk to fix AM33xx CPU Idle The mailbox framework controls the transmission queue and requires either its controller implementations or clients to run the state machine for the Tx queue. The OMAP mailbox controller uses a Tx-ready interrupt as the equivalent of a Tx-done interrupt to run this Tx queue state-machine. The WkupM3 processor on AM33xx and AM43xx SoCs is used to offload certain PM tasks, like doing the necessary operations for Device PM suspend/resume or for entering lower c-states during cpuidle. The CPUIdle on AM33xx requires the messages to be sent without having to trigger the Tx-ready interrupts, as the interrupt would immediately terminate the CPUIdle operation. Support for this has been added by introducing a DT quirk, "ti,mbox-send-noirq" and using it to modify the normal OMAP mailbox controller behavior on the sub-mailboxes used to communicate with the WkupM3 remote processor. This also requires the wkup_m3_ipc driver to adjust its mailbox usage logic to run the Tx state machine. NOTE: - AM43xx does not communicate with WkupM3 for CPU Idle, so is not affected by this behavior. But, it uses the same IPC driver for PM suspend/resume functionality, so requires the quirk as well, because of changes to the common wkup_m3_ipc driver. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [s-anna@ti.com: revise logic and update comments/patch description] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2015-09-23 03:14:52 +03:00
#include "mailbox.h"
#define MAILBOX_REVISION 0x000
#define MAILBOX_MESSAGE(m) (0x040 + 4 * (m))
#define MAILBOX_FIFOSTATUS(m) (0x080 + 4 * (m))
#define MAILBOX_MSGSTATUS(m) (0x0c0 + 4 * (m))
#define OMAP2_MAILBOX_IRQSTATUS(u) (0x100 + 8 * (u))
#define OMAP2_MAILBOX_IRQENABLE(u) (0x104 + 8 * (u))
#define OMAP4_MAILBOX_IRQSTATUS(u) (0x104 + 0x10 * (u))
#define OMAP4_MAILBOX_IRQENABLE(u) (0x108 + 0x10 * (u))
#define OMAP4_MAILBOX_IRQENABLE_CLR(u) (0x10c + 0x10 * (u))
#define MAILBOX_IRQSTATUS(type, u) (type ? OMAP4_MAILBOX_IRQSTATUS(u) : \
OMAP2_MAILBOX_IRQSTATUS(u))
#define MAILBOX_IRQENABLE(type, u) (type ? OMAP4_MAILBOX_IRQENABLE(u) : \
OMAP2_MAILBOX_IRQENABLE(u))
#define MAILBOX_IRQDISABLE(type, u) (type ? OMAP4_MAILBOX_IRQENABLE_CLR(u) \
: OMAP2_MAILBOX_IRQENABLE(u))
#define MAILBOX_IRQ_NEWMSG(m) (1 << (2 * (m)))
#define MAILBOX_IRQ_NOTFULL(m) (1 << (2 * (m) + 1))
#define MBOX_REG_SIZE 0x120
#define OMAP4_MBOX_REG_SIZE 0x130
#define MBOX_NR_REGS (MBOX_REG_SIZE / sizeof(u32))
#define OMAP4_MBOX_NR_REGS (OMAP4_MBOX_REG_SIZE / sizeof(u32))
struct omap_mbox_fifo {
unsigned long msg;
unsigned long fifo_stat;
unsigned long msg_stat;
unsigned long irqenable;
unsigned long irqstatus;
unsigned long irqdisable;
u32 intr_bit;
};
struct omap_mbox_queue {
spinlock_t lock;
struct kfifo fifo;
struct work_struct work;
struct omap_mbox *mbox;
bool full;
};
struct omap_mbox_device {
struct device *dev;
struct mutex cfg_lock;
void __iomem *mbox_base;
u32 num_users;
u32 num_fifos;
struct omap_mbox **mboxes;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
struct mbox_controller controller;
struct list_head elem;
};
struct omap_mbox_fifo_info {
int tx_id;
int tx_usr;
int tx_irq;
int rx_id;
int rx_usr;
int rx_irq;
const char *name;
mailbox/omap: Add ti,mbox-send-noirq quirk to fix AM33xx CPU Idle The mailbox framework controls the transmission queue and requires either its controller implementations or clients to run the state machine for the Tx queue. The OMAP mailbox controller uses a Tx-ready interrupt as the equivalent of a Tx-done interrupt to run this Tx queue state-machine. The WkupM3 processor on AM33xx and AM43xx SoCs is used to offload certain PM tasks, like doing the necessary operations for Device PM suspend/resume or for entering lower c-states during cpuidle. The CPUIdle on AM33xx requires the messages to be sent without having to trigger the Tx-ready interrupts, as the interrupt would immediately terminate the CPUIdle operation. Support for this has been added by introducing a DT quirk, "ti,mbox-send-noirq" and using it to modify the normal OMAP mailbox controller behavior on the sub-mailboxes used to communicate with the WkupM3 remote processor. This also requires the wkup_m3_ipc driver to adjust its mailbox usage logic to run the Tx state machine. NOTE: - AM43xx does not communicate with WkupM3 for CPU Idle, so is not affected by this behavior. But, it uses the same IPC driver for PM suspend/resume functionality, so requires the quirk as well, because of changes to the common wkup_m3_ipc driver. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [s-anna@ti.com: revise logic and update comments/patch description] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2015-09-23 03:14:52 +03:00
bool send_no_irq;
};
struct omap_mbox {
const char *name;
int irq;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
struct omap_mbox_queue *rxq;
struct device *dev;
struct omap_mbox_device *parent;
struct omap_mbox_fifo tx_fifo;
struct omap_mbox_fifo rx_fifo;
u32 ctx[OMAP4_MBOX_NR_REGS];
u32 intr_type;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
struct mbox_chan *chan;
mailbox/omap: Add ti,mbox-send-noirq quirk to fix AM33xx CPU Idle The mailbox framework controls the transmission queue and requires either its controller implementations or clients to run the state machine for the Tx queue. The OMAP mailbox controller uses a Tx-ready interrupt as the equivalent of a Tx-done interrupt to run this Tx queue state-machine. The WkupM3 processor on AM33xx and AM43xx SoCs is used to offload certain PM tasks, like doing the necessary operations for Device PM suspend/resume or for entering lower c-states during cpuidle. The CPUIdle on AM33xx requires the messages to be sent without having to trigger the Tx-ready interrupts, as the interrupt would immediately terminate the CPUIdle operation. Support for this has been added by introducing a DT quirk, "ti,mbox-send-noirq" and using it to modify the normal OMAP mailbox controller behavior on the sub-mailboxes used to communicate with the WkupM3 remote processor. This also requires the wkup_m3_ipc driver to adjust its mailbox usage logic to run the Tx state machine. NOTE: - AM43xx does not communicate with WkupM3 for CPU Idle, so is not affected by this behavior. But, it uses the same IPC driver for PM suspend/resume functionality, so requires the quirk as well, because of changes to the common wkup_m3_ipc driver. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [s-anna@ti.com: revise logic and update comments/patch description] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2015-09-23 03:14:52 +03:00
bool send_no_irq;
};
/* global variables for the mailbox devices */
static DEFINE_MUTEX(omap_mbox_devices_lock);
static LIST_HEAD(omap_mbox_devices);
static unsigned int mbox_kfifo_size = CONFIG_OMAP_MBOX_KFIFO_SIZE;
module_param(mbox_kfifo_size, uint, S_IRUGO);
MODULE_PARM_DESC(mbox_kfifo_size, "Size of omap's mailbox kfifo (bytes)");
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
static struct omap_mbox *mbox_chan_to_omap_mbox(struct mbox_chan *chan)
{
if (!chan || !chan->con_priv)
return NULL;
return (struct omap_mbox *)chan->con_priv;
}
static inline
unsigned int mbox_read_reg(struct omap_mbox_device *mdev, size_t ofs)
{
return __raw_readl(mdev->mbox_base + ofs);
}
static inline
void mbox_write_reg(struct omap_mbox_device *mdev, u32 val, size_t ofs)
{
__raw_writel(val, mdev->mbox_base + ofs);
}
/* Mailbox FIFO handle functions */
static mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
{
struct omap_mbox_fifo *fifo = &mbox->rx_fifo;
return (mbox_msg_t) mbox_read_reg(mbox->parent, fifo->msg);
}
static void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
{
struct omap_mbox_fifo *fifo = &mbox->tx_fifo;
mbox_write_reg(mbox->parent, msg, fifo->msg);
}
static int mbox_fifo_empty(struct omap_mbox *mbox)
{
struct omap_mbox_fifo *fifo = &mbox->rx_fifo;
return (mbox_read_reg(mbox->parent, fifo->msg_stat) == 0);
}
static int mbox_fifo_full(struct omap_mbox *mbox)
{
struct omap_mbox_fifo *fifo = &mbox->tx_fifo;
return mbox_read_reg(mbox->parent, fifo->fifo_stat);
}
/* Mailbox IRQ handle functions */
static void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
{
struct omap_mbox_fifo *fifo = (irq == IRQ_TX) ?
&mbox->tx_fifo : &mbox->rx_fifo;
u32 bit = fifo->intr_bit;
u32 irqstatus = fifo->irqstatus;
mbox_write_reg(mbox->parent, bit, irqstatus);
/* Flush posted write for irq status to avoid spurious interrupts */
mbox_read_reg(mbox->parent, irqstatus);
}
static int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
{
struct omap_mbox_fifo *fifo = (irq == IRQ_TX) ?
&mbox->tx_fifo : &mbox->rx_fifo;
u32 bit = fifo->intr_bit;
u32 irqenable = fifo->irqenable;
u32 irqstatus = fifo->irqstatus;
u32 enable = mbox_read_reg(mbox->parent, irqenable);
u32 status = mbox_read_reg(mbox->parent, irqstatus);
return (int)(enable & status & bit);
}
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
void omap_mbox_save_ctx(struct mbox_chan *chan)
{
int i;
int nr_regs;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
struct omap_mbox *mbox = mbox_chan_to_omap_mbox(chan);
if (WARN_ON(!mbox))
return;
if (mbox->intr_type)
nr_regs = OMAP4_MBOX_NR_REGS;
else
nr_regs = MBOX_NR_REGS;
for (i = 0; i < nr_regs; i++) {
mbox->ctx[i] = mbox_read_reg(mbox->parent, i * sizeof(u32));
dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
i, mbox->ctx[i]);
}
}
EXPORT_SYMBOL(omap_mbox_save_ctx);
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
void omap_mbox_restore_ctx(struct mbox_chan *chan)
{
int i;
int nr_regs;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
struct omap_mbox *mbox = mbox_chan_to_omap_mbox(chan);
if (WARN_ON(!mbox))
return;
if (mbox->intr_type)
nr_regs = OMAP4_MBOX_NR_REGS;
else
nr_regs = MBOX_NR_REGS;
for (i = 0; i < nr_regs; i++) {
mbox_write_reg(mbox->parent, mbox->ctx[i], i * sizeof(u32));
dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
i, mbox->ctx[i]);
}
}
EXPORT_SYMBOL(omap_mbox_restore_ctx);
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
static void _omap_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
{
u32 l;
struct omap_mbox_fifo *fifo = (irq == IRQ_TX) ?
&mbox->tx_fifo : &mbox->rx_fifo;
u32 bit = fifo->intr_bit;
u32 irqenable = fifo->irqenable;
l = mbox_read_reg(mbox->parent, irqenable);
l |= bit;
mbox_write_reg(mbox->parent, l, irqenable);
}
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
static void _omap_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
{
struct omap_mbox_fifo *fifo = (irq == IRQ_TX) ?
&mbox->tx_fifo : &mbox->rx_fifo;
u32 bit = fifo->intr_bit;
u32 irqdisable = fifo->irqdisable;
/*
* Read and update the interrupt configuration register for pre-OMAP4.
* OMAP4 and later SoCs have a dedicated interrupt disabling register.
*/
if (!mbox->intr_type)
bit = mbox_read_reg(mbox->parent, irqdisable) & ~bit;
mbox_write_reg(mbox->parent, bit, irqdisable);
}
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
void omap_mbox_enable_irq(struct mbox_chan *chan, omap_mbox_irq_t irq)
{
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
struct omap_mbox *mbox = mbox_chan_to_omap_mbox(chan);
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
if (WARN_ON(!mbox))
return;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
_omap_mbox_enable_irq(mbox, irq);
}
EXPORT_SYMBOL(omap_mbox_enable_irq);
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
void omap_mbox_disable_irq(struct mbox_chan *chan, omap_mbox_irq_t irq)
{
struct omap_mbox *mbox = mbox_chan_to_omap_mbox(chan);
if (WARN_ON(!mbox))
return;
_omap_mbox_disable_irq(mbox, irq);
}
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
EXPORT_SYMBOL(omap_mbox_disable_irq);
/*
* Message receiver(workqueue)
*/
static void mbox_rx_work(struct work_struct *work)
{
struct omap_mbox_queue *mq =
container_of(work, struct omap_mbox_queue, work);
mbox_msg_t msg;
int len;
while (kfifo_len(&mq->fifo) >= sizeof(msg)) {
len = kfifo_out(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
WARN_ON(len != sizeof(msg));
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
mbox_chan_received_data(mq->mbox->chan, (void *)msg);
spin_lock_irq(&mq->lock);
if (mq->full) {
mq->full = false;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
_omap_mbox_enable_irq(mq->mbox, IRQ_RX);
}
spin_unlock_irq(&mq->lock);
}
}
/*
* Mailbox interrupt handler
*/
static void __mbox_tx_interrupt(struct omap_mbox *mbox)
{
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
_omap_mbox_disable_irq(mbox, IRQ_TX);
ack_mbox_irq(mbox, IRQ_TX);
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
mbox_chan_txdone(mbox->chan, 0);
}
static void __mbox_rx_interrupt(struct omap_mbox *mbox)
{
struct omap_mbox_queue *mq = mbox->rxq;
mbox_msg_t msg;
int len;
while (!mbox_fifo_empty(mbox)) {
if (unlikely(kfifo_avail(&mq->fifo) < sizeof(msg))) {
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
_omap_mbox_disable_irq(mbox, IRQ_RX);
mq->full = true;
goto nomem;
}
msg = mbox_fifo_read(mbox);
len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
WARN_ON(len != sizeof(msg));
}
/* no more messages in the fifo. clear IRQ source. */
ack_mbox_irq(mbox, IRQ_RX);
nomem:
schedule_work(&mbox->rxq->work);
}
static irqreturn_t mbox_interrupt(int irq, void *p)
{
struct omap_mbox *mbox = p;
if (is_mbox_irq(mbox, IRQ_TX))
__mbox_tx_interrupt(mbox);
if (is_mbox_irq(mbox, IRQ_RX))
__mbox_rx_interrupt(mbox);
return IRQ_HANDLED;
}
static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
void (*work)(struct work_struct *))
{
struct omap_mbox_queue *mq;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
if (!work)
return NULL;
mq = kzalloc(sizeof(struct omap_mbox_queue), GFP_KERNEL);
if (!mq)
return NULL;
spin_lock_init(&mq->lock);
if (kfifo_alloc(&mq->fifo, mbox_kfifo_size, GFP_KERNEL))
goto error;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
INIT_WORK(&mq->work, work);
return mq;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
error:
kfree(mq);
return NULL;
}
static void mbox_queue_free(struct omap_mbox_queue *q)
{
kfifo_free(&q->fifo);
kfree(q);
}
static int omap_mbox_startup(struct omap_mbox *mbox)
{
int ret = 0;
struct omap_mbox_queue *mq;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
mq = mbox_queue_alloc(mbox, mbox_rx_work);
if (!mq)
return -ENOMEM;
mbox->rxq = mq;
mq->mbox = mbox;
ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED,
mbox->name, mbox);
if (unlikely(ret)) {
pr_err("failed to register mailbox interrupt:%d\n", ret);
goto fail_request_irq;
}
mailbox/omap: Add ti,mbox-send-noirq quirk to fix AM33xx CPU Idle The mailbox framework controls the transmission queue and requires either its controller implementations or clients to run the state machine for the Tx queue. The OMAP mailbox controller uses a Tx-ready interrupt as the equivalent of a Tx-done interrupt to run this Tx queue state-machine. The WkupM3 processor on AM33xx and AM43xx SoCs is used to offload certain PM tasks, like doing the necessary operations for Device PM suspend/resume or for entering lower c-states during cpuidle. The CPUIdle on AM33xx requires the messages to be sent without having to trigger the Tx-ready interrupts, as the interrupt would immediately terminate the CPUIdle operation. Support for this has been added by introducing a DT quirk, "ti,mbox-send-noirq" and using it to modify the normal OMAP mailbox controller behavior on the sub-mailboxes used to communicate with the WkupM3 remote processor. This also requires the wkup_m3_ipc driver to adjust its mailbox usage logic to run the Tx state machine. NOTE: - AM43xx does not communicate with WkupM3 for CPU Idle, so is not affected by this behavior. But, it uses the same IPC driver for PM suspend/resume functionality, so requires the quirk as well, because of changes to the common wkup_m3_ipc driver. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [s-anna@ti.com: revise logic and update comments/patch description] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2015-09-23 03:14:52 +03:00
if (mbox->send_no_irq)
mbox->chan->txdone_method = TXDONE_BY_ACK;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
_omap_mbox_enable_irq(mbox, IRQ_RX);
return 0;
fail_request_irq:
mbox_queue_free(mbox->rxq);
return ret;
}
static void omap_mbox_fini(struct omap_mbox *mbox)
{
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
_omap_mbox_disable_irq(mbox, IRQ_RX);
free_irq(mbox->irq, mbox);
flush_work(&mbox->rxq->work);
mbox_queue_free(mbox->rxq);
}
static struct omap_mbox *omap_mbox_device_find(struct omap_mbox_device *mdev,
const char *mbox_name)
{
struct omap_mbox *_mbox, *mbox = NULL;
struct omap_mbox **mboxes = mdev->mboxes;
int i;
if (!mboxes)
return NULL;
for (i = 0; (_mbox = mboxes[i]); i++) {
if (!strcmp(_mbox->name, mbox_name)) {
mbox = _mbox;
break;
}
}
return mbox;
}
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
struct mbox_chan *omap_mbox_request_channel(struct mbox_client *cl,
const char *chan_name)
{
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
struct device *dev = cl->dev;
struct omap_mbox *mbox = NULL;
struct omap_mbox_device *mdev;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
struct mbox_chan *chan;
unsigned long flags;
int ret;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
if (!dev)
return ERR_PTR(-ENODEV);
if (dev->of_node) {
pr_err("%s: please use mbox_request_channel(), this API is supported only for OMAP non-DT usage\n",
__func__);
return ERR_PTR(-ENODEV);
}
mutex_lock(&omap_mbox_devices_lock);
list_for_each_entry(mdev, &omap_mbox_devices, elem) {
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
mbox = omap_mbox_device_find(mdev, chan_name);
if (mbox)
break;
}
mutex_unlock(&omap_mbox_devices_lock);
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
if (!mbox || !mbox->chan)
return ERR_PTR(-ENOENT);
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
chan = mbox->chan;
spin_lock_irqsave(&chan->lock, flags);
chan->msg_free = 0;
chan->msg_count = 0;
chan->active_req = NULL;
chan->cl = cl;
init_completion(&chan->tx_complete);
spin_unlock_irqrestore(&chan->lock, flags);
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
ret = chan->mbox->ops->startup(chan);
if (ret) {
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
pr_err("Unable to startup the chan (%d)\n", ret);
mbox_free_channel(chan);
chan = ERR_PTR(ret);
}
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
return chan;
}
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
EXPORT_SYMBOL(omap_mbox_request_channel);
static struct class omap_mbox_class = { .name = "mbox", };
static int omap_mbox_register(struct omap_mbox_device *mdev)
{
int ret;
int i;
struct omap_mbox **mboxes;
if (!mdev || !mdev->mboxes)
return -EINVAL;
mboxes = mdev->mboxes;
for (i = 0; mboxes[i]; i++) {
struct omap_mbox *mbox = mboxes[i];
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
mbox->dev = device_create(&omap_mbox_class, mdev->dev,
0, mbox, "%s", mbox->name);
if (IS_ERR(mbox->dev)) {
ret = PTR_ERR(mbox->dev);
goto err_out;
}
}
mutex_lock(&omap_mbox_devices_lock);
list_add(&mdev->elem, &omap_mbox_devices);
mutex_unlock(&omap_mbox_devices_lock);
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
ret = mbox_controller_register(&mdev->controller);
err_out:
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
if (ret) {
while (i--)
device_unregister(mboxes[i]->dev);
}
return ret;
}
static int omap_mbox_unregister(struct omap_mbox_device *mdev)
{
int i;
struct omap_mbox **mboxes;
if (!mdev || !mdev->mboxes)
return -EINVAL;
mutex_lock(&omap_mbox_devices_lock);
list_del(&mdev->elem);
mutex_unlock(&omap_mbox_devices_lock);
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
mbox_controller_unregister(&mdev->controller);
mboxes = mdev->mboxes;
for (i = 0; mboxes[i]; i++)
device_unregister(mboxes[i]->dev);
return 0;
}
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
static int omap_mbox_chan_startup(struct mbox_chan *chan)
{
struct omap_mbox *mbox = mbox_chan_to_omap_mbox(chan);
struct omap_mbox_device *mdev = mbox->parent;
int ret = 0;
mutex_lock(&mdev->cfg_lock);
pm_runtime_get_sync(mdev->dev);
ret = omap_mbox_startup(mbox);
if (ret)
pm_runtime_put_sync(mdev->dev);
mutex_unlock(&mdev->cfg_lock);
return ret;
}
static void omap_mbox_chan_shutdown(struct mbox_chan *chan)
{
struct omap_mbox *mbox = mbox_chan_to_omap_mbox(chan);
struct omap_mbox_device *mdev = mbox->parent;
mutex_lock(&mdev->cfg_lock);
omap_mbox_fini(mbox);
pm_runtime_put_sync(mdev->dev);
mutex_unlock(&mdev->cfg_lock);
}
mailbox/omap: Add ti,mbox-send-noirq quirk to fix AM33xx CPU Idle The mailbox framework controls the transmission queue and requires either its controller implementations or clients to run the state machine for the Tx queue. The OMAP mailbox controller uses a Tx-ready interrupt as the equivalent of a Tx-done interrupt to run this Tx queue state-machine. The WkupM3 processor on AM33xx and AM43xx SoCs is used to offload certain PM tasks, like doing the necessary operations for Device PM suspend/resume or for entering lower c-states during cpuidle. The CPUIdle on AM33xx requires the messages to be sent without having to trigger the Tx-ready interrupts, as the interrupt would immediately terminate the CPUIdle operation. Support for this has been added by introducing a DT quirk, "ti,mbox-send-noirq" and using it to modify the normal OMAP mailbox controller behavior on the sub-mailboxes used to communicate with the WkupM3 remote processor. This also requires the wkup_m3_ipc driver to adjust its mailbox usage logic to run the Tx state machine. NOTE: - AM43xx does not communicate with WkupM3 for CPU Idle, so is not affected by this behavior. But, it uses the same IPC driver for PM suspend/resume functionality, so requires the quirk as well, because of changes to the common wkup_m3_ipc driver. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [s-anna@ti.com: revise logic and update comments/patch description] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2015-09-23 03:14:52 +03:00
static int omap_mbox_chan_send_noirq(struct omap_mbox *mbox, void *data)
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
{
int ret = -EBUSY;
mailbox/omap: Add ti,mbox-send-noirq quirk to fix AM33xx CPU Idle The mailbox framework controls the transmission queue and requires either its controller implementations or clients to run the state machine for the Tx queue. The OMAP mailbox controller uses a Tx-ready interrupt as the equivalent of a Tx-done interrupt to run this Tx queue state-machine. The WkupM3 processor on AM33xx and AM43xx SoCs is used to offload certain PM tasks, like doing the necessary operations for Device PM suspend/resume or for entering lower c-states during cpuidle. The CPUIdle on AM33xx requires the messages to be sent without having to trigger the Tx-ready interrupts, as the interrupt would immediately terminate the CPUIdle operation. Support for this has been added by introducing a DT quirk, "ti,mbox-send-noirq" and using it to modify the normal OMAP mailbox controller behavior on the sub-mailboxes used to communicate with the WkupM3 remote processor. This also requires the wkup_m3_ipc driver to adjust its mailbox usage logic to run the Tx state machine. NOTE: - AM43xx does not communicate with WkupM3 for CPU Idle, so is not affected by this behavior. But, it uses the same IPC driver for PM suspend/resume functionality, so requires the quirk as well, because of changes to the common wkup_m3_ipc driver. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [s-anna@ti.com: revise logic and update comments/patch description] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2015-09-23 03:14:52 +03:00
if (!mbox_fifo_full(mbox)) {
_omap_mbox_enable_irq(mbox, IRQ_RX);
mbox_fifo_write(mbox, (mbox_msg_t)data);
ret = 0;
_omap_mbox_disable_irq(mbox, IRQ_RX);
/* we must read and ack the interrupt directly from here */
mbox_fifo_read(mbox);
ack_mbox_irq(mbox, IRQ_RX);
}
return ret;
}
static int omap_mbox_chan_send(struct omap_mbox *mbox, void *data)
{
int ret = -EBUSY;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
if (!mbox_fifo_full(mbox)) {
mbox_fifo_write(mbox, (mbox_msg_t)data);
ret = 0;
}
/* always enable the interrupt */
_omap_mbox_enable_irq(mbox, IRQ_TX);
return ret;
}
mailbox/omap: Add ti,mbox-send-noirq quirk to fix AM33xx CPU Idle The mailbox framework controls the transmission queue and requires either its controller implementations or clients to run the state machine for the Tx queue. The OMAP mailbox controller uses a Tx-ready interrupt as the equivalent of a Tx-done interrupt to run this Tx queue state-machine. The WkupM3 processor on AM33xx and AM43xx SoCs is used to offload certain PM tasks, like doing the necessary operations for Device PM suspend/resume or for entering lower c-states during cpuidle. The CPUIdle on AM33xx requires the messages to be sent without having to trigger the Tx-ready interrupts, as the interrupt would immediately terminate the CPUIdle operation. Support for this has been added by introducing a DT quirk, "ti,mbox-send-noirq" and using it to modify the normal OMAP mailbox controller behavior on the sub-mailboxes used to communicate with the WkupM3 remote processor. This also requires the wkup_m3_ipc driver to adjust its mailbox usage logic to run the Tx state machine. NOTE: - AM43xx does not communicate with WkupM3 for CPU Idle, so is not affected by this behavior. But, it uses the same IPC driver for PM suspend/resume functionality, so requires the quirk as well, because of changes to the common wkup_m3_ipc driver. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [s-anna@ti.com: revise logic and update comments/patch description] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2015-09-23 03:14:52 +03:00
static int omap_mbox_chan_send_data(struct mbox_chan *chan, void *data)
{
struct omap_mbox *mbox = mbox_chan_to_omap_mbox(chan);
int ret;
if (!mbox)
return -EINVAL;
if (mbox->send_no_irq)
ret = omap_mbox_chan_send_noirq(mbox, data);
else
ret = omap_mbox_chan_send(mbox, data);
return ret;
}
static const struct mbox_chan_ops omap_mbox_chan_ops = {
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
.startup = omap_mbox_chan_startup,
.send_data = omap_mbox_chan_send_data,
.shutdown = omap_mbox_chan_shutdown,
};
static const struct of_device_id omap_mailbox_of_match[] = {
{
.compatible = "ti,omap2-mailbox",
.data = (void *)MBOX_INTR_CFG_TYPE1,
},
{
.compatible = "ti,omap3-mailbox",
.data = (void *)MBOX_INTR_CFG_TYPE1,
},
{
.compatible = "ti,omap4-mailbox",
.data = (void *)MBOX_INTR_CFG_TYPE2,
},
{
/* end */
},
};
MODULE_DEVICE_TABLE(of, omap_mailbox_of_match);
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
static struct mbox_chan *omap_mbox_of_xlate(struct mbox_controller *controller,
const struct of_phandle_args *sp)
{
phandle phandle = sp->args[0];
struct device_node *node;
struct omap_mbox_device *mdev;
struct omap_mbox *mbox;
mdev = container_of(controller, struct omap_mbox_device, controller);
if (WARN_ON(!mdev))
return ERR_PTR(-EINVAL);
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
node = of_find_node_by_phandle(phandle);
if (!node) {
pr_err("%s: could not find node phandle 0x%x\n",
__func__, phandle);
return ERR_PTR(-ENODEV);
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
}
mbox = omap_mbox_device_find(mdev, node->name);
of_node_put(node);
return mbox ? mbox->chan : ERR_PTR(-ENOENT);
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
}
static int omap_mbox_probe(struct platform_device *pdev)
{
struct resource *mem;
int ret;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
struct mbox_chan *chnls;
struct omap_mbox **list, *mbox, *mboxblk;
struct omap_mbox_pdata *pdata = pdev->dev.platform_data;
struct omap_mbox_dev_info *info = NULL;
struct omap_mbox_fifo_info *finfo, *finfoblk;
struct omap_mbox_device *mdev;
struct omap_mbox_fifo *fifo;
struct device_node *node = pdev->dev.of_node;
struct device_node *child;
const struct of_device_id *match;
u32 intr_type, info_count;
u32 num_users, num_fifos;
u32 tmp[3];
u32 l;
int i;
if (!node && (!pdata || !pdata->info_cnt || !pdata->info)) {
pr_err("%s: platform not supported\n", __func__);
return -ENODEV;
}
if (node) {
match = of_match_device(omap_mailbox_of_match, &pdev->dev);
if (!match)
return -ENODEV;
intr_type = (u32)match->data;
if (of_property_read_u32(node, "ti,mbox-num-users",
&num_users))
return -ENODEV;
if (of_property_read_u32(node, "ti,mbox-num-fifos",
&num_fifos))
return -ENODEV;
info_count = of_get_available_child_count(node);
if (!info_count) {
dev_err(&pdev->dev, "no available mbox devices found\n");
return -ENODEV;
}
} else { /* non-DT device creation */
info_count = pdata->info_cnt;
info = pdata->info;
intr_type = pdata->intr_type;
num_users = pdata->num_users;
num_fifos = pdata->num_fifos;
}
finfoblk = devm_kzalloc(&pdev->dev, info_count * sizeof(*finfoblk),
GFP_KERNEL);
if (!finfoblk)
return -ENOMEM;
finfo = finfoblk;
child = NULL;
for (i = 0; i < info_count; i++, finfo++) {
if (node) {
child = of_get_next_available_child(node, child);
ret = of_property_read_u32_array(child, "ti,mbox-tx",
tmp, ARRAY_SIZE(tmp));
if (ret)
return ret;
finfo->tx_id = tmp[0];
finfo->tx_irq = tmp[1];
finfo->tx_usr = tmp[2];
ret = of_property_read_u32_array(child, "ti,mbox-rx",
tmp, ARRAY_SIZE(tmp));
if (ret)
return ret;
finfo->rx_id = tmp[0];
finfo->rx_irq = tmp[1];
finfo->rx_usr = tmp[2];
finfo->name = child->name;
mailbox/omap: Add ti,mbox-send-noirq quirk to fix AM33xx CPU Idle The mailbox framework controls the transmission queue and requires either its controller implementations or clients to run the state machine for the Tx queue. The OMAP mailbox controller uses a Tx-ready interrupt as the equivalent of a Tx-done interrupt to run this Tx queue state-machine. The WkupM3 processor on AM33xx and AM43xx SoCs is used to offload certain PM tasks, like doing the necessary operations for Device PM suspend/resume or for entering lower c-states during cpuidle. The CPUIdle on AM33xx requires the messages to be sent without having to trigger the Tx-ready interrupts, as the interrupt would immediately terminate the CPUIdle operation. Support for this has been added by introducing a DT quirk, "ti,mbox-send-noirq" and using it to modify the normal OMAP mailbox controller behavior on the sub-mailboxes used to communicate with the WkupM3 remote processor. This also requires the wkup_m3_ipc driver to adjust its mailbox usage logic to run the Tx state machine. NOTE: - AM43xx does not communicate with WkupM3 for CPU Idle, so is not affected by this behavior. But, it uses the same IPC driver for PM suspend/resume functionality, so requires the quirk as well, because of changes to the common wkup_m3_ipc driver. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [s-anna@ti.com: revise logic and update comments/patch description] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2015-09-23 03:14:52 +03:00
if (of_find_property(child, "ti,mbox-send-noirq", NULL))
finfo->send_no_irq = true;
} else {
finfo->tx_id = info->tx_id;
finfo->rx_id = info->rx_id;
finfo->tx_usr = info->usr_id;
finfo->tx_irq = info->irq_id;
finfo->rx_usr = info->usr_id;
finfo->rx_irq = info->irq_id;
finfo->name = info->name;
info++;
}
if (finfo->tx_id >= num_fifos || finfo->rx_id >= num_fifos ||
finfo->tx_usr >= num_users || finfo->rx_usr >= num_users)
return -EINVAL;
}
mdev = devm_kzalloc(&pdev->dev, sizeof(*mdev), GFP_KERNEL);
if (!mdev)
return -ENOMEM;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mdev->mbox_base = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(mdev->mbox_base))
return PTR_ERR(mdev->mbox_base);
/* allocate one extra for marking end of list */
list = devm_kzalloc(&pdev->dev, (info_count + 1) * sizeof(*list),
GFP_KERNEL);
if (!list)
return -ENOMEM;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
chnls = devm_kzalloc(&pdev->dev, (info_count + 1) * sizeof(*chnls),
GFP_KERNEL);
if (!chnls)
return -ENOMEM;
mboxblk = devm_kzalloc(&pdev->dev, info_count * sizeof(*mbox),
GFP_KERNEL);
if (!mboxblk)
return -ENOMEM;
mbox = mboxblk;
finfo = finfoblk;
for (i = 0; i < info_count; i++, finfo++) {
fifo = &mbox->tx_fifo;
fifo->msg = MAILBOX_MESSAGE(finfo->tx_id);
fifo->fifo_stat = MAILBOX_FIFOSTATUS(finfo->tx_id);
fifo->intr_bit = MAILBOX_IRQ_NOTFULL(finfo->tx_id);
fifo->irqenable = MAILBOX_IRQENABLE(intr_type, finfo->tx_usr);
fifo->irqstatus = MAILBOX_IRQSTATUS(intr_type, finfo->tx_usr);
fifo->irqdisable = MAILBOX_IRQDISABLE(intr_type, finfo->tx_usr);
fifo = &mbox->rx_fifo;
fifo->msg = MAILBOX_MESSAGE(finfo->rx_id);
fifo->msg_stat = MAILBOX_MSGSTATUS(finfo->rx_id);
fifo->intr_bit = MAILBOX_IRQ_NEWMSG(finfo->rx_id);
fifo->irqenable = MAILBOX_IRQENABLE(intr_type, finfo->rx_usr);
fifo->irqstatus = MAILBOX_IRQSTATUS(intr_type, finfo->rx_usr);
fifo->irqdisable = MAILBOX_IRQDISABLE(intr_type, finfo->rx_usr);
mailbox/omap: Add ti,mbox-send-noirq quirk to fix AM33xx CPU Idle The mailbox framework controls the transmission queue and requires either its controller implementations or clients to run the state machine for the Tx queue. The OMAP mailbox controller uses a Tx-ready interrupt as the equivalent of a Tx-done interrupt to run this Tx queue state-machine. The WkupM3 processor on AM33xx and AM43xx SoCs is used to offload certain PM tasks, like doing the necessary operations for Device PM suspend/resume or for entering lower c-states during cpuidle. The CPUIdle on AM33xx requires the messages to be sent without having to trigger the Tx-ready interrupts, as the interrupt would immediately terminate the CPUIdle operation. Support for this has been added by introducing a DT quirk, "ti,mbox-send-noirq" and using it to modify the normal OMAP mailbox controller behavior on the sub-mailboxes used to communicate with the WkupM3 remote processor. This also requires the wkup_m3_ipc driver to adjust its mailbox usage logic to run the Tx state machine. NOTE: - AM43xx does not communicate with WkupM3 for CPU Idle, so is not affected by this behavior. But, it uses the same IPC driver for PM suspend/resume functionality, so requires the quirk as well, because of changes to the common wkup_m3_ipc driver. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [s-anna@ti.com: revise logic and update comments/patch description] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2015-09-23 03:14:52 +03:00
mbox->send_no_irq = finfo->send_no_irq;
mbox->intr_type = intr_type;
mbox->parent = mdev;
mbox->name = finfo->name;
mbox->irq = platform_get_irq(pdev, finfo->tx_irq);
if (mbox->irq < 0)
return mbox->irq;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
mbox->chan = &chnls[i];
chnls[i].con_priv = mbox;
list[i] = mbox++;
}
mutex_init(&mdev->cfg_lock);
mdev->dev = &pdev->dev;
mdev->num_users = num_users;
mdev->num_fifos = num_fifos;
mdev->mboxes = list;
mailbox/omap: adapt to the new mailbox framework The OMAP mailbox driver and its existing clients (remoteproc for OMAP4+) are adapted to use the generic mailbox framework. The main changes for the adaptation are: - The tasklet used for Tx is replaced with the state machine from the generic mailbox framework. The workqueue used for processing the received messages stays intact for minimizing the effects on the OMAP mailbox clients. - The existing exported client API, omap_mbox_get, omap_mbox_put and omap_mbox_send_msg are deleted, as the framework provides equivalent functionality. A OMAP-specific omap_mbox_request_channel is added though to support non-DT way of requesting mailboxes. - The OMAP mailbox driver is integrated with the mailbox framework through the proper implementations of mbox_chan_ops, except for .last_tx_done and .peek_data. The OMAP mailbox driver does not need these ops, as it is completely interrupt driven. - The OMAP mailbox driver uses a custom of_xlate controller ops that allows phandles for the pargs specifier instead of indexing to avoid any channel registration order dependencies. - The new framework does not support multiple clients operating on a single channel, so the reference counting logic is simplified. - The remoteproc driver (current client) is adapted to use the new API. The notifier callbacks used within this client is replaced with the regular callbacks from the newer framework. - The exported OMAP mailbox API are limited to omap_mbox_save_ctx, omap_mbox_restore_ctx, omap_mbox_enable_irq & omap_mbox_disable_irq, with the signature modified to take in the new mbox_chan handle instead of the OMAP specific omap_mbox handle. The first 2 will be removed when the OMAP mailbox driver is adapted to runtime_pm. The other exported API omap_mbox_request_channel will be removed once existing legacy users are converted to DT. Signed-off-by: Suman Anna <s-anna@ti.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2014-11-04 02:05:50 +03:00
/* OMAP does not have a Tx-Done IRQ, but rather a Tx-Ready IRQ */
mdev->controller.txdone_irq = true;
mdev->controller.dev = mdev->dev;
mdev->controller.ops = &omap_mbox_chan_ops;
mdev->controller.chans = chnls;
mdev->controller.num_chans = info_count;
mdev->controller.of_xlate = omap_mbox_of_xlate;
ret = omap_mbox_register(mdev);
if (ret)
return ret;
platform_set_drvdata(pdev, mdev);
pm_runtime_enable(mdev->dev);
ret = pm_runtime_get_sync(mdev->dev);
if (ret < 0) {
pm_runtime_put_noidle(mdev->dev);
goto unregister;
}
/*
* just print the raw revision register, the format is not
* uniform across all SoCs
*/
l = mbox_read_reg(mdev, MAILBOX_REVISION);
dev_info(mdev->dev, "omap mailbox rev 0x%x\n", l);
ret = pm_runtime_put_sync(mdev->dev);
if (ret < 0)
goto unregister;
devm_kfree(&pdev->dev, finfoblk);
return 0;
unregister:
pm_runtime_disable(mdev->dev);
omap_mbox_unregister(mdev);
return ret;
}
static int omap_mbox_remove(struct platform_device *pdev)
{
struct omap_mbox_device *mdev = platform_get_drvdata(pdev);
pm_runtime_disable(mdev->dev);
omap_mbox_unregister(mdev);
return 0;
}
static struct platform_driver omap_mbox_driver = {
.probe = omap_mbox_probe,
.remove = omap_mbox_remove,
.driver = {
.name = "omap-mailbox",
.of_match_table = of_match_ptr(omap_mailbox_of_match),
},
};
static int __init omap_mbox_init(void)
{
int err;
err = class_register(&omap_mbox_class);
if (err)
return err;
/* kfifo size sanity check: alignment and minimal size */
mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(mbox_msg_t));
mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size,
sizeof(mbox_msg_t));
return platform_driver_register(&omap_mbox_driver);
}
subsys_initcall(omap_mbox_init);
static void __exit omap_mbox_exit(void)
{
platform_driver_unregister(&omap_mbox_driver);
class_unregister(&omap_mbox_class);
}
module_exit(omap_mbox_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging");
MODULE_AUTHOR("Toshihiro Kobayashi");
MODULE_AUTHOR("Hiroshi DOYU");