2009-08-17 18:18:08 +04:00
# include "builtin.h"
2010-08-05 17:51:38 +04:00
# include "perf.h"
2009-08-17 18:18:08 +04:00
# include "util/cache.h"
2010-08-05 17:51:38 +04:00
# include "util/debug.h"
# include "util/exec_cmd.h"
# include "util/header.h"
# include "util/parse-options.h"
# include "util/session.h"
2009-08-17 18:18:08 +04:00
# include "util/symbol.h"
# include "util/thread.h"
2009-11-28 12:11:00 +03:00
# include "util/trace-event.h"
perf trace record: handle commands correctly
Because the perf-trace shell scripts hard-coded the use of the
perf-record system-wide param, a perf trace record session was always
system wide, even if it was given a command.
If given a command, perf trace record now only records the events for
the command, as users expect.
If no command is given, or if the '-a' option is used, the recorded
events are system-wide, as before.
root@tropicana:~# perf trace record syscall-counts ls -al
root@tropicana:~# perf trace
ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0)
ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0)
root@tropicana:~# perf trace record syscall-counts -a ls -al
root@tropicana:~# perf trace
npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0)
ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:15:43 +03:00
# include "util/parse-options.h"
2010-08-05 17:51:38 +04:00
# include "util/util.h"
2009-08-17 18:18:08 +04:00
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
static char const * script_name ;
static char const * generate_script_lang ;
2010-05-27 18:27:47 +04:00
static bool debug_mode ;
2010-04-24 03:55:09 +04:00
static u64 last_timestamp ;
2010-05-27 17:46:25 +04:00
static u64 nr_unordered ;
perf trace record: handle commands correctly
Because the perf-trace shell scripts hard-coded the use of the
perf-record system-wide param, a perf trace record session was always
system wide, even if it was given a command.
If given a command, perf trace record now only records the events for
the command, as users expect.
If no command is given, or if the '-a' option is used, the recorded
events are system-wide, as before.
root@tropicana:~# perf trace record syscall-counts ls -al
root@tropicana:~# perf trace
ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0)
ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0)
root@tropicana:~# perf trace record syscall-counts -a ls -al
root@tropicana:~# perf trace
npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0)
ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:15:43 +03:00
extern const struct option record_options [ ] ;
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
2011-03-10 08:23:25 +03:00
static void print_sample_start ( struct perf_sample * sample ,
struct thread * thread )
{
int type ;
struct event * event ;
const char * evname = NULL ;
unsigned long secs ;
unsigned long usecs ;
unsigned long long nsecs = sample - > time ;
if ( latency_format )
printf ( " %8.8s-%-5d %3d " , thread - > comm , sample - > tid , sample - > cpu ) ;
else
printf ( " %16s-%-5d [%03d] " , thread - > comm , sample - > tid , sample - > cpu ) ;
secs = nsecs / NSECS_PER_SEC ;
nsecs - = secs * NSECS_PER_SEC ;
usecs = nsecs / NSECS_PER_USEC ;
printf ( " %5lu.%06lu: " , secs , usecs ) ;
type = trace_parse_common_type ( sample - > raw_data ) ;
event = trace_find_event ( type ) ;
if ( event )
evname = event - > name ;
printf ( " %s: " , evname ? evname : " (unknown) " ) ;
}
2011-03-10 08:23:23 +03:00
static void process_event ( union perf_event * event __unused ,
struct perf_sample * sample ,
struct perf_session * session __unused ,
struct thread * thread )
{
2011-03-10 08:23:25 +03:00
print_sample_start ( sample , thread ) ;
print_trace_event ( sample - > cpu , sample - > raw_data , sample - > raw_size ) ;
printf ( " \n " ) ;
2011-03-10 08:23:23 +03:00
}
2009-12-15 11:53:35 +03:00
static int default_start_script ( const char * script __unused ,
int argc __unused ,
const char * * argv __unused )
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
{
return 0 ;
}
static int default_stop_script ( void )
{
return 0 ;
}
2009-12-15 11:53:35 +03:00
static int default_generate_script ( const char * outfile __unused )
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
{
return 0 ;
}
static struct scripting_ops default_scripting_ops = {
. start_script = default_start_script ,
. stop_script = default_stop_script ,
2011-03-10 08:23:23 +03:00
. process_event = process_event ,
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
. generate_script = default_generate_script ,
} ;
static struct scripting_ops * scripting_ops ;
static void setup_scripting ( void )
{
2009-11-25 10:15:48 +03:00
setup_perl_scripting ( ) ;
2010-01-27 11:27:57 +03:00
setup_python_scripting ( ) ;
2009-11-25 10:15:48 +03:00
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
scripting_ops = & default_scripting_ops ;
}
static int cleanup_scripting ( void )
{
2010-11-16 20:45:39 +03:00
pr_debug ( " \n perf script stopped \n " ) ;
2010-05-10 08:46:57 +04:00
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
return scripting_ops - > stop_script ( ) ;
}
static char const * input_name = " perf.data " ;
2009-08-17 18:18:08 +04:00
2011-01-29 19:01:45 +03:00
static int process_sample_event ( union perf_event * event ,
struct perf_sample * sample ,
perf session: Parse sample earlier
At perf_session__process_event, so that we reduce the number of lines in eache
tool sample processing routine that now receives a sample_data pointer already
parsed.
This will also be useful in the next patch, where we'll allow sample the
identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu,
timestamp) just after before every event.
Also validate callchains in perf_session__process_event, i.e. as early as
possible, and keep a counter of the number of events discarded due to invalid
callchains, warning the user about it if it happens.
There is an assumption that was kept that all events have the same sample_type,
that will be dealt with in the future, when this preexisting limitation will be
removed.
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 19:10:21 +03:00
struct perf_session * session )
2009-08-17 18:18:08 +04:00
{
perf session: Parse sample earlier
At perf_session__process_event, so that we reduce the number of lines in eache
tool sample processing routine that now receives a sample_data pointer already
parsed.
This will also be useful in the next patch, where we'll allow sample the
identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu,
timestamp) just after before every event.
Also validate callchains in perf_session__process_event, i.e. as early as
possible, and keep a counter of the number of events discarded due to invalid
callchains, warning the user about it if it happens.
There is an assumption that was kept that all events have the same sample_type,
that will be dealt with in the future, when this preexisting limitation will be
removed.
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 19:10:21 +03:00
struct thread * thread = perf_session__findnew ( session , event - > ip . pid ) ;
2009-09-03 14:00:22 +04:00
2009-08-17 18:18:08 +04:00
if ( thread = = NULL ) {
2009-10-21 23:34:06 +04:00
pr_debug ( " problem processing %d event, skipping it. \n " ,
event - > header . type ) ;
2009-08-17 18:18:08 +04:00
return - 1 ;
}
2009-12-14 19:23:00 +03:00
if ( session - > sample_type & PERF_SAMPLE_RAW ) {
2010-05-27 18:27:47 +04:00
if ( debug_mode ) {
perf session: Parse sample earlier
At perf_session__process_event, so that we reduce the number of lines in eache
tool sample processing routine that now receives a sample_data pointer already
parsed.
This will also be useful in the next patch, where we'll allow sample the
identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu,
timestamp) just after before every event.
Also validate callchains in perf_session__process_event, i.e. as early as
possible, and keep a counter of the number of events discarded due to invalid
callchains, warning the user about it if it happens.
There is an assumption that was kept that all events have the same sample_type,
that will be dealt with in the future, when this preexisting limitation will be
removed.
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 19:10:21 +03:00
if ( sample - > time < last_timestamp ) {
2011-01-23 01:37:02 +03:00
pr_err ( " Samples misordered, previous: % " PRIu64
" this: % " PRIu64 " \n " , last_timestamp ,
perf session: Parse sample earlier
At perf_session__process_event, so that we reduce the number of lines in eache
tool sample processing routine that now receives a sample_data pointer already
parsed.
This will also be useful in the next patch, where we'll allow sample the
identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu,
timestamp) just after before every event.
Also validate callchains in perf_session__process_event, i.e. as early as
possible, and keep a counter of the number of events discarded due to invalid
callchains, warning the user about it if it happens.
There is an assumption that was kept that all events have the same sample_type,
that will be dealt with in the future, when this preexisting limitation will be
removed.
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 19:10:21 +03:00
sample - > time ) ;
2010-05-27 17:46:25 +04:00
nr_unordered + + ;
2010-04-24 03:55:09 +04:00
}
perf session: Parse sample earlier
At perf_session__process_event, so that we reduce the number of lines in eache
tool sample processing routine that now receives a sample_data pointer already
parsed.
This will also be useful in the next patch, where we'll allow sample the
identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu,
timestamp) just after before every event.
Also validate callchains in perf_session__process_event, i.e. as early as
possible, and keep a counter of the number of events discarded due to invalid
callchains, warning the user about it if it happens.
There is an assumption that was kept that all events have the same sample_type,
that will be dealt with in the future, when this preexisting limitation will be
removed.
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 19:10:21 +03:00
last_timestamp = sample - > time ;
2010-05-27 17:46:25 +04:00
return 0 ;
2010-04-24 03:55:09 +04:00
}
2011-03-10 08:23:23 +03:00
scripting_ops - > process_event ( event , sample , session , thread ) ;
2009-08-17 18:18:08 +04:00
}
perf session: Parse sample earlier
At perf_session__process_event, so that we reduce the number of lines in eache
tool sample processing routine that now receives a sample_data pointer already
parsed.
This will also be useful in the next patch, where we'll allow sample the
identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu,
timestamp) just after before every event.
Also validate callchains in perf_session__process_event, i.e. as early as
possible, and keep a counter of the number of events discarded due to invalid
callchains, warning the user about it if it happens.
There is an assumption that was kept that all events have the same sample_type,
that will be dealt with in the future, when this preexisting limitation will be
removed.
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 19:10:21 +03:00
session - > hists . stats . total_period + = sample - > period ;
2009-08-17 18:18:08 +04:00
return 0 ;
}
2009-12-14 00:50:25 +03:00
static struct perf_event_ops event_ops = {
2011-01-29 19:01:45 +03:00
. sample = process_sample_event ,
. comm = perf_event__process_comm ,
. attr = perf_event__process_attr ,
. event_type = perf_event__process_event_type ,
. tracing_data = perf_event__process_tracing_data ,
. build_id = perf_event__process_build_id ,
2010-04-24 02:38:33 +04:00
. ordered_samples = true ,
2011-01-29 19:01:45 +03:00
. ordering_requires_timestamps = true ,
2009-10-07 14:47:31 +04:00
} ;
2010-04-02 08:59:18 +04:00
extern volatile int session_done ;
static void sig_handler ( int sig __unused )
{
session_done = 1 ;
}
2010-11-16 20:45:39 +03:00
static int __cmd_script ( struct perf_session * session )
2009-08-17 18:18:08 +04:00
{
2010-05-27 17:46:25 +04:00
int ret ;
2010-04-02 08:59:18 +04:00
signal ( SIGINT , sig_handler ) ;
2010-05-27 17:46:25 +04:00
ret = perf_session__process_events ( session , & event_ops ) ;
2011-01-04 21:27:30 +03:00
if ( debug_mode )
2011-01-23 01:37:02 +03:00
pr_err ( " Misordered timestamps: % " PRIu64 " \n " , nr_unordered ) ;
2010-05-27 17:46:25 +04:00
return ret ;
2009-08-17 18:18:08 +04:00
}
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
struct script_spec {
struct list_head node ;
struct scripting_ops * ops ;
char spec [ 0 ] ;
} ;
2011-01-04 21:32:52 +03:00
static LIST_HEAD ( script_specs ) ;
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
static struct script_spec * script_spec__new ( const char * spec ,
struct scripting_ops * ops )
{
struct script_spec * s = malloc ( sizeof ( * s ) + strlen ( spec ) + 1 ) ;
if ( s ! = NULL ) {
strcpy ( s - > spec , spec ) ;
s - > ops = ops ;
}
return s ;
}
static void script_spec__delete ( struct script_spec * s )
{
free ( s - > spec ) ;
free ( s ) ;
}
static void script_spec__add ( struct script_spec * s )
{
list_add_tail ( & s - > node , & script_specs ) ;
}
static struct script_spec * script_spec__find ( const char * spec )
{
struct script_spec * s ;
list_for_each_entry ( s , & script_specs , node )
if ( strcasecmp ( s - > spec , spec ) = = 0 )
return s ;
return NULL ;
}
static struct script_spec * script_spec__findnew ( const char * spec ,
struct scripting_ops * ops )
{
struct script_spec * s = script_spec__find ( spec ) ;
if ( s )
return s ;
s = script_spec__new ( spec , ops ) ;
if ( ! s )
goto out_delete_spec ;
script_spec__add ( s ) ;
return s ;
out_delete_spec :
script_spec__delete ( s ) ;
return NULL ;
}
int script_spec_register ( const char * spec , struct scripting_ops * ops )
{
struct script_spec * s ;
s = script_spec__find ( spec ) ;
if ( s )
return - 1 ;
s = script_spec__findnew ( spec , ops ) ;
if ( ! s )
return - 1 ;
return 0 ;
}
static struct scripting_ops * script_spec__lookup ( const char * spec )
{
struct script_spec * s = script_spec__find ( spec ) ;
if ( ! s )
return NULL ;
return s - > ops ;
}
static void list_available_languages ( void )
{
struct script_spec * s ;
fprintf ( stderr , " \n " ) ;
fprintf ( stderr , " Scripting language extensions (used in "
2010-11-16 20:45:39 +03:00
" perf script -s [spec:]script.[spec]): \n \n " ) ;
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
list_for_each_entry ( s , & script_specs , node )
fprintf ( stderr , " %-42s [%s] \n " , s - > spec , s - > ops - > name ) ;
fprintf ( stderr , " \n " ) ;
}
static int parse_scriptname ( const struct option * opt __used ,
const char * str , int unset __used )
{
char spec [ PATH_MAX ] ;
const char * script , * ext ;
int len ;
2010-01-27 11:27:52 +03:00
if ( strcmp ( str , " lang " ) = = 0 ) {
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
list_available_languages ( ) ;
2010-01-27 11:27:52 +03:00
exit ( 0 ) ;
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
}
script = strchr ( str , ' : ' ) ;
if ( script ) {
len = script - str ;
if ( len > = PATH_MAX ) {
fprintf ( stderr , " invalid language specifier " ) ;
return - 1 ;
}
strncpy ( spec , str , len ) ;
spec [ len ] = ' \0 ' ;
scripting_ops = script_spec__lookup ( spec ) ;
if ( ! scripting_ops ) {
fprintf ( stderr , " invalid language specifier " ) ;
return - 1 ;
}
script + + ;
} else {
script = str ;
2010-10-10 19:11:02 +04:00
ext = strrchr ( script , ' . ' ) ;
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
if ( ! ext ) {
fprintf ( stderr , " invalid script extension " ) ;
return - 1 ;
}
scripting_ops = script_spec__lookup ( + + ext ) ;
if ( ! scripting_ops ) {
fprintf ( stderr , " invalid script extension " ) ;
return - 1 ;
}
}
script_name = strdup ( script ) ;
return 0 ;
}
2010-11-21 19:09:39 +03:00
/* Helper function for filesystems that return a dent->d_type DT_UNKNOWN */
static int is_directory ( const char * base_path , const struct dirent * dent )
{
char path [ PATH_MAX ] ;
struct stat st ;
sprintf ( path , " %s/%s " , base_path , dent - > d_name ) ;
if ( stat ( path , & st ) )
return 0 ;
return S_ISDIR ( st . st_mode ) ;
}
# define for_each_lang(scripts_path, scripts_dir, lang_dirent, lang_next)\
2009-12-15 11:53:38 +03:00
while ( ! readdir_r ( scripts_dir , & lang_dirent , & lang_next ) & & \
lang_next ) \
2010-11-21 19:09:39 +03:00
if ( ( lang_dirent . d_type = = DT_DIR | | \
( lang_dirent . d_type = = DT_UNKNOWN & & \
is_directory ( scripts_path , & lang_dirent ) ) ) & & \
2009-12-15 11:53:38 +03:00
( strcmp ( lang_dirent . d_name , " . " ) ) & & \
( strcmp ( lang_dirent . d_name , " .. " ) ) )
2010-11-21 19:09:39 +03:00
# define for_each_script(lang_path, lang_dir, script_dirent, script_next)\
2009-12-15 11:53:38 +03:00
while ( ! readdir_r ( lang_dir , & script_dirent , & script_next ) & & \
script_next ) \
2010-11-21 19:09:39 +03:00
if ( script_dirent . d_type ! = DT_DIR & & \
( script_dirent . d_type ! = DT_UNKNOWN | | \
! is_directory ( lang_path , & script_dirent ) ) )
2009-12-15 11:53:38 +03:00
# define RECORD_SUFFIX "-record"
# define REPORT_SUFFIX "-report"
struct script_desc {
struct list_head node ;
char * name ;
char * half_liner ;
char * args ;
} ;
2011-01-04 21:32:52 +03:00
static LIST_HEAD ( script_descs ) ;
2009-12-15 11:53:38 +03:00
static struct script_desc * script_desc__new ( const char * name )
{
struct script_desc * s = zalloc ( sizeof ( * s ) ) ;
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
if ( s ! = NULL & & name )
2009-12-15 11:53:38 +03:00
s - > name = strdup ( name ) ;
return s ;
}
static void script_desc__delete ( struct script_desc * s )
{
free ( s - > name ) ;
2010-11-10 16:52:32 +03:00
free ( s - > half_liner ) ;
free ( s - > args ) ;
2009-12-15 11:53:38 +03:00
free ( s ) ;
}
static void script_desc__add ( struct script_desc * s )
{
list_add_tail ( & s - > node , & script_descs ) ;
}
static struct script_desc * script_desc__find ( const char * name )
{
struct script_desc * s ;
list_for_each_entry ( s , & script_descs , node )
if ( strcasecmp ( s - > name , name ) = = 0 )
return s ;
return NULL ;
}
static struct script_desc * script_desc__findnew ( const char * name )
{
struct script_desc * s = script_desc__find ( name ) ;
if ( s )
return s ;
s = script_desc__new ( name ) ;
if ( ! s )
goto out_delete_desc ;
script_desc__add ( s ) ;
return s ;
out_delete_desc :
script_desc__delete ( s ) ;
return NULL ;
}
2010-12-03 18:52:01 +03:00
static const char * ends_with ( const char * str , const char * suffix )
2009-12-15 11:53:38 +03:00
{
size_t suffix_len = strlen ( suffix ) ;
2010-12-03 18:52:01 +03:00
const char * p = str ;
2009-12-15 11:53:38 +03:00
if ( strlen ( str ) > suffix_len ) {
p = str + strlen ( str ) - suffix_len ;
if ( ! strncmp ( p , suffix , suffix_len ) )
return p ;
}
return NULL ;
}
static char * ltrim ( char * str )
{
int len = strlen ( str ) ;
while ( len & & isspace ( * str ) ) {
len - - ;
str + + ;
}
return str ;
}
static int read_script_info ( struct script_desc * desc , const char * filename )
{
char line [ BUFSIZ ] , * p ;
FILE * fp ;
fp = fopen ( filename , " r " ) ;
if ( ! fp )
return - 1 ;
while ( fgets ( line , sizeof ( line ) , fp ) ) {
p = ltrim ( line ) ;
if ( strlen ( p ) = = 0 )
continue ;
if ( * p ! = ' # ' )
continue ;
p + + ;
if ( strlen ( p ) & & * p = = ' ! ' )
continue ;
p = ltrim ( p ) ;
if ( strlen ( p ) & & p [ strlen ( p ) - 1 ] = = ' \n ' )
p [ strlen ( p ) - 1 ] = ' \0 ' ;
if ( ! strncmp ( p , " description: " , strlen ( " description: " ) ) ) {
p + = strlen ( " description: " ) ;
desc - > half_liner = strdup ( ltrim ( p ) ) ;
continue ;
}
if ( ! strncmp ( p , " args: " , strlen ( " args: " ) ) ) {
p + = strlen ( " args: " ) ;
desc - > args = strdup ( ltrim ( p ) ) ;
continue ;
}
}
fclose ( fp ) ;
return 0 ;
}
static int list_available_scripts ( const struct option * opt __used ,
const char * s __used , int unset __used )
{
struct dirent * script_next , * lang_next , script_dirent , lang_dirent ;
char scripts_path [ MAXPATHLEN ] ;
DIR * scripts_dir , * lang_dir ;
char script_path [ MAXPATHLEN ] ;
char lang_path [ MAXPATHLEN ] ;
struct script_desc * desc ;
char first_half [ BUFSIZ ] ;
char * script_root ;
char * str ;
snprintf ( scripts_path , MAXPATHLEN , " %s/scripts " , perf_exec_path ( ) ) ;
scripts_dir = opendir ( scripts_path ) ;
if ( ! scripts_dir )
return - 1 ;
2010-11-21 19:09:39 +03:00
for_each_lang ( scripts_path , scripts_dir , lang_dirent , lang_next ) {
2009-12-15 11:53:38 +03:00
snprintf ( lang_path , MAXPATHLEN , " %s/%s/bin " , scripts_path ,
lang_dirent . d_name ) ;
lang_dir = opendir ( lang_path ) ;
if ( ! lang_dir )
continue ;
2010-11-21 19:09:39 +03:00
for_each_script ( lang_path , lang_dir , script_dirent , script_next ) {
2009-12-15 11:53:38 +03:00
script_root = strdup ( script_dirent . d_name ) ;
2010-12-03 18:52:01 +03:00
str = ( char * ) ends_with ( script_root , REPORT_SUFFIX ) ;
2009-12-15 11:53:38 +03:00
if ( str ) {
* str = ' \0 ' ;
desc = script_desc__findnew ( script_root ) ;
snprintf ( script_path , MAXPATHLEN , " %s/%s " ,
lang_path , script_dirent . d_name ) ;
read_script_info ( desc , script_path ) ;
}
free ( script_root ) ;
}
}
fprintf ( stdout , " List of available trace scripts: \n " ) ;
list_for_each_entry ( desc , & script_descs , node ) {
sprintf ( first_half , " %s %s " , desc - > name ,
desc - > args ? desc - > args : " " ) ;
fprintf ( stdout , " %-36s %s \n " , first_half ,
desc - > half_liner ? desc - > half_liner : " " ) ;
}
exit ( 0 ) ;
}
2009-12-15 11:53:39 +03:00
static char * get_script_path ( const char * script_root , const char * suffix )
{
struct dirent * script_next , * lang_next , script_dirent , lang_dirent ;
char scripts_path [ MAXPATHLEN ] ;
char script_path [ MAXPATHLEN ] ;
DIR * scripts_dir , * lang_dir ;
char lang_path [ MAXPATHLEN ] ;
char * str , * __script_root ;
char * path = NULL ;
snprintf ( scripts_path , MAXPATHLEN , " %s/scripts " , perf_exec_path ( ) ) ;
scripts_dir = opendir ( scripts_path ) ;
if ( ! scripts_dir )
return NULL ;
2010-11-21 19:09:39 +03:00
for_each_lang ( scripts_path , scripts_dir , lang_dirent , lang_next ) {
2009-12-15 11:53:39 +03:00
snprintf ( lang_path , MAXPATHLEN , " %s/%s/bin " , scripts_path ,
lang_dirent . d_name ) ;
lang_dir = opendir ( lang_path ) ;
if ( ! lang_dir )
continue ;
2010-11-21 19:09:39 +03:00
for_each_script ( lang_path , lang_dir , script_dirent , script_next ) {
2009-12-15 11:53:39 +03:00
__script_root = strdup ( script_dirent . d_name ) ;
2010-12-03 18:52:01 +03:00
str = ( char * ) ends_with ( __script_root , suffix ) ;
2009-12-15 11:53:39 +03:00
if ( str ) {
* str = ' \0 ' ;
if ( strcmp ( __script_root , script_root ) )
continue ;
snprintf ( script_path , MAXPATHLEN , " %s/%s " ,
lang_path , script_dirent . d_name ) ;
path = strdup ( script_path ) ;
free ( __script_root ) ;
break ;
}
free ( __script_root ) ;
}
}
return path ;
}
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
static bool is_top_script ( const char * script_path )
{
2010-12-03 18:52:01 +03:00
return ends_with ( script_path , " top " ) = = NULL ? false : true ;
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
}
static int has_required_arg ( char * script_path )
{
struct script_desc * desc ;
int n_args = 0 ;
char * p ;
desc = script_desc__new ( NULL ) ;
if ( read_script_info ( desc , script_path ) )
goto out ;
if ( ! desc - > args )
goto out ;
for ( p = desc - > args ; * p ; p + + )
if ( * p = = ' < ' )
n_args + + ;
out :
script_desc__delete ( desc ) ;
return n_args ;
}
2010-11-16 20:45:39 +03:00
static const char * const script_usage [ ] = {
" perf script [<options>] " ,
" perf script [<options>] record <script> [<record-options>] <command> " ,
" perf script [<options>] report <script> [script-args] " ,
" perf script [<options>] <script> [<record-options>] <command> " ,
" perf script [<options>] <top-script> [script-args] " ,
2009-08-17 18:18:08 +04:00
NULL
} ;
static const struct option options [ ] = {
OPT_BOOLEAN ( ' D ' , " dump-raw-trace " , & dump_trace ,
" dump raw trace in ASCII " ) ,
2010-04-13 12:37:33 +04:00
OPT_INCR ( ' v ' , " verbose " , & verbose ,
2009-08-17 18:18:08 +04:00
" be more verbose (show symbol address, etc) " ) ,
2009-12-15 11:53:38 +03:00
OPT_BOOLEAN ( ' L ' , " Latency " , & latency_format ,
2009-10-14 23:43:42 +04:00
" show latency attributes (irqs/preemption disabled, etc) " ) ,
2009-12-15 11:53:38 +03:00
OPT_CALLBACK_NOOPT ( ' l ' , " list " , NULL , NULL , " list available scripts " ,
list_available_scripts ) ,
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
OPT_CALLBACK ( ' s ' , " script " , NULL , " name " ,
" script file name (lang:script name, script name, or *) " ,
parse_scriptname ) ,
OPT_STRING ( ' g ' , " gen-script " , & generate_script_lang , " lang " ,
2010-11-16 20:45:39 +03:00
" generate perf-script.xx script in specified language " ) ,
2010-01-22 16:45:29 +03:00
OPT_STRING ( ' i ' , " input " , & input_name , " file " ,
" input file name " ) ,
2010-05-27 18:27:47 +04:00
OPT_BOOLEAN ( ' d ' , " debug-mode " , & debug_mode ,
" do various checks like samples ordering and lost events " ) ,
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
2009-08-21 22:56:03 +04:00
OPT_END ( )
2009-08-17 18:18:08 +04:00
} ;
perf trace record: handle commands correctly
Because the perf-trace shell scripts hard-coded the use of the
perf-record system-wide param, a perf trace record session was always
system wide, even if it was given a command.
If given a command, perf trace record now only records the events for
the command, as users expect.
If no command is given, or if the '-a' option is used, the recorded
events are system-wide, as before.
root@tropicana:~# perf trace record syscall-counts ls -al
root@tropicana:~# perf trace
ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0)
ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0)
root@tropicana:~# perf trace record syscall-counts -a ls -al
root@tropicana:~# perf trace
npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0)
ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:15:43 +03:00
static bool have_cmd ( int argc , const char * * argv )
{
char * * __argv = malloc ( sizeof ( const char * ) * argc ) ;
if ( ! __argv )
die ( " malloc " ) ;
memcpy ( __argv , argv , sizeof ( const char * ) * argc ) ;
argc = parse_options ( argc , ( const char * * ) __argv , record_options ,
NULL , PARSE_OPT_STOP_AT_NON_OPTION ) ;
free ( __argv ) ;
return argc ! = 0 ;
}
2010-11-16 20:45:39 +03:00
int cmd_script ( int argc , const char * * argv , const char * prefix __used )
2009-08-17 18:18:08 +04:00
{
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
char * rec_script_path = NULL ;
char * rep_script_path = NULL ;
2009-12-14 00:50:24 +03:00
struct perf_session * session ;
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
char * script_path = NULL ;
2009-12-15 11:53:39 +03:00
const char * * __argv ;
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
bool system_wide ;
int i , j , err ;
2009-12-15 11:53:39 +03:00
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
setup_scripting ( ) ;
2010-11-16 20:45:39 +03:00
argc = parse_options ( argc , argv , options , script_usage ,
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
PARSE_OPT_STOP_AT_NON_OPTION ) ;
if ( argc > 1 & & ! strncmp ( argv [ 0 ] , " rec " , strlen ( " rec " ) ) ) {
rec_script_path = get_script_path ( argv [ 1 ] , RECORD_SUFFIX ) ;
if ( ! rec_script_path )
return cmd_record ( argc , argv , NULL ) ;
2009-12-15 11:53:39 +03:00
}
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
if ( argc > 1 & & ! strncmp ( argv [ 0 ] , " rep " , strlen ( " rep " ) ) ) {
rep_script_path = get_script_path ( argv [ 1 ] , REPORT_SUFFIX ) ;
if ( ! rep_script_path ) {
2009-12-15 11:53:39 +03:00
fprintf ( stderr ,
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
" Please specify a valid report script "
2010-11-16 20:45:39 +03:00
" (see 'perf script -l' for listing) \n " ) ;
2009-12-15 11:53:39 +03:00
return - 1 ;
}
}
2010-10-10 19:10:03 +04:00
/* make sure PERF_EXEC_PATH is set for scripts */
perf_set_argv_exec_path ( perf_exec_path ( ) ) ;
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
if ( argc & & ! script_name & & ! rec_script_path & & ! rep_script_path ) {
2010-04-02 08:59:25 +04:00
int live_pipe [ 2 ] ;
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
int rep_args ;
2010-04-02 08:59:25 +04:00
pid_t pid ;
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
rec_script_path = get_script_path ( argv [ 0 ] , RECORD_SUFFIX ) ;
rep_script_path = get_script_path ( argv [ 0 ] , REPORT_SUFFIX ) ;
if ( ! rec_script_path & & ! rep_script_path ) {
fprintf ( stderr , " Couldn't find script %s \n \n See perf "
2010-11-16 20:45:39 +03:00
" script -l for available scripts. \n " , argv [ 0 ] ) ;
usage_with_options ( script_usage , options ) ;
2010-04-02 08:59:25 +04:00
}
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
if ( is_top_script ( argv [ 0 ] ) ) {
rep_args = argc - 1 ;
} else {
int rec_args ;
rep_args = has_required_arg ( rep_script_path ) ;
rec_args = ( argc - 1 ) - rep_args ;
if ( rec_args < 0 ) {
fprintf ( stderr , " %s script requires options. "
2010-11-16 20:45:39 +03:00
" \n \n See perf script -l for available "
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
" scripts and options. \n " , argv [ 0 ] ) ;
2010-11-16 20:45:39 +03:00
usage_with_options ( script_usage , options ) ;
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
}
2010-04-02 08:59:25 +04:00
}
if ( pipe ( live_pipe ) < 0 ) {
perror ( " failed to create pipe " ) ;
exit ( - 1 ) ;
}
pid = fork ( ) ;
if ( pid < 0 ) {
perror ( " failed to fork " ) ;
exit ( - 1 ) ;
}
if ( ! pid ) {
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
system_wide = true ;
j = 0 ;
2010-04-02 08:59:25 +04:00
dup2 ( live_pipe [ 1 ] , 1 ) ;
close ( live_pipe [ 0 ] ) ;
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
if ( ! is_top_script ( argv [ 0 ] ) )
system_wide = ! have_cmd ( argc - rep_args ,
& argv [ rep_args ] ) ;
__argv = malloc ( ( argc + 6 ) * sizeof ( const char * ) ) ;
2010-11-10 16:52:32 +03:00
if ( ! __argv )
die ( " malloc " ) ;
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
__argv [ j + + ] = " /bin/sh " ;
__argv [ j + + ] = rec_script_path ;
if ( system_wide )
__argv [ j + + ] = " -a " ;
__argv [ j + + ] = " -q " ;
__argv [ j + + ] = " -o " ;
__argv [ j + + ] = " - " ;
for ( i = rep_args + 1 ; i < argc ; i + + )
__argv [ j + + ] = argv [ i ] ;
__argv [ j + + ] = NULL ;
2010-04-02 08:59:25 +04:00
execvp ( " /bin/sh " , ( char * * ) __argv ) ;
2010-11-10 16:52:32 +03:00
free ( __argv ) ;
2010-04-02 08:59:25 +04:00
exit ( - 1 ) ;
}
dup2 ( live_pipe [ 0 ] , 0 ) ;
close ( live_pipe [ 1 ] ) ;
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
__argv = malloc ( ( argc + 4 ) * sizeof ( const char * ) ) ;
2010-11-10 16:52:32 +03:00
if ( ! __argv )
die ( " malloc " ) ;
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
j = 0 ;
__argv [ j + + ] = " /bin/sh " ;
__argv [ j + + ] = rep_script_path ;
for ( i = 1 ; i < rep_args + 1 ; i + + )
__argv [ j + + ] = argv [ i ] ;
__argv [ j + + ] = " -i " ;
__argv [ j + + ] = " - " ;
__argv [ j + + ] = NULL ;
2010-04-02 08:59:25 +04:00
execvp ( " /bin/sh " , ( char * * ) __argv ) ;
2010-11-10 16:52:32 +03:00
free ( __argv ) ;
2010-04-02 08:59:25 +04:00
exit ( - 1 ) ;
}
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
if ( rec_script_path )
script_path = rec_script_path ;
if ( rep_script_path )
script_path = rep_script_path ;
perf trace record: handle commands correctly
Because the perf-trace shell scripts hard-coded the use of the
perf-record system-wide param, a perf trace record session was always
system wide, even if it was given a command.
If given a command, perf trace record now only records the events for
the command, as users expect.
If no command is given, or if the '-a' option is used, the recorded
events are system-wide, as before.
root@tropicana:~# perf trace record syscall-counts ls -al
root@tropicana:~# perf trace
ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0)
ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0)
root@tropicana:~# perf trace record syscall-counts -a ls -al
root@tropicana:~# perf trace
npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0)
ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:15:43 +03:00
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
if ( script_path ) {
system_wide = false ;
j = 0 ;
2009-12-15 11:53:39 +03:00
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
if ( rec_script_path )
system_wide = ! have_cmd ( argc - 1 , & argv [ 1 ] ) ;
perf trace record: handle commands correctly
Because the perf-trace shell scripts hard-coded the use of the
perf-record system-wide param, a perf trace record session was always
system wide, even if it was given a command.
If given a command, perf trace record now only records the events for
the command, as users expect.
If no command is given, or if the '-a' option is used, the recorded
events are system-wide, as before.
root@tropicana:~# perf trace record syscall-counts ls -al
root@tropicana:~# perf trace
ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0)
ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0)
root@tropicana:~# perf trace record syscall-counts -a ls -al
root@tropicana:~# perf trace
npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0)
ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:15:43 +03:00
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
__argv = malloc ( ( argc + 2 ) * sizeof ( const char * ) ) ;
2010-11-10 16:52:32 +03:00
if ( ! __argv )
die ( " malloc " ) ;
perf trace record: handle commands correctly
Because the perf-trace shell scripts hard-coded the use of the
perf-record system-wide param, a perf trace record session was always
system wide, even if it was given a command.
If given a command, perf trace record now only records the events for
the command, as users expect.
If no command is given, or if the '-a' option is used, the recorded
events are system-wide, as before.
root@tropicana:~# perf trace record syscall-counts ls -al
root@tropicana:~# perf trace
ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0)
ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0)
root@tropicana:~# perf trace record syscall-counts -a ls -al
root@tropicana:~# perf trace
npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0)
ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:15:43 +03:00
__argv [ j + + ] = " /bin/sh " ;
__argv [ j + + ] = script_path ;
if ( system_wide )
__argv [ j + + ] = " -a " ;
perf trace: live-mode command-line cleanup
This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.
The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.
With this patch, the following live-mode trace now works as expected:
$ perf trace rw-by-pid ls -al
The previous system-wide behavior for this command would still be
available by explicitly specifying -a:
$ perf trace rw-by-pid -a ls -al
and if no <command> is specified, the output is also system-wide:
$ perf trace rw-by-pid
Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.
For example:
$ perf trace syscall-counts ls
Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.
If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:
$ perf trace record syscall-counts
$ perf trace report syscall-counts ls
So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:
- for commands with optional args and commands with no args, no args
are sent to the report script, all are sent to the record step
- for 'top' commands i.e. that end with 'top', <commands> can't be
used - all extra args are send to the report script as params
- for commands with required args, the n required args are taken to be
the first n args after the script name and sent to the report
script, and the rest are sent to the record step
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:16:51 +03:00
for ( i = 2 ; i < argc ; i + + )
perf trace record: handle commands correctly
Because the perf-trace shell scripts hard-coded the use of the
perf-record system-wide param, a perf trace record session was always
system wide, even if it was given a command.
If given a command, perf trace record now only records the events for
the command, as users expect.
If no command is given, or if the '-a' option is used, the recorded
events are system-wide, as before.
root@tropicana:~# perf trace record syscall-counts ls -al
root@tropicana:~# perf trace
ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0)
ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0)
root@tropicana:~# perf trace record syscall-counts -a ls -al
root@tropicana:~# perf trace
npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0)
ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2010-11-10 17:15:43 +03:00
__argv [ j + + ] = argv [ i ] ;
__argv [ j + + ] = NULL ;
2009-12-15 11:53:39 +03:00
execvp ( " /bin/sh " , ( char * * ) __argv ) ;
2010-11-10 16:52:32 +03:00
free ( __argv ) ;
2009-12-15 11:53:39 +03:00
exit ( - 1 ) ;
}
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
2009-12-16 01:04:40 +03:00
if ( symbol__init ( ) < 0 )
return - 1 ;
2010-03-03 10:04:33 +03:00
if ( ! script_name )
setup_pager ( ) ;
2009-08-17 18:18:08 +04:00
2010-12-10 06:09:16 +03:00
session = perf_session__new ( input_name , O_RDONLY , 0 , false , & event_ops ) ;
2009-12-14 00:50:24 +03:00
if ( session = = NULL )
return - ENOMEM ;
2010-04-02 08:59:18 +04:00
if ( strcmp ( input_name , " - " ) & &
! perf_session__has_traces ( session , " record -R " ) )
2009-12-28 02:37:02 +03:00
return - EINVAL ;
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
if ( generate_script_lang ) {
struct stat perf_stat ;
int input = open ( input_name , O_RDONLY ) ;
if ( input < 0 ) {
perror ( " failed to open file " ) ;
exit ( - 1 ) ;
}
err = fstat ( input , & perf_stat ) ;
if ( err < 0 ) {
perror ( " failed to stat file " ) ;
exit ( - 1 ) ;
}
if ( ! perf_stat . st_size ) {
fprintf ( stderr , " zero-sized file, nothing to do! \n " ) ;
exit ( 0 ) ;
}
scripting_ops = script_spec__lookup ( generate_script_lang ) ;
if ( ! scripting_ops ) {
fprintf ( stderr , " invalid language specifier " ) ;
return - 1 ;
}
2010-11-16 20:45:39 +03:00
err = scripting_ops - > generate_script ( " perf-script " ) ;
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
goto out ;
}
if ( script_name ) {
2009-12-15 11:53:35 +03:00
err = scripting_ops - > start_script ( script_name , argc , argv ) ;
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
if ( err )
goto out ;
2010-11-16 20:45:39 +03:00
pr_debug ( " perf script started with script %s \n \n " , script_name ) ;
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
}
2010-11-16 20:45:39 +03:00
err = __cmd_script ( session ) ;
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
2009-12-14 00:50:24 +03:00
perf_session__delete ( session ) ;
perf trace: Add scripting ops
Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.
The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.
See below for details on the interface.
This patch also adds a couple command-line options to 'perf
trace':
The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:
[language spec:]scriptname[.ext]
Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages. The
specs can be used either as prefixes or extensions.
If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to. Language specs are case
insensitive.
e.g. Perl scripts can be specified in the following ways:
Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl
The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language. Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.
Adding support for a scripting language
---------------------------------------
The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:
It consists of the following four functions:
start_script()
stop_script()
process_event()
generate_script()
start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.
stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.
process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'. The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.
generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event. Again, look at the Perl
implementation for clues as to how that can be done. This is an
optional, but very useful op.
Support for a given language should also add a language-specific
setup function and call it from setup_scripting(). The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register(). When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.
In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script. The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.
There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible. One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values. See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface. Again, see the
Perl implementation for examples.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-25 10:15:46 +03:00
cleanup_scripting ( ) ;
out :
return err ;
2009-08-17 18:18:08 +04:00
}