iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
c88c094985
linux/drivers/target/iscsi/iscsi_target_erl1.h

37 lines
1.6 KiB
C
Raw Normal View History

iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 10:43:04 +04:00
#ifndef ISCSI_TARGET_ERL1_H
#define ISCSI_TARGET_ERL1_H
target: Minimize #include directives Remove superfluous #include directives from the include/target/*.h files. Add missing #include directives to other *.h and *.c files. Use forward declarations for structures where possible. This change reduces the build time for make M=drivers/target on my laptop from 27.1s to 18.7s or by about 30%. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
2016-11-15 02:47:14 +03:00
#include <linux/types.h>
#include <scsi/iscsi_proto.h> /* itt_t */
struct iscsi_cmd;
struct iscsi_conn;
struct iscsi_datain_req;
struct iscsi_ooo_cmdsn;
struct iscsi_pdu;
struct iscsi_session;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 10:43:04 +04:00
extern int iscsit_dump_data_payload(struct iscsi_conn *, u32, int);
extern int iscsit_create_recovery_datain_values_datasequenceinorder_yes(
struct iscsi_cmd *, struct iscsi_datain_req *);
extern int iscsit_create_recovery_datain_values_datasequenceinorder_no(
struct iscsi_cmd *, struct iscsi_datain_req *);
extern int iscsit_handle_recovery_datain_or_r2t(struct iscsi_conn *, unsigned char *,
iscsit: use the itt_t abstract type Use the special itt_t type defined by the iscsi headers and the initiator to make sure it's an opaque value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-26 16:00:39 +04:00
itt_t, u32, u32, u32);
extern int iscsit_handle_status_snack(struct iscsi_conn *, itt_t, u32,
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 10:43:04 +04:00
u32, u32);
extern int iscsit_handle_data_ack(struct iscsi_conn *, u32, u32, u32);
extern int iscsit_dataout_datapduinorder_no_fbit(struct iscsi_cmd *, struct iscsi_pdu *);
extern int iscsit_recover_dataout_sequence(struct iscsi_cmd *, u32, u32);
extern void iscsit_clear_ooo_cmdsns_for_conn(struct iscsi_conn *);
extern void iscsit_free_all_ooo_cmdsns(struct iscsi_session *);
extern int iscsit_execute_ooo_cmdsns(struct iscsi_session *);
extern int iscsit_execute_cmd(struct iscsi_cmd *, int);
extern int iscsit_handle_ooo_cmdsn(struct iscsi_session *, struct iscsi_cmd *, u32);
extern void iscsit_remove_ooo_cmdsn(struct iscsi_session *, struct iscsi_ooo_cmdsn *);
extern void iscsit_mod_dataout_timer(struct iscsi_cmd *);
extern void iscsit_start_dataout_timer(struct iscsi_cmd *, struct iscsi_conn *);
extern void iscsit_stop_dataout_timer(struct iscsi_cmd *);
#endif /* ISCSI_TARGET_ERL1_H */
Reference in New Issue Copy Permalink