2018-08-30 19:52:54 +03:00
// SPDX-License-Identifier: GPL-2.0
2017-06-04 15:59:20 +03:00
/*
* MFD core driver for Intel Cherrytrail Whiskey Cove PMIC
*
* Copyright ( C ) 2017 Hans de Goede < hdegoede @ redhat . com >
*
* Based on various non upstream patches to support the CHT Whiskey Cove PMIC :
* Copyright ( C ) 2013 - 2015 Intel Corporation . All rights reserved .
*/
# include <linux/acpi.h>
# include <linux/delay.h>
mfd: intel_soc_pmic_chtwc: Add cht_wc_model data to struct intel_soc_pmic
Tablet / laptop designs using an Intel Cherry Trail x86 main SoC with
an Intel Whiskey Cove PMIC do not use a single standard setup for
the charger, fuel-gauge and other chips surrounding the PMIC /
charging+data USB port.
Unlike what is normal on x86 this diversity in designs is not handled
by the ACPI tables. On 2 of the 3 known designs there are no standard
(PNP0C0A) ACPI battery devices and on the 3th design the ACPI battery
device does not work under Linux due to it requiring non-standard
and undocumented ACPI behavior.
So to make things work under Linux we use native charger and fuel-gauge
drivers on these devices, re-using the native drivers used on ARM boards
with the same charger / fuel-gauge ICs.
This requires various MFD-cell drivers for the CHT-WC PMIC cells to
know which model they are exactly running on so that they can e.g.
instantiate an I2C-client for the right model charger-IC (the charger
is connected to an I2C-controller which is part of the PMIC).
Rather then duplicating DMI-id matching to check which model we are
running on in each MFD-cell driver, add a check for this to the
shared drivers/mfd/intel_soc_pmic_chtwc.c code by using a
DMI table for all 3 known models:
1. The GPD Win and GPD Pocket mini-laptops, these are really 2 models
but the Pocket re-uses the GPD Win's design in a different housing:
The WC PMIC is connected to a TI BQ24292i charger, paired with
a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller +
a PI3USB30532 USB switch, for a fully functional Type-C port.
2. The Xiaomi Mi Pad 2:
The WC PMIC is connected to a TI BQ25890 charger, paired with
a TI BQ27520 fuelgauge, using the TI BQ25890 for BC1.2 charger type
detection, for a USB-2 only Type-C port without PD.
3. The Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 series:
The WC PMIC is connected to a TI BQ25892 charger, paired with
a TI BQ27542 fuelgauge, using the WC PMIC for BC1.2 charger type
detection and using the BQ25892's Mediatek Pump Express+ (1.0)
support to enable charging with up to 12V through a micro-USB port.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2022-02-01 16:07:00 +03:00
# include <linux/dmi.h>
2017-06-04 15:59:20 +03:00
# include <linux/err.h>
# include <linux/i2c.h>
# include <linux/interrupt.h>
# include <linux/kernel.h>
# include <linux/mfd/core.h>
# include <linux/mfd/intel_soc_pmic.h>
# include <linux/regmap.h>
/* PMIC device registers */
# define REG_OFFSET_MASK GENMASK(7, 0)
# define REG_ADDR_MASK GENMASK(15, 8)
# define REG_ADDR_SHIFT 8
# define CHT_WC_IRQLVL1 0x6e02
# define CHT_WC_IRQLVL1_MASK 0x6e0e
/* Whiskey Cove PMIC share same ACPI ID between different platforms */
# define CHT_WC_HRV 3
/* Level 1 IRQs (level 2 IRQs are handled in the child device drivers) */
enum {
CHT_WC_PWRSRC_IRQ = 0 ,
CHT_WC_THRM_IRQ ,
CHT_WC_BCU_IRQ ,
CHT_WC_ADC_IRQ ,
CHT_WC_EXT_CHGR_IRQ ,
CHT_WC_GPIO_IRQ ,
/* There is no irq 6 */
CHT_WC_CRIT_IRQ = 7 ,
} ;
2020-09-22 22:26:53 +03:00
static const struct resource cht_wc_pwrsrc_resources [ ] = {
2017-06-04 15:59:20 +03:00
DEFINE_RES_IRQ ( CHT_WC_PWRSRC_IRQ ) ,
} ;
2020-09-22 22:26:53 +03:00
static const struct resource cht_wc_ext_charger_resources [ ] = {
2017-06-04 15:59:20 +03:00
DEFINE_RES_IRQ ( CHT_WC_EXT_CHGR_IRQ ) ,
} ;
static struct mfd_cell cht_wc_dev [ ] = {
{
. name = " cht_wcove_pwrsrc " ,
. num_resources = ARRAY_SIZE ( cht_wc_pwrsrc_resources ) ,
. resources = cht_wc_pwrsrc_resources ,
} , {
. name = " cht_wcove_ext_chgr " ,
. num_resources = ARRAY_SIZE ( cht_wc_ext_charger_resources ) ,
. resources = cht_wc_ext_charger_resources ,
} ,
{ . name = " cht_wcove_region " , } ,
2019-02-12 23:59:01 +03:00
{ . name = " cht_wcove_leds " , } ,
2017-06-04 15:59:20 +03:00
} ;
/*
* The CHT Whiskey Cove covers multiple I2C addresses , with a 1 Byte
* register address space per I2C address , so we use 16 bit register
* addresses where the high 8 bits contain the I2C client address .
*/
static int cht_wc_byte_reg_read ( void * context , unsigned int reg ,
unsigned int * val )
{
struct i2c_client * client = context ;
int ret , orig_addr = client - > addr ;
if ( ! ( reg & REG_ADDR_MASK ) ) {
dev_err ( & client - > dev , " Error I2C address not specified \n " ) ;
return - EINVAL ;
}
client - > addr = ( reg & REG_ADDR_MASK ) > > REG_ADDR_SHIFT ;
ret = i2c_smbus_read_byte_data ( client , reg & REG_OFFSET_MASK ) ;
client - > addr = orig_addr ;
if ( ret < 0 )
return ret ;
* val = ret ;
return 0 ;
}
static int cht_wc_byte_reg_write ( void * context , unsigned int reg ,
unsigned int val )
{
struct i2c_client * client = context ;
int ret , orig_addr = client - > addr ;
if ( ! ( reg & REG_ADDR_MASK ) ) {
dev_err ( & client - > dev , " Error I2C address not specified \n " ) ;
return - EINVAL ;
}
client - > addr = ( reg & REG_ADDR_MASK ) > > REG_ADDR_SHIFT ;
ret = i2c_smbus_write_byte_data ( client , reg & REG_OFFSET_MASK , val ) ;
client - > addr = orig_addr ;
return ret ;
}
static const struct regmap_config cht_wc_regmap_cfg = {
. reg_bits = 16 ,
. val_bits = 8 ,
. reg_write = cht_wc_byte_reg_write ,
. reg_read = cht_wc_byte_reg_read ,
} ;
static const struct regmap_irq cht_wc_regmap_irqs [ ] = {
REGMAP_IRQ_REG ( CHT_WC_PWRSRC_IRQ , 0 , BIT ( CHT_WC_PWRSRC_IRQ ) ) ,
REGMAP_IRQ_REG ( CHT_WC_THRM_IRQ , 0 , BIT ( CHT_WC_THRM_IRQ ) ) ,
REGMAP_IRQ_REG ( CHT_WC_BCU_IRQ , 0 , BIT ( CHT_WC_BCU_IRQ ) ) ,
REGMAP_IRQ_REG ( CHT_WC_ADC_IRQ , 0 , BIT ( CHT_WC_ADC_IRQ ) ) ,
REGMAP_IRQ_REG ( CHT_WC_EXT_CHGR_IRQ , 0 , BIT ( CHT_WC_EXT_CHGR_IRQ ) ) ,
REGMAP_IRQ_REG ( CHT_WC_GPIO_IRQ , 0 , BIT ( CHT_WC_GPIO_IRQ ) ) ,
REGMAP_IRQ_REG ( CHT_WC_CRIT_IRQ , 0 , BIT ( CHT_WC_CRIT_IRQ ) ) ,
} ;
static const struct regmap_irq_chip cht_wc_regmap_irq_chip = {
. name = " cht_wc_irq_chip " ,
. status_base = CHT_WC_IRQLVL1 ,
. mask_base = CHT_WC_IRQLVL1_MASK ,
. irqs = cht_wc_regmap_irqs ,
. num_irqs = ARRAY_SIZE ( cht_wc_regmap_irqs ) ,
. num_regs = 1 ,
} ;
mfd: intel_soc_pmic_chtwc: Add cht_wc_model data to struct intel_soc_pmic
Tablet / laptop designs using an Intel Cherry Trail x86 main SoC with
an Intel Whiskey Cove PMIC do not use a single standard setup for
the charger, fuel-gauge and other chips surrounding the PMIC /
charging+data USB port.
Unlike what is normal on x86 this diversity in designs is not handled
by the ACPI tables. On 2 of the 3 known designs there are no standard
(PNP0C0A) ACPI battery devices and on the 3th design the ACPI battery
device does not work under Linux due to it requiring non-standard
and undocumented ACPI behavior.
So to make things work under Linux we use native charger and fuel-gauge
drivers on these devices, re-using the native drivers used on ARM boards
with the same charger / fuel-gauge ICs.
This requires various MFD-cell drivers for the CHT-WC PMIC cells to
know which model they are exactly running on so that they can e.g.
instantiate an I2C-client for the right model charger-IC (the charger
is connected to an I2C-controller which is part of the PMIC).
Rather then duplicating DMI-id matching to check which model we are
running on in each MFD-cell driver, add a check for this to the
shared drivers/mfd/intel_soc_pmic_chtwc.c code by using a
DMI table for all 3 known models:
1. The GPD Win and GPD Pocket mini-laptops, these are really 2 models
but the Pocket re-uses the GPD Win's design in a different housing:
The WC PMIC is connected to a TI BQ24292i charger, paired with
a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller +
a PI3USB30532 USB switch, for a fully functional Type-C port.
2. The Xiaomi Mi Pad 2:
The WC PMIC is connected to a TI BQ25890 charger, paired with
a TI BQ27520 fuelgauge, using the TI BQ25890 for BC1.2 charger type
detection, for a USB-2 only Type-C port without PD.
3. The Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 series:
The WC PMIC is connected to a TI BQ25892 charger, paired with
a TI BQ27542 fuelgauge, using the WC PMIC for BC1.2 charger type
detection and using the BQ25892's Mediatek Pump Express+ (1.0)
support to enable charging with up to 12V through a micro-USB port.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2022-02-01 16:07:00 +03:00
static const struct dmi_system_id cht_wc_model_dmi_ids [ ] = {
{
/* GPD win / GPD pocket mini laptops */
. driver_data = ( void * ) ( long ) INTEL_CHT_WC_GPD_WIN_POCKET ,
/*
* This DMI match may not seem unique , but it is . In the 67000 +
* DMI decode dumps from linux - hardware . org only 116 have
* board_vendor set to " AMI Corporation " and of those 116 only
* the GPD win ' s and pocket ' s board_name is " Default string " .
*/
. matches = {
DMI_EXACT_MATCH ( DMI_BOARD_VENDOR , " AMI Corporation " ) ,
DMI_EXACT_MATCH ( DMI_BOARD_NAME , " Default string " ) ,
DMI_EXACT_MATCH ( DMI_BOARD_SERIAL , " Default string " ) ,
DMI_EXACT_MATCH ( DMI_PRODUCT_NAME , " Default string " ) ,
} ,
} , {
/* Xiaomi Mi Pad 2 */
. driver_data = ( void * ) ( long ) INTEL_CHT_WC_XIAOMI_MIPAD2 ,
. matches = {
DMI_MATCH ( DMI_SYS_VENDOR , " Xiaomi Inc " ) ,
DMI_MATCH ( DMI_PRODUCT_NAME , " Mipad2 " ) ,
} ,
} , {
2023-03-01 12:54:02 +03:00
/* Lenovo Yoga Book X90F / X90L */
mfd: intel_soc_pmic_chtwc: Add cht_wc_model data to struct intel_soc_pmic
Tablet / laptop designs using an Intel Cherry Trail x86 main SoC with
an Intel Whiskey Cove PMIC do not use a single standard setup for
the charger, fuel-gauge and other chips surrounding the PMIC /
charging+data USB port.
Unlike what is normal on x86 this diversity in designs is not handled
by the ACPI tables. On 2 of the 3 known designs there are no standard
(PNP0C0A) ACPI battery devices and on the 3th design the ACPI battery
device does not work under Linux due to it requiring non-standard
and undocumented ACPI behavior.
So to make things work under Linux we use native charger and fuel-gauge
drivers on these devices, re-using the native drivers used on ARM boards
with the same charger / fuel-gauge ICs.
This requires various MFD-cell drivers for the CHT-WC PMIC cells to
know which model they are exactly running on so that they can e.g.
instantiate an I2C-client for the right model charger-IC (the charger
is connected to an I2C-controller which is part of the PMIC).
Rather then duplicating DMI-id matching to check which model we are
running on in each MFD-cell driver, add a check for this to the
shared drivers/mfd/intel_soc_pmic_chtwc.c code by using a
DMI table for all 3 known models:
1. The GPD Win and GPD Pocket mini-laptops, these are really 2 models
but the Pocket re-uses the GPD Win's design in a different housing:
The WC PMIC is connected to a TI BQ24292i charger, paired with
a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller +
a PI3USB30532 USB switch, for a fully functional Type-C port.
2. The Xiaomi Mi Pad 2:
The WC PMIC is connected to a TI BQ25890 charger, paired with
a TI BQ27520 fuelgauge, using the TI BQ25890 for BC1.2 charger type
detection, for a USB-2 only Type-C port without PD.
3. The Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 series:
The WC PMIC is connected to a TI BQ25892 charger, paired with
a TI BQ27542 fuelgauge, using the WC PMIC for BC1.2 charger type
detection and using the BQ25892's Mediatek Pump Express+ (1.0)
support to enable charging with up to 12V through a micro-USB port.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2022-02-01 16:07:00 +03:00
. driver_data = ( void * ) ( long ) INTEL_CHT_WC_LENOVO_YOGABOOK1 ,
. matches = {
2023-03-01 12:54:02 +03:00
DMI_EXACT_MATCH ( DMI_SYS_VENDOR , " Intel Corporation " ) ,
DMI_EXACT_MATCH ( DMI_PRODUCT_NAME , " CHERRYVIEW D1 PLATFORM " ) ,
DMI_EXACT_MATCH ( DMI_PRODUCT_VERSION , " YETI-11 " ) ,
} ,
} , {
/* Lenovo Yoga Book X91F / X91L */
. driver_data = ( void * ) ( long ) INTEL_CHT_WC_LENOVO_YOGABOOK1 ,
. matches = {
/* Non exact match to match F + L versions */
DMI_MATCH ( DMI_PRODUCT_NAME , " Lenovo YB1-X91 " ) ,
mfd: intel_soc_pmic_chtwc: Add cht_wc_model data to struct intel_soc_pmic
Tablet / laptop designs using an Intel Cherry Trail x86 main SoC with
an Intel Whiskey Cove PMIC do not use a single standard setup for
the charger, fuel-gauge and other chips surrounding the PMIC /
charging+data USB port.
Unlike what is normal on x86 this diversity in designs is not handled
by the ACPI tables. On 2 of the 3 known designs there are no standard
(PNP0C0A) ACPI battery devices and on the 3th design the ACPI battery
device does not work under Linux due to it requiring non-standard
and undocumented ACPI behavior.
So to make things work under Linux we use native charger and fuel-gauge
drivers on these devices, re-using the native drivers used on ARM boards
with the same charger / fuel-gauge ICs.
This requires various MFD-cell drivers for the CHT-WC PMIC cells to
know which model they are exactly running on so that they can e.g.
instantiate an I2C-client for the right model charger-IC (the charger
is connected to an I2C-controller which is part of the PMIC).
Rather then duplicating DMI-id matching to check which model we are
running on in each MFD-cell driver, add a check for this to the
shared drivers/mfd/intel_soc_pmic_chtwc.c code by using a
DMI table for all 3 known models:
1. The GPD Win and GPD Pocket mini-laptops, these are really 2 models
but the Pocket re-uses the GPD Win's design in a different housing:
The WC PMIC is connected to a TI BQ24292i charger, paired with
a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller +
a PI3USB30532 USB switch, for a fully functional Type-C port.
2. The Xiaomi Mi Pad 2:
The WC PMIC is connected to a TI BQ25890 charger, paired with
a TI BQ27520 fuelgauge, using the TI BQ25890 for BC1.2 charger type
detection, for a USB-2 only Type-C port without PD.
3. The Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 series:
The WC PMIC is connected to a TI BQ25892 charger, paired with
a TI BQ27542 fuelgauge, using the WC PMIC for BC1.2 charger type
detection and using the BQ25892's Mediatek Pump Express+ (1.0)
support to enable charging with up to 12V through a micro-USB port.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2022-02-01 16:07:00 +03:00
} ,
2023-01-26 18:38:21 +03:00
} , {
/* Lenovo Yoga Tab 3 Pro YT3-X90F */
. driver_data = ( void * ) ( long ) INTEL_CHT_WC_LENOVO_YT3_X90 ,
. matches = {
DMI_MATCH ( DMI_SYS_VENDOR , " Intel Corporation " ) ,
DMI_MATCH ( DMI_PRODUCT_NAME , " CHERRYVIEW D1 PLATFORM " ) ,
DMI_MATCH ( DMI_PRODUCT_VERSION , " Blade3-10A-001 " ) ,
} ,
mfd: intel_soc_pmic_chtwc: Add cht_wc_model data to struct intel_soc_pmic
Tablet / laptop designs using an Intel Cherry Trail x86 main SoC with
an Intel Whiskey Cove PMIC do not use a single standard setup for
the charger, fuel-gauge and other chips surrounding the PMIC /
charging+data USB port.
Unlike what is normal on x86 this diversity in designs is not handled
by the ACPI tables. On 2 of the 3 known designs there are no standard
(PNP0C0A) ACPI battery devices and on the 3th design the ACPI battery
device does not work under Linux due to it requiring non-standard
and undocumented ACPI behavior.
So to make things work under Linux we use native charger and fuel-gauge
drivers on these devices, re-using the native drivers used on ARM boards
with the same charger / fuel-gauge ICs.
This requires various MFD-cell drivers for the CHT-WC PMIC cells to
know which model they are exactly running on so that they can e.g.
instantiate an I2C-client for the right model charger-IC (the charger
is connected to an I2C-controller which is part of the PMIC).
Rather then duplicating DMI-id matching to check which model we are
running on in each MFD-cell driver, add a check for this to the
shared drivers/mfd/intel_soc_pmic_chtwc.c code by using a
DMI table for all 3 known models:
1. The GPD Win and GPD Pocket mini-laptops, these are really 2 models
but the Pocket re-uses the GPD Win's design in a different housing:
The WC PMIC is connected to a TI BQ24292i charger, paired with
a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller +
a PI3USB30532 USB switch, for a fully functional Type-C port.
2. The Xiaomi Mi Pad 2:
The WC PMIC is connected to a TI BQ25890 charger, paired with
a TI BQ27520 fuelgauge, using the TI BQ25890 for BC1.2 charger type
detection, for a USB-2 only Type-C port without PD.
3. The Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 series:
The WC PMIC is connected to a TI BQ25892 charger, paired with
a TI BQ27542 fuelgauge, using the WC PMIC for BC1.2 charger type
detection and using the BQ25892's Mediatek Pump Express+ (1.0)
support to enable charging with up to 12V through a micro-USB port.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2022-02-01 16:07:00 +03:00
} ,
{ }
} ;
2017-06-04 15:59:20 +03:00
static int cht_wc_probe ( struct i2c_client * client )
{
struct device * dev = & client - > dev ;
mfd: intel_soc_pmic_chtwc: Add cht_wc_model data to struct intel_soc_pmic
Tablet / laptop designs using an Intel Cherry Trail x86 main SoC with
an Intel Whiskey Cove PMIC do not use a single standard setup for
the charger, fuel-gauge and other chips surrounding the PMIC /
charging+data USB port.
Unlike what is normal on x86 this diversity in designs is not handled
by the ACPI tables. On 2 of the 3 known designs there are no standard
(PNP0C0A) ACPI battery devices and on the 3th design the ACPI battery
device does not work under Linux due to it requiring non-standard
and undocumented ACPI behavior.
So to make things work under Linux we use native charger and fuel-gauge
drivers on these devices, re-using the native drivers used on ARM boards
with the same charger / fuel-gauge ICs.
This requires various MFD-cell drivers for the CHT-WC PMIC cells to
know which model they are exactly running on so that they can e.g.
instantiate an I2C-client for the right model charger-IC (the charger
is connected to an I2C-controller which is part of the PMIC).
Rather then duplicating DMI-id matching to check which model we are
running on in each MFD-cell driver, add a check for this to the
shared drivers/mfd/intel_soc_pmic_chtwc.c code by using a
DMI table for all 3 known models:
1. The GPD Win and GPD Pocket mini-laptops, these are really 2 models
but the Pocket re-uses the GPD Win's design in a different housing:
The WC PMIC is connected to a TI BQ24292i charger, paired with
a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller +
a PI3USB30532 USB switch, for a fully functional Type-C port.
2. The Xiaomi Mi Pad 2:
The WC PMIC is connected to a TI BQ25890 charger, paired with
a TI BQ27520 fuelgauge, using the TI BQ25890 for BC1.2 charger type
detection, for a USB-2 only Type-C port without PD.
3. The Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 series:
The WC PMIC is connected to a TI BQ25892 charger, paired with
a TI BQ27542 fuelgauge, using the WC PMIC for BC1.2 charger type
detection and using the BQ25892's Mediatek Pump Express+ (1.0)
support to enable charging with up to 12V through a micro-USB port.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2022-02-01 16:07:00 +03:00
const struct dmi_system_id * id ;
2017-06-04 15:59:20 +03:00
struct intel_soc_pmic * pmic ;
acpi_status status ;
unsigned long long hrv ;
int ret ;
status = acpi_evaluate_integer ( ACPI_HANDLE ( dev ) , " _HRV " , NULL , & hrv ) ;
2022-06-16 20:10:08 +03:00
if ( ACPI_FAILURE ( status ) )
return dev_err_probe ( dev , - ENODEV , " Failed to get PMIC hardware revision \n " ) ;
if ( hrv ! = CHT_WC_HRV )
return dev_err_probe ( dev , - ENODEV , " Invalid PMIC hardware revision: %llu \n " , hrv ) ;
if ( client - > irq < 0 )
return dev_err_probe ( dev , - EINVAL , " Invalid IRQ \n " ) ;
2017-06-04 15:59:20 +03:00
pmic = devm_kzalloc ( dev , sizeof ( * pmic ) , GFP_KERNEL ) ;
if ( ! pmic )
return - ENOMEM ;
mfd: intel_soc_pmic_chtwc: Add cht_wc_model data to struct intel_soc_pmic
Tablet / laptop designs using an Intel Cherry Trail x86 main SoC with
an Intel Whiskey Cove PMIC do not use a single standard setup for
the charger, fuel-gauge and other chips surrounding the PMIC /
charging+data USB port.
Unlike what is normal on x86 this diversity in designs is not handled
by the ACPI tables. On 2 of the 3 known designs there are no standard
(PNP0C0A) ACPI battery devices and on the 3th design the ACPI battery
device does not work under Linux due to it requiring non-standard
and undocumented ACPI behavior.
So to make things work under Linux we use native charger and fuel-gauge
drivers on these devices, re-using the native drivers used on ARM boards
with the same charger / fuel-gauge ICs.
This requires various MFD-cell drivers for the CHT-WC PMIC cells to
know which model they are exactly running on so that they can e.g.
instantiate an I2C-client for the right model charger-IC (the charger
is connected to an I2C-controller which is part of the PMIC).
Rather then duplicating DMI-id matching to check which model we are
running on in each MFD-cell driver, add a check for this to the
shared drivers/mfd/intel_soc_pmic_chtwc.c code by using a
DMI table for all 3 known models:
1. The GPD Win and GPD Pocket mini-laptops, these are really 2 models
but the Pocket re-uses the GPD Win's design in a different housing:
The WC PMIC is connected to a TI BQ24292i charger, paired with
a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller +
a PI3USB30532 USB switch, for a fully functional Type-C port.
2. The Xiaomi Mi Pad 2:
The WC PMIC is connected to a TI BQ25890 charger, paired with
a TI BQ27520 fuelgauge, using the TI BQ25890 for BC1.2 charger type
detection, for a USB-2 only Type-C port without PD.
3. The Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 series:
The WC PMIC is connected to a TI BQ25892 charger, paired with
a TI BQ27542 fuelgauge, using the WC PMIC for BC1.2 charger type
detection and using the BQ25892's Mediatek Pump Express+ (1.0)
support to enable charging with up to 12V through a micro-USB port.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2022-02-01 16:07:00 +03:00
id = dmi_first_match ( cht_wc_model_dmi_ids ) ;
if ( id )
pmic - > cht_wc_model = ( long ) id - > driver_data ;
2017-06-04 15:59:20 +03:00
pmic - > irq = client - > irq ;
pmic - > dev = dev ;
i2c_set_clientdata ( client , pmic ) ;
pmic - > regmap = devm_regmap_init ( dev , NULL , client , & cht_wc_regmap_cfg ) ;
if ( IS_ERR ( pmic - > regmap ) )
return PTR_ERR ( pmic - > regmap ) ;
ret = devm_regmap_add_irq_chip ( dev , pmic - > regmap , pmic - > irq ,
IRQF_ONESHOT | IRQF_SHARED , 0 ,
& cht_wc_regmap_irq_chip ,
& pmic - > irq_chip_data ) ;
if ( ret )
return ret ;
return devm_mfd_add_devices ( dev , PLATFORM_DEVID_NONE ,
cht_wc_dev , ARRAY_SIZE ( cht_wc_dev ) , NULL , 0 ,
regmap_irq_get_domain ( pmic - > irq_chip_data ) ) ;
}
static void cht_wc_shutdown ( struct i2c_client * client )
{
struct intel_soc_pmic * pmic = i2c_get_clientdata ( client ) ;
disable_irq ( pmic - > irq ) ;
}
2022-06-16 20:10:09 +03:00
static int cht_wc_suspend ( struct device * dev )
2017-06-04 15:59:20 +03:00
{
struct intel_soc_pmic * pmic = dev_get_drvdata ( dev ) ;
disable_irq ( pmic - > irq ) ;
return 0 ;
}
2022-06-16 20:10:09 +03:00
static int cht_wc_resume ( struct device * dev )
2017-06-04 15:59:20 +03:00
{
struct intel_soc_pmic * pmic = dev_get_drvdata ( dev ) ;
enable_irq ( pmic - > irq ) ;
return 0 ;
}
2022-06-16 20:10:09 +03:00
static DEFINE_SIMPLE_DEV_PM_OPS ( cht_wc_pm_ops , cht_wc_suspend , cht_wc_resume ) ;
2017-06-04 15:59:20 +03:00
static const struct i2c_device_id cht_wc_i2c_id [ ] = {
{ }
} ;
static const struct acpi_device_id cht_wc_acpi_ids [ ] = {
{ " INT34D3 " , } ,
{ }
} ;
static struct i2c_driver cht_wc_driver = {
. driver = {
. name = " CHT Whiskey Cove PMIC " ,
2022-06-16 20:10:09 +03:00
. pm = pm_sleep_ptr ( & cht_wc_pm_ops ) ,
2017-06-04 15:59:20 +03:00
. acpi_match_table = cht_wc_acpi_ids ,
} ,
2023-05-15 21:27:52 +03:00
. probe = cht_wc_probe ,
2017-06-04 15:59:20 +03:00
. shutdown = cht_wc_shutdown ,
. id_table = cht_wc_i2c_id ,
} ;
builtin_i2c_driver ( cht_wc_driver ) ;