linux/arch/arm/kernel/smp_twd.c

163 lines
3.8 KiB
C
Raw Normal View History

/*
* linux/arch/arm/kernel/smp_twd.c
*
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/smp.h>
#include <linux/jiffies.h>
#include <linux/clockchips.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/smp_twd.h>
#include <asm/hardware/gic.h>
/* set up by the platform code */
void __iomem *twd_base;
static unsigned long twd_timer_rate;
static void twd_set_mode(enum clock_event_mode mode,
struct clock_event_device *clk)
{
unsigned long ctrl;
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
/* timer load already set up */
ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
| TWD_TIMER_CONTROL_PERIODIC;
break;
case CLOCK_EVT_MODE_ONESHOT:
/* period set, and timer enabled in 'next_event' hook */
ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
default:
ctrl = 0;
}
__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
}
static int twd_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
ctrl |= TWD_TIMER_CONTROL_ENABLE;
__raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
return 0;
}
/*
* local_timer_ack: checks for a local timer interrupt.
*
* If a local timer interrupt has occurred, acknowledge and return 1.
* Otherwise, return 0.
*/
int twd_timer_ack(void)
{
if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
return 1;
}
return 0;
}
static void __cpuinit twd_calibrate_rate(void)
{
unsigned long load, count;
u64 waitjiffies;
/*
* If this is the first time round, we need to work out how fast
* the timer ticks
*/
if (twd_timer_rate == 0) {
printk(KERN_INFO "Calibrating local timer... ");
/* Wait for a tick to start */
waitjiffies = get_jiffies_64() + 1;
while (get_jiffies_64() < waitjiffies)
udelay(10);
/* OK, now the tick has started, let's get the timer going */
waitjiffies += 5;
/* enable, no interrupt or reload */
__raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
/* maximum value */
__raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
while (get_jiffies_64() < waitjiffies)
udelay(10);
count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
(twd_timer_rate / 100000) % 100);
}
load = twd_timer_rate / HZ;
__raw_writel(load, twd_base + TWD_TIMER_LOAD);
}
/*
* Setup the local clock events for a CPU.
*/
void __cpuinit twd_timer_setup(struct clock_event_device *clk)
{
unsigned long flags;
twd_calibrate_rate();
clk->name = "local_timer";
clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_C3STOP;
clk->rating = 350;
clk->set_mode = twd_set_mode;
clk->set_next_event = twd_set_next_event;
clk->shift = 20;
clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift);
clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
/* Make sure our local interrupt controller has this enabled */
local_irq_save(flags);
irq_to_desc(clk->irq)->status |= IRQ_NOPROBE;
get_irq_chip(clk->irq)->unmask(clk->irq);
local_irq_restore(flags);
clockevents_register_device(clk);
}
ARM: Fix __cpuexit section mismatch warnings Fix: WARNING: vmlinux.o(.text+0x247c): Section mismatch in reference from the function cpu_idle() to the function .cpuexit.text:cpu_die() The function cpu_idle() references a function in an exit section. Often the function cpu_die() has valid usage outside the exit section and the fix is to remove the __cpuexit annotation of cpu_die. WARNING: vmlinux.o(.cpuexit.text+0x3c): Section mismatch in reference from the function cpu_die() to the function .cpuinit.text:secondary_start_kernel() The function __cpuexit cpu_die() references a function __cpuinit secondary_start_kernel(). This is often seen when error handling in the exit function uses functionality in the init path. The fix is often to remove the __cpuinit annotation of secondary_start_kernel() so it may be used outside an init section. Sam says: > The annotation of cpu_die() is wrong. > To be annotated __cpuexit the function shall: > - be used in exit context and only in exit context with HOTPLUG_CPU=n > - be used outside exit context with HOTPLUG_CPU=y So, this also means __cpu_disable(), __cpu_die() and twd_timer_stop() are also wrong. However, removing __cpuexit from cpu_die() creates: WARNING: vmlinux.o(.text+0x6834): Section mismatch in reference from the function cpu_die() to the function .cpuinit.text:secondary_start_kernel() The function cpu_die() references the function __cpuinit secondary_start_kernel(). This is often because cpu_die lacks a __cpuinit annotation or the annotation of secondary_start_kernel is wrong. so fix this using __ref. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-28 00:04:48 +04:00
#ifdef CONFIG_HOTPLUG_CPU
/*
* take a local timer down
*/
ARM: Fix __cpuexit section mismatch warnings Fix: WARNING: vmlinux.o(.text+0x247c): Section mismatch in reference from the function cpu_idle() to the function .cpuexit.text:cpu_die() The function cpu_idle() references a function in an exit section. Often the function cpu_die() has valid usage outside the exit section and the fix is to remove the __cpuexit annotation of cpu_die. WARNING: vmlinux.o(.cpuexit.text+0x3c): Section mismatch in reference from the function cpu_die() to the function .cpuinit.text:secondary_start_kernel() The function __cpuexit cpu_die() references a function __cpuinit secondary_start_kernel(). This is often seen when error handling in the exit function uses functionality in the init path. The fix is often to remove the __cpuinit annotation of secondary_start_kernel() so it may be used outside an init section. Sam says: > The annotation of cpu_die() is wrong. > To be annotated __cpuexit the function shall: > - be used in exit context and only in exit context with HOTPLUG_CPU=n > - be used outside exit context with HOTPLUG_CPU=y So, this also means __cpu_disable(), __cpu_die() and twd_timer_stop() are also wrong. However, removing __cpuexit from cpu_die() creates: WARNING: vmlinux.o(.text+0x6834): Section mismatch in reference from the function cpu_die() to the function .cpuinit.text:secondary_start_kernel() The function cpu_die() references the function __cpuinit secondary_start_kernel(). This is often because cpu_die lacks a __cpuinit annotation or the annotation of secondary_start_kernel is wrong. so fix this using __ref. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-28 00:04:48 +04:00
void twd_timer_stop(void)
{
__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
}
ARM: Fix __cpuexit section mismatch warnings Fix: WARNING: vmlinux.o(.text+0x247c): Section mismatch in reference from the function cpu_idle() to the function .cpuexit.text:cpu_die() The function cpu_idle() references a function in an exit section. Often the function cpu_die() has valid usage outside the exit section and the fix is to remove the __cpuexit annotation of cpu_die. WARNING: vmlinux.o(.cpuexit.text+0x3c): Section mismatch in reference from the function cpu_die() to the function .cpuinit.text:secondary_start_kernel() The function __cpuexit cpu_die() references a function __cpuinit secondary_start_kernel(). This is often seen when error handling in the exit function uses functionality in the init path. The fix is often to remove the __cpuinit annotation of secondary_start_kernel() so it may be used outside an init section. Sam says: > The annotation of cpu_die() is wrong. > To be annotated __cpuexit the function shall: > - be used in exit context and only in exit context with HOTPLUG_CPU=n > - be used outside exit context with HOTPLUG_CPU=y So, this also means __cpu_disable(), __cpu_die() and twd_timer_stop() are also wrong. However, removing __cpuexit from cpu_die() creates: WARNING: vmlinux.o(.text+0x6834): Section mismatch in reference from the function cpu_die() to the function .cpuinit.text:secondary_start_kernel() The function cpu_die() references the function __cpuinit secondary_start_kernel(). This is often because cpu_die lacks a __cpuinit annotation or the annotation of secondary_start_kernel is wrong. so fix this using __ref. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-28 00:04:48 +04:00
#endif