iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
d1db0eea85
linux/drivers/acpi/acpi_processor.c

501 lines
13 KiB
C
Raw Normal View History

ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
/*
* acpi_processor.c - ACPI processor enumeration support
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
* Copyright (C) 2004 Dominik Brodowski <linux@brodo.de>
* Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
* Copyright (C) 2013, Intel Corporation
* Rafael J. Wysocki <rafael.j.wysocki@intel.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/acpi.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <acpi/processor.h>
#include <asm/cpu.h>
#include "internal.h"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor");
ACPI / processor: Initialize per_cpu(processors, pr->id) properly Commit ac212b6 (ACPI / processor: Use common hotplug infrastructure) forgot about initializing the per-CPU 'processors' variables which lead to ACPI cpuidle failure to use C-states and caused boot slowdown on multi-CPU machines. Fix the problem by adding per_cpu(processors, pr->id) initialization to acpi_processor_add() and add make acpi_processor_remove() clean it up as appropriate. Also modify acpi_processor_stop() so that it doesn't clear per_cpu(processors, pr->id) on processor driver removal which would then cause problems to happen when the driver is loaded again. This version of the patch contains fixes from Yinghai Lu. Reported-and-tested-by: Yinghai Lu <yinghai@kernel.org> Reported-and-tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-30 23:55:46 +04:00
DEFINE_PER_CPU(struct acpi_processor *, processors);
EXPORT_PER_CPU_SYMBOL(processors);
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
/* --------------------------------------------------------------------------
Errata Handling
-------------------------------------------------------------------------- */
struct acpi_processor_errata errata __read_mostly;
EXPORT_SYMBOL_GPL(errata);
static int acpi_processor_errata_piix4(struct pci_dev *dev)
{
u8 value1 = 0;
u8 value2 = 0;
if (!dev)
return -EINVAL;
/*
* Note that 'dev' references the PIIX4 ACPI Controller.
*/
switch (dev->revision) {
case 0:
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
break;
case 1:
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n"));
break;
case 2:
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n"));
break;
case 3:
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n"));
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n"));
break;
}
switch (dev->revision) {
case 0: /* PIIX4 A-step */
case 1: /* PIIX4 B-step */
/*
* See specification changes #13 ("Manual Throttle Duty Cycle")
* and #14 ("Enabling and Disabling Manual Throttle"), plus
* erratum #5 ("STPCLK# Deassertion Time") from the January
* 2002 PIIX4 specification update. Applies to only older
* PIIX4 models.
*/
errata.piix4.throttle = 1;
case 2: /* PIIX4E */
case 3: /* PIIX4M */
/*
* See erratum #18 ("C3 Power State/BMIDE and Type-F DMA
* Livelock") from the January 2002 PIIX4 specification update.
* Applies to all PIIX4 models.
*/
/*
* BM-IDE
* ------
* Find the PIIX4 IDE Controller and get the Bus Master IDE
* Status register address. We'll use this later to read
* each IDE controller's DMA status to make sure we catch all
* DMA activity.
*/
dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB,
PCI_ANY_ID, PCI_ANY_ID, NULL);
if (dev) {
errata.piix4.bmisx = pci_resource_start(dev, 4);
pci_dev_put(dev);
}
/*
* Type-F DMA
* ----------
* Find the PIIX4 ISA Controller and read the Motherboard
* DMA controller's status to see if Type-F (Fast) DMA mode
* is enabled (bit 7) on either channel. Note that we'll
* disable C3 support if this is enabled, as some legacy
* devices won't operate well if fast DMA is disabled.
*/
dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB_0,
PCI_ANY_ID, PCI_ANY_ID, NULL);
if (dev) {
pci_read_config_byte(dev, 0x76, &value1);
pci_read_config_byte(dev, 0x77, &value2);
if ((value1 & 0x80) || (value2 & 0x80))
errata.piix4.fdma = 1;
pci_dev_put(dev);
}
break;
}
if (errata.piix4.bmisx)
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Bus master activity detection (BM-IDE) erratum enabled\n"));
if (errata.piix4.fdma)
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Type-F DMA livelock erratum (C3 disabled)\n"));
return 0;
}
ACPI / processor: remove unnecessary if (!pr) check acpi_processor_errata() is only called in acpi_processor_get_info(), and the argument 'pr' passed to acpi_processor_errata() will never be NULL, so the if (!pr) check is unnecessary and can be removed. Since the 'pr' argument is not used by acpi_processor_errata() any more, so change the argument into void too. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-02 07:57:38 +04:00
static int acpi_processor_errata(void)
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
{
int result = 0;
struct pci_dev *dev = NULL;
/*
* PIIX4
*/
dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID,
PCI_ANY_ID, NULL);
if (dev) {
result = acpi_processor_errata_piix4(dev);
pci_dev_put(dev);
}
return result;
}
/* --------------------------------------------------------------------------
Initialization
-------------------------------------------------------------------------- */
#ifdef CONFIG_ACPI_HOTPLUG_CPU
static int acpi_processor_hotadd_init(struct acpi_processor *pr)
{
unsigned long long sta;
acpi_status status;
int ret;
status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta);
if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_PRESENT))
return -ENODEV;
ACPI / processor: Acquire writer lock to update CPU maps CPU system maps are protected with reader/writer locks. The reader lock, get_online_cpus(), assures that the maps are not updated while holding the lock. The writer lock, cpu_hotplug_begin(), is used to udpate the cpu maps along with cpu_maps_update_begin(). However, the ACPI processor handler updates the cpu maps without holding the the writer lock. acpi_map_lsapic() is called from acpi_processor_hotadd_init() to update cpu_possible_mask and cpu_present_mask. acpi_unmap_lsapic() is called from acpi_processor_remove() to update cpu_possible_mask. Currently, they are either unprotected or protected with the reader lock, which is not correct. For example, the get_online_cpus() below is supposed to assure that cpu_possible_mask is not changed while the code is iterating with for_each_possible_cpu(). get_online_cpus(); for_each_possible_cpu(cpu) { : } put_online_cpus(); However, this lock has no protection with CPU hotplug since the ACPI processor handler does not use the writer lock when it updates cpu_possible_mask. The reader lock does not serialize within the readers. This patch protects them with the writer lock with cpu_hotplug_begin() along with cpu_maps_update_begin(), which must be held before calling cpu_hotplug_begin(). It also protects arch_register_cpu() / arch_unregister_cpu(), which creates / deletes a sysfs cpu device interface. For this purpose it changes cpu_hotplug_begin() and cpu_hotplug_done() to global and exports them in cpu.h. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-12 19:45:53 +04:00
cpu_maps_update_begin();
cpu_hotplug_begin();
ACPI / processor: use apic_id and remove duplicated _MAT evaluation Since APIC id is saved in processor struct, just use it and remove the duplicated _MAT evaluation. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-02 07:57:35 +04:00
ret = acpi_map_lsapic(pr->handle, pr->apic_id, &pr->id);
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
if (ret)
ACPI / processor: Acquire writer lock to update CPU maps CPU system maps are protected with reader/writer locks. The reader lock, get_online_cpus(), assures that the maps are not updated while holding the lock. The writer lock, cpu_hotplug_begin(), is used to udpate the cpu maps along with cpu_maps_update_begin(). However, the ACPI processor handler updates the cpu maps without holding the the writer lock. acpi_map_lsapic() is called from acpi_processor_hotadd_init() to update cpu_possible_mask and cpu_present_mask. acpi_unmap_lsapic() is called from acpi_processor_remove() to update cpu_possible_mask. Currently, they are either unprotected or protected with the reader lock, which is not correct. For example, the get_online_cpus() below is supposed to assure that cpu_possible_mask is not changed while the code is iterating with for_each_possible_cpu(). get_online_cpus(); for_each_possible_cpu(cpu) { : } put_online_cpus(); However, this lock has no protection with CPU hotplug since the ACPI processor handler does not use the writer lock when it updates cpu_possible_mask. The reader lock does not serialize within the readers. This patch protects them with the writer lock with cpu_hotplug_begin() along with cpu_maps_update_begin(), which must be held before calling cpu_hotplug_begin(). It also protects arch_register_cpu() / arch_unregister_cpu(), which creates / deletes a sysfs cpu device interface. For this purpose it changes cpu_hotplug_begin() and cpu_hotplug_done() to global and exports them in cpu.h. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-12 19:45:53 +04:00
goto out;
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
ret = arch_register_cpu(pr->id);
if (ret) {
acpi_unmap_lsapic(pr->id);
ACPI / processor: Acquire writer lock to update CPU maps CPU system maps are protected with reader/writer locks. The reader lock, get_online_cpus(), assures that the maps are not updated while holding the lock. The writer lock, cpu_hotplug_begin(), is used to udpate the cpu maps along with cpu_maps_update_begin(). However, the ACPI processor handler updates the cpu maps without holding the the writer lock. acpi_map_lsapic() is called from acpi_processor_hotadd_init() to update cpu_possible_mask and cpu_present_mask. acpi_unmap_lsapic() is called from acpi_processor_remove() to update cpu_possible_mask. Currently, they are either unprotected or protected with the reader lock, which is not correct. For example, the get_online_cpus() below is supposed to assure that cpu_possible_mask is not changed while the code is iterating with for_each_possible_cpu(). get_online_cpus(); for_each_possible_cpu(cpu) { : } put_online_cpus(); However, this lock has no protection with CPU hotplug since the ACPI processor handler does not use the writer lock when it updates cpu_possible_mask. The reader lock does not serialize within the readers. This patch protects them with the writer lock with cpu_hotplug_begin() along with cpu_maps_update_begin(), which must be held before calling cpu_hotplug_begin(). It also protects arch_register_cpu() / arch_unregister_cpu(), which creates / deletes a sysfs cpu device interface. For this purpose it changes cpu_hotplug_begin() and cpu_hotplug_done() to global and exports them in cpu.h. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-12 19:45:53 +04:00
goto out;
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
}
/*
* CPU got hot-added, but cpu_data is not initialized yet. Set a flag
* to delay cpu_idle/throttling initialization and do it when the CPU
* gets online for the first time.
*/
pr_info("CPU%d has been hot-added\n", pr->id);
pr->flags.need_hotplug_init = 1;
ACPI / processor: Acquire writer lock to update CPU maps CPU system maps are protected with reader/writer locks. The reader lock, get_online_cpus(), assures that the maps are not updated while holding the lock. The writer lock, cpu_hotplug_begin(), is used to udpate the cpu maps along with cpu_maps_update_begin(). However, the ACPI processor handler updates the cpu maps without holding the the writer lock. acpi_map_lsapic() is called from acpi_processor_hotadd_init() to update cpu_possible_mask and cpu_present_mask. acpi_unmap_lsapic() is called from acpi_processor_remove() to update cpu_possible_mask. Currently, they are either unprotected or protected with the reader lock, which is not correct. For example, the get_online_cpus() below is supposed to assure that cpu_possible_mask is not changed while the code is iterating with for_each_possible_cpu(). get_online_cpus(); for_each_possible_cpu(cpu) { : } put_online_cpus(); However, this lock has no protection with CPU hotplug since the ACPI processor handler does not use the writer lock when it updates cpu_possible_mask. The reader lock does not serialize within the readers. This patch protects them with the writer lock with cpu_hotplug_begin() along with cpu_maps_update_begin(), which must be held before calling cpu_hotplug_begin(). It also protects arch_register_cpu() / arch_unregister_cpu(), which creates / deletes a sysfs cpu device interface. For this purpose it changes cpu_hotplug_begin() and cpu_hotplug_done() to global and exports them in cpu.h. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-12 19:45:53 +04:00
out:
cpu_hotplug_done();
cpu_maps_update_done();
return ret;
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
}
#else
static inline int acpi_processor_hotadd_init(struct acpi_processor *pr)
{
return -ENODEV;
}
#endif /* CONFIG_ACPI_HOTPLUG_CPU */
static int acpi_processor_get_info(struct acpi_device *device)
{
union acpi_object object = { 0 };
struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
struct acpi_processor *pr = acpi_driver_data(device);
ACPI / scan: bail out early if failed to parse APIC ID for CPU Enhance ACPI CPU hotplug driver to print clear error message and bail out early if BIOS returns wrong value in ACPI MADT table or _MAT method. Otherwise it will add the CPU device even if failed to get APIC ID and fails any operations against sysfs interface: /sys/devices/system/cpu/cpux/online Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-09 12:15:19 +04:00
int apic_id, cpu_index, device_declaration = 0;
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
acpi_status status = AE_OK;
static int cpu0_initialized;
acpi_processor: convert acpi_evaluate_object() to acpi_evaluate_integer() acpi_evaluate_integer() is an ACPI API introduced to evaluate an ACPI control method that is known to have an integer return value. This API can simplify the code because the calling function does not need to use the specified acpi_buffer structure required by acpi_evaluate_object(); Convert acpi_evaluate_object() to acpi_evaluate_integer() in drivers/acpi/acpi_processor.c in this patch. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-03 04:32:09 +04:00
unsigned long long value;
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
ACPI / processor: remove unnecessary if (!pr) check acpi_processor_errata() is only called in acpi_processor_get_info(), and the argument 'pr' passed to acpi_processor_errata() will never be NULL, so the if (!pr) check is unnecessary and can be removed. Since the 'pr' argument is not used by acpi_processor_errata() any more, so change the argument into void too. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-02 07:57:38 +04:00
acpi_processor_errata();
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
/*
* Check to see if we have bus mastering arbitration control. This
* is required for proper C3 usage (to maintain cache coherency).
*/
if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) {
pr->flags.bm_control = 1;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Bus mastering arbitration control present\n"));
} else
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"No bus mastering arbitration control\n"));
if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) {
/* Declared with "Processor" statement; match ProcessorID */
status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
if (ACPI_FAILURE(status)) {
dev_err(&device->dev,
"Failed to evaluate processor object (0x%x)\n",
status);
return -ENODEV;
}
pr->acpi_id = object.processor.proc_id;
} else {
/*
* Declared with "Device" statement; match _UID.
* Note that we don't handle string _UIDs yet.
*/
status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
NULL, &value);
if (ACPI_FAILURE(status)) {
dev_err(&device->dev,
"Failed to evaluate processor _UID (0x%x)\n",
status);
return -ENODEV;
}
device_declaration = 1;
pr->acpi_id = value;
}
ACPI / scan: bail out early if failed to parse APIC ID for CPU Enhance ACPI CPU hotplug driver to print clear error message and bail out early if BIOS returns wrong value in ACPI MADT table or _MAT method. Otherwise it will add the CPU device even if failed to get APIC ID and fails any operations against sysfs interface: /sys/devices/system/cpu/cpux/online Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-09 12:15:19 +04:00
apic_id = acpi_get_apicid(pr->handle, device_declaration, pr->acpi_id);
if (apic_id < 0) {
ACPI / scan: reduce log level of "ACPI: \_PR_.CPU4: failed to get CPU APIC ID" Commit b981513f806d (ACPI / scan: bail out early if failed to parse APIC ID for CPU) emits an error message if ACPI processor driver fails to query APIC ID for the CPU. Originally it's designed to catch BIOS bugs for CPU hot-addition. But it accidently reveals another type of BIOS bug that: 1) BIOS implements ACPI objects for all possible instead of present CPUs. (It's valid to do that per ACPI specification.) 2) BIOS doesn't implement the _STA method for CPU objects. OSPM assumes that all CPU objects are present and functioning and attempts to use those CPU objects for CPU enumeration, which then triggers the error message. According to ACPI spec, BIOS should implement _STA for those absent CPUs at least. Though it's a BIOS bug in essential, there are some BIOSes in the fields which are implmented in this way. So reduce the log level from ERR to DEBUG to accommodate these existing BIOSes. Fixes: b981513f806d (ACPI / scan: bail out early if failed to parse APIC ID for CPU) Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-27 10:34:58 +04:00
acpi_handle_debug(pr->handle, "failed to get CPU APIC ID.\n");
ACPI / scan: bail out early if failed to parse APIC ID for CPU Enhance ACPI CPU hotplug driver to print clear error message and bail out early if BIOS returns wrong value in ACPI MADT table or _MAT method. Otherwise it will add the CPU device even if failed to get APIC ID and fails any operations against sysfs interface: /sys/devices/system/cpu/cpux/online Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-09 12:15:19 +04:00
return -ENODEV;
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
}
ACPI / scan: bail out early if failed to parse APIC ID for CPU Enhance ACPI CPU hotplug driver to print clear error message and bail out early if BIOS returns wrong value in ACPI MADT table or _MAT method. Otherwise it will add the CPU device even if failed to get APIC ID and fails any operations against sysfs interface: /sys/devices/system/cpu/cpux/online Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-09 12:15:19 +04:00
pr->apic_id = apic_id;
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
ACPI / scan: bail out early if failed to parse APIC ID for CPU Enhance ACPI CPU hotplug driver to print clear error message and bail out early if BIOS returns wrong value in ACPI MADT table or _MAT method. Otherwise it will add the CPU device even if failed to get APIC ID and fails any operations against sysfs interface: /sys/devices/system/cpu/cpux/online Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-09 12:15:19 +04:00
cpu_index = acpi_map_cpuid(pr->apic_id, pr->acpi_id);
if (!cpu0_initialized) {
cpu0_initialized = 1;
/* Handle UP system running SMP kernel, with no LAPIC in MADT */
if ((cpu_index == -1) && (num_online_cpus() == 1))
cpu_index = 0;
}
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
pr->id = cpu_index;
/*
* Extra Processor objects may be enumerated on MP systems with
* less than the max # of CPUs. They should be ignored _iff
* they are physically not present.
*/
if (pr->id == -1) {
int ret = acpi_processor_hotadd_init(pr);
if (ret)
return ret;
}
ACPI / scan: bail out early if failed to parse APIC ID for CPU Enhance ACPI CPU hotplug driver to print clear error message and bail out early if BIOS returns wrong value in ACPI MADT table or _MAT method. Otherwise it will add the CPU device even if failed to get APIC ID and fails any operations against sysfs interface: /sys/devices/system/cpu/cpux/online Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-09 12:15:19 +04:00
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
/*
* On some boxes several processors use the same processor bus id.
* But they are located in different scope. For example:
* \_SB.SCK0.CPU0
* \_SB.SCK1.CPU0
* Rename the processor device bus id. And the new bus id will be
* generated as the following format:
* CPU+CPU ID.
*/
sprintf(acpi_device_bid(device), "CPU%X", pr->id);
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id,
pr->acpi_id));
if (!object.processor.pblk_address)
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
else if (object.processor.pblk_length != 6)
dev_err(&device->dev, "Invalid PBLK length [%d]\n",
object.processor.pblk_length);
else {
pr->throttling.address = object.processor.pblk_address;
pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset;
pr->throttling.duty_width = acpi_gbl_FADT.duty_width;
pr->pblk = object.processor.pblk_address;
/*
* We don't care about error returns - we just try to mark
* these reserved so that nobody else is confused into thinking
* that this region might be unused..
*
* (In particular, allocating the IO range for Cardbus)
*/
request_region(pr->throttling.address, 6, "ACPI CPU throttle");
}
/*
* If ACPI describes a slot number for this CPU, we can use it to
* ensure we get the right value in the "physical id" field
* of /proc/cpuinfo
*/
acpi_processor: convert acpi_evaluate_object() to acpi_evaluate_integer() acpi_evaluate_integer() is an ACPI API introduced to evaluate an ACPI control method that is known to have an integer return value. This API can simplify the code because the calling function does not need to use the specified acpi_buffer structure required by acpi_evaluate_object(); Convert acpi_evaluate_object() to acpi_evaluate_integer() in drivers/acpi/acpi_processor.c in this patch. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-03 04:32:09 +04:00
status = acpi_evaluate_integer(pr->handle, "_SUN", NULL, &value);
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
if (ACPI_SUCCESS(status))
acpi_processor: convert acpi_evaluate_object() to acpi_evaluate_integer() acpi_evaluate_integer() is an ACPI API introduced to evaluate an ACPI control method that is known to have an integer return value. This API can simplify the code because the calling function does not need to use the specified acpi_buffer structure required by acpi_evaluate_object(); Convert acpi_evaluate_object() to acpi_evaluate_integer() in drivers/acpi/acpi_processor.c in this patch. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-03 04:32:09 +04:00
arch_fix_phys_package_id(pr->id, value);
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
return 0;
}
/*
* Do not put anything in here which needs the core to be online.
* For example MSR access or setting up things which check for cpuinfo_x86
* (cpu_data(cpu)) values, like CPU feature flags, family, model, etc.
* Such things have to be put in and set up by the processor driver's .probe().
*/
static DEFINE_PER_CPU(void *, processor_device_array);
acpi: delete __cpuinit usage from all acpi files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the drivers/acpi uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Len Brown <lenb@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: linux-acpi@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 22:30:58 +04:00
static int acpi_processor_add(struct acpi_device *device,
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
const struct acpi_device_id *id)
{
struct acpi_processor *pr;
struct device *dev;
int result = 0;
pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
if (!pr)
return -ENOMEM;
if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
result = -ENOMEM;
goto err_free_pr;
}
pr->handle = device->handle;
strcpy(acpi_device_name(device), ACPI_PROCESSOR_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
device->driver_data = pr;
result = acpi_processor_get_info(device);
if (result) /* Processor is not physically present or unavailable */
return 0;
#ifdef CONFIG_SMP
if (pr->id >= setup_max_cpus && pr->id != 0)
return 0;
#endif
BUG_ON(pr->id >= nr_cpu_ids);
/*
* Buggy BIOS check.
* ACPI id of processors can be reported wrongly by the BIOS.
* Don't trust it blindly
*/
if (per_cpu(processor_device_array, pr->id) != NULL &&
per_cpu(processor_device_array, pr->id) != device) {
dev_warn(&device->dev,
"BIOS reported wrong ACPI id %d for the processor\n",
pr->id);
/* Give up, but do not abort the namespace scan. */
goto err;
}
/*
* processor_device_array is not cleared on errors to allow buggy BIOS
* checks.
*/
per_cpu(processor_device_array, pr->id) = device;
ACPI / processor: Initialize per_cpu(processors, pr->id) properly Commit ac212b6 (ACPI / processor: Use common hotplug infrastructure) forgot about initializing the per-CPU 'processors' variables which lead to ACPI cpuidle failure to use C-states and caused boot slowdown on multi-CPU machines. Fix the problem by adding per_cpu(processors, pr->id) initialization to acpi_processor_add() and add make acpi_processor_remove() clean it up as appropriate. Also modify acpi_processor_stop() so that it doesn't clear per_cpu(processors, pr->id) on processor driver removal which would then cause problems to happen when the driver is loaded again. This version of the patch contains fixes from Yinghai Lu. Reported-and-tested-by: Yinghai Lu <yinghai@kernel.org> Reported-and-tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-30 23:55:46 +04:00
per_cpu(processors, pr->id) = pr;
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
dev = get_cpu_device(pr->id);
ACPI / processor: Fix potential NULL pointer dereference in acpi_processor_add() In acpi_processor_add(), get_cpu_device() may return NULL in some cases which is then passed to acpi_bind_one() and that will case a NULL pointer dereference to occur. Add a check to prevent that from happening. [rjw: Changelog] Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-31 07:36:08 +04:00
if (!dev) {
result = -ENODEV;
goto err;
}
ACPI / bind: Pass struct acpi_device pointer to acpi_bind_one() There is no reason to pass an ACPI handle to acpi_bind_one() instead of a struct acpi_device pointer to the target device object, so modify that function to take a struct acpi_device pointer as its second argument and update all code depending on it accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Lan Tianyu <tianyu.lan@intel.com> # for USB/ACPI
2013-11-29 19:27:43 +04:00
result = acpi_bind_one(dev, device);
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
if (result)
goto err;
pr->dev = dev;
dev->offline = pr->flags.need_hotplug_init;
/* Trigger the processor driver's .probe() if present. */
if (device_attach(dev) >= 0)
return 1;
dev_err(dev, "Processor driver could not be attached\n");
acpi_unbind_one(dev);
err:
free_cpumask_var(pr->throttling.shared_cpu_map);
device->driver_data = NULL;
ACPI / processor: Initialize per_cpu(processors, pr->id) properly Commit ac212b6 (ACPI / processor: Use common hotplug infrastructure) forgot about initializing the per-CPU 'processors' variables which lead to ACPI cpuidle failure to use C-states and caused boot slowdown on multi-CPU machines. Fix the problem by adding per_cpu(processors, pr->id) initialization to acpi_processor_add() and add make acpi_processor_remove() clean it up as appropriate. Also modify acpi_processor_stop() so that it doesn't clear per_cpu(processors, pr->id) on processor driver removal which would then cause problems to happen when the driver is loaded again. This version of the patch contains fixes from Yinghai Lu. Reported-and-tested-by: Yinghai Lu <yinghai@kernel.org> Reported-and-tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-30 23:55:46 +04:00
per_cpu(processors, pr->id) = NULL;
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
err_free_pr:
kfree(pr);
return result;
}
#ifdef CONFIG_ACPI_HOTPLUG_CPU
/* --------------------------------------------------------------------------
Removal
-------------------------------------------------------------------------- */
static void acpi_processor_remove(struct acpi_device *device)
{
struct acpi_processor *pr;
if (!device || !acpi_driver_data(device))
return;
pr = acpi_driver_data(device);
if (pr->id >= nr_cpu_ids)
goto out;
/*
* The only reason why we ever get here is CPU hot-removal. The CPU is
* already offline and the ACPI device removal locking prevents it from
* being put back online at this point.
*
* Unbind the driver from the processor device and detach it from the
* ACPI companion object.
*/
device_release_driver(pr->dev);
acpi_unbind_one(pr->dev);
/* Clean up. */
per_cpu(processor_device_array, pr->id) = NULL;
ACPI / processor: Initialize per_cpu(processors, pr->id) properly Commit ac212b6 (ACPI / processor: Use common hotplug infrastructure) forgot about initializing the per-CPU 'processors' variables which lead to ACPI cpuidle failure to use C-states and caused boot slowdown on multi-CPU machines. Fix the problem by adding per_cpu(processors, pr->id) initialization to acpi_processor_add() and add make acpi_processor_remove() clean it up as appropriate. Also modify acpi_processor_stop() so that it doesn't clear per_cpu(processors, pr->id) on processor driver removal which would then cause problems to happen when the driver is loaded again. This version of the patch contains fixes from Yinghai Lu. Reported-and-tested-by: Yinghai Lu <yinghai@kernel.org> Reported-and-tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-30 23:55:46 +04:00
per_cpu(processors, pr->id) = NULL;
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
ACPI / processor: Acquire writer lock to update CPU maps CPU system maps are protected with reader/writer locks. The reader lock, get_online_cpus(), assures that the maps are not updated while holding the lock. The writer lock, cpu_hotplug_begin(), is used to udpate the cpu maps along with cpu_maps_update_begin(). However, the ACPI processor handler updates the cpu maps without holding the the writer lock. acpi_map_lsapic() is called from acpi_processor_hotadd_init() to update cpu_possible_mask and cpu_present_mask. acpi_unmap_lsapic() is called from acpi_processor_remove() to update cpu_possible_mask. Currently, they are either unprotected or protected with the reader lock, which is not correct. For example, the get_online_cpus() below is supposed to assure that cpu_possible_mask is not changed while the code is iterating with for_each_possible_cpu(). get_online_cpus(); for_each_possible_cpu(cpu) { : } put_online_cpus(); However, this lock has no protection with CPU hotplug since the ACPI processor handler does not use the writer lock when it updates cpu_possible_mask. The reader lock does not serialize within the readers. This patch protects them with the writer lock with cpu_hotplug_begin() along with cpu_maps_update_begin(), which must be held before calling cpu_hotplug_begin(). It also protects arch_register_cpu() / arch_unregister_cpu(), which creates / deletes a sysfs cpu device interface. For this purpose it changes cpu_hotplug_begin() and cpu_hotplug_done() to global and exports them in cpu.h. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-12 19:45:53 +04:00
cpu_maps_update_begin();
cpu_hotplug_begin();
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
/* Remove the CPU. */
arch_unregister_cpu(pr->id);
acpi_unmap_lsapic(pr->id);
ACPI / processor: Acquire writer lock to update CPU maps CPU system maps are protected with reader/writer locks. The reader lock, get_online_cpus(), assures that the maps are not updated while holding the lock. The writer lock, cpu_hotplug_begin(), is used to udpate the cpu maps along with cpu_maps_update_begin(). However, the ACPI processor handler updates the cpu maps without holding the the writer lock. acpi_map_lsapic() is called from acpi_processor_hotadd_init() to update cpu_possible_mask and cpu_present_mask. acpi_unmap_lsapic() is called from acpi_processor_remove() to update cpu_possible_mask. Currently, they are either unprotected or protected with the reader lock, which is not correct. For example, the get_online_cpus() below is supposed to assure that cpu_possible_mask is not changed while the code is iterating with for_each_possible_cpu(). get_online_cpus(); for_each_possible_cpu(cpu) { : } put_online_cpus(); However, this lock has no protection with CPU hotplug since the ACPI processor handler does not use the writer lock when it updates cpu_possible_mask. The reader lock does not serialize within the readers. This patch protects them with the writer lock with cpu_hotplug_begin() along with cpu_maps_update_begin(), which must be held before calling cpu_hotplug_begin(). It also protects arch_register_cpu() / arch_unregister_cpu(), which creates / deletes a sysfs cpu device interface. For this purpose it changes cpu_hotplug_begin() and cpu_hotplug_done() to global and exports them in cpu.h. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-12 19:45:53 +04:00
cpu_hotplug_done();
cpu_maps_update_done();
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
ACPI / processor: move try_offline_node() after acpi_unmap_lsapic() try_offline_node() checks that all CPUs associated with the given node have been removed by using cpu_present_bits. If all cpus related to that node have been removed, try_offline_node() clears the node information. However, try_offline_node() called from acpi_processor_remove() never clears the node information. For disabling cpu_present_bits, acpi_unmap_lsapic() needs be called. Yet, acpi_unmap_lsapic() is called after try_offline_node() has run. So when try_offline_node() runs, the CPU's cpu_present_bits is always set. Fix the issue by moving try_offline_node() after acpi_unmap_lsapic(). The problem fixed here was uncovered by commit cecdb19 "ACPI / scan: Change the implementation of acpi_bus_trim()". [rjw: Changelog] Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: 3.9+ <stable@vger.kernel.org> # 3.9+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-06 14:11:11 +04:00
try_offline_node(cpu_to_node(pr->id));
ACPI / processor: Use common hotplug infrastructure Split the ACPI processor driver into two parts, one that is non-modular, resides in the ACPI core and handles the enumeration and hotplug of processors and one that implements the rest of the existing processor driver functionality. The non-modular part uses an ACPI scan handler object to enumerate processors on the basis of information provided by the ACPI namespace and to hook up with the common ACPI hotplug infrastructure. It also populates the ACPI handle of each processor device having a corresponding object in the ACPI namespace, which allows the driver proper to bind to those devices, and makes the driver bind to them if it is readily available (i.e. loaded) when the scan handler's .attach() routine is running. There are a few reasons to make this change. First, switching the ACPI processor driver to using the common ACPI hotplug infrastructure reduces code duplication and size considerably, even though a new file is created along with a header comment etc. Second, since the common hotplug code attempts to offline devices before starting the (non-reversible) removal procedure, it will abort (and possibly roll back) hot-remove operations involving processors if cpu_down() returns an error code for one of them instead of continuing them blindly (if /sys/firmware/acpi/hotplug/force_remove is unset). That is a more desirable behavior than what the current code does. Finally, the separation of the scan/hotplug part from the driver proper makes it possible to simplify the driver's .remove() routine, because it doesn't need to worry about the possible cleanup related to processor removal any more (the scan/hotplug part is responsible for that now) and can handle device removal and driver removal symmetricaly (i.e. as appropriate). Some user-visible changes in sysfs are made (for example, the 'sysdev' link from the ACPI device node to the processor device's directory is gone and a 'physical_node' link is present instead and a corresponding 'firmware_node' is present in the processor device's directory, the processor driver is now visible under /sys/bus/cpu/drivers/ and bound to the processor device), but that shouldn't affect the functionality that users care about (frequency scaling, C-states and thermal management). Tested on my venerable Toshiba Portege R500. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com>
2013-05-03 02:26:22 +04:00
out:
free_cpumask_var(pr->throttling.shared_cpu_map);
kfree(pr);
}
#endif /* CONFIG_ACPI_HOTPLUG_CPU */
/*
* The following ACPI IDs are known to be suitable for representing as
* processor devices.
*/
static const struct acpi_device_id processor_device_ids[] = {
{ ACPI_PROCESSOR_OBJECT_HID, },
{ ACPI_PROCESSOR_DEVICE_HID, },
{ }
};
static struct acpi_scan_handler __refdata processor_handler = {
.ids = processor_device_ids,
.attach = acpi_processor_add,
#ifdef CONFIG_ACPI_HOTPLUG_CPU
.detach = acpi_processor_remove,
#endif
.hotplug = {
.enabled = true,
},
};
void __init acpi_processor_init(void)
{
acpi_scan_add_handler_with_hotplug(&processor_handler, "processor");
}
Reference in New Issue Copy Permalink