2007-07-09 22:06:53 +01:00
if ARCH_MXC
2010-06-15 18:14:19 +02:00
source "arch/arm/plat-mxc/devices/Kconfig"
2007-07-09 22:06:53 +01:00
menu "Freescale MXC Implementations"
choice
2009-01-29 14:42:25 +01:00
prompt "Freescale CPU family:"
2011-09-27 13:48:02 +08:00
default ARCH_IMX_V6_V7
2007-07-09 22:06:53 +01:00
2011-08-23 09:39:35 +02:00
config ARCH_IMX_V4_V5
bool "i.MX1, i.MX21, i.MX25, i.MX27"
2011-11-10 16:39:31 +08:00
select AUTO_ZRELADDR if !ZBOOT_ROM
2011-08-23 09:39:35 +02:00
select ARM_PATCH_PHYS_VIRT
2009-06-04 11:32:12 +02:00
help
2011-08-23 09:39:35 +02:00
This enables support for systems based on the Freescale i.MX ARMv4
and ARMv5 SoCs
2009-06-04 11:32:12 +02:00
2011-09-27 13:48:02 +08:00
config ARCH_IMX_V6_V7
bool "i.MX3, i.MX6"
select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
2007-07-09 22:06:53 +01:00
help
2011-09-27 13:48:02 +08:00
This enables support for systems based on the Freescale i.MX3 and i.MX6
family.
2007-07-09 22:06:53 +01:00
2011-08-24 08:54:04 +02:00
config ARCH_MX5
bool "i.MX50, i.MX51, i.MX53"
2011-11-10 16:39:31 +08:00
select AUTO_ZRELADDR if !ZBOOT_ROM
2011-08-24 08:54:04 +02:00
select ARM_PATCH_PHYS_VIRT
2011-04-08 11:06:43 +02:00
help
2011-10-12 14:18:51 +02:00
This enables support for machines using Freescale's i.MX50 and i.MX53
2011-04-08 11:06:43 +02:00
processors.
2007-07-09 22:06:53 +01:00
endchoice
2010-06-10 15:11:13 +02:00
source "arch/arm/mach-imx/Kconfig"
2010-02-02 11:57:53 -08:00
source "arch/arm/mach-mx5/Kconfig"
2007-07-09 22:06:53 +01:00
endmenu
2008-09-09 11:29:41 +02:00
config MXC_IRQ_PRIOR
bool "Use IRQ priority"
help
Select this if you want to use prioritized IRQ handling.
This feature prevents higher priority ISR to be interrupted
by lower priority IRQ even IRQF_DISABLED flag is not set.
This may be useful in embedded applications, where are strong
requirements for timing.
Say N here, unless you have a specialized requirement.
2009-12-03 22:36:41 +02:00
config MXC_TZIC
2010-11-05 09:47:21 +01:00
bool
2009-12-03 22:36:41 +02:00
2010-11-05 09:37:22 +01:00
config MXC_AVIC
bool
2009-01-16 15:17:16 +01:00
config MXC_PWM
tristate "Enable PWM driver"
2009-04-14 12:50:20 +02:00
select HAVE_PWM
2009-01-16 15:17:16 +01:00
help
Enable support for the i.MX PWM controller(s).
2010-06-24 21:11:28 +08:00
config MXC_DEBUG_BOARD
bool "Enable MXC debug board(for 3-stack)"
help
The debug board is an integral part of the MXC 3-stack(PDK)
platforms, it can be attached or removed from the peripheral
board. On debug board, several debug devices(ethernet, UART,
buttons, LEDs and JTAG) are implemented. Between the MCU and
these devices, a CPLD is added as a bridge which performs
data/address de-multiplexing and decode, signal level shift,
interrupt control and various board functions.
2010-08-19 14:08:04 +02:00
config HAVE_EPIT
bool
config MXC_USE_EPIT
bool "Use EPIT instead of GPT"
depends on HAVE_EPIT
help
Use EPIT as the system timer on systems that have it. Normally you
don't have a reason to do so as the EPIT has the same features and
uses the same clocks as the GPT. Anyway, on some systems the GPT
may be in use for other purposes.
2009-11-05 09:44:09 +01:00
config MXC_ULPI
bool
2009-04-02 12:38:41 -03:00
config ARCH_HAS_RNGA
bool
2010-02-15 09:42:59 +01:00
config IMX_HAVE_IOMUX_V1
bool
2009-04-01 11:11:48 +02:00
config ARCH_MXC_IOMUX_V3
bool
2009-10-29 17:12:39 +01:00
config ARCH_MXC_AUDMUX_V1
bool
config ARCH_MXC_AUDMUX_V2
bool
2010-10-12 11:29:01 -05:00
config IRAM_ALLOC
bool
select GENERIC_ALLOCATOR
2007-07-09 22:06:53 +01:00
endif
