iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
d9a74df512
linux/drivers/usb/Kconfig

161 lines
4.4 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
# USB device configuration
#
usb: host: make USB_ARCH_HAS_?HCI obsolete The three options USB_ARCH_HAS_{EHCI,OHCI,XHCI} are all well beyond their recommended shelf life. They have caused numerous build failures over the years because they are never completely correct, and with the move to splitting out the platform specific back-ends out of the driver, there is no real need for them any more. Also, the use of making USB_ARCH_HAS_HCD depend on it is questionable since one can always enable dummy_hc these days. This patch enables them unconditionally for all platforms and architectures, which means it is now possible to build host controller drivers for machines that are known not to come with this hardware, but that is just how we treat most other drivers. In order to minimise the impact on existing architecture code and defconfig files, all the Kconfig are left present for now. All platforms that currently do 'select USB_ARCH_HAS_*' should subsequently be changed not to select that. All drivers depending on USB_ARCH_HAS_HCD should be changed to depend on USB_SUPPORT instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04 21:42:22 +04:00
# These are unused now, remove them once they are no longer selected
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
config USB_ARCH_HAS_OHCI
usb: host: make USB_ARCH_HAS_?HCI obsolete The three options USB_ARCH_HAS_{EHCI,OHCI,XHCI} are all well beyond their recommended shelf life. They have caused numerous build failures over the years because they are never completely correct, and with the move to splitting out the platform specific back-ends out of the driver, there is no real need for them any more. Also, the use of making USB_ARCH_HAS_HCD depend on it is questionable since one can always enable dummy_hc these days. This patch enables them unconditionally for all platforms and architectures, which means it is now possible to build host controller drivers for machines that are known not to come with this hardware, but that is just how we treat most other drivers. In order to minimise the impact on existing architecture code and defconfig files, all the Kconfig are left present for now. All platforms that currently do 'select USB_ARCH_HAS_*' should subsequently be changed not to select that. All drivers depending on USB_ARCH_HAS_HCD should be changed to depend on USB_SUPPORT instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04 21:42:22 +04:00
bool
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
usb: Move definition of USB_EHCI_BIG_ENDIAN_MMIO et al. out side of the ifs. When CONFIG_USB_SUPPORT is not selected we get things like: scripts/kconfig/mconf Kconfig warning: (MIPS_SEAD3 && PMC_MSP && CPU_CAVIUM_OCTEON) selects USB_EHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB) It is much cleaner to make the various system Kconfigs select USB_EHCI_BIG_ENDIAN_MMIO rather than move the system config information into USB's Kconfig, but the warnings are annoying. Eliminate the warning by moving the definition of USB_EHCI_BIG_ENDIAN_MMIO outside of all the Kconfig if statements. While we are at it move USB_OHCI_BIG_ENDIAN_DESC, USB_OHCI_BIG_ENDIAN_MMIO, USB_OHCI_LITTLE_ENDIAN and USB_EHCI_BIG_ENDIAN_DESC too, as they could very well suffer similar problems for other systems. Get rid of the redundant "default n" in USB_OHCI_BIG_ENDIAN_DESC and USB_OHCI_BIG_ENDIAN_MMIO Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-10 05:17:48 +04:00
config USB_OHCI_BIG_ENDIAN_DESC
bool
config USB_OHCI_BIG_ENDIAN_MMIO
bool
config USB_OHCI_LITTLE_ENDIAN
bool
default n if STB03xxx || PPC_MPC52xx
default y
[PATCH] USB: EHCI for AU1200 ALCHEMY: Add EHCI support for AU1200 Updated by removing the OHCI support Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-21 01:06:09 +03:00
config USB_ARCH_HAS_EHCI
usb: host: make USB_ARCH_HAS_?HCI obsolete The three options USB_ARCH_HAS_{EHCI,OHCI,XHCI} are all well beyond their recommended shelf life. They have caused numerous build failures over the years because they are never completely correct, and with the move to splitting out the platform specific back-ends out of the driver, there is no real need for them any more. Also, the use of making USB_ARCH_HAS_HCD depend on it is questionable since one can always enable dummy_hc these days. This patch enables them unconditionally for all platforms and architectures, which means it is now possible to build host controller drivers for machines that are known not to come with this hardware, but that is just how we treat most other drivers. In order to minimise the impact on existing architecture code and defconfig files, all the Kconfig are left present for now. All platforms that currently do 'select USB_ARCH_HAS_*' should subsequently be changed not to select that. All drivers depending on USB_ARCH_HAS_HCD should be changed to depend on USB_SUPPORT instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04 21:42:22 +04:00
bool
[PATCH] USB: EHCI for AU1200 ALCHEMY: Add EHCI support for AU1200 Updated by removing the OHCI support Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-21 01:06:09 +03:00
usb: Move definition of USB_EHCI_BIG_ENDIAN_MMIO et al. out side of the ifs. When CONFIG_USB_SUPPORT is not selected we get things like: scripts/kconfig/mconf Kconfig warning: (MIPS_SEAD3 && PMC_MSP && CPU_CAVIUM_OCTEON) selects USB_EHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB) It is much cleaner to make the various system Kconfigs select USB_EHCI_BIG_ENDIAN_MMIO rather than move the system config information into USB's Kconfig, but the warnings are annoying. Eliminate the warning by moving the definition of USB_EHCI_BIG_ENDIAN_MMIO outside of all the Kconfig if statements. While we are at it move USB_OHCI_BIG_ENDIAN_DESC, USB_OHCI_BIG_ENDIAN_MMIO, USB_OHCI_LITTLE_ENDIAN and USB_EHCI_BIG_ENDIAN_DESC too, as they could very well suffer similar problems for other systems. Get rid of the redundant "default n" in USB_OHCI_BIG_ENDIAN_DESC and USB_OHCI_BIG_ENDIAN_MMIO Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-10 05:17:48 +04:00
config USB_EHCI_BIG_ENDIAN_MMIO
bool
config USB_EHCI_BIG_ENDIAN_DESC
bool
usb/host: introduce USB_ARCH_HAS_XHCI to make it look like OHCI and EHCI, we introduce that symbol and USB_XHCI_HCD depend on that instead of PCI. [bigeasy@linutronix.de: wire up USB_ARCH_HAS_HCD] Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-24 01:19:56 +04:00
config USB_ARCH_HAS_XHCI
usb: host: make USB_ARCH_HAS_?HCI obsolete The three options USB_ARCH_HAS_{EHCI,OHCI,XHCI} are all well beyond their recommended shelf life. They have caused numerous build failures over the years because they are never completely correct, and with the move to splitting out the platform specific back-ends out of the driver, there is no real need for them any more. Also, the use of making USB_ARCH_HAS_HCD depend on it is questionable since one can always enable dummy_hc these days. This patch enables them unconditionally for all platforms and architectures, which means it is now possible to build host controller drivers for machines that are known not to come with this hardware, but that is just how we treat most other drivers. In order to minimise the impact on existing architecture code and defconfig files, all the Kconfig are left present for now. All platforms that currently do 'select USB_ARCH_HAS_*' should subsequently be changed not to select that. All drivers depending on USB_ARCH_HAS_HCD should be changed to depend on USB_SUPPORT instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04 21:42:22 +04:00
bool
usb/host: introduce USB_ARCH_HAS_XHCI to make it look like OHCI and EHCI, we introduce that symbol and USB_XHCI_HCD depend on that instead of PCI. [bigeasy@linutronix.de: wire up USB_ARCH_HAS_HCD] Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-24 01:19:56 +04:00
usb: Put USB Kconfig items back under USB. commit 53c6bc24fdc8db87109a5760579cbb060fa644cf (usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT.) Removed the dependency of the USB_ARCH_HAS_* symbols on USB_SUPPORT. However the resulting Kconfig somehow caused many of the USB configuration items to appear under the top level devices menu. To fix this we reunite the 'menuconfig USB_SUPPORT' with the 'if USB_SUPPORT', and the config items magically go back to their desired location. Reported-by: Julian Wollrath <jwollrath@web.de> Reported-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Reported-by: Borislav Petkov <bp@alien8.de> Reported-by: Rupesh Gujare <rgujare@ozmodevices.com> Reported-by: Feng King <ronyjin@tencent.com> Reported-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: David Daney <david.daney@cavium.com> Tested-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-23 01:01:07 +04:00
menuconfig USB_SUPPORT
bool "USB support"
depends on HAS_IOMEM
default y
---help---
This option adds core support for Universal Serial Bus (USB).
You will also need drivers from the following menu to make use of it.
usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT. The fact that an architecture/board has XHCI, OHCI or EHCI does not depend on the fact that the kernel is configured with USB_SUPPORT. Make the Kconfig reflect this fact thus avoiding ugly messages like: warning: (MIPS_ALCHEMY && CAVIUM_OCTEON_REFERENCE_BOARD && SOC_AR71XX && SOC_AR724X && SOC_AR913X && SOC_AR933X) selects USB_ARCH_HAS_EHCI which has unmet direct dependencies (USB_SUPPORT) Signed-off-by: David Daney <david.daney@cavium.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-14 02:58:05 +04:00
if USB_SUPPORT
config USB_COMMON
tristate
default y
depends on USB || USB_GADGET
config USB_ARCH_HAS_HCD
usb: host: make USB_ARCH_HAS_?HCI obsolete The three options USB_ARCH_HAS_{EHCI,OHCI,XHCI} are all well beyond their recommended shelf life. They have caused numerous build failures over the years because they are never completely correct, and with the move to splitting out the platform specific back-ends out of the driver, there is no real need for them any more. Also, the use of making USB_ARCH_HAS_HCD depend on it is questionable since one can always enable dummy_hc these days. This patch enables them unconditionally for all platforms and architectures, which means it is now possible to build host controller drivers for machines that are known not to come with this hardware, but that is just how we treat most other drivers. In order to minimise the impact on existing architecture code and defconfig files, all the Kconfig are left present for now. All platforms that currently do 'select USB_ARCH_HAS_*' should subsequently be changed not to select that. All drivers depending on USB_ARCH_HAS_HCD should be changed to depend on USB_SUPPORT instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-04 21:42:22 +04:00
def_bool y
usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT. The fact that an architecture/board has XHCI, OHCI or EHCI does not depend on the fact that the kernel is configured with USB_SUPPORT. Make the Kconfig reflect this fact thus avoiding ugly messages like: warning: (MIPS_ALCHEMY && CAVIUM_OCTEON_REFERENCE_BOARD && SOC_AR71XX && SOC_AR724X && SOC_AR913X && SOC_AR933X) selects USB_ARCH_HAS_EHCI which has unmet direct dependencies (USB_SUPPORT) Signed-off-by: David Daney <david.daney@cavium.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-14 02:58:05 +04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
config USB
tristate "Support for Host-side USB"
depends on USB_ARCH_HAS_HCD
usb: return device strings in UTF-8 Change the encoding of strings returned by usb_string() from ISO 8859-1 to UTF-8. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-24 12:12:18 +04:00
select NLS # for UTF-8 strings
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
---help---
Universal Serial Bus (USB) is a specification for a serial bus
subsystem which offers higher speeds and more features than the
traditional PC serial port. The bus supplies power to peripherals
and allows for hot swapping. Up to 127 USB peripherals can be
connected to a single USB host in a tree structure.
The USB host is the root of the tree, the peripherals are the
leaves and the inner nodes are special USB devices called hubs.
Most PCs now have USB host ports, used to connect peripherals
such as scanners, keyboards, mice, modems, cameras, disks,
flash memory, network links, and printers to the PC.
Say Y here if your computer has a host-side USB port and you want
to use USB devices. You then need to say Y to at least one of the
Host Controller Driver (HCD) options below. Choose a USB 1.1
controller, such as "UHCI HCD support" or "OHCI HCD support",
and "EHCI HCD (USB 2.0) support" except for older systems that
do not have USB 2.0 support. It doesn't normally hurt to select
them all if you are not certain.
If your system has a device-side USB port, used in the peripheral
side of the USB protocol, see the "USB Gadget" framework instead.
After choosing your HCD, then select drivers for the USB peripherals
you'll be using. You may want to check out the information provided
in <file:Documentation/usb/> and especially the links given in
<file:Documentation/usb/usb-help.txt>.
To compile this driver as a module, choose M here: the
module will be called usbcore.
USB: regroup all depends on USB within an if USB block This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09 16:29:25 +04:00
if USB
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: regroup all depends on USB within an if USB block This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09 16:29:25 +04:00
source "drivers/usb/core/Kconfig"
usb: Introduce DesignWare USB3 DRD Driver The DesignWare USB3 is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI) configurations. Several other parameters can be configured like amount of FIFO space, amount of TX and RX endpoints, amount of Host Interrupters, etc. The current driver has been validated with a virtual model of version 1.73a of that core and with an FPGA burned with version 1.83a of the DRD core. We have support for PCIe bus, which is used on FPGA prototyping, and for the OMAP5, more adaptation (or glue) layers can be easily added and the driver is half prepared to handle any possible configuration the HW engineer has chosen considering we have the information on one of the GHWPARAMS registers to do runtime checking of certain features. More runtime checks can, and should, be added in order to make this driver even more flexible with regards to number of endpoints, FIFO sizes, transfer types, etc. While this supports only the device side, for now, we will add support for Host side (xHCI - see the updated series Sebastian has sent [1]) and OTG after we have it all stabilized. [1] http://marc.info/?l=linux-usb&m=131341992020339&w=2 Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-19 19:10:58 +04:00
USB: Move usb/mon/ up to misc options in Kconfig This makes "USB Monitor" appear under "Miscellaneous USB options" section instead of in the middle of device specific drivers in the "USB Imaging devices" section. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 23:44:50 +04:00
source "drivers/usb/mon/Kconfig"
wusb: add the Wireless USB core (build-system) Add the WUSB build system (Kconfig and Kbuild) files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 19:34:26 +04:00
source "drivers/usb/wusbcore/Kconfig"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
source "drivers/usb/host/Kconfig"
usb: renesas_usbhs: Add Renesas USBHS common code Renesas SuperH has USBHS IP which can switch Host / Function. This driver is designed so that Host / Function may dynamically change. This patch add usb/renesas_usbhs and common code for SuperH USBHS. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-04 08:44:59 +04:00
source "drivers/usb/renesas_usbhs/Kconfig"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
source "drivers/usb/class/Kconfig"
source "drivers/usb/storage/Kconfig"
source "drivers/usb/image/Kconfig"
USB: regroup all depends on USB within an if USB block This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09 16:29:25 +04:00
endif
usb: musb: Rework USB and USB_GADGET dependency This USB controller can work in as host-only, gadget-only or dual-role modes. Rework the dependency on the USB and USB_GADGET configs in order to allow building the driver when !USB or !USG_GADGET. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-22 07:08:33 +04:00
source "drivers/usb/musb/Kconfig"
USB: regroup all depends on USB within an if USB block This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09 16:29:25 +04:00
source "drivers/usb/dwc3/Kconfig"
Move DWC2 driver out of staging The DWC2 driver should now be in good enough shape to move out of staging. I have stress tested it overnight on RPI running mass storage and Ethernet transfers in parallel, and for several days on our proprietary PCI-based platform. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-14 01:50:09 +04:00
source "drivers/usb/dwc2/Kconfig"
USB: regroup all depends on USB within an if USB block This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09 16:29:25 +04:00
source "drivers/usb/chipidea/Kconfig"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
comment "USB port drivers"
USB: regroup all depends on USB within an if USB block This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09 16:29:25 +04:00
if USB
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
config USB_USS720
tristate "USS720 parport driver"
USB: regroup all depends on USB within an if USB block This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09 16:29:25 +04:00
depends on PARPORT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
select PARPORT_NOT_PC
---help---
This driver is for USB parallel port adapters that use the Lucent
Technologies USS-720 chip. These cables are plugged into your USB
port and provide USB compatibility to peripherals designed with
parallel port interfaces.
The chip has two modes: automatic mode and manual mode. In automatic
mode, it looks to the computer like a standard USB printer. Only
printers may be connected to the USS-720 in this mode. The generic
USB printer driver ("USB Printer support", above) may be used in
that mode, and you can say N here if you want to use the chip only
in this mode.
Manual mode is not limited to printers, any parallel port
device should work. This driver utilizes manual mode.
Note however that some operations are three orders of magnitude
slower than on a PCI/ISA Parallel Port, so timing critical
applications might not work.
Say Y here if you own an USS-720 USB->Parport cable and intend to
connect anything other than a printer to it.
To compile this driver as a module, choose M here: the
module will be called uss720.
source "drivers/usb/serial/Kconfig"
source "drivers/usb/misc/Kconfig"
source "drivers/usb/atm/Kconfig"
USB: regroup all depends on USB within an if USB block This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09 16:29:25 +04:00
endif # USB
source "drivers/usb/phy/Kconfig"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
source "drivers/usb/gadget/Kconfig"
USB: Use menuconfig objects Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu", so that the user can disable all the options in that menu at once instead of having to disable each option separately. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-11 10:04:13 +04:00
endif # USB_SUPPORT
Reference in New Issue Copy Permalink