linux/drivers/mtd/nand/cs553x_nand.c

356 lines
9.4 KiB
C
Raw Normal View History

/*
* drivers/mtd/nand/cs553x_nand.c
*
* (C) 2005, 2006 Red Hat Inc.
*
* Author: David Woodhouse <dwmw2@infradead.org>
* Tom Sylla <tom.sylla@amd.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Overview:
* This is a device driver for the NAND flash controller found on
* the AMD CS5535/CS5536 companion chipsets for the Geode processor.
* mtd-id for command line partitioning is cs553x_nand_cs[0-3]
* where 0-3 reflects the chip select for NAND.
*
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <asm/msr.h>
#include <asm/io.h>
#define NR_CS553X_CONTROLLERS 4
#define MSR_DIVIL_GLD_CAP 0x51400000 /* DIVIL capabilitiies */
#define CAP_CS5535 0x2df000ULL
#define CAP_CS5536 0x5df500ULL
/* NAND Timing MSRs */
#define MSR_NANDF_DATA 0x5140001b /* NAND Flash Data Timing MSR */
#define MSR_NANDF_CTL 0x5140001c /* NAND Flash Control Timing */
#define MSR_NANDF_RSVD 0x5140001d /* Reserved */
/* NAND BAR MSRs */
#define MSR_DIVIL_LBAR_FLSH0 0x51400010 /* Flash Chip Select 0 */
#define MSR_DIVIL_LBAR_FLSH1 0x51400011 /* Flash Chip Select 1 */
#define MSR_DIVIL_LBAR_FLSH2 0x51400012 /* Flash Chip Select 2 */
#define MSR_DIVIL_LBAR_FLSH3 0x51400013 /* Flash Chip Select 3 */
/* Each made up of... */
#define FLSH_LBAR_EN (1ULL<<32)
#define FLSH_NOR_NAND (1ULL<<33) /* 1 for NAND */
#define FLSH_MEM_IO (1ULL<<34) /* 1 for MMIO */
/* I/O BARs have BASE_ADDR in bits 15:4, IO_MASK in 47:36 */
/* MMIO BARs have BASE_ADDR in bits 31:12, MEM_MASK in 63:44 */
/* Pin function selection MSR (IDE vs. flash on the IDE pins) */
#define MSR_DIVIL_BALL_OPTS 0x51400015
#define PIN_OPT_IDE (1<<0) /* 0 for flash, 1 for IDE */
/* Registers within the NAND flash controller BAR -- memory mapped */
#define MM_NAND_DATA 0x00 /* 0 to 0x7ff, in fact */
#define MM_NAND_CTL 0x800 /* Any even address 0x800-0x80e */
#define MM_NAND_IO 0x801 /* Any odd address 0x801-0x80f */
#define MM_NAND_STS 0x810
#define MM_NAND_ECC_LSB 0x811
#define MM_NAND_ECC_MSB 0x812
#define MM_NAND_ECC_COL 0x813
#define MM_NAND_LAC 0x814
#define MM_NAND_ECC_CTL 0x815
/* Registers within the NAND flash controller BAR -- I/O mapped */
#define IO_NAND_DATA 0x00 /* 0 to 3, in fact */
#define IO_NAND_CTL 0x04
#define IO_NAND_IO 0x05
#define IO_NAND_STS 0x06
#define IO_NAND_ECC_CTL 0x08
#define IO_NAND_ECC_LSB 0x09
#define IO_NAND_ECC_MSB 0x0a
#define IO_NAND_ECC_COL 0x0b
#define IO_NAND_LAC 0x0c
#define CS_NAND_CTL_DIST_EN (1<<4) /* Enable NAND Distract interrupt */
#define CS_NAND_CTL_RDY_INT_MASK (1<<3) /* Enable RDY/BUSY# interrupt */
#define CS_NAND_CTL_ALE (1<<2)
#define CS_NAND_CTL_CLE (1<<1)
#define CS_NAND_CTL_CE (1<<0) /* Keep low; 1 to reset */
#define CS_NAND_STS_FLASH_RDY (1<<3)
#define CS_NAND_CTLR_BUSY (1<<2)
#define CS_NAND_CMD_COMP (1<<1)
#define CS_NAND_DIST_ST (1<<0)
#define CS_NAND_ECC_PARITY (1<<2)
#define CS_NAND_ECC_CLRECC (1<<1)
#define CS_NAND_ECC_ENECC (1<<0)
static void cs553x_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
while (unlikely(len > 0x800)) {
memcpy_fromio(buf, this->IO_ADDR_R, 0x800);
buf += 0x800;
len -= 0x800;
}
memcpy_fromio(buf, this->IO_ADDR_R, len);
}
static void cs553x_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
while (unlikely(len > 0x800)) {
memcpy_toio(this->IO_ADDR_R, buf, 0x800);
buf += 0x800;
len -= 0x800;
}
memcpy_toio(this->IO_ADDR_R, buf, len);
}
static unsigned char cs553x_read_byte(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
return readb(this->IO_ADDR_R);
}
static void cs553x_write_byte(struct mtd_info *mtd, u_char byte)
{
struct nand_chip *this = mtd->priv;
int i = 100000;
while (i && readb(this->IO_ADDR_R + MM_NAND_STS) & CS_NAND_CTLR_BUSY) {
udelay(1);
i--;
}
writeb(byte, this->IO_ADDR_W + 0x801);
}
static void cs553x_hwcontrol(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
void __iomem *mmio_base = this->IO_ADDR_R;
if (ctrl & NAND_CTRL_CHANGE) {
unsigned char ctl = (ctrl & ~NAND_CTRL_CHANGE ) ^ 0x01;
writeb(ctl, mmio_base + MM_NAND_CTL);
}
if (cmd != NAND_CMD_NONE)
cs553x_write_byte(mtd, cmd);
}
static int cs553x_device_ready(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
void __iomem *mmio_base = this->IO_ADDR_R;
unsigned char foo = readb(mmio_base + MM_NAND_STS);
return (foo & CS_NAND_STS_FLASH_RDY) && !(foo & CS_NAND_CTLR_BUSY);
}
static void cs_enable_hwecc(struct mtd_info *mtd, int mode)
{
struct nand_chip *this = mtd->priv;
void __iomem *mmio_base = this->IO_ADDR_R;
writeb(0x07, mmio_base + MM_NAND_ECC_CTL);
}
static int cs_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
{
uint32_t ecc;
struct nand_chip *this = mtd->priv;
void __iomem *mmio_base = this->IO_ADDR_R;
ecc = readl(mmio_base + MM_NAND_STS);
ecc_code[1] = ecc >> 8;
ecc_code[0] = ecc >> 16;
ecc_code[2] = ecc >> 24;
return 0;
}
static struct mtd_info *cs553x_mtd[4];
static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
{
int err = 0;
struct nand_chip *this;
struct mtd_info *new_mtd;
printk(KERN_NOTICE "Probing CS553x NAND controller CS#%d at %sIO 0x%08lx\n", cs, mmio?"MM":"P", adr);
if (!mmio) {
printk(KERN_NOTICE "PIO mode not yet implemented for CS553X NAND controller\n");
return -ENXIO;
}
/* Allocate memory for MTD device structure and private data */
new_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
if (!new_mtd) {
printk(KERN_WARNING "Unable to allocate CS553X NAND MTD device structure.\n");
err = -ENOMEM;
goto out;
}
/* Get pointer to private data */
this = (struct nand_chip *)(&new_mtd[1]);
/* Link the private data with the MTD structure */
new_mtd->priv = this;
new_mtd->owner = THIS_MODULE;
/* map physical address */
this->IO_ADDR_R = this->IO_ADDR_W = ioremap(adr, 4096);
if (!this->IO_ADDR_R) {
printk(KERN_WARNING "ioremap cs553x NAND @0x%08lx failed\n", adr);
err = -EIO;
goto out_mtd;
}
this->cmd_ctrl = cs553x_hwcontrol;
this->dev_ready = cs553x_device_ready;
this->read_byte = cs553x_read_byte;
this->read_buf = cs553x_read_buf;
this->write_buf = cs553x_write_buf;
this->chip_delay = 0;
this->ecc.mode = NAND_ECC_HW;
this->ecc.size = 256;
this->ecc.bytes = 3;
this->ecc.hwctl = cs_enable_hwecc;
this->ecc.calculate = cs_calculate_ecc;
this->ecc.correct = nand_correct_data;
mtd cs553x_nand: Initialise ecc.strength before nand_scan() Loading cs553x_nand with Hynix H27U1G8F2BTR NAND flash causes this bug: kernel BUG at drivers/mtd/nand/nand_base.c:3345! invalid opcode: 0000 [#1] Modules linked in: cs553x_nand(+) vfat fat usb_storage ehci_hcd usbcore usb_comr Pid: 436, comm: modprobe Not tainted 3.6.7 #1 EIP: 0060:[<c118d205>] EFLAGS: 00010296 CPU: 0 EIP is at nand_scan_tail+0x64c/0x69c EAX: 00000034 EBX: cea6ed98 ECX: 00000000 EDX: 00000000 ESI: cea6ec00 EDI: cea6ec00 EBP: 20000000 ESP: cdd17e48 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 CR0: 8005003b CR2: 0804e119 CR3: 0d850000 CR4: 00000090 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process modprobe (pid: 436, ti=cdd16000 task=cdd1c320 task.ti=cdd16000) Stack: c12e962c c118f7ef 00000003 cea6ed98 d014b25c 20000000 fffff007 00000001 00000000 cdd53b00 d014b000 c1001021 cdd53b00 d01493c0 cdd53b00 cdd53b00 d01493c0 c1047f83 d014b4a0 00000000 cdd17f9c ce4be454 cdd17f48 cdd1c320 Call Trace: [<c118f7ef>] ? nand_scan+0x1b/0x4d [<d014b25c>] ? init_module+0x25c/0x2de [cs553x_nand] [<d014b000>] ? 0xd014afff [<c1001021>] ? do_one_initcall+0x21/0x111 [<c1047f83>] ? sys_init_module+0xe4/0x1261 [<c1031207>] ? task_work_run+0x36/0x43 [<c1265ced>] ? syscall_call+0x7/0xb Code: fa ff ff c7 86 d8 00 00 00 01 00 00 00 e9 5f fc ff ff 68 f8 26 2e c1 e8 a7 EIP: [<c118d205>] nand_scan_tail+0x64c/0x69c SS:ESP 0068:cdd17e48 Initialising ecc.strength before the call to nand_scan() fixes this. Signed-off-by: Nathan Williams <nathan@traverse.com.au> Cc: stable@vger.kernel.org [3.4+] Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-22 03:42:52 +04:00
this->ecc.strength = 1;
/* Enable the following for a flash based bad block table */
this->bbt_options = NAND_BBT_USE_FLASH;
/* Scan to find existence of the device */
if (nand_scan(new_mtd, 1)) {
err = -ENXIO;
goto out_ior;
}
new_mtd->name = kasprintf(GFP_KERNEL, "cs553x_nand_cs%d", cs);
cs553x_mtd[cs] = new_mtd;
goto out;
out_ior:
iounmap(this->IO_ADDR_R);
out_mtd:
kfree(new_mtd);
out:
return err;
}
static int is_geode(void)
{
/* These are the CPUs which will have a CS553[56] companion chip */
if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
boot_cpu_data.x86 == 5 &&
boot_cpu_data.x86_model == 10)
return 1; /* Geode LX */
if ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC ||
boot_cpu_data.x86_vendor == X86_VENDOR_CYRIX) &&
boot_cpu_data.x86 == 5 &&
boot_cpu_data.x86_model == 5)
return 1; /* Geode GX (née GX2) */
return 0;
}
static int __init cs553x_init(void)
{
int err = -ENXIO;
int i;
uint64_t val;
/* If the CPU isn't a Geode GX or LX, abort */
if (!is_geode())
return -ENXIO;
/* If it doesn't have the CS553[56], abort */
rdmsrl(MSR_DIVIL_GLD_CAP, val);
val &= ~0xFFULL;
if (val != CAP_CS5535 && val != CAP_CS5536)
return -ENXIO;
/* If it doesn't have the NAND controller enabled, abort */
rdmsrl(MSR_DIVIL_BALL_OPTS, val);
if (val & PIN_OPT_IDE) {
printk(KERN_INFO "CS553x NAND controller: Flash I/O not enabled in MSR_DIVIL_BALL_OPTS.\n");
return -ENXIO;
}
for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
rdmsrl(MSR_DIVIL_LBAR_FLSH0 + i, val);
if ((val & (FLSH_LBAR_EN|FLSH_NOR_NAND)) == (FLSH_LBAR_EN|FLSH_NOR_NAND))
err = cs553x_init_one(i, !!(val & FLSH_MEM_IO), val & 0xFFFFFFFF);
}
/* Register all devices together here. This means we can easily hack it to
do mtdconcat etc. if we want to. */
for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
if (cs553x_mtd[i]) {
/* If any devices registered, return success. Else the last error. */
mtd_device_parse_register(cs553x_mtd[i], NULL, NULL,
NULL, 0);
err = 0;
}
}
return err;
}
module_init(cs553x_init);
static void __exit cs553x_cleanup(void)
{
int i;
for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
struct mtd_info *mtd = cs553x_mtd[i];
struct nand_chip *this;
void __iomem *mmio_base;
if (!mtd)
continue;
this = cs553x_mtd[i]->priv;
mmio_base = this->IO_ADDR_R;
/* Release resources, unregister device */
nand_release(cs553x_mtd[i]);
kfree(cs553x_mtd[i]->name);
cs553x_mtd[i] = NULL;
/* unmap physical address */
iounmap(mmio_base);
/* Free the MTD device structure */
kfree(mtd);
}
}
module_exit(cs553x_cleanup);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
MODULE_DESCRIPTION("NAND controller driver for AMD CS5535/CS5536 companion chip");