linux/arch/riscv/mm/Makefile

# SPDX-License-Identifier: GPL-2.0-only

CFLAGS_init.o := -mcmodel=medany
ifdef CONFIG_FTRACE
CFLAGS_REMOVE_init.o = -pg
endif

obj-y += init.o
obj-y += extable.o
obj-$(CONFIG_MMU) += fault.o
obj-y += cacheflush.o
obj-y += context.o

ifeq ($(CONFIG_MMU),y)
obj-$(CONFIG_SMP) += tlbflush.o
endif
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_KASAN)   += kasan_init.o

ifdef CONFIG_KASAN
KASAN_SANITIZE_kasan_init.o := n
KASAN_SANITIZE_init.o := n
endif

obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o
treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2019-05-19 13:07:45 +01:00			`# SPDX-License-Identifier: GPL-2.0-only`
RISC-V: Always compile mm/init.c with cmodel=medany and notrace The Linux RISC-V 32bit kernel is broken after we moved setup_vm() from kernel/setup.c to mm/init.c because Linux RISC-V 32bit kernel by default uses cmodel=medlow which results in a non-position-independent setup_vm(). This patch fixes Linux RISC-V 32bit kernel booting by: 1. Forcing cmodel=medany for mm/init.c 2. Moving remaing MM-related stuff va_pa_offset, pfn_base and empty_zero_page from kernel/setup.c to mm/init.c Further, the setup_vm() cannot handle GCC instrumentation for FTRACE so we disable it for mm/init.c by not using "-pg" compiler flag. Fixes: 6f1e9e946f0b ("RISC-V: Move setup_vm() to mm/init.c") Suggested-by: Christoph Hellwig <hch@lst.de> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 2019-03-26 08:03:47 +00:00
			`CFLAGS_init.o := -mcmodel=medany`
			`ifdef CONFIG_FTRACE`
			`CFLAGS_REMOVE_init.o = -pg`
			`endif`

RISC-V: Build Infrastructure This patch contains all the build infrastructure that actually enables the RISC-V port. This includes Makefiles, linker scripts, and Kconfig files. It also contains the only top-level change, which adds RISC-V to the list of architectures that need a sed run to produce the ARCH variable when building locally. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> 2017-07-10 18:08:08 -07:00			`obj-y += init.o`
			`obj-y += extable.o`
generic ioremap support - clean up various obsolete ioremap and iounmap variants - add a new generic ioremap implementation and switch csky, nds32 and riscv over to it -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl3cKcsLHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYO1CRAAwFQigsbi0CqqshPWnP0owKV+HA4Xfz/lQZsd7SM/ BVXhKyDJQum6gp73dW025HCfjidTknsbdCUIP/LNUgAnop3lOlnB31/munDnJJ1H 6hB1pc+zB9VgbOe0A6TxtxPRm5aE33k1hZIZS99lOh7mY3FvF7mbkkbVoCjdS3Cq a9bTX+X+esfUQ5GgaIc2zmz2GLkyFXIeVGs8/CoOX58ESCWQcVZrsQRompo4SgrI jqwf47NzdmK8hW4mZ+jdQUiWiAmNs5+2om7Bvi/deFAIFUo1/hLHvQzqEGramq/j 5SPHax2gWAN3uWYP91QISkUAJWFydwgmUDoTO1M04ov4xLuBrqIQmc43tLjHo2UT RwMozWJWN+gkB9zTIboqMPi2qcuDaWcCij7LwHl5zLxPTcOKsrALarL55BQ8MipQ x6fpvskrQQvlArNTsRWFRUq0mCtkzE3wMZ9RR3AIETQL2hlAzB1S4gzhD+Z6WTYY pXNgkunonVGxwyN/7iJTEl/mvF/+MynGcWqhrwHZLqncyhn/WJJ2USH3nAD1+yjp v8v6UUeMXIjUsGAyfTjXy/WXAfwRuSC038AAFcmWKDdh08h4XvPHRficT4U8wr34 7WzGizHP9f1CqrhYL/4exhPY9X2Yb7HhsFd0bZGG0rRvSillPUp0b8s++m12QuQU +VY= =ooiA -----END PGP SIGNATURE----- Merge tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap Pull generic ioremap support from Christoph Hellwig: "This adds the remaining bits for an entirely generic ioremap and iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant mess of weird ioremap variants we had with no users outside the arch code. For now just the three newest ports use the code, but there is more than a handful others that can be converted without too much work. Summary: - clean up various obsolete ioremap and iounmap variants - add a new generic ioremap implementation and switch csky, nds32 and riscv over to it" * tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits) nds32: use generic ioremap csky: use generic ioremap csky: remove ioremap_cache riscv: use the generic ioremap code lib: provide a simple generic ioremap implementation sh: remove __iounmap nios2: remove __iounmap hexagon: remove __iounmap m68k: rename __iounmap and mark it static arch: rely on asm-generic/io.h for default ioremap_* definitions asm-generic: don't provide ioremap for CONFIG_MMU asm-generic: ioremap_uc should behave the same with and without MMU xtensa: clean up ioremap x86: Clean up ioremap() parisc: remove __ioremap nios2: remove __ioremap alpha: remove the unused __ioremap wrapper hexagon: clean up ioremap ia64: rename ioremap_nocache to ioremap_uc unicore32: remove ioremap_cached ... 2019-11-28 10:57:12 -08:00			`obj-$(CONFIG_MMU) += fault.o`
RISC-V: Flush I$ when making a dirty page executable The RISC-V ISA allows for instruction caches that are not coherent WRT stores, even on a single hart. As a result, we need to explicitly flush the instruction cache whenever marking a dirty page as executable in order to preserve the correct system behavior. Local instruction caches aren't that scary (our implementations actually flush the cache, but RISC-V is defined to allow higher-performance implementations to exist), but RISC-V defines no way to perform an instruction cache shootdown. When explicitly asked to do so we can shoot down remote instruction caches via an IPI, but this is a bit on the slow side. Instead of requiring an IPI to all harts whenever marking a page as executable, we simply flush the currently running harts. In order to maintain correct behavior, we additionally mark every other hart as needing a deferred instruction cache which will be taken before anything runs on it. Signed-off-by: Andrew Waterman <andrew@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 2017-10-25 14:30:32 -07:00			`obj-y += cacheflush.o`
riscv: move switch_mm to its own file switch_mm is an expensive operations that has two users. flush_icache_deferred is only called within switch_mm and can be moved together. The function is expected to be more complicated when ASID support is added, so clean up eagerly. By moving them to a separate file we also removes some excessive dependency of tlbflush.h and cacheflush.h. Signed-off-by: Gary Guo <gary@garyguo.net> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> 2019-03-27 00:41:29 +00:00			`obj-y += context.o`
riscv: Introduce huge page support for 32/64bit kernel This patch implements both 4MB huge page support for 32bit kernel and 2MB/1GB huge pages support for 64bit kernel. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> 2019-05-26 08:50:38 -04:00
riscv: move the TLB flush logic out of line The TLB flush logic is going to become more complex. Start moving it out of line. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Atish Patra <atish.patra@wdc.com> [paul.walmsley@sifive.com: fixed checkpatch whitespace warnings] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> 2019-08-21 23:58:37 +09:00			`ifeq ($(CONFIG_MMU),y)`
			`obj-$(CONFIG_SMP) += tlbflush.o`
			`endif`
riscv: Introduce huge page support for 32/64bit kernel This patch implements both 4MB huge page support for 32bit kernel and 2MB/1GB huge pages support for 64bit kernel. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> 2019-05-26 08:50:38 -04:00			`obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o`
riscv: Add KASAN support This patch ports the feature Kernel Address SANitizer (KASAN). Note: The start address of shadow memory is at the beginning of kernel space, which is 2^64 - (2^39 / 2) in SV39. The size of the kernel space is 2^38 bytes so the size of shadow memory should be 2^38 / 8. Thus, the shadow memory would not overlap with the fixmap area. There are currently two limitations in this port, 1. RV64 only: KASAN need large address space for extra shadow memory region. 2. KASAN can't debug the modules since the modules are allocated in VMALLOC area. We mapped the shadow memory, which corresponding to VMALLOC area, to the kasan_early_shadow_page because we don't have enough physical space for all the shadow memory corresponding to VMALLOC area. Signed-off-by: Nick Hu <nickhu@andestech.com> Reported-by: Greentime Hu <green.hu@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> 2020-01-06 10:38:32 -08:00			`obj-$(CONFIG_KASAN) += kasan_init.o`

			`ifdef CONFIG_KASAN`
			`KASAN_SANITIZE_kasan_init.o := n`
			`KASAN_SANITIZE_init.o := n`
			`endif`
riscv: mm: add support for CONFIG_DEBUG_VIRTUAL This patch implements CONFIG_DEBUG_VIRTUAL to do additional checks on virt_to_phys and __pa_symbol calls. virt_to_phys used for linear mapping check, and __pa_symbol used for kernel symbol check. In current RISC-V, kernel image maps to linear mapping area. If CONFIG_DEBUG_VIRTUAL is disable, these two functions calculate the offset on the address feded directly without any checks. The result of test_debug_virtual as follows: [ 0.358456] ------------[ cut here ]------------ [ 0.358738] virt_to_phys used for non-linear address: (____ptrval____) (0xffffffd000000000) [ 0.359174] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:16 __virt_to_phys+0x3c/0x50 [ 0.359409] Modules linked in: [ 0.359630] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc3-00002-g5133c5c0ca13 #57 [ 0.359861] epc: ffffffe000253d1a ra : ffffffe000253d1a sp : ffffffe03aa87da0 [ 0.360019] gp : ffffffe000ae03b0 tp : ffffffe03aa88000 t0 : ffffffe000af2660 [ 0.360175] t1 : 0000000000000064 t2 : 00000000000000b7 s0 : ffffffe03aa87dc0 [ 0.360330] s1 : ffffffd000000000 a0 : 000000000000004f a1 : 0000000000000000 [ 0.360492] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ffffffe000a84358 [ 0.360672] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 0.360876] s2 : ffffffe000ae0600 s3 : ffffffe00000fc7c s4 : ffffffe0000224b0 [ 0.361067] s5 : ffffffe000030890 s6 : ffffffe000022470 s7 : 0000000000000008 [ 0.361267] s8 : ffffffe0000002c4 s9 : ffffffe000ae0640 s10: ffffffe000ae0630 [ 0.361453] s11: 0000000000000000 t3 : 0000000000000000 t4 : 000000000001e6d0 [ 0.361636] t5 : ffffffe000ae0a18 t6 : ffffffe000aee54e [ 0.361806] status: 0000000000000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.362056] ---[ end trace aec0bf78d4978122 ]--- [ 0.362404] PA: 0xfffffff080200000 for VA: 0xffffffd000000000 [ 0.362607] PA: 0x00000000baddd2d0 for VA: 0xffffffe03abdd2d0 Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com> Tested-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> 2020-01-02 11:12:39 +08:00
			`obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o`