iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
e1bd99d07e
linux/net/bridge/br_private_mrp.h

134 lines
4.0 KiB
C
Raw Normal View History

bridge: mrp: Add MRP interface. Define the MRP interface. This interface is used by the netlink to update the MRP instances and by the MRP to make the calls to switchdev to offload it to HW. It defines an MRP instance 'struct br_mrp' which is a list of MRP instances. Which will be part of the 'struct net_bridge'. Each instance has 2 ring ports, a bridge and an ID. In case the HW can't generate MRP Test frames then the SW will generate those. br_mrp_add - adds a new MRP instance. br_mrp_del - deletes an existing MRP instance. Each instance has an ID(ring_id). br_mrp_set_port_state - changes the port state. The port can be in forwarding state, which means that the frames can pass through or in blocked state which means that the frames can't pass through except MRP frames. This will eventually call the switchdev API to notify the HW. This information is used also by the SW bridge to know how to forward frames in case the HW doesn't have this capability. br_mrp_set_port_role - a port role can be primary or secondary. This information is required to be pushed to HW in case the HW can generate MRP_Test frames. Because the MRP_Test frames contains a file with this information. Otherwise the HW will not be able to generate the frames correctly. br_mrp_set_ring_state - a ring can be in state open or closed. State open means that the mrp port stopped receiving MRP_Test frames, while closed means that the mrp port received MRP_Test frames. Similar with br_mrp_port_role, this information is pushed in HW because the MRP_Test frames contain this information. br_mrp_set_ring_role - a ring can have the following roles MRM or MRC. For the role MRM it is expected that the HW can terminate the MRP frames, notify the SW that it stopped receiving MRP_Test frames and trapp all the other MRP frames. While for MRC mode it is expected that the HW can forward the MRP frames only between the MRP ports and copy MRP_Topology frames to CPU. In case the HW doesn't support a role it needs to return an error code different than -EOPNOTSUPP. br_mrp_start_test - this starts/stops the generation of MRP_Test frames. To stop the generation of frames the interval needs to have a value of 0. In this case the userspace needs to know if the HW supports this or not. Not to have duplicate frames(generated by HW and SW). Because if the HW supports this then the SW will not generate anymore frames and will expect that the HW will notify when it stopped receiving MRP frames using the function br_mrp_port_open. br_mrp_port_open - this function is used by drivers to notify the userspace via a netlink callback that one of the ports stopped receiving MRP_Test frames. This function is called only when the node has the role MRM. It is not supposed to be called from userspace. br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add, and will notify the HW that a MRP instance is added. The function gets as parameter the MRP instance. br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del, and will notify the HW that a MRP instance is removed. The function gets as parameter the ID of the MRP instance that is removed. br_mrp_port_switchdev_set_state - this corresponds to the function br_mrp_set_port_state. It would notify the HW if it should block or not non-MRP frames. br_mrp_port_switchdev_set_port - this corresponds to the function br_mrp_set_port_role. It would set the port role, primary or secondary. br_mrp_switchdev_set_role - this corresponds to the function br_mrp_set_ring_role and would set one of the role MRM or MRC. br_mrp_switchdev_set_ring_state - this corresponds to the function br_mrp_set_ring_state and would set the ring to be open or closed. br_mrp_switchdev_send_ring_test - this corresponds to the function br_mrp_start_test. This will notify the HW to start or stop generating MRP_Test frames. Value 0 for the interval parameter means to stop generating the frames. br_mrp_port_open - this function is used to notify the userspace that the port lost the continuity of MRP Test frames. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-26 16:22:02 +03:00
/* SPDX-License-Identifier: GPL-2.0-or-later */
#ifndef _BR_PRIVATE_MRP_H_
#define _BR_PRIVATE_MRP_H_
#include "br_private.h"
#include <uapi/linux/mrp_bridge.h>
struct br_mrp {
/* list of mrp instances */
bridge: mrp: Use hlist_head instead of list_head for mrp Replace list_head with hlist_head for MRP list under the bridge. There is no need for a circular list when a linear list will work. This will also decrease the size of 'struct net_bridge'. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20201106215049.1448185-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07 00:50:49 +03:00
struct hlist_node list;
bridge: mrp: Add MRP interface. Define the MRP interface. This interface is used by the netlink to update the MRP instances and by the MRP to make the calls to switchdev to offload it to HW. It defines an MRP instance 'struct br_mrp' which is a list of MRP instances. Which will be part of the 'struct net_bridge'. Each instance has 2 ring ports, a bridge and an ID. In case the HW can't generate MRP Test frames then the SW will generate those. br_mrp_add - adds a new MRP instance. br_mrp_del - deletes an existing MRP instance. Each instance has an ID(ring_id). br_mrp_set_port_state - changes the port state. The port can be in forwarding state, which means that the frames can pass through or in blocked state which means that the frames can't pass through except MRP frames. This will eventually call the switchdev API to notify the HW. This information is used also by the SW bridge to know how to forward frames in case the HW doesn't have this capability. br_mrp_set_port_role - a port role can be primary or secondary. This information is required to be pushed to HW in case the HW can generate MRP_Test frames. Because the MRP_Test frames contains a file with this information. Otherwise the HW will not be able to generate the frames correctly. br_mrp_set_ring_state - a ring can be in state open or closed. State open means that the mrp port stopped receiving MRP_Test frames, while closed means that the mrp port received MRP_Test frames. Similar with br_mrp_port_role, this information is pushed in HW because the MRP_Test frames contain this information. br_mrp_set_ring_role - a ring can have the following roles MRM or MRC. For the role MRM it is expected that the HW can terminate the MRP frames, notify the SW that it stopped receiving MRP_Test frames and trapp all the other MRP frames. While for MRC mode it is expected that the HW can forward the MRP frames only between the MRP ports and copy MRP_Topology frames to CPU. In case the HW doesn't support a role it needs to return an error code different than -EOPNOTSUPP. br_mrp_start_test - this starts/stops the generation of MRP_Test frames. To stop the generation of frames the interval needs to have a value of 0. In this case the userspace needs to know if the HW supports this or not. Not to have duplicate frames(generated by HW and SW). Because if the HW supports this then the SW will not generate anymore frames and will expect that the HW will notify when it stopped receiving MRP frames using the function br_mrp_port_open. br_mrp_port_open - this function is used by drivers to notify the userspace via a netlink callback that one of the ports stopped receiving MRP_Test frames. This function is called only when the node has the role MRM. It is not supposed to be called from userspace. br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add, and will notify the HW that a MRP instance is added. The function gets as parameter the MRP instance. br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del, and will notify the HW that a MRP instance is removed. The function gets as parameter the ID of the MRP instance that is removed. br_mrp_port_switchdev_set_state - this corresponds to the function br_mrp_set_port_state. It would notify the HW if it should block or not non-MRP frames. br_mrp_port_switchdev_set_port - this corresponds to the function br_mrp_set_port_role. It would set the port role, primary or secondary. br_mrp_switchdev_set_role - this corresponds to the function br_mrp_set_ring_role and would set one of the role MRM or MRC. br_mrp_switchdev_set_ring_state - this corresponds to the function br_mrp_set_ring_state and would set the ring to be open or closed. br_mrp_switchdev_send_ring_test - this corresponds to the function br_mrp_start_test. This will notify the HW to start or stop generating MRP_Test frames. Value 0 for the interval parameter means to stop generating the frames. br_mrp_port_open - this function is used to notify the userspace that the port lost the continuity of MRP Test frames. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-26 16:22:02 +03:00
struct net_bridge_port __rcu *p_port;
struct net_bridge_port __rcu *s_port;
bridge: mrp: Extend br_mrp for MRP interconnect This patch extends the 'struct br_mrp' to contain information regarding the MRP interconnect. It contains the following: - the interconnect port 'i_port', which is NULL if the node doesn't have a interconnect role - the interconnect id, which is similar with the ring id, but this field is also part of the MRP_InTest frames. - the interconnect role, which can be MIM or MIC. - the interconnect state, which can be open or closed. - the interconnect delayed_work for sending MRP_InTest frames and check for lost of continuity. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 10:34:50 +03:00
struct net_bridge_port __rcu *i_port;
bridge: mrp: Add MRP interface. Define the MRP interface. This interface is used by the netlink to update the MRP instances and by the MRP to make the calls to switchdev to offload it to HW. It defines an MRP instance 'struct br_mrp' which is a list of MRP instances. Which will be part of the 'struct net_bridge'. Each instance has 2 ring ports, a bridge and an ID. In case the HW can't generate MRP Test frames then the SW will generate those. br_mrp_add - adds a new MRP instance. br_mrp_del - deletes an existing MRP instance. Each instance has an ID(ring_id). br_mrp_set_port_state - changes the port state. The port can be in forwarding state, which means that the frames can pass through or in blocked state which means that the frames can't pass through except MRP frames. This will eventually call the switchdev API to notify the HW. This information is used also by the SW bridge to know how to forward frames in case the HW doesn't have this capability. br_mrp_set_port_role - a port role can be primary or secondary. This information is required to be pushed to HW in case the HW can generate MRP_Test frames. Because the MRP_Test frames contains a file with this information. Otherwise the HW will not be able to generate the frames correctly. br_mrp_set_ring_state - a ring can be in state open or closed. State open means that the mrp port stopped receiving MRP_Test frames, while closed means that the mrp port received MRP_Test frames. Similar with br_mrp_port_role, this information is pushed in HW because the MRP_Test frames contain this information. br_mrp_set_ring_role - a ring can have the following roles MRM or MRC. For the role MRM it is expected that the HW can terminate the MRP frames, notify the SW that it stopped receiving MRP_Test frames and trapp all the other MRP frames. While for MRC mode it is expected that the HW can forward the MRP frames only between the MRP ports and copy MRP_Topology frames to CPU. In case the HW doesn't support a role it needs to return an error code different than -EOPNOTSUPP. br_mrp_start_test - this starts/stops the generation of MRP_Test frames. To stop the generation of frames the interval needs to have a value of 0. In this case the userspace needs to know if the HW supports this or not. Not to have duplicate frames(generated by HW and SW). Because if the HW supports this then the SW will not generate anymore frames and will expect that the HW will notify when it stopped receiving MRP frames using the function br_mrp_port_open. br_mrp_port_open - this function is used by drivers to notify the userspace via a netlink callback that one of the ports stopped receiving MRP_Test frames. This function is called only when the node has the role MRM. It is not supposed to be called from userspace. br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add, and will notify the HW that a MRP instance is added. The function gets as parameter the MRP instance. br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del, and will notify the HW that a MRP instance is removed. The function gets as parameter the ID of the MRP instance that is removed. br_mrp_port_switchdev_set_state - this corresponds to the function br_mrp_set_port_state. It would notify the HW if it should block or not non-MRP frames. br_mrp_port_switchdev_set_port - this corresponds to the function br_mrp_set_port_role. It would set the port role, primary or secondary. br_mrp_switchdev_set_role - this corresponds to the function br_mrp_set_ring_role and would set one of the role MRM or MRC. br_mrp_switchdev_set_ring_state - this corresponds to the function br_mrp_set_ring_state and would set the ring to be open or closed. br_mrp_switchdev_send_ring_test - this corresponds to the function br_mrp_start_test. This will notify the HW to start or stop generating MRP_Test frames. Value 0 for the interval parameter means to stop generating the frames. br_mrp_port_open - this function is used to notify the userspace that the port lost the continuity of MRP Test frames. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-26 16:22:02 +03:00
u32 ring_id;
bridge: mrp: Extend br_mrp for MRP interconnect This patch extends the 'struct br_mrp' to contain information regarding the MRP interconnect. It contains the following: - the interconnect port 'i_port', which is NULL if the node doesn't have a interconnect role - the interconnect id, which is similar with the ring id, but this field is also part of the MRP_InTest frames. - the interconnect role, which can be MIM or MIC. - the interconnect state, which can be open or closed. - the interconnect delayed_work for sending MRP_InTest frames and check for lost of continuity. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 10:34:50 +03:00
u16 in_id;
bridge: mrp: Set the priority of MRP instance Each MRP instance has a priority, a lower value means a higher priority. The priority of MRP instance is stored in MRP_Test frame in this way all the MRP nodes in the ring can see other nodes priority. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30 21:09:47 +03:00
u16 prio;
bridge: mrp: Add MRP interface. Define the MRP interface. This interface is used by the netlink to update the MRP instances and by the MRP to make the calls to switchdev to offload it to HW. It defines an MRP instance 'struct br_mrp' which is a list of MRP instances. Which will be part of the 'struct net_bridge'. Each instance has 2 ring ports, a bridge and an ID. In case the HW can't generate MRP Test frames then the SW will generate those. br_mrp_add - adds a new MRP instance. br_mrp_del - deletes an existing MRP instance. Each instance has an ID(ring_id). br_mrp_set_port_state - changes the port state. The port can be in forwarding state, which means that the frames can pass through or in blocked state which means that the frames can't pass through except MRP frames. This will eventually call the switchdev API to notify the HW. This information is used also by the SW bridge to know how to forward frames in case the HW doesn't have this capability. br_mrp_set_port_role - a port role can be primary or secondary. This information is required to be pushed to HW in case the HW can generate MRP_Test frames. Because the MRP_Test frames contains a file with this information. Otherwise the HW will not be able to generate the frames correctly. br_mrp_set_ring_state - a ring can be in state open or closed. State open means that the mrp port stopped receiving MRP_Test frames, while closed means that the mrp port received MRP_Test frames. Similar with br_mrp_port_role, this information is pushed in HW because the MRP_Test frames contain this information. br_mrp_set_ring_role - a ring can have the following roles MRM or MRC. For the role MRM it is expected that the HW can terminate the MRP frames, notify the SW that it stopped receiving MRP_Test frames and trapp all the other MRP frames. While for MRC mode it is expected that the HW can forward the MRP frames only between the MRP ports and copy MRP_Topology frames to CPU. In case the HW doesn't support a role it needs to return an error code different than -EOPNOTSUPP. br_mrp_start_test - this starts/stops the generation of MRP_Test frames. To stop the generation of frames the interval needs to have a value of 0. In this case the userspace needs to know if the HW supports this or not. Not to have duplicate frames(generated by HW and SW). Because if the HW supports this then the SW will not generate anymore frames and will expect that the HW will notify when it stopped receiving MRP frames using the function br_mrp_port_open. br_mrp_port_open - this function is used by drivers to notify the userspace via a netlink callback that one of the ports stopped receiving MRP_Test frames. This function is called only when the node has the role MRM. It is not supposed to be called from userspace. br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add, and will notify the HW that a MRP instance is added. The function gets as parameter the MRP instance. br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del, and will notify the HW that a MRP instance is removed. The function gets as parameter the ID of the MRP instance that is removed. br_mrp_port_switchdev_set_state - this corresponds to the function br_mrp_set_port_state. It would notify the HW if it should block or not non-MRP frames. br_mrp_port_switchdev_set_port - this corresponds to the function br_mrp_set_port_role. It would set the port role, primary or secondary. br_mrp_switchdev_set_role - this corresponds to the function br_mrp_set_ring_role and would set one of the role MRM or MRC. br_mrp_switchdev_set_ring_state - this corresponds to the function br_mrp_set_ring_state and would set the ring to be open or closed. br_mrp_switchdev_send_ring_test - this corresponds to the function br_mrp_start_test. This will notify the HW to start or stop generating MRP_Test frames. Value 0 for the interval parameter means to stop generating the frames. br_mrp_port_open - this function is used to notify the userspace that the port lost the continuity of MRP Test frames. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-26 16:22:02 +03:00
enum br_mrp_ring_role_type ring_role;
u8 ring_role_offloaded;
enum br_mrp_ring_state_type ring_state;
u32 ring_transitions;
bridge: mrp: Extend br_mrp for MRP interconnect This patch extends the 'struct br_mrp' to contain information regarding the MRP interconnect. It contains the following: - the interconnect port 'i_port', which is NULL if the node doesn't have a interconnect role - the interconnect id, which is similar with the ring id, but this field is also part of the MRP_InTest frames. - the interconnect role, which can be MIM or MIC. - the interconnect state, which can be open or closed. - the interconnect delayed_work for sending MRP_InTest frames and check for lost of continuity. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 10:34:50 +03:00
enum br_mrp_in_role_type in_role;
u8 in_role_offloaded;
enum br_mrp_in_state_type in_state;
u32 in_transitions;
bridge: mrp: Add MRP interface. Define the MRP interface. This interface is used by the netlink to update the MRP instances and by the MRP to make the calls to switchdev to offload it to HW. It defines an MRP instance 'struct br_mrp' which is a list of MRP instances. Which will be part of the 'struct net_bridge'. Each instance has 2 ring ports, a bridge and an ID. In case the HW can't generate MRP Test frames then the SW will generate those. br_mrp_add - adds a new MRP instance. br_mrp_del - deletes an existing MRP instance. Each instance has an ID(ring_id). br_mrp_set_port_state - changes the port state. The port can be in forwarding state, which means that the frames can pass through or in blocked state which means that the frames can't pass through except MRP frames. This will eventually call the switchdev API to notify the HW. This information is used also by the SW bridge to know how to forward frames in case the HW doesn't have this capability. br_mrp_set_port_role - a port role can be primary or secondary. This information is required to be pushed to HW in case the HW can generate MRP_Test frames. Because the MRP_Test frames contains a file with this information. Otherwise the HW will not be able to generate the frames correctly. br_mrp_set_ring_state - a ring can be in state open or closed. State open means that the mrp port stopped receiving MRP_Test frames, while closed means that the mrp port received MRP_Test frames. Similar with br_mrp_port_role, this information is pushed in HW because the MRP_Test frames contain this information. br_mrp_set_ring_role - a ring can have the following roles MRM or MRC. For the role MRM it is expected that the HW can terminate the MRP frames, notify the SW that it stopped receiving MRP_Test frames and trapp all the other MRP frames. While for MRC mode it is expected that the HW can forward the MRP frames only between the MRP ports and copy MRP_Topology frames to CPU. In case the HW doesn't support a role it needs to return an error code different than -EOPNOTSUPP. br_mrp_start_test - this starts/stops the generation of MRP_Test frames. To stop the generation of frames the interval needs to have a value of 0. In this case the userspace needs to know if the HW supports this or not. Not to have duplicate frames(generated by HW and SW). Because if the HW supports this then the SW will not generate anymore frames and will expect that the HW will notify when it stopped receiving MRP frames using the function br_mrp_port_open. br_mrp_port_open - this function is used by drivers to notify the userspace via a netlink callback that one of the ports stopped receiving MRP_Test frames. This function is called only when the node has the role MRM. It is not supposed to be called from userspace. br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add, and will notify the HW that a MRP instance is added. The function gets as parameter the MRP instance. br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del, and will notify the HW that a MRP instance is removed. The function gets as parameter the ID of the MRP instance that is removed. br_mrp_port_switchdev_set_state - this corresponds to the function br_mrp_set_port_state. It would notify the HW if it should block or not non-MRP frames. br_mrp_port_switchdev_set_port - this corresponds to the function br_mrp_set_port_role. It would set the port role, primary or secondary. br_mrp_switchdev_set_role - this corresponds to the function br_mrp_set_ring_role and would set one of the role MRM or MRC. br_mrp_switchdev_set_ring_state - this corresponds to the function br_mrp_set_ring_state and would set the ring to be open or closed. br_mrp_switchdev_send_ring_test - this corresponds to the function br_mrp_start_test. This will notify the HW to start or stop generating MRP_Test frames. Value 0 for the interval parameter means to stop generating the frames. br_mrp_port_open - this function is used to notify the userspace that the port lost the continuity of MRP Test frames. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-26 16:22:02 +03:00
struct delayed_work test_work;
u32 test_interval;
unsigned long test_end;
u32 test_count_miss;
u32 test_max_miss;
bridge: mrp: Add support for role MRA A node that has the MRA role, it can behave as MRM or MRC. Initially it starts as MRM and sends MRP_Test frames on both ring ports. If it detects that there are MRP_Test send by another MRM, then it checks if these frames have a lower priority than itself. In this case it would send MRP_Nack frames to notify the other node that it needs to stop sending MRP_Test frames. If it receives a MRP_Nack frame then it stops sending MRP_Test frames and starts to behave as a MRC but it would continue to monitor the MRP_Test frames send by MRM. If at a point the MRM stops to send MRP_Test frames it would get the MRM role and start to send MRP_Test frames. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30 21:09:48 +03:00
bool test_monitor;
bridge: mrp: Add MRP interface. Define the MRP interface. This interface is used by the netlink to update the MRP instances and by the MRP to make the calls to switchdev to offload it to HW. It defines an MRP instance 'struct br_mrp' which is a list of MRP instances. Which will be part of the 'struct net_bridge'. Each instance has 2 ring ports, a bridge and an ID. In case the HW can't generate MRP Test frames then the SW will generate those. br_mrp_add - adds a new MRP instance. br_mrp_del - deletes an existing MRP instance. Each instance has an ID(ring_id). br_mrp_set_port_state - changes the port state. The port can be in forwarding state, which means that the frames can pass through or in blocked state which means that the frames can't pass through except MRP frames. This will eventually call the switchdev API to notify the HW. This information is used also by the SW bridge to know how to forward frames in case the HW doesn't have this capability. br_mrp_set_port_role - a port role can be primary or secondary. This information is required to be pushed to HW in case the HW can generate MRP_Test frames. Because the MRP_Test frames contains a file with this information. Otherwise the HW will not be able to generate the frames correctly. br_mrp_set_ring_state - a ring can be in state open or closed. State open means that the mrp port stopped receiving MRP_Test frames, while closed means that the mrp port received MRP_Test frames. Similar with br_mrp_port_role, this information is pushed in HW because the MRP_Test frames contain this information. br_mrp_set_ring_role - a ring can have the following roles MRM or MRC. For the role MRM it is expected that the HW can terminate the MRP frames, notify the SW that it stopped receiving MRP_Test frames and trapp all the other MRP frames. While for MRC mode it is expected that the HW can forward the MRP frames only between the MRP ports and copy MRP_Topology frames to CPU. In case the HW doesn't support a role it needs to return an error code different than -EOPNOTSUPP. br_mrp_start_test - this starts/stops the generation of MRP_Test frames. To stop the generation of frames the interval needs to have a value of 0. In this case the userspace needs to know if the HW supports this or not. Not to have duplicate frames(generated by HW and SW). Because if the HW supports this then the SW will not generate anymore frames and will expect that the HW will notify when it stopped receiving MRP frames using the function br_mrp_port_open. br_mrp_port_open - this function is used by drivers to notify the userspace via a netlink callback that one of the ports stopped receiving MRP_Test frames. This function is called only when the node has the role MRM. It is not supposed to be called from userspace. br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add, and will notify the HW that a MRP instance is added. The function gets as parameter the MRP instance. br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del, and will notify the HW that a MRP instance is removed. The function gets as parameter the ID of the MRP instance that is removed. br_mrp_port_switchdev_set_state - this corresponds to the function br_mrp_set_port_state. It would notify the HW if it should block or not non-MRP frames. br_mrp_port_switchdev_set_port - this corresponds to the function br_mrp_set_port_role. It would set the port role, primary or secondary. br_mrp_switchdev_set_role - this corresponds to the function br_mrp_set_ring_role and would set one of the role MRM or MRC. br_mrp_switchdev_set_ring_state - this corresponds to the function br_mrp_set_ring_state and would set the ring to be open or closed. br_mrp_switchdev_send_ring_test - this corresponds to the function br_mrp_start_test. This will notify the HW to start or stop generating MRP_Test frames. Value 0 for the interval parameter means to stop generating the frames. br_mrp_port_open - this function is used to notify the userspace that the port lost the continuity of MRP Test frames. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-26 16:22:02 +03:00
bridge: mrp: Extend br_mrp for MRP interconnect This patch extends the 'struct br_mrp' to contain information regarding the MRP interconnect. It contains the following: - the interconnect port 'i_port', which is NULL if the node doesn't have a interconnect role - the interconnect id, which is similar with the ring id, but this field is also part of the MRP_InTest frames. - the interconnect role, which can be MIM or MIC. - the interconnect state, which can be open or closed. - the interconnect delayed_work for sending MRP_InTest frames and check for lost of continuity. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 10:34:50 +03:00
struct delayed_work in_test_work;
u32 in_test_interval;
unsigned long in_test_end;
u32 in_test_count_miss;
u32 in_test_max_miss;
bridge: mrp: Add MRP interface. Define the MRP interface. This interface is used by the netlink to update the MRP instances and by the MRP to make the calls to switchdev to offload it to HW. It defines an MRP instance 'struct br_mrp' which is a list of MRP instances. Which will be part of the 'struct net_bridge'. Each instance has 2 ring ports, a bridge and an ID. In case the HW can't generate MRP Test frames then the SW will generate those. br_mrp_add - adds a new MRP instance. br_mrp_del - deletes an existing MRP instance. Each instance has an ID(ring_id). br_mrp_set_port_state - changes the port state. The port can be in forwarding state, which means that the frames can pass through or in blocked state which means that the frames can't pass through except MRP frames. This will eventually call the switchdev API to notify the HW. This information is used also by the SW bridge to know how to forward frames in case the HW doesn't have this capability. br_mrp_set_port_role - a port role can be primary or secondary. This information is required to be pushed to HW in case the HW can generate MRP_Test frames. Because the MRP_Test frames contains a file with this information. Otherwise the HW will not be able to generate the frames correctly. br_mrp_set_ring_state - a ring can be in state open or closed. State open means that the mrp port stopped receiving MRP_Test frames, while closed means that the mrp port received MRP_Test frames. Similar with br_mrp_port_role, this information is pushed in HW because the MRP_Test frames contain this information. br_mrp_set_ring_role - a ring can have the following roles MRM or MRC. For the role MRM it is expected that the HW can terminate the MRP frames, notify the SW that it stopped receiving MRP_Test frames and trapp all the other MRP frames. While for MRC mode it is expected that the HW can forward the MRP frames only between the MRP ports and copy MRP_Topology frames to CPU. In case the HW doesn't support a role it needs to return an error code different than -EOPNOTSUPP. br_mrp_start_test - this starts/stops the generation of MRP_Test frames. To stop the generation of frames the interval needs to have a value of 0. In this case the userspace needs to know if the HW supports this or not. Not to have duplicate frames(generated by HW and SW). Because if the HW supports this then the SW will not generate anymore frames and will expect that the HW will notify when it stopped receiving MRP frames using the function br_mrp_port_open. br_mrp_port_open - this function is used by drivers to notify the userspace via a netlink callback that one of the ports stopped receiving MRP_Test frames. This function is called only when the node has the role MRM. It is not supposed to be called from userspace. br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add, and will notify the HW that a MRP instance is added. The function gets as parameter the MRP instance. br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del, and will notify the HW that a MRP instance is removed. The function gets as parameter the ID of the MRP instance that is removed. br_mrp_port_switchdev_set_state - this corresponds to the function br_mrp_set_port_state. It would notify the HW if it should block or not non-MRP frames. br_mrp_port_switchdev_set_port - this corresponds to the function br_mrp_set_port_role. It would set the port role, primary or secondary. br_mrp_switchdev_set_role - this corresponds to the function br_mrp_set_ring_role and would set one of the role MRM or MRC. br_mrp_switchdev_set_ring_state - this corresponds to the function br_mrp_set_ring_state and would set the ring to be open or closed. br_mrp_switchdev_send_ring_test - this corresponds to the function br_mrp_start_test. This will notify the HW to start or stop generating MRP_Test frames. Value 0 for the interval parameter means to stop generating the frames. br_mrp_port_open - this function is used to notify the userspace that the port lost the continuity of MRP Test frames. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-26 16:22:02 +03:00
u32 seq_id;
struct rcu_head rcu;
};
bridge: mrp: Add 'enum br_mrp_hw_support' Add the enum br_mrp_hw_support that is used by the br_mrp_switchdev functions to allow the SW to detect the cases where HW can't implement the functionality or when SW is used as a backup. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17 00:42:00 +03:00
/* This type is returned by br_mrp_switchdev functions that allow to have a SW
* backup in case the HW can't implement completely the protocol.
* BR_MRP_NONE - means the HW can't run at all the protocol, so the SW stops
* configuring the node anymore.
* BR_MRP_SW - the HW can help the SW to run the protocol, by redirecting MRP
* frames to CPU.
* BR_MRP_HW - the HW can implement completely the protocol.
*/
enum br_mrp_hw_support {
BR_MRP_NONE,
BR_MRP_SW,
BR_MRP_HW,
};
bridge: mrp: Add MRP interface. Define the MRP interface. This interface is used by the netlink to update the MRP instances and by the MRP to make the calls to switchdev to offload it to HW. It defines an MRP instance 'struct br_mrp' which is a list of MRP instances. Which will be part of the 'struct net_bridge'. Each instance has 2 ring ports, a bridge and an ID. In case the HW can't generate MRP Test frames then the SW will generate those. br_mrp_add - adds a new MRP instance. br_mrp_del - deletes an existing MRP instance. Each instance has an ID(ring_id). br_mrp_set_port_state - changes the port state. The port can be in forwarding state, which means that the frames can pass through or in blocked state which means that the frames can't pass through except MRP frames. This will eventually call the switchdev API to notify the HW. This information is used also by the SW bridge to know how to forward frames in case the HW doesn't have this capability. br_mrp_set_port_role - a port role can be primary or secondary. This information is required to be pushed to HW in case the HW can generate MRP_Test frames. Because the MRP_Test frames contains a file with this information. Otherwise the HW will not be able to generate the frames correctly. br_mrp_set_ring_state - a ring can be in state open or closed. State open means that the mrp port stopped receiving MRP_Test frames, while closed means that the mrp port received MRP_Test frames. Similar with br_mrp_port_role, this information is pushed in HW because the MRP_Test frames contain this information. br_mrp_set_ring_role - a ring can have the following roles MRM or MRC. For the role MRM it is expected that the HW can terminate the MRP frames, notify the SW that it stopped receiving MRP_Test frames and trapp all the other MRP frames. While for MRC mode it is expected that the HW can forward the MRP frames only between the MRP ports and copy MRP_Topology frames to CPU. In case the HW doesn't support a role it needs to return an error code different than -EOPNOTSUPP. br_mrp_start_test - this starts/stops the generation of MRP_Test frames. To stop the generation of frames the interval needs to have a value of 0. In this case the userspace needs to know if the HW supports this or not. Not to have duplicate frames(generated by HW and SW). Because if the HW supports this then the SW will not generate anymore frames and will expect that the HW will notify when it stopped receiving MRP frames using the function br_mrp_port_open. br_mrp_port_open - this function is used by drivers to notify the userspace via a netlink callback that one of the ports stopped receiving MRP_Test frames. This function is called only when the node has the role MRM. It is not supposed to be called from userspace. br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add, and will notify the HW that a MRP instance is added. The function gets as parameter the MRP instance. br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del, and will notify the HW that a MRP instance is removed. The function gets as parameter the ID of the MRP instance that is removed. br_mrp_port_switchdev_set_state - this corresponds to the function br_mrp_set_port_state. It would notify the HW if it should block or not non-MRP frames. br_mrp_port_switchdev_set_port - this corresponds to the function br_mrp_set_port_role. It would set the port role, primary or secondary. br_mrp_switchdev_set_role - this corresponds to the function br_mrp_set_ring_role and would set one of the role MRM or MRC. br_mrp_switchdev_set_ring_state - this corresponds to the function br_mrp_set_ring_state and would set the ring to be open or closed. br_mrp_switchdev_send_ring_test - this corresponds to the function br_mrp_start_test. This will notify the HW to start or stop generating MRP_Test frames. Value 0 for the interval parameter means to stop generating the frames. br_mrp_port_open - this function is used to notify the userspace that the port lost the continuity of MRP Test frames. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-26 16:22:02 +03:00
/* br_mrp.c */
int br_mrp_add(struct net_bridge *br, struct br_mrp_instance *instance);
int br_mrp_del(struct net_bridge *br, struct br_mrp_instance *instance);
int br_mrp_set_port_state(struct net_bridge_port *p,
enum br_mrp_port_state_type state);
int br_mrp_set_port_role(struct net_bridge_port *p,
bridge: mrp: Rework the MRP netlink interface This patch reworks the MRP netlink interface. Before, each attribute represented a binary structure which made it hard to be extended. Therefore update the MRP netlink interface such that each existing attribute to be a nested attribute which contains the fields of the binary structures. In this way the MRP netlink interface can be extended without breaking the backwards compatibility. It is also using strict checking for attributes under the MRP top attribute. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27 15:34:30 +03:00
enum br_mrp_port_role_type role);
bridge: mrp: Add MRP interface. Define the MRP interface. This interface is used by the netlink to update the MRP instances and by the MRP to make the calls to switchdev to offload it to HW. It defines an MRP instance 'struct br_mrp' which is a list of MRP instances. Which will be part of the 'struct net_bridge'. Each instance has 2 ring ports, a bridge and an ID. In case the HW can't generate MRP Test frames then the SW will generate those. br_mrp_add - adds a new MRP instance. br_mrp_del - deletes an existing MRP instance. Each instance has an ID(ring_id). br_mrp_set_port_state - changes the port state. The port can be in forwarding state, which means that the frames can pass through or in blocked state which means that the frames can't pass through except MRP frames. This will eventually call the switchdev API to notify the HW. This information is used also by the SW bridge to know how to forward frames in case the HW doesn't have this capability. br_mrp_set_port_role - a port role can be primary or secondary. This information is required to be pushed to HW in case the HW can generate MRP_Test frames. Because the MRP_Test frames contains a file with this information. Otherwise the HW will not be able to generate the frames correctly. br_mrp_set_ring_state - a ring can be in state open or closed. State open means that the mrp port stopped receiving MRP_Test frames, while closed means that the mrp port received MRP_Test frames. Similar with br_mrp_port_role, this information is pushed in HW because the MRP_Test frames contain this information. br_mrp_set_ring_role - a ring can have the following roles MRM or MRC. For the role MRM it is expected that the HW can terminate the MRP frames, notify the SW that it stopped receiving MRP_Test frames and trapp all the other MRP frames. While for MRC mode it is expected that the HW can forward the MRP frames only between the MRP ports and copy MRP_Topology frames to CPU. In case the HW doesn't support a role it needs to return an error code different than -EOPNOTSUPP. br_mrp_start_test - this starts/stops the generation of MRP_Test frames. To stop the generation of frames the interval needs to have a value of 0. In this case the userspace needs to know if the HW supports this or not. Not to have duplicate frames(generated by HW and SW). Because if the HW supports this then the SW will not generate anymore frames and will expect that the HW will notify when it stopped receiving MRP frames using the function br_mrp_port_open. br_mrp_port_open - this function is used by drivers to notify the userspace via a netlink callback that one of the ports stopped receiving MRP_Test frames. This function is called only when the node has the role MRM. It is not supposed to be called from userspace. br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add, and will notify the HW that a MRP instance is added. The function gets as parameter the MRP instance. br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del, and will notify the HW that a MRP instance is removed. The function gets as parameter the ID of the MRP instance that is removed. br_mrp_port_switchdev_set_state - this corresponds to the function br_mrp_set_port_state. It would notify the HW if it should block or not non-MRP frames. br_mrp_port_switchdev_set_port - this corresponds to the function br_mrp_set_port_role. It would set the port role, primary or secondary. br_mrp_switchdev_set_role - this corresponds to the function br_mrp_set_ring_role and would set one of the role MRM or MRC. br_mrp_switchdev_set_ring_state - this corresponds to the function br_mrp_set_ring_state and would set the ring to be open or closed. br_mrp_switchdev_send_ring_test - this corresponds to the function br_mrp_start_test. This will notify the HW to start or stop generating MRP_Test frames. Value 0 for the interval parameter means to stop generating the frames. br_mrp_port_open - this function is used to notify the userspace that the port lost the continuity of MRP Test frames. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-26 16:22:02 +03:00
int br_mrp_set_ring_state(struct net_bridge *br,
struct br_mrp_ring_state *state);
int br_mrp_set_ring_role(struct net_bridge *br, struct br_mrp_ring_role *role);
int br_mrp_start_test(struct net_bridge *br, struct br_mrp_start_test *test);
bridge: mrp: Implement the MRP Interconnect API Thie patch adds support for MRP Interconnect. Similar with the MRP ring, if the HW can't generate MRP_InTest frames, then the SW will try to generate them. And if also the SW fails to generate the frames then an error is return to userspace. The forwarding/termination of MRP_In frames is happening in the kernel and is done by MRP instances. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 10:34:54 +03:00
int br_mrp_set_in_state(struct net_bridge *br, struct br_mrp_in_state *state);
int br_mrp_set_in_role(struct net_bridge *br, struct br_mrp_in_role *role);
int br_mrp_start_in_test(struct net_bridge *br,
struct br_mrp_start_in_test *test);
bridge: mrp: Add MRP interface. Define the MRP interface. This interface is used by the netlink to update the MRP instances and by the MRP to make the calls to switchdev to offload it to HW. It defines an MRP instance 'struct br_mrp' which is a list of MRP instances. Which will be part of the 'struct net_bridge'. Each instance has 2 ring ports, a bridge and an ID. In case the HW can't generate MRP Test frames then the SW will generate those. br_mrp_add - adds a new MRP instance. br_mrp_del - deletes an existing MRP instance. Each instance has an ID(ring_id). br_mrp_set_port_state - changes the port state. The port can be in forwarding state, which means that the frames can pass through or in blocked state which means that the frames can't pass through except MRP frames. This will eventually call the switchdev API to notify the HW. This information is used also by the SW bridge to know how to forward frames in case the HW doesn't have this capability. br_mrp_set_port_role - a port role can be primary or secondary. This information is required to be pushed to HW in case the HW can generate MRP_Test frames. Because the MRP_Test frames contains a file with this information. Otherwise the HW will not be able to generate the frames correctly. br_mrp_set_ring_state - a ring can be in state open or closed. State open means that the mrp port stopped receiving MRP_Test frames, while closed means that the mrp port received MRP_Test frames. Similar with br_mrp_port_role, this information is pushed in HW because the MRP_Test frames contain this information. br_mrp_set_ring_role - a ring can have the following roles MRM or MRC. For the role MRM it is expected that the HW can terminate the MRP frames, notify the SW that it stopped receiving MRP_Test frames and trapp all the other MRP frames. While for MRC mode it is expected that the HW can forward the MRP frames only between the MRP ports and copy MRP_Topology frames to CPU. In case the HW doesn't support a role it needs to return an error code different than -EOPNOTSUPP. br_mrp_start_test - this starts/stops the generation of MRP_Test frames. To stop the generation of frames the interval needs to have a value of 0. In this case the userspace needs to know if the HW supports this or not. Not to have duplicate frames(generated by HW and SW). Because if the HW supports this then the SW will not generate anymore frames and will expect that the HW will notify when it stopped receiving MRP frames using the function br_mrp_port_open. br_mrp_port_open - this function is used by drivers to notify the userspace via a netlink callback that one of the ports stopped receiving MRP_Test frames. This function is called only when the node has the role MRM. It is not supposed to be called from userspace. br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add, and will notify the HW that a MRP instance is added. The function gets as parameter the MRP instance. br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del, and will notify the HW that a MRP instance is removed. The function gets as parameter the ID of the MRP instance that is removed. br_mrp_port_switchdev_set_state - this corresponds to the function br_mrp_set_port_state. It would notify the HW if it should block or not non-MRP frames. br_mrp_port_switchdev_set_port - this corresponds to the function br_mrp_set_port_role. It would set the port role, primary or secondary. br_mrp_switchdev_set_role - this corresponds to the function br_mrp_set_ring_role and would set one of the role MRM or MRC. br_mrp_switchdev_set_ring_state - this corresponds to the function br_mrp_set_ring_state and would set the ring to be open or closed. br_mrp_switchdev_send_ring_test - this corresponds to the function br_mrp_start_test. This will notify the HW to start or stop generating MRP_Test frames. Value 0 for the interval parameter means to stop generating the frames. br_mrp_port_open - this function is used to notify the userspace that the port lost the continuity of MRP Test frames. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-26 16:22:02 +03:00
/* br_mrp_switchdev.c */
int br_mrp_switchdev_add(struct net_bridge *br, struct br_mrp *mrp);
int br_mrp_switchdev_del(struct net_bridge *br, struct br_mrp *mrp);
int br_mrp_switchdev_set_ring_role(struct net_bridge *br, struct br_mrp *mrp,
enum br_mrp_ring_role_type role);
int br_mrp_switchdev_set_ring_state(struct net_bridge *br, struct br_mrp *mrp,
enum br_mrp_ring_state_type state);
int br_mrp_switchdev_send_ring_test(struct net_bridge *br, struct br_mrp *mrp,
bridge: mrp: Add support for role MRA A node that has the MRA role, it can behave as MRM or MRC. Initially it starts as MRM and sends MRP_Test frames on both ring ports. If it detects that there are MRP_Test send by another MRM, then it checks if these frames have a lower priority than itself. In this case it would send MRP_Nack frames to notify the other node that it needs to stop sending MRP_Test frames. If it receives a MRP_Nack frame then it stops sending MRP_Test frames and starts to behave as a MRC but it would continue to monitor the MRP_Test frames send by MRM. If at a point the MRM stops to send MRP_Test frames it would get the MRM role and start to send MRP_Test frames. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-30 21:09:48 +03:00
u32 interval, u8 max_miss, u32 period,
bool monitor);
bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state The function br_mrp_port_switchdev_set_state was called both with MRP port state and STP port state, which is an issue because they don't match exactly. Therefore, update the function to be used only with STP port state and use the id SWITCHDEV_ATTR_ID_PORT_STP_STATE. The choice of using STP over MRP is that the drivers already implement SWITCHDEV_ATTR_ID_PORT_STP_STATE and already in SW we update the port STP state. Fixes: 9a9f26e8f7ea30 ("bridge: mrp: Connect MRP API with the switchdev API") Fixes: fadd409136f0f2 ("bridge: switchdev: mrp: Implement MRP API for switchdev") Fixes: 2f1a11ae11d222 ("bridge: mrp: Add MRP interface.") Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07 00:47:33 +03:00
int br_mrp_port_switchdev_set_state(struct net_bridge_port *p, u32 state);
bridge: mrp: Add MRP interface. Define the MRP interface. This interface is used by the netlink to update the MRP instances and by the MRP to make the calls to switchdev to offload it to HW. It defines an MRP instance 'struct br_mrp' which is a list of MRP instances. Which will be part of the 'struct net_bridge'. Each instance has 2 ring ports, a bridge and an ID. In case the HW can't generate MRP Test frames then the SW will generate those. br_mrp_add - adds a new MRP instance. br_mrp_del - deletes an existing MRP instance. Each instance has an ID(ring_id). br_mrp_set_port_state - changes the port state. The port can be in forwarding state, which means that the frames can pass through or in blocked state which means that the frames can't pass through except MRP frames. This will eventually call the switchdev API to notify the HW. This information is used also by the SW bridge to know how to forward frames in case the HW doesn't have this capability. br_mrp_set_port_role - a port role can be primary or secondary. This information is required to be pushed to HW in case the HW can generate MRP_Test frames. Because the MRP_Test frames contains a file with this information. Otherwise the HW will not be able to generate the frames correctly. br_mrp_set_ring_state - a ring can be in state open or closed. State open means that the mrp port stopped receiving MRP_Test frames, while closed means that the mrp port received MRP_Test frames. Similar with br_mrp_port_role, this information is pushed in HW because the MRP_Test frames contain this information. br_mrp_set_ring_role - a ring can have the following roles MRM or MRC. For the role MRM it is expected that the HW can terminate the MRP frames, notify the SW that it stopped receiving MRP_Test frames and trapp all the other MRP frames. While for MRC mode it is expected that the HW can forward the MRP frames only between the MRP ports and copy MRP_Topology frames to CPU. In case the HW doesn't support a role it needs to return an error code different than -EOPNOTSUPP. br_mrp_start_test - this starts/stops the generation of MRP_Test frames. To stop the generation of frames the interval needs to have a value of 0. In this case the userspace needs to know if the HW supports this or not. Not to have duplicate frames(generated by HW and SW). Because if the HW supports this then the SW will not generate anymore frames and will expect that the HW will notify when it stopped receiving MRP frames using the function br_mrp_port_open. br_mrp_port_open - this function is used by drivers to notify the userspace via a netlink callback that one of the ports stopped receiving MRP_Test frames. This function is called only when the node has the role MRM. It is not supposed to be called from userspace. br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add, and will notify the HW that a MRP instance is added. The function gets as parameter the MRP instance. br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del, and will notify the HW that a MRP instance is removed. The function gets as parameter the ID of the MRP instance that is removed. br_mrp_port_switchdev_set_state - this corresponds to the function br_mrp_set_port_state. It would notify the HW if it should block or not non-MRP frames. br_mrp_port_switchdev_set_port - this corresponds to the function br_mrp_set_port_role. It would set the port role, primary or secondary. br_mrp_switchdev_set_role - this corresponds to the function br_mrp_set_ring_role and would set one of the role MRM or MRC. br_mrp_switchdev_set_ring_state - this corresponds to the function br_mrp_set_ring_state and would set the ring to be open or closed. br_mrp_switchdev_send_ring_test - this corresponds to the function br_mrp_start_test. This will notify the HW to start or stop generating MRP_Test frames. Value 0 for the interval parameter means to stop generating the frames. br_mrp_port_open - this function is used to notify the userspace that the port lost the continuity of MRP Test frames. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-26 16:22:02 +03:00
int br_mrp_port_switchdev_set_role(struct net_bridge_port *p,
enum br_mrp_port_role_type role);
bridge: switchdev: mrp: Extend MRP API for switchdev for MRP Interconnect Implement the MRP API for interconnect switchdev. Similar with the other br_mrp_switchdev function, these function will just eventually call the switchdev functions: switchdev_port_obj_add/del. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 10:34:53 +03:00
int br_mrp_switchdev_set_in_role(struct net_bridge *br, struct br_mrp *mrp,
u16 in_id, u32 ring_id,
enum br_mrp_in_role_type role);
int br_mrp_switchdev_set_in_state(struct net_bridge *br, struct br_mrp *mrp,
enum br_mrp_in_state_type state);
int br_mrp_switchdev_send_in_test(struct net_bridge *br, struct br_mrp *mrp,
u32 interval, u8 max_miss, u32 period);
bridge: mrp: Add MRP interface. Define the MRP interface. This interface is used by the netlink to update the MRP instances and by the MRP to make the calls to switchdev to offload it to HW. It defines an MRP instance 'struct br_mrp' which is a list of MRP instances. Which will be part of the 'struct net_bridge'. Each instance has 2 ring ports, a bridge and an ID. In case the HW can't generate MRP Test frames then the SW will generate those. br_mrp_add - adds a new MRP instance. br_mrp_del - deletes an existing MRP instance. Each instance has an ID(ring_id). br_mrp_set_port_state - changes the port state. The port can be in forwarding state, which means that the frames can pass through or in blocked state which means that the frames can't pass through except MRP frames. This will eventually call the switchdev API to notify the HW. This information is used also by the SW bridge to know how to forward frames in case the HW doesn't have this capability. br_mrp_set_port_role - a port role can be primary or secondary. This information is required to be pushed to HW in case the HW can generate MRP_Test frames. Because the MRP_Test frames contains a file with this information. Otherwise the HW will not be able to generate the frames correctly. br_mrp_set_ring_state - a ring can be in state open or closed. State open means that the mrp port stopped receiving MRP_Test frames, while closed means that the mrp port received MRP_Test frames. Similar with br_mrp_port_role, this information is pushed in HW because the MRP_Test frames contain this information. br_mrp_set_ring_role - a ring can have the following roles MRM or MRC. For the role MRM it is expected that the HW can terminate the MRP frames, notify the SW that it stopped receiving MRP_Test frames and trapp all the other MRP frames. While for MRC mode it is expected that the HW can forward the MRP frames only between the MRP ports and copy MRP_Topology frames to CPU. In case the HW doesn't support a role it needs to return an error code different than -EOPNOTSUPP. br_mrp_start_test - this starts/stops the generation of MRP_Test frames. To stop the generation of frames the interval needs to have a value of 0. In this case the userspace needs to know if the HW supports this or not. Not to have duplicate frames(generated by HW and SW). Because if the HW supports this then the SW will not generate anymore frames and will expect that the HW will notify when it stopped receiving MRP frames using the function br_mrp_port_open. br_mrp_port_open - this function is used by drivers to notify the userspace via a netlink callback that one of the ports stopped receiving MRP_Test frames. This function is called only when the node has the role MRM. It is not supposed to be called from userspace. br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add, and will notify the HW that a MRP instance is added. The function gets as parameter the MRP instance. br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del, and will notify the HW that a MRP instance is removed. The function gets as parameter the ID of the MRP instance that is removed. br_mrp_port_switchdev_set_state - this corresponds to the function br_mrp_set_port_state. It would notify the HW if it should block or not non-MRP frames. br_mrp_port_switchdev_set_port - this corresponds to the function br_mrp_set_port_role. It would set the port role, primary or secondary. br_mrp_switchdev_set_role - this corresponds to the function br_mrp_set_ring_role and would set one of the role MRM or MRC. br_mrp_switchdev_set_ring_state - this corresponds to the function br_mrp_set_ring_state and would set the ring to be open or closed. br_mrp_switchdev_send_ring_test - this corresponds to the function br_mrp_start_test. This will notify the HW to start or stop generating MRP_Test frames. Value 0 for the interval parameter means to stop generating the frames. br_mrp_port_open - this function is used to notify the userspace that the port lost the continuity of MRP Test frames. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-26 16:22:02 +03:00
/* br_mrp_netlink.c */
bridge: mrp: Rename br_mrp_port_open to br_mrp_ring_port_open This patch renames the function br_mrp_port_open to br_mrp_ring_port_open. In this way is more clear that a ring port lost the continuity because there will be also a br_mrp_in_port_open. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 10:34:51 +03:00
int br_mrp_ring_port_open(struct net_device *dev, u8 loc);
bridge: mrp: Add br_mrp_in_port_open function This function notifies the userspace when the node lost the continuity of MRP_InTest frames. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14 10:34:52 +03:00
int br_mrp_in_port_open(struct net_device *dev, u8 loc);
bridge: mrp: Add MRP interface. Define the MRP interface. This interface is used by the netlink to update the MRP instances and by the MRP to make the calls to switchdev to offload it to HW. It defines an MRP instance 'struct br_mrp' which is a list of MRP instances. Which will be part of the 'struct net_bridge'. Each instance has 2 ring ports, a bridge and an ID. In case the HW can't generate MRP Test frames then the SW will generate those. br_mrp_add - adds a new MRP instance. br_mrp_del - deletes an existing MRP instance. Each instance has an ID(ring_id). br_mrp_set_port_state - changes the port state. The port can be in forwarding state, which means that the frames can pass through or in blocked state which means that the frames can't pass through except MRP frames. This will eventually call the switchdev API to notify the HW. This information is used also by the SW bridge to know how to forward frames in case the HW doesn't have this capability. br_mrp_set_port_role - a port role can be primary or secondary. This information is required to be pushed to HW in case the HW can generate MRP_Test frames. Because the MRP_Test frames contains a file with this information. Otherwise the HW will not be able to generate the frames correctly. br_mrp_set_ring_state - a ring can be in state open or closed. State open means that the mrp port stopped receiving MRP_Test frames, while closed means that the mrp port received MRP_Test frames. Similar with br_mrp_port_role, this information is pushed in HW because the MRP_Test frames contain this information. br_mrp_set_ring_role - a ring can have the following roles MRM or MRC. For the role MRM it is expected that the HW can terminate the MRP frames, notify the SW that it stopped receiving MRP_Test frames and trapp all the other MRP frames. While for MRC mode it is expected that the HW can forward the MRP frames only between the MRP ports and copy MRP_Topology frames to CPU. In case the HW doesn't support a role it needs to return an error code different than -EOPNOTSUPP. br_mrp_start_test - this starts/stops the generation of MRP_Test frames. To stop the generation of frames the interval needs to have a value of 0. In this case the userspace needs to know if the HW supports this or not. Not to have duplicate frames(generated by HW and SW). Because if the HW supports this then the SW will not generate anymore frames and will expect that the HW will notify when it stopped receiving MRP frames using the function br_mrp_port_open. br_mrp_port_open - this function is used by drivers to notify the userspace via a netlink callback that one of the ports stopped receiving MRP_Test frames. This function is called only when the node has the role MRM. It is not supposed to be called from userspace. br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add, and will notify the HW that a MRP instance is added. The function gets as parameter the MRP instance. br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del, and will notify the HW that a MRP instance is removed. The function gets as parameter the ID of the MRP instance that is removed. br_mrp_port_switchdev_set_state - this corresponds to the function br_mrp_set_port_state. It would notify the HW if it should block or not non-MRP frames. br_mrp_port_switchdev_set_port - this corresponds to the function br_mrp_set_port_role. It would set the port role, primary or secondary. br_mrp_switchdev_set_role - this corresponds to the function br_mrp_set_ring_role and would set one of the role MRM or MRC. br_mrp_switchdev_set_ring_state - this corresponds to the function br_mrp_set_ring_state and would set the ring to be open or closed. br_mrp_switchdev_send_ring_test - this corresponds to the function br_mrp_start_test. This will notify the HW to start or stop generating MRP_Test frames. Value 0 for the interval parameter means to stop generating the frames. br_mrp_port_open - this function is used to notify the userspace that the port lost the continuity of MRP Test frames. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-26 16:22:02 +03:00
net: mrp: move struct definitions out of uapi None of these are actually used in the kernel/userspace interface - there's a userspace component of implementing MRP, and userspace will need to construct certain frames to put on the wire, but there's no reason the kernel should provide the relevant definitions in a UAPI header. In fact, some of those definitions were broken until previous commit, so only keep the few that are actually referenced in the kernel code, and move them to the br_private_mrp.h header. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21 23:40:37 +03:00
/* MRP protocol data units */
struct br_mrp_tlv_hdr {
__u8 type;
__u8 length;
};
struct br_mrp_common_hdr {
__be16 seq_id;
__u8 domain[MRP_DOMAIN_UUID_LENGTH];
};
struct br_mrp_ring_test_hdr {
__be16 prio;
__u8 sa[ETH_ALEN];
__be16 port_role;
__be16 state;
__be16 transitions;
__be32 timestamp;
} __attribute__((__packed__));
struct br_mrp_in_test_hdr {
__be16 id;
__u8 sa[ETH_ALEN];
__be16 port_role;
__be16 state;
__be16 transitions;
__be32 timestamp;
} __attribute__((__packed__));
bridge: mrp: Add MRP interface. Define the MRP interface. This interface is used by the netlink to update the MRP instances and by the MRP to make the calls to switchdev to offload it to HW. It defines an MRP instance 'struct br_mrp' which is a list of MRP instances. Which will be part of the 'struct net_bridge'. Each instance has 2 ring ports, a bridge and an ID. In case the HW can't generate MRP Test frames then the SW will generate those. br_mrp_add - adds a new MRP instance. br_mrp_del - deletes an existing MRP instance. Each instance has an ID(ring_id). br_mrp_set_port_state - changes the port state. The port can be in forwarding state, which means that the frames can pass through or in blocked state which means that the frames can't pass through except MRP frames. This will eventually call the switchdev API to notify the HW. This information is used also by the SW bridge to know how to forward frames in case the HW doesn't have this capability. br_mrp_set_port_role - a port role can be primary or secondary. This information is required to be pushed to HW in case the HW can generate MRP_Test frames. Because the MRP_Test frames contains a file with this information. Otherwise the HW will not be able to generate the frames correctly. br_mrp_set_ring_state - a ring can be in state open or closed. State open means that the mrp port stopped receiving MRP_Test frames, while closed means that the mrp port received MRP_Test frames. Similar with br_mrp_port_role, this information is pushed in HW because the MRP_Test frames contain this information. br_mrp_set_ring_role - a ring can have the following roles MRM or MRC. For the role MRM it is expected that the HW can terminate the MRP frames, notify the SW that it stopped receiving MRP_Test frames and trapp all the other MRP frames. While for MRC mode it is expected that the HW can forward the MRP frames only between the MRP ports and copy MRP_Topology frames to CPU. In case the HW doesn't support a role it needs to return an error code different than -EOPNOTSUPP. br_mrp_start_test - this starts/stops the generation of MRP_Test frames. To stop the generation of frames the interval needs to have a value of 0. In this case the userspace needs to know if the HW supports this or not. Not to have duplicate frames(generated by HW and SW). Because if the HW supports this then the SW will not generate anymore frames and will expect that the HW will notify when it stopped receiving MRP frames using the function br_mrp_port_open. br_mrp_port_open - this function is used by drivers to notify the userspace via a netlink callback that one of the ports stopped receiving MRP_Test frames. This function is called only when the node has the role MRM. It is not supposed to be called from userspace. br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add, and will notify the HW that a MRP instance is added. The function gets as parameter the MRP instance. br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del, and will notify the HW that a MRP instance is removed. The function gets as parameter the ID of the MRP instance that is removed. br_mrp_port_switchdev_set_state - this corresponds to the function br_mrp_set_port_state. It would notify the HW if it should block or not non-MRP frames. br_mrp_port_switchdev_set_port - this corresponds to the function br_mrp_set_port_role. It would set the port role, primary or secondary. br_mrp_switchdev_set_role - this corresponds to the function br_mrp_set_ring_role and would set one of the role MRM or MRC. br_mrp_switchdev_set_ring_state - this corresponds to the function br_mrp_set_ring_state and would set the ring to be open or closed. br_mrp_switchdev_send_ring_test - this corresponds to the function br_mrp_start_test. This will notify the HW to start or stop generating MRP_Test frames. Value 0 for the interval parameter means to stop generating the frames. br_mrp_port_open - this function is used to notify the userspace that the port lost the continuity of MRP Test frames. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-26 16:22:02 +03:00
#endif /* _BR_PRIVATE_MRP_H */
Reference in New Issue Copy Permalink