iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/configs/shmobile_defconfig

216 lines
4.7 KiB
Plaintext
Raw Normal View History

ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
ARM: shmobile: defconfig: Enable CONFIG_CGROUPS Enable support for CONFIG_CGROUPS in shmobile_defconfig. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-10 15:17:56 +02:00
CONFIG_CGROUPS=y
ARM: shmobile: defconfig: enable initrd Enable initrd support. Signed-off-by: Kevin Hilman <khilman@linaro.org> [horms+renesas@verge.net.au: dropped enabling atag dtb compat] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-13 17:07:15 -07:00
CONFIG_BLK_DEV_INITRD=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
ARM: shmobile: Introduce ARCH_RENESAS The purpose of this patch is to start the process of replacing both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI with ARCH_RENESAS. RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas 32-bit ARM based SoCs. The name is conveniently also (newer) ARM64 based SoCs. This patches only addresses 32-bit ARM based SoCs. Proposed support for the ARM64 based r8a7795 SoC already uses ARCH_RENESAS which selects ARCH_SHMOBILE. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-10 09:06:41 +09:00
CONFIG_ARCH_RENESAS=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_PL310_ERRATA_588369=y
CONFIG_SMP=y
CONFIG_SCHED_MC=y
CONFIG_NR_CPUS=8
ARM: shmobile: Enable HIGHMEM in shmobile_defconfig Many mach-shmobile hardware platforms include support for more than 1GiB of RAM. Enable HIGHMEM by default to allow use of larger amounts of memory. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-02 18:06:24 +09:00
CONFIG_HIGHMEM=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_KEXEC=y
ARM: shmobile: defconfig: cleanup by savedefconfig Current shmobile_defconfig is not created from savedefconfig. Therefore, next defconfig patch will be unreadable. this patch tidyup this issue by below command > make shmobile_defconfig > make savedefconfig > cp defconfig ${LINUX}/arch/arm/config/shmobile_defconfig Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> [horms: Resolved conflicts; in particular leaving CONFIG_CPUFREQ_DT enabled] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-04 03:57:36 +00:00
CONFIG_CPU_FREQ=y
cpufreq: Remove CONFIG_CPU_FREQ_STAT_DETAILS config option This doesn't have any benefit apart from saving a small amount of memory when it is disabled. The ifdef hackery in the code makes it dirty unnecessarily. Clean it up by removing the Kconfig option completely. Few defconfigs are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-05 13:57:41 +05:30
CONFIG_CPU_FREQ_STAT=y
ARM: shmobile: defconfig: cleanup by savedefconfig Current shmobile_defconfig is not created from savedefconfig. Therefore, next defconfig patch will be unreadable. this patch tidyup this issue by below command > make shmobile_defconfig > make savedefconfig > cp defconfig ${LINUX}/arch/arm/config/shmobile_defconfig Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> [horms: Resolved conflicts; in particular leaving CONFIG_CPUFREQ_DT enabled] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-04 03:57:36 +00:00
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPUFREQ_DT=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_VFP=y
CONFIG_NEON=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
ARM: shmobile: defconfig: Refresh shmobile_defconfig for v4.19-rc1 Refresh the defconfig for Renesas ARM boards: - Move options that have moved, - Remove CONFIG_HAVE_ARM_ARCH_TIMER (auto-enabled), - Remove ENABLE_WARN_DEPRECATED (removed). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-28 16:56:46 +02:00
CONFIG_CMA=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
ARM: shmobile: defconfig: Enable missing support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-10 16:16:01 +01:00
CONFIG_CAN=y
CONFIG_CAN_RCAR=y
ARM: shmobile: defconfig: Refresh for v5.0-rc1 - Move SoC config options (moved in commit 062887bf5ef73313 ("ARM: shmobile: Move SoC Kconfig symbols to drivers/soc/renesas/")), - Move PCI config options (moved in commit eb01d42a77785ff9 ("PCI: consolidate PCI config entry in drivers/pci")), - Drop CONFIG_I2C_MUX=y (auto-enabled since commit ea6b13e9fed0fda9 ("drm/bridge/sii902x: Add missing dependency on I2C_MUX")), - Drop CONFIG_SH_DMAE=y (no longer selectable since commit a19788612f51b787 ("dmaengine: sh: Remove R-Mobile APE6 support")), - Drop CONFIG_ARM_UNWIND (auto-enabled since commit f9b58e8c7d031b0d ("ARM: 8800/1: use choice for kernel unwinders")). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-18 16:59:38 +01:00
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCIE_RCAR=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: shmobile: Enable kzm9g board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-09 14:13:55 +01:00
CONFIG_SIMPLE_PM_BUS=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_MTD=y
ARM: shmobile: defconfig: add MTD_BLOCK MTD_BLOOK is needed for accessing to SPI-FLASH Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reported-by: Cao Minh Hiep <cm-hiep@jinso.co.jp> Reported-by: Bui Duc Phuc ( Fukuda ) <bd-phuc@jinso.co.jp> Reported-by: Nguyen Xuan Nui <nx-nui@jinso.co.jp> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-04 03:57:50 +00:00
CONFIG_MTD_BLOCK=y
ARM: shmobile: defconfig: Enable support for CFI NOR FLASH Enable the config options needed to access the CFI NOR FLASH on the APE6EVM board. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-01 14:01:49 +02:00
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
ARM: shmobile: shmobile_defconfig: Enable missing hardware support Based on the DTSes Notes: - MTD_SPI_NOR is a dependency for MTD_M25P80 since commit 03e296f613affcc2671c1e86d8c25ecad867204e ("mtd: m25p80: use the SPI nor framework") and commit e43b20619bdb6c851dd7b49cbd15e52875a785d4 ("mtd: spi-nor: shorten Kconfig naming"), - I2C_RIIC was enabled in the old genmai_defconfig. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-14 18:57:22 +02:00
CONFIG_MTD_SPI_NOR=y
ARM: shmobile: Include at24.c in shmobile_defconfig The Koelsch board includes an at24-compatible EEPROM hooked up via I2C. To increase hardware support enable the driver in the shmobile_defconfig multiplatform configuration. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-03-26 14:19:11 +09:00
CONFIG_EEPROM_AT24=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_SATA_RCAR=y
CONFIG_NETDEVICES=y
CONFIG_SH_ETH=y
ARM: shmobile: defconfig: Enable Ethernet AVB The iWave RZ/G1M Q7 SOM supports Gigabit Ethernet Phy (Micrel KSZ9031MNX). Gigabit Ethernet support is available in Renesas AVB driver. To increase hardware support enable the driver in the shmobile_defconfig multiplatform configuration. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-05 16:56:29 +01:00
CONFIG_RAVB=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_SMSC911X=y
ARM: shmobile: Enable MICREL_PHY in shmobile_defconfig commit 1c9106cb783cd227 ("ARM: shmobile: lager-reference: DTS-only board support"), dropped the MACH_LAGER Kconfig section, which did "select MICREL_PHY if SH_ETH". Hence we now have to enable MICREL_PHY explicitly in shmobile_defconfig. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-08 12:35:24 +01:00
CONFIG_MICREL_PHY=y
ARM: shmobile: defconfig: Refresh - Several options were moved, - INPUT_MOUSEDEV_PSAUX is no longer enabled by default since commit 73d8ef76006b649f ("Input: mousedev - stop offering PS/2 to userspace by default"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-10 15:28:19 +02:00
CONFIG_SMSC_PHY=y
ARM: shmobile: Enable kzm9g board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-09 14:13:55 +01:00
CONFIG_INPUT_EVDEV=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
ARM: shmobile: Enable Armadillo 800 EVA board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-28 14:40:22 +02:00
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ST1232=y
ARM: shmobile: Enable kzm9g board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-09 14:13:55 +01:00
CONFIG_INPUT_MISC=y
CONFIG_INPUT_ADXL34X=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
ARM: shmobile: defconfig: Enable support for RZN1D-DB Enable support for the Renesas RZN1D-DB Board: - RZ/N1D (R9A06G032) base SoC support, - Synopsys DesignWare 8250 serial port support. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-07-04 13:43:31 +02:00
CONFIG_SERIAL_8250_DW=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_SH_SCI=y
ARM: shmobile: Enable kzm9g board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-09 14:13:55 +01:00
CONFIG_I2C_CHARDEV=y
ARM: shmobile: defconfig: enable I2C demultiplexer and slave eeprom The Lager board shall be the reference platform for the runtime I2C IP core switcher and for I2C slave support. Enable the needed drivers for this. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-15 13:57:48 +01:00
CONFIG_I2C_DEMUX_PINCTRL=y
ARM: shmobile: defconfig: Enable missing support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-10 16:16:01 +01:00
CONFIG_I2C_EMEV2=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_I2C_GPIO=y
ARM: shmobile: shmobile_defconfig: Enable missing hardware support Based on the DTSes Notes: - MTD_SPI_NOR is a dependency for MTD_M25P80 since commit 03e296f613affcc2671c1e86d8c25ecad867204e ("mtd: m25p80: use the SPI nor framework") and commit e43b20619bdb6c851dd7b49cbd15e52875a785d4 ("mtd: spi-nor: shorten Kconfig naming"), - I2C_RIIC was enabled in the old genmai_defconfig. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-14 18:57:22 +02:00
CONFIG_I2C_RIIC=y
ARM: shmobile: Include i2c-shmobile.c in shmobile_defconfig Many SoCs include I2C controller instances compatible with the i2c-shmobile.c driver. To increase hardware support enable the driver in the shmobile_defconfig multiplatform configuration. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-03-26 14:16:19 +09:00
CONFIG_I2C_SH_MOBILE=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_I2C_RCAR=y
ARM: shmobile: defconfig: enable I2C demultiplexer and slave eeprom The Lager board shall be the reference platform for the runtime I2C IP core switcher and for I2C slave support. Enable the needed drivers for this. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-15 13:57:48 +01:00
CONFIG_I2C_SLAVE_EEPROM=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_SPI=y
CONFIG_SPI_RSPI=y
ARM: shmobile: multiplatform: Enable MSIOF in defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-25 11:30:19 +01:00
CONFIG_SPI_SH_MSIOF=y
ARM: shmobile: marzen: Add to shmobile defconfig Add marzen to shmobile defconfig now that it supports multiplatform Also enable SH_HSPI which is used by marzen. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-16 09:04:13 +09:00
CONFIG_SPI_SH_HSPI=y
ARM: shmobile: Enable RZA1 pin controller Enable PINCTRL_RZA1 option in shmobile_defconfig Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-09 18:34:18 +01:00
CONFIG_PINCTRL_RZA1=y
ARM: shmobile: defconfig: Enable support for RZ/A2 Enable support for the RZ/A2 SoC, including pin control, now the DTS for the Renesas RZ/A2M evaluation board is included. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-24 17:40:21 +01:00
CONFIG_PINCTRL_RZA2=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_GPIO_EM=y
CONFIG_GPIO_RCAR=y
ARM: shmobile: Enable kzm9g board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-09 14:13:55 +01:00
CONFIG_GPIO_PCF857X=y
ARM: shmobile: Enable R-Mobile reset driver in multiplatform defconfig This is used on R-Mobile APE6 (r8a73a4), R-Mobile A1 (r8a7740), and SH-Mobile AG5 (sh73a0). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-23 16:59:27 +01:00
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_RMOBILE=y
ARM: shmobile: defconfig: Refresh - Several options were moved, - INPUT_MOUSEDEV_PSAUX is no longer enabled by default since commit 73d8ef76006b649f ("Input: mousedev - stop offering PS/2 to userspace by default"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-10 15:28:19 +02:00
CONFIG_POWER_SUPPLY=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
ARM: shmobile: defconfig: cleanup by savedefconfig Current shmobile_defconfig is not created from savedefconfig. Therefore, next defconfig patch will be unreadable. this patch tidyup this issue by below command > make shmobile_defconfig > make savedefconfig > cp defconfig ${LINUX}/arch/arm/config/shmobile_defconfig Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> [horms: Resolved conflicts; in particular leaving CONFIG_CPUFREQ_DT enabled] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-04 03:57:36 +00:00
CONFIG_CPU_THERMAL=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_RCAR_THERMAL=y
ARM: shmobile: Enable DA9063 watchdog in multiplatform defconfig This allows to restart koelsch on watchdog timeout or manual system restart request. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-09 12:22:49 +01:00
CONFIG_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=y
ARM: shmobile: defconfig: Enable RENESAS_WDT_GEN R-Car Gen2 and RZ/G1 platforms come with a watchdog IP, therefore enable its driver by default. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12 17:44:23 +00:00
CONFIG_RENESAS_WDT=y
ARM: shmobile: Enable kzm9g board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-09 14:13:55 +01:00
CONFIG_MFD_AS3711=y
ARM: shmobile: Enable DA9063 watchdog in multiplatform defconfig This allows to restart koelsch on watchdog timeout or manual system restart request. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-09 12:22:49 +01:00
CONFIG_MFD_DA9063=y
ARM: shmobile: Enable fixed voltage regulator in shmobile_defconfig This is selected by MACH_MARZEN which is enabled in shmobile_defconfig, however, MACH_MARZEN is going away along with the board code it enables. Acked-by: Magnus Damm <damm@opensource.se> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-07-15 15:42:35 +09:00
CONFIG_REGULATOR_FIXED_VOLTAGE=y
ARM: shmobile: Enable kzm9g board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-09 14:13:55 +01:00
CONFIG_REGULATOR_AS3711=y
ARM: shmobile: defconfig: cleanup by savedefconfig Current shmobile_defconfig is not created from savedefconfig. Therefore, next defconfig patch will be unreadable. this patch tidyup this issue by below command > make shmobile_defconfig > make savedefconfig > cp defconfig ${LINUX}/arch/arm/config/shmobile_defconfig Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> [horms: Resolved conflicts; in particular leaving CONFIG_CPUFREQ_DT enabled] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-12-04 03:57:36 +00:00
CONFIG_REGULATOR_DA9210=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_REGULATOR_GPIO=y
ARM: shmobile: Enable ape6evm board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-20 14:08:13 +01:00
CONFIG_REGULATOR_MAX8973=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
ARM: shmobile: Enable VSP1 in shmobile_defconfig Both r8a7790 and r8a7791 have multiple on-chip VSP1 devices, so enable the VSP1 driver by default in the shmobile_defconfig. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-08 21:37:58 +09:00
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_RCAR_VIN=y
ARM: shmobile: Enable VSP1 in shmobile_defconfig Both r8a7790 and r8a7791 have multiple on-chip VSP1 devices, so enable the VSP1 driver by default in the shmobile_defconfig. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-08 21:37:58 +09:00
CONFIG_V4L_MEM2MEM_DRIVERS=y
ARM: shmobile: defconfig: Enable VIDEO_RENESAS_FDP1 R-Car Gen2 (and RZ/G1) SoCs have a Fine Display Processor, hence enable support for it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-31 11:16:17 +02:00
CONFIG_VIDEO_RENESAS_FDP1=y
ARM: shmobile: defconfig: Enable missing support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-10 16:16:01 +01:00
CONFIG_VIDEO_RENESAS_JPU=y
ARM: shmobile: Enable VSP1 in shmobile_defconfig Both r8a7790 and r8a7791 have multiple on-chip VSP1 devices, so enable the VSP1 driver by default in the shmobile_defconfig. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-08 21:37:58 +09:00
CONFIG_VIDEO_RENESAS_VSP1=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_ADV7180=y
ARM: shmobile: defconfig: Enable CONFIG_VIDEO_ADV7604 The adv7612 is used on Gen2 boards (Lager, Koelsch and Gose) for HDMI input. Enable support for this chip in shmobile_defconfig. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-18 16:00:44 +01:00
CONFIG_VIDEO_ADV7604=y
ARM: shmobile: Enable bockw board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-04 13:14:20 +01:00
CONFIG_VIDEO_ML86V7667=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_DRM=y
CONFIG_DRM_RCAR_DU=y
ARM: shmobile: defconfig: Replace DRM_RCAR_HDMI by generic bridge options The manual bridge implementation was removed in favor of the generic one, so now we need to enable standard bridge drivers like DRM_DUMB_VGA_DAC and DRM_I2C_ADV7511. DRM_I2C_ADV7511 was already enabled, but the (newer) audio part wasn't. Fixes: 5c602531feb3db39 ("drm: rcar-du: Replace manual bridge implementation with DRM bridge") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-10 15:28:17 +02:00
CONFIG_DRM_DUMB_VGA_DAC=y
ARM: shmobile: defconfig: Enable SII902X The iwg23s board comes with the SiI9022ACNU HDMI transmitter, this patch makes sure the corresponding driver gets built. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-09-21 19:08:31 +01:00
CONFIG_DRM_SII902X=y
ARM: shmobile: defconfig: Replace DRM_RCAR_HDMI by generic bridge options The manual bridge implementation was removed in favor of the generic one, so now we need to enable standard bridge drivers like DRM_DUMB_VGA_DAC and DRM_I2C_ADV7511. DRM_I2C_ADV7511 was already enabled, but the (newer) audio part wasn't. Fixes: 5c602531feb3db39 ("drm: rcar-du: Replace manual bridge implementation with DRM bridge") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-10 15:28:17 +02:00
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_AUDIO=y
ARM: shmobile: Enable kzm9g board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-09 14:13:55 +01:00
CONFIG_FB_SH_MOBILE_LCDC=y
ARM: shmobile: Enable Armadillo 800 EVA board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-28 14:40:22 +02:00
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
ARM: shmobile: Enable kzm9g board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-09 14:13:55 +01:00
CONFIG_BACKLIGHT_AS3711=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
ARM: shmobile: Enable Armadillo 800 EVA board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-28 14:40:22 +02:00
CONFIG_SND_SOC_SH4_FSI=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_SND_SOC_RCAR=y
ARM: shmobile: multiplatform: add AK4642 support on defconfig AK4642 is well used audio codec on Renesas reference board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-03 17:50:24 -08:00
CONFIG_SND_SOC_AK4642=y
ARM: shmobile: defconfig: Enable SGTL5000 audio codec The iWave RZ/G1M Q7 carrier board supports I2S audio codec "SGTL5000". To increase hardware support enable the driver in the shmobile_defconfig multiplatform configuration. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-12 18:25:07 +00:00
CONFIG_SND_SOC_SGTL5000=y
ARM: shmobile: Enable Armadillo 800 EVA board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-28 14:40:22 +02:00
CONFIG_SND_SOC_WM8978=y
ARM: shmobile: Enable USBHS gadget support in shmobile_defconfig The renesas_usbhs driver provides USB gadget support for most Renesas platforms. To increase hardware support enable the driver in the shmobile_defconfig multiplatform configuration. Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-03-28 17:54:01 +01:00
CONFIG_USB=y
ARM: shmobile: enable XHCI_RCAR in defconfig Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-01-11 12:59:59 +09:00
CONFIG_USB_XHCI_HCD=y
ARM: shmobile: defconfig: Replace USB_XHCI_RCAR by USB_XHCI_PLATFORM USB_XHCI_RCAR is no longer enabled, as it now has a dependency on USB_XHCI_PLATFORM, instead of selecting USB_XHCI_PLATFORM. As the latter selects the former if ARCH_RENESAS, fix this by replacing USB_XHCI_RCAR by USB_XHCI_PLATFORM in shmobile_defconfig. Fixes: f879fc32aa0c96fb ("usb: host: xhci-rcar: Avoid long wait in xhci_reset()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-10 15:28:15 +02:00
CONFIG_USB_XHCI_PLATFORM=y
ARM: shmobile: Enable USB [EO]HCI HCD support in shmobile_defconfig The USB [EO]HCI HCD drivers provide USB host support for Renesas R-Car Gen2 platforms. To increase hardware support enable the driver in the shmobile_defconfig multiplatform configuration. Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-10 16:12:45 +09:00
CONFIG_USB_EHCI_HCD=y
ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in shmobile_defconfig The USB [EO]HCI controller on RZ/G1C SoC doesn't have PCI bridge like other R-Car Gen2 devices. So enable generic USB [EO]HCI HCD PLATFORM support in shmobile_defconfig. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-10 15:48:44 +01:00
CONFIG_USB_EHCI_HCD_PLATFORM=y
ARM: shmobile: Enable USB [EO]HCI HCD support in shmobile_defconfig The USB [EO]HCI HCD drivers provide USB host support for Renesas R-Car Gen2 platforms. To increase hardware support enable the driver in the shmobile_defconfig multiplatform configuration. Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-04-10 16:12:45 +09:00
CONFIG_USB_OHCI_HCD=y
ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in shmobile_defconfig The USB [EO]HCI controller on RZ/G1C SoC doesn't have PCI bridge like other R-Car Gen2 devices. So enable generic USB [EO]HCI HCD PLATFORM support in shmobile_defconfig. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-10 15:48:44 +01:00
CONFIG_USB_OHCI_HCD_PLATFORM=y
ARM: shmobile: Enable kzm9g board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-09 14:13:55 +01:00
CONFIG_USB_R8A66597_HCD=y
ARM: shmobile: Enable USBHS gadget support in shmobile_defconfig The renesas_usbhs driver provides USB gadget support for most Renesas platforms. To increase hardware support enable the driver in the shmobile_defconfig multiplatform configuration. Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-03-28 17:54:01 +01:00
CONFIG_USB_RENESAS_USBHS=y
CONFIG_USB_GADGET=y
CONFIG_USB_RENESAS_USBHS_UDC=y
ARM: shmobile: marzen: Add to shmobile defconfig Add marzen to shmobile defconfig now that it supports multiplatform Also enable SH_HSPI which is used by marzen. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-16 09:04:13 +09:00
CONFIG_USB_ETH=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_MMC=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_RTC_CLASS=y
ARM: shmobile: Enable kzm9g board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-09 14:13:55 +01:00
CONFIG_RTC_DRV_RS5C372=y
ARM: shmobile: Enable NXP pcf85363 rtc in shmobile_defconfig The iWave RZ/G1C SBC supports RTC (NXP pcf85263). To increase hardware support enable the driver in the shmobile_defconfig multiplatform configuration. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-07 11:27:45 +00:00
CONFIG_RTC_DRV_PCF85363=y
ARM: shmobile: Enable BQ32000 rtc in shmobile_defconfig The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000). To increase hardware support enable the driver in the shmobile_defconfig multiplatform configuration. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-08-08 14:04:25 +01:00
CONFIG_RTC_DRV_BQ32K=y
ARM: shmobile: Enable Armadillo 800 EVA board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-28 14:40:22 +02:00
CONFIG_RTC_DRV_S35390A=y
ARM: shmobile: Enable bockw board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-04 13:14:20 +01:00
CONFIG_RTC_DRV_RX8581=y
ARM: shmobile: defconfig: Enable missing support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-10 16:16:01 +01:00
CONFIG_RTC_DRV_DA9063=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
CONFIG_DMADEVICES=y
ARM: shmobile: multiplatform: add R-Car DMAC support on defconfig Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-03 17:50:00 -08:00
CONFIG_RCAR_DMAC=y
ARM: shmobile: defconfig: Enable missing support based on DTSes Enable all missing support, extracted from the various Renesas ARM DTSes using linux-config-from-dt. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-10 16:16:01 +01:00
CONFIG_RENESAS_USB_DMAC=y
ARM: shmobile: defconfig: Enable frame buffer console for armadillo800eva Enabling the frame buffer device on armadillo800eva requires the board staging code. Also enable the frame buffer, so you will actually see output during boot. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-10 16:16:02 +01:00
CONFIG_STAGING=y
CONFIG_STAGING_BOARD=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
# CONFIG_IOMMU_SUPPORT is not set
ARM: shmobile: defconfig: Refresh for v5.0-rc1 - Move SoC config options (moved in commit 062887bf5ef73313 ("ARM: shmobile: Move SoC Kconfig symbols to drivers/soc/renesas/")), - Move PCI config options (moved in commit eb01d42a77785ff9 ("PCI: consolidate PCI config entry in drivers/pci")), - Drop CONFIG_I2C_MUX=y (auto-enabled since commit ea6b13e9fed0fda9 ("drm/bridge/sii902x: Add missing dependency on I2C_MUX")), - Drop CONFIG_SH_DMAE=y (no longer selectable since commit a19788612f51b787 ("dmaengine: sh: Remove R-Mobile APE6 support")), - Drop CONFIG_ARM_UNWIND (auto-enabled since commit f9b58e8c7d031b0d ("ARM: 8800/1: use choice for kernel unwinders")). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-18 16:59:38 +01:00
CONFIG_ARCH_EMEV2=y
CONFIG_ARCH_R7S72100=y
ARM: shmobile: defconfig: Enable support for RZ/A2 Enable support for the RZ/A2 SoC, including pin control, now the DTS for the Renesas RZ/A2M evaluation board is included. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-24 17:40:21 +01:00
CONFIG_ARCH_R7S9210=y
ARM: shmobile: defconfig: Refresh for v5.0-rc1 - Move SoC config options (moved in commit 062887bf5ef73313 ("ARM: shmobile: Move SoC Kconfig symbols to drivers/soc/renesas/")), - Move PCI config options (moved in commit eb01d42a77785ff9 ("PCI: consolidate PCI config entry in drivers/pci")), - Drop CONFIG_I2C_MUX=y (auto-enabled since commit ea6b13e9fed0fda9 ("drm/bridge/sii902x: Add missing dependency on I2C_MUX")), - Drop CONFIG_SH_DMAE=y (no longer selectable since commit a19788612f51b787 ("dmaengine: sh: Remove R-Mobile APE6 support")), - Drop CONFIG_ARM_UNWIND (auto-enabled since commit f9b58e8c7d031b0d ("ARM: 8800/1: use choice for kernel unwinders")). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-18 16:59:38 +01:00
CONFIG_ARCH_R8A73A4=y
CONFIG_ARCH_R8A7740=y
CONFIG_ARCH_R8A7743=y
CONFIG_ARCH_R8A7744=y
CONFIG_ARCH_R8A7745=y
CONFIG_ARCH_R8A77470=y
CONFIG_ARCH_R8A7778=y
CONFIG_ARCH_R8A7779=y
CONFIG_ARCH_R8A7790=y
CONFIG_ARCH_R8A7791=y
CONFIG_ARCH_R8A7792=y
CONFIG_ARCH_R8A7793=y
CONFIG_ARCH_R8A7794=y
CONFIG_ARCH_R9A06G032=y
CONFIG_ARCH_SH73A0=y
ARM: shmobile: Enable kzm9g board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-09 14:13:55 +01:00
CONFIG_IIO=y
CONFIG_AK8975=y
ARM: shmobile: Enable Armadillo 800 EVA board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-28 14:40:22 +02:00
CONFIG_PWM=y
ARM: shmobile: defconfig: Enable PWM RZ/G1 and R-Car platforms have PWM timers. This patch enables PWM support by default. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-12-19 13:34:56 +00:00
CONFIG_PWM_RCAR=y
ARM: shmobile: Enable Armadillo 800 EVA board in multiplatform defconfig Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-28 14:40:22 +02:00
CONFIG_PWM_RENESAS_TPU=y
ARM: shmobile: defconfig: Enable reset controller support R-Car Gen2 and RZ/G1 SoCs can make use of the optional reset controller support in the Renesas CPG/MSSR driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-07-04 13:43:30 +02:00
CONFIG_RESET_CONTROLLER=y
ARM: shmobile: defconfig: Replace USB_RCAR_GEN2_PHY by PHY_RCAR_GEN2 The legacy-only USB_RCAR_GEN2_PHY driver was replaced by the DT-only PHY_RCAR_GEN2 driver. Refresh the defconfig using "make savedefconfig" while we're at it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-04-28 14:08:03 +02:00
CONFIG_PHY_RCAR_GEN2=y
ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig so that boards based on RZ/G1C SoC design can use the corresponding driver. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-10 15:48:42 +01:00
CONFIG_PHY_RCAR_GEN3_USB2=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
# CONFIG_DNOTIFY is not set
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
ARM: shmobile: defconfig: Refresh for v5.1-rc1 Update the defconfig for Renesas ARM boards: - Move CMA-related config options (moved in commit ddb26d8e1e97af23 ("dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig"), - Drop CONFIG_DRM_RCAR_LVDS=y (auto-enabled since commit 02f2b30032c12b1b ("drm: rcar-du: lvds: Add API to enable/disable clock output")), - Drop CONFIG_SND_SIMPLE_SCU_CARD=y (removed in commit c8ed6aca6b824018 ("ASoC: simple-scu-card: remove simple-scu-card")). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-01 13:56:25 +02:00
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=64
ARM: shmobile: defconfig: Enable CONFIG_PRINTK_TIME Enable timestamps for kernel log output to improve debugging. You can always use "dmesg -t" to strip the timestamps. Don't specify CONFIG_LOG_BUF_SHIFT=16 while we're at it. There's a reason the default in Kconfig is higher ;-) Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-30 14:35:34 +01:00
CONFIG_PRINTK_TIME=y
ARM: shmobile: Add defconfig for shmobile multiplatform This is intended to be a base for a defconfig to cover all shmobile multiplatform boards. It currently includes configuration for the following boards: * KZM9D * Lager * Koelsch Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2014-02-14 09:15:54 +09:00
# CONFIG_ENABLE_MUST_CHECK is not set
ARM: shmobile: defconfig: Disable CONFIG_EMBEDDED CONFIG_EXPERT exposes too many config options that do not matter for development. E.g. it prohibits using the default values for the various SH_SCI options. However, CONFIG_EMBEDDED selects CONFIG_EXPERT, so it cannot be disabled. Hence disable CONFIG_EMBEDDED, and compensate for the loss of CONFIG_DEBUG_KERNEL by enabling the latter. Actual impact, all harmless: - CONFIG_NAMESPACES=y (plus a few related CONFIG_*_NS options), - CONFIG_SYSCTL_SYSCALL=n, - CONFIG_SERIAL_SH_SCI_NR_UARTS changed from 20 to 18, - Some HID support became enabled, - CONFIG_DEBUG_MEMORY_INIT=y, Refresh the result. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-02 13:27:46 +01:00
CONFIG_DEBUG_KERNEL=y
Reference in New Issue Copy Permalink