iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/sound/soc/imx/Kconfig

40 lines
1.1 KiB
Plaintext
Raw Normal View History

ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 16:41:04 +01:00
config SND_IMX_SOC
ASoC: Typo. s/Freecale/Freescale/ Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-09 11:42:27 +01:00
tristate "SoC Audio for Freescale i.MX CPUs"
ASoC: Remove BROKEN from i.MX audio after dependencies merged Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-02-12 14:39:36 +00:00
depends on ARCH_MXC
ASoC: add DMA platform driver for MX1x and MX2x This adds support for DMA platform valid for i.MX1 and i.MX2 platforms. This is not valid for i.MX3 since it doesn't share the same DMA interface than i.MX1 and i.MX2. It has been tested on i.MX27 board. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-04 17:17:52 +02:00
select SND_PCM
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 16:41:04 +01:00
select FIQ
select SND_SOC_AC97_BUS
ASoC: add DMA platform driver for MX1x and MX2x This adds support for DMA platform valid for i.MX1 and i.MX2 platforms. This is not valid for i.MX3 since it doesn't share the same DMA interface than i.MX1 and i.MX2. It has been tested on i.MX27 board. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-04 17:17:52 +02:00
help
Say Y or M if you want to add support for codecs attached to
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 16:41:04 +01:00
the i.MX SSI interface.
ASoC: add DMA platform driver for MX1x and MX2x This adds support for DMA platform valid for i.MX1 and i.MX2 platforms. This is not valid for i.MX3 since it doesn't share the same DMA interface than i.MX1 and i.MX2. It has been tested on i.MX27 board. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-04 17:17:52 +02:00
ASoC: add DAI platform ssi driver for MXC This adds support for DAI platform for the SSI present in MXC platforms. It currently does not support i.MX3, the only thing necessary to do this is to export DMA data for i.MX3 interface which I haven't done because I don't have a i.MX3 based board available. It has been tested on i.MX27 board. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-05 08:47:48 +02:00
config SND_MXC_SOC_SSI
tristate
ASoC: add DMA platform driver for MX1x and MX2x This adds support for DMA platform valid for i.MX1 and i.MX2 platforms. This is not valid for i.MX3 since it doesn't share the same DMA interface than i.MX1 and i.MX2. It has been tested on i.MX27 board. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-04 17:17:52 +02:00
ASoC: Wolfson Microelectronics 1133-EV1 audio support Initial support for audio using the 1133-EV1 audio and PMIC module for the i.MX31ADS. Currently only playback is supported, and the FIQ DMA driver has performance problems at higher sample rates which cause audible dropouts. This driver is based heavily on an out of tree one written by Liam Girdwood. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-23 11:15:34 +00:00
config SND_MXC_SOC_WM1133_EV1
tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
ASoC: MX31ads sound support should depend on MACH_MX31ADS_WM1133_EV1 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-05-31 14:19:50 +02:00
depends on SND_IMX_SOC && MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
ASoC: Wolfson Microelectronics 1133-EV1 audio support Initial support for audio using the 1133-EV1 audio and PMIC module for the i.MX31ADS. Currently only playback is supported, and the FIQ DMA driver has performance problems at higher sample rates which cause audible dropouts. This driver is based heavily on an out of tree one written by Liam Girdwood. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-23 11:15:34 +00:00
select SND_SOC_WM8350
select SND_MXC_SOC_SSI
help
Enable support for audio on the i.MX31ADS with the WM1133-EV1
PMIC board with WM8835x fitted.
ASoC: Add missing Kconfig entry for Phytec boards Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-05-31 10:49:54 +02:00
config SND_SOC_PHYCORE_AC97
tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
depends on MACH_PCM043 || MACH_PCA100
select SND_MXC_SOC_SSI
select SND_SOC_WM9712
help
Say Y if you want to add support for SoC audio on Phytec phyCORE
and phyCARD boards in AC97 mode
ASoC: imx: add eukrea-tlv320 Add the necessary files to support the TLV320AIC23B wired in I2S on our i.MX platforms. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-27 10:58:55 +02:00
config SND_SOC_EUKREA_TLV320
bool "Eukrea TLV320"
ASoC: eukrea-tlv320: add support for our i.MX25 board * tdm slot has to be configured to get sound working on i.MX25 Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-06-17 15:44:01 +02:00
depends on MACH_EUKREA_MBIMX27_BASEBOARD || MACH_EUKREA_MBIMXSD_BASEBOARD
ASoC: imx: add eukrea-tlv320 Add the necessary files to support the TLV320AIC23B wired in I2S on our i.MX platforms. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-27 10:58:55 +02:00
select SND_IMX_SOC
select SND_SOC_TLV320AIC23
help
Enable I2S based access to the TLV320AIC23B codec attached
to the SSI4 interface
Reference in New Issue Copy Permalink