2010-04-02 20:48:03 +04:00
/*
* Kernel Debug Core
*
* Maintainer : Jason Wessel < jason . wessel @ windriver . com >
*
* Copyright ( C ) 2000 - 2001 VERITAS Software Corporation .
* Copyright ( C ) 2002 - 2004 Timesys Corporation
* Copyright ( C ) 2003 - 2004 Amit S . Kale < amitkale @ linsyssoft . com >
2010-07-18 16:27:13 +04:00
* Copyright ( C ) 2004 Pavel Machek < pavel @ ucw . cz >
2010-04-02 20:48:03 +04:00
* Copyright ( C ) 2004 - 2006 Tom Rini < trini @ kernel . crashing . org >
* Copyright ( C ) 2004 - 2006 LinSysSoft Technologies Pvt . Ltd .
* Copyright ( C ) 2005 - 2009 Wind River Systems , Inc .
* Copyright ( C ) 2007 MontaVista Software , Inc .
* Copyright ( C ) 2008 Red Hat , Inc . , Ingo Molnar < mingo @ redhat . com >
*
* Contributors at various stages not listed above :
* Jason Wessel ( jason . wessel @ windriver . com )
* George Anzinger < george @ mvista . com >
* Anurekh Saxena ( anurekh . saxena @ timesys . com )
* Lake Stevens Instrument Division ( Glenn Engel )
* Jim Kingdon , Cygnus Support .
*
* Original KGDB stub : David Grothe < dave @ gcom . com > ,
* Tigran Aivazian < tigran @ sco . com >
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed " as is " without any warranty of any
* kind , whether express or implied .
*/
# include <linux/kernel.h>
2017-02-08 20:51:30 +03:00
# include <linux/sched/signal.h>
2010-04-02 20:48:03 +04:00
# include <linux/kgdb.h>
2010-05-21 06:04:22 +04:00
# include <linux/kdb.h>
2013-02-05 03:35:26 +04:00
# include <linux/serial_core.h>
2010-04-02 20:48:03 +04:00
# include <linux/reboot.h>
# include <linux/uaccess.h>
# include <asm/cacheflush.h>
# include <asm/unaligned.h>
# include "debug_core.h"
# define KGDB_MAX_THREAD_QUERY 17
/* Our I/O buffers. */
static char remcom_in_buffer [ BUFMAX ] ;
static char remcom_out_buffer [ BUFMAX ] ;
2011-05-23 22:17:41 +04:00
static int gdbstub_use_prev_in_buf ;
static int gdbstub_prev_in_buf_pos ;
2010-04-02 20:48:03 +04:00
/* Storage for the registers, in GDB format. */
static unsigned long gdb_regs [ ( NUMREGBYTES +
sizeof ( unsigned long ) - 1 ) /
sizeof ( unsigned long ) ] ;
/*
* GDB remote protocol parser :
*/
2010-05-21 06:04:22 +04:00
# ifdef CONFIG_KGDB_KDB
static int gdbstub_read_wait ( void )
{
int ret = - 1 ;
int i ;
2011-05-23 22:17:41 +04:00
if ( unlikely ( gdbstub_use_prev_in_buf ) ) {
if ( gdbstub_prev_in_buf_pos < gdbstub_use_prev_in_buf )
return remcom_in_buffer [ gdbstub_prev_in_buf_pos + + ] ;
else
gdbstub_use_prev_in_buf = 0 ;
}
2010-05-21 06:04:22 +04:00
/* poll any additional I/O interfaces that are defined */
while ( ret < 0 )
for ( i = 0 ; kdb_poll_funcs [ i ] ! = NULL ; i + + ) {
ret = kdb_poll_funcs [ i ] ( ) ;
if ( ret > 0 )
break ;
}
return ret ;
}
# else
static int gdbstub_read_wait ( void )
{
int ret = dbg_io_ops - > read_char ( ) ;
while ( ret = = NO_POLL_CHAR )
ret = dbg_io_ops - > read_char ( ) ;
return ret ;
}
# endif
2010-04-02 20:48:03 +04:00
/* scan for the sequence $<data>#<checksum> */
static void get_packet ( char * buffer )
{
unsigned char checksum ;
unsigned char xmitcsum ;
int count ;
char ch ;
do {
/*
* Spin and wait around for the start character , ignore all
* other characters :
*/
2010-05-21 06:04:22 +04:00
while ( ( ch = ( gdbstub_read_wait ( ) ) ) ! = ' $ ' )
2010-04-02 20:48:03 +04:00
/* nothing */ ;
kgdb_connected = 1 ;
checksum = 0 ;
xmitcsum = - 1 ;
count = 0 ;
/*
* now , read until a # or end of buffer is found :
*/
while ( count < ( BUFMAX - 1 ) ) {
2010-05-21 06:04:22 +04:00
ch = gdbstub_read_wait ( ) ;
2010-04-02 20:48:03 +04:00
if ( ch = = ' # ' )
break ;
checksum = checksum + ch ;
buffer [ count ] = ch ;
count = count + 1 ;
}
if ( ch = = ' # ' ) {
2010-08-05 18:22:19 +04:00
xmitcsum = hex_to_bin ( gdbstub_read_wait ( ) ) < < 4 ;
xmitcsum + = hex_to_bin ( gdbstub_read_wait ( ) ) ;
2010-04-02 20:48:03 +04:00
if ( checksum ! = xmitcsum )
/* failed checksum */
dbg_io_ops - > write_char ( ' - ' ) ;
else
/* successful transfer */
dbg_io_ops - > write_char ( ' + ' ) ;
if ( dbg_io_ops - > flush )
dbg_io_ops - > flush ( ) ;
}
2011-05-23 22:17:41 +04:00
buffer [ count ] = 0 ;
2010-04-02 20:48:03 +04:00
} while ( checksum ! = xmitcsum ) ;
}
/*
* Send the packet in buffer .
* Check for gdb connection if asked for .
*/
static void put_packet ( char * buffer )
{
unsigned char checksum ;
int count ;
char ch ;
/*
* $ < packet info > # < checksum > .
*/
while ( 1 ) {
dbg_io_ops - > write_char ( ' $ ' ) ;
checksum = 0 ;
count = 0 ;
while ( ( ch = buffer [ count ] ) ) {
dbg_io_ops - > write_char ( ch ) ;
checksum + = ch ;
count + + ;
}
dbg_io_ops - > write_char ( ' # ' ) ;
dbg_io_ops - > write_char ( hex_asc_hi ( checksum ) ) ;
dbg_io_ops - > write_char ( hex_asc_lo ( checksum ) ) ;
if ( dbg_io_ops - > flush )
dbg_io_ops - > flush ( ) ;
/* Now see what we get in reply. */
2010-05-21 06:04:22 +04:00
ch = gdbstub_read_wait ( ) ;
2010-04-02 20:48:03 +04:00
if ( ch = = 3 )
2010-05-21 06:04:22 +04:00
ch = gdbstub_read_wait ( ) ;
2010-04-02 20:48:03 +04:00
/* If we get an ACK, we are done. */
if ( ch = = ' + ' )
return ;
/*
* If we get the start of another packet , this means
* that GDB is attempting to reconnect . We will NAK
* the packet being sent , and stop trying to send this
* packet .
*/
if ( ch = = ' $ ' ) {
dbg_io_ops - > write_char ( ' - ' ) ;
if ( dbg_io_ops - > flush )
dbg_io_ops - > flush ( ) ;
return ;
}
}
}
static char gdbmsgbuf [ BUFMAX + 1 ] ;
void gdbstub_msg_write ( const char * s , int len )
{
char * bufptr ;
int wcount ;
int i ;
2010-05-21 06:04:24 +04:00
if ( len = = 0 )
len = strlen ( s ) ;
2010-04-02 20:48:03 +04:00
/* 'O'utput */
gdbmsgbuf [ 0 ] = ' O ' ;
/* Fill and send buffers... */
while ( len > 0 ) {
bufptr = gdbmsgbuf + 1 ;
/* Calculate how many this time */
if ( ( len < < 1 ) > ( BUFMAX - 2 ) )
wcount = ( BUFMAX - 2 ) > > 1 ;
else
wcount = len ;
/* Pack in hex chars */
for ( i = 0 ; i < wcount ; i + + )
2011-11-01 04:12:51 +04:00
bufptr = hex_byte_pack ( bufptr , s [ i ] ) ;
2010-04-02 20:48:03 +04:00
* bufptr = ' \0 ' ;
/* Move up */
s + = wcount ;
len - = wcount ;
/* Write packet */
put_packet ( gdbmsgbuf ) ;
}
}
/*
* Convert the memory pointed to by mem into hex , placing result in
* buf . Return a pointer to the last char put in buf ( null ) . May
* return an error .
*/
2010-08-05 18:22:21 +04:00
char * kgdb_mem2hex ( char * mem , char * buf , int count )
2010-04-02 20:48:03 +04:00
{
char * tmp ;
int err ;
/*
* We use the upper half of buf as an intermediate buffer for the
* raw memory copy . Hex conversion will work against this one .
*/
tmp = buf + count ;
2020-06-17 10:37:53 +03:00
err = copy_from_kernel_nofault ( tmp , mem , count ) ;
2010-08-05 18:22:21 +04:00
if ( err )
return NULL ;
while ( count > 0 ) {
2011-11-01 04:12:51 +04:00
buf = hex_byte_pack ( buf , * tmp ) ;
2010-08-05 18:22:21 +04:00
tmp + + ;
count - - ;
2010-04-02 20:48:03 +04:00
}
2010-08-05 18:22:21 +04:00
* buf = 0 ;
2010-04-02 20:48:03 +04:00
2010-08-05 18:22:21 +04:00
return buf ;
2010-04-02 20:48:03 +04:00
}
/*
* Convert the hex array pointed to by buf into binary to be placed in
* mem . Return a pointer to the character AFTER the last byte
* written . May return an error .
*/
int kgdb_hex2mem ( char * buf , char * mem , int count )
{
char * tmp_raw ;
char * tmp_hex ;
/*
* We use the upper half of buf as an intermediate buffer for the
* raw memory that is converted from hex .
*/
tmp_raw = buf + count * 2 ;
tmp_hex = tmp_raw - 1 ;
while ( tmp_hex > = buf ) {
tmp_raw - - ;
2010-08-05 18:22:19 +04:00
* tmp_raw = hex_to_bin ( * tmp_hex - - ) ;
* tmp_raw | = hex_to_bin ( * tmp_hex - - ) < < 4 ;
2010-04-02 20:48:03 +04:00
}
2020-06-17 10:37:53 +03:00
return copy_to_kernel_nofault ( mem , tmp_raw , count ) ;
2010-04-02 20:48:03 +04:00
}
/*
* While we find nice hex chars , build a long_val .
* Return number of chars processed .
*/
int kgdb_hex2long ( char * * ptr , unsigned long * long_val )
{
int hex_val ;
int num = 0 ;
int negate = 0 ;
* long_val = 0 ;
if ( * * ptr = = ' - ' ) {
negate = 1 ;
( * ptr ) + + ;
}
while ( * * ptr ) {
2010-08-05 18:22:19 +04:00
hex_val = hex_to_bin ( * * ptr ) ;
2010-04-02 20:48:03 +04:00
if ( hex_val < 0 )
break ;
* long_val = ( * long_val < < 4 ) | hex_val ;
num + + ;
( * ptr ) + + ;
}
if ( negate )
* long_val = - * long_val ;
return num ;
}
/*
* Copy the binary array pointed to by buf into mem . Fix $ , # , and
* 0x7d escaped with 0x7d . Return - EFAULT on failure or 0 on success .
* The input buf is overwitten with the result to write to mem .
*/
static int kgdb_ebin2mem ( char * buf , char * mem , int count )
{
int size = 0 ;
char * c = buf ;
while ( count - - > 0 ) {
c [ size ] = * buf + + ;
if ( c [ size ] = = 0x7d )
c [ size ] = * buf + + ^ 0x20 ;
size + + ;
}
2020-06-17 10:37:53 +03:00
return copy_to_kernel_nofault ( mem , c , size ) ;
2010-04-02 20:48:03 +04:00
}
2010-08-05 18:22:20 +04:00
# if DBG_MAX_REG_NUM > 0
void pt_regs_to_gdb_regs ( unsigned long * gdb_regs , struct pt_regs * regs )
{
int i ;
int idx = 0 ;
char * ptr = ( char * ) gdb_regs ;
for ( i = 0 ; i < DBG_MAX_REG_NUM ; i + + ) {
dbg_get_reg ( i , ptr + idx , regs ) ;
idx + = dbg_reg_def [ i ] . size ;
}
}
void gdb_regs_to_pt_regs ( unsigned long * gdb_regs , struct pt_regs * regs )
{
int i ;
int idx = 0 ;
char * ptr = ( char * ) gdb_regs ;
for ( i = 0 ; i < DBG_MAX_REG_NUM ; i + + ) {
dbg_set_reg ( i , ptr + idx , regs ) ;
idx + = dbg_reg_def [ i ] . size ;
}
}
# endif /* DBG_MAX_REG_NUM > 0 */
2010-04-02 20:48:03 +04:00
/* Write memory due to an 'M' or 'X' packet. */
static int write_mem_msg ( int binary )
{
char * ptr = & remcom_in_buffer [ 1 ] ;
unsigned long addr ;
unsigned long length ;
int err ;
if ( kgdb_hex2long ( & ptr , & addr ) > 0 & & * ( ptr + + ) = = ' , ' & &
kgdb_hex2long ( & ptr , & length ) > 0 & & * ( ptr + + ) = = ' : ' ) {
if ( binary )
err = kgdb_ebin2mem ( ptr , ( char * ) addr , length ) ;
else
err = kgdb_hex2mem ( ptr , ( char * ) addr , length ) ;
if ( err )
return err ;
if ( CACHE_FLUSH_IS_SAFE )
flush_icache_range ( addr , addr + length ) ;
return 0 ;
}
return - EINVAL ;
}
static void error_packet ( char * pkt , int error )
{
error = - error ;
pkt [ 0 ] = ' E ' ;
pkt [ 1 ] = hex_asc [ ( error / 10 ) ] ;
pkt [ 2 ] = hex_asc [ ( error % 10 ) ] ;
pkt [ 3 ] = ' \0 ' ;
}
/*
* Thread ID accessors . We represent a flat TID space to GDB , where
* the per CPU idle threads ( which under Linux all have PID 0 ) are
* remapped to negative TIDs .
*/
gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol
The gdb debugger understands how to parse short versions of the thread
reference string as long as the bytes are paired in sets of two
characters. The kgdb implementation was always sending 8 leading
zeros which could be omitted, and further optimized in the case of
non-negative thread numbers. The negative numbers are used to
reference a specific cpu in the case of kgdb.
An example of the previous i386 stop packet looks like:
T05thread:00000000000003bb;
New stop packet response:
T05thread:03bb;
The previous ThreadInfo response looks like:
m00000000fffffffe,0000000000000001,0000000000000002,0000000000000003,0000000000000004,0000000000000005,0000000000000006,0000000000000007,000000000000000c,0000000000000088,000000000000008a,000000000000008b,000000000000008c,000000000000008d,000000000000008e,00000000000000d4,00000000000000d5,00000000000000dd
New ThreadInfo response:
mfffffffe,01,02,03,04,05,06,07,0c,88,8a,8b,8c,8d,8e,d4,d5,dd
A few bytes saved means better response time when using kgdb over a
serial line.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-05 18:22:19 +04:00
# define BUF_THREAD_ID_SIZE 8
2010-04-02 20:48:03 +04:00
static char * pack_threadid ( char * pkt , unsigned char * id )
{
gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol
The gdb debugger understands how to parse short versions of the thread
reference string as long as the bytes are paired in sets of two
characters. The kgdb implementation was always sending 8 leading
zeros which could be omitted, and further optimized in the case of
non-negative thread numbers. The negative numbers are used to
reference a specific cpu in the case of kgdb.
An example of the previous i386 stop packet looks like:
T05thread:00000000000003bb;
New stop packet response:
T05thread:03bb;
The previous ThreadInfo response looks like:
m00000000fffffffe,0000000000000001,0000000000000002,0000000000000003,0000000000000004,0000000000000005,0000000000000006,0000000000000007,000000000000000c,0000000000000088,000000000000008a,000000000000008b,000000000000008c,000000000000008d,000000000000008e,00000000000000d4,00000000000000d5,00000000000000dd
New ThreadInfo response:
mfffffffe,01,02,03,04,05,06,07,0c,88,8a,8b,8c,8d,8e,d4,d5,dd
A few bytes saved means better response time when using kgdb over a
serial line.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-05 18:22:19 +04:00
unsigned char * limit ;
int lzero = 1 ;
limit = id + ( BUF_THREAD_ID_SIZE / 2 ) ;
while ( id < limit ) {
if ( ! lzero | | * id ! = 0 ) {
2011-11-01 04:12:51 +04:00
pkt = hex_byte_pack ( pkt , * id ) ;
gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol
The gdb debugger understands how to parse short versions of the thread
reference string as long as the bytes are paired in sets of two
characters. The kgdb implementation was always sending 8 leading
zeros which could be omitted, and further optimized in the case of
non-negative thread numbers. The negative numbers are used to
reference a specific cpu in the case of kgdb.
An example of the previous i386 stop packet looks like:
T05thread:00000000000003bb;
New stop packet response:
T05thread:03bb;
The previous ThreadInfo response looks like:
m00000000fffffffe,0000000000000001,0000000000000002,0000000000000003,0000000000000004,0000000000000005,0000000000000006,0000000000000007,000000000000000c,0000000000000088,000000000000008a,000000000000008b,000000000000008c,000000000000008d,000000000000008e,00000000000000d4,00000000000000d5,00000000000000dd
New ThreadInfo response:
mfffffffe,01,02,03,04,05,06,07,0c,88,8a,8b,8c,8d,8e,d4,d5,dd
A few bytes saved means better response time when using kgdb over a
serial line.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-05 18:22:19 +04:00
lzero = 0 ;
}
id + + ;
}
2010-04-02 20:48:03 +04:00
gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol
The gdb debugger understands how to parse short versions of the thread
reference string as long as the bytes are paired in sets of two
characters. The kgdb implementation was always sending 8 leading
zeros which could be omitted, and further optimized in the case of
non-negative thread numbers. The negative numbers are used to
reference a specific cpu in the case of kgdb.
An example of the previous i386 stop packet looks like:
T05thread:00000000000003bb;
New stop packet response:
T05thread:03bb;
The previous ThreadInfo response looks like:
m00000000fffffffe,0000000000000001,0000000000000002,0000000000000003,0000000000000004,0000000000000005,0000000000000006,0000000000000007,000000000000000c,0000000000000088,000000000000008a,000000000000008b,000000000000008c,000000000000008d,000000000000008e,00000000000000d4,00000000000000d5,00000000000000dd
New ThreadInfo response:
mfffffffe,01,02,03,04,05,06,07,0c,88,8a,8b,8c,8d,8e,d4,d5,dd
A few bytes saved means better response time when using kgdb over a
serial line.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-05 18:22:19 +04:00
if ( lzero )
2011-11-01 04:12:51 +04:00
pkt = hex_byte_pack ( pkt , 0 ) ;
2010-04-02 20:48:03 +04:00
return pkt ;
}
static void int_to_threadref ( unsigned char * id , int value )
{
gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol
The gdb debugger understands how to parse short versions of the thread
reference string as long as the bytes are paired in sets of two
characters. The kgdb implementation was always sending 8 leading
zeros which could be omitted, and further optimized in the case of
non-negative thread numbers. The negative numbers are used to
reference a specific cpu in the case of kgdb.
An example of the previous i386 stop packet looks like:
T05thread:00000000000003bb;
New stop packet response:
T05thread:03bb;
The previous ThreadInfo response looks like:
m00000000fffffffe,0000000000000001,0000000000000002,0000000000000003,0000000000000004,0000000000000005,0000000000000006,0000000000000007,000000000000000c,0000000000000088,000000000000008a,000000000000008b,000000000000008c,000000000000008d,000000000000008e,00000000000000d4,00000000000000d5,00000000000000dd
New ThreadInfo response:
mfffffffe,01,02,03,04,05,06,07,0c,88,8a,8b,8c,8d,8e,d4,d5,dd
A few bytes saved means better response time when using kgdb over a
serial line.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-05 18:22:19 +04:00
put_unaligned_be32 ( value , id ) ;
2010-04-02 20:48:03 +04:00
}
static struct task_struct * getthread ( struct pt_regs * regs , int tid )
{
/*
* Non - positive TIDs are remapped to the cpu shadow information
*/
if ( tid = = 0 | | tid = = - 1 )
tid = - atomic_read ( & kgdb_active ) - 2 ;
if ( tid < - 1 & & tid > - NR_CPUS - 2 ) {
if ( kgdb_info [ - tid - 2 ] . task )
return kgdb_info [ - tid - 2 ] . task ;
else
return idle_task ( - tid - 2 ) ;
}
if ( tid < = 0 ) {
printk ( KERN_ERR " KGDB: Internal thread select error \n " ) ;
dump_stack ( ) ;
return NULL ;
}
/*
* find_task_by_pid_ns ( ) does not take the tasklist lock anymore
* but is nicely RCU locked - hence is a pretty resilient
* thing to use :
*/
return find_task_by_pid_ns ( tid , & init_pid_ns ) ;
}
/*
* Remap normal tasks to their real PID ,
* CPU shadow threads are mapped to - CPU - 2
*/
static inline int shadow_pid ( int realpid )
{
if ( realpid )
return realpid ;
return - raw_smp_processor_id ( ) - 2 ;
}
/*
* All the functions that start with gdb_cmd are the various
* operations to implement the handlers for the gdbserial protocol
* where KGDB is communicating with an external debugger
*/
/* Handle the '?' status packets */
static void gdb_cmd_status ( struct kgdb_state * ks )
{
/*
* We know that this packet is only sent
* during initial connect . So to be safe ,
* we clear out our breakpoints now in case
* GDB is reconnecting .
*/
dbg_remove_all_break ( ) ;
remcom_out_buffer [ 0 ] = ' S ' ;
2011-11-01 04:12:51 +04:00
hex_byte_pack ( & remcom_out_buffer [ 1 ] , ks - > signo ) ;
2010-04-02 20:48:03 +04:00
}
2010-08-05 18:22:21 +04:00
static void gdb_get_regs_helper ( struct kgdb_state * ks )
2010-04-02 20:48:03 +04:00
{
struct task_struct * thread ;
void * local_debuggerinfo ;
int i ;
thread = kgdb_usethread ;
if ( ! thread ) {
thread = kgdb_info [ ks - > cpu ] . task ;
local_debuggerinfo = kgdb_info [ ks - > cpu ] . debuggerinfo ;
} else {
local_debuggerinfo = NULL ;
for_each_online_cpu ( i ) {
/*
* Try to find the task on some other
* or possibly this node if we do not
* find the matching task then we try
* to approximate the results .
*/
if ( thread = = kgdb_info [ i ] . task )
local_debuggerinfo = kgdb_info [ i ] . debuggerinfo ;
}
}
/*
* All threads that don ' t have debuggerinfo should be
* in schedule ( ) sleeping , since all other CPUs
* are in kgdb_wait , and thus have debuggerinfo .
*/
if ( local_debuggerinfo ) {
pt_regs_to_gdb_regs ( gdb_regs , local_debuggerinfo ) ;
} else {
/*
* Pull stuff saved during switch_to ; nothing
* else is accessible ( or even particularly
* relevant ) .
*
* This should be enough for a stack trace .
*/
sleeping_thread_to_gdb_regs ( gdb_regs , thread ) ;
}
2010-08-05 18:22:21 +04:00
}
/* Handle the 'g' get registers request */
static void gdb_cmd_getregs ( struct kgdb_state * ks )
{
gdb_get_regs_helper ( ks ) ;
2010-04-02 20:48:03 +04:00
kgdb_mem2hex ( ( char * ) gdb_regs , remcom_out_buffer , NUMREGBYTES ) ;
}
/* Handle the 'G' set registers request */
static void gdb_cmd_setregs ( struct kgdb_state * ks )
{
kgdb_hex2mem ( & remcom_in_buffer [ 1 ] , ( char * ) gdb_regs , NUMREGBYTES ) ;
if ( kgdb_usethread & & kgdb_usethread ! = current ) {
error_packet ( remcom_out_buffer , - EINVAL ) ;
} else {
gdb_regs_to_pt_regs ( gdb_regs , ks - > linux_regs ) ;
strcpy ( remcom_out_buffer , " OK " ) ;
}
}
/* Handle the 'm' memory read bytes */
static void gdb_cmd_memread ( struct kgdb_state * ks )
{
char * ptr = & remcom_in_buffer [ 1 ] ;
unsigned long length ;
unsigned long addr ;
2010-08-05 18:22:21 +04:00
char * err ;
2010-04-02 20:48:03 +04:00
if ( kgdb_hex2long ( & ptr , & addr ) > 0 & & * ptr + + = = ' , ' & &
kgdb_hex2long ( & ptr , & length ) > 0 ) {
err = kgdb_mem2hex ( ( char * ) addr , remcom_out_buffer , length ) ;
2010-08-05 18:22:21 +04:00
if ( ! err )
error_packet ( remcom_out_buffer , - EINVAL ) ;
2010-04-02 20:48:03 +04:00
} else {
error_packet ( remcom_out_buffer , - EINVAL ) ;
}
}
/* Handle the 'M' memory write bytes */
static void gdb_cmd_memwrite ( struct kgdb_state * ks )
{
int err = write_mem_msg ( 0 ) ;
if ( err )
error_packet ( remcom_out_buffer , err ) ;
else
strcpy ( remcom_out_buffer , " OK " ) ;
}
2010-08-05 18:22:21 +04:00
# if DBG_MAX_REG_NUM > 0
static char * gdb_hex_reg_helper ( int regnum , char * out )
{
int i ;
int offset = 0 ;
for ( i = 0 ; i < regnum ; i + + )
offset + = dbg_reg_def [ i ] . size ;
return kgdb_mem2hex ( ( char * ) gdb_regs + offset , out ,
dbg_reg_def [ i ] . size ) ;
}
/* Handle the 'p' individual regster get */
static void gdb_cmd_reg_get ( struct kgdb_state * ks )
{
unsigned long regnum ;
char * ptr = & remcom_in_buffer [ 1 ] ;
kgdb_hex2long ( & ptr , & regnum ) ;
if ( regnum > = DBG_MAX_REG_NUM ) {
error_packet ( remcom_out_buffer , - EINVAL ) ;
return ;
}
gdb_get_regs_helper ( ks ) ;
gdb_hex_reg_helper ( regnum , remcom_out_buffer ) ;
}
/* Handle the 'P' individual regster set */
static void gdb_cmd_reg_set ( struct kgdb_state * ks )
{
unsigned long regnum ;
char * ptr = & remcom_in_buffer [ 1 ] ;
2010-08-05 18:22:22 +04:00
int i = 0 ;
2010-08-05 18:22:21 +04:00
kgdb_hex2long ( & ptr , & regnum ) ;
if ( * ptr + + ! = ' = ' | |
! ( ! kgdb_usethread | | kgdb_usethread = = current ) | |
! dbg_get_reg ( regnum , gdb_regs , ks - > linux_regs ) ) {
error_packet ( remcom_out_buffer , - EINVAL ) ;
return ;
}
2010-08-05 18:22:22 +04:00
memset ( gdb_regs , 0 , sizeof ( gdb_regs ) ) ;
while ( i < sizeof ( gdb_regs ) * 2 )
if ( hex_to_bin ( ptr [ i ] ) > = 0 )
i + + ;
else
break ;
i = i / 2 ;
kgdb_hex2mem ( ptr , ( char * ) gdb_regs , i ) ;
2010-08-05 18:22:21 +04:00
dbg_set_reg ( regnum , gdb_regs , ks - > linux_regs ) ;
strcpy ( remcom_out_buffer , " OK " ) ;
}
# endif /* DBG_MAX_REG_NUM > 0 */
2010-04-02 20:48:03 +04:00
/* Handle the 'X' memory binary write bytes */
static void gdb_cmd_binwrite ( struct kgdb_state * ks )
{
int err = write_mem_msg ( 1 ) ;
if ( err )
error_packet ( remcom_out_buffer , err ) ;
else
strcpy ( remcom_out_buffer , " OK " ) ;
}
/* Handle the 'D' or 'k', detach or kill packets */
static void gdb_cmd_detachkill ( struct kgdb_state * ks )
{
int error ;
/* The detach case */
if ( remcom_in_buffer [ 0 ] = = ' D ' ) {
error = dbg_remove_all_break ( ) ;
if ( error < 0 ) {
error_packet ( remcom_out_buffer , error ) ;
} else {
strcpy ( remcom_out_buffer , " OK " ) ;
kgdb_connected = 0 ;
}
put_packet ( remcom_out_buffer ) ;
} else {
/*
* Assume the kill case , with no exit code checking ,
* trying to force detach the debugger :
*/
dbg_remove_all_break ( ) ;
kgdb_connected = 0 ;
}
}
/* Handle the 'R' reboot packets */
static int gdb_cmd_reboot ( struct kgdb_state * ks )
{
/* For now, only honor R0 */
if ( strcmp ( remcom_in_buffer , " R0 " ) = = 0 ) {
printk ( KERN_CRIT " Executing emergency reboot \n " ) ;
strcpy ( remcom_out_buffer , " OK " ) ;
put_packet ( remcom_out_buffer ) ;
/*
* Execution should not return from
* machine_emergency_restart ( )
*/
machine_emergency_restart ( ) ;
kgdb_connected = 0 ;
return 1 ;
}
return 0 ;
}
/* Handle the 'q' query packets */
static void gdb_cmd_query ( struct kgdb_state * ks )
{
struct task_struct * g ;
struct task_struct * p ;
gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol
The gdb debugger understands how to parse short versions of the thread
reference string as long as the bytes are paired in sets of two
characters. The kgdb implementation was always sending 8 leading
zeros which could be omitted, and further optimized in the case of
non-negative thread numbers. The negative numbers are used to
reference a specific cpu in the case of kgdb.
An example of the previous i386 stop packet looks like:
T05thread:00000000000003bb;
New stop packet response:
T05thread:03bb;
The previous ThreadInfo response looks like:
m00000000fffffffe,0000000000000001,0000000000000002,0000000000000003,0000000000000004,0000000000000005,0000000000000006,0000000000000007,000000000000000c,0000000000000088,000000000000008a,000000000000008b,000000000000008c,000000000000008d,000000000000008e,00000000000000d4,00000000000000d5,00000000000000dd
New ThreadInfo response:
mfffffffe,01,02,03,04,05,06,07,0c,88,8a,8b,8c,8d,8e,d4,d5,dd
A few bytes saved means better response time when using kgdb over a
serial line.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-05 18:22:19 +04:00
unsigned char thref [ BUF_THREAD_ID_SIZE ] ;
2010-04-02 20:48:03 +04:00
char * ptr ;
int i ;
int cpu ;
int finished = 0 ;
switch ( remcom_in_buffer [ 1 ] ) {
case ' s ' :
case ' f ' :
2010-07-22 04:27:05 +04:00
if ( memcmp ( remcom_in_buffer + 2 , " ThreadInfo " , 10 ) )
2010-04-02 20:48:03 +04:00
break ;
i = 0 ;
remcom_out_buffer [ 0 ] = ' m ' ;
ptr = remcom_out_buffer + 1 ;
if ( remcom_in_buffer [ 1 ] = = ' f ' ) {
/* Each cpu is a shadow thread */
for_each_online_cpu ( cpu ) {
ks - > thr_query = 0 ;
int_to_threadref ( thref , - cpu - 2 ) ;
gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol
The gdb debugger understands how to parse short versions of the thread
reference string as long as the bytes are paired in sets of two
characters. The kgdb implementation was always sending 8 leading
zeros which could be omitted, and further optimized in the case of
non-negative thread numbers. The negative numbers are used to
reference a specific cpu in the case of kgdb.
An example of the previous i386 stop packet looks like:
T05thread:00000000000003bb;
New stop packet response:
T05thread:03bb;
The previous ThreadInfo response looks like:
m00000000fffffffe,0000000000000001,0000000000000002,0000000000000003,0000000000000004,0000000000000005,0000000000000006,0000000000000007,000000000000000c,0000000000000088,000000000000008a,000000000000008b,000000000000008c,000000000000008d,000000000000008e,00000000000000d4,00000000000000d5,00000000000000dd
New ThreadInfo response:
mfffffffe,01,02,03,04,05,06,07,0c,88,8a,8b,8c,8d,8e,d4,d5,dd
A few bytes saved means better response time when using kgdb over a
serial line.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-05 18:22:19 +04:00
ptr = pack_threadid ( ptr , thref ) ;
2010-04-02 20:48:03 +04:00
* ( ptr + + ) = ' , ' ;
i + + ;
}
}
do_each_thread ( g , p ) {
if ( i > = ks - > thr_query & & ! finished ) {
int_to_threadref ( thref , p - > pid ) ;
gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol
The gdb debugger understands how to parse short versions of the thread
reference string as long as the bytes are paired in sets of two
characters. The kgdb implementation was always sending 8 leading
zeros which could be omitted, and further optimized in the case of
non-negative thread numbers. The negative numbers are used to
reference a specific cpu in the case of kgdb.
An example of the previous i386 stop packet looks like:
T05thread:00000000000003bb;
New stop packet response:
T05thread:03bb;
The previous ThreadInfo response looks like:
m00000000fffffffe,0000000000000001,0000000000000002,0000000000000003,0000000000000004,0000000000000005,0000000000000006,0000000000000007,000000000000000c,0000000000000088,000000000000008a,000000000000008b,000000000000008c,000000000000008d,000000000000008e,00000000000000d4,00000000000000d5,00000000000000dd
New ThreadInfo response:
mfffffffe,01,02,03,04,05,06,07,0c,88,8a,8b,8c,8d,8e,d4,d5,dd
A few bytes saved means better response time when using kgdb over a
serial line.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-05 18:22:19 +04:00
ptr = pack_threadid ( ptr , thref ) ;
2010-04-02 20:48:03 +04:00
* ( ptr + + ) = ' , ' ;
ks - > thr_query + + ;
if ( ks - > thr_query % KGDB_MAX_THREAD_QUERY = = 0 )
finished = 1 ;
}
i + + ;
} while_each_thread ( g , p ) ;
* ( - - ptr ) = ' \0 ' ;
break ;
case ' C ' :
/* Current thread id */
strcpy ( remcom_out_buffer , " QC " ) ;
ks - > threadid = shadow_pid ( current - > pid ) ;
int_to_threadref ( thref , ks - > threadid ) ;
pack_threadid ( remcom_out_buffer + 2 , thref ) ;
break ;
case ' T ' :
2010-07-22 04:27:05 +04:00
if ( memcmp ( remcom_in_buffer + 1 , " ThreadExtraInfo, " , 16 ) )
2010-04-02 20:48:03 +04:00
break ;
2010-07-22 04:27:05 +04:00
2010-04-02 20:48:03 +04:00
ks - > threadid = 0 ;
ptr = remcom_in_buffer + 17 ;
kgdb_hex2long ( & ptr , & ks - > threadid ) ;
if ( ! getthread ( ks - > linux_regs , ks - > threadid ) ) {
error_packet ( remcom_out_buffer , - EINVAL ) ;
break ;
}
if ( ( int ) ks - > threadid > 0 ) {
kgdb_mem2hex ( getthread ( ks - > linux_regs ,
ks - > threadid ) - > comm ,
remcom_out_buffer , 16 ) ;
} else {
static char tmpstr [ 23 + BUF_THREAD_ID_SIZE ] ;
sprintf ( tmpstr , " shadowCPU%d " ,
( int ) ( - ks - > threadid - 2 ) ) ;
kgdb_mem2hex ( tmpstr , remcom_out_buffer , strlen ( tmpstr ) ) ;
}
break ;
2010-05-21 06:04:24 +04:00
# ifdef CONFIG_KGDB_KDB
case ' R ' :
if ( strncmp ( remcom_in_buffer , " qRcmd, " , 6 ) = = 0 ) {
int len = strlen ( remcom_in_buffer + 6 ) ;
if ( ( len % 2 ) ! = 0 ) {
strcpy ( remcom_out_buffer , " E01 " ) ;
break ;
}
kgdb_hex2mem ( remcom_in_buffer + 6 ,
remcom_out_buffer , len ) ;
len = len / 2 ;
remcom_out_buffer [ len + + ] = 0 ;
2013-01-03 01:20:49 +04:00
kdb_common_init_state ( ks ) ;
2010-05-21 06:04:24 +04:00
kdb_parse ( remcom_out_buffer ) ;
2013-01-03 01:20:49 +04:00
kdb_common_deinit_state ( ) ;
2010-05-21 06:04:24 +04:00
strcpy ( remcom_out_buffer , " OK " ) ;
}
break ;
# endif
2020-06-23 08:36:42 +03:00
# ifdef CONFIG_HAVE_ARCH_KGDB_QXFER_PKT
case ' S ' :
if ( ! strncmp ( remcom_in_buffer , " qSupported: " , 11 ) )
strcpy ( remcom_out_buffer , kgdb_arch_gdb_stub_feature ) ;
break ;
case ' X ' :
if ( ! strncmp ( remcom_in_buffer , " qXfer: " , 6 ) )
kgdb_arch_handle_qxfer_pkt ( remcom_in_buffer ,
remcom_out_buffer ) ;
break ;
# endif
default :
break ;
2010-04-02 20:48:03 +04:00
}
}
/* Handle the 'H' task query packets */
static void gdb_cmd_task ( struct kgdb_state * ks )
{
struct task_struct * thread ;
char * ptr ;
switch ( remcom_in_buffer [ 1 ] ) {
case ' g ' :
ptr = & remcom_in_buffer [ 2 ] ;
kgdb_hex2long ( & ptr , & ks - > threadid ) ;
thread = getthread ( ks - > linux_regs , ks - > threadid ) ;
if ( ! thread & & ks - > threadid > 0 ) {
error_packet ( remcom_out_buffer , - EINVAL ) ;
break ;
}
kgdb_usethread = thread ;
ks - > kgdb_usethreadid = ks - > threadid ;
strcpy ( remcom_out_buffer , " OK " ) ;
break ;
case ' c ' :
ptr = & remcom_in_buffer [ 2 ] ;
kgdb_hex2long ( & ptr , & ks - > threadid ) ;
if ( ! ks - > threadid ) {
kgdb_contthread = NULL ;
} else {
thread = getthread ( ks - > linux_regs , ks - > threadid ) ;
if ( ! thread & & ks - > threadid > 0 ) {
error_packet ( remcom_out_buffer , - EINVAL ) ;
break ;
}
kgdb_contthread = thread ;
}
strcpy ( remcom_out_buffer , " OK " ) ;
break ;
}
}
/* Handle the 'T' thread query packets */
static void gdb_cmd_thread ( struct kgdb_state * ks )
{
char * ptr = & remcom_in_buffer [ 1 ] ;
struct task_struct * thread ;
kgdb_hex2long ( & ptr , & ks - > threadid ) ;
thread = getthread ( ks - > linux_regs , ks - > threadid ) ;
if ( thread )
strcpy ( remcom_out_buffer , " OK " ) ;
else
error_packet ( remcom_out_buffer , - EINVAL ) ;
}
/* Handle the 'z' or 'Z' breakpoint remove or set packets */
static void gdb_cmd_break ( struct kgdb_state * ks )
{
/*
* Since GDB - 5.3 , it ' s been drafted that ' 0 ' is a software
* breakpoint , ' 1 ' is a hardware breakpoint , so let ' s do that .
*/
char * bpt_type = & remcom_in_buffer [ 1 ] ;
char * ptr = & remcom_in_buffer [ 2 ] ;
unsigned long addr ;
unsigned long length ;
int error = 0 ;
if ( arch_kgdb_ops . set_hw_breakpoint & & * bpt_type > = ' 1 ' ) {
/* Unsupported */
if ( * bpt_type > ' 4 ' )
return ;
} else {
if ( * bpt_type ! = ' 0 ' & & * bpt_type ! = ' 1 ' )
/* Unsupported. */
return ;
}
/*
* Test if this is a hardware breakpoint , and
* if we support it :
*/
if ( * bpt_type = = ' 1 ' & & ! ( arch_kgdb_ops . flags & KGDB_HW_BREAKPOINT ) )
/* Unsupported. */
return ;
if ( * ( ptr + + ) ! = ' , ' ) {
error_packet ( remcom_out_buffer , - EINVAL ) ;
return ;
}
if ( ! kgdb_hex2long ( & ptr , & addr ) ) {
error_packet ( remcom_out_buffer , - EINVAL ) ;
return ;
}
if ( * ( ptr + + ) ! = ' , ' | |
! kgdb_hex2long ( & ptr , & length ) ) {
error_packet ( remcom_out_buffer , - EINVAL ) ;
return ;
}
if ( remcom_in_buffer [ 0 ] = = ' Z ' & & * bpt_type = = ' 0 ' )
error = dbg_set_sw_break ( addr ) ;
else if ( remcom_in_buffer [ 0 ] = = ' z ' & & * bpt_type = = ' 0 ' )
error = dbg_remove_sw_break ( addr ) ;
else if ( remcom_in_buffer [ 0 ] = = ' Z ' )
error = arch_kgdb_ops . set_hw_breakpoint ( addr ,
( int ) length , * bpt_type - ' 0 ' ) ;
else if ( remcom_in_buffer [ 0 ] = = ' z ' )
error = arch_kgdb_ops . remove_hw_breakpoint ( addr ,
( int ) length , * bpt_type - ' 0 ' ) ;
if ( error = = 0 )
strcpy ( remcom_out_buffer , " OK " ) ;
else
error_packet ( remcom_out_buffer , error ) ;
}
/* Handle the 'C' signal / exception passing packets */
static int gdb_cmd_exception_pass ( struct kgdb_state * ks )
{
/* C09 == pass exception
* C15 = = detach kgdb , pass exception
*/
if ( remcom_in_buffer [ 1 ] = = ' 0 ' & & remcom_in_buffer [ 2 ] = = ' 9 ' ) {
ks - > pass_exception = 1 ;
remcom_in_buffer [ 0 ] = ' c ' ;
} else if ( remcom_in_buffer [ 1 ] = = ' 1 ' & & remcom_in_buffer [ 2 ] = = ' 5 ' ) {
ks - > pass_exception = 1 ;
remcom_in_buffer [ 0 ] = ' D ' ;
dbg_remove_all_break ( ) ;
kgdb_connected = 0 ;
return 1 ;
} else {
gdbstub_msg_write ( " KGDB only knows signal 9 (pass) "
" and 15 (pass and disconnect) \n "
" Executing a continue without signal passing \n " , 0 ) ;
remcom_in_buffer [ 0 ] = ' c ' ;
}
/* Indicate fall through */
return - 1 ;
}
/*
* This function performs all gdbserial command procesing
*/
int gdb_serial_stub ( struct kgdb_state * ks )
{
int error = 0 ;
int tmp ;
2010-08-05 18:22:21 +04:00
/* Initialize comm buffer and globals. */
2010-04-02 20:48:03 +04:00
memset ( remcom_out_buffer , 0 , sizeof ( remcom_out_buffer ) ) ;
2010-08-05 18:22:21 +04:00
kgdb_usethread = kgdb_info [ ks - > cpu ] . task ;
ks - > kgdb_usethreadid = shadow_pid ( kgdb_info [ ks - > cpu ] . task - > pid ) ;
ks - > pass_exception = 0 ;
2010-04-02 20:48:03 +04:00
if ( kgdb_connected ) {
gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol
The gdb debugger understands how to parse short versions of the thread
reference string as long as the bytes are paired in sets of two
characters. The kgdb implementation was always sending 8 leading
zeros which could be omitted, and further optimized in the case of
non-negative thread numbers. The negative numbers are used to
reference a specific cpu in the case of kgdb.
An example of the previous i386 stop packet looks like:
T05thread:00000000000003bb;
New stop packet response:
T05thread:03bb;
The previous ThreadInfo response looks like:
m00000000fffffffe,0000000000000001,0000000000000002,0000000000000003,0000000000000004,0000000000000005,0000000000000006,0000000000000007,000000000000000c,0000000000000088,000000000000008a,000000000000008b,000000000000008c,000000000000008d,000000000000008e,00000000000000d4,00000000000000d5,00000000000000dd
New ThreadInfo response:
mfffffffe,01,02,03,04,05,06,07,0c,88,8a,8b,8c,8d,8e,d4,d5,dd
A few bytes saved means better response time when using kgdb over a
serial line.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-05 18:22:19 +04:00
unsigned char thref [ BUF_THREAD_ID_SIZE ] ;
2010-04-02 20:48:03 +04:00
char * ptr ;
/* Reply to host that an exception has occurred */
ptr = remcom_out_buffer ;
* ptr + + = ' T ' ;
2011-11-01 04:12:51 +04:00
ptr = hex_byte_pack ( ptr , ks - > signo ) ;
2010-04-02 20:48:03 +04:00
ptr + = strlen ( strcpy ( ptr , " thread: " ) ) ;
int_to_threadref ( thref , shadow_pid ( current - > pid ) ) ;
ptr = pack_threadid ( ptr , thref ) ;
* ptr + + = ' ; ' ;
put_packet ( remcom_out_buffer ) ;
}
while ( 1 ) {
error = 0 ;
/* Clear the out buffer. */
memset ( remcom_out_buffer , 0 , sizeof ( remcom_out_buffer ) ) ;
get_packet ( remcom_in_buffer ) ;
switch ( remcom_in_buffer [ 0 ] ) {
case ' ? ' : /* gdbserial status */
gdb_cmd_status ( ks ) ;
break ;
case ' g ' : /* return the value of the CPU registers */
gdb_cmd_getregs ( ks ) ;
break ;
case ' G ' : /* set the value of the CPU registers - return OK */
gdb_cmd_setregs ( ks ) ;
break ;
case ' m ' : /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
gdb_cmd_memread ( ks ) ;
break ;
case ' M ' : /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */
gdb_cmd_memwrite ( ks ) ;
break ;
2010-08-05 18:22:21 +04:00
# if DBG_MAX_REG_NUM > 0
case ' p ' : /* pXX Return gdb register XX (in hex) */
gdb_cmd_reg_get ( ks ) ;
break ;
case ' P ' : /* PXX=aaaa Set gdb register XX to aaaa (in hex) */
gdb_cmd_reg_set ( ks ) ;
break ;
# endif /* DBG_MAX_REG_NUM > 0 */
2010-04-02 20:48:03 +04:00
case ' X ' : /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */
gdb_cmd_binwrite ( ks ) ;
break ;
/* kill or detach. KGDB should treat this like a
* continue .
*/
case ' D ' : /* Debugger detach */
case ' k ' : /* Debugger detach via kill */
gdb_cmd_detachkill ( ks ) ;
goto default_handle ;
case ' R ' : /* Reboot */
if ( gdb_cmd_reboot ( ks ) )
goto default_handle ;
break ;
case ' q ' : /* query command */
gdb_cmd_query ( ks ) ;
break ;
case ' H ' : /* task related */
gdb_cmd_task ( ks ) ;
break ;
case ' T ' : /* Query thread status */
gdb_cmd_thread ( ks ) ;
break ;
case ' z ' : /* Break point remove */
case ' Z ' : /* Break point set */
gdb_cmd_break ( ks ) ;
break ;
2010-05-21 06:04:21 +04:00
# ifdef CONFIG_KGDB_KDB
case ' 3 ' : /* Escape into back into kdb */
if ( remcom_in_buffer [ 1 ] = = ' \0 ' ) {
gdb_cmd_detachkill ( ks ) ;
return DBG_PASS_EVENT ;
}
# endif
2019-02-26 22:16:14 +03:00
/* Fall through */
2010-04-02 20:48:03 +04:00
case ' C ' : /* Exception passing */
tmp = gdb_cmd_exception_pass ( ks ) ;
if ( tmp > 0 )
goto default_handle ;
if ( tmp = = 0 )
break ;
2019-02-26 22:16:14 +03:00
/* Fall through - on tmp < 0 */
2010-04-02 20:48:03 +04:00
case ' c ' : /* Continue packet */
case ' s ' : /* Single step packet */
if ( kgdb_contthread & & kgdb_contthread ! = current ) {
/* Can't switch threads in kgdb */
error_packet ( remcom_out_buffer , - EINVAL ) ;
break ;
}
dbg_activate_sw_breakpoints ( ) ;
2019-02-26 22:16:14 +03:00
/* Fall through - to default processing */
2010-04-02 20:48:03 +04:00
default :
default_handle :
error = kgdb_arch_handle_exception ( ks - > ex_vector ,
ks - > signo ,
ks - > err_code ,
remcom_in_buffer ,
remcom_out_buffer ,
ks - > linux_regs ) ;
/*
* Leave cmd processing on error , detach ,
* kill , continue , or single step .
*/
if ( error > = 0 | | remcom_in_buffer [ 0 ] = = ' D ' | |
remcom_in_buffer [ 0 ] = = ' k ' ) {
error = 0 ;
goto kgdb_exit ;
}
}
/* reply to the request */
put_packet ( remcom_out_buffer ) ;
}
kgdb_exit :
if ( ks - > pass_exception )
error = 1 ;
return error ;
}
2010-05-21 06:04:21 +04:00
int gdbstub_state ( struct kgdb_state * ks , char * cmd )
{
int error ;
switch ( cmd [ 0 ] ) {
case ' e ' :
error = kgdb_arch_handle_exception ( ks - > ex_vector ,
ks - > signo ,
ks - > err_code ,
remcom_in_buffer ,
remcom_out_buffer ,
ks - > linux_regs ) ;
return error ;
case ' s ' :
case ' c ' :
2019-04-22 19:33:42 +03:00
strscpy ( remcom_in_buffer , cmd , sizeof ( remcom_in_buffer ) ) ;
2010-05-21 06:04:21 +04:00
return 0 ;
2011-05-23 22:17:41 +04:00
case ' $ ' :
2019-04-22 19:33:42 +03:00
strscpy ( remcom_in_buffer , cmd , sizeof ( remcom_in_buffer ) ) ;
2011-05-23 22:17:41 +04:00
gdbstub_use_prev_in_buf = strlen ( remcom_in_buffer ) ;
gdbstub_prev_in_buf_pos = 0 ;
return 0 ;
2010-05-21 06:04:21 +04:00
}
dbg_io_ops - > write_char ( ' + ' ) ;
put_packet ( remcom_out_buffer ) ;
return 0 ;
}
2011-03-18 19:54:31 +03:00
/**
* gdbstub_exit - Send an exit message to GDB
* @ status : The exit code to report .
*/
void gdbstub_exit ( int status )
{
unsigned char checksum , ch , buffer [ 3 ] ;
int loop ;
2012-03-16 23:20:41 +04:00
if ( ! kgdb_connected )
return ;
kgdb_connected = 0 ;
if ( ! dbg_io_ops | | dbg_kdb_mode )
return ;
2011-03-18 19:54:31 +03:00
buffer [ 0 ] = ' W ' ;
buffer [ 1 ] = hex_asc_hi ( status ) ;
buffer [ 2 ] = hex_asc_lo ( status ) ;
dbg_io_ops - > write_char ( ' $ ' ) ;
checksum = 0 ;
for ( loop = 0 ; loop < 3 ; loop + + ) {
ch = buffer [ loop ] ;
checksum + = ch ;
dbg_io_ops - > write_char ( ch ) ;
}
dbg_io_ops - > write_char ( ' # ' ) ;
dbg_io_ops - > write_char ( hex_asc_hi ( checksum ) ) ;
dbg_io_ops - > write_char ( hex_asc_lo ( checksum ) ) ;
/* make sure the output is flushed, lest the bootloader clobber it */
2012-03-16 16:17:13 +04:00
if ( dbg_io_ops - > flush )
dbg_io_ops - > flush ( ) ;
2011-03-18 19:54:31 +03:00
}