2008-04-27 08:59:43 +02:00
/*
* c67x00 . h : Cypress C67X00 USB register and field definitions
*
* Copyright ( C ) 2006 - 2008 Barco N . V .
* Derived from the Cypress cy7c67200 / 300 ezusb linux driver and
* based on multiple host controller drivers inside the linux kernel .
*
* This program is free software ; you can redistribute it and / or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation ; either version 2 of the License , or
* ( at your option ) any later version .
*
* This program is distributed in the hope that it will be useful ,
* but WITHOUT ANY WARRANTY ; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
* GNU General Public License for more details .
*
* You should have received a copy of the GNU General Public License
* along with this program ; if not , write to the Free Software
* Foundation , Inc . , 51 Franklin Street , Fifth Floor , Boston ,
* MA 02110 - 1301 USA .
*/
# ifndef _USB_C67X00_H
# define _USB_C67X00_H
# include <linux/spinlock.h>
# include <linux/platform_device.h>
# include <linux/completion.h>
# include <linux/mutex.h>
/* ---------------------------------------------------------------------
* Cypress C67x00 register definitions
*/
/* Hardware Revision Register */
# define HW_REV_REG 0xC004
/* General USB registers */
/* ===================== */
/* USB Control Register */
# define USB_CTL_REG(x) ((x) ? 0xC0AA : 0xC08A)
# define LOW_SPEED_PORT(x) ((x) ? 0x0800 : 0x0400)
# define HOST_MODE 0x0200
# define PORT_RES_EN(x) ((x) ? 0x0100 : 0x0080)
# define SOF_EOP_EN(x) ((x) ? 0x0002 : 0x0001)
/* USB status register - Notice it has different content in hcd/udc mode */
# define USB_STAT_REG(x) ((x) ? 0xC0B0 : 0xC090)
# define EP0_IRQ_FLG 0x0001
# define EP1_IRQ_FLG 0x0002
# define EP2_IRQ_FLG 0x0004
# define EP3_IRQ_FLG 0x0008
# define EP4_IRQ_FLG 0x0010
# define EP5_IRQ_FLG 0x0020
# define EP6_IRQ_FLG 0x0040
# define EP7_IRQ_FLG 0x0080
# define RESET_IRQ_FLG 0x0100
# define SOF_EOP_IRQ_FLG 0x0200
# define ID_IRQ_FLG 0x4000
# define VBUS_IRQ_FLG 0x8000
/* USB Host only registers */
/* ======================= */
/* Host n Control Register */
# define HOST_CTL_REG(x) ((x) ? 0xC0A0 : 0xC080)
# define PREAMBLE_EN 0x0080 /* Preamble enable */
# define SEQ_SEL 0x0040 /* Data Toggle Sequence Bit Select */
# define ISO_EN 0x0010 /* Isochronous enable */
# define ARM_EN 0x0001 /* Arm operation */
/* Host n Interrupt Enable Register */
# define HOST_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C)
# define SOF_EOP_IRQ_EN 0x0200 /* SOF/EOP Interrupt Enable */
# define SOF_EOP_TMOUT_IRQ_EN 0x0800 /* SOF/EOP Timeout Interrupt Enable */
# define ID_IRQ_EN 0x4000 /* ID interrupt enable */
# define VBUS_IRQ_EN 0x8000 /* VBUS interrupt enable */
# define DONE_IRQ_EN 0x0001 /* Done Interrupt Enable */
/* USB status register */
# define HOST_STAT_MASK 0x02FD
# define PORT_CONNECT_CHANGE(x) ((x) ? 0x0020 : 0x0010)
# define PORT_SE0_STATUS(x) ((x) ? 0x0008 : 0x0004)
/* Host Frame Register */
# define HOST_FRAME_REG(x) ((x) ? 0xC0B6 : 0xC096)
# define HOST_FRAME_MASK 0x07FF
/* USB Peripheral only registers */
/* ============================= */
/* Device n Port Sel reg */
# define DEVICE_N_PORT_SEL(x) ((x) ? 0xC0A4 : 0xC084)
/* Device n Interrupt Enable Register */
# define DEVICE_N_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C)
# define DEVICE_N_ENDPOINT_N_CTL_REG(dev, ep) ((dev) \
? ( 0x0280 + ( ep < < 4 ) ) \
: ( 0x0200 + ( ep < < 4 ) ) )
# define DEVICE_N_ENDPOINT_N_STAT_REG(dev, ep) ((dev) \
? ( 0x0286 + ( ep < < 4 ) ) \
: ( 0x0206 + ( ep < < 4 ) ) )
# define DEVICE_N_ADDRESS(dev) ((dev) ? (0xC0AE) : (0xC08E))
/* HPI registers */
/* ============= */
/* HPI Status register */
# define SOFEOP_FLG(x) (1 << ((x) ? 12 : 10))
# define SIEMSG_FLG(x) (1 << (4 + (x)))
# define RESET_FLG(x) ((x) ? 0x0200 : 0x0002)
# define DONE_FLG(x) (1 << (2 + (x)))
# define RESUME_FLG(x) (1 << (6 + (x)))
# define MBX_OUT_FLG 0x0001 /* Message out available */
# define MBX_IN_FLG 0x0100
# define ID_FLG 0x4000
# define VBUS_FLG 0x8000
/* Interrupt routing register */
# define HPI_IRQ_ROUTING_REG 0x0142
# define HPI_SWAP_ENABLE(x) ((x) ? 0x0100 : 0x0001)
# define RESET_TO_HPI_ENABLE(x) ((x) ? 0x0200 : 0x0002)
# define DONE_TO_HPI_ENABLE(x) ((x) ? 0x0008 : 0x0004)
# define RESUME_TO_HPI_ENABLE(x) ((x) ? 0x0080 : 0x0040)
# define SOFEOP_TO_HPI_EN(x) ((x) ? 0x2000 : 0x0800)
# define SOFEOP_TO_CPU_EN(x) ((x) ? 0x1000 : 0x0400)
# define ID_TO_HPI_ENABLE 0x4000
# define VBUS_TO_HPI_ENABLE 0x8000
/* SIE msg registers */
# define SIEMSG_REG(x) ((x) ? 0x0148 : 0x0144)
# define HUSB_TDListDone 0x1000
# define SUSB_EP0_MSG 0x0001
# define SUSB_EP1_MSG 0x0002
# define SUSB_EP2_MSG 0x0004
# define SUSB_EP3_MSG 0x0008
# define SUSB_EP4_MSG 0x0010
# define SUSB_EP5_MSG 0x0020
# define SUSB_EP6_MSG 0x0040
# define SUSB_EP7_MSG 0x0080
# define SUSB_RST_MSG 0x0100
# define SUSB_SOF_MSG 0x0200
# define SUSB_CFG_MSG 0x0400
# define SUSB_SUS_MSG 0x0800
# define SUSB_ID_MSG 0x4000
# define SUSB_VBUS_MSG 0x8000
/* BIOS interrupt routines */
# define SUSBx_RECEIVE_INT(x) ((x) ? 97 : 81)
# define SUSBx_SEND_INT(x) ((x) ? 96 : 80)
# define SUSBx_DEV_DESC_VEC(x) ((x) ? 0x00D4 : 0x00B4)
# define SUSBx_CONF_DESC_VEC(x) ((x) ? 0x00D6 : 0x00B6)
# define SUSBx_STRING_DESC_VEC(x) ((x) ? 0x00D8 : 0x00B8)
# define CY_HCD_BUF_ADDR 0x500 /* Base address for host */
# define SIE_TD_SIZE 0x200 /* size of the td list */
# define SIE_TD_BUF_SIZE 0x400 /* size of the data buffer */
# define SIE_TD_OFFSET(host) ((host) ? (SIE_TD_SIZE+SIE_TD_BUF_SIZE) : 0)
# define SIE_BUF_OFFSET(host) (SIE_TD_OFFSET(host) + SIE_TD_SIZE)
/* Base address of HCD + 2 x TD_SIZE + 2 x TD_BUF_SIZE */
# define CY_UDC_REQ_HEADER_BASE 0x1100
/* 8- byte request headers for IN/OUT transfers */
# define CY_UDC_REQ_HEADER_SIZE 8
# define CY_UDC_REQ_HEADER_ADDR(ep_num) (CY_UDC_REQ_HEADER_BASE + \
( ( ep_num ) * CY_UDC_REQ_HEADER_SIZE ) )
# define CY_UDC_DESC_BASE_ADDRESS (CY_UDC_REQ_HEADER_ADDR(8))
# define CY_UDC_BIOS_REPLACE_BASE 0x1800
# define CY_UDC_REQ_BUFFER_BASE 0x2000
# define CY_UDC_REQ_BUFFER_SIZE 0x0400
# define CY_UDC_REQ_BUFFER_ADDR(ep_num) (CY_UDC_REQ_BUFFER_BASE + \
( ( ep_num ) * CY_UDC_REQ_BUFFER_SIZE ) )
/* ---------------------------------------------------------------------
* Driver data structures
*/
struct c67x00_device ;
/**
* struct c67x00_sie - Common data associated with a SIE
* @ lock : lock to protect this struct and the associated chip registers
* @ private_data : subdriver dependent data
* @ irq : subdriver dependent irq handler , set NULL when not used
* @ dev : link to common driver structure
* @ sie_num : SIE number on chip , starting from 0
* @ mode : SIE mode ( host / peripheral / otg / not used )
*/
struct c67x00_sie {
/* Entries to be used by the subdrivers */
spinlock_t lock ; /* protect this structure */
void * private_data ;
void ( * irq ) ( struct c67x00_sie * sie , u16 int_status , u16 msg ) ;
/* Read only: */
struct c67x00_device * dev ;
int sie_num ;
int mode ;
} ;
# define sie_dev(s) (&(s)->dev->pdev->dev)
/**
* struct c67x00_lcp
*/
struct c67x00_lcp {
/* Internal use only */
struct mutex mutex ;
struct completion msg_received ;
u16 last_msg ;
} ;
/*
* struct c67x00_hpi
*/
struct c67x00_hpi {
void __iomem * base ;
int regstep ;
spinlock_t lock ;
struct c67x00_lcp lcp ;
} ;
# define C67X00_SIES 2
# define C67X00_PORTS 2
/**
* struct c67x00_device - Common data associated with a c67x00 instance
* @ hpi : hpi addresses
* @ sie : array of sie ' s on this chip
* @ pdev : platform device of instance
* @ pdata : configuration provided by the platform
*/
struct c67x00_device {
struct c67x00_hpi hpi ;
struct c67x00_sie sie [ C67X00_SIES ] ;
struct platform_device * pdev ;
struct c67x00_platform_data * pdata ;
} ;
/* ---------------------------------------------------------------------
* Low level interface functions
*/
/* Host Port Interface (HPI) functions */
u16 c67x00_ll_hpi_status ( struct c67x00_device * dev ) ;
void c67x00_ll_hpi_reg_init ( struct c67x00_device * dev ) ;
void c67x00_ll_hpi_enable_sofeop ( struct c67x00_sie * sie ) ;
void c67x00_ll_hpi_disable_sofeop ( struct c67x00_sie * sie ) ;
/* General functions */
u16 c67x00_ll_fetch_siemsg ( struct c67x00_device * dev , int sie_num ) ;
u16 c67x00_ll_get_usb_ctl ( struct c67x00_sie * sie ) ;
void c67x00_ll_usb_clear_status ( struct c67x00_sie * sie , u16 bits ) ;
u16 c67x00_ll_usb_get_status ( struct c67x00_sie * sie ) ;
void c67x00_ll_write_mem_le16 ( struct c67x00_device * dev , u16 addr ,
void * data , int len ) ;
void c67x00_ll_read_mem_le16 ( struct c67x00_device * dev , u16 addr ,
void * data , int len ) ;
2008-04-27 08:59:45 +02:00
/* Host specific functions */
void c67x00_ll_set_husb_eot ( struct c67x00_device * dev , u16 value ) ;
void c67x00_ll_husb_reset ( struct c67x00_sie * sie , int port ) ;
void c67x00_ll_husb_set_current_td ( struct c67x00_sie * sie , u16 addr ) ;
u16 c67x00_ll_husb_get_current_td ( struct c67x00_sie * sie ) ;
u16 c67x00_ll_husb_get_frame ( struct c67x00_sie * sie ) ;
void c67x00_ll_husb_init_host_port ( struct c67x00_sie * sie ) ;
void c67x00_ll_husb_reset_port ( struct c67x00_sie * sie , int port ) ;
2008-04-27 08:59:43 +02:00
/* Called by c67x00_irq to handle lcp interrupts */
void c67x00_ll_irq ( struct c67x00_device * dev , u16 int_status ) ;
/* Setup and teardown */
void c67x00_ll_init ( struct c67x00_device * dev ) ;
void c67x00_ll_release ( struct c67x00_device * dev ) ;
int c67x00_ll_reset ( struct c67x00_device * dev ) ;
# endif /* _USB_C67X00_H */