iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/sound/pci/ca0106/ca0106_mixer.c

697 lines
24 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Copyright (c) 2004 James Courtier-Dutton <James@superbug.demon.co.uk>
* Driver CA0106 chips. e.g. Sound Blaster Audigy LS and Live 24bit
[ALSA] Add Mic capture support. CA0106 driver Notes: This adds a new mixer item to switch between Mic and Line-in. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-27 23:28:27 +02:00
* Version: 0.0.17
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*
* FEATURES currently supported:
* See ca0106_main.c for features.
*
* Changelog:
* Support interrupts per period.
* Removed noise from Center/LFE channel when in Analog mode.
* Rename and remove mixer controls.
* 0.0.6
* Use separate card based DMA buffer for periods table list.
* 0.0.7
* Change remove and rename ctrls into lists.
* 0.0.8
* Try to fix capture sources.
* 0.0.9
* Fix AC3 output.
* Enable S32_LE format support.
* 0.0.10
* Enable playback 48000 and 96000 rates. (Rates other that these do not work, even with "plug:front".)
* 0.0.11
* Add Model name recognition.
* 0.0.12
* Correct interrupt timing. interrupt at end of period, instead of in the middle of a playback period.
* Remove redundent "voice" handling.
* 0.0.13
* Single trigger call for multi channels.
* 0.0.14
* Set limits based on what the sound card hardware can do.
* playback periods_min=2, periods_max=8
* capture hw constraints require period_size = n * 64 bytes.
* playback hw constraints require period_size = n * 64 bytes.
* 0.0.15
* Separated ca0106.c into separate functional .c files.
* 0.0.16
* Modified Copyright message.
[ALSA] Add Mic capture support. CA0106 driver Notes: This adds a new mixer item to switch between Mic and Line-in. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-27 23:28:27 +02:00
* 0.0.17
* Implement Mic and Line in Capture.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*
* This code was initally based on code from ALSA's emu10k1x.c which is:
* Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <sound/driver.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
#include <sound/info.h>
#include "ca0106.h"
static int snd_ca0106_shared_spdif_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t * uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
uinfo->count = 1;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 1;
return 0;
}
static int snd_ca0106_shared_spdif_get(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
ca0106_t *emu = snd_kcontrol_chip(kcontrol);
ucontrol->value.enumerated.item[0] = emu->spdif_enable;
return 0;
}
static int snd_ca0106_shared_spdif_put(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
ca0106_t *emu = snd_kcontrol_chip(kcontrol);
unsigned int val;
int change = 0;
u32 mask;
val = ucontrol->value.enumerated.item[0] ;
change = (emu->spdif_enable != val);
if (change) {
emu->spdif_enable = val;
if (val == 1) {
/* Digital */
snd_ca0106_ptr_write(emu, SPDIF_SELECT1, 0, 0xf);
snd_ca0106_ptr_write(emu, SPDIF_SELECT2, 0, 0x0b000000);
snd_ca0106_ptr_write(emu, CAPTURE_CONTROL, 0,
snd_ca0106_ptr_read(emu, CAPTURE_CONTROL, 0) & ~0x1000);
mask = inl(emu->port + GPIO) & ~0x101;
outl(mask, emu->port + GPIO);
} else {
/* Analog */
snd_ca0106_ptr_write(emu, SPDIF_SELECT1, 0, 0xf);
[ALSA] Implement surround71 outputs on SB Live 24bit. CA0106 driver Notes: Requires updated alsa-lib. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-21 16:23:37 +02:00
snd_ca0106_ptr_write(emu, SPDIF_SELECT2, 0, 0x000f0000);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
snd_ca0106_ptr_write(emu, CAPTURE_CONTROL, 0,
snd_ca0106_ptr_read(emu, CAPTURE_CONTROL, 0) | 0x1000);
mask = inl(emu->port + GPIO) | 0x101;
outl(mask, emu->port + GPIO);
}
}
return change;
}
static snd_kcontrol_new_t snd_ca0106_shared_spdif __devinitdata =
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "SPDIF Out",
.info = snd_ca0106_shared_spdif_info,
.get = snd_ca0106_shared_spdif_get,
.put = snd_ca0106_shared_spdif_put
};
static int snd_ca0106_capture_source_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t * uinfo)
{
static char *texts[6] = { "SPDIF out", "i2s mixer out", "SPDIF in", "i2s in", "AC97 in", "SRC out" };
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
uinfo->count = 1;
uinfo->value.enumerated.items = 6;
if (uinfo->value.enumerated.item > 5)
uinfo->value.enumerated.item = 5;
strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
return 0;
}
static int snd_ca0106_capture_source_get(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
ca0106_t *emu = snd_kcontrol_chip(kcontrol);
ucontrol->value.enumerated.item[0] = emu->capture_source;
return 0;
}
static int snd_ca0106_capture_source_put(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
ca0106_t *emu = snd_kcontrol_chip(kcontrol);
unsigned int val;
int change = 0;
u32 mask;
u32 source;
val = ucontrol->value.enumerated.item[0] ;
change = (emu->capture_source != val);
if (change) {
emu->capture_source = val;
source = (val << 28) | (val << 24) | (val << 20) | (val << 16);
mask = snd_ca0106_ptr_read(emu, CAPTURE_SOURCE, 0) & 0xffff;
snd_ca0106_ptr_write(emu, CAPTURE_SOURCE, 0, source | mask);
}
return change;
}
static snd_kcontrol_new_t snd_ca0106_capture_source __devinitdata =
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Capture Source",
.info = snd_ca0106_capture_source_info,
.get = snd_ca0106_capture_source_get,
.put = snd_ca0106_capture_source_put
};
[ALSA] Add Mic capture support. CA0106 driver Notes: This adds a new mixer item to switch between Mic and Line-in. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-27 23:28:27 +02:00
static int snd_ca0106_capture_mic_line_in_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t * uinfo)
{
static char *texts[2] = { "Line in", "Mic in" };
uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
uinfo->count = 1;
uinfo->value.enumerated.items = 2;
if (uinfo->value.enumerated.item > 1)
uinfo->value.enumerated.item = 1;
strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
return 0;
}
static int snd_ca0106_capture_mic_line_in_get(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
ca0106_t *emu = snd_kcontrol_chip(kcontrol);
ucontrol->value.enumerated.item[0] = emu->capture_mic_line_in;
return 0;
}
static int snd_ca0106_capture_mic_line_in_put(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
ca0106_t *emu = snd_kcontrol_chip(kcontrol);
unsigned int val;
int change = 0;
u32 tmp;
val = ucontrol->value.enumerated.item[0] ;
change = (emu->capture_mic_line_in != val);
if (change) {
emu->capture_mic_line_in = val;
if (val) {
snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_PHONE); /* Mute input */
tmp = inl(emu->port+GPIO) & ~0x400;
tmp = tmp | 0x400;
outl(tmp, emu->port+GPIO);
snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_MIC);
} else {
snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_PHONE); /* Mute input */
tmp = inl(emu->port+GPIO) & ~0x400;
outl(tmp, emu->port+GPIO);
snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_LINEIN);
}
}
return change;
}
static snd_kcontrol_new_t snd_ca0106_capture_mic_line_in __devinitdata =
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Mic/Line in Capture",
.info = snd_ca0106_capture_mic_line_in_info,
.get = snd_ca0106_capture_mic_line_in_get,
.put = snd_ca0106_capture_mic_line_in_put
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
static int snd_ca0106_spdif_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t * uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
uinfo->count = 1;
return 0;
}
static int snd_ca0106_spdif_get(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
ca0106_t *emu = snd_kcontrol_chip(kcontrol);
unsigned int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
ucontrol->value.iec958.status[0] = (emu->spdif_bits[idx] >> 0) & 0xff;
ucontrol->value.iec958.status[1] = (emu->spdif_bits[idx] >> 8) & 0xff;
ucontrol->value.iec958.status[2] = (emu->spdif_bits[idx] >> 16) & 0xff;
ucontrol->value.iec958.status[3] = (emu->spdif_bits[idx] >> 24) & 0xff;
return 0;
}
static int snd_ca0106_spdif_get_mask(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
ucontrol->value.iec958.status[0] = 0xff;
ucontrol->value.iec958.status[1] = 0xff;
ucontrol->value.iec958.status[2] = 0xff;
ucontrol->value.iec958.status[3] = 0xff;
return 0;
}
static int snd_ca0106_spdif_put(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
ca0106_t *emu = snd_kcontrol_chip(kcontrol);
unsigned int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
int change;
unsigned int val;
val = (ucontrol->value.iec958.status[0] << 0) |
(ucontrol->value.iec958.status[1] << 8) |
(ucontrol->value.iec958.status[2] << 16) |
(ucontrol->value.iec958.status[3] << 24);
change = val != emu->spdif_bits[idx];
if (change) {
snd_ca0106_ptr_write(emu, SPCS0 + idx, 0, val);
emu->spdif_bits[idx] = val;
}
return change;
}
static snd_kcontrol_new_t snd_ca0106_spdif_mask_control =
{
.access = SNDRV_CTL_ELEM_ACCESS_READ,
[ALSA] use PCM interface for IEC958 controls Digigram VX core,ENS1370/1+ driver,CA0106 driver,EMU10K1/EMU10K2 driver RME HDSP driver,RME9652 driver For consistency, use the PCM interface instead of MIXER for IEC958 default/mask/stream mixer controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-03 13:50:30 +02:00
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,MASK),
.count = 4,
.info = snd_ca0106_spdif_info,
.get = snd_ca0106_spdif_get_mask
};
static snd_kcontrol_new_t snd_ca0106_spdif_control =
{
[ALSA] use PCM interface for IEC958 controls Digigram VX core,ENS1370/1+ driver,CA0106 driver,EMU10K1/EMU10K2 driver RME HDSP driver,RME9652 driver For consistency, use the PCM interface instead of MIXER for IEC958 default/mask/stream mixer controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-08-03 13:50:30 +02:00
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
.count = 4,
.info = snd_ca0106_spdif_info,
.get = snd_ca0106_spdif_get,
.put = snd_ca0106_spdif_put
};
static int snd_ca0106_volume_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t * uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = 2;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 255;
return 0;
}
static int snd_ca0106_volume_get(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol, int reg, int channel_id)
{
ca0106_t *emu = snd_kcontrol_chip(kcontrol);
unsigned int value;
value = snd_ca0106_ptr_read(emu, reg, channel_id);
ucontrol->value.integer.value[0] = 0xff - ((value >> 24) & 0xff); /* Left */
ucontrol->value.integer.value[1] = 0xff - ((value >> 16) & 0xff); /* Right */
return 0;
}
static int snd_ca0106_volume_get_spdif_front(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_FRONT_CHANNEL;
int reg = PLAYBACK_VOLUME1;
return snd_ca0106_volume_get(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_get_spdif_center_lfe(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_CENTER_LFE_CHANNEL;
int reg = PLAYBACK_VOLUME1;
return snd_ca0106_volume_get(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_get_spdif_unknown(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_UNKNOWN_CHANNEL;
int reg = PLAYBACK_VOLUME1;
return snd_ca0106_volume_get(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_get_spdif_rear(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_REAR_CHANNEL;
int reg = PLAYBACK_VOLUME1;
return snd_ca0106_volume_get(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_get_analog_front(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_FRONT_CHANNEL;
int reg = PLAYBACK_VOLUME2;
return snd_ca0106_volume_get(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_get_analog_center_lfe(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_CENTER_LFE_CHANNEL;
int reg = PLAYBACK_VOLUME2;
return snd_ca0106_volume_get(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_get_analog_unknown(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_UNKNOWN_CHANNEL;
int reg = PLAYBACK_VOLUME2;
return snd_ca0106_volume_get(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_get_analog_rear(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_REAR_CHANNEL;
int reg = PLAYBACK_VOLUME2;
return snd_ca0106_volume_get(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_get_feedback(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = 1;
int reg = CAPTURE_CONTROL;
return snd_ca0106_volume_get(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_put(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol, int reg, int channel_id)
{
ca0106_t *emu = snd_kcontrol_chip(kcontrol);
unsigned int value;
//value = snd_ca0106_ptr_read(emu, reg, channel_id);
//value = value & 0xffff;
value = ((0xff - ucontrol->value.integer.value[0]) << 24) | ((0xff - ucontrol->value.integer.value[1]) << 16);
value = value | ((0xff - ucontrol->value.integer.value[0]) << 8) | ((0xff - ucontrol->value.integer.value[1]) );
snd_ca0106_ptr_write(emu, reg, channel_id, value);
return 1;
}
static int snd_ca0106_volume_put_spdif_front(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_FRONT_CHANNEL;
int reg = PLAYBACK_VOLUME1;
return snd_ca0106_volume_put(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_put_spdif_center_lfe(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_CENTER_LFE_CHANNEL;
int reg = PLAYBACK_VOLUME1;
return snd_ca0106_volume_put(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_put_spdif_unknown(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_UNKNOWN_CHANNEL;
int reg = PLAYBACK_VOLUME1;
return snd_ca0106_volume_put(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_put_spdif_rear(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_REAR_CHANNEL;
int reg = PLAYBACK_VOLUME1;
return snd_ca0106_volume_put(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_put_analog_front(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_FRONT_CHANNEL;
int reg = PLAYBACK_VOLUME2;
return snd_ca0106_volume_put(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_put_analog_center_lfe(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_CENTER_LFE_CHANNEL;
int reg = PLAYBACK_VOLUME2;
return snd_ca0106_volume_put(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_put_analog_unknown(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_UNKNOWN_CHANNEL;
int reg = PLAYBACK_VOLUME2;
return snd_ca0106_volume_put(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_put_analog_rear(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = CONTROL_REAR_CHANNEL;
int reg = PLAYBACK_VOLUME2;
return snd_ca0106_volume_put(kcontrol, ucontrol, reg, channel_id);
}
static int snd_ca0106_volume_put_feedback(snd_kcontrol_t * kcontrol,
snd_ctl_elem_value_t * ucontrol)
{
int channel_id = 1;
int reg = CAPTURE_CONTROL;
return snd_ca0106_volume_put(kcontrol, ucontrol, reg, channel_id);
}
static snd_kcontrol_new_t snd_ca0106_volume_control_analog_front =
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
[ALSA] snd-ca0106: Tidy up volume controls CA0106 driver Playback volume controls were appearing in both the playback and capture displays of alsamixer. Now those playback controls only appear in the playback display. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-08-30 21:00:46 +02:00
.name = "Analog Front Playback Volume",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.info = snd_ca0106_volume_info,
.get = snd_ca0106_volume_get_analog_front,
.put = snd_ca0106_volume_put_analog_front
};
static snd_kcontrol_new_t snd_ca0106_volume_control_analog_center_lfe =
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
[ALSA] snd-ca0106: Tidy up volume controls CA0106 driver Playback volume controls were appearing in both the playback and capture displays of alsamixer. Now those playback controls only appear in the playback display. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-08-30 21:00:46 +02:00
.name = "Analog Center/LFE Playback Volume",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.info = snd_ca0106_volume_info,
.get = snd_ca0106_volume_get_analog_center_lfe,
.put = snd_ca0106_volume_put_analog_center_lfe
};
static snd_kcontrol_new_t snd_ca0106_volume_control_analog_unknown =
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
[ALSA] snd-ca0106: Tidy up volume controls CA0106 driver Playback volume controls were appearing in both the playback and capture displays of alsamixer. Now those playback controls only appear in the playback display. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-08-30 21:00:46 +02:00
.name = "Analog Side Playback Volume",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.info = snd_ca0106_volume_info,
.get = snd_ca0106_volume_get_analog_unknown,
.put = snd_ca0106_volume_put_analog_unknown
};
static snd_kcontrol_new_t snd_ca0106_volume_control_analog_rear =
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
[ALSA] snd-ca0106: Tidy up volume controls CA0106 driver Playback volume controls were appearing in both the playback and capture displays of alsamixer. Now those playback controls only appear in the playback display. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-08-30 21:00:46 +02:00
.name = "Analog Rear Playback Volume",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.info = snd_ca0106_volume_info,
.get = snd_ca0106_volume_get_analog_rear,
.put = snd_ca0106_volume_put_analog_rear
};
static snd_kcontrol_new_t snd_ca0106_volume_control_spdif_front =
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
[ALSA] snd-ca0106: Tidy up volume controls CA0106 driver Playback volume controls were appearing in both the playback and capture displays of alsamixer. Now those playback controls only appear in the playback display. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-08-30 21:00:46 +02:00
.name = "SPDIF Front Playback Volume",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.info = snd_ca0106_volume_info,
.get = snd_ca0106_volume_get_spdif_front,
.put = snd_ca0106_volume_put_spdif_front
};
static snd_kcontrol_new_t snd_ca0106_volume_control_spdif_center_lfe =
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
[ALSA] snd-ca0106: Tidy up volume controls CA0106 driver Playback volume controls were appearing in both the playback and capture displays of alsamixer. Now those playback controls only appear in the playback display. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-08-30 21:00:46 +02:00
.name = "SPDIF Center/LFE Playback Volume",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.info = snd_ca0106_volume_info,
.get = snd_ca0106_volume_get_spdif_center_lfe,
.put = snd_ca0106_volume_put_spdif_center_lfe
};
static snd_kcontrol_new_t snd_ca0106_volume_control_spdif_unknown =
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
[ALSA] snd-ca0106: Tidy up volume controls CA0106 driver Playback volume controls were appearing in both the playback and capture displays of alsamixer. Now those playback controls only appear in the playback display. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-08-30 21:00:46 +02:00
.name = "SPDIF Unknown Playback Volume",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.info = snd_ca0106_volume_info,
.get = snd_ca0106_volume_get_spdif_unknown,
.put = snd_ca0106_volume_put_spdif_unknown
};
static snd_kcontrol_new_t snd_ca0106_volume_control_spdif_rear =
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
[ALSA] snd-ca0106: Tidy up volume controls CA0106 driver Playback volume controls were appearing in both the playback and capture displays of alsamixer. Now those playback controls only appear in the playback display. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-08-30 21:00:46 +02:00
.name = "SPDIF Rear Playback Volume",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.info = snd_ca0106_volume_info,
.get = snd_ca0106_volume_get_spdif_rear,
.put = snd_ca0106_volume_put_spdif_rear
};
static snd_kcontrol_new_t snd_ca0106_volume_control_feedback =
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
[ALSA] snd-ca0106: Tidy up volume controls CA0106 driver Playback volume controls were appearing in both the playback and capture displays of alsamixer. Now those playback controls only appear in the playback display. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-08-30 21:00:46 +02:00
.name = "CAPTURE feedback Playback Volume",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.info = snd_ca0106_volume_info,
.get = snd_ca0106_volume_get_feedback,
.put = snd_ca0106_volume_put_feedback
};
static int remove_ctl(snd_card_t *card, const char *name)
{
snd_ctl_elem_id_t id;
memset(&id, 0, sizeof(id));
strcpy(id.name, name);
id.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
return snd_ctl_remove_id(card, &id);
}
static snd_kcontrol_t *ctl_find(snd_card_t *card, const char *name)
{
snd_ctl_elem_id_t sid;
memset(&sid, 0, sizeof(sid));
/* FIXME: strcpy is bad. */
strcpy(sid.name, name);
sid.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
return snd_ctl_find_id(card, &sid);
}
static int rename_ctl(snd_card_t *card, const char *src, const char *dst)
{
snd_kcontrol_t *kctl = ctl_find(card, src);
if (kctl) {
strcpy(kctl->id.name, dst);
return 0;
}
return -ENOENT;
}
int __devinit snd_ca0106_mixer(ca0106_t *emu)
{
int err;
snd_kcontrol_t *kctl;
snd_card_t *card = emu->card;
char **c;
static char *ca0106_remove_ctls[] = {
"Master Mono Playback Switch",
"Master Mono Playback Volume",
"3D Control - Switch",
"3D Control Sigmatel - Depth",
"PCM Playback Switch",
"PCM Playback Volume",
"CD Playback Switch",
"CD Playback Volume",
"Phone Playback Switch",
"Phone Playback Volume",
"Video Playback Switch",
"Video Playback Volume",
"PC Speaker Playback Switch",
"PC Speaker Playback Volume",
"Mono Output Select",
"Capture Source",
"Capture Switch",
"Capture Volume",
"External Amplifier",
"Sigmatel 4-Speaker Stereo Playback Switch",
"Sigmatel Surround Phase Inversion Playback ",
NULL
};
static char *ca0106_rename_ctls[] = {
"Master Playback Switch", "Capture Switch",
"Master Playback Volume", "Capture Volume",
"Line Playback Switch", "AC97 Line Capture Switch",
"Line Playback Volume", "AC97 Line Capture Volume",
"Aux Playback Switch", "AC97 Aux Capture Switch",
"Aux Playback Volume", "AC97 Aux Capture Volume",
"Mic Playback Switch", "AC97 Mic Capture Switch",
"Mic Playback Volume", "AC97 Mic Capture Volume",
"Mic Select", "AC97 Mic Select",
"Mic Boost (+20dB)", "AC97 Mic Boost (+20dB)",
NULL
};
#if 1
for (c=ca0106_remove_ctls; *c; c++)
remove_ctl(card, *c);
for (c=ca0106_rename_ctls; *c; c += 2)
rename_ctl(card, c[0], c[1]);
#endif
if ((kctl = snd_ctl_new1(&snd_ca0106_volume_control_analog_front, emu)) == NULL)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
if ((kctl = snd_ctl_new1(&snd_ca0106_volume_control_analog_rear, emu)) == NULL)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
if ((kctl = snd_ctl_new1(&snd_ca0106_volume_control_analog_center_lfe, emu)) == NULL)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
if ((kctl = snd_ctl_new1(&snd_ca0106_volume_control_analog_unknown, emu)) == NULL)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
if ((kctl = snd_ctl_new1(&snd_ca0106_volume_control_spdif_front, emu)) == NULL)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
if ((kctl = snd_ctl_new1(&snd_ca0106_volume_control_spdif_rear, emu)) == NULL)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
if ((kctl = snd_ctl_new1(&snd_ca0106_volume_control_spdif_center_lfe, emu)) == NULL)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
if ((kctl = snd_ctl_new1(&snd_ca0106_volume_control_spdif_unknown, emu)) == NULL)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
if ((kctl = snd_ctl_new1(&snd_ca0106_volume_control_feedback, emu)) == NULL)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
if ((kctl = snd_ctl_new1(&snd_ca0106_spdif_mask_control, emu)) == NULL)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
if ((kctl = snd_ctl_new1(&snd_ca0106_shared_spdif, emu)) == NULL)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
if ((kctl = snd_ctl_new1(&snd_ca0106_capture_source, emu)) == NULL)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
[ALSA] Add Mic capture support. CA0106 driver Notes: This adds a new mixer item to switch between Mic and Line-in. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-05-27 23:28:27 +02:00
if (emu->details->i2c_adc == 1) {
if ((kctl = snd_ctl_new1(&snd_ca0106_capture_mic_line_in, emu)) == NULL)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if ((kctl = snd_ctl_new1(&snd_ca0106_spdif_control, emu)) == NULL)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
return 0;
}
Reference in New Issue Copy Permalink