iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
ea54763f8a
linux/drivers/usb/Makefile

73 lines
2.0 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
# Makefile for the kernel USB device drivers.
#
# Object files in subdirectories
obj-$(CONFIG_USB) += core/
obj-$(CONFIG_USB_MON) += mon/
[PATCH] USB: move handoff code This moves the PCI quirk handling for USB host controllers from the PCI directory to the USB directory. Follow-on patches will need to: (a) merge these copies with the originals in the HCD reset methods. they don't wholly agree, despite doing the very same thing; and (b) eventually change it so "usb-handoff" is the default, to help get more robust USB/BIOS/input/... interactions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/Makefile | 2 drivers/pci/quirks.c | 253 --------------------------------------- drivers/usb/Makefile | 1 drivers/usb/host/Makefile | 5 drivers/usb/host/pci-quirks.c | 272 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 280 insertions(+), 253 deletions(-)
2005-09-24 04:14:37 +04:00
obj-$(CONFIG_PCI) += host/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_USB_EHCI_HCD) += host/
[PATCH] USB: Add isp116x-hcd USB host controller driver This patch provides an "isp116x-hcd" driver for Philips' ISP1160/ISP1161 USB host controllers. The driver: - is relatively small, meant for use on embedded platforms. - runs usbtests 1-14 without problems for days. - has been in use by 6-7 different people on ARM and PPC platforms, running a range of devices including USB hubs. - supports suspend/resume of both the platform device and the root hub; supports remote wakeup of the root hub (but NOT the platform device) by USB devices. - does NOT support ISO transfers (nobody has asked for them). - is PIO-only. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-09 23:57:39 +04:00
obj-$(CONFIG_USB_ISP116X_HCD) += host/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_USB_OHCI_HCD) += host/
obj-$(CONFIG_USB_UHCI_HCD) += host/
obj-$(CONFIG_USB_SL811_HCD) += host/
USB: u132-hcd: host controller driver for ELAN U132 adapter This "u132-hcd" module is one half of the "driver" for ELAN's U132 which is a USB to CardBus OHCI controller adapter. This module needs the "ftdi-elan" module in order to communicate to CardBus OHCI controller inserted into the U132 adapter. When the "ftdi-elan" module detects a supported CardBus OHCI controller in the U132 adapter it loads this "u132-hcd" module. Upon a successful device probe() the single workqueue is started up which does all the processing of commands from the USB core that implement the host controller. The workqueue maintains the urb queues and issues commands via the functions exported by the "ftdi-elan" module. Each such command will result in a callback. Note that the "ftdi-elan" module is a USB client driver. Note that this "u132-hcd" module is a (cut-down OHCI) host controller. Thus we have a topology with the parent of a host controller being a USB client! This really stresses the USB subsystem semaphore/mutex handling in the module removal. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-13 14:27:35 +04:00
obj-$(CONFIG_USB_U132_HCD) += host/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_ETRAX_USB_HOST) += host/
[PATCH] USB: add support for OCHI on AT91rm9200 This adds support for OHCI on AT91rm9200 based boards. Possibly of interest here is the way this uses <linux/clk.h> to gate clocks on/off during system pm state transitions. That's typical for non-PCI systems. Some can go further; Mini-A host side connectors enable ID-pin sensing. From: Andrew Victor <andrew@sanpeople.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-22 21:32:13 +03:00
obj-$(CONFIG_USB_OHCI_AT91) += host/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_USB_ACM) += class/
obj-$(CONFIG_USB_PRINTER) += class/
obj-$(CONFIG_USB_STORAGE) += storage/
[PATCH] USB: drivers/usb/storage/libusual This patch adds a shim driver libusual, which routes devices between usb-storage and ub according to the common table, based on unusual_devs.h. The help and example syntax is in Kconfig. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-23 07:15:09 +04:00
obj-$(CONFIG_USB) += storage/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: add PlayStation 2 Trance Vibrator driver This patch is a driver for the PlayStation 2 specific Trance Vibrator device. The only thing that device can do is vibrate at various speeds. Signed-off-by: Sam Hocevar <sam@zoy.org> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Luiz Fernando N. Capitulino" <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 04:34:56 +04:00
obj-$(CONFIG_USB_ACECAD) += input/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_USB_AIPTEK) += input/
obj-$(CONFIG_USB_ATI_REMOTE) += input/
obj-$(CONFIG_USB_HID) += input/
obj-$(CONFIG_USB_KBD) += input/
obj-$(CONFIG_USB_KBTAB) += input/
obj-$(CONFIG_USB_MOUSE) += input/
obj-$(CONFIG_USB_MTOUCH) += input/
obj-$(CONFIG_USB_POWERMATE) += input/
obj-$(CONFIG_USB_WACOM) += input/
obj-$(CONFIG_USB_XPAD) += input/
obj-$(CONFIG_USB_CATC) += net/
obj-$(CONFIG_USB_KAWETH) += net/
obj-$(CONFIG_USB_PEGASUS) += net/
obj-$(CONFIG_USB_RTL8150) += net/
obj-$(CONFIG_USB_USBNET) += net/
obj-$(CONFIG_USB_ZD1201) += net/
obj-$(CONFIG_USB_MDC800) += image/
obj-$(CONFIG_USB_MICROTEK) += image/
obj-$(CONFIG_USB_SERIAL) += serial/
USB: ftdi-elan: client driver for ELAN Uxxx adapters This "ftdi-elan" module is one half of the "driver" for ELAN's Uxxx series adapters which are USB to PCMCIA CardBus adapters. Currently only the U132 adapter is available and it's module is called "u132-hcd". When the USB hot plug subsystem detects a Uxxx series adapter it should load this module. Upon a successful device probe() the jtag device file interface is created and the status workqueue started up. The jtag device file interface exists for the purpose of updating the firmware in the Uxxx series adapter, but as yet it had never been used. The status workqueue initializes the Uxxx and then sits there polling the Uxxx until a supported PCMCIA CardBus device is detected it will start the command and respond workqueues and then load the module that handles the device. This will initially be only the u132-hcd module. The status workqueue then just polls the Uxxx looking for card ejects. The command and respond workqueues implement a command sequencer for communicating with the firmware on the other side of the FTDI chip in the Uxxx. This "ftdi-elan" module exports some functions to interface with the sequencer. Note that this module is a USB client driver. Note that the "u132-hcd" module is a (cut-down OHCI) host controller. Thus we have a topology with the parent of a host controller being a USB client! This really stresses the USB subsystem semaphore/mutex handling in the module removal. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-13 14:26:04 +04:00
obj-$(CONFIG_USB_ADUTUX) += misc/
obj-$(CONFIG_USB_APPLEDISPLAY) += misc/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_USB_AUERSWALD) += misc/
[PATCH] USB: rename Cypress CY7C63xxx driver to proper name and fix up some tiny things This is a new driver for the Cypress CY7C63xxx mirco controller series. It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I ported to kernel 2.6 using sysfs. I intend to support more controllers of this family (and more features) as soon as I get hold of the required IDs etc. Please see the source code's header for more information. Signed-off-by: Oliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 21:04:47 +04:00
obj-$(CONFIG_USB_CYPRESS_CY7C63)+= misc/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_USB_CYTHERM) += misc/
obj-$(CONFIG_USB_EMI26) += misc/
obj-$(CONFIG_USB_EMI62) += misc/
USB: ftdi-elan: client driver for ELAN Uxxx adapters This "ftdi-elan" module is one half of the "driver" for ELAN's Uxxx series adapters which are USB to PCMCIA CardBus adapters. Currently only the U132 adapter is available and it's module is called "u132-hcd". When the USB hot plug subsystem detects a Uxxx series adapter it should load this module. Upon a successful device probe() the jtag device file interface is created and the status workqueue started up. The jtag device file interface exists for the purpose of updating the firmware in the Uxxx series adapter, but as yet it had never been used. The status workqueue initializes the Uxxx and then sits there polling the Uxxx until a supported PCMCIA CardBus device is detected it will start the command and respond workqueues and then load the module that handles the device. This will initially be only the u132-hcd module. The status workqueue then just polls the Uxxx looking for card ejects. The command and respond workqueues implement a command sequencer for communicating with the firmware on the other side of the FTDI chip in the Uxxx. This "ftdi-elan" module exports some functions to interface with the sequencer. Note that this module is a USB client driver. Note that the "u132-hcd" module is a (cut-down OHCI) host controller. Thus we have a topology with the parent of a host controller being a USB client! This really stresses the USB subsystem semaphore/mutex handling in the module removal. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-13 14:26:04 +04:00
obj-$(CONFIG_USB_FTDI_ELAN) += misc/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_USB_IDMOUSE) += misc/
obj-$(CONFIG_USB_LCD) += misc/
[PATCH] USB: add ldusb driver The following driver provides complete interrupt-in and interrupt-out reports (raw data) to a user program. Until now it uses the HIDIOCGDEVINFO ioctl call, because I don't know better :-(. Perhaps, it will be ok for you - and I will be happy, if you assign 8 minor numbers. I have tested it in several environments and it works very well for me. However, it has a problem with two or more devices at the same hub, if the two or more devices need 1 ms interrupt-in transfers. Unfortunately more than one interrupt-in transfer every ms isn't possible (ehci driver?). This is why the min_interrupt_in_interval and min_interrupt_out_interval are increased to 2 ms (see the corresponding module parameters). This way, I can use two devices simultaneously at the same hub. Signed-off-by: Michael Hund <mhund@ld-didactic.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-28 00:44:22 +04:00
obj-$(CONFIG_USB_LD) += misc/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_USB_LED) += misc/
obj-$(CONFIG_USB_LEGOTOWER) += misc/
USB: ftdi-elan: client driver for ELAN Uxxx adapters This "ftdi-elan" module is one half of the "driver" for ELAN's Uxxx series adapters which are USB to PCMCIA CardBus adapters. Currently only the U132 adapter is available and it's module is called "u132-hcd". When the USB hot plug subsystem detects a Uxxx series adapter it should load this module. Upon a successful device probe() the jtag device file interface is created and the status workqueue started up. The jtag device file interface exists for the purpose of updating the firmware in the Uxxx series adapter, but as yet it had never been used. The status workqueue initializes the Uxxx and then sits there polling the Uxxx until a supported PCMCIA CardBus device is detected it will start the command and respond workqueues and then load the module that handles the device. This will initially be only the u132-hcd module. The status workqueue then just polls the Uxxx looking for card ejects. The command and respond workqueues implement a command sequencer for communicating with the firmware on the other side of the FTDI chip in the Uxxx. This "ftdi-elan" module exports some functions to interface with the sequencer. Note that this module is a USB client driver. Note that the "u132-hcd" module is a (cut-down OHCI) host controller. Thus we have a topology with the parent of a host controller being a USB client! This really stresses the USB subsystem semaphore/mutex handling in the module removal. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-13 14:26:04 +04:00
obj-$(CONFIG_USB_PHIDGETSERVO) += misc/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_USB_RIO500) += misc/
USB: ftdi-elan: client driver for ELAN Uxxx adapters This "ftdi-elan" module is one half of the "driver" for ELAN's Uxxx series adapters which are USB to PCMCIA CardBus adapters. Currently only the U132 adapter is available and it's module is called "u132-hcd". When the USB hot plug subsystem detects a Uxxx series adapter it should load this module. Upon a successful device probe() the jtag device file interface is created and the status workqueue started up. The jtag device file interface exists for the purpose of updating the firmware in the Uxxx series adapter, but as yet it had never been used. The status workqueue initializes the Uxxx and then sits there polling the Uxxx until a supported PCMCIA CardBus device is detected it will start the command and respond workqueues and then load the module that handles the device. This will initially be only the u132-hcd module. The status workqueue then just polls the Uxxx looking for card ejects. The command and respond workqueues implement a command sequencer for communicating with the firmware on the other side of the FTDI chip in the Uxxx. This "ftdi-elan" module exports some functions to interface with the sequencer. Note that this module is a USB client driver. Note that the "u132-hcd" module is a (cut-down OHCI) host controller. Thus we have a topology with the parent of a host controller being a USB client! This really stresses the USB subsystem semaphore/mutex handling in the module removal. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-13 14:26:04 +04:00
obj-$(CONFIG_USB_SISUSBVGA) += misc/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_USB_TEST) += misc/
USB: move trancevibrator.c to the proper usb directory It's not a input driver, so it doesn't belong in the input directory. Cc: Sam Hocevar <sam@zoy.org> Cc: Dmitry Torokhov <dtor@insightbb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-11 00:47:35 +04:00
obj-$(CONFIG_USB_TRANCEVIBRATOR)+= misc/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_USB_USS720) += misc/
obj-$(CONFIG_USB_ATM) += atm/
obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
Reference in New Issue Copy Permalink