License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
/* SPDX-License-Identifier: GPL-2.0 */
2005-09-17 10:39:46 -05:00
# ifndef _ASM_POWERPC_SECTIONS_H
# define _ASM_POWERPC_SECTIONS_H
2005-12-16 22:43:46 +01:00
# ifdef __KERNEL__
2005-04-16 15:20:36 -07:00
2008-09-09 14:04:18 +00:00
# include <linux/elf.h>
# include <linux/uaccess.h>
2019-11-27 18:41:26 +11:00
2022-02-15 13:41:03 +01:00
# ifdef CONFIG_HAVE_FUNCTION_DESCRIPTORS
typedef struct func_desc func_desc_t ;
# endif
2005-04-16 15:20:36 -07:00
# include <asm-generic/sections.h>
2017-04-19 20:59:51 +05:30
extern char __head_end [ ] ;
2022-09-16 14:41:24 +10:00
extern char __srwx_boundary [ ] ;
2017-04-19 20:59:51 +05:30
2022-08-18 15:06:59 +10:00
/* Patch sites */
extern s32 patch__call_flush_branch_caches1 ;
extern s32 patch__call_flush_branch_caches2 ;
extern s32 patch__call_flush_branch_caches3 ;
extern s32 patch__flush_count_cache_return ;
extern s32 patch__flush_link_stack_return ;
extern s32 patch__call_kvm_flush_link_stack ;
extern s32 patch__call_kvm_flush_link_stack_p9 ;
extern s32 patch__memset_nocache , patch__memcpy_nocache ;
extern long flush_branch_caches ;
extern long kvm_flush_link_stack ;
2005-09-17 10:39:46 -05:00
# ifdef __powerpc64__
2005-04-16 15:20:36 -07:00
2014-01-31 00:31:04 +05:30
extern char __start_interrupts [ ] ;
2011-11-14 12:54:47 +00:00
extern char __end_interrupts [ ] ;
2005-04-16 15:20:36 -07:00
2019-03-01 22:56:36 +10:00
# ifdef CONFIG_PPC_POWERNV
extern char start_real_trampolines [ ] ;
extern char end_real_trampolines [ ] ;
extern char start_virt_trampolines [ ] ;
extern char end_virt_trampolines [ ] ;
# endif
powerpc/toc: Future proof kernel toc
This patch future-proofs the kernel against linker changes that might
put the toc pointer at some location other than .got+0x8000, by
replacing __toc_start+0x8000 with .TOC. throughout. If the kernel's
idea of the toc pointer doesn't agree with the linker, bad things
happen.
prom_init.c code relocating its toc is also changed so that a symbolic
__prom_init_toc_start toc-pointer relative address is calculated
rather than assuming that it is always at toc-pointer - 0x8000. The
length calculations loading values from the toc are also avoided.
It's a little incestuous to do that with unreloc_toc picking up
adjusted values (which is fine in practice, they both adjust by the
same amount if all goes well).
I've also changed the way .got is aligned in vmlinux.lds and
zImage.lds, mostly so that dumping out section info by objdump or
readelf plainly shows the alignment is 256. This linker script
feature was added 2005-09-27, available in FSF binutils releases from
2.17 onwards. Should be safe to use in the kernel, I think.
Finally, put *(.got) before the prom_init.o entry which only needs
*(.toc), so that the GOT header goes in the correct place. I don't
believe this makes any difference for the kernel as it would for
dynamic objects being loaded by ld.so. That change is just to stop
lusers who blindly copy kernel scripts being led astray. Of course,
this change needs the prom_init.c changes.
Some notes on .toc and .got.
.toc is a compiler generated section of addresses. .got is a linker
generated section of addresses, generally built when the linker sees
R_*_*GOT* relocations. In the case of powerpc64 ld.bfd, there are
multiple generated .got sections, one per input object file. So you
can somewhat reasonably write in a linker script an input section
statement like *prom_init.o(.got .toc) to mean "the .got and .toc
section for files matching *prom_init.o". On other architectures that
doesn't make sense, because the linker generally has just one .got
section. Even on powerpc64, note well that the GOT entries for
prom_init.o may be merged with GOT entries from other objects. That
means that if prom_init.o references, say, _end via some GOT
relocation, and some other object also references _end via a GOT
relocation, the GOT entry for _end may be in the range
__prom_init_toc_start to __prom_init_toc_end and if the kernel does
something special to GOT/TOC entries in that range then the value of
_end as seen by objects other than prom_init.o will be affected. On
the other hand the GOT entry for _end may not be in the range
__prom_init_toc_start to __prom_init_toc_end. Which way it turns out
is deterministic but a detail of linker operation that should not be
relied on.
A feature of ld.bfd is that input .toc (and .got) sections matching
one linker input section statement may be sorted, to put entries used
by small-model code first, near the toc base. This is why scripts for
powerpc64 normally use *(.got .toc) rather than *(.got) *(.toc), since
the first form allows more freedom to sort.
Another feature of ld.bfd is that indirect addressing sequences using
the GOT/TOC may be edited by the linker to relative addressing. In
many cases relative addressing would be emitted by gcc for
-mcmodel=medium if you appropriately decorate variable declarations
with non-default visibility.
The original patch is here:
https://lore.kernel.org/linuxppc-dev/20210310034813.GM6042@bubble.grove.modra.org/
Signed-off-by: Alan Modra <amodra@au1.ibm.com>
[aik: removed non-relocatable which is gone in 24d33ac5b8ffb]
[aik: added <=2.24 check]
[aik: because of llvm-as, kernel_toc_addr() uses "mr" instead of global register variable]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221055904.555763-2-aik@ozlabs.ru
2021-12-21 16:58:59 +11:00
/*
* This assumes the kernel is never compiled - mcmodel = small or
* the total . toc is always less than 64 k .
*/
2016-03-03 15:26:53 +11:00
static inline unsigned long kernel_toc_addr ( void )
{
2023-04-08 12:17:51 +10:00
# ifdef CONFIG_PPC_KERNEL_PCREL
BUILD_BUG ( ) ;
return - 1UL ;
# else
powerpc/toc: Future proof kernel toc
This patch future-proofs the kernel against linker changes that might
put the toc pointer at some location other than .got+0x8000, by
replacing __toc_start+0x8000 with .TOC. throughout. If the kernel's
idea of the toc pointer doesn't agree with the linker, bad things
happen.
prom_init.c code relocating its toc is also changed so that a symbolic
__prom_init_toc_start toc-pointer relative address is calculated
rather than assuming that it is always at toc-pointer - 0x8000. The
length calculations loading values from the toc are also avoided.
It's a little incestuous to do that with unreloc_toc picking up
adjusted values (which is fine in practice, they both adjust by the
same amount if all goes well).
I've also changed the way .got is aligned in vmlinux.lds and
zImage.lds, mostly so that dumping out section info by objdump or
readelf plainly shows the alignment is 256. This linker script
feature was added 2005-09-27, available in FSF binutils releases from
2.17 onwards. Should be safe to use in the kernel, I think.
Finally, put *(.got) before the prom_init.o entry which only needs
*(.toc), so that the GOT header goes in the correct place. I don't
believe this makes any difference for the kernel as it would for
dynamic objects being loaded by ld.so. That change is just to stop
lusers who blindly copy kernel scripts being led astray. Of course,
this change needs the prom_init.c changes.
Some notes on .toc and .got.
.toc is a compiler generated section of addresses. .got is a linker
generated section of addresses, generally built when the linker sees
R_*_*GOT* relocations. In the case of powerpc64 ld.bfd, there are
multiple generated .got sections, one per input object file. So you
can somewhat reasonably write in a linker script an input section
statement like *prom_init.o(.got .toc) to mean "the .got and .toc
section for files matching *prom_init.o". On other architectures that
doesn't make sense, because the linker generally has just one .got
section. Even on powerpc64, note well that the GOT entries for
prom_init.o may be merged with GOT entries from other objects. That
means that if prom_init.o references, say, _end via some GOT
relocation, and some other object also references _end via a GOT
relocation, the GOT entry for _end may be in the range
__prom_init_toc_start to __prom_init_toc_end and if the kernel does
something special to GOT/TOC entries in that range then the value of
_end as seen by objects other than prom_init.o will be affected. On
the other hand the GOT entry for _end may not be in the range
__prom_init_toc_start to __prom_init_toc_end. Which way it turns out
is deterministic but a detail of linker operation that should not be
relied on.
A feature of ld.bfd is that input .toc (and .got) sections matching
one linker input section statement may be sorted, to put entries used
by small-model code first, near the toc base. This is why scripts for
powerpc64 normally use *(.got .toc) rather than *(.got) *(.toc), since
the first form allows more freedom to sort.
Another feature of ld.bfd is that indirect addressing sequences using
the GOT/TOC may be edited by the linker to relative addressing. In
many cases relative addressing would be emitted by gcc for
-mcmodel=medium if you appropriately decorate variable declarations
with non-default visibility.
The original patch is here:
https://lore.kernel.org/linuxppc-dev/20210310034813.GM6042@bubble.grove.modra.org/
Signed-off-by: Alan Modra <amodra@au1.ibm.com>
[aik: removed non-relocatable which is gone in 24d33ac5b8ffb]
[aik: added <=2.24 check]
[aik: because of llvm-as, kernel_toc_addr() uses "mr" instead of global register variable]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221055904.555763-2-aik@ozlabs.ru
2021-12-21 16:58:59 +11:00
unsigned long toc_ptr ;
asm volatile ( " mr %0, 2 " : " =r " ( toc_ptr ) ) ;
return toc_ptr ;
2023-04-08 12:17:51 +10:00
# endif
2016-03-03 15:26:53 +11:00
}
2014-01-31 00:31:04 +05:30
static inline int overlaps_interrupt_vector_text ( unsigned long start ,
unsigned long end )
{
unsigned long real_start , real_end ;
real_start = __start_interrupts - _stext ;
real_end = __end_interrupts - _stext ;
return start < ( unsigned long ) __va ( real_end ) & &
( unsigned long ) __va ( real_start ) < end ;
}
powerpc: Make the 64-bit kernel as a position-independent executable
This implements CONFIG_RELOCATABLE for 64-bit by making the kernel as
a position-independent executable (PIE) when it is set. This involves
processing the dynamic relocations in the image in the early stages of
booting, even if the kernel is being run at the address it is linked at,
since the linker does not necessarily fill in words in the image for
which there are dynamic relocations. (In fact the linker does fill in
such words for 64-bit executables, though not for 32-bit executables,
so in principle we could avoid calling relocate() entirely when we're
running a 64-bit kernel at the linked address.)
The dynamic relocations are processed by a new function relocate(addr),
where the addr parameter is the virtual address where the image will be
run. In fact we call it twice; once before calling prom_init, and again
when starting the main kernel. This means that reloc_offset() returns
0 in prom_init (since it has been relocated to the address it is running
at), which necessitated a few adjustments.
This also changes __va and __pa to use an equivalent definition that is
simpler. With the relocatable kernel, PAGE_OFFSET and MEMORY_START are
constants (for 64-bit) whereas PHYSICAL_START is a variable (and
KERNELBASE ideally should be too, but isn't yet).
With this, relocatable kernels still copy themselves down to physical
address 0 and run there.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-30 11:43:47 +10:00
static inline int overlaps_kernel_text ( unsigned long start , unsigned long end )
{
return start < ( unsigned long ) __init_end & &
( unsigned long ) _stext < end ;
}
2023-06-19 15:17:24 +05:30
# else
static inline unsigned long kernel_toc_addr ( void ) { BUILD_BUG ( ) ; return - 1UL ; }
2005-04-16 15:20:36 -07:00
# endif
2005-09-17 10:39:46 -05:00
2005-12-16 22:43:46 +01:00
# endif /* __KERNEL__ */
2005-09-17 10:39:46 -05:00
# endif /* _ASM_POWERPC_SECTIONS_H */
