iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/infiniband/hw/mthca/mthca_main.c

1356 lines
36 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* Copyright (c) 2004, 2005 Topspin Communications. All rights reserved.
[PATCH] IB/mthca: Add Sun copyright notice Add Sun copyright to files modified by Tom Duffy. Signed-off-by: Tom Duffy <tduffy@sun.com> Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:36:37 -07:00
* Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
[PATCH] IB: Add copyright notices Make some lawyers happy and add copyright notices for people who forgot to include them when they actually touched the code. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-10 23:03:10 -07:00
* Copyright (c) 2005 Mellanox Technologies. All rights reserved.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include "mthca_dev.h"
#include "mthca_config_reg.h"
#include "mthca_cmd.h"
#include "mthca_profile.h"
#include "mthca_memfree.h"
IB/mthca: Fix max_sge value returned by query_device The mthca driver returns the maximum number of scatter/gather entries returned by the firmware as the max_sge value when device properties are queried. However, the firmware also reports a limit on the maximum descriptor size allowed, and because mthca takes into account the worst case send request overhead when checking whether to allow a QP to be created, the largest number of scatter/gather entries that can be used with mthca may be limited by the maximum descriptor size rather than just by the actual s/g entry limit. This means that applications cannot actually create QPs with max_send_sge equal to the limit returned by ib_query_device(). Fix this by checking if the maximum descriptor size imposes a lower limit and if so returning that lower limit. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-16 14:58:44 -07:00
#include "mthca_wqe.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
MODULE_AUTHOR("Roland Dreier");
MODULE_DESCRIPTION("Mellanox InfiniBand HCA low-level driver");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(DRV_VERSION);
IB/mthca: Always build debugging code unless CONFIG_EMBEDDED=y Change the mthca debugging trace output code so that it can enabled and disabled at runtime with the debug_level module parameter in sysfs. Also, don't allow CONFIG_INFINIBAND_MTHCA_DEBUG to be disabled unless CONFIG_EMBEDDED is selected. We want users (and especially distros) to have this turned on unless they really need to save space, because by the time we want debugging output, it's usually too late to rebuild a kernel. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-02 14:39:20 -07:00
#ifdef CONFIG_INFINIBAND_MTHCA_DEBUG
int mthca_debug_level = 0;
module_param_named(debug_level, mthca_debug_level, int, 0644);
MODULE_PARM_DESC(debug_level, "Enable debug tracing if > 0");
#endif /* CONFIG_INFINIBAND_MTHCA_DEBUG */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
#ifdef CONFIG_PCI_MSI
IB/mthca: Enable MSI-X by default Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07 16:10:34 +03:00
static int msi_x = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
module_param(msi_x, int, 0444);
MODULE_PARM_DESC(msi_x, "attempt to use MSI-X if nonzero");
#else /* CONFIG_PCI_MSI */
#define msi_x (0)
#endif /* CONFIG_PCI_MSI */
IB/mthca: Disable tuning PCI read burst size The PCI spec recommends against drivers playing with a device's PCI read burst size, and says that systems software should configure it. And we actually have users that report that changing it from the default set by BIOS hurts performance and/or stability for them. On the other hand, the Mellanox Programmer's Reference Manual recommends turning it up all the way to the maximum value. Some tests conducted here in the lab do not show performance improvement from this tuning, but this might be just me. As a work-around, make this tuning an option, off by default (safe value), with an eye towards removing it completely one day if no one complains. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-05 15:47:16 +03:00
static int tune_pci = 0;
module_param(tune_pci, int, 0444);
MODULE_PARM_DESC(tune_pci, "increase PCI burst from the default set by BIOS if nonzero");
IB/mthca: Use DEFINE_MUTEX() instead of mutex_init() mthca_device_mutex() can be initialized automatically with DEFINE_MUTEX() rather than explicitly calling mutex_init(). This saves a bit of text and shrinks the source by a line, so we may as well do it.... Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-15 20:55:28 -08:00
DEFINE_MUTEX(mthca_device_mutex);
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
IB/mthca: Add HCA profile module parameters Add module parameters that enable settting some of the HCA profile values, such as the number of QPs, CQs, etc. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-10 13:40:17 +02:00
#define MTHCA_DEFAULT_NUM_QP (1 << 16)
#define MTHCA_DEFAULT_RDB_PER_QP (1 << 2)
#define MTHCA_DEFAULT_NUM_CQ (1 << 16)
#define MTHCA_DEFAULT_NUM_MCG (1 << 13)
#define MTHCA_DEFAULT_NUM_MPT (1 << 17)
#define MTHCA_DEFAULT_NUM_MTT (1 << 20)
#define MTHCA_DEFAULT_NUM_UDAV (1 << 15)
#define MTHCA_DEFAULT_NUM_RESERVED_MTTS (1 << 18)
#define MTHCA_DEFAULT_NUM_UARC_SIZE (1 << 18)
static struct mthca_profile hca_profile = {
.num_qp = MTHCA_DEFAULT_NUM_QP,
.rdb_per_qp = MTHCA_DEFAULT_RDB_PER_QP,
.num_cq = MTHCA_DEFAULT_NUM_CQ,
.num_mcg = MTHCA_DEFAULT_NUM_MCG,
.num_mpt = MTHCA_DEFAULT_NUM_MPT,
.num_mtt = MTHCA_DEFAULT_NUM_MTT,
.num_udav = MTHCA_DEFAULT_NUM_UDAV, /* Tavor only */
.fmr_reserved_mtts = MTHCA_DEFAULT_NUM_RESERVED_MTTS, /* Tavor only */
.uarc_size = MTHCA_DEFAULT_NUM_UARC_SIZE, /* Arbel only */
};
module_param_named(num_qp, hca_profile.num_qp, int, 0444);
MODULE_PARM_DESC(num_qp, "maximum number of QPs per HCA");
module_param_named(rdb_per_qp, hca_profile.rdb_per_qp, int, 0444);
MODULE_PARM_DESC(rdb_per_qp, "number of RDB buffers per QP");
module_param_named(num_cq, hca_profile.num_cq, int, 0444);
MODULE_PARM_DESC(num_cq, "maximum number of CQs per HCA");
module_param_named(num_mcg, hca_profile.num_mcg, int, 0444);
MODULE_PARM_DESC(num_mcg, "maximum number of multicast groups per HCA");
module_param_named(num_mpt, hca_profile.num_mpt, int, 0444);
MODULE_PARM_DESC(num_mpt,
"maximum number of memory protection table entries per HCA");
module_param_named(num_mtt, hca_profile.num_mtt, int, 0444);
MODULE_PARM_DESC(num_mtt,
"maximum number of memory translation table segments per HCA");
module_param_named(num_udav, hca_profile.num_udav, int, 0444);
MODULE_PARM_DESC(num_udav, "maximum number of UD address vectors per HCA");
module_param_named(fmr_reserved_mtts, hca_profile.fmr_reserved_mtts, int, 0444);
MODULE_PARM_DESC(fmr_reserved_mtts,
"number of memory translation table segments reserved for FMR");
IB/mthca: Add module parameter for number of MTTs per segment The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27 14:36:16 -07:00
static int log_mtts_per_seg = ilog2(MTHCA_MTT_SEG_SIZE / 8);
module_param_named(log_mtts_per_seg, log_mtts_per_seg, int, 0444);
MODULE_PARM_DESC(log_mtts_per_seg, "Log2 number of MTT entries per segment (1-5)");
IB: Avoid marking __devinitdata as const Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04 20:20:44 -08:00
static char mthca_version[] __devinitdata =
[PATCH] IB/mthca: Clean up error messages - Fix incorrect cut-n-paste in error messages. - Add missing newlines in error messages. - Use DRV_NAME instead of "ib_mthca" in a couple of places. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:36:39 -07:00
DRV_NAME ": Mellanox InfiniBand HCA driver v"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
DRV_VERSION " (" DRV_RELDATE ")\n";
IB/mthca: Fix section mismatches Commit b3b30f5e ("IB/mthca: Recover from catastrophic errors") introduced some section mismatch breakage, because the error recovery code tears down and reinitializes the device, which calls into lots of code originally marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Reported by Randy Dunlap <randy.dunlap@oracle.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:06 -08:00
static int mthca_tune_pci(struct mthca_dev *mdev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
IB/mthca: Disable tuning PCI read burst size The PCI spec recommends against drivers playing with a device's PCI read burst size, and says that systems software should configure it. And we actually have users that report that changing it from the default set by BIOS hurts performance and/or stability for them. On the other hand, the Mellanox Programmer's Reference Manual recommends turning it up all the way to the maximum value. Some tests conducted here in the lab do not show performance improvement from this tuning, but this might be just me. As a work-around, make this tuning an option, off by default (safe value), with an eye towards removing it completely one day if no one complains. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-05 15:47:16 +03:00
if (!tune_pci)
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* First try to max out Read Byte Count */
IB/mthca: Use PCI-X/PCI-Express read control interfaces These driver changes incorporate the proposed PCI-X / PCI-Express read byte count interface. Reading and setting those values doesn't take place "manually", instead wrapping functions are called to allow quirks for some PCI bridges. Signed-off by: Peter Oruba <peter.oruba@amd.com> Based on work by Stephen Hemminger <shemminger@linux-foundation.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-10 13:54:33 -07:00
if (pci_find_capability(mdev->pdev, PCI_CAP_ID_PCIX)) {
if (pcix_set_mmrbc(mdev->pdev, pcix_get_max_mmrbc(mdev->pdev))) {
mthca_err(mdev, "Couldn't set PCI-X max read count, "
"aborting.\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return -ENODEV;
}
[PATCH] IB/mthca: add support for new MT25204 HCA Decouple table of HCA features from exact HCA device type. Add a current FW version field so we can warn when someone is using old FW. Add support for new MT25204 HCA. Remove the warning about mem-free support, since it should be pretty solid at this point. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:34 -07:00
} else if (!(mdev->mthca_flags & MTHCA_FLAG_PCIE))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mthca_info(mdev, "No PCI-X capability, not setting RBC.\n");
IB/mthca: Use PCI-X/PCI-Express read control interfaces These driver changes incorporate the proposed PCI-X / PCI-Express read byte count interface. Reading and setting those values doesn't take place "manually", instead wrapping functions are called to allow quirks for some PCI bridges. Signed-off by: Peter Oruba <peter.oruba@amd.com> Based on work by Stephen Hemminger <shemminger@linux-foundation.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-10 13:54:33 -07:00
if (pci_find_capability(mdev->pdev, PCI_CAP_ID_EXP)) {
if (pcie_set_readrq(mdev->pdev, 4096)) {
mthca_err(mdev, "Couldn't write PCI Express read request, "
"aborting.\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return -ENODEV;
}
[PATCH] IB/mthca: add support for new MT25204 HCA Decouple table of HCA features from exact HCA device type. Add a current FW version field so we can warn when someone is using old FW. Add support for new MT25204 HCA. Remove the warning about mem-free support, since it should be pretty solid at this point. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:34 -07:00
} else if (mdev->mthca_flags & MTHCA_FLAG_PCIE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mthca_info(mdev, "No PCI Express capability, "
"not setting Max Read Request Size.\n");
return 0;
}
IB/mthca: Fix section mismatches Commit b3b30f5e ("IB/mthca: Recover from catastrophic errors") introduced some section mismatch breakage, because the error recovery code tears down and reinitializes the device, which calls into lots of code originally marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Reported by Randy Dunlap <randy.dunlap@oracle.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:06 -08:00
static int mthca_dev_lim(struct mthca_dev *mdev, struct mthca_dev_lim *dev_lim)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
int err;
u8 status;
IB/mthca: Add module parameter for number of MTTs per segment The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27 14:36:16 -07:00
mdev->limits.mtt_seg_size = (1 << log_mtts_per_seg) * 8;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err = mthca_QUERY_DEV_LIM(mdev, dev_lim, &status);
if (err) {
mthca_err(mdev, "QUERY_DEV_LIM command failed, aborting.\n");
return err;
}
if (status) {
mthca_err(mdev, "QUERY_DEV_LIM returned status 0x%02x, "
"aborting.\n", status);
return -EINVAL;
}
if (dev_lim->min_page_sz > PAGE_SIZE) {
mthca_err(mdev, "HCA minimum page size of %d bigger than "
"kernel PAGE_SIZE of %ld, aborting.\n",
dev_lim->min_page_sz, PAGE_SIZE);
return -ENODEV;
}
if (dev_lim->num_ports > MTHCA_MAX_PORTS) {
mthca_err(mdev, "HCA has %d ports, but we only support %d, "
"aborting.\n",
dev_lim->num_ports, MTHCA_MAX_PORTS);
return -ENODEV;
}
IB/mthca: Relax UAR size check There are some cards around that have UAR (user access region) size different from 8 MB. Relax our sanity check to make sure that the PCI BAR is big enough to access the UAR size reported by the device firmware instead. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30 15:20:35 -08:00
if (dev_lim->uar_size > pci_resource_len(mdev->pdev, 2)) {
mthca_err(mdev, "HCA reported UAR size of 0x%x bigger than "
[PATCH] 64bit resource: fix up printks for resources in misc drivers This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-12 15:20:16 -07:00
"PCI resource 2 size of 0x%llx, aborting.\n",
dev_lim->uar_size,
(unsigned long long)pci_resource_len(mdev->pdev, 2));
IB/mthca: Relax UAR size check There are some cards around that have UAR (user access region) size different from 8 MB. Relax our sanity check to make sure that the PCI BAR is big enough to access the UAR size reported by the device firmware instead. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30 15:20:35 -08:00
return -ENODEV;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mdev->limits.num_ports = dev_lim->num_ports;
mdev->limits.vl_cap = dev_lim->max_vl;
mdev->limits.mtu_cap = dev_lim->max_mtu;
mdev->limits.gid_table_len = dev_lim->max_gids;
mdev->limits.pkey_table_len = dev_lim->max_pkeys;
mdev->limits.local_ca_ack_delay = dev_lim->local_ca_ack_delay;
IB/mthca: Fix max_sge value returned by query_device The mthca driver returns the maximum number of scatter/gather entries returned by the firmware as the max_sge value when device properties are queried. However, the firmware also reports a limit on the maximum descriptor size allowed, and because mthca takes into account the worst case send request overhead when checking whether to allow a QP to be created, the largest number of scatter/gather entries that can be used with mthca may be limited by the maximum descriptor size rather than just by the actual s/g entry limit. This means that applications cannot actually create QPs with max_send_sge equal to the limit returned by ib_query_device(). Fix this by checking if the maximum descriptor size imposes a lower limit and if so returning that lower limit. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-16 14:58:44 -07:00
/*
* Need to allow for worst case send WQE overhead and check
* whether max_desc_sz imposes a lower limit than max_sg; UD
* send has the biggest overhead.
*/
mdev->limits.max_sg = min_t(int, dev_lim->max_sg,
(dev_lim->max_desc_sz -
sizeof (struct mthca_next_seg) -
(mthca_is_memfree(mdev) ?
sizeof (struct mthca_arbel_ud_seg) :
sizeof (struct mthca_tavor_ud_seg))) /
sizeof (struct mthca_data_seg));
[IB] mthca: Better limit checking and reporting Check the sizes of CQs, QPs and SRQs when creating objects, and fail instead of creating too-big queues. Also return real limits instead of just plausible-sounding values from mthca_query_device(). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-10 13:48:07 -07:00
mdev->limits.max_wqes = dev_lim->max_qp_sz;
mdev->limits.max_qp_init_rdma = dev_lim->max_requester_per_qp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mdev->limits.reserved_qps = dev_lim->reserved_qps;
[IB] mthca: Better limit checking and reporting Check the sizes of CQs, QPs and SRQs when creating objects, and fail instead of creating too-big queues. Also return real limits instead of just plausible-sounding values from mthca_query_device(). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-10 13:48:07 -07:00
mdev->limits.max_srq_wqes = dev_lim->max_srq_sz;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mdev->limits.reserved_srqs = dev_lim->reserved_srqs;
mdev->limits.reserved_eecs = dev_lim->reserved_eecs;
[IB] uverbs: have kernel return QP capabilities Move the computation of QP capabilities (max scatter/gather entries, max inline data, etc) into the kernel, and have the uverbs module return the values as part of the create QP response. This keeps precise knowledge of device limits in the low-level kernel driver. This requires an ABI bump, so while we're making changes, get rid of the max_sge parameter for the modify SRQ command -- it's not used and shouldn't be there. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-09 11:26:07 -08:00
mdev->limits.max_desc_sz = dev_lim->max_desc_sz;
IB/mthca: Fix max_srq_sge returned by ib_query_device for Tavor devices The driver allocates SRQ WQEs size with a power of 2 size both for Tavor and for memfree. For Tavor, however, the hardware only requires the WQE size to be a multiple of 16, not a power of 2, and the max number of scatter-gather allowed is reported accordingly by the firmware (and this is the value currently returned by ib_query_device() and ibv_query_device()). If the max number of scatter/gather entries reported by the FW is used when creating an SRQ, the creation will fail for Tavor, since the required WQE size will be increased to the next power of 2, which turns out to be larger than the device permitted max WQE size (which is not a power of 2). This patch reduces the reported SRQ max wqe size so that it can be used successfully in creating an SRQ on Tavor HCAs. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-11 18:16:27 +03:00
mdev->limits.max_srq_sge = mthca_max_srq_sge(mdev);
[IB] mthca: Better limit checking and reporting Check the sizes of CQs, QPs and SRQs when creating objects, and fail instead of creating too-big queues. Also return real limits instead of just plausible-sounding values from mthca_query_device(). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-10 13:48:07 -07:00
/*
* Subtract 1 from the limit because we need to allocate a
* spare CQE so the HCA HW can tell the difference between an
* empty CQ and a full CQ.
*/
mdev->limits.max_cqes = dev_lim->max_cq_sz - 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mdev->limits.reserved_cqs = dev_lim->reserved_cqs;
mdev->limits.reserved_eqs = dev_lim->reserved_eqs;
mdev->limits.reserved_mtts = dev_lim->reserved_mtts;
mdev->limits.reserved_mrws = dev_lim->reserved_mrws;
mdev->limits.reserved_uars = dev_lim->reserved_uars;
mdev->limits.reserved_pds = dev_lim->reserved_pds;
[PATCH] IB/mthca: Use correct port width capability value When we call the INIT_IB firmware command to bring up a port, use the actual port width capability returned by the QUERY_DEV_LIM command instead of always trying to enable both 1X and 4X. This fixes breakage seen when the firmware is build to allow 4X only. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-17 07:39:10 -07:00
mdev->limits.port_width_cap = dev_lim->max_port_width;
[IB] mthca: report page size capability Report the device's real page size capability in mthca_query_device(). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-04 16:03:32 -08:00
mdev->limits.page_size_cap = ~(u32) (dev_lim->min_page_sz - 1);
[IB] mthca: Report correct atomic capability Return correct atomic capability flag from mthca query function. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-26 12:30:02 -07:00
mdev->limits.flags = dev_lim->flags;
IB: simplify static rate encoding Push translation of static rate to HCA format into low-level drivers, where it belongs. For static rate encoding, use encoding of rate field from IB standard PathRecord, with addition of value 0, for backwards compatibility with current usage. The changes are: - Add enum ib_rate to midlayer includes. - Get rid of static rate translation in IPoIB; just use static rate directly from Path and MulticastGroup records. - Update mthca driver to translate absolute static rate into the format used by hardware. This also fixes mthca's static rate handling for HCAs that are capable of 4X DDR. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-04-10 09:43:47 -07:00
/*
* For old FW that doesn't return static rate support, use a
* value of 0x3 (only static rate values of 0 or 1 are handled),
* except on Sinai, where even old FW can handle static rate
* values of 2 and 3.
*/
if (dev_lim->stat_rate_support)
mdev->limits.stat_rate_support = dev_lim->stat_rate_support;
else if (mdev->mthca_flags & MTHCA_FLAG_SINAI_OPT)
mdev->limits.stat_rate_support = 0xf;
else
mdev->limits.stat_rate_support = 0x3;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/* IB_DEVICE_RESIZE_MAX_WR not supported by driver.
May be doable since hardware supports it for SRQ.
IB_DEVICE_N_NOTIFY_CQ is supported by hardware but not by driver.
IB_DEVICE_SRQ_RESIZE is supported by hardware but SRQ is not
supported by driver. */
mdev->device_cap_flags = IB_DEVICE_CHANGE_PHY_PORT |
IB_DEVICE_PORT_ACTIVE_EVENT |
IB_DEVICE_SYS_IMAGE_GUID |
IB_DEVICE_RC_RNR_NAK_GEN;
if (dev_lim->flags & DEV_LIM_FLAG_BAD_PKEY_CNTR)
mdev->device_cap_flags |= IB_DEVICE_BAD_PKEY_CNTR;
if (dev_lim->flags & DEV_LIM_FLAG_BAD_QKEY_CNTR)
mdev->device_cap_flags |= IB_DEVICE_BAD_QKEY_CNTR;
if (dev_lim->flags & DEV_LIM_FLAG_RAW_MULTI)
mdev->device_cap_flags |= IB_DEVICE_RAW_MULTI;
if (dev_lim->flags & DEV_LIM_FLAG_AUTO_PATH_MIG)
mdev->device_cap_flags |= IB_DEVICE_AUTO_PATH_MIG;
if (dev_lim->flags & DEV_LIM_FLAG_UD_AV_PORT_ENFORCE)
mdev->device_cap_flags |= IB_DEVICE_UD_AV_PORT_ENFORCE;
if (dev_lim->flags & DEV_LIM_FLAG_SRQ)
mdev->mthca_flags |= MTHCA_FLAG_SRQ;
IB/mthca: Add IPoIB checksum offload support Arbel and Sinai devices support checksum generation and verification of TCP and UDP packets for UD IPoIB messages. This patch checks if the HCA supports this and sets the IB_DEVICE_UD_IP_CSUM capability flag if it does. It implements support for handling the IB_SEND_IP_CSUM send flag and setting the csum_ok field in receive work completions. Signed-off-by: Eli Cohen <eli@mellnaox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:01:11 -07:00
if (mthca_is_memfree(mdev))
if (dev_lim->flags & DEV_LIM_FLAG_IPOIB_CSUM)
mdev->device_cap_flags |= IB_DEVICE_UD_IP_CSUM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return 0;
}
IB/mthca: Fix section mismatches Commit b3b30f5e ("IB/mthca: Recover from catastrophic errors") introduced some section mismatch breakage, because the error recovery code tears down and reinitializes the device, which calls into lots of code originally marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Reported by Randy Dunlap <randy.dunlap@oracle.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:06 -08:00
static int mthca_init_tavor(struct mthca_dev *mdev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
IB/mthca: Avoid integer overflow when dealing with profile size mthca_make_profile() returns the size in bytes of the HCA context layout it creates, or a negative value if an error occurs. However, the return value is declared as u64 and the memfree initialization path casts this value to int to test if it is negative. This makes it think incorrectly than an error has occurred if the context size happens to be bigger than 2GB, since this turns into a negative int. Fix this by having mthca_make_profile() return an s64 and testing for an error by checking whether this 64-bit value itself is negative. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:01:13 -07:00
s64 size;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
u8 status;
int err;
struct mthca_dev_lim dev_lim;
struct mthca_profile profile;
struct mthca_init_hca_param init_hca;
err = mthca_SYS_EN(mdev, &status);
if (err) {
mthca_err(mdev, "SYS_EN command failed, aborting.\n");
return err;
}
if (status) {
mthca_err(mdev, "SYS_EN returned status 0x%02x, "
"aborting.\n", status);
return -EINVAL;
}
err = mthca_QUERY_FW(mdev, &status);
if (err) {
mthca_err(mdev, "QUERY_FW command failed, aborting.\n");
goto err_disable;
}
if (status) {
mthca_err(mdev, "QUERY_FW returned status 0x%02x, "
"aborting.\n", status);
err = -EINVAL;
goto err_disable;
}
err = mthca_QUERY_DDR(mdev, &status);
if (err) {
mthca_err(mdev, "QUERY_DDR command failed, aborting.\n");
goto err_disable;
}
if (status) {
mthca_err(mdev, "QUERY_DDR returned status 0x%02x, "
"aborting.\n", status);
err = -EINVAL;
goto err_disable;
}
err = mthca_dev_lim(mdev, &dev_lim);
IB/mthca: check return value in mthca_dev_lim call Check error return on call to mthca_dev_lim for Tavor (as is done for memfree). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-05 16:12:01 -08:00
if (err) {
mthca_err(mdev, "QUERY_DEV_LIM command failed, aborting.\n");
goto err_disable;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
IB/mthca: Add HCA profile module parameters Add module parameters that enable settting some of the HCA profile values, such as the number of QPs, CQs, etc. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-10 13:40:17 +02:00
profile = hca_profile;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
profile.num_uar = dev_lim.uar_size / PAGE_SIZE;
profile.uarc_size = 0;
[PATCH] IB/mthca: Add SRQ implementation Add mthca support for shared receive queues (SRQs), including userspace SRQs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-19 10:59:31 -07:00
if (mdev->mthca_flags & MTHCA_FLAG_SRQ)
profile.num_srq = dev_lim.max_srqs;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
IB/mthca: Avoid integer overflow when dealing with profile size mthca_make_profile() returns the size in bytes of the HCA context layout it creates, or a negative value if an error occurs. However, the return value is declared as u64 and the memfree initialization path casts this value to int to test if it is negative. This makes it think incorrectly than an error has occurred if the context size happens to be bigger than 2GB, since this turns into a negative int. Fix this by having mthca_make_profile() return an s64 and testing for an error by checking whether this 64-bit value itself is negative. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:01:13 -07:00
size = mthca_make_profile(mdev, &profile, &dev_lim, &init_hca);
if (size < 0) {
err = size;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
goto err_disable;
IB/mthca: Avoid integer overflow when dealing with profile size mthca_make_profile() returns the size in bytes of the HCA context layout it creates, or a negative value if an error occurs. However, the return value is declared as u64 and the memfree initialization path casts this value to int to test if it is negative. This makes it think incorrectly than an error has occurred if the context size happens to be bigger than 2GB, since this turns into a negative int. Fix this by having mthca_make_profile() return an s64 and testing for an error by checking whether this 64-bit value itself is negative. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:01:13 -07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err = mthca_INIT_HCA(mdev, &init_hca, &status);
if (err) {
mthca_err(mdev, "INIT_HCA command failed, aborting.\n");
goto err_disable;
}
if (status) {
mthca_err(mdev, "INIT_HCA returned status 0x%02x, "
"aborting.\n", status);
err = -EINVAL;
goto err_disable;
}
return 0;
err_disable:
mthca_SYS_DIS(mdev, &status);
return err;
}
IB/mthca: Fix section mismatches Commit b3b30f5e ("IB/mthca: Recover from catastrophic errors") introduced some section mismatch breakage, because the error recovery code tears down and reinitializes the device, which calls into lots of code originally marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Reported by Randy Dunlap <randy.dunlap@oracle.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:06 -08:00
static int mthca_load_fw(struct mthca_dev *mdev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
u8 status;
int err;
/* FIXME: use HCA-attached memory for FW if present */
mdev->fw.arbel.fw_icm =
mthca_alloc_icm(mdev, mdev->fw.arbel.fw_pages,
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:15:08 +02:00
GFP_HIGHUSER | __GFP_NOWARN, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (!mdev->fw.arbel.fw_icm) {
mthca_err(mdev, "Couldn't allocate FW area, aborting.\n");
return -ENOMEM;
}
err = mthca_MAP_FA(mdev, mdev->fw.arbel.fw_icm, &status);
if (err) {
mthca_err(mdev, "MAP_FA command failed, aborting.\n");
goto err_free;
}
if (status) {
mthca_err(mdev, "MAP_FA returned status 0x%02x, aborting.\n", status);
err = -EINVAL;
goto err_free;
}
err = mthca_RUN_FW(mdev, &status);
if (err) {
mthca_err(mdev, "RUN_FW command failed, aborting.\n");
goto err_unmap_fa;
}
if (status) {
mthca_err(mdev, "RUN_FW returned status 0x%02x, aborting.\n", status);
err = -EINVAL;
goto err_unmap_fa;
}
return 0;
err_unmap_fa:
mthca_UNMAP_FA(mdev, &status);
err_free:
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:15:08 +02:00
mthca_free_icm(mdev, mdev->fw.arbel.fw_icm, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return err;
}
IB/mthca: Fix section mismatches Commit b3b30f5e ("IB/mthca: Recover from catastrophic errors") introduced some section mismatch breakage, because the error recovery code tears down and reinitializes the device, which calls into lots of code originally marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Reported by Randy Dunlap <randy.dunlap@oracle.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:06 -08:00
static int mthca_init_icm(struct mthca_dev *mdev,
struct mthca_dev_lim *dev_lim,
struct mthca_init_hca_param *init_hca,
u64 icm_size)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
u64 aux_pages;
u8 status;
int err;
err = mthca_SET_ICM_SIZE(mdev, icm_size, &aux_pages, &status);
if (err) {
mthca_err(mdev, "SET_ICM_SIZE command failed, aborting.\n");
return err;
}
if (status) {
mthca_err(mdev, "SET_ICM_SIZE returned status 0x%02x, "
"aborting.\n", status);
return -EINVAL;
}
mthca_dbg(mdev, "%lld KB of HCA context requires %lld KB aux memory.\n",
(unsigned long long) icm_size >> 10,
(unsigned long long) aux_pages << 2);
mdev->fw.arbel.aux_icm = mthca_alloc_icm(mdev, aux_pages,
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:15:08 +02:00
GFP_HIGHUSER | __GFP_NOWARN, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (!mdev->fw.arbel.aux_icm) {
mthca_err(mdev, "Couldn't allocate aux memory, aborting.\n");
return -ENOMEM;
}
err = mthca_MAP_ICM_AUX(mdev, mdev->fw.arbel.aux_icm, &status);
if (err) {
mthca_err(mdev, "MAP_ICM_AUX command failed, aborting.\n");
goto err_free_aux;
}
if (status) {
mthca_err(mdev, "MAP_ICM_AUX returned status 0x%02x, aborting.\n", status);
err = -EINVAL;
goto err_free_aux;
}
err = mthca_map_eq_icm(mdev, init_hca->eqc_base);
if (err) {
mthca_err(mdev, "Failed to map EQ context memory, aborting.\n");
goto err_unmap_aux;
}
IB/mthca: Give reserved MTTs a separate cache line MTTs are allocated in non-cache-coherent memory, so we must give reserved MTTs their own cache line, to prevent both device and CPU from writing into the same cache line at the same time. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:17:26 +02:00
/* CPU writes to non-reserved MTTs, while HCA might DMA to reserved mtts */
IB/mthca: Add module parameter for number of MTTs per segment The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27 14:36:16 -07:00
mdev->limits.reserved_mtts = ALIGN(mdev->limits.reserved_mtts * mdev->limits.mtt_seg_size,
dma_get_cache_alignment()) / mdev->limits.mtt_seg_size;
IB/mthca: Give reserved MTTs a separate cache line MTTs are allocated in non-cache-coherent memory, so we must give reserved MTTs their own cache line, to prevent both device and CPU from writing into the same cache line at the same time. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:17:26 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mdev->mr_table.mtt_table = mthca_alloc_icm_table(mdev, init_hca->mtt_base,
IB/mthca: Add module parameter for number of MTTs per segment The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27 14:36:16 -07:00
mdev->limits.mtt_seg_size,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mdev->limits.num_mtt_segs,
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:15:08 +02:00
mdev->limits.reserved_mtts,
1, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (!mdev->mr_table.mtt_table) {
mthca_err(mdev, "Failed to map MTT context memory, aborting.\n");
err = -ENOMEM;
goto err_unmap_eq;
}
mdev->mr_table.mpt_table = mthca_alloc_icm_table(mdev, init_hca->mpt_base,
dev_lim->mpt_entry_sz,
mdev->limits.num_mpts,
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:15:08 +02:00
mdev->limits.reserved_mrws,
1, 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (!mdev->mr_table.mpt_table) {
mthca_err(mdev, "Failed to map MPT context memory, aborting.\n");
err = -ENOMEM;
goto err_unmap_mtt;
}
mdev->qp_table.qp_table = mthca_alloc_icm_table(mdev, init_hca->qpc_base,
dev_lim->qpc_entry_sz,
mdev->limits.num_qps,
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:15:08 +02:00
mdev->limits.reserved_qps,
0, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (!mdev->qp_table.qp_table) {
mthca_err(mdev, "Failed to map QP context memory, aborting.\n");
err = -ENOMEM;
goto err_unmap_mpt;
}
mdev->qp_table.eqp_table = mthca_alloc_icm_table(mdev, init_hca->eqpc_base,
dev_lim->eqpc_entry_sz,
mdev->limits.num_qps,
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:15:08 +02:00
mdev->limits.reserved_qps,
0, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (!mdev->qp_table.eqp_table) {
mthca_err(mdev, "Failed to map EQP context memory, aborting.\n");
err = -ENOMEM;
goto err_unmap_qp;
}
[PATCH] IB/mthca: map context for RDMA responder in mem-free mode Fix RDMA in mem-free mode: we need to make sure that the RDMA context memory is mapped for the HCA. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:34 -07:00
mdev->qp_table.rdb_table = mthca_alloc_icm_table(mdev, init_hca->rdb_base,
MTHCA_RDB_ENTRY_SIZE,
mdev->limits.num_qps <<
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:15:08 +02:00
mdev->qp_table.rdb_shift, 0,
[PATCH] IB/mthca: map context for RDMA responder in mem-free mode Fix RDMA in mem-free mode: we need to make sure that the RDMA context memory is mapped for the HCA. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:34 -07:00
0, 0);
if (!mdev->qp_table.rdb_table) {
mthca_err(mdev, "Failed to map RDB context memory, aborting\n");
err = -ENOMEM;
[PATCH] drivers/infiniband/hw/mthca/mthca_main.c: remove an unused label Correct unwinding in error path of mthca_init_icm(). Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:35 -07:00
goto err_unmap_eqp;
[PATCH] IB/mthca: map context for RDMA responder in mem-free mode Fix RDMA in mem-free mode: we need to make sure that the RDMA context memory is mapped for the HCA. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:34 -07:00
}
mdev->cq_table.table = mthca_alloc_icm_table(mdev, init_hca->cqc_base,
[PATCH] IB/mthca: Add SRQ implementation Add mthca support for shared receive queues (SRQs), including userspace SRQs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-19 10:59:31 -07:00
dev_lim->cqc_entry_sz,
mdev->limits.num_cqs,
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:15:08 +02:00
mdev->limits.reserved_cqs,
0, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (!mdev->cq_table.table) {
mthca_err(mdev, "Failed to map CQ context memory, aborting.\n");
err = -ENOMEM;
[PATCH] IB/mthca: map context for RDMA responder in mem-free mode Fix RDMA in mem-free mode: we need to make sure that the RDMA context memory is mapped for the HCA. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:34 -07:00
goto err_unmap_rdb;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
[PATCH] IB/mthca: Add SRQ implementation Add mthca support for shared receive queues (SRQs), including userspace SRQs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-19 10:59:31 -07:00
if (mdev->mthca_flags & MTHCA_FLAG_SRQ) {
mdev->srq_table.table =
mthca_alloc_icm_table(mdev, init_hca->srqc_base,
dev_lim->srq_entry_sz,
mdev->limits.num_srqs,
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:15:08 +02:00
mdev->limits.reserved_srqs,
0, 0);
[PATCH] IB/mthca: Add SRQ implementation Add mthca support for shared receive queues (SRQs), including userspace SRQs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-19 10:59:31 -07:00
if (!mdev->srq_table.table) {
mthca_err(mdev, "Failed to map SRQ context memory, "
"aborting.\n");
err = -ENOMEM;
goto err_unmap_cq;
}
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
/*
* It's not strictly required, but for simplicity just map the
* whole multicast group table now. The table isn't very big
* and it's a lot easier than trying to track ref counts.
*/
mdev->mcg_table.table = mthca_alloc_icm_table(mdev, init_hca->mc_base,
MTHCA_MGM_ENTRY_SIZE,
mdev->limits.num_mgms +
mdev->limits.num_amgms,
mdev->limits.num_mgms +
mdev->limits.num_amgms,
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:15:08 +02:00
0, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (!mdev->mcg_table.table) {
mthca_err(mdev, "Failed to map MCG context memory, aborting.\n");
err = -ENOMEM;
[PATCH] IB/mthca: Add SRQ implementation Add mthca support for shared receive queues (SRQs), including userspace SRQs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-19 10:59:31 -07:00
goto err_unmap_srq;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
return 0;
[PATCH] IB/mthca: Add SRQ implementation Add mthca support for shared receive queues (SRQs), including userspace SRQs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-19 10:59:31 -07:00
err_unmap_srq:
if (mdev->mthca_flags & MTHCA_FLAG_SRQ)
mthca_free_icm_table(mdev, mdev->srq_table.table);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err_unmap_cq:
mthca_free_icm_table(mdev, mdev->cq_table.table);
[PATCH] IB/mthca: map context for RDMA responder in mem-free mode Fix RDMA in mem-free mode: we need to make sure that the RDMA context memory is mapped for the HCA. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:34 -07:00
err_unmap_rdb:
mthca_free_icm_table(mdev, mdev->qp_table.rdb_table);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err_unmap_eqp:
mthca_free_icm_table(mdev, mdev->qp_table.eqp_table);
err_unmap_qp:
mthca_free_icm_table(mdev, mdev->qp_table.qp_table);
err_unmap_mpt:
mthca_free_icm_table(mdev, mdev->mr_table.mpt_table);
err_unmap_mtt:
mthca_free_icm_table(mdev, mdev->mr_table.mtt_table);
err_unmap_eq:
mthca_unmap_eq_icm(mdev);
err_unmap_aux:
mthca_UNMAP_ICM_AUX(mdev, &status);
err_free_aux:
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:15:08 +02:00
mthca_free_icm(mdev, mdev->fw.arbel.aux_icm, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return err;
}
[IB] mthca: Fix memory leak on device close Remember to free the multicast group context memory table. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-30 13:55:50 -07:00
static void mthca_free_icms(struct mthca_dev *mdev)
{
u8 status;
mthca_free_icm_table(mdev, mdev->mcg_table.table);
if (mdev->mthca_flags & MTHCA_FLAG_SRQ)
mthca_free_icm_table(mdev, mdev->srq_table.table);
mthca_free_icm_table(mdev, mdev->cq_table.table);
mthca_free_icm_table(mdev, mdev->qp_table.rdb_table);
mthca_free_icm_table(mdev, mdev->qp_table.eqp_table);
mthca_free_icm_table(mdev, mdev->qp_table.qp_table);
mthca_free_icm_table(mdev, mdev->mr_table.mpt_table);
mthca_free_icm_table(mdev, mdev->mr_table.mtt_table);
mthca_unmap_eq_icm(mdev);
mthca_UNMAP_ICM_AUX(mdev, &status);
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:15:08 +02:00
mthca_free_icm(mdev, mdev->fw.arbel.aux_icm, 0);
[IB] mthca: Fix memory leak on device close Remember to free the multicast group context memory table. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-30 13:55:50 -07:00
}
IB/mthca: Fix section mismatches Commit b3b30f5e ("IB/mthca: Recover from catastrophic errors") introduced some section mismatch breakage, because the error recovery code tears down and reinitializes the device, which calls into lots of code originally marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Reported by Randy Dunlap <randy.dunlap@oracle.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:06 -08:00
static int mthca_init_arbel(struct mthca_dev *mdev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
struct mthca_dev_lim dev_lim;
struct mthca_profile profile;
struct mthca_init_hca_param init_hca;
IB/mthca: Avoid integer overflow when dealing with profile size mthca_make_profile() returns the size in bytes of the HCA context layout it creates, or a negative value if an error occurs. However, the return value is declared as u64 and the memfree initialization path casts this value to int to test if it is negative. This makes it think incorrectly than an error has occurred if the context size happens to be bigger than 2GB, since this turns into a negative int. Fix this by having mthca_make_profile() return an s64 and testing for an error by checking whether this 64-bit value itself is negative. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:01:13 -07:00
s64 icm_size;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
u8 status;
int err;
err = mthca_QUERY_FW(mdev, &status);
if (err) {
mthca_err(mdev, "QUERY_FW command failed, aborting.\n");
return err;
}
if (status) {
mthca_err(mdev, "QUERY_FW returned status 0x%02x, "
"aborting.\n", status);
return -EINVAL;
}
err = mthca_ENABLE_LAM(mdev, &status);
if (err) {
mthca_err(mdev, "ENABLE_LAM command failed, aborting.\n");
return err;
}
if (status == MTHCA_CMD_STAT_LAM_NOT_PRE) {
mthca_dbg(mdev, "No HCA-attached memory (running in MemFree mode)\n");
mdev->mthca_flags |= MTHCA_FLAG_NO_LAM;
} else if (status) {
mthca_err(mdev, "ENABLE_LAM returned status 0x%02x, "
"aborting.\n", status);
return -EINVAL;
}
err = mthca_load_fw(mdev);
if (err) {
mthca_err(mdev, "Failed to start FW, aborting.\n");
goto err_disable;
}
err = mthca_dev_lim(mdev, &dev_lim);
if (err) {
mthca_err(mdev, "QUERY_DEV_LIM command failed, aborting.\n");
goto err_stop_fw;
}
IB/mthca: Add HCA profile module parameters Add module parameters that enable settting some of the HCA profile values, such as the number of QPs, CQs, etc. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-10 13:40:17 +02:00
profile = hca_profile;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
profile.num_uar = dev_lim.uar_size / PAGE_SIZE;
profile.num_udav = 0;
[PATCH] IB/mthca: Add SRQ implementation Add mthca support for shared receive queues (SRQs), including userspace SRQs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-19 10:59:31 -07:00
if (mdev->mthca_flags & MTHCA_FLAG_SRQ)
profile.num_srq = dev_lim.max_srqs;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
icm_size = mthca_make_profile(mdev, &profile, &dev_lim, &init_hca);
IB/mthca: Avoid integer overflow when dealing with profile size mthca_make_profile() returns the size in bytes of the HCA context layout it creates, or a negative value if an error occurs. However, the return value is declared as u64 and the memfree initialization path casts this value to int to test if it is negative. This makes it think incorrectly than an error has occurred if the context size happens to be bigger than 2GB, since this turns into a negative int. Fix this by having mthca_make_profile() return an s64 and testing for an error by checking whether this 64-bit value itself is negative. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16 21:01:13 -07:00
if (icm_size < 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err = icm_size;
goto err_stop_fw;
}
err = mthca_init_icm(mdev, &dev_lim, &init_hca, icm_size);
if (err)
goto err_stop_fw;
err = mthca_INIT_HCA(mdev, &init_hca, &status);
if (err) {
mthca_err(mdev, "INIT_HCA command failed, aborting.\n");
goto err_free_icm;
}
if (status) {
mthca_err(mdev, "INIT_HCA returned status 0x%02x, "
"aborting.\n", status);
err = -EINVAL;
goto err_free_icm;
}
return 0;
err_free_icm:
[IB] mthca: Fix memory leak on device close Remember to free the multicast group context memory table. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-30 13:55:50 -07:00
mthca_free_icms(mdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err_stop_fw:
mthca_UNMAP_FA(mdev, &status);
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:15:08 +02:00
mthca_free_icm(mdev, mdev->fw.arbel.fw_icm, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err_disable:
if (!(mdev->mthca_flags & MTHCA_FLAG_NO_LAM))
mthca_DISABLE_LAM(mdev, &status);
return err;
}
[PATCH] IB/mthca: add HCA board ID to sysfs info Add support for reporting HCA board ID returned from QUERY_ADAPTER firmware command through sysfs. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-13 21:19:38 -07:00
static void mthca_close_hca(struct mthca_dev *mdev)
{
u8 status;
mthca_CLOSE_HCA(mdev, 0, &status);
if (mthca_is_memfree(mdev)) {
[IB] mthca: Fix memory leak on device close Remember to free the multicast group context memory table. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-09-30 13:55:50 -07:00
mthca_free_icms(mdev);
[PATCH] IB/mthca: add HCA board ID to sysfs info Add support for reporting HCA board ID returned from QUERY_ADAPTER firmware command through sysfs. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-13 21:19:38 -07:00
mthca_UNMAP_FA(mdev, &status);
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10 23:15:08 +02:00
mthca_free_icm(mdev, mdev->fw.arbel.fw_icm, 0);
[PATCH] IB/mthca: add HCA board ID to sysfs info Add support for reporting HCA board ID returned from QUERY_ADAPTER firmware command through sysfs. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-13 21:19:38 -07:00
if (!(mdev->mthca_flags & MTHCA_FLAG_NO_LAM))
mthca_DISABLE_LAM(mdev, &status);
} else
mthca_SYS_DIS(mdev, &status);
}
IB/mthca: Fix section mismatches Commit b3b30f5e ("IB/mthca: Recover from catastrophic errors") introduced some section mismatch breakage, because the error recovery code tears down and reinitializes the device, which calls into lots of code originally marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Reported by Randy Dunlap <randy.dunlap@oracle.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:06 -08:00
static int mthca_init_hca(struct mthca_dev *mdev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
[PATCH] IB/mthca: add HCA board ID to sysfs info Add support for reporting HCA board ID returned from QUERY_ADAPTER firmware command through sysfs. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-13 21:19:38 -07:00
u8 status;
int err;
struct mthca_adapter adapter;
[PATCH] IB/mthca: encapsulate mem-free check into mthca_is_memfree() Clean up mem-free mode support by introducing mthca_is_memfree() function, which encapsulates the logic of deciding if a device is mem-free. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:32 -07:00
if (mthca_is_memfree(mdev))
[PATCH] IB/mthca: add HCA board ID to sysfs info Add support for reporting HCA board ID returned from QUERY_ADAPTER firmware command through sysfs. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-13 21:19:38 -07:00
err = mthca_init_arbel(mdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
else
[PATCH] IB/mthca: add HCA board ID to sysfs info Add support for reporting HCA board ID returned from QUERY_ADAPTER firmware command through sysfs. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-13 21:19:38 -07:00
err = mthca_init_tavor(mdev);
if (err)
return err;
err = mthca_QUERY_ADAPTER(mdev, &adapter, &status);
if (err) {
mthca_err(mdev, "QUERY_ADAPTER command failed, aborting.\n");
goto err_close;
}
if (status) {
mthca_err(mdev, "QUERY_ADAPTER returned status 0x%02x, "
"aborting.\n", status);
err = -EINVAL;
goto err_close;
}
mdev->eq_table.inta_pin = adapter.inta_pin;
IB/mthca: Don't read reserved fields in mthca_QUERY_ADAPTER() For memfree devices, the firmware QUERY_ADAPTER command does not return vendor_id, device_id, and revision_id; do not return these fields in the QUERY_ADAPTER function for memfree devices. Instead, for memfree devices, initialize the rev_id field of the mthca device via init_node_data (MAD IFC query), as is done in the query_device verb implementation. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-27 18:13:20 +02:00
if (!mthca_is_memfree(mdev))
mdev->rev_id = adapter.revision_id;
[PATCH] IB/mthca: add HCA board ID to sysfs info Add support for reporting HCA board ID returned from QUERY_ADAPTER firmware command through sysfs. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-13 21:19:38 -07:00
memcpy(mdev->board_id, adapter.board_id, sizeof mdev->board_id);
return 0;
err_close:
mthca_close_hca(mdev);
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
IB/mthca: Fix section mismatches Commit b3b30f5e ("IB/mthca: Recover from catastrophic errors") introduced some section mismatch breakage, because the error recovery code tears down and reinitializes the device, which calls into lots of code originally marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Reported by Randy Dunlap <randy.dunlap@oracle.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:06 -08:00
static int mthca_setup_hca(struct mthca_dev *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
int err;
u8 status;
MTHCA_INIT_DOORBELL_LOCK(&dev->doorbell_lock);
err = mthca_init_uar_table(dev);
if (err) {
mthca_err(dev, "Failed to initialize "
"user access region table, aborting.\n");
return err;
}
err = mthca_uar_alloc(dev, &dev->driver_uar);
if (err) {
mthca_err(dev, "Failed to allocate driver access region, "
"aborting.\n");
goto err_uar_table_free;
}
dev->kar = ioremap(dev->driver_uar.pfn << PAGE_SHIFT, PAGE_SIZE);
if (!dev->kar) {
mthca_err(dev, "Couldn't map kernel access region, "
"aborting.\n");
err = -ENOMEM;
goto err_uar_free;
}
err = mthca_init_pd_table(dev);
if (err) {
mthca_err(dev, "Failed to initialize "
"protection domain table, aborting.\n");
goto err_kar_unmap;
}
err = mthca_init_mr_table(dev);
if (err) {
mthca_err(dev, "Failed to initialize "
"memory region table, aborting.\n");
goto err_pd_table_free;
}
[PATCH] IB uverbs: add mthca user PD support Add support for userspace protection domains (PDs) to mthca. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 17:57:18 -07:00
err = mthca_pd_alloc(dev, 1, &dev->driver_pd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (err) {
mthca_err(dev, "Failed to create driver PD, "
"aborting.\n");
goto err_mr_table_free;
}
err = mthca_init_eq_table(dev);
if (err) {
mthca_err(dev, "Failed to initialize "
"event queue table, aborting.\n");
goto err_pd_free;
}
err = mthca_cmd_use_events(dev);
if (err) {
mthca_err(dev, "Failed to switch to event-driven "
"firmware commands, aborting.\n");
goto err_eq_table_free;
}
err = mthca_NOP(dev, &status);
if (err || status) {
IB/mthca: Remove MSI support as scheduled Remove MSI support from the mthca driver, as scheduled. There is no reason to use MSI instead of MSI-X, since MSI-X performs better. No one has spoken up since MSI support was deprecated in commit f6be6fbe ("IB/mthca: Schedule MSI support for removal"), so apparently the MSI support is unused. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-01 15:47:10 +02:00
if (dev->mthca_flags & MTHCA_FLAG_MSI_X) {
IB/mthca: Enable MSI-X by default Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07 16:10:34 +03:00
mthca_warn(dev, "NOP command failed to generate interrupt "
"(IRQ %d).\n",
IB/mthca: Remove MSI support as scheduled Remove MSI support from the mthca driver, as scheduled. There is no reason to use MSI instead of MSI-X, since MSI-X performs better. No one has spoken up since MSI support was deprecated in commit f6be6fbe ("IB/mthca: Schedule MSI support for removal"), so apparently the MSI support is unused. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-01 15:47:10 +02:00
dev->eq_table.eq[MTHCA_EQ_CMD].msi_x_vector);
mthca_warn(dev, "Trying again with MSI-X disabled.\n");
IB/mthca: Enable MSI-X by default Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07 16:10:34 +03:00
} else {
mthca_err(dev, "NOP command failed to generate interrupt "
"(IRQ %d), aborting.\n",
dev->pdev->irq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mthca_err(dev, "BIOS or ACPI interrupt routing problem?\n");
IB/mthca: Enable MSI-X by default Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07 16:10:34 +03:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
goto err_cmd_poll;
}
mthca_dbg(dev, "NOP command IRQ test passed\n");
err = mthca_init_cq_table(dev);
if (err) {
mthca_err(dev, "Failed to initialize "
"completion queue table, aborting.\n");
goto err_cmd_poll;
}
[PATCH] IB/mthca: Add SRQ implementation Add mthca support for shared receive queues (SRQs), including userspace SRQs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-19 10:59:31 -07:00
err = mthca_init_srq_table(dev);
if (err) {
mthca_err(dev, "Failed to initialize "
"shared receive queue table, aborting.\n");
goto err_cq_table_free;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err = mthca_init_qp_table(dev);
if (err) {
mthca_err(dev, "Failed to initialize "
"queue pair table, aborting.\n");
[PATCH] IB/mthca: Add SRQ implementation Add mthca support for shared receive queues (SRQs), including userspace SRQs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-19 10:59:31 -07:00
goto err_srq_table_free;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
err = mthca_init_av_table(dev);
if (err) {
mthca_err(dev, "Failed to initialize "
"address vector table, aborting.\n");
goto err_qp_table_free;
}
err = mthca_init_mcg_table(dev);
if (err) {
mthca_err(dev, "Failed to initialize "
"multicast group table, aborting.\n");
goto err_av_table_free;
}
return 0;
err_av_table_free:
mthca_cleanup_av_table(dev);
err_qp_table_free:
mthca_cleanup_qp_table(dev);
[PATCH] IB/mthca: Add SRQ implementation Add mthca support for shared receive queues (SRQs), including userspace SRQs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-19 10:59:31 -07:00
err_srq_table_free:
mthca_cleanup_srq_table(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err_cq_table_free:
mthca_cleanup_cq_table(dev);
err_cmd_poll:
mthca_cmd_use_polling(dev);
err_eq_table_free:
mthca_cleanup_eq_table(dev);
err_pd_free:
mthca_pd_free(dev, &dev->driver_pd);
err_mr_table_free:
mthca_cleanup_mr_table(dev);
err_pd_table_free:
mthca_cleanup_pd_table(dev);
err_kar_unmap:
iounmap(dev->kar);
err_uar_free:
mthca_uar_free(dev, &dev->driver_uar);
err_uar_table_free:
mthca_cleanup_uar_table(dev);
return err;
}
IB/mthca: Fix section mismatches Commit b3b30f5e ("IB/mthca: Recover from catastrophic errors") introduced some section mismatch breakage, because the error recovery code tears down and reinitializes the device, which calls into lots of code originally marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Reported by Randy Dunlap <randy.dunlap@oracle.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:06 -08:00
static int mthca_enable_msi_x(struct mthca_dev *mdev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
struct msix_entry entries[3];
int err;
entries[0].entry = 0;
entries[1].entry = 1;
entries[2].entry = 2;
err = pci_enable_msix(mdev->pdev, entries, ARRAY_SIZE(entries));
if (err) {
if (err > 0)
mthca_info(mdev, "Only %d MSI-X vectors available, "
"not using MSI-X\n", err);
return err;
}
mdev->eq_table.eq[MTHCA_EQ_COMP ].msi_x_vector = entries[0].vector;
mdev->eq_table.eq[MTHCA_EQ_ASYNC].msi_x_vector = entries[1].vector;
mdev->eq_table.eq[MTHCA_EQ_CMD ].msi_x_vector = entries[2].vector;
return 0;
}
[PATCH] IB/mthca: add support for new MT25204 HCA Decouple table of HCA features from exact HCA device type. Add a current FW version field so we can warn when someone is using old FW. Add support for new MT25204 HCA. Remove the warning about mem-free support, since it should be pretty solid at this point. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:34 -07:00
/* Types of supported HCA */
enum {
TAVOR, /* MT23108 */
ARBEL_COMPAT, /* MT25208 in Tavor compat mode */
ARBEL_NATIVE, /* MT25208 with extended features */
SINAI /* MT25204 */
};
#define MTHCA_FW_VER(major, minor, subminor) \
(((u64) (major) << 32) | ((u64) (minor) << 16) | (u64) (subminor))
static struct {
u64 latest_fw;
IB/mthca: Optimize large messages on Sinai HCAs Sinai (one-port PCI Express) HCAs get improved throughput for messages bigger than 80 KB in DDR mode if memory keys are formatted in a specific way. The enhancement only works if the memory key table is smaller than 2^24 entries. For larger tables, the enhancement is off and a warning is printed (to avoid silent performance loss). Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Michael Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-02 12:40:46 -08:00
u32 flags;
[PATCH] IB/mthca: add support for new MT25204 HCA Decouple table of HCA features from exact HCA device type. Add a current FW version field so we can warn when someone is using old FW. Add support for new MT25204 HCA. Remove the warning about mem-free support, since it should be pretty solid at this point. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:34 -07:00
} mthca_hca_table[] = {
IB/mthca: Update HCA firmware revisions Update the driver's list of current firmware versions with Mellanox's latest releases. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18 20:21:02 -07:00
[TAVOR] = { .latest_fw = MTHCA_FW_VER(3, 5, 0),
IB/mthca: Optimize large messages on Sinai HCAs Sinai (one-port PCI Express) HCAs get improved throughput for messages bigger than 80 KB in DDR mode if memory keys are formatted in a specific way. The enhancement only works if the memory key table is smaller than 2^24 entries. For larger tables, the enhancement is off and a warning is printed (to avoid silent performance loss). Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Michael Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-02 12:40:46 -08:00
.flags = 0 },
IB/mthca: Update HCA firmware revisions Update the driver's list of current firmware versions with Mellanox's latest releases. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18 20:21:02 -07:00
[ARBEL_COMPAT] = { .latest_fw = MTHCA_FW_VER(4, 8, 200),
IB/mthca: Optimize large messages on Sinai HCAs Sinai (one-port PCI Express) HCAs get improved throughput for messages bigger than 80 KB in DDR mode if memory keys are formatted in a specific way. The enhancement only works if the memory key table is smaller than 2^24 entries. For larger tables, the enhancement is off and a warning is printed (to avoid silent performance loss). Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Michael Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-02 12:40:46 -08:00
.flags = MTHCA_FLAG_PCIE },
IB/mthca: Update latest "native Arbel" firmware revision Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:17:44 -08:00
[ARBEL_NATIVE] = { .latest_fw = MTHCA_FW_VER(5, 3, 0),
IB/mthca: Optimize large messages on Sinai HCAs Sinai (one-port PCI Express) HCAs get improved throughput for messages bigger than 80 KB in DDR mode if memory keys are formatted in a specific way. The enhancement only works if the memory key table is smaller than 2^24 entries. For larger tables, the enhancement is off and a warning is printed (to avoid silent performance loss). Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Michael Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-02 12:40:46 -08:00
.flags = MTHCA_FLAG_MEMFREE |
MTHCA_FLAG_PCIE },
IB/mthca: Update HCA firmware revisions Update the driver's list of current firmware versions with Mellanox's latest releases. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-18 20:21:02 -07:00
[SINAI] = { .latest_fw = MTHCA_FW_VER(1, 2, 0),
IB/mthca: Optimize large messages on Sinai HCAs Sinai (one-port PCI Express) HCAs get improved throughput for messages bigger than 80 KB in DDR mode if memory keys are formatted in a specific way. The enhancement only works if the memory key table is smaller than 2^24 entries. For larger tables, the enhancement is off and a warning is printed (to avoid silent performance loss). Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Michael Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-02 12:40:46 -08:00
.flags = MTHCA_FLAG_MEMFREE |
MTHCA_FLAG_PCIE |
MTHCA_FLAG_SINAI_OPT }
[PATCH] IB/mthca: add support for new MT25204 HCA Decouple table of HCA features from exact HCA device type. Add a current FW version field so we can warn when someone is using old FW. Add support for new MT25204 HCA. Remove the warning about mem-free support, since it should be pretty solid at this point. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:34 -07:00
};
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
static int __mthca_init_one(struct pci_dev *pdev, int hca_type)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
int ddr_hidden = 0;
int err;
struct mthca_dev *mdev;
[PATCH] PCI: remove CONFIG_PCI_NAMES This patch removes CONFIG_PCI_NAMES. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-17 04:22:20 +02:00
printk(KERN_INFO PFX "Initializing %s\n",
pci_name(pdev));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "Cannot enable PCI device, "
"aborting.\n");
return err;
}
/*
* Check for BARs. We expect 0: 1MB, 2: 8MB, 4: DDR (may not
* be present)
*/
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM) ||
pci_resource_len(pdev, 0) != 1 << 20) {
[PATCH] IB/mthca: Clean up error messages - Fix incorrect cut-n-paste in error messages. - Add missing newlines in error messages. - Use DRV_NAME instead of "ib_mthca" in a couple of places. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:36:39 -07:00
dev_err(&pdev->dev, "Missing DCS, aborting.\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err = -ENODEV;
goto err_disable_pdev;
}
IB/mthca: Relax UAR size check There are some cards around that have UAR (user access region) size different from 8 MB. Relax our sanity check to make sure that the PCI BAR is big enough to access the UAR size reported by the device firmware instead. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30 15:20:35 -08:00
if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
[PATCH] IB/mthca: Clean up error messages - Fix incorrect cut-n-paste in error messages. - Add missing newlines in error messages. - Use DRV_NAME instead of "ib_mthca" in a couple of places. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:36:39 -07:00
dev_err(&pdev->dev, "Missing UAR, aborting.\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err = -ENODEV;
goto err_disable_pdev;
}
if (!(pci_resource_flags(pdev, 4) & IORESOURCE_MEM))
ddr_hidden = 1;
IB/mthca: Use pci_request_regions() Back in prehistoric (pre-git!) days, the kernel's MSI-X support did request_mem_region() on a device's MSI-X tables, which meant that a driver that enabled MSI-X couldn't use pci_request_regions() (since that would clash with the PCI layer's MSI-X request). However, that was removed (by me!) years ago, so mthca can just use pci_request_regions() and pci_release_regions() instead of its own much more complicated code that avoids requesting the MSI-X tables. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-29 21:37:33 -07:00
err = pci_request_regions(pdev, DRV_NAME);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (err) {
dev_err(&pdev->dev, "Cannot obtain PCI resources, "
"aborting.\n");
goto err_disable_pdev;
}
pci_set_master(pdev);
dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 19:01:13 -07:00
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (err) {
dev_warn(&pdev->dev, "Warning: couldn't set 64-bit PCI DMA mask.\n");
dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 19:01:15 -07:00
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (err) {
dev_err(&pdev->dev, "Can't set PCI DMA mask, aborting.\n");
goto err_free_res;
}
}
dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 19:01:13 -07:00
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (err) {
dev_warn(&pdev->dev, "Warning: couldn't set 64-bit "
"consistent PCI DMA mask.\n");
dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06 19:01:15 -07:00
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (err) {
dev_err(&pdev->dev, "Can't set consistent PCI DMA mask, "
"aborting.\n");
goto err_free_res;
}
}
mdev = (struct mthca_dev *) ib_alloc_device(sizeof *mdev);
if (!mdev) {
dev_err(&pdev->dev, "Device struct alloc failed, "
"aborting.\n");
err = -ENOMEM;
goto err_free_res;
}
[PATCH] IB/mthca: add support for new MT25204 HCA Decouple table of HCA features from exact HCA device type. Add a current FW version field so we can warn when someone is using old FW. Add support for new MT25204 HCA. Remove the warning about mem-free support, since it should be pretty solid at this point. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:34 -07:00
mdev->pdev = pdev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
mdev->mthca_flags = mthca_hca_table[hca_type].flags;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (ddr_hidden)
mdev->mthca_flags |= MTHCA_FLAG_DDR_HIDDEN;
/*
* Now reset the HCA before we touch the PCI capabilities or
* attempt a firmware command, since a boot ROM may have left
* the HCA in an undefined state.
*/
err = mthca_reset(mdev);
if (err) {
mthca_err(mdev, "Failed to reset HCA, aborting.\n");
goto err_free_dev;
}
[PATCH] IB/mthca: Encapsulate command interface init Encapsulate mthca command interface initialization/cleanup. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:36:45 -07:00
if (mthca_cmd_init(mdev)) {
mthca_err(mdev, "Failed to init command interface, aborting.\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
goto err_free_dev;
}
err = mthca_tune_pci(mdev);
if (err)
[PATCH] IB/mthca: Encapsulate command interface init Encapsulate mthca command interface initialization/cleanup. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:36:45 -07:00
goto err_cmd;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err = mthca_init_hca(mdev);
if (err)
[PATCH] IB/mthca: Encapsulate command interface init Encapsulate mthca command interface initialization/cleanup. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:36:45 -07:00
goto err_cmd;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
if (mdev->fw_ver < mthca_hca_table[hca_type].latest_fw) {
IB/mthca: Fix printk format used for firmware version in warning When warning about out-of-date firmware, current mthca code messes up the formatting of the version if the subminor doesn't have three digits. It doesn't fill the field with 0s so we end up with: ib_mthca 0000:0b:00.0: HCA FW version 1.1. 0 is old (1.2. 0 is current). Change the format from "%3d" to "%03d" to get the right thing printed. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-17 18:37:42 -07:00
mthca_warn(mdev, "HCA FW version %d.%d.%03d is old (%d.%d.%03d is current).\n",
[PATCH] IB/mthca: add support for new MT25204 HCA Decouple table of HCA features from exact HCA device type. Add a current FW version field so we can warn when someone is using old FW. Add support for new MT25204 HCA. Remove the warning about mem-free support, since it should be pretty solid at this point. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:34 -07:00
(int) (mdev->fw_ver >> 32), (int) (mdev->fw_ver >> 16) & 0xffff,
(int) (mdev->fw_ver & 0xffff),
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
(int) (mthca_hca_table[hca_type].latest_fw >> 32),
(int) (mthca_hca_table[hca_type].latest_fw >> 16) & 0xffff,
(int) (mthca_hca_table[hca_type].latest_fw & 0xffff));
[PATCH] IB/mthca: add support for new MT25204 HCA Decouple table of HCA features from exact HCA device type. Add a current FW version field so we can warn when someone is using old FW. Add support for new MT25204 HCA. Remove the warning about mem-free support, since it should be pretty solid at this point. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:34 -07:00
mthca_warn(mdev, "If you have problems, try updating your HCA FW.\n");
}
IB/mthca: Enable MSI-X by default Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07 16:10:34 +03:00
if (msi_x && !mthca_enable_msi_x(mdev))
mdev->mthca_flags |= MTHCA_FLAG_MSI_X;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err = mthca_setup_hca(mdev);
IB/mthca: Remove MSI support as scheduled Remove MSI support from the mthca driver, as scheduled. There is no reason to use MSI instead of MSI-X, since MSI-X performs better. No one has spoken up since MSI support was deprecated in commit f6be6fbe ("IB/mthca: Schedule MSI support for removal"), so apparently the MSI support is unused. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-01 15:47:10 +02:00
if (err == -EBUSY && (mdev->mthca_flags & MTHCA_FLAG_MSI_X)) {
IB/mthca: Enable MSI-X by default Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07 16:10:34 +03:00
if (mdev->mthca_flags & MTHCA_FLAG_MSI_X)
pci_disable_msix(pdev);
IB/mthca: Remove MSI support as scheduled Remove MSI support from the mthca driver, as scheduled. There is no reason to use MSI instead of MSI-X, since MSI-X performs better. No one has spoken up since MSI support was deprecated in commit f6be6fbe ("IB/mthca: Schedule MSI support for removal"), so apparently the MSI support is unused. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-01 15:47:10 +02:00
mdev->mthca_flags &= ~MTHCA_FLAG_MSI_X;
IB/mthca: Enable MSI-X by default Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07 16:10:34 +03:00
err = mthca_setup_hca(mdev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (err)
goto err_close;
err = mthca_register_device(mdev);
if (err)
goto err_cleanup;
err = mthca_create_agents(mdev);
if (err)
goto err_unregister;
pci_set_drvdata(pdev, mdev);
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
mdev->hca_type = hca_type;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
IB/mthca: Don't allow userspace open while recovering from catastrophic error Userspace apps are supposed to release all ib device resources if they receive a fatal async event (IBV_EVENT_DEVICE_FATAL). However, the app has no way of knowing when the device has come back up, except to repeatedly attempt ibv_open_device() until it succeeds. However, currently there is no protection against the open succeeding while the device is in being removed following the fatal event. In this case, the open will succeed, but as a result the device waits in the middle of its removal until the new app releases its resources -- and the new app will not do so, since the open succeeded at a point following the fatal event generation. This patch adds an "active" flag to the device. The active flag is set to false (in the fatal event flow) before the "fatal" event is generated, so any subsequent ibv_dev_open() call to the device will fail until the device comes back up, thus preventing the above deadlock. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:36:16 -07:00
mdev->active = true;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
return 0;
err_unregister:
mthca_unregister_device(mdev);
err_cleanup:
mthca_cleanup_mcg_table(mdev);
mthca_cleanup_av_table(mdev);
mthca_cleanup_qp_table(mdev);
[PATCH] IB/mthca: Add SRQ implementation Add mthca support for shared receive queues (SRQs), including userspace SRQs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-19 10:59:31 -07:00
mthca_cleanup_srq_table(mdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mthca_cleanup_cq_table(mdev);
mthca_cmd_use_polling(mdev);
mthca_cleanup_eq_table(mdev);
mthca_pd_free(mdev, &mdev->driver_pd);
mthca_cleanup_mr_table(mdev);
mthca_cleanup_pd_table(mdev);
mthca_cleanup_uar_table(mdev);
err_close:
IB/mthca: Enable MSI-X by default Recover from MSI-X errors by automatically falling back on regular interrupt, instead of asking the user to do this manually. This makes it possible to enable MSI-X by default, and will make it possible to get rid of the msi_x module option in the future. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07 16:10:34 +03:00
if (mdev->mthca_flags & MTHCA_FLAG_MSI_X)
pci_disable_msix(pdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mthca_close_hca(mdev);
[PATCH] IB/mthca: Encapsulate command interface init Encapsulate mthca command interface initialization/cleanup. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:36:45 -07:00
err_cmd:
mthca_cmd_cleanup(mdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err_free_dev:
ib_dealloc_device(&mdev->ib_dev);
err_free_res:
IB/mthca: Use pci_request_regions() Back in prehistoric (pre-git!) days, the kernel's MSI-X support did request_mem_region() on a device's MSI-X tables, which meant that a driver that enabled MSI-X couldn't use pci_request_regions() (since that would clash with the PCI layer's MSI-X request). However, that was removed (by me!) years ago, so mthca can just use pci_request_regions() and pci_release_regions() instead of its own much more complicated code that avoids requesting the MSI-X tables. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-29 21:37:33 -07:00
pci_release_regions(pdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
err_disable_pdev:
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
return err;
}
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
static void __mthca_remove_one(struct pci_dev *pdev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{
struct mthca_dev *mdev = pci_get_drvdata(pdev);
u8 status;
int p;
if (mdev) {
mthca_free_agents(mdev);
mthca_unregister_device(mdev);
for (p = 1; p <= mdev->limits.num_ports; ++p)
mthca_CLOSE_IB(mdev, p, &status);
mthca_cleanup_mcg_table(mdev);
mthca_cleanup_av_table(mdev);
mthca_cleanup_qp_table(mdev);
[PATCH] IB/mthca: Add SRQ implementation Add mthca support for shared receive queues (SRQs), including userspace SRQs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-19 10:59:31 -07:00
mthca_cleanup_srq_table(mdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
mthca_cleanup_cq_table(mdev);
mthca_cmd_use_polling(mdev);
mthca_cleanup_eq_table(mdev);
mthca_pd_free(mdev, &mdev->driver_pd);
mthca_cleanup_mr_table(mdev);
mthca_cleanup_pd_table(mdev);
iounmap(mdev->kar);
mthca_uar_free(mdev, &mdev->driver_uar);
mthca_cleanup_uar_table(mdev);
mthca_close_hca(mdev);
[PATCH] IB/mthca: Encapsulate command interface init Encapsulate mthca command interface initialization/cleanup. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:36:45 -07:00
mthca_cmd_cleanup(mdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
if (mdev->mthca_flags & MTHCA_FLAG_MSI_X)
pci_disable_msix(pdev);
ib_dealloc_device(&mdev->ib_dev);
IB/mthca: Use pci_request_regions() Back in prehistoric (pre-git!) days, the kernel's MSI-X support did request_mem_region() on a device's MSI-X tables, which meant that a driver that enabled MSI-X couldn't use pci_request_regions() (since that would clash with the PCI layer's MSI-X request). However, that was removed (by me!) years ago, so mthca can just use pci_request_regions() and pci_release_regions() instead of its own much more complicated code that avoids requesting the MSI-X tables. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-29 21:37:33 -07:00
pci_release_regions(pdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
}
}
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
int __mthca_restart_one(struct pci_dev *pdev)
{
struct mthca_dev *mdev;
IB/mthca: Fix use-after-free on device restart Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-17 20:58:30 +03:00
int hca_type;
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
mdev = pci_get_drvdata(pdev);
if (!mdev)
return -ENODEV;
IB/mthca: Fix use-after-free on device restart Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-17 20:58:30 +03:00
hca_type = mdev->hca_type;
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
__mthca_remove_one(pdev);
IB/mthca: Fix use-after-free on device restart Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-17 20:58:30 +03:00
return __mthca_init_one(pdev, hca_type);
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
}
static int __devinit mthca_init_one(struct pci_dev *pdev,
IB/mthca: Fix section mismatches Commit b3b30f5e ("IB/mthca: Recover from catastrophic errors") introduced some section mismatch breakage, because the error recovery code tears down and reinitializes the device, which calls into lots of code originally marked __devinit and __devexit from regular .text. Fix this by getting rid of these now-incorrect section markers. Reported by Randy Dunlap <randy.dunlap@oracle.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:06 -08:00
const struct pci_device_id *id)
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
{
int ret;
mutex_lock(&mthca_device_mutex);
IB: Use printk_once() for driver versions Replace open-coded reimplementations with printk_once(). Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-05 20:24:24 -07:00
printk_once(KERN_INFO "%s", mthca_version);
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
if (id->driver_data >= ARRAY_SIZE(mthca_hca_table)) {
printk(KERN_ERR PFX "%s has invalid driver data %lx\n",
pci_name(pdev), id->driver_data);
mutex_unlock(&mthca_device_mutex);
return -ENODEV;
}
ret = __mthca_init_one(pdev, id->driver_data);
mutex_unlock(&mthca_device_mutex);
return ret;
}
static void __devexit mthca_remove_one(struct pci_dev *pdev)
{
mutex_lock(&mthca_device_mutex);
__mthca_remove_one(pdev);
mutex_unlock(&mthca_device_mutex);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
static struct pci_device_id mthca_pci_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR),
.driver_data = TAVOR },
{ PCI_DEVICE(PCI_VENDOR_ID_TOPSPIN, PCI_DEVICE_ID_MELLANOX_TAVOR),
.driver_data = TAVOR },
{ PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT),
.driver_data = ARBEL_COMPAT },
{ PCI_DEVICE(PCI_VENDOR_ID_TOPSPIN, PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT),
.driver_data = ARBEL_COMPAT },
{ PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_ARBEL),
.driver_data = ARBEL_NATIVE },
{ PCI_DEVICE(PCI_VENDOR_ID_TOPSPIN, PCI_DEVICE_ID_MELLANOX_ARBEL),
.driver_data = ARBEL_NATIVE },
[PATCH] IB/mthca: add support for new MT25204 HCA Decouple table of HCA features from exact HCA device type. Add a current FW version field so we can warn when someone is using old FW. Add support for new MT25204 HCA. Remove the warning about mem-free support, since it should be pretty solid at this point. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:34 -07:00
{ PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_SINAI),
.driver_data = SINAI },
{ PCI_DEVICE(PCI_VENDOR_ID_TOPSPIN, PCI_DEVICE_ID_MELLANOX_SINAI),
.driver_data = SINAI },
{ PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_SINAI_OLD),
.driver_data = SINAI },
{ PCI_DEVICE(PCI_VENDOR_ID_TOPSPIN, PCI_DEVICE_ID_MELLANOX_SINAI_OLD),
.driver_data = SINAI },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
{ 0, }
};
MODULE_DEVICE_TABLE(pci, mthca_pci_table);
static struct pci_driver mthca_driver = {
[PATCH] IB/mthca: Clean up error messages - Fix incorrect cut-n-paste in error messages. - Add missing newlines in error messages. - Use DRV_NAME instead of "ib_mthca" in a couple of places. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 14:36:39 -07:00
.name = DRV_NAME,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
.id_table = mthca_pci_table,
.probe = mthca_init_one,
.remove = __devexit_p(mthca_remove_one)
};
IB/mthca: Add HCA profile module parameters Add module parameters that enable settting some of the HCA profile values, such as the number of QPs, CQs, etc. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-10 13:40:17 +02:00
static void __init __mthca_check_profile_val(const char *name, int *pval,
int pval_default)
{
/* value must be positive and power of 2 */
int old_pval = *pval;
if (old_pval <= 0)
*pval = pval_default;
else
*pval = roundup_pow_of_two(old_pval);
if (old_pval != *pval) {
printk(KERN_WARNING PFX "Invalid value %d for %s in module parameter.\n",
old_pval, name);
printk(KERN_WARNING PFX "Corrected %s to %d.\n", name, *pval);
}
}
#define mthca_check_profile_val(name, default) \
__mthca_check_profile_val(#name, &hca_profile.name, default)
static void __init mthca_validate_profile(void)
{
mthca_check_profile_val(num_qp, MTHCA_DEFAULT_NUM_QP);
mthca_check_profile_val(rdb_per_qp, MTHCA_DEFAULT_RDB_PER_QP);
mthca_check_profile_val(num_cq, MTHCA_DEFAULT_NUM_CQ);
mthca_check_profile_val(num_mcg, MTHCA_DEFAULT_NUM_MCG);
mthca_check_profile_val(num_mpt, MTHCA_DEFAULT_NUM_MPT);
mthca_check_profile_val(num_mtt, MTHCA_DEFAULT_NUM_MTT);
mthca_check_profile_val(num_udav, MTHCA_DEFAULT_NUM_UDAV);
mthca_check_profile_val(fmr_reserved_mtts, MTHCA_DEFAULT_NUM_RESERVED_MTTS);
if (hca_profile.fmr_reserved_mtts >= hca_profile.num_mtt) {
printk(KERN_WARNING PFX "Invalid fmr_reserved_mtts module parameter %d.\n",
hca_profile.fmr_reserved_mtts);
printk(KERN_WARNING PFX "(Must be smaller than num_mtt %d)\n",
hca_profile.num_mtt);
hca_profile.fmr_reserved_mtts = hca_profile.num_mtt / 2;
printk(KERN_WARNING PFX "Corrected fmr_reserved_mtts to %d.\n",
hca_profile.fmr_reserved_mtts);
}
IB/mthca: Add module parameter for number of MTTs per segment The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-05-27 14:36:16 -07:00
if ((log_mtts_per_seg < 1) || (log_mtts_per_seg > 5)) {
printk(KERN_WARNING PFX "bad log_mtts_per_seg (%d). Using default - %d\n",
log_mtts_per_seg, ilog2(MTHCA_MTT_SEG_SIZE / 8));
log_mtts_per_seg = ilog2(MTHCA_MTT_SEG_SIZE / 8);
}
IB/mthca: Add HCA profile module parameters Add module parameters that enable settting some of the HCA profile values, such as the number of QPs, CQs, etc. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-10 13:40:17 +02:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
static int __init mthca_init(void)
{
int ret;
IB/mthca: Add HCA profile module parameters Add module parameters that enable settting some of the HCA profile values, such as the number of QPs, CQs, etc. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-10 13:40:17 +02:00
mthca_validate_profile();
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
ret = mthca_catas_init();
if (ret)
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
ret = pci_register_driver(&mthca_driver);
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
if (ret < 0) {
mthca_catas_cleanup();
return ret;
}
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
static void __exit mthca_cleanup(void)
{
pci_unregister_driver(&mthca_driver);
IB/mthca: Recover from catastrophic errors Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 21:11:18 +03:00
mthca_catas_cleanup();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
}
module_init(mthca_init);
module_exit(mthca_cleanup);
Reference in New Issue Copy Permalink