2005-04-17 02:20:36 +04:00
/* qlogicpti.h: Performance Technologies QlogicISP sbus card defines.
*
* Copyright ( C ) 1996 David S . Miller ( davem @ caipfs . rutgers . edu )
*/
# ifndef _QLOGICPTI_H
# define _QLOGICPTI_H
/* Qlogic/SBUS controller registers. */
# define SBUS_CFG1 0x006UL
# define SBUS_CTRL 0x008UL
# define SBUS_STAT 0x00aUL
# define SBUS_SEMAPHORE 0x00cUL
# define CMD_DMA_CTRL 0x022UL
# define DATA_DMA_CTRL 0x042UL
# define MBOX0 0x080UL
# define MBOX1 0x082UL
# define MBOX2 0x084UL
# define MBOX3 0x086UL
# define MBOX4 0x088UL
# define MBOX5 0x08aUL
# define CPU_CMD 0x214UL
# define CPU_ORIDE 0x224UL
# define CPU_PCTRL 0x272UL
# define CPU_PDIFF 0x276UL
# define RISC_PSR 0x420UL
# define RISC_MTREG 0x42EUL
# define HCCTRL 0x440UL
/* SCSI parameters for this driver. */
# define MAX_TARGETS 16
# define MAX_LUNS 8
/* With the qlogic interface, every queue slot can hold a SCSI
* command with up to 4 scatter / gather entries . If we need more
* than 4 entries , continuation entries can be used that hold
* another 7 entries each . Unlike for other drivers , this means
* that the maximum number of scatter / gather entries we can
* support at any given time is a function of the number of queue
* slots available . That is , host - > can_queue and host - > sg_tablesize
* are dynamic and _not_ independent . This all works fine because
* requests are queued serially and the scatter / gather limit is
* determined for each queue request anew .
*/
# define QLOGICPTI_REQ_QUEUE_LEN 255 /* must be power of two - 1 */
# define QLOGICPTI_MAX_SG(ql) (4 + ((ql) > 0) ? 7*((ql) - 1) : 0)
/* mailbox command complete status codes */
# define MBOX_COMMAND_COMPLETE 0x4000
# define INVALID_COMMAND 0x4001
# define HOST_INTERFACE_ERROR 0x4002
# define TEST_FAILED 0x4003
# define COMMAND_ERROR 0x4005
# define COMMAND_PARAM_ERROR 0x4006
/* async event status codes */
# define ASYNC_SCSI_BUS_RESET 0x8001
# define SYSTEM_ERROR 0x8002
# define REQUEST_TRANSFER_ERROR 0x8003
# define RESPONSE_TRANSFER_ERROR 0x8004
# define REQUEST_QUEUE_WAKEUP 0x8005
# define EXECUTION_TIMEOUT_RESET 0x8006
/* Am I fucking pedantic or what? */
struct Entry_header {
# ifdef __BIG_ENDIAN
u8 entry_cnt ;
u8 entry_type ;
u8 flags ;
u8 sys_def_1 ;
# else /* __LITTLE_ENDIAN */
u8 entry_type ;
u8 entry_cnt ;
u8 sys_def_1 ;
u8 flags ;
# endif
} ;
/* entry header type commands */
# define ENTRY_COMMAND 1
# define ENTRY_CONTINUATION 2
# define ENTRY_STATUS 3
# define ENTRY_MARKER 4
# define ENTRY_EXTENDED_COMMAND 5
/* entry header flag definitions */
# define EFLAG_CONTINUATION 1
# define EFLAG_BUSY 2
# define EFLAG_BAD_HEADER 4
# define EFLAG_BAD_PAYLOAD 8
struct dataseg {
u32 d_base ;
u32 d_count ;
} ;
struct Command_Entry {
struct Entry_header hdr ;
u32 handle ;
# ifdef __BIG_ENDIAN
u8 target_id ;
u8 target_lun ;
# else /* __LITTLE_ENDIAN */
u8 target_lun ;
u8 target_id ;
# endif
u16 cdb_length ;
u16 control_flags ;
u16 rsvd ;
u16 time_out ;
u16 segment_cnt ;
u8 cdb [ 12 ] ;
struct dataseg dataseg [ 4 ] ;
} ;
/* command entry control flag definitions */
# define CFLAG_NODISC 0x01
# define CFLAG_HEAD_TAG 0x02
# define CFLAG_ORDERED_TAG 0x04
# define CFLAG_SIMPLE_TAG 0x08
# define CFLAG_TAR_RTN 0x10
# define CFLAG_READ 0x20
# define CFLAG_WRITE 0x40
struct Ext_Command_Entry {
struct Entry_header hdr ;
u32 handle ;
# ifdef __BIG_ENDIAN
u8 target_id ;
u8 target_lun ;
# else /* __LITTLE_ENDIAN */
u8 target_lun ;
u8 target_id ;
# endif
u16 cdb_length ;
u16 control_flags ;
u16 rsvd ;
u16 time_out ;
u16 segment_cnt ;
u8 cdb [ 44 ] ;
} ;
struct Continuation_Entry {
struct Entry_header hdr ;
u32 reserved ;
struct dataseg dataseg [ 7 ] ;
} ;
struct Marker_Entry {
struct Entry_header hdr ;
u32 reserved ;
# ifdef __BIG_ENDIAN
u8 target_id ;
u8 target_lun ;
# else /* __LITTLE_ENDIAN */
u8 target_lun ;
u8 target_id ;
# endif
# ifdef __BIG_ENDIAN
u8 rsvd ;
u8 modifier ;
# else /* __LITTLE_ENDIAN */
u8 modifier ;
u8 rsvd ;
# endif
u8 rsvds [ 52 ] ;
} ;
/* marker entry modifier definitions */
# define SYNC_DEVICE 0
# define SYNC_TARGET 1
# define SYNC_ALL 2
struct Status_Entry {
struct Entry_header hdr ;
u32 handle ;
u16 scsi_status ;
u16 completion_status ;
u16 state_flags ;
u16 status_flags ;
u16 time ;
u16 req_sense_len ;
u32 residual ;
u8 rsvd [ 8 ] ;
u8 req_sense_data [ 32 ] ;
} ;
/* status entry completion status definitions */
# define CS_COMPLETE 0x0000
# define CS_INCOMPLETE 0x0001
# define CS_DMA_ERROR 0x0002
# define CS_TRANSPORT_ERROR 0x0003
# define CS_RESET_OCCURRED 0x0004
# define CS_ABORTED 0x0005
# define CS_TIMEOUT 0x0006
# define CS_DATA_OVERRUN 0x0007
# define CS_COMMAND_OVERRUN 0x0008
# define CS_STATUS_OVERRUN 0x0009
# define CS_BAD_MESSAGE 0x000a
# define CS_NO_MESSAGE_OUT 0x000b
# define CS_EXT_ID_FAILED 0x000c
# define CS_IDE_MSG_FAILED 0x000d
# define CS_ABORT_MSG_FAILED 0x000e
# define CS_REJECT_MSG_FAILED 0x000f
# define CS_NOP_MSG_FAILED 0x0010
# define CS_PARITY_ERROR_MSG_FAILED 0x0011
# define CS_DEVICE_RESET_MSG_FAILED 0x0012
# define CS_ID_MSG_FAILED 0x0013
# define CS_UNEXP_BUS_FREE 0x0014
# define CS_DATA_UNDERRUN 0x0015
# define CS_BUS_RESET 0x001c
/* status entry state flag definitions */
# define SF_GOT_BUS 0x0100
# define SF_GOT_TARGET 0x0200
# define SF_SENT_CDB 0x0400
# define SF_TRANSFERRED_DATA 0x0800
# define SF_GOT_STATUS 0x1000
# define SF_GOT_SENSE 0x2000
/* status entry status flag definitions */
# define STF_DISCONNECT 0x0001
# define STF_SYNCHRONOUS 0x0002
# define STF_PARITY_ERROR 0x0004
# define STF_BUS_RESET 0x0008
# define STF_DEVICE_RESET 0x0010
# define STF_ABORTED 0x0020
# define STF_TIMEOUT 0x0040
# define STF_NEGOTIATION 0x0080
/* mailbox commands */
# define MBOX_NO_OP 0x0000
# define MBOX_LOAD_RAM 0x0001
# define MBOX_EXEC_FIRMWARE 0x0002
# define MBOX_DUMP_RAM 0x0003
# define MBOX_WRITE_RAM_WORD 0x0004
# define MBOX_READ_RAM_WORD 0x0005
# define MBOX_MAILBOX_REG_TEST 0x0006
# define MBOX_VERIFY_CHECKSUM 0x0007
# define MBOX_ABOUT_FIRMWARE 0x0008
# define MBOX_CHECK_FIRMWARE 0x000e
# define MBOX_INIT_REQ_QUEUE 0x0010
# define MBOX_INIT_RES_QUEUE 0x0011
# define MBOX_EXECUTE_IOCB 0x0012
# define MBOX_WAKE_UP 0x0013
# define MBOX_STOP_FIRMWARE 0x0014
# define MBOX_ABORT 0x0015
# define MBOX_ABORT_DEVICE 0x0016
# define MBOX_ABORT_TARGET 0x0017
# define MBOX_BUS_RESET 0x0018
# define MBOX_STOP_QUEUE 0x0019
# define MBOX_START_QUEUE 0x001a
# define MBOX_SINGLE_STEP_QUEUE 0x001b
# define MBOX_ABORT_QUEUE 0x001c
# define MBOX_GET_DEV_QUEUE_STATUS 0x001d
# define MBOX_GET_FIRMWARE_STATUS 0x001f
# define MBOX_GET_INIT_SCSI_ID 0x0020
# define MBOX_GET_SELECT_TIMEOUT 0x0021
# define MBOX_GET_RETRY_COUNT 0x0022
# define MBOX_GET_TAG_AGE_LIMIT 0x0023
# define MBOX_GET_CLOCK_RATE 0x0024
# define MBOX_GET_ACT_NEG_STATE 0x0025
# define MBOX_GET_ASYNC_DATA_SETUP_TIME 0x0026
# define MBOX_GET_SBUS_PARAMS 0x0027
# define MBOX_GET_TARGET_PARAMS 0x0028
# define MBOX_GET_DEV_QUEUE_PARAMS 0x0029
# define MBOX_SET_INIT_SCSI_ID 0x0030
# define MBOX_SET_SELECT_TIMEOUT 0x0031
# define MBOX_SET_RETRY_COUNT 0x0032
# define MBOX_SET_TAG_AGE_LIMIT 0x0033
# define MBOX_SET_CLOCK_RATE 0x0034
# define MBOX_SET_ACTIVE_NEG_STATE 0x0035
# define MBOX_SET_ASYNC_DATA_SETUP_TIME 0x0036
# define MBOX_SET_SBUS_CONTROL_PARAMS 0x0037
# define MBOX_SET_TARGET_PARAMS 0x0038
# define MBOX_SET_DEV_QUEUE_PARAMS 0x0039
struct host_param {
u_short initiator_scsi_id ;
u_short bus_reset_delay ;
u_short retry_count ;
u_short retry_delay ;
u_short async_data_setup_time ;
u_short req_ack_active_negation ;
u_short data_line_active_negation ;
u_short data_dma_burst_enable ;
u_short command_dma_burst_enable ;
u_short tag_aging ;
u_short selection_timeout ;
u_short max_queue_depth ;
} ;
/*
* Device Flags :
*
* Bit Name
* - - - - - - - - -
* 7 Disconnect Privilege
* 6 Parity Checking
* 5 Wide Data Transfers
* 4 Synchronous Data Transfers
* 3 Tagged Queuing
* 2 Automatic Request Sense
* 1 Stop Queue on Check Condition
* 0 Renegotiate on Error
*/
struct dev_param {
u_short device_flags ;
u_short execution_throttle ;
u_short synchronous_period ;
u_short synchronous_offset ;
u_short device_enable ;
u_short reserved ; /* pad */
} ;
/*
* The result queue can be quite a bit smaller since continuation entries
* do not show up there :
*/
# define RES_QUEUE_LEN 255 /* Must be power of two - 1 */
# define QUEUE_ENTRY_LEN 64
# define NEXT_REQ_PTR(wheee) (((wheee) + 1) & QLOGICPTI_REQ_QUEUE_LEN)
# define NEXT_RES_PTR(wheee) (((wheee) + 1) & RES_QUEUE_LEN)
# define PREV_REQ_PTR(wheee) (((wheee) - 1) & QLOGICPTI_REQ_QUEUE_LEN)
# define PREV_RES_PTR(wheee) (((wheee) - 1) & RES_QUEUE_LEN)
struct pti_queue_entry {
char __opaque [ QUEUE_ENTRY_LEN ] ;
} ;
struct scsi_cmnd ;
/* Software state for the driver. */
struct qlogicpti {
/* These are the hot elements in the cache, so they come first. */
void __iomem * qregs ; /* Adapter registers */
struct pti_queue_entry * res_cpu ; /* Ptr to RESPONSE bufs (CPU) */
struct pti_queue_entry * req_cpu ; /* Ptr to REQUEST bufs (CPU) */
u_int req_in_ptr ; /* index of next request slot */
u_int res_out_ptr ; /* index of next result slot */
long send_marker ; /* must we send a marker? */
struct sbus_dev * sdev ;
unsigned long __pad ;
int cmd_count [ MAX_TARGETS ] ;
unsigned long tag_ages [ MAX_TARGETS ] ;
/* The cmd->handler is only 32-bits, so that things work even on monster
* Ex000 sparc64 machines with > 4 GB of ram we just keep track of the
* scsi command pointers here . This is essentially what Matt Jacob does . - DaveM
*/
struct scsi_cmnd * cmd_slots [ QLOGICPTI_REQ_QUEUE_LEN + 1 ] ;
/* The rest of the elements are unimportant for performance. */
struct qlogicpti * next ;
__u32 res_dvma ; /* Ptr to RESPONSE bufs (DVMA)*/
__u32 req_dvma ; /* Ptr to REQUEST bufs (DVMA) */
u_char fware_majrev , fware_minrev , fware_micrev ;
struct Scsi_Host * qhost ;
int qpti_id ;
int scsi_id ;
int prom_node ;
char prom_name [ 64 ] ;
int irq ;
char differential , ultra , clock ;
unsigned char bursts ;
struct host_param host_param ;
struct dev_param dev_param [ MAX_TARGETS ] ;
void __iomem * sreg ;
# define SREG_TPOWER 0x80 /* State of termpwr */
# define SREG_FUSE 0x40 /* State of on board fuse */
# define SREG_PDISAB 0x20 /* Disable state for power on */
# define SREG_DSENSE 0x10 /* Sense for differential */
# define SREG_IMASK 0x0c /* Interrupt level */
# define SREG_SPMASK 0x03 /* Mask for switch pack */
unsigned char swsreg ;
unsigned int
gotirq : 1 , /* this instance got an irq */
2007-10-01 18:07:52 +04:00
is_pti : 1 ; /* Non-zero if this is a PTI board. */
2005-04-17 02:20:36 +04:00
} ;
/* How to twiddle them bits... */
/* SBUS config register one. */
# define SBUS_CFG1_EPAR 0x0100 /* Enable parity checking */
# define SBUS_CFG1_FMASK 0x00f0 /* Forth code cycle mask */
# define SBUS_CFG1_BENAB 0x0004 /* Burst dvma enable */
# define SBUS_CFG1_B64 0x0003 /* Enable 64byte bursts */
# define SBUS_CFG1_B32 0x0002 /* Enable 32byte bursts */
# define SBUS_CFG1_B16 0x0001 /* Enable 16byte bursts */
# define SBUS_CFG1_B8 0x0008 /* Enable 8byte bursts */
/* SBUS control register */
# define SBUS_CTRL_EDIRQ 0x0020 /* Enable Data DVMA Interrupts */
# define SBUS_CTRL_ECIRQ 0x0010 /* Enable Command DVMA Interrupts */
# define SBUS_CTRL_ESIRQ 0x0008 /* Enable SCSI Processor Interrupts */
# define SBUS_CTRL_ERIRQ 0x0004 /* Enable RISC Processor Interrupts */
# define SBUS_CTRL_GENAB 0x0002 /* Global Interrupt Enable */
# define SBUS_CTRL_RESET 0x0001 /* Soft Reset */
/* SBUS status register */
# define SBUS_STAT_DINT 0x0020 /* Data DVMA IRQ pending */
# define SBUS_STAT_CINT 0x0010 /* Command DVMA IRQ pending */
# define SBUS_STAT_SINT 0x0008 /* SCSI Processor IRQ pending */
# define SBUS_STAT_RINT 0x0004 /* RISC Processor IRQ pending */
# define SBUS_STAT_GINT 0x0002 /* Global IRQ pending */
/* SBUS semaphore register */
# define SBUS_SEMAPHORE_STAT 0x0002 /* Semaphore status bit */
# define SBUS_SEMAPHORE_LCK 0x0001 /* Semaphore lock bit */
/* DVMA control register */
# define DMA_CTRL_CSUSPEND 0x0010 /* DMA channel suspend */
# define DMA_CTRL_CCLEAR 0x0008 /* DMA channel clear and reset */
# define DMA_CTRL_FCLEAR 0x0004 /* DMA fifo clear */
# define DMA_CTRL_CIRQ 0x0002 /* DMA irq clear */
# define DMA_CTRL_DMASTART 0x0001 /* DMA transfer start */
/* SCSI processor override register */
# define CPU_ORIDE_ETRIG 0x8000 /* External trigger enable */
# define CPU_ORIDE_STEP 0x4000 /* Single step mode enable */
# define CPU_ORIDE_BKPT 0x2000 /* Breakpoint reg enable */
# define CPU_ORIDE_PWRITE 0x1000 /* SCSI pin write enable */
# define CPU_ORIDE_OFORCE 0x0800 /* Force outputs on */
# define CPU_ORIDE_LBACK 0x0400 /* SCSI loopback enable */
# define CPU_ORIDE_PTEST 0x0200 /* Parity test enable */
# define CPU_ORIDE_TENAB 0x0100 /* SCSI pins tristate enable */
# define CPU_ORIDE_TPINS 0x0080 /* SCSI pins enable */
# define CPU_ORIDE_FRESET 0x0008 /* FIFO reset */
# define CPU_ORIDE_CTERM 0x0004 /* Command terminate */
# define CPU_ORIDE_RREG 0x0002 /* Reset SCSI processor regs */
# define CPU_ORIDE_RMOD 0x0001 /* Reset SCSI processor module */
/* SCSI processor commands */
# define CPU_CMD_BRESET 0x300b /* Reset SCSI bus */
/* SCSI processor pin control register */
# define CPU_PCTRL_PVALID 0x8000 /* Phase bits are valid */
# define CPU_PCTRL_PHI 0x0400 /* Parity bit high */
# define CPU_PCTRL_PLO 0x0200 /* Parity bit low */
# define CPU_PCTRL_REQ 0x0100 /* REQ bus signal */
# define CPU_PCTRL_ACK 0x0080 /* ACK bus signal */
# define CPU_PCTRL_RST 0x0040 /* RST bus signal */
# define CPU_PCTRL_BSY 0x0020 /* BSY bus signal */
# define CPU_PCTRL_SEL 0x0010 /* SEL bus signal */
# define CPU_PCTRL_ATN 0x0008 /* ATN bus signal */
# define CPU_PCTRL_MSG 0x0004 /* MSG bus signal */
# define CPU_PCTRL_CD 0x0002 /* CD bus signal */
# define CPU_PCTRL_IO 0x0001 /* IO bus signal */
/* SCSI processor differential pins register */
# define CPU_PDIFF_SENSE 0x0200 /* Differential sense */
# define CPU_PDIFF_MODE 0x0100 /* Differential mode */
# define CPU_PDIFF_OENAB 0x0080 /* Outputs enable */
# define CPU_PDIFF_PMASK 0x007c /* Differential control pins */
# define CPU_PDIFF_TGT 0x0002 /* Target mode enable */
# define CPU_PDIFF_INIT 0x0001 /* Initiator mode enable */
/* RISC processor status register */
# define RISC_PSR_FTRUE 0x8000 /* Force true */
# define RISC_PSR_LCD 0x4000 /* Loop counter shows done status */
# define RISC_PSR_RIRQ 0x2000 /* RISC irq status */
# define RISC_PSR_TOFLOW 0x1000 /* Timer overflow (rollover) */
# define RISC_PSR_AOFLOW 0x0800 /* Arithmetic overflow */
# define RISC_PSR_AMSB 0x0400 /* Arithmetic big endian */
# define RISC_PSR_ACARRY 0x0200 /* Arithmetic carry */
# define RISC_PSR_AZERO 0x0100 /* Arithmetic zero */
# define RISC_PSR_ULTRA 0x0020 /* Ultra mode */
# define RISC_PSR_DIRQ 0x0010 /* DVMA interrupt */
# define RISC_PSR_SIRQ 0x0008 /* SCSI processor interrupt */
# define RISC_PSR_HIRQ 0x0004 /* Host interrupt */
# define RISC_PSR_IPEND 0x0002 /* Interrupt pending */
# define RISC_PSR_FFALSE 0x0001 /* Force false */
/* RISC processor memory timing register */
# define RISC_MTREG_P1DFLT 0x1200 /* Default read/write timing, pg1 */
# define RISC_MTREG_P0DFLT 0x0012 /* Default read/write timing, pg0 */
# define RISC_MTREG_P1ULTRA 0x2300 /* Ultra-mode rw timing, pg1 */
# define RISC_MTREG_P0ULTRA 0x0023 /* Ultra-mode rw timing, pg0 */
/* Host command/ctrl register */
# define HCCTRL_NOP 0x0000 /* CMD: No operation */
# define HCCTRL_RESET 0x1000 /* CMD: Reset RISC cpu */
# define HCCTRL_PAUSE 0x2000 /* CMD: Pause RISC cpu */
# define HCCTRL_REL 0x3000 /* CMD: Release paused RISC cpu */
# define HCCTRL_STEP 0x4000 /* CMD: Single step RISC cpu */
# define HCCTRL_SHIRQ 0x5000 /* CMD: Set host irq */
# define HCCTRL_CHIRQ 0x6000 /* CMD: Clear host irq */
# define HCCTRL_CRIRQ 0x7000 /* CMD: Clear RISC cpu irq */
# define HCCTRL_BKPT 0x8000 /* CMD: Breakpoint enables change */
# define HCCTRL_TMODE 0xf000 /* CMD: Enable test mode */
# define HCCTRL_HIRQ 0x0080 /* Host IRQ pending */
# define HCCTRL_RRIP 0x0040 /* RISC cpu reset in happening now */
# define HCCTRL_RPAUSED 0x0020 /* RISC cpu is paused now */
# define HCCTRL_EBENAB 0x0010 /* External breakpoint enable */
# define HCCTRL_B1ENAB 0x0008 /* Breakpoint 1 enable */
# define HCCTRL_B0ENAB 0x0004 /* Breakpoint 0 enable */
/* For our interrupt engine. */
# define for_each_qlogicpti(qp) \
for ( ( qp ) = qptichain ; ( qp ) ; ( qp ) = ( qp ) - > next )
# endif /* !(_QLOGICPTI_H) */
