2018-09-12 04:16:07 +03:00
// SPDX-License-Identifier: GPL-2.0
2012-11-29 08:28:09 +04:00
/*
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
* fs / f2fs / node . c
*
* Copyright ( c ) 2012 Samsung Electronics Co . , Ltd .
* http : //www.samsung.com/
*/
# include <linux/fs.h>
# include <linux/f2fs_fs.h>
# include <linux/mpage.h>
mm: introduce memalloc_retry_wait()
Various places in the kernel - largely in filesystems - respond to a
memory allocation failure by looping around and re-trying. Some of
these cannot conveniently use __GFP_NOFAIL, for reasons such as:
- a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on
- a need to check for the process being signalled between failures
- the possibility that other recovery actions could be performed
- the allocation is quite deep in support code, and passing down an
extra flag to say if __GFP_NOFAIL is wanted would be clumsy.
Many of these currently use congestion_wait() which (in almost all
cases) simply waits the given timeout - congestion isn't tracked for
most devices.
It isn't clear what the best delay is for loops, but it is clear that
the various filesystems shouldn't be responsible for choosing a timeout.
This patch introduces memalloc_retry_wait() with takes on that
responsibility. Code that wants to retry a memory allocation can call
this function passing the GFP flags that were used. It will wait
however is appropriate.
For now, it only considers __GFP_NORETRY and whatever
gfpflags_allow_blocking() tests. If blocking is allowed without
__GFP_NORETRY, then alloc_page either made some reclaim progress, or
waited for a while, before failing. So there is no need for much
further waiting. memalloc_retry_wait() will wait until the current
jiffie ends. If this condition is not met, then alloc_page() won't have
waited much if at all. In that case memalloc_retry_wait() waits about
200ms. This is the delay that most current loops uses.
linux/sched/mm.h needs to be included in some files now,
but linux/backing-dev.h does not.
Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 01:07:14 +03:00
# include <linux/sched/mm.h>
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
# include <linux/blkdev.h>
# include <linux/pagevec.h>
# include <linux/swap.h>
# include "f2fs.h"
# include "node.h"
# include "segment.h"
2017-07-18 04:48:12 +03:00
# include "xattr.h"
2021-08-20 06:52:28 +03:00
# include "iostat.h"
2013-04-19 20:28:52 +04:00
# include <trace/events/f2fs.h>
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
# define on_f2fs_build_free_nids(nmi) mutex_is_locked(&(nm_i)->build_lock)
2014-02-21 14:08:29 +04:00
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
static struct kmem_cache * nat_entry_slab ;
static struct kmem_cache * free_nid_slab ;
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
static struct kmem_cache * nat_entry_set_slab ;
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
static struct kmem_cache * fsync_node_entry_slab ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2018-04-24 08:02:31 +03:00
/*
* Check whether the given nid is within node id range .
*/
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
int f2fs_check_nid_range ( struct f2fs_sb_info * sbi , nid_t nid )
2018-04-24 08:02:31 +03:00
{
if ( unlikely ( nid < F2FS_ROOT_INO ( sbi ) | | nid > = NM_I ( sbi ) - > max_nid ) ) {
set_sbi_flag ( sbi , SBI_NEED_FSCK ) ;
2019-06-18 12:48:42 +03:00
f2fs_warn ( sbi , " %s: out-of-range nid=%x, run fsck to fix. " ,
__func__ , nid ) ;
2022-09-28 18:38:54 +03:00
f2fs_handle_error ( sbi , ERROR_CORRUPTED_INODE ) ;
2019-06-20 06:36:14 +03:00
return - EFSCORRUPTED ;
2018-04-24 08:02:31 +03:00
}
return 0 ;
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
bool f2fs_available_free_memory ( struct f2fs_sb_info * sbi , int type )
2014-03-19 08:31:37 +04:00
{
2014-04-16 05:47:06 +04:00
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
2021-03-16 12:29:18 +03:00
struct discard_cmd_control * dcc = SM_I ( sbi ) - > dcc_info ;
2014-03-19 08:31:37 +04:00
struct sysinfo val ;
2014-11-07 02:24:46 +03:00
unsigned long avail_ram ;
2014-03-19 08:31:37 +04:00
unsigned long mem_size = 0 ;
2014-04-16 05:47:06 +04:00
bool res = false ;
2014-03-19 08:31:37 +04:00
2021-03-16 12:29:18 +03:00
if ( ! nm_i )
return true ;
2014-03-19 08:31:37 +04:00
si_meminfo ( & val ) ;
2014-11-07 02:24:46 +03:00
/* only uses low memory */
avail_ram = val . totalram - val . totalhigh ;
2015-02-05 12:54:31 +03:00
/*
2022-12-02 04:37:15 +03:00
* give 25 % , 25 % , 50 % , 50 % , 25 % , 25 % memory for each components respectively
2015-02-05 12:54:31 +03:00
*/
2014-04-16 05:47:06 +04:00
if ( type = = FREE_NIDS ) {
2017-09-29 08:59:35 +03:00
mem_size = ( nm_i - > nid_cnt [ FREE_NID ] *
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
sizeof ( struct free_nid ) ) > > PAGE_SHIFT ;
2014-11-07 02:24:46 +03:00
res = mem_size < ( ( avail_ram * nm_i - > ram_thresh / 100 ) > > 2 ) ;
2014-04-16 05:47:06 +04:00
} else if ( type = = NAT_ENTRIES ) {
2020-11-07 00:22:05 +03:00
mem_size = ( nm_i - > nat_cnt [ TOTAL_NAT ] *
sizeof ( struct nat_entry ) ) > > PAGE_SHIFT ;
2014-11-07 02:24:46 +03:00
res = mem_size < ( ( avail_ram * nm_i - > ram_thresh / 100 ) > > 2 ) ;
2016-06-03 01:24:24 +03:00
if ( excess_cached_nats ( sbi ) )
res = false ;
2015-10-08 20:40:07 +03:00
} else if ( type = = DIRTY_DENTS ) {
if ( sbi - > sb - > s_bdi - > wb . dirty_exceeded )
return false ;
mem_size = get_pages ( sbi , F2FS_DIRTY_DENTS ) ;
res = mem_size < ( ( avail_ram * nm_i - > ram_thresh / 100 ) > > 1 ) ;
2014-11-07 02:24:46 +03:00
} else if ( type = = INO_ENTRIES ) {
int i ;
2017-09-29 08:59:38 +03:00
for ( i = 0 ; i < MAX_INO_ENTRY ; i + + )
2017-03-18 04:26:13 +03:00
mem_size + = sbi - > im [ i ] . ino_num *
sizeof ( struct ino_entry ) ;
mem_size > > = PAGE_SHIFT ;
2014-11-07 02:24:46 +03:00
res = mem_size < ( ( avail_ram * nm_i - > ram_thresh / 100 ) > > 1 ) ;
2022-12-02 04:37:15 +03:00
} else if ( type = = READ_EXTENT_CACHE | | type = = AGE_EXTENT_CACHE ) {
enum extent_type etype = type = = READ_EXTENT_CACHE ?
EX_READ : EX_BLOCK_AGE ;
struct extent_tree_info * eti = & sbi - > extent_tree [ etype ] ;
2022-11-30 20:26:29 +03:00
mem_size = ( atomic_read ( & eti - > total_ext_tree ) *
2015-12-22 06:20:15 +03:00
sizeof ( struct extent_tree ) +
2022-11-30 20:26:29 +03:00
atomic_read ( & eti - > total_ext_node ) *
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
sizeof ( struct extent_node ) ) > > PAGE_SHIFT ;
2022-12-02 04:37:15 +03:00
res = mem_size < ( ( avail_ram * nm_i - > ram_thresh / 100 ) > > 2 ) ;
2021-03-16 12:29:18 +03:00
} else if ( type = = DISCARD_CACHE ) {
mem_size = ( atomic_read ( & dcc - > discard_cmd_cnt ) *
sizeof ( struct discard_cmd ) ) > > PAGE_SHIFT ;
res = mem_size < ( avail_ram * nm_i - > ram_thresh / 100 ) ;
2021-05-20 14:51:50 +03:00
} else if ( type = = COMPRESS_PAGE ) {
# ifdef CONFIG_F2FS_FS_COMPRESSION
unsigned long free_ram = val . freeram ;
/*
* free memory is lower than watermark or cached page count
* exceed threshold , deny caching compress page .
*/
res = ( free_ram > avail_ram * sbi - > compress_watermark / 100 ) & &
( COMPRESS_MAPPING ( sbi ) - > nrpages <
free_ram * sbi - > compress_percent / 100 ) ;
# else
res = false ;
# endif
2014-12-09 17:08:59 +03:00
} else {
2016-01-10 03:14:08 +03:00
if ( ! sbi - > sb - > s_bdi - > wb . dirty_exceeded )
return true ;
2014-04-16 05:47:06 +04:00
}
return res ;
2014-03-19 08:31:37 +04:00
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
static void clear_node_page_dirty ( struct page * page )
{
if ( PageDirty ( page ) ) {
2017-12-05 04:25:25 +03:00
f2fs_clear_page_cache_dirty_tag ( page ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
clear_page_dirty_for_io ( page ) ;
2018-05-26 13:03:35 +03:00
dec_page_count ( F2FS_P_SB ( page ) , F2FS_DIRTY_NODES ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
ClearPageUptodate ( page ) ;
}
static struct page * get_current_nat_page ( struct f2fs_sb_info * sbi , nid_t nid )
{
2020-10-25 17:35:47 +03:00
return f2fs_get_meta_page_retry ( sbi , current_nat_addr ( sbi , nid ) ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
static struct page * get_next_nat_page ( struct f2fs_sb_info * sbi , nid_t nid )
{
struct page * src_page ;
struct page * dst_page ;
pgoff_t dst_off ;
void * src_addr ;
void * dst_addr ;
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
2018-07-17 15:41:46 +03:00
dst_off = next_nat_addr ( sbi , current_nat_addr ( sbi , nid ) ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
/* get current nat block page with lock */
2018-07-17 15:41:46 +03:00
src_page = get_current_nat_page ( sbi , nid ) ;
2018-09-18 03:36:06 +03:00
if ( IS_ERR ( src_page ) )
return src_page ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
dst_page = f2fs_grab_meta_page ( sbi , dst_off ) ;
2014-09-03 02:52:58 +04:00
f2fs_bug_on ( sbi , PageDirty ( src_page ) ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
src_addr = page_address ( src_page ) ;
dst_addr = page_address ( dst_page ) ;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
memcpy ( dst_addr , src_addr , PAGE_SIZE ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
set_page_dirty ( dst_page ) ;
f2fs_put_page ( src_page , 1 ) ;
set_to_next_nat ( nm_i , nid ) ;
return dst_page ;
}
2021-08-09 03:24:48 +03:00
static struct nat_entry * __alloc_nat_entry ( struct f2fs_sb_info * sbi ,
nid_t nid , bool no_fail )
2017-11-11 00:36:51 +03:00
{
struct nat_entry * new ;
2021-08-09 03:24:48 +03:00
new = f2fs_kmem_cache_alloc ( nat_entry_slab ,
GFP_F2FS_ZERO , no_fail , sbi ) ;
2017-11-11 00:36:51 +03:00
if ( new ) {
nat_set_nid ( new , nid ) ;
nat_reset_flag ( new ) ;
}
return new ;
}
static void __free_nat_entry ( struct nat_entry * e )
{
kmem_cache_free ( nat_entry_slab , e ) ;
}
/* must be locked by nat_tree_lock */
static struct nat_entry * __init_nat_entry ( struct f2fs_nm_info * nm_i ,
struct nat_entry * ne , struct f2fs_nat_entry * raw_ne , bool no_fail )
{
if ( no_fail )
f2fs_radix_tree_insert ( & nm_i - > nat_root , nat_get_nid ( ne ) , ne ) ;
else if ( radix_tree_insert ( & nm_i - > nat_root , nat_get_nid ( ne ) , ne ) )
return NULL ;
if ( raw_ne )
node_info_from_raw_nat ( & ne - > ni , raw_ne ) ;
2018-08-05 18:08:59 +03:00
spin_lock ( & nm_i - > nat_list_lock ) ;
2017-11-11 00:36:51 +03:00
list_add_tail ( & ne - > list , & nm_i - > nat_entries ) ;
2018-08-05 18:08:59 +03:00
spin_unlock ( & nm_i - > nat_list_lock ) ;
2020-11-07 00:22:05 +03:00
nm_i - > nat_cnt [ TOTAL_NAT ] + + ;
nm_i - > nat_cnt [ RECLAIMABLE_NAT ] + + ;
2017-11-11 00:36:51 +03:00
return ne ;
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
static struct nat_entry * __lookup_nat_cache ( struct f2fs_nm_info * nm_i , nid_t n )
{
2018-08-05 18:08:59 +03:00
struct nat_entry * ne ;
ne = radix_tree_lookup ( & nm_i - > nat_root , n ) ;
/* for recent accessed nat entry, move it to tail of lru list */
if ( ne & & ! get_nat_flag ( ne , IS_DIRTY ) ) {
spin_lock ( & nm_i - > nat_list_lock ) ;
if ( ! list_empty ( & ne - > list ) )
list_move_tail ( & ne - > list , & nm_i - > nat_entries ) ;
spin_unlock ( & nm_i - > nat_list_lock ) ;
}
return ne ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
static unsigned int __gang_lookup_nat_cache ( struct f2fs_nm_info * nm_i ,
nid_t start , unsigned int nr , struct nat_entry * * ep )
{
return radix_tree_gang_lookup ( & nm_i - > nat_root , ( void * * ) ep , start , nr ) ;
}
static void __del_from_nat_cache ( struct f2fs_nm_info * nm_i , struct nat_entry * e )
{
radix_tree_delete ( & nm_i - > nat_root , nat_get_nid ( e ) ) ;
2020-11-07 00:22:05 +03:00
nm_i - > nat_cnt [ TOTAL_NAT ] - - ;
nm_i - > nat_cnt [ RECLAIMABLE_NAT ] - - ;
2017-11-11 00:36:51 +03:00
__free_nat_entry ( e ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2018-03-20 18:08:30 +03:00
static struct nat_entry_set * __grab_nat_entry_set ( struct f2fs_nm_info * nm_i ,
struct nat_entry * ne )
2014-09-22 22:40:48 +04:00
{
nid_t set = NAT_BLOCK_OFFSET ( ne - > ni . nid ) ;
struct nat_entry_set * head ;
head = radix_tree_lookup ( & nm_i - > nat_set_root , set ) ;
if ( ! head ) {
2021-08-09 03:24:48 +03:00
head = f2fs_kmem_cache_alloc ( nat_entry_set_slab ,
GFP_NOFS , true , NULL ) ;
2014-09-22 22:40:48 +04:00
INIT_LIST_HEAD ( & head - > entry_list ) ;
INIT_LIST_HEAD ( & head - > set_list ) ;
head - > set = set ;
head - > entry_cnt = 0 ;
2014-12-05 21:39:49 +03:00
f2fs_radix_tree_insert ( & nm_i - > nat_set_root , set , head ) ;
2014-09-22 22:40:48 +04:00
}
2018-03-20 18:08:30 +03:00
return head ;
}
static void __set_nat_cache_dirty ( struct f2fs_nm_info * nm_i ,
struct nat_entry * ne )
{
struct nat_entry_set * head ;
bool new_ne = nat_get_blkaddr ( ne ) = = NEW_ADDR ;
if ( ! new_ne )
head = __grab_nat_entry_set ( nm_i , ne ) ;
/*
* update entry_cnt in below condition :
* 1. update NEW_ADDR to valid block address ;
* 2. update old block address to new one ;
*/
if ( ! new_ne & & ( get_nat_flag ( ne , IS_PREALLOC ) | |
! get_nat_flag ( ne , IS_DIRTY ) ) )
head - > entry_cnt + + ;
set_nat_flag ( ne , IS_PREALLOC , new_ne ) ;
2017-06-05 13:29:08 +03:00
if ( get_nat_flag ( ne , IS_DIRTY ) )
goto refresh_list ;
2020-11-07 00:22:05 +03:00
nm_i - > nat_cnt [ DIRTY_NAT ] + + ;
nm_i - > nat_cnt [ RECLAIMABLE_NAT ] - - ;
2014-09-22 22:40:48 +04:00
set_nat_flag ( ne , IS_DIRTY , true ) ;
2017-06-05 13:29:08 +03:00
refresh_list :
2018-08-05 18:08:59 +03:00
spin_lock ( & nm_i - > nat_list_lock ) ;
2018-03-20 18:08:30 +03:00
if ( new_ne )
2017-06-05 13:29:08 +03:00
list_del_init ( & ne - > list ) ;
else
list_move_tail ( & ne - > list , & head - > entry_list ) ;
2018-08-05 18:08:59 +03:00
spin_unlock ( & nm_i - > nat_list_lock ) ;
2014-09-22 22:40:48 +04:00
}
static void __clear_nat_cache_dirty ( struct f2fs_nm_info * nm_i ,
2017-02-28 16:34:47 +03:00
struct nat_entry_set * set , struct nat_entry * ne )
2014-09-22 22:40:48 +04:00
{
2018-08-05 18:08:59 +03:00
spin_lock ( & nm_i - > nat_list_lock ) ;
2017-02-28 16:34:47 +03:00
list_move_tail ( & ne - > list , & nm_i - > nat_entries ) ;
2018-08-05 18:08:59 +03:00
spin_unlock ( & nm_i - > nat_list_lock ) ;
2017-02-28 16:34:47 +03:00
set_nat_flag ( ne , IS_DIRTY , false ) ;
set - > entry_cnt - - ;
2020-11-07 00:22:05 +03:00
nm_i - > nat_cnt [ DIRTY_NAT ] - - ;
nm_i - > nat_cnt [ RECLAIMABLE_NAT ] + + ;
2014-09-22 22:40:48 +04:00
}
static unsigned int __gang_lookup_nat_set ( struct f2fs_nm_info * nm_i ,
nid_t start , unsigned int nr , struct nat_entry_set * * ep )
{
return radix_tree_gang_lookup ( & nm_i - > nat_set_root , ( void * * ) ep ,
start , nr ) ;
}
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
bool f2fs_in_warm_node_list ( struct f2fs_sb_info * sbi , struct page * page )
{
return NODE_MAPPING ( sbi ) = = page - > mapping & &
IS_DNODE ( page ) & & is_cold_node ( page ) ;
}
void f2fs_init_fsync_node_info ( struct f2fs_sb_info * sbi )
{
spin_lock_init ( & sbi - > fsync_node_lock ) ;
INIT_LIST_HEAD ( & sbi - > fsync_node_list ) ;
sbi - > fsync_seg_id = 0 ;
sbi - > fsync_node_num = 0 ;
}
static unsigned int f2fs_add_fsync_node_entry ( struct f2fs_sb_info * sbi ,
struct page * page )
{
struct fsync_node_entry * fn ;
unsigned long flags ;
unsigned int seq_id ;
2021-08-09 03:24:48 +03:00
fn = f2fs_kmem_cache_alloc ( fsync_node_entry_slab ,
GFP_NOFS , true , NULL ) ;
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
get_page ( page ) ;
fn - > page = page ;
INIT_LIST_HEAD ( & fn - > list ) ;
spin_lock_irqsave ( & sbi - > fsync_node_lock , flags ) ;
list_add_tail ( & fn - > list , & sbi - > fsync_node_list ) ;
fn - > seq_id = sbi - > fsync_seg_id + + ;
seq_id = fn - > seq_id ;
sbi - > fsync_node_num + + ;
spin_unlock_irqrestore ( & sbi - > fsync_node_lock , flags ) ;
return seq_id ;
}
void f2fs_del_fsync_node_entry ( struct f2fs_sb_info * sbi , struct page * page )
{
struct fsync_node_entry * fn ;
unsigned long flags ;
spin_lock_irqsave ( & sbi - > fsync_node_lock , flags ) ;
list_for_each_entry ( fn , & sbi - > fsync_node_list , list ) {
if ( fn - > page = = page ) {
list_del ( & fn - > list ) ;
sbi - > fsync_node_num - - ;
spin_unlock_irqrestore ( & sbi - > fsync_node_lock , flags ) ;
kmem_cache_free ( fsync_node_entry_slab , fn ) ;
put_page ( page ) ;
return ;
}
}
spin_unlock_irqrestore ( & sbi - > fsync_node_lock , flags ) ;
f2fs_bug_on ( sbi , 1 ) ;
}
void f2fs_reset_fsync_node_info ( struct f2fs_sb_info * sbi )
{
unsigned long flags ;
spin_lock_irqsave ( & sbi - > fsync_node_lock , flags ) ;
sbi - > fsync_seg_id = 0 ;
spin_unlock_irqrestore ( & sbi - > fsync_node_lock , flags ) ;
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
int f2fs_need_dentry_mark ( struct f2fs_sb_info * sbi , nid_t nid )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
struct nat_entry * e ;
2015-04-30 04:31:19 +03:00
bool need = false ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2022-01-07 23:48:44 +03:00
f2fs_down_read ( & nm_i - > nat_tree_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
e = __lookup_nat_cache ( nm_i , nid ) ;
2015-04-30 04:31:19 +03:00
if ( e ) {
if ( ! get_nat_flag ( e , IS_CHECKPOINTED ) & &
! get_nat_flag ( e , HAS_FSYNCED_INODE ) )
need = true ;
}
2022-01-07 23:48:44 +03:00
f2fs_up_read ( & nm_i - > nat_tree_lock ) ;
2015-04-30 04:31:19 +03:00
return need ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
bool f2fs_is_checkpointed_node ( struct f2fs_sb_info * sbi , nid_t nid )
2014-03-20 16:52:53 +04:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
struct nat_entry * e ;
2015-04-30 04:31:19 +03:00
bool is_cp = true ;
2014-03-20 16:52:53 +04:00
2022-01-07 23:48:44 +03:00
f2fs_down_read ( & nm_i - > nat_tree_lock ) ;
2015-04-30 04:31:19 +03:00
e = __lookup_nat_cache ( nm_i , nid ) ;
if ( e & & ! get_nat_flag ( e , IS_CHECKPOINTED ) )
is_cp = false ;
2022-01-07 23:48:44 +03:00
f2fs_up_read ( & nm_i - > nat_tree_lock ) ;
2015-04-30 04:31:19 +03:00
return is_cp ;
2014-03-20 16:52:53 +04:00
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
bool f2fs_need_inode_block_update ( struct f2fs_sb_info * sbi , nid_t ino )
2014-06-03 19:39:42 +04:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
struct nat_entry * e ;
f2fs: fix conditions to remain recovery information in f2fs_sync_file
This patch revisited whole the recovery information during the f2fs_sync_file.
In this patch, there are three information to make a decision.
a) IS_CHECKPOINTED, /* is it checkpointed before? */
b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */
c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */
And, the scenarios for our rule are based on:
[Term] F: fsync_mark, D: dentry_mark
1. inode(x) | CP | inode(x) | dnode(F)
2. inode(x) | CP | inode(F) | dnode(F)
3. inode(x) | CP | dnode(F) | inode(x) | inode(F)
4. inode(x) | CP | dnode(F) | inode(F)
5. CP | inode(x) | dnode(F) | inode(DF)
6. CP | inode(DF) | dnode(F)
7. CP | dnode(F) | inode(DF)
8. CP | dnode(F) | inode(x) | inode(DF)
For example, #3, the three conditions should be changed as follows.
inode(x) | CP | dnode(F) | inode(x) | inode(F)
a) x o o o o
b) x x x x o
c) x o o x o
If f2fs_sync_file stops ------^,
it should write inode(F) --------------^
So, the need_inode_block_update should return true, since
c) get_nat_flag(e, HAS_LAST_FSYNC), is false.
For example, #8,
CP | alloc | dnode(F) | inode(x) | inode(DF)
a) o x x x x
b) x x x o
c) o o x o
If f2fs_sync_file stops -------^,
it should write inode(DF) --------------^
Note that, the roll-forward policy should follow this rule, which means,
if there are any missing blocks, we doesn't need to recover that inode.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16 01:50:48 +04:00
bool need_update = true ;
2014-06-03 19:39:42 +04:00
2022-01-07 23:48:44 +03:00
f2fs_down_read ( & nm_i - > nat_tree_lock ) ;
f2fs: fix conditions to remain recovery information in f2fs_sync_file
This patch revisited whole the recovery information during the f2fs_sync_file.
In this patch, there are three information to make a decision.
a) IS_CHECKPOINTED, /* is it checkpointed before? */
b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */
c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */
And, the scenarios for our rule are based on:
[Term] F: fsync_mark, D: dentry_mark
1. inode(x) | CP | inode(x) | dnode(F)
2. inode(x) | CP | inode(F) | dnode(F)
3. inode(x) | CP | dnode(F) | inode(x) | inode(F)
4. inode(x) | CP | dnode(F) | inode(F)
5. CP | inode(x) | dnode(F) | inode(DF)
6. CP | inode(DF) | dnode(F)
7. CP | dnode(F) | inode(DF)
8. CP | dnode(F) | inode(x) | inode(DF)
For example, #3, the three conditions should be changed as follows.
inode(x) | CP | dnode(F) | inode(x) | inode(F)
a) x o o o o
b) x x x x o
c) x o o x o
If f2fs_sync_file stops ------^,
it should write inode(F) --------------^
So, the need_inode_block_update should return true, since
c) get_nat_flag(e, HAS_LAST_FSYNC), is false.
For example, #8,
CP | alloc | dnode(F) | inode(x) | inode(DF)
a) o x x x x
b) x x x o
c) o o x o
If f2fs_sync_file stops -------^,
it should write inode(DF) --------------^
Note that, the roll-forward policy should follow this rule, which means,
if there are any missing blocks, we doesn't need to recover that inode.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16 01:50:48 +04:00
e = __lookup_nat_cache ( nm_i , ino ) ;
if ( e & & get_nat_flag ( e , HAS_LAST_FSYNC ) & &
( get_nat_flag ( e , IS_CHECKPOINTED ) | |
get_nat_flag ( e , HAS_FSYNCED_INODE ) ) )
need_update = false ;
2022-01-07 23:48:44 +03:00
f2fs_up_read ( & nm_i - > nat_tree_lock ) ;
f2fs: fix conditions to remain recovery information in f2fs_sync_file
This patch revisited whole the recovery information during the f2fs_sync_file.
In this patch, there are three information to make a decision.
a) IS_CHECKPOINTED, /* is it checkpointed before? */
b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */
c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */
And, the scenarios for our rule are based on:
[Term] F: fsync_mark, D: dentry_mark
1. inode(x) | CP | inode(x) | dnode(F)
2. inode(x) | CP | inode(F) | dnode(F)
3. inode(x) | CP | dnode(F) | inode(x) | inode(F)
4. inode(x) | CP | dnode(F) | inode(F)
5. CP | inode(x) | dnode(F) | inode(DF)
6. CP | inode(DF) | dnode(F)
7. CP | dnode(F) | inode(DF)
8. CP | dnode(F) | inode(x) | inode(DF)
For example, #3, the three conditions should be changed as follows.
inode(x) | CP | dnode(F) | inode(x) | inode(F)
a) x o o o o
b) x x x x o
c) x o o x o
If f2fs_sync_file stops ------^,
it should write inode(F) --------------^
So, the need_inode_block_update should return true, since
c) get_nat_flag(e, HAS_LAST_FSYNC), is false.
For example, #8,
CP | alloc | dnode(F) | inode(x) | inode(DF)
a) o x x x x
b) x x x o
c) o o x o
If f2fs_sync_file stops -------^,
it should write inode(DF) --------------^
Note that, the roll-forward policy should follow this rule, which means,
if there are any missing blocks, we doesn't need to recover that inode.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16 01:50:48 +04:00
return need_update ;
2014-06-03 19:39:42 +04:00
}
2017-11-11 00:36:51 +03:00
/* must be locked by nat_tree_lock */
2016-02-19 13:12:28 +03:00
static void cache_nat_entry ( struct f2fs_sb_info * sbi , nid_t nid ,
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
struct f2fs_nat_entry * ne )
{
2016-02-19 13:12:28 +03:00
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
2017-11-11 00:36:51 +03:00
struct nat_entry * new , * e ;
2014-12-05 21:39:49 +03:00
2021-12-14 00:28:40 +03:00
/* Let's mitigate lock contention of nat_tree_lock during checkpoint */
2022-01-07 23:48:44 +03:00
if ( f2fs_rwsem_is_locked ( & sbi - > cp_global_sem ) )
2021-12-14 00:28:40 +03:00
return ;
2021-08-09 03:24:48 +03:00
new = __alloc_nat_entry ( sbi , nid , false ) ;
2017-11-11 00:36:51 +03:00
if ( ! new )
return ;
2022-01-07 23:48:44 +03:00
f2fs_down_write ( & nm_i - > nat_tree_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
e = __lookup_nat_cache ( nm_i , nid ) ;
2017-11-11 00:36:51 +03:00
if ( ! e )
e = __init_nat_entry ( nm_i , new , ne , false ) ;
else
2016-10-11 20:36:12 +03:00
f2fs_bug_on ( sbi , nat_get_ino ( e ) ! = le32_to_cpu ( ne - > ino ) | |
nat_get_blkaddr ( e ) ! =
le32_to_cpu ( ne - > block_addr ) | |
2016-02-19 13:12:28 +03:00
nat_get_version ( e ) ! = ne - > version ) ;
2022-01-07 23:48:44 +03:00
f2fs_up_write ( & nm_i - > nat_tree_lock ) ;
2017-11-11 00:36:51 +03:00
if ( e ! = new )
__free_nat_entry ( new ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
static void set_node_addr ( struct f2fs_sb_info * sbi , struct node_info * ni ,
2014-03-20 16:52:53 +04:00
block_t new_blkaddr , bool fsync_done )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
struct nat_entry * e ;
2021-08-09 03:24:48 +03:00
struct nat_entry * new = __alloc_nat_entry ( sbi , ni - > nid , true ) ;
2014-12-05 21:39:49 +03:00
2022-01-07 23:48:44 +03:00
f2fs_down_write ( & nm_i - > nat_tree_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
e = __lookup_nat_cache ( nm_i , ni - > nid ) ;
if ( ! e ) {
2017-11-11 00:36:51 +03:00
e = __init_nat_entry ( nm_i , new , NULL , true ) ;
2014-12-18 12:37:21 +03:00
copy_node_info ( & e - > ni , ni ) ;
2014-09-03 02:52:58 +04:00
f2fs_bug_on ( sbi , ni - > blk_addr = = NEW_ADDR ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
} else if ( new_blkaddr = = NEW_ADDR ) {
/*
* when nid is reallocated ,
* previous nat entry can be remained in nat cache .
* So , reinitialize it with new information .
*/
2014-12-18 12:37:21 +03:00
copy_node_info ( & e - > ni , ni ) ;
2014-09-03 02:52:58 +04:00
f2fs_bug_on ( sbi , ni - > blk_addr ! = NULL_ADDR ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2017-11-11 00:36:51 +03:00
/* let's free early to reduce memory consumption */
if ( e ! = new )
__free_nat_entry ( new ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
/* sanity check */
2014-09-03 02:52:58 +04:00
f2fs_bug_on ( sbi , nat_get_blkaddr ( e ) ! = ni - > blk_addr ) ;
f2fs_bug_on ( sbi , nat_get_blkaddr ( e ) = = NULL_ADDR & &
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
new_blkaddr = = NULL_ADDR ) ;
2014-09-03 02:52:58 +04:00
f2fs_bug_on ( sbi , nat_get_blkaddr ( e ) = = NEW_ADDR & &
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
new_blkaddr = = NEW_ADDR ) ;
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 10:26:32 +03:00
f2fs_bug_on ( sbi , __is_valid_data_blkaddr ( nat_get_blkaddr ( e ) ) & &
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
new_blkaddr = = NEW_ADDR ) ;
2014-08-06 18:22:50 +04:00
/* increment version no as node is removed */
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( nat_get_blkaddr ( e ) ! = NEW_ADDR & & new_blkaddr = = NULL_ADDR ) {
unsigned char version = nat_get_version ( e ) ;
2021-04-06 04:47:35 +03:00
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
nat_set_version ( e , inc_node_version ( version ) ) ;
}
/* change address */
nat_set_blkaddr ( e , new_blkaddr ) ;
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 10:26:32 +03:00
if ( ! __is_valid_data_blkaddr ( new_blkaddr ) )
f2fs: fix conditions to remain recovery information in f2fs_sync_file
This patch revisited whole the recovery information during the f2fs_sync_file.
In this patch, there are three information to make a decision.
a) IS_CHECKPOINTED, /* is it checkpointed before? */
b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */
c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */
And, the scenarios for our rule are based on:
[Term] F: fsync_mark, D: dentry_mark
1. inode(x) | CP | inode(x) | dnode(F)
2. inode(x) | CP | inode(F) | dnode(F)
3. inode(x) | CP | dnode(F) | inode(x) | inode(F)
4. inode(x) | CP | dnode(F) | inode(F)
5. CP | inode(x) | dnode(F) | inode(DF)
6. CP | inode(DF) | dnode(F)
7. CP | dnode(F) | inode(DF)
8. CP | dnode(F) | inode(x) | inode(DF)
For example, #3, the three conditions should be changed as follows.
inode(x) | CP | dnode(F) | inode(x) | inode(F)
a) x o o o o
b) x x x x o
c) x o o x o
If f2fs_sync_file stops ------^,
it should write inode(F) --------------^
So, the need_inode_block_update should return true, since
c) get_nat_flag(e, HAS_LAST_FSYNC), is false.
For example, #8,
CP | alloc | dnode(F) | inode(x) | inode(DF)
a) o x x x x
b) x x x o
c) o o x o
If f2fs_sync_file stops -------^,
it should write inode(DF) --------------^
Note that, the roll-forward policy should follow this rule, which means,
if there are any missing blocks, we doesn't need to recover that inode.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16 01:50:48 +04:00
set_nat_flag ( e , IS_CHECKPOINTED , false ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
__set_nat_cache_dirty ( nm_i , e ) ;
2014-03-20 16:52:53 +04:00
/* update fsync_mark if its inode nat entry is still alive */
2015-04-30 13:35:50 +03:00
if ( ni - > nid ! = ni - > ino )
e = __lookup_nat_cache ( nm_i , ni - > ino ) ;
f2fs: fix conditions to remain recovery information in f2fs_sync_file
This patch revisited whole the recovery information during the f2fs_sync_file.
In this patch, there are three information to make a decision.
a) IS_CHECKPOINTED, /* is it checkpointed before? */
b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */
c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */
And, the scenarios for our rule are based on:
[Term] F: fsync_mark, D: dentry_mark
1. inode(x) | CP | inode(x) | dnode(F)
2. inode(x) | CP | inode(F) | dnode(F)
3. inode(x) | CP | dnode(F) | inode(x) | inode(F)
4. inode(x) | CP | dnode(F) | inode(F)
5. CP | inode(x) | dnode(F) | inode(DF)
6. CP | inode(DF) | dnode(F)
7. CP | dnode(F) | inode(DF)
8. CP | dnode(F) | inode(x) | inode(DF)
For example, #3, the three conditions should be changed as follows.
inode(x) | CP | dnode(F) | inode(x) | inode(F)
a) x o o o o
b) x x x x o
c) x o o x o
If f2fs_sync_file stops ------^,
it should write inode(F) --------------^
So, the need_inode_block_update should return true, since
c) get_nat_flag(e, HAS_LAST_FSYNC), is false.
For example, #8,
CP | alloc | dnode(F) | inode(x) | inode(DF)
a) o x x x x
b) x x x o
c) o o x o
If f2fs_sync_file stops -------^,
it should write inode(DF) --------------^
Note that, the roll-forward policy should follow this rule, which means,
if there are any missing blocks, we doesn't need to recover that inode.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16 01:50:48 +04:00
if ( e ) {
if ( fsync_done & & ni - > nid = = ni - > ino )
set_nat_flag ( e , HAS_FSYNCED_INODE , true ) ;
set_nat_flag ( e , HAS_LAST_FSYNC , fsync_done ) ;
}
2022-01-07 23:48:44 +03:00
f2fs_up_write ( & nm_i - > nat_tree_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
int f2fs_try_to_free_nats ( struct f2fs_sb_info * sbi , int nr_shrink )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
2015-06-20 01:36:07 +03:00
int nr = nr_shrink ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2022-01-07 23:48:44 +03:00
if ( ! f2fs_down_write_trylock ( & nm_i - > nat_tree_lock ) )
2016-08-04 21:38:25 +03:00
return 0 ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2018-08-05 18:08:59 +03:00
spin_lock ( & nm_i - > nat_list_lock ) ;
while ( nr_shrink ) {
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
struct nat_entry * ne ;
2018-08-05 18:08:59 +03:00
if ( list_empty ( & nm_i - > nat_entries ) )
break ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
ne = list_first_entry ( & nm_i - > nat_entries ,
struct nat_entry , list ) ;
2018-08-05 18:08:59 +03:00
list_del ( & ne - > list ) ;
spin_unlock ( & nm_i - > nat_list_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
__del_from_nat_cache ( nm_i , ne ) ;
nr_shrink - - ;
2018-08-05 18:08:59 +03:00
spin_lock ( & nm_i - > nat_list_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2018-08-05 18:08:59 +03:00
spin_unlock ( & nm_i - > nat_list_lock ) ;
2022-01-07 23:48:44 +03:00
f2fs_up_write ( & nm_i - > nat_tree_lock ) ;
2015-06-20 01:36:07 +03:00
return nr - nr_shrink ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2018-07-16 19:02:17 +03:00
int f2fs_get_node_info ( struct f2fs_sb_info * sbi , nid_t nid ,
2021-12-14 01:16:32 +03:00
struct node_info * ni , bool checkpoint_context )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
struct curseg_info * curseg = CURSEG_I ( sbi , CURSEG_HOT_DATA ) ;
f2fs: split journal cache from curseg cache
In curseg cache, f2fs caches two different parts:
- datas of current summay block, i.e. summary entries, footer info.
- journal info, i.e. sparse nat/sit entries or io stat info.
With this approach, 1) it may cause higher lock contention when we access
or update both of the parts of cache since we use the same mutex lock
curseg_mutex to protect the cache. 2) current summary block with last
journal info will be writebacked into device as a normal summary block
when flushing, however, we treat journal info as valid one only in current
summary, so most normal summary blocks contain junk journal data, it wastes
remaining space of summary block.
So, in order to fix above issues, we split curseg cache into two parts:
a) current summary block, protected by original mutex lock curseg_mutex
b) journal cache, protected by newly introduced r/w semaphore journal_rwsem
When loading curseg cache during ->mount, we store summary info and
journal info into different caches; When doing checkpoint, we combine
datas of two cache into current summary block for persisting.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-19 13:08:46 +03:00
struct f2fs_journal * journal = curseg - > journal ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
nid_t start_nid = START_NID ( nid ) ;
struct f2fs_nat_block * nat_blk ;
struct page * page = NULL ;
struct f2fs_nat_entry ne ;
struct nat_entry * e ;
2017-04-22 13:06:26 +03:00
pgoff_t index ;
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 10:26:32 +03:00
block_t blkaddr ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
int i ;
ni - > nid = nid ;
2021-07-22 20:30:58 +03:00
retry :
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
/* Check nat cache */
2022-01-07 23:48:44 +03:00
f2fs_down_read ( & nm_i - > nat_tree_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
e = __lookup_nat_cache ( nm_i , nid ) ;
if ( e ) {
ni - > ino = nat_get_ino ( e ) ;
ni - > blk_addr = nat_get_blkaddr ( e ) ;
ni - > version = nat_get_version ( e ) ;
2022-01-07 23:48:44 +03:00
f2fs_up_read ( & nm_i - > nat_tree_lock ) ;
2018-07-16 19:02:17 +03:00
return 0 ;
2016-02-19 13:12:28 +03:00
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2021-07-22 20:30:58 +03:00
/*
* Check current segment summary by trying to grab journal_rwsem first .
* This sem is on the critical path on the checkpoint requiring the above
* nat_tree_lock . Therefore , we should retry , if we failed to grab here
* while not bothering checkpoint .
*/
2022-01-07 23:48:44 +03:00
if ( ! f2fs_rwsem_is_locked ( & sbi - > cp_global_sem ) | | checkpoint_context ) {
2021-07-22 20:30:58 +03:00
down_read ( & curseg - > journal_rwsem ) ;
2022-01-07 23:48:44 +03:00
} else if ( f2fs_rwsem_is_contended ( & nm_i - > nat_tree_lock ) | |
2021-12-14 01:16:32 +03:00
! down_read_trylock ( & curseg - > journal_rwsem ) ) {
2022-01-07 23:48:44 +03:00
f2fs_up_read ( & nm_i - > nat_tree_lock ) ;
2021-07-22 20:30:58 +03:00
goto retry ;
}
2014-12-31 10:08:26 +03:00
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
i = f2fs_lookup_journal_in_cursum ( journal , NAT_JOURNAL , nid , 0 ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( i > = 0 ) {
2016-02-14 13:50:40 +03:00
ne = nat_in_journal ( journal , i ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
node_info_from_raw_nat ( ni , & ne ) ;
}
2022-09-14 04:33:22 +03:00
up_read ( & curseg - > journal_rwsem ) ;
2017-04-22 13:06:26 +03:00
if ( i > = 0 ) {
2022-01-07 23:48:44 +03:00
f2fs_up_read ( & nm_i - > nat_tree_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
goto cache ;
2017-04-22 13:06:26 +03:00
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
/* Fill node_info from nat page */
2017-04-22 13:06:26 +03:00
index = current_nat_addr ( sbi , nid ) ;
2022-01-07 23:48:44 +03:00
f2fs_up_read ( & nm_i - > nat_tree_lock ) ;
2017-04-22 13:06:26 +03:00
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
page = f2fs_get_meta_page ( sbi , index ) ;
2018-07-16 19:02:17 +03:00
if ( IS_ERR ( page ) )
return PTR_ERR ( page ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
nat_blk = ( struct f2fs_nat_block * ) page_address ( page ) ;
ne = nat_blk - > entries [ nid - start_nid ] ;
node_info_from_raw_nat ( ni , & ne ) ;
f2fs_put_page ( page , 1 ) ;
cache :
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 10:26:32 +03:00
blkaddr = le32_to_cpu ( ne . block_addr ) ;
if ( __is_valid_data_blkaddr ( blkaddr ) & &
! f2fs_is_valid_blkaddr ( sbi , blkaddr , DATA_GENERIC_ENHANCE ) )
return - EFAULT ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
/* cache nat entry */
2016-02-19 13:12:28 +03:00
cache_nat_entry ( sbi , nid , & ne ) ;
2018-07-16 19:02:17 +03:00
return 0 ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2016-05-07 02:19:43 +03:00
/*
* readahead MAX_RA_NODE number of node pages .
*/
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
static void f2fs_ra_node_pages ( struct page * parent , int start , int n )
2016-05-07 02:19:43 +03:00
{
struct f2fs_sb_info * sbi = F2FS_P_SB ( parent ) ;
struct blk_plug plug ;
int i , end ;
nid_t nid ;
blk_start_plug ( & plug ) ;
/* Then, try readahead for siblings of the desired node */
end = start + n ;
end = min ( end , NIDS_PER_BLOCK ) ;
for ( i = start ; i < end ; i + + ) {
nid = get_nid ( parent , i , false ) ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_ra_node_page ( sbi , nid ) ;
2016-05-07 02:19:43 +03:00
}
blk_finish_plug ( & plug ) ;
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
pgoff_t f2fs_get_next_page_offset ( struct dnode_of_data * dn , pgoff_t pgofs )
2016-01-26 10:40:44 +03:00
{
const long direct_index = ADDRS_PER_INODE ( dn - > inode ) ;
2019-03-25 16:08:19 +03:00
const long direct_blks = ADDRS_PER_BLOCK ( dn - > inode ) ;
const long indirect_blks = ADDRS_PER_BLOCK ( dn - > inode ) * NIDS_PER_BLOCK ;
unsigned int skipped_unit = ADDRS_PER_BLOCK ( dn - > inode ) ;
2016-01-26 10:40:44 +03:00
int cur_level = dn - > cur_level ;
int max_level = dn - > max_level ;
pgoff_t base = 0 ;
if ( ! dn - > max_level )
return pgofs + 1 ;
while ( max_level - - > cur_level )
skipped_unit * = NIDS_PER_BLOCK ;
switch ( dn - > max_level ) {
case 3 :
base + = 2 * indirect_blks ;
2020-08-24 01:36:59 +03:00
fallthrough ;
2016-01-26 10:40:44 +03:00
case 2 :
base + = 2 * direct_blks ;
2020-08-24 01:36:59 +03:00
fallthrough ;
2016-01-26 10:40:44 +03:00
case 1 :
base + = direct_index ;
break ;
default :
f2fs_bug_on ( F2FS_I_SB ( dn - > inode ) , 1 ) ;
}
return ( ( pgofs - base ) / skipped_unit + 1 ) * skipped_unit + base ;
}
2012-11-29 08:28:09 +04:00
/*
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
* The maximum depth is four .
* Offset [ 0 ] will have raw inode offset .
*/
2016-01-26 10:39:35 +03:00
static int get_node_path ( struct inode * inode , long block ,
2013-08-12 16:08:03 +04:00
int offset [ 4 ] , unsigned int noffset [ 4 ] )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
2016-01-26 10:39:35 +03:00
const long direct_index = ADDRS_PER_INODE ( inode ) ;
2019-03-25 16:08:19 +03:00
const long direct_blks = ADDRS_PER_BLOCK ( inode ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
const long dptrs_per_blk = NIDS_PER_BLOCK ;
2019-03-25 16:08:19 +03:00
const long indirect_blks = ADDRS_PER_BLOCK ( inode ) * NIDS_PER_BLOCK ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
const long dindirect_blks = indirect_blks * NIDS_PER_BLOCK ;
int n = 0 ;
int level = 0 ;
noffset [ 0 ] = 0 ;
if ( block < direct_index ) {
2013-03-02 07:41:31 +04:00
offset [ n ] = block ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
goto got ;
}
block - = direct_index ;
if ( block < direct_blks ) {
offset [ n + + ] = NODE_DIR1_BLOCK ;
noffset [ n ] = 1 ;
2013-03-02 07:41:31 +04:00
offset [ n ] = block ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
level = 1 ;
goto got ;
}
block - = direct_blks ;
if ( block < direct_blks ) {
offset [ n + + ] = NODE_DIR2_BLOCK ;
noffset [ n ] = 2 ;
2013-03-02 07:41:31 +04:00
offset [ n ] = block ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
level = 1 ;
goto got ;
}
block - = direct_blks ;
if ( block < indirect_blks ) {
offset [ n + + ] = NODE_IND1_BLOCK ;
noffset [ n ] = 3 ;
offset [ n + + ] = block / direct_blks ;
noffset [ n ] = 4 + offset [ n - 1 ] ;
2013-03-02 07:41:31 +04:00
offset [ n ] = block % direct_blks ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
level = 2 ;
goto got ;
}
block - = indirect_blks ;
if ( block < indirect_blks ) {
offset [ n + + ] = NODE_IND2_BLOCK ;
noffset [ n ] = 4 + dptrs_per_blk ;
offset [ n + + ] = block / direct_blks ;
noffset [ n ] = 5 + dptrs_per_blk + offset [ n - 1 ] ;
2013-03-02 07:41:31 +04:00
offset [ n ] = block % direct_blks ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
level = 2 ;
goto got ;
}
block - = indirect_blks ;
if ( block < dindirect_blks ) {
offset [ n + + ] = NODE_DIND_BLOCK ;
noffset [ n ] = 5 + ( dptrs_per_blk * 2 ) ;
offset [ n + + ] = block / indirect_blks ;
noffset [ n ] = 6 + ( dptrs_per_blk * 2 ) +
offset [ n - 1 ] * ( dptrs_per_blk + 1 ) ;
offset [ n + + ] = ( block / direct_blks ) % dptrs_per_blk ;
noffset [ n ] = 7 + ( dptrs_per_blk * 2 ) +
offset [ n - 2 ] * ( dptrs_per_blk + 1 ) +
offset [ n - 1 ] ;
2013-03-02 07:41:31 +04:00
offset [ n ] = block % direct_blks ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
level = 3 ;
goto got ;
} else {
2017-08-21 23:51:32 +03:00
return - E2BIG ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
got :
return level ;
}
/*
* Caller should call f2fs_put_dnode ( dn ) .
2013-12-21 14:02:14 +04:00
* Also , it should grab and release a rwsem by calling f2fs_lock_op ( ) and
2020-02-27 14:30:05 +03:00
* f2fs_unlock_op ( ) only if mode is set with ALLOC_NODE .
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
*/
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
int f2fs_get_dnode_of_data ( struct dnode_of_data * dn , pgoff_t index , int mode )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
2014-09-03 02:31:18 +04:00
struct f2fs_sb_info * sbi = F2FS_I_SB ( dn - > inode ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
struct page * npage [ 4 ] ;
2015-02-11 22:25:11 +03:00
struct page * parent = NULL ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
int offset [ 4 ] ;
unsigned int noffset [ 4 ] ;
nid_t nids [ 4 ] ;
2016-01-26 10:40:44 +03:00
int level , i = 0 ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
int err = 0 ;
2016-01-26 10:39:35 +03:00
level = get_node_path ( dn - > inode , index , offset , noffset ) ;
2017-08-21 23:51:32 +03:00
if ( level < 0 )
return level ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
nids [ 0 ] = dn - > inode - > i_ino ;
2013-05-20 04:42:28 +04:00
npage [ 0 ] = dn - > inode_page ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2013-05-20 04:42:28 +04:00
if ( ! npage [ 0 ] ) {
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
npage [ 0 ] = f2fs_get_node_page ( sbi , nids [ 0 ] ) ;
2013-05-20 04:42:28 +04:00
if ( IS_ERR ( npage [ 0 ] ) )
return PTR_ERR ( npage [ 0 ] ) ;
}
2015-02-11 22:25:11 +03:00
/* if inline_data is set, should not report any block indices */
if ( f2fs_has_inline_data ( dn - > inode ) & & index ) {
2015-03-03 03:28:16 +03:00
err = - ENOENT ;
2015-02-11 22:25:11 +03:00
f2fs_put_page ( npage [ 0 ] , 1 ) ;
goto release_out ;
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
parent = npage [ 0 ] ;
2013-02-20 02:47:06 +04:00
if ( level ! = 0 )
nids [ 1 ] = get_nid ( parent , offset [ 0 ] , true ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
dn - > inode_page = npage [ 0 ] ;
dn - > inode_page_locked = true ;
/* get indirect or direct nodes */
for ( i = 1 ; i < = level ; i + + ) {
bool done = false ;
2013-02-26 08:10:46 +04:00
if ( ! nids [ i ] & & mode = = ALLOC_NODE ) {
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
/* alloc new node */
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
if ( ! f2fs_alloc_nid ( sbi , & ( nids [ i ] ) ) ) {
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
err = - ENOSPC ;
goto release_pages ;
}
dn - > nid = nids [ i ] ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
npage [ i ] = f2fs_new_node_page ( dn , noffset [ i ] ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( IS_ERR ( npage [ i ] ) ) {
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_alloc_nid_failed ( sbi , nids [ i ] ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
err = PTR_ERR ( npage [ i ] ) ;
goto release_pages ;
}
set_nid ( parent , offset [ i - 1 ] , nids [ i ] , i = = 1 ) ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_alloc_nid_done ( sbi , nids [ i ] ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
done = true ;
2013-02-26 08:10:46 +04:00
} else if ( mode = = LOOKUP_NODE_RA & & i = = level & & level > 1 ) {
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
npage [ i ] = f2fs_get_node_page_ra ( parent , offset [ i - 1 ] ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( IS_ERR ( npage [ i ] ) ) {
err = PTR_ERR ( npage [ i ] ) ;
goto release_pages ;
}
done = true ;
}
if ( i = = 1 ) {
dn - > inode_page_locked = false ;
unlock_page ( parent ) ;
} else {
f2fs_put_page ( parent , 1 ) ;
}
if ( ! done ) {
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
npage [ i ] = f2fs_get_node_page ( sbi , nids [ i ] ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( IS_ERR ( npage [ i ] ) ) {
err = PTR_ERR ( npage [ i ] ) ;
f2fs_put_page ( npage [ 0 ] , 0 ) ;
goto release_out ;
}
}
if ( i < level ) {
parent = npage [ i ] ;
nids [ i + 1 ] = get_nid ( parent , offset [ i ] , false ) ;
}
}
dn - > nid = nids [ level ] ;
dn - > ofs_in_node = offset [ level ] ;
dn - > node_page = npage [ level ] ;
2020-02-14 12:44:10 +03:00
dn - > data_blkaddr = f2fs_data_blkaddr ( dn ) ;
2021-08-04 05:23:48 +03:00
if ( is_inode_flag_set ( dn - > inode , FI_COMPRESSED_FILE ) & &
f2fs_sb_has_readonly ( sbi ) ) {
unsigned int c_len = f2fs_cluster_blocks_are_contiguous ( dn ) ;
block_t blkaddr ;
if ( ! c_len )
goto out ;
blkaddr = f2fs_data_blkaddr ( dn ) ;
if ( blkaddr = = COMPRESS_ADDR )
blkaddr = data_blkaddr ( dn - > inode , dn - > node_page ,
dn - > ofs_in_node + 1 ) ;
2022-11-30 20:26:29 +03:00
f2fs_update_read_extent_tree_range_compressed ( dn - > inode ,
2021-08-04 05:23:48 +03:00
index , blkaddr ,
F2FS_I ( dn - > inode ) - > i_cluster_size ,
c_len ) ;
}
out :
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
return 0 ;
release_pages :
f2fs_put_page ( parent , 1 ) ;
if ( i > 1 )
f2fs_put_page ( npage [ 0 ] , 0 ) ;
release_out :
dn - > inode_page = NULL ;
dn - > node_page = NULL ;
2016-01-26 10:40:44 +03:00
if ( err = = - ENOENT ) {
dn - > cur_level = i ;
dn - > max_level = level ;
2016-07-09 03:42:21 +03:00
dn - > ofs_in_node = offset [ level ] ;
2016-01-26 10:40:44 +03:00
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
return err ;
}
2018-07-16 19:02:17 +03:00
static int truncate_node ( struct dnode_of_data * dn )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
2014-09-03 02:31:18 +04:00
struct f2fs_sb_info * sbi = F2FS_I_SB ( dn - > inode ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
struct node_info ni ;
2018-07-16 19:02:17 +03:00
int err ;
2018-11-22 13:58:46 +03:00
pgoff_t index ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2021-12-14 01:16:32 +03:00
err = f2fs_get_node_info ( sbi , dn - > nid , & ni , false ) ;
2018-07-16 19:02:17 +03:00
if ( err )
return err ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
/* Deallocate node address */
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_invalidate_blocks ( sbi , ni . blk_addr ) ;
f2fs: don't count inode block in in-memory inode.i_blocks
Previously, we count all inode consumed blocks including inode block,
xattr block, index block, data block into i_blocks, for other generic
filesystems, they won't count inode block into i_blocks, so for
userspace applications or quota system, they may detect incorrect block
count according to i_blocks value in inode.
This patch changes to count all blocks into inode.i_blocks excluding
inode block, for on-disk i_blocks, we keep counting inode block for
backward compatibility.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-05 20:11:31 +03:00
dec_valid_node_count ( sbi , dn - > inode , dn - > nid = = dn - > inode - > i_ino ) ;
2014-03-20 16:52:53 +04:00
set_node_addr ( sbi , & ni , NULL_ADDR , false ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( dn - > nid = = dn - > inode - > i_ino ) {
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_remove_orphan_inode ( sbi , dn - > nid ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
dec_valid_inode_count ( sbi ) ;
2016-05-20 21:10:10 +03:00
f2fs_inode_synced ( dn - > inode ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: don't count inode block in in-memory inode.i_blocks
Previously, we count all inode consumed blocks including inode block,
xattr block, index block, data block into i_blocks, for other generic
filesystems, they won't count inode block into i_blocks, so for
userspace applications or quota system, they may detect incorrect block
count according to i_blocks value in inode.
This patch changes to count all blocks into inode.i_blocks excluding
inode block, for on-disk i_blocks, we keep counting inode block for
backward compatibility.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-05 20:11:31 +03:00
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
clear_node_page_dirty ( dn - > node_page ) ;
2015-01-28 12:48:42 +03:00
set_sbi_flag ( sbi , SBI_IS_DIRTY ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2018-11-22 13:58:46 +03:00
index = dn - > node_page - > index ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
f2fs_put_page ( dn - > node_page , 1 ) ;
2014-01-22 15:41:57 +04:00
invalidate_mapping_pages ( NODE_MAPPING ( sbi ) ,
2018-11-22 13:58:46 +03:00
index , index ) ;
2014-01-22 15:41:57 +04:00
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
dn - > node_page = NULL ;
2013-04-19 20:28:52 +04:00
trace_f2fs_truncate_node ( dn - > inode , dn - > nid , ni . blk_addr ) ;
2018-07-16 19:02:17 +03:00
return 0 ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
static int truncate_dnode ( struct dnode_of_data * dn )
{
struct page * page ;
2018-07-16 19:02:17 +03:00
int err ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( dn - > nid = = 0 )
return 1 ;
/* get direct node */
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
page = f2fs_get_node_page ( F2FS_I_SB ( dn - > inode ) , dn - > nid ) ;
2020-02-04 04:37:45 +03:00
if ( PTR_ERR ( page ) = = - ENOENT )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
return 1 ;
else if ( IS_ERR ( page ) )
return PTR_ERR ( page ) ;
/* Make dnode_of_data for parameter */
dn - > node_page = page ;
dn - > ofs_in_node = 0 ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_truncate_data_blocks ( dn ) ;
2018-07-16 19:02:17 +03:00
err = truncate_node ( dn ) ;
if ( err )
return err ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
return 1 ;
}
static int truncate_nodes ( struct dnode_of_data * dn , unsigned int nofs ,
int ofs , int depth )
{
struct dnode_of_data rdn = * dn ;
struct page * page ;
struct f2fs_node * rn ;
nid_t child_nid ;
unsigned int child_nofs ;
int freed = 0 ;
int i , ret ;
if ( dn - > nid = = 0 )
return NIDS_PER_BLOCK + 1 ;
2013-04-19 20:28:52 +04:00
trace_f2fs_truncate_nodes_enter ( dn - > inode , dn - > nid , dn - > data_blkaddr ) ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
page = f2fs_get_node_page ( F2FS_I_SB ( dn - > inode ) , dn - > nid ) ;
2013-04-19 20:28:52 +04:00
if ( IS_ERR ( page ) ) {
trace_f2fs_truncate_nodes_exit ( dn - > inode , PTR_ERR ( page ) ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
return PTR_ERR ( page ) ;
2013-04-19 20:28:52 +04:00
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_ra_node_pages ( page , ofs , NIDS_PER_BLOCK ) ;
2016-05-07 02:19:43 +03:00
2013-07-15 13:57:38 +04:00
rn = F2FS_NODE ( page ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( depth < 3 ) {
for ( i = ofs ; i < NIDS_PER_BLOCK ; i + + , freed + + ) {
child_nid = le32_to_cpu ( rn - > in . nid [ i ] ) ;
if ( child_nid = = 0 )
continue ;
rdn . nid = child_nid ;
ret = truncate_dnode ( & rdn ) ;
if ( ret < 0 )
goto out_err ;
2016-01-08 00:23:12 +03:00
if ( set_nid ( page , i , 0 , false ) )
dn - > node_changed = true ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
} else {
child_nofs = nofs + ofs * ( NIDS_PER_BLOCK + 1 ) + 1 ;
for ( i = ofs ; i < NIDS_PER_BLOCK ; i + + ) {
child_nid = le32_to_cpu ( rn - > in . nid [ i ] ) ;
if ( child_nid = = 0 ) {
child_nofs + = NIDS_PER_BLOCK + 1 ;
continue ;
}
rdn . nid = child_nid ;
ret = truncate_nodes ( & rdn , child_nofs , 0 , depth - 1 ) ;
if ( ret = = ( NIDS_PER_BLOCK + 1 ) ) {
2016-01-08 00:23:12 +03:00
if ( set_nid ( page , i , 0 , false ) )
dn - > node_changed = true ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
child_nofs + = ret ;
} else if ( ret < 0 & & ret ! = - ENOENT ) {
goto out_err ;
}
}
freed = child_nofs ;
}
if ( ! ofs ) {
/* remove current indirect node */
dn - > node_page = page ;
2018-07-16 19:02:17 +03:00
ret = truncate_node ( dn ) ;
if ( ret )
goto out_err ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
freed + + ;
} else {
f2fs_put_page ( page , 1 ) ;
}
2013-04-19 20:28:52 +04:00
trace_f2fs_truncate_nodes_exit ( dn - > inode , freed ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
return freed ;
out_err :
f2fs_put_page ( page , 1 ) ;
2013-04-19 20:28:52 +04:00
trace_f2fs_truncate_nodes_exit ( dn - > inode , ret ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
return ret ;
}
static int truncate_partial_nodes ( struct dnode_of_data * dn ,
struct f2fs_inode * ri , int * offset , int depth )
{
struct page * pages [ 2 ] ;
nid_t nid [ 3 ] ;
nid_t child_nid ;
int err = 0 ;
int i ;
int idx = depth - 2 ;
nid [ 0 ] = le32_to_cpu ( ri - > i_nid [ offset [ 0 ] - NODE_DIR1_BLOCK ] ) ;
if ( ! nid [ 0 ] )
return 0 ;
/* get indirect nodes in the path */
f2fs: fix truncate_partial_nodes bug
The truncate_partial_nodes puts pages incorrectly in the following two cases.
Note that the value for argc 'depth' can only be 2 or 3.
Please see truncate_inode_blocks() and truncate_partial_nodes().
1) An err is occurred in the first 'for' loop
When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't
need to be put. There is no problem, however, when depth is 3, it doesn't put
the pages correctly where pages[0] is valid and pages[1] is invalid.
In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then
'goto fail'.
In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition
because i = -1, so pages[0] cann't be put.
2) An err happened in the second 'for' loop
Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1]
with depth = 3. When an err is detected, we need 'goto fail' to put such
the pages.
When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't
meet the condition because i = -1, so pages[0] cann't be put.
When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can
only put pages[0], pages[1] also cann't be put.
Note that 'depth' has been changed before first 'goto fail' (ref to statemnt
depth = i + 1), so passing this modified 'depth' to the tracepoint,
trace_f2fs_truncate_partial_nodes, is also incorrect.
Signed-off-by: Shifei Ge <shifei10.ge@samsung.com>
[Jaegeuk Kim: modify the description and fix one bug]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-29 11:32:34 +04:00
for ( i = 0 ; i < idx + 1 ; i + + ) {
2014-08-06 18:22:50 +04:00
/* reference count'll be increased */
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
pages [ i ] = f2fs_get_node_page ( F2FS_I_SB ( dn - > inode ) , nid [ i ] ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( IS_ERR ( pages [ i ] ) ) {
err = PTR_ERR ( pages [ i ] ) ;
f2fs: fix truncate_partial_nodes bug
The truncate_partial_nodes puts pages incorrectly in the following two cases.
Note that the value for argc 'depth' can only be 2 or 3.
Please see truncate_inode_blocks() and truncate_partial_nodes().
1) An err is occurred in the first 'for' loop
When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't
need to be put. There is no problem, however, when depth is 3, it doesn't put
the pages correctly where pages[0] is valid and pages[1] is invalid.
In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then
'goto fail'.
In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition
because i = -1, so pages[0] cann't be put.
2) An err happened in the second 'for' loop
Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1]
with depth = 3. When an err is detected, we need 'goto fail' to put such
the pages.
When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't
meet the condition because i = -1, so pages[0] cann't be put.
When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can
only put pages[0], pages[1] also cann't be put.
Note that 'depth' has been changed before first 'goto fail' (ref to statemnt
depth = i + 1), so passing this modified 'depth' to the tracepoint,
trace_f2fs_truncate_partial_nodes, is also incorrect.
Signed-off-by: Shifei Ge <shifei10.ge@samsung.com>
[Jaegeuk Kim: modify the description and fix one bug]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-29 11:32:34 +04:00
idx = i - 1 ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
goto fail ;
}
nid [ i + 1 ] = get_nid ( pages [ i ] , offset [ i + 1 ] , false ) ;
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_ra_node_pages ( pages [ idx ] , offset [ idx + 1 ] , NIDS_PER_BLOCK ) ;
2016-05-07 02:19:43 +03:00
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
/* free direct nodes linked to a partial indirect node */
f2fs: fix truncate_partial_nodes bug
The truncate_partial_nodes puts pages incorrectly in the following two cases.
Note that the value for argc 'depth' can only be 2 or 3.
Please see truncate_inode_blocks() and truncate_partial_nodes().
1) An err is occurred in the first 'for' loop
When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't
need to be put. There is no problem, however, when depth is 3, it doesn't put
the pages correctly where pages[0] is valid and pages[1] is invalid.
In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then
'goto fail'.
In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition
because i = -1, so pages[0] cann't be put.
2) An err happened in the second 'for' loop
Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1]
with depth = 3. When an err is detected, we need 'goto fail' to put such
the pages.
When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't
meet the condition because i = -1, so pages[0] cann't be put.
When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can
only put pages[0], pages[1] also cann't be put.
Note that 'depth' has been changed before first 'goto fail' (ref to statemnt
depth = i + 1), so passing this modified 'depth' to the tracepoint,
trace_f2fs_truncate_partial_nodes, is also incorrect.
Signed-off-by: Shifei Ge <shifei10.ge@samsung.com>
[Jaegeuk Kim: modify the description and fix one bug]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-29 11:32:34 +04:00
for ( i = offset [ idx + 1 ] ; i < NIDS_PER_BLOCK ; i + + ) {
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
child_nid = get_nid ( pages [ idx ] , i , false ) ;
if ( ! child_nid )
continue ;
dn - > nid = child_nid ;
err = truncate_dnode ( dn ) ;
if ( err < 0 )
goto fail ;
2016-01-08 00:23:12 +03:00
if ( set_nid ( pages [ idx ] , i , 0 , false ) )
dn - > node_changed = true ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: fix truncate_partial_nodes bug
The truncate_partial_nodes puts pages incorrectly in the following two cases.
Note that the value for argc 'depth' can only be 2 or 3.
Please see truncate_inode_blocks() and truncate_partial_nodes().
1) An err is occurred in the first 'for' loop
When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't
need to be put. There is no problem, however, when depth is 3, it doesn't put
the pages correctly where pages[0] is valid and pages[1] is invalid.
In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then
'goto fail'.
In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition
because i = -1, so pages[0] cann't be put.
2) An err happened in the second 'for' loop
Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1]
with depth = 3. When an err is detected, we need 'goto fail' to put such
the pages.
When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't
meet the condition because i = -1, so pages[0] cann't be put.
When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can
only put pages[0], pages[1] also cann't be put.
Note that 'depth' has been changed before first 'goto fail' (ref to statemnt
depth = i + 1), so passing this modified 'depth' to the tracepoint,
trace_f2fs_truncate_partial_nodes, is also incorrect.
Signed-off-by: Shifei Ge <shifei10.ge@samsung.com>
[Jaegeuk Kim: modify the description and fix one bug]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-29 11:32:34 +04:00
if ( offset [ idx + 1 ] = = 0 ) {
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
dn - > node_page = pages [ idx ] ;
dn - > nid = nid [ idx ] ;
2018-07-16 19:02:17 +03:00
err = truncate_node ( dn ) ;
if ( err )
goto fail ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
} else {
f2fs_put_page ( pages [ idx ] , 1 ) ;
}
offset [ idx ] + + ;
f2fs: fix truncate_partial_nodes bug
The truncate_partial_nodes puts pages incorrectly in the following two cases.
Note that the value for argc 'depth' can only be 2 or 3.
Please see truncate_inode_blocks() and truncate_partial_nodes().
1) An err is occurred in the first 'for' loop
When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't
need to be put. There is no problem, however, when depth is 3, it doesn't put
the pages correctly where pages[0] is valid and pages[1] is invalid.
In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then
'goto fail'.
In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition
because i = -1, so pages[0] cann't be put.
2) An err happened in the second 'for' loop
Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1]
with depth = 3. When an err is detected, we need 'goto fail' to put such
the pages.
When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't
meet the condition because i = -1, so pages[0] cann't be put.
When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can
only put pages[0], pages[1] also cann't be put.
Note that 'depth' has been changed before first 'goto fail' (ref to statemnt
depth = i + 1), so passing this modified 'depth' to the tracepoint,
trace_f2fs_truncate_partial_nodes, is also incorrect.
Signed-off-by: Shifei Ge <shifei10.ge@samsung.com>
[Jaegeuk Kim: modify the description and fix one bug]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-29 11:32:34 +04:00
offset [ idx + 1 ] = 0 ;
idx - - ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
fail :
f2fs: fix truncate_partial_nodes bug
The truncate_partial_nodes puts pages incorrectly in the following two cases.
Note that the value for argc 'depth' can only be 2 or 3.
Please see truncate_inode_blocks() and truncate_partial_nodes().
1) An err is occurred in the first 'for' loop
When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't
need to be put. There is no problem, however, when depth is 3, it doesn't put
the pages correctly where pages[0] is valid and pages[1] is invalid.
In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then
'goto fail'.
In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition
because i = -1, so pages[0] cann't be put.
2) An err happened in the second 'for' loop
Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1]
with depth = 3. When an err is detected, we need 'goto fail' to put such
the pages.
When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't
meet the condition because i = -1, so pages[0] cann't be put.
When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can
only put pages[0], pages[1] also cann't be put.
Note that 'depth' has been changed before first 'goto fail' (ref to statemnt
depth = i + 1), so passing this modified 'depth' to the tracepoint,
trace_f2fs_truncate_partial_nodes, is also incorrect.
Signed-off-by: Shifei Ge <shifei10.ge@samsung.com>
[Jaegeuk Kim: modify the description and fix one bug]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-29 11:32:34 +04:00
for ( i = idx ; i > = 0 ; i - - )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
f2fs_put_page ( pages [ i ] , 1 ) ;
2013-04-19 20:28:52 +04:00
trace_f2fs_truncate_partial_nodes ( dn - > inode , nid , depth , err ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
return err ;
}
2012-11-29 08:28:09 +04:00
/*
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
* All the block addresses of data and nodes should be nullified .
*/
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
int f2fs_truncate_inode_blocks ( struct inode * inode , pgoff_t from )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
2014-09-03 02:31:18 +04:00
struct f2fs_sb_info * sbi = F2FS_I_SB ( inode ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
int err = 0 , cont = 1 ;
int level , offset [ 4 ] , noffset [ 4 ] ;
2013-02-12 02:28:55 +04:00
unsigned int nofs = 0 ;
2013-12-26 11:30:41 +04:00
struct f2fs_inode * ri ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
struct dnode_of_data dn ;
struct page * page ;
2013-04-19 20:28:52 +04:00
trace_f2fs_truncate_inode_blocks_enter ( inode , from ) ;
2016-01-26 10:39:35 +03:00
level = get_node_path ( inode , from , offset , noffset ) ;
2020-06-20 11:39:43 +03:00
if ( level < 0 ) {
trace_f2fs_truncate_inode_blocks_exit ( inode , level ) ;
2017-08-21 23:51:32 +03:00
return level ;
2020-06-20 11:39:43 +03:00
}
2016-03-30 02:13:45 +03:00
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
page = f2fs_get_node_page ( sbi , inode - > i_ino ) ;
2013-04-19 20:28:52 +04:00
if ( IS_ERR ( page ) ) {
trace_f2fs_truncate_inode_blocks_exit ( inode , PTR_ERR ( page ) ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
return PTR_ERR ( page ) ;
2013-04-19 20:28:52 +04:00
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
set_new_dnode ( & dn , inode , page , NULL , 0 ) ;
unlock_page ( page ) ;
2013-12-26 11:30:41 +04:00
ri = F2FS_INODE ( page ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
switch ( level ) {
case 0 :
case 1 :
nofs = noffset [ 1 ] ;
break ;
case 2 :
nofs = noffset [ 1 ] ;
if ( ! offset [ level - 1 ] )
goto skip_partial ;
2013-12-26 11:30:41 +04:00
err = truncate_partial_nodes ( & dn , ri , offset , level ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( err < 0 & & err ! = - ENOENT )
goto fail ;
nofs + = 1 + NIDS_PER_BLOCK ;
break ;
case 3 :
nofs = 5 + 2 * NIDS_PER_BLOCK ;
if ( ! offset [ level - 1 ] )
goto skip_partial ;
2013-12-26 11:30:41 +04:00
err = truncate_partial_nodes ( & dn , ri , offset , level ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( err < 0 & & err ! = - ENOENT )
goto fail ;
break ;
default :
BUG ( ) ;
}
skip_partial :
while ( cont ) {
2013-12-26 11:30:41 +04:00
dn . nid = le32_to_cpu ( ri - > i_nid [ offset [ 0 ] - NODE_DIR1_BLOCK ] ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
switch ( offset [ 0 ] ) {
case NODE_DIR1_BLOCK :
case NODE_DIR2_BLOCK :
err = truncate_dnode ( & dn ) ;
break ;
case NODE_IND1_BLOCK :
case NODE_IND2_BLOCK :
err = truncate_nodes ( & dn , nofs , offset [ 1 ] , 2 ) ;
break ;
case NODE_DIND_BLOCK :
err = truncate_nodes ( & dn , nofs , offset [ 1 ] , 3 ) ;
cont = 0 ;
break ;
default :
BUG ( ) ;
}
if ( err < 0 & & err ! = - ENOENT )
goto fail ;
if ( offset [ 1 ] = = 0 & &
2013-12-26 11:30:41 +04:00
ri - > i_nid [ offset [ 0 ] - NODE_DIR1_BLOCK ] ) {
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
lock_page ( page ) ;
2016-03-30 02:13:45 +03:00
BUG_ON ( page - > mapping ! = NODE_MAPPING ( sbi ) ) ;
2018-12-25 12:43:42 +03:00
f2fs_wait_on_page_writeback ( page , NODE , true , true ) ;
2013-12-26 11:30:41 +04:00
ri - > i_nid [ offset [ 0 ] - NODE_DIR1_BLOCK ] = 0 ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
set_page_dirty ( page ) ;
unlock_page ( page ) ;
}
offset [ 1 ] = 0 ;
offset [ 0 ] + + ;
nofs + = err ;
}
fail :
f2fs_put_page ( page , 0 ) ;
2013-04-19 20:28:52 +04:00
trace_f2fs_truncate_inode_blocks_exit ( inode , err ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
return err > 0 ? 0 : err ;
}
2017-10-19 21:48:57 +03:00
/* caller must lock inode page */
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
int f2fs_truncate_xattr_node ( struct inode * inode )
2013-08-14 15:40:06 +04:00
{
2014-09-03 02:31:18 +04:00
struct f2fs_sb_info * sbi = F2FS_I_SB ( inode ) ;
2013-08-14 15:40:06 +04:00
nid_t nid = F2FS_I ( inode ) - > i_xattr_nid ;
struct dnode_of_data dn ;
struct page * npage ;
2018-07-16 19:02:17 +03:00
int err ;
2013-08-14 15:40:06 +04:00
if ( ! nid )
return 0 ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
npage = f2fs_get_node_page ( sbi , nid ) ;
2013-08-14 15:40:06 +04:00
if ( IS_ERR ( npage ) )
return PTR_ERR ( npage ) ;
2018-07-16 19:02:17 +03:00
set_new_dnode ( & dn , inode , NULL , npage , nid ) ;
err = truncate_node ( & dn ) ;
if ( err ) {
f2fs_put_page ( npage , 1 ) ;
return err ;
}
2016-05-20 19:52:20 +03:00
f2fs_i_xnid_write ( inode , 0 ) ;
2013-08-14 16:57:27 +04:00
2013-08-14 15:40:06 +04:00
return 0 ;
}
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 11:21:29 +04:00
/*
2013-12-21 14:02:14 +04:00
* Caller should grab and release a rwsem by calling f2fs_lock_op ( ) and
* f2fs_unlock_op ( ) .
f2fs: introduce a new global lock scheme
In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.
Reference the following lock types in f2fs.h.
enum lock_type {
RENAME, /* for renaming operations */
DENTRY_OPS, /* for directory operations */
DATA_WRITE, /* for data write */
DATA_NEW, /* for data allocation */
DATA_TRUNC, /* for data truncate */
NODE_NEW, /* for node allocation */
NODE_TRUNC, /* for node truncate */
NODE_WRITE, /* for node write */
NR_LOCK_TYPE,
};
In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.
In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.
For this, I propose a new global lock scheme as follows.
0. Data structure
- f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
- f2fs_sb_info -> node_write
1. mutex_lock_op(sbi)
- try to get an avaiable lock from the array.
- returns the index of the gottern lock variable.
2. mutex_unlock_op(sbi, index of the lock)
- unlock the given index of the lock.
3. mutex_lock_all(sbi)
- grab all the locks in the array before the checkpoint.
4. mutex_unlock_all(sbi)
- release all the locks in the array after checkpoint.
5. block_operations()
- call mutex_lock_all()
- sync_dirty_dir_inodes()
- grab node_write
- sync_node_pages()
Note that,
the pairs of mutex_lock_op()/mutex_unlock_op() and
mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 11:21:29 +04:00
*/
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
int f2fs_remove_inode_page ( struct inode * inode )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
struct dnode_of_data dn ;
2015-08-24 12:40:45 +03:00
int err ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2014-08-26 01:45:59 +04:00
set_new_dnode ( & dn , inode , NULL , NULL , inode - > i_ino ) ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
err = f2fs_get_dnode_of_data ( & dn , 0 , LOOKUP_NODE ) ;
2015-08-24 12:40:45 +03:00
if ( err )
return err ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
err = f2fs_truncate_xattr_node ( inode ) ;
2015-08-24 12:40:45 +03:00
if ( err ) {
2014-08-26 01:45:59 +04:00
f2fs_put_dnode ( & dn ) ;
2015-08-24 12:40:45 +03:00
return err ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2014-08-26 01:45:59 +04:00
/* remove potential inline_data blocks */
if ( S_ISREG ( inode - > i_mode ) | | S_ISDIR ( inode - > i_mode ) | |
S_ISLNK ( inode - > i_mode ) )
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_truncate_data_blocks_range ( & dn , 1 ) ;
2014-08-26 01:45:59 +04:00
2014-08-06 18:22:50 +04:00
/* 0 is possible, after f2fs_new_inode() has failed */
2018-07-31 19:09:01 +03:00
if ( unlikely ( f2fs_cp_error ( F2FS_I_SB ( inode ) ) ) ) {
f2fs_put_dnode ( & dn ) ;
return - EIO ;
}
2019-04-15 10:28:34 +03:00
if ( unlikely ( inode - > i_blocks ! = 0 & & inode - > i_blocks ! = 8 ) ) {
2020-02-24 14:20:19 +03:00
f2fs_warn ( F2FS_I_SB ( inode ) ,
" f2fs_remove_inode_page: inconsistent i_blocks, ino:%lu, iblocks:%llu " ,
inode - > i_ino , ( unsigned long long ) inode - > i_blocks ) ;
2019-04-15 10:28:34 +03:00
set_sbi_flag ( F2FS_I_SB ( inode ) , SBI_NEED_FSCK ) ;
}
2014-08-26 01:45:59 +04:00
/* will put inode & node pages */
2018-07-16 19:02:17 +03:00
err = truncate_node ( & dn ) ;
if ( err ) {
f2fs_put_dnode ( & dn ) ;
return err ;
}
2015-08-24 12:40:45 +03:00
return 0 ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
struct page * f2fs_new_inode_page ( struct inode * inode )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
struct dnode_of_data dn ;
/* allocate inode page for new inode */
set_new_dnode ( & dn , inode , NULL , NULL , inode - > i_ino ) ;
2013-05-20 05:10:29 +04:00
/* caller should f2fs_put_page(page, 1); */
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
return f2fs_new_node_page ( & dn , 0 ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
struct page * f2fs_new_node_page ( struct dnode_of_data * dn , unsigned int ofs )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
2014-09-03 02:31:18 +04:00
struct f2fs_sb_info * sbi = F2FS_I_SB ( dn - > inode ) ;
2017-02-14 04:02:44 +03:00
struct node_info new_ni ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
struct page * page ;
int err ;
2016-05-20 20:13:22 +03:00
if ( unlikely ( is_inode_flag_set ( dn - > inode , FI_NO_ALLOC ) ) )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
return ERR_PTR ( - EPERM ) ;
2016-04-30 02:11:53 +03:00
page = f2fs_grab_cache_page ( NODE_MAPPING ( sbi ) , dn - > nid , false ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( ! page )
return ERR_PTR ( - ENOMEM ) ;
2017-07-08 19:13:07 +03:00
if ( unlikely ( ( err = inc_valid_node_count ( sbi , dn - > inode , ! ofs ) ) ) )
2013-08-12 11:00:46 +04:00
goto fail ;
2017-07-08 19:13:07 +03:00
2017-02-14 04:02:44 +03:00
# ifdef CONFIG_F2FS_CHECK_FS
2021-12-14 01:16:32 +03:00
err = f2fs_get_node_info ( sbi , dn - > nid , & new_ni , false ) ;
2018-07-16 19:02:17 +03:00
if ( err ) {
dec_valid_node_count ( sbi , dn - > inode , ! ofs ) ;
goto fail ;
}
2022-07-24 19:03:23 +03:00
if ( unlikely ( new_ni . blk_addr ! = NULL_ADDR ) ) {
err = - EFSCORRUPTED ;
set_sbi_flag ( sbi , SBI_NEED_FSCK ) ;
2022-09-28 18:38:54 +03:00
f2fs_handle_error ( sbi , ERROR_INVALID_BLKADDR ) ;
2022-07-24 19:03:23 +03:00
goto fail ;
}
2017-02-14 04:02:44 +03:00
# endif
new_ni . nid = dn - > nid ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
new_ni . ino = dn - > inode - > i_ino ;
2017-02-14 04:02:44 +03:00
new_ni . blk_addr = NULL_ADDR ;
new_ni . flag = 0 ;
new_ni . version = 0 ;
2014-03-20 16:52:53 +04:00
set_node_addr ( sbi , & new_ni , NEW_ADDR , false ) ;
2013-08-12 11:00:46 +04:00
2018-12-25 12:43:42 +03:00
f2fs_wait_on_page_writeback ( page , NODE , true , true ) ;
2013-08-12 11:00:46 +04:00
fill_node_footer ( page , dn - > nid , dn - > inode - > i_ino , ofs , true ) ;
2018-03-09 09:24:22 +03:00
set_cold_node ( page , S_ISDIR ( dn - > inode - > i_mode ) ) ;
2016-07-01 04:49:15 +03:00
if ( ! PageUptodate ( page ) )
SetPageUptodate ( page ) ;
2016-01-08 00:23:12 +03:00
if ( set_page_dirty ( page ) )
dn - > node_changed = true ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2014-03-17 12:35:06 +04:00
if ( f2fs_has_xattr_block ( ofs ) )
2016-05-20 19:52:20 +03:00
f2fs_i_xnid_write ( dn - > inode , dn - > nid ) ;
2013-08-12 11:04:53 +04:00
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( ofs = = 0 )
inc_valid_inode_count ( sbi ) ;
return page ;
fail :
2012-12-20 10:10:06 +04:00
clear_node_page_dirty ( page ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
f2fs_put_page ( page , 1 ) ;
return ERR_PTR ( err ) ;
}
2013-03-31 07:47:20 +04:00
/*
* Caller should do after getting the following values .
* 0 : f2fs_put_page ( page , 0 )
2015-07-15 23:08:21 +03:00
* LOCKED_PAGE or error : f2fs_put_page ( page , 1 )
2013-03-31 07:47:20 +04:00
*/
2022-07-14 21:07:18 +03:00
static int read_node_page ( struct page * page , blk_opf_t op_flags )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
2014-09-03 02:31:18 +04:00
struct f2fs_sb_info * sbi = F2FS_P_SB ( page ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
struct node_info ni ;
2014-12-18 06:33:13 +03:00
struct f2fs_io_info fio = {
2015-04-24 00:38:15 +03:00
. sbi = sbi ,
2014-12-18 06:33:13 +03:00
. type = NODE ,
2016-06-05 22:31:55 +03:00
. op = REQ_OP_READ ,
. op_flags = op_flags ,
2015-04-24 00:38:15 +03:00
. page = page ,
2015-04-23 22:04:33 +03:00
. encrypted_page = NULL ,
2014-12-18 06:33:13 +03:00
} ;
2018-07-16 19:02:17 +03:00
int err ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2018-03-09 18:10:21 +03:00
if ( PageUptodate ( page ) ) {
2019-04-15 10:28:35 +03:00
if ( ! f2fs_inode_chksum_verify ( sbi , page ) ) {
ClearPageUptodate ( page ) ;
2019-06-20 06:36:14 +03:00
return - EFSBADCRC ;
2019-04-15 10:28:35 +03:00
}
2016-07-01 05:04:16 +03:00
return LOCKED_PAGE ;
2018-03-09 18:10:21 +03:00
}
2016-07-01 05:04:16 +03:00
2021-12-14 01:16:32 +03:00
err = f2fs_get_node_info ( sbi , page - > index , & ni , false ) ;
2018-07-16 19:02:17 +03:00
if ( err )
return err ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2021-07-26 19:12:15 +03:00
/* NEW_ADDR can be seen, after cp_error drops some dirty node pages */
2022-11-09 04:59:34 +03:00
if ( unlikely ( ni . blk_addr = = NULL_ADDR | | ni . blk_addr = = NEW_ADDR ) ) {
2015-02-26 06:25:01 +03:00
ClearPageUptodate ( page ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
return - ENOENT ;
2013-03-08 16:29:23 +04:00
}
f2fs: trace old block address for CoWed page
This patch enables to trace old block address of CoWed page for better
debugging.
f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4f0, oldaddr = 0xfe8ab, newaddr = 0xfee90 rw = WRITE_SYNC, type = NODE
f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4f8, oldaddr = 0xfe8b0, newaddr = 0xfee91 rw = WRITE_SYNC, type = NODE
f2fs_submit_page_mbio: dev = (1,0), ino = 1, page_index = 0x1d4fa, oldaddr = 0xfe8ae, newaddr = 0xfee92 rw = WRITE_SYNC, type = NODE
f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x96, oldaddr = 0xf049b, newaddr = 0x2bbe rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x97, oldaddr = 0xf049c, newaddr = 0x2bbf rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 134824, page_index = 0x98, oldaddr = 0xf049d, newaddr = 0x2bc0 rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x47, oldaddr = 0xffffffff, newaddr = 0xf2631 rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x48, oldaddr = 0xffffffff, newaddr = 0xf2632 rw = WRITE, type = DATA
f2fs_submit_page_mbio: dev = (1,0), ino = 135260, page_index = 0x49, oldaddr = 0xffffffff, newaddr = 0xf2633 rw = WRITE, type = DATA
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-22 13:36:38 +03:00
fio . new_blkaddr = fio . old_blkaddr = ni . blk_addr ;
2020-04-16 13:16:56 +03:00
err = f2fs_submit_page_bio ( & fio ) ;
if ( ! err )
2022-08-20 06:04:41 +03:00
f2fs_update_iostat ( sbi , NULL , FS_NODE_READ_IO , F2FS_BLKSIZE ) ;
2020-04-16 13:16:56 +03:00
return err ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2012-11-29 08:28:09 +04:00
/*
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
* Readahead a node page
*/
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
void f2fs_ra_node_page ( struct f2fs_sb_info * sbi , nid_t nid )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
struct page * apage ;
2013-03-31 07:47:20 +04:00
int err ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2016-01-08 15:13:37 +03:00
if ( ! nid )
return ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
if ( f2fs_check_nid_range ( sbi , nid ) )
2018-04-24 08:02:31 +03:00
return ;
2016-01-08 15:13:37 +03:00
2017-12-05 04:25:25 +03:00
apage = xa_load ( & NODE_MAPPING ( sbi ) - > i_pages , nid ) ;
2016-02-29 09:29:51 +03:00
if ( apage )
2013-03-08 16:29:23 +04:00
return ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2016-04-30 02:11:53 +03:00
apage = f2fs_grab_cache_page ( NODE_MAPPING ( sbi ) , nid , false ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( ! apage )
return ;
2016-07-19 12:28:41 +03:00
err = read_node_page ( apage , REQ_RAHEAD ) ;
2015-07-15 23:08:21 +03:00
f2fs_put_page ( apage , err ? 1 : 0 ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2016-03-08 20:04:35 +03:00
static struct page * __get_node_page ( struct f2fs_sb_info * sbi , pgoff_t nid ,
2016-01-05 11:52:46 +03:00
struct page * parent , int start )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
struct page * page ;
2016-01-05 11:52:46 +03:00
int err ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( ! nid )
return ERR_PTR ( - ENOENT ) ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
if ( f2fs_check_nid_range ( sbi , nid ) )
2018-04-24 08:02:31 +03:00
return ERR_PTR ( - EINVAL ) ;
2013-04-26 06:55:17 +04:00
repeat :
2016-04-30 02:11:53 +03:00
page = f2fs_grab_cache_page ( NODE_MAPPING ( sbi ) , nid , false ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( ! page )
return ERR_PTR ( - ENOMEM ) ;
2016-11-01 16:40:10 +03:00
err = read_node_page ( page , 0 ) ;
2015-07-15 23:08:21 +03:00
if ( err < 0 ) {
2022-03-30 02:25:54 +03:00
goto out_put_err ;
2015-07-15 23:08:21 +03:00
} else if ( err = = LOCKED_PAGE ) {
2017-06-07 06:17:35 +03:00
err = 0 ;
2013-03-31 07:47:20 +04:00
goto page_hit ;
2015-07-15 23:08:21 +03:00
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2016-01-05 11:52:46 +03:00
if ( parent )
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_ra_node_pages ( parent , start + 1 , MAX_RA_NODE ) ;
f2fs: give a chance to merge IOs by IO scheduler
Previously, background GC submits many 4KB read requests to load victim blocks
and/or its (i)node blocks.
...
f2fs_gc : f2fs_readpage: ino = 1, page_index = 0xb61, blkaddr = 0x3b964ed
f2fs_gc : block_rq_complete: 8,16 R () 499854968 + 8 [0]
f2fs_gc : f2fs_readpage: ino = 1, page_index = 0xb6f, blkaddr = 0x3b964ee
f2fs_gc : block_rq_complete: 8,16 R () 499854976 + 8 [0]
f2fs_gc : f2fs_readpage: ino = 1, page_index = 0xb79, blkaddr = 0x3b964ef
f2fs_gc : block_rq_complete: 8,16 R () 499854984 + 8 [0]
...
However, by the fact that many IOs are sequential, we can give a chance to merge
the IOs by IO scheduler.
In order to do that, let's use blk_plug.
...
f2fs_gc : f2fs_iget: ino = 143
f2fs_gc : f2fs_readpage: ino = 143, page_index = 0x1c6, blkaddr = 0x2e6ee
f2fs_gc : f2fs_iget: ino = 143
f2fs_gc : f2fs_readpage: ino = 143, page_index = 0x1c7, blkaddr = 0x2e6ef
<idle> : block_rq_complete: 8,16 R () 1519616 + 8 [0]
<idle> : block_rq_complete: 8,16 R () 1519848 + 8 [0]
<idle> : block_rq_complete: 8,16 R () 1520432 + 96 [0]
<idle> : block_rq_complete: 8,16 R () 1520536 + 104 [0]
<idle> : block_rq_complete: 8,16 R () 1521008 + 112 [0]
<idle> : block_rq_complete: 8,16 R () 1521440 + 152 [0]
<idle> : block_rq_complete: 8,16 R () 1521688 + 144 [0]
<idle> : block_rq_complete: 8,16 R () 1522128 + 192 [0]
<idle> : block_rq_complete: 8,16 R () 1523256 + 328 [0]
...
Note that this issue should be addressed in checkpoint, and some readahead
flows too.
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-24 08:19:56 +04:00
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
lock_page ( page ) ;
2016-01-05 11:52:46 +03:00
2014-01-21 13:51:16 +04:00
if ( unlikely ( page - > mapping ! = NODE_MAPPING ( sbi ) ) ) {
2013-04-26 06:55:17 +04:00
f2fs_put_page ( page , 1 ) ;
goto repeat ;
}
2016-07-03 17:05:12 +03:00
2017-06-07 06:17:35 +03:00
if ( unlikely ( ! PageUptodate ( page ) ) ) {
err = - EIO ;
2016-07-03 17:05:12 +03:00
goto out_err ;
2017-06-07 06:17:35 +03:00
}
2017-07-31 15:19:09 +03:00
if ( ! f2fs_inode_chksum_verify ( sbi , page ) ) {
2019-06-20 06:36:14 +03:00
err = - EFSBADCRC ;
2017-07-31 15:19:09 +03:00
goto out_err ;
}
2013-02-02 18:51:51 +04:00
page_hit :
2022-03-30 02:25:54 +03:00
if ( likely ( nid = = nid_of_node ( page ) ) )
return page ;
f2fs_warn ( sbi , " inconsistent node block, nid:%lu, node_footer[nid:%u,ino:%u,ofs:%u,cpver:%llu,blkaddr:%u] " ,
2019-06-18 12:48:42 +03:00
nid , nid_of_node ( page ) , ino_of_node ( page ) ,
ofs_of_node ( page ) , cpver_of_node ( page ) ,
next_blkaddr_of_node ( page ) ) ;
2022-03-30 02:25:54 +03:00
set_sbi_flag ( sbi , SBI_NEED_FSCK ) ;
err = - EINVAL ;
2016-05-26 14:40:29 +03:00
out_err :
2022-03-30 02:25:54 +03:00
ClearPageUptodate ( page ) ;
out_put_err :
2022-06-18 10:42:24 +03:00
/* ENOENT comes from read_node_page which is not an error. */
if ( err ! = - ENOENT )
f2fs_handle_page_eio ( sbi , page - > index , NODE ) ;
2022-03-30 02:25:54 +03:00
f2fs_put_page ( page , 1 ) ;
return ERR_PTR ( err ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
struct page * f2fs_get_node_page ( struct f2fs_sb_info * sbi , pgoff_t nid )
2016-01-05 11:52:46 +03:00
{
return __get_node_page ( sbi , nid , NULL , 0 ) ;
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
struct page * f2fs_get_node_page_ra ( struct page * parent , int start )
2016-01-05 11:52:46 +03:00
{
struct f2fs_sb_info * sbi = F2FS_P_SB ( parent ) ;
nid_t nid = get_nid ( parent , start , false ) ;
return __get_node_page ( sbi , nid , parent , start ) ;
}
2016-01-25 16:57:05 +03:00
static void flush_inline_data ( struct f2fs_sb_info * sbi , nid_t ino )
{
struct inode * inode ;
struct page * page ;
2016-05-20 19:11:09 +03:00
int ret ;
2016-01-25 16:57:05 +03:00
/* should flush inline_data before evict_inode */
inode = ilookup ( sbi - > sb , ino ) ;
if ( ! inode )
return ;
2017-10-28 11:52:30 +03:00
page = f2fs_pagecache_get_page ( inode - > i_mapping , 0 ,
FGP_LOCK | FGP_NOWAIT , 0 ) ;
2016-01-25 16:57:05 +03:00
if ( ! page )
goto iput_out ;
if ( ! PageUptodate ( page ) )
goto page_out ;
if ( ! PageDirty ( page ) )
goto page_out ;
if ( ! clear_page_dirty_for_io ( page ) )
goto page_out ;
2016-05-20 19:11:09 +03:00
ret = f2fs_write_inline_data ( inode , page ) ;
inode_dec_dirty_pages ( inode ) ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_remove_dirty_inode ( inode ) ;
2016-05-20 19:11:09 +03:00
if ( ret )
2016-01-25 16:57:05 +03:00
set_page_dirty ( page ) ;
page_out :
2016-03-30 21:25:31 +03:00
f2fs_put_page ( page , 1 ) ;
2016-01-25 16:57:05 +03:00
iput_out :
iput ( inode ) ;
}
2016-04-15 19:43:17 +03:00
static struct page * last_fsync_dnode ( struct f2fs_sb_info * sbi , nid_t ino )
{
2017-11-16 04:34:51 +03:00
pgoff_t index ;
2016-04-15 19:43:17 +03:00
struct pagevec pvec ;
struct page * last_page = NULL ;
2017-11-16 04:34:51 +03:00
int nr_pages ;
2016-04-15 19:43:17 +03:00
2017-11-16 04:37:52 +03:00
pagevec_init ( & pvec ) ;
2016-04-15 19:43:17 +03:00
index = 0 ;
2017-11-16 04:34:51 +03:00
while ( ( nr_pages = pagevec_lookup_tag ( & pvec , NODE_MAPPING ( sbi ) , & index ,
2017-11-16 04:35:19 +03:00
PAGECACHE_TAG_DIRTY ) ) ) {
2017-11-16 04:34:51 +03:00
int i ;
2016-04-15 19:43:17 +03:00
for ( i = 0 ; i < nr_pages ; i + + ) {
struct page * page = pvec . pages [ i ] ;
if ( unlikely ( f2fs_cp_error ( sbi ) ) ) {
f2fs_put_page ( last_page , 0 ) ;
pagevec_release ( & pvec ) ;
return ERR_PTR ( - EIO ) ;
}
if ( ! IS_DNODE ( page ) | | ! is_cold_node ( page ) )
continue ;
if ( ino_of_node ( page ) ! = ino )
continue ;
lock_page ( page ) ;
if ( unlikely ( page - > mapping ! = NODE_MAPPING ( sbi ) ) ) {
continue_unlock :
unlock_page ( page ) ;
continue ;
}
if ( ino_of_node ( page ) ! = ino )
goto continue_unlock ;
if ( ! PageDirty ( page ) ) {
/* someone wrote it for us */
goto continue_unlock ;
}
if ( last_page )
f2fs_put_page ( last_page , 0 ) ;
get_page ( page ) ;
last_page = page ;
unlock_page ( page ) ;
}
pagevec_release ( & pvec ) ;
cond_resched ( ) ;
}
return last_page ;
}
2017-02-04 04:44:04 +03:00
static int __write_node_page ( struct page * page , bool atomic , bool * submitted ,
2017-08-02 18:21:48 +03:00
struct writeback_control * wbc , bool do_balance ,
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
enum iostat_type io_type , unsigned int * seq_id )
2017-02-03 05:27:17 +03:00
{
struct f2fs_sb_info * sbi = F2FS_P_SB ( page ) ;
nid_t nid ;
struct node_info ni ;
struct f2fs_io_info fio = {
. sbi = sbi ,
2017-09-29 08:59:38 +03:00
. ino = ino_of_node ( page ) ,
2017-02-03 05:27:17 +03:00
. type = NODE ,
. op = REQ_OP_WRITE ,
. op_flags = wbc_to_write_flags ( wbc ) ,
. page = page ,
. encrypted_page = NULL ,
2017-02-04 04:44:04 +03:00
. submitted = false ,
2017-08-02 18:21:48 +03:00
. io_type = io_type ,
2018-01-09 14:33:39 +03:00
. io_wbc = wbc ,
2017-02-03 05:27:17 +03:00
} ;
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
unsigned int seq ;
2017-02-03 05:27:17 +03:00
trace_f2fs_writepage ( page , NODE ) ;
2020-05-19 04:00:33 +03:00
if ( unlikely ( f2fs_cp_error ( sbi ) ) ) {
2021-07-07 08:05:06 +03:00
ClearPageUptodate ( page ) ;
dec_page_count ( sbi , F2FS_DIRTY_NODES ) ;
unlock_page ( page ) ;
return 0 ;
2020-05-19 04:00:33 +03:00
}
2018-01-18 12:29:10 +03:00
2017-02-03 05:27:17 +03:00
if ( unlikely ( is_sbi_flag_set ( sbi , SBI_POR_DOING ) ) )
goto redirty_out ;
2019-08-29 05:58:26 +03:00
if ( ! is_sbi_flag_set ( sbi , SBI_CP_DISABLED ) & &
wbc - > sync_mode = = WB_SYNC_NONE & &
2018-07-25 14:16:21 +03:00
IS_DNODE ( page ) & & is_cold_node ( page ) )
goto redirty_out ;
2017-02-03 05:27:17 +03:00
/* get old block addr of this node page */
nid = nid_of_node ( page ) ;
f2fs_bug_on ( sbi , page - > index ! = nid ) ;
2021-12-14 01:16:32 +03:00
if ( f2fs_get_node_info ( sbi , nid , & ni , ! do_balance ) )
2018-07-16 19:02:17 +03:00
goto redirty_out ;
2017-02-03 05:27:17 +03:00
if ( wbc - > for_reclaim ) {
2022-01-07 23:48:44 +03:00
if ( ! f2fs_down_read_trylock ( & sbi - > node_write ) )
2017-02-03 05:27:17 +03:00
goto redirty_out ;
} else {
2022-01-07 23:48:44 +03:00
f2fs_down_read ( & sbi - > node_write ) ;
2017-02-03 05:27:17 +03:00
}
/* This page is already truncated */
if ( unlikely ( ni . blk_addr = = NULL_ADDR ) ) {
ClearPageUptodate ( page ) ;
dec_page_count ( sbi , F2FS_DIRTY_NODES ) ;
2022-01-07 23:48:44 +03:00
f2fs_up_read ( & sbi - > node_write ) ;
2017-02-03 05:27:17 +03:00
unlock_page ( page ) ;
return 0 ;
}
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 14:13:44 +03:00
if ( __is_valid_data_blkaddr ( ni . blk_addr ) & &
f2fs: introduce DATA_GENERIC_ENHANCE
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215
https://bugzilla.kernel.org/show_bug.cgi?id=203223
https://bugzilla.kernel.org/show_bug.cgi?id=203231
https://bugzilla.kernel.org/show_bug.cgi?id=203235
https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-04-15 10:26:32 +03:00
! f2fs_is_valid_blkaddr ( sbi , ni . blk_addr ,
DATA_GENERIC_ENHANCE ) ) {
2022-01-07 23:48:44 +03:00
f2fs_up_read ( & sbi - > node_write ) ;
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 14:13:44 +03:00
goto redirty_out ;
2018-09-28 08:15:31 +03:00
}
f2fs: fix to do sanity check with block address in main area
This patch add to do sanity check with below field:
- cp_pack_total_block_count
- blkaddr of data/node
- extent info
- Overview
BUG() in verify_block_addr() when writing to a corrupted f2fs image
- Reproduce (4.18 upstream kernel)
- POC (poc.c)
static void activity(char *mpoint) {
char *foo_bar_baz;
int err;
static int buf[8192];
memset(buf, 0, sizeof(buf));
err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint);
int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777);
if (fd >= 0) {
write(fd, (char *)buf, sizeof(buf));
fdatasync(fd);
close(fd);
}
}
int main(int argc, char *argv[]) {
activity(argv[1]);
return 0;
}
- Kernel message
[ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3
[ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240
[ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4
[ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240
[ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d
[ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202
[ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113
[ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540
[ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8
[ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540
[ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450
[ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.729171] Call Trace:
[ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.729269] ? __radix_tree_replace+0xa3/0x120
[ 699.729276] __write_data_page+0x5c7/0xe30
[ 699.729291] ? kasan_check_read+0x11/0x20
[ 699.729310] ? page_mapped+0x8a/0x110
[ 699.729321] ? page_mkclean+0xe9/0x160
[ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.729331] ? invalid_page_referenced_vma+0x130/0x130
[ 699.729345] ? clear_page_dirty_for_io+0x332/0x450
[ 699.729351] f2fs_write_cache_pages+0x4ca/0x860
[ 699.729358] ? __write_data_page+0xe30/0xe30
[ 699.729374] ? percpu_counter_add_batch+0x22/0xa0
[ 699.729380] ? kasan_check_write+0x14/0x20
[ 699.729391] ? _raw_spin_lock+0x17/0x40
[ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.729413] ? iov_iter_advance+0x113/0x640
[ 699.729418] ? f2fs_write_end+0x133/0x2e0
[ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.729428] f2fs_write_data_pages+0x329/0x520
[ 699.729433] ? generic_perform_write+0x250/0x320
[ 699.729438] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729454] ? current_time+0x110/0x110
[ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.729464] do_writepages+0x37/0xb0
[ 699.729468] ? f2fs_write_cache_pages+0x860/0x860
[ 699.729472] ? do_writepages+0x37/0xb0
[ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.729496] ? __vfs_write+0x2b2/0x410
[ 699.729501] file_write_and_wait_range+0x66/0xb0
[ 699.729506] f2fs_do_sync_file+0x1f9/0xd90
[ 699.729511] ? truncate_partial_data_page+0x290/0x290
[ 699.729521] ? __sb_end_write+0x30/0x50
[ 699.729526] ? vfs_write+0x20f/0x260
[ 699.729530] f2fs_sync_file+0x9a/0xb0
[ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.729548] vfs_fsync_range+0x68/0x100
[ 699.729554] ? __fget_light+0xc9/0xe0
[ 699.729558] do_fsync+0x3d/0x70
[ 699.729562] __x64_sys_fdatasync+0x24/0x30
[ 699.729585] do_syscall_64+0x78/0x170
[ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.729613] RIP: 0033:0x7f9bf930d800
[ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]---
[ 699.729782] ------------[ cut here ]------------
[ 699.729785] kernel BUG at fs/f2fs/segment.h:654!
[ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4
[ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.752874] Call Trace:
[ 699.753386] ? f2fs_inplace_write_data+0x93/0x240
[ 699.754341] f2fs_inplace_write_data+0xd2/0x240
[ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00
[ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0
[ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280
[ 699.758209] ? __radix_tree_replace+0xa3/0x120
[ 699.759164] __write_data_page+0x5c7/0xe30
[ 699.760002] ? kasan_check_read+0x11/0x20
[ 699.760823] ? page_mapped+0x8a/0x110
[ 699.761573] ? page_mkclean+0xe9/0x160
[ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00
[ 699.763332] ? invalid_page_referenced_vma+0x130/0x130
[ 699.764374] ? clear_page_dirty_for_io+0x332/0x450
[ 699.765347] f2fs_write_cache_pages+0x4ca/0x860
[ 699.766276] ? __write_data_page+0xe30/0xe30
[ 699.767161] ? percpu_counter_add_batch+0x22/0xa0
[ 699.768112] ? kasan_check_write+0x14/0x20
[ 699.768951] ? _raw_spin_lock+0x17/0x40
[ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30
[ 699.770885] ? iov_iter_advance+0x113/0x640
[ 699.771743] ? f2fs_write_end+0x133/0x2e0
[ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640
[ 699.773680] f2fs_write_data_pages+0x329/0x520
[ 699.774603] ? generic_perform_write+0x250/0x320
[ 699.775544] ? f2fs_write_cache_pages+0x860/0x860
[ 699.776510] ? current_time+0x110/0x110
[ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370
[ 699.778279] do_writepages+0x37/0xb0
[ 699.779026] ? f2fs_write_cache_pages+0x860/0x860
[ 699.779978] ? do_writepages+0x37/0xb0
[ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0
[ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0
[ 699.782820] ? __vfs_write+0x2b2/0x410
[ 699.783597] file_write_and_wait_range+0x66/0xb0
[ 699.784540] f2fs_do_sync_file+0x1f9/0xd90
[ 699.785381] ? truncate_partial_data_page+0x290/0x290
[ 699.786415] ? __sb_end_write+0x30/0x50
[ 699.787204] ? vfs_write+0x20f/0x260
[ 699.787941] f2fs_sync_file+0x9a/0xb0
[ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.789572] vfs_fsync_range+0x68/0x100
[ 699.790360] ? __fget_light+0xc9/0xe0
[ 699.791128] do_fsync+0x3d/0x70
[ 699.791779] __x64_sys_fdatasync+0x24/0x30
[ 699.792614] do_syscall_64+0x78/0x170
[ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 699.794406] RIP: 0033:0x7f9bf930d800
[ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24
[ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy
[ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]---
[ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730
[ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0
[ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283
[ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef
[ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c
[ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55
[ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940
[ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001
[ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000
[ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0
[ 699.835556] ==================================================================
[ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0
[ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309
[ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4
[ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 699.843475] Call Trace:
[ 699.843982] dump_stack+0x7b/0xb5
[ 699.844661] print_address_description+0x70/0x290
[ 699.845607] kasan_report+0x291/0x390
[ 699.846351] ? update_stack_state+0x38c/0x3e0
[ 699.853831] __asan_load8+0x54/0x90
[ 699.854569] update_stack_state+0x38c/0x3e0
[ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20
[ 699.856601] ? __save_stack_trace+0x5e/0x100
[ 699.857476] unwind_next_frame.part.5+0x18e/0x490
[ 699.858448] ? unwind_dump+0x290/0x290
[ 699.859217] ? clear_page_dirty_for_io+0x332/0x450
[ 699.860185] __unwind_start+0x106/0x190
[ 699.860974] __save_stack_trace+0x5e/0x100
[ 699.861808] ? __save_stack_trace+0x5e/0x100
[ 699.862691] ? unlink_anon_vmas+0xba/0x2c0
[ 699.863525] save_stack_trace+0x1f/0x30
[ 699.864312] save_stack+0x46/0xd0
[ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420
[ 699.865990] ? flush_tlb_mm_range+0x15e/0x220
[ 699.866889] ? kasan_check_write+0x14/0x20
[ 699.867724] ? __dec_node_state+0x92/0xb0
[ 699.868543] ? lock_page_memcg+0x85/0xf0
[ 699.869350] ? unlock_page_memcg+0x16/0x80
[ 699.870185] ? page_remove_rmap+0x198/0x520
[ 699.871048] ? mark_page_accessed+0x133/0x200
[ 699.871930] ? _cond_resched+0x1a/0x50
[ 699.872700] ? unmap_page_range+0xcd4/0xe50
[ 699.873551] ? rb_next+0x58/0x80
[ 699.874217] ? rb_next+0x58/0x80
[ 699.874895] __kasan_slab_free+0x13c/0x1a0
[ 699.875734] ? unlink_anon_vmas+0xba/0x2c0
[ 699.876563] kasan_slab_free+0xe/0x10
[ 699.877315] kmem_cache_free+0x89/0x1e0
[ 699.878095] unlink_anon_vmas+0xba/0x2c0
[ 699.878913] free_pgtables+0x101/0x1b0
[ 699.879677] exit_mmap+0x146/0x2a0
[ 699.880378] ? __ia32_sys_munmap+0x50/0x50
[ 699.881214] ? kasan_check_read+0x11/0x20
[ 699.882052] ? mm_update_next_owner+0x322/0x380
[ 699.882985] mmput+0x8b/0x1d0
[ 699.883602] do_exit+0x43a/0x1390
[ 699.884288] ? mm_update_next_owner+0x380/0x380
[ 699.885212] ? f2fs_sync_file+0x9a/0xb0
[ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90
[ 699.886877] ? vfs_fsync_range+0x68/0x100
[ 699.887694] ? __fget_light+0xc9/0xe0
[ 699.888442] ? do_fsync+0x3d/0x70
[ 699.889118] ? __x64_sys_fdatasync+0x24/0x30
[ 699.889996] rewind_stack_do_exit+0x17/0x20
[ 699.890860] RIP: 0033:0x7f9bf930d800
[ 699.891585] Code: Bad RIP value.
[ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800
[ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003
[ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000
[ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610
[ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000
[ 699.901241] The buggy address belongs to the page:
[ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 699.903811] flags: 0x2ffff0000000000()
[ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000
[ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 699.907673] page dumped because: kasan: bad access detected
[ 699.909108] Memory state around the buggy address:
[ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00
[ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2
[ 699.914392] ^
[ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00
[ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00
[ 699.918634] ==================================================================
- Location
https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644
Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-01 14:13:44 +03:00
2022-04-19 02:57:44 +03:00
if ( atomic & & ! test_opt ( sbi , NOBARRIER ) & & ! f2fs_sb_has_blkzoned ( sbi ) )
2017-02-03 05:18:06 +03:00
fio . op_flags | = REQ_PREFLUSH | REQ_FUA ;
2020-02-14 12:45:12 +03:00
/* should add to global list before clearing PAGECACHE status */
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
if ( f2fs_in_warm_node_list ( sbi , page ) ) {
seq = f2fs_add_fsync_node_entry ( sbi , page ) ;
if ( seq_id )
* seq_id = seq ;
}
2020-02-14 12:45:12 +03:00
set_page_writeback ( page ) ;
ClearPageError ( page ) ;
2017-02-03 05:27:17 +03:00
fio . old_blkaddr = ni . blk_addr ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_do_write_node_page ( nid , & fio ) ;
2017-02-03 05:27:17 +03:00
set_node_addr ( sbi , & ni , fio . new_blkaddr , is_fsync_dnode ( page ) ) ;
dec_page_count ( sbi , F2FS_DIRTY_NODES ) ;
2022-01-07 23:48:44 +03:00
f2fs_up_read ( & sbi - > node_write ) ;
2017-02-03 05:27:17 +03:00
2017-02-04 04:44:04 +03:00
if ( wbc - > for_reclaim ) {
2018-09-27 18:41:16 +03:00
f2fs_submit_merged_write_cond ( sbi , NULL , page , 0 , NODE ) ;
2017-02-04 04:44:04 +03:00
submitted = NULL ;
}
2017-02-03 05:27:17 +03:00
unlock_page ( page ) ;
2017-02-04 04:44:04 +03:00
if ( unlikely ( f2fs_cp_error ( sbi ) ) ) {
2017-05-10 21:28:38 +03:00
f2fs_submit_merged_write ( sbi , NODE ) ;
2017-02-04 04:44:04 +03:00
submitted = NULL ;
}
if ( submitted )
* submitted = fio . submitted ;
2017-02-03 05:27:17 +03:00
2017-07-27 15:11:00 +03:00
if ( do_balance )
f2fs_balance_fs ( sbi , false ) ;
2017-02-03 05:27:17 +03:00
return 0 ;
redirty_out :
redirty_page_for_writepage ( wbc , page ) ;
return AOP_WRITEPAGE_ACTIVATE ;
}
2018-09-13 02:40:53 +03:00
int f2fs_move_node_page ( struct page * node_page , int gc_type )
2017-10-30 09:18:55 +03:00
{
2018-09-13 02:40:53 +03:00
int err = 0 ;
2017-10-30 09:18:55 +03:00
if ( gc_type = = FG_GC ) {
struct writeback_control wbc = {
. sync_mode = WB_SYNC_ALL ,
. nr_to_write = 1 ,
. for_reclaim = 0 ,
} ;
2018-12-25 12:43:42 +03:00
f2fs_wait_on_page_writeback ( node_page , NODE , true , true ) ;
2018-12-12 13:12:30 +03:00
set_page_dirty ( node_page ) ;
2018-09-13 02:40:53 +03:00
if ( ! clear_page_dirty_for_io ( node_page ) ) {
err = - EAGAIN ;
2017-10-30 09:18:55 +03:00
goto out_page ;
2018-09-13 02:40:53 +03:00
}
2017-10-30 09:18:55 +03:00
if ( __write_node_page ( node_page , false , NULL ,
2018-09-13 02:40:53 +03:00
& wbc , false , FS_GC_NODE_IO , NULL ) ) {
err = - EAGAIN ;
2017-10-30 09:18:55 +03:00
unlock_page ( node_page ) ;
2018-09-13 02:40:53 +03:00
}
2017-10-30 09:18:55 +03:00
goto release_page ;
} else {
/* set page dirty and write it */
if ( ! PageWriteback ( node_page ) )
set_page_dirty ( node_page ) ;
}
out_page :
unlock_page ( node_page ) ;
release_page :
f2fs_put_page ( node_page , 0 ) ;
2018-09-13 02:40:53 +03:00
return err ;
2017-10-30 09:18:55 +03:00
}
2017-02-03 05:27:17 +03:00
static int f2fs_write_node_page ( struct page * page ,
struct writeback_control * wbc )
{
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
return __write_node_page ( page , false , NULL , wbc , false ,
FS_NODE_IO , NULL ) ;
2017-02-03 05:27:17 +03:00
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
int f2fs_fsync_node_pages ( struct f2fs_sb_info * sbi , struct inode * inode ,
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
struct writeback_control * wbc , bool atomic ,
unsigned int * seq_id )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
2017-11-16 04:34:51 +03:00
pgoff_t index ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
struct pagevec pvec ;
2016-04-15 19:25:04 +03:00
int ret = 0 ;
2016-04-15 19:43:17 +03:00
struct page * last_page = NULL ;
bool marked = false ;
2016-05-21 06:42:37 +03:00
nid_t ino = inode - > i_ino ;
2017-11-16 04:34:51 +03:00
int nr_pages ;
2018-09-27 18:41:16 +03:00
int nwritten = 0 ;
2016-04-14 02:24:44 +03:00
2016-04-15 19:43:17 +03:00
if ( atomic ) {
last_page = last_fsync_dnode ( sbi , ino ) ;
if ( IS_ERR_OR_NULL ( last_page ) )
return PTR_ERR_OR_ZERO ( last_page ) ;
}
retry :
2017-11-16 04:37:52 +03:00
pagevec_init ( & pvec ) ;
2016-04-14 02:24:44 +03:00
index = 0 ;
2017-11-16 04:34:51 +03:00
while ( ( nr_pages = pagevec_lookup_tag ( & pvec , NODE_MAPPING ( sbi ) , & index ,
2017-11-16 04:35:19 +03:00
PAGECACHE_TAG_DIRTY ) ) ) {
2017-11-16 04:34:51 +03:00
int i ;
2016-04-14 02:24:44 +03:00
for ( i = 0 ; i < nr_pages ; i + + ) {
struct page * page = pvec . pages [ i ] ;
2017-02-04 04:44:04 +03:00
bool submitted = false ;
2016-04-14 02:24:44 +03:00
if ( unlikely ( f2fs_cp_error ( sbi ) ) ) {
2016-04-15 19:43:17 +03:00
f2fs_put_page ( last_page , 0 ) ;
2016-04-14 02:24:44 +03:00
pagevec_release ( & pvec ) ;
2016-10-11 17:57:06 +03:00
ret = - EIO ;
goto out ;
2016-04-14 02:24:44 +03:00
}
if ( ! IS_DNODE ( page ) | | ! is_cold_node ( page ) )
continue ;
if ( ino_of_node ( page ) ! = ino )
continue ;
lock_page ( page ) ;
if ( unlikely ( page - > mapping ! = NODE_MAPPING ( sbi ) ) ) {
continue_unlock :
unlock_page ( page ) ;
continue ;
}
if ( ino_of_node ( page ) ! = ino )
goto continue_unlock ;
2016-04-15 19:43:17 +03:00
if ( ! PageDirty ( page ) & & page ! = last_page ) {
2016-04-14 02:24:44 +03:00
/* someone wrote it for us */
goto continue_unlock ;
}
2018-12-25 12:43:42 +03:00
f2fs_wait_on_page_writeback ( page , NODE , true , true ) ;
2016-04-14 02:24:44 +03:00
2017-04-12 22:02:00 +03:00
set_fsync_mark ( page , 0 ) ;
set_dentry_mark ( page , 0 ) ;
2016-04-15 19:43:17 +03:00
if ( ! atomic | | page = = last_page ) {
set_fsync_mark ( page , 1 ) ;
2022-01-28 00:31:43 +03:00
percpu_counter_inc ( & sbi - > rf_node_block_count ) ;
2016-05-21 06:42:37 +03:00
if ( IS_INODE ( page ) ) {
if ( is_inode_flag_set ( inode ,
FI_DIRTY_INODE ) )
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_update_inode ( inode , page ) ;
2016-04-15 19:43:17 +03:00
set_dentry_mark ( page ,
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_need_dentry_mark ( sbi , ino ) ) ;
2016-05-21 06:42:37 +03:00
}
2020-07-24 11:55:28 +03:00
/* may be written by other thread */
2016-04-15 19:43:17 +03:00
if ( ! PageDirty ( page ) )
set_page_dirty ( page ) ;
}
if ( ! clear_page_dirty_for_io ( page ) )
goto continue_unlock ;
2016-04-14 02:24:44 +03:00
2017-02-03 05:18:06 +03:00
ret = __write_node_page ( page , atomic & &
2017-02-04 04:44:04 +03:00
page = = last_page ,
2017-08-02 18:21:48 +03:00
& submitted , wbc , true ,
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
FS_NODE_IO , seq_id ) ;
2016-04-15 19:25:04 +03:00
if ( ret ) {
2016-04-14 02:24:44 +03:00
unlock_page ( page ) ;
2016-04-15 19:43:17 +03:00
f2fs_put_page ( last_page , 0 ) ;
break ;
2017-02-04 04:44:04 +03:00
} else if ( submitted ) {
2018-09-27 18:41:16 +03:00
nwritten + + ;
2016-04-15 19:43:17 +03:00
}
2016-09-29 13:50:10 +03:00
2016-04-15 19:43:17 +03:00
if ( page = = last_page ) {
f2fs_put_page ( page , 0 ) ;
marked = true ;
2016-04-14 02:24:44 +03:00
break ;
2016-04-15 19:25:04 +03:00
}
2016-04-14 02:24:44 +03:00
}
pagevec_release ( & pvec ) ;
cond_resched ( ) ;
2016-04-15 19:43:17 +03:00
if ( ret | | marked )
2016-04-14 02:24:44 +03:00
break ;
}
2016-04-15 19:43:17 +03:00
if ( ! ret & & atomic & & ! marked ) {
2019-06-18 12:48:42 +03:00
f2fs_debug ( sbi , " Retry to write fsync mark: ino=%u, idx=%lx " ,
ino , last_page - > index ) ;
2016-04-15 19:43:17 +03:00
lock_page ( last_page ) ;
2018-12-25 12:43:42 +03:00
f2fs_wait_on_page_writeback ( last_page , NODE , true , true ) ;
2016-04-15 19:43:17 +03:00
set_page_dirty ( last_page ) ;
unlock_page ( last_page ) ;
goto retry ;
}
2016-10-11 17:57:06 +03:00
out :
2018-09-27 18:41:16 +03:00
if ( nwritten )
f2fs_submit_merged_write_cond ( sbi , NULL , NULL , ino , NODE ) ;
2021-04-06 04:47:35 +03:00
return ret ? - EIO : 0 ;
2016-04-14 02:24:44 +03:00
}
f2fs: fix to writeout dirty inode during node flush
As Eric reported:
On xfstest generic/204 on f2fs, I'm getting a kernel BUG.
allocate_segment_by_default+0x9d/0x100 [f2fs]
f2fs_allocate_data_block+0x3c0/0x5c0 [f2fs]
do_write_page+0x62/0x110 [f2fs]
f2fs_do_write_node_page+0x2b/0xa0 [f2fs]
__write_node_page+0x2ec/0x590 [f2fs]
f2fs_sync_node_pages+0x756/0x7e0 [f2fs]
block_operations+0x25b/0x350 [f2fs]
f2fs_write_checkpoint+0x104/0x1150 [f2fs]
f2fs_sync_fs+0xa2/0x120 [f2fs]
f2fs_balance_fs_bg+0x33c/0x390 [f2fs]
f2fs_write_node_pages+0x4c/0x1f0 [f2fs]
do_writepages+0x1c/0x70
__writeback_single_inode+0x45/0x320
writeback_sb_inodes+0x273/0x5c0
wb_writeback+0xff/0x2e0
wb_workfn+0xa1/0x370
process_one_work+0x138/0x350
worker_thread+0x4d/0x3d0
kthread+0x109/0x140
The root cause of this issue is, in a very small partition, e.g.
in generic/204 testcase of fstest suit, filesystem's free space
is 50MB, so at most we can write 12800 inline inode with command:
`echo XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX > $SCRATCH_MNT/$i`,
then filesystem will have:
- 12800 dirty inline data page
- 12800 dirty inode page
- and 12800 dirty imeta (dirty inode)
When we flush node-inode's page cache, we can also flush inline
data with each inode page, however it will run out-of-free-space
in device, then once it triggers checkpoint, there is no room for
huge number of imeta, at this time, GC is useless, as there is no
dirty segment at all.
In order to fix this, we try to recognize inode page during
node_inode's page flushing, and update inode page from dirty inode,
so that later another imeta (dirty inode) flush can be avoided.
Reported-and-tested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-08-22 15:17:56 +03:00
static int f2fs_match_ino ( struct inode * inode , unsigned long ino , void * data )
{
struct f2fs_sb_info * sbi = F2FS_I_SB ( inode ) ;
bool clean ;
if ( inode - > i_ino ! = ino )
return 0 ;
if ( ! is_inode_flag_set ( inode , FI_DIRTY_INODE ) )
return 0 ;
spin_lock ( & sbi - > inode_lock [ DIRTY_META ] ) ;
clean = list_empty ( & F2FS_I ( inode ) - > gdirty_list ) ;
spin_unlock ( & sbi - > inode_lock [ DIRTY_META ] ) ;
if ( clean )
return 0 ;
inode = igrab ( inode ) ;
if ( ! inode )
return 0 ;
return 1 ;
}
static bool flush_dirty_inode ( struct page * page )
{
struct f2fs_sb_info * sbi = F2FS_P_SB ( page ) ;
struct inode * inode ;
nid_t ino = ino_of_node ( page ) ;
inode = find_inode_nowait ( sbi - > sb , ino , f2fs_match_ino , NULL ) ;
if ( ! inode )
return false ;
f2fs_update_inode ( inode , page ) ;
unlock_page ( page ) ;
iput ( inode ) ;
return true ;
}
2020-07-21 06:49:14 +03:00
void f2fs_flush_inline_data ( struct f2fs_sb_info * sbi )
2020-04-30 13:58:29 +03:00
{
pgoff_t index = 0 ;
struct pagevec pvec ;
int nr_pages ;
pagevec_init ( & pvec ) ;
while ( ( nr_pages = pagevec_lookup_tag ( & pvec ,
NODE_MAPPING ( sbi ) , & index , PAGECACHE_TAG_DIRTY ) ) ) {
int i ;
for ( i = 0 ; i < nr_pages ; i + + ) {
struct page * page = pvec . pages [ i ] ;
if ( ! IS_DNODE ( page ) )
continue ;
lock_page ( page ) ;
if ( unlikely ( page - > mapping ! = NODE_MAPPING ( sbi ) ) ) {
continue_unlock :
unlock_page ( page ) ;
continue ;
}
if ( ! PageDirty ( page ) ) {
/* someone wrote it for us */
goto continue_unlock ;
}
/* flush inline_data, if it's async context. */
2021-04-28 12:20:31 +03:00
if ( page_private_inline ( page ) ) {
clear_page_private_inline ( page ) ;
2020-04-30 13:58:29 +03:00
unlock_page ( page ) ;
flush_inline_data ( sbi , ino_of_node ( page ) ) ;
continue ;
}
unlock_page ( page ) ;
}
pagevec_release ( & pvec ) ;
cond_resched ( ) ;
}
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
int f2fs_sync_node_pages ( struct f2fs_sb_info * sbi ,
struct writeback_control * wbc ,
2017-08-02 18:21:48 +03:00
bool do_balance , enum iostat_type io_type )
2016-04-14 02:24:44 +03:00
{
2017-11-16 04:34:51 +03:00
pgoff_t index ;
2016-04-14 02:24:44 +03:00
struct pagevec pvec ;
int step = 0 ;
2016-03-12 02:33:22 +03:00
int nwritten = 0 ;
2016-09-29 13:50:10 +03:00
int ret = 0 ;
2018-06-04 18:20:36 +03:00
int nr_pages , done = 0 ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2017-11-16 04:37:52 +03:00
pagevec_init ( & pvec ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
next_step :
index = 0 ;
2017-11-16 04:34:51 +03:00
2018-06-04 18:20:36 +03:00
while ( ! done & & ( nr_pages = pagevec_lookup_tag ( & pvec ,
NODE_MAPPING ( sbi ) , & index , PAGECACHE_TAG_DIRTY ) ) ) {
2017-11-16 04:34:51 +03:00
int i ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
for ( i = 0 ; i < nr_pages ; i + + ) {
struct page * page = pvec . pages [ i ] ;
2017-02-04 04:44:04 +03:00
bool submitted = false ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2018-06-04 18:20:36 +03:00
/* give a priority to WB_SYNC threads */
if ( atomic_read ( & sbi - > wb_sync_req [ NODE ] ) & &
wbc - > sync_mode = = WB_SYNC_NONE ) {
done = 1 ;
break ;
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
/*
* flushing sequence with step :
* 0. indirect nodes
* 1. dentry dnodes
* 2. file dnodes
*/
if ( step = = 0 & & IS_DNODE ( page ) )
continue ;
if ( step = = 1 & & ( ! IS_DNODE ( page ) | |
is_cold_node ( page ) ) )
continue ;
if ( step = = 2 & & ( ! IS_DNODE ( page ) | |
! is_cold_node ( page ) ) )
continue ;
2016-02-22 13:35:46 +03:00
lock_node :
2018-07-04 13:04:10 +03:00
if ( wbc - > sync_mode = = WB_SYNC_ALL )
lock_page ( page ) ;
else if ( ! trylock_page ( page ) )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
continue ;
2014-01-21 13:51:16 +04:00
if ( unlikely ( page - > mapping ! = NODE_MAPPING ( sbi ) ) ) {
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
continue_unlock :
unlock_page ( page ) ;
continue ;
}
if ( ! PageDirty ( page ) ) {
/* someone wrote it for us */
goto continue_unlock ;
}
2020-07-16 19:57:03 +03:00
/* flush inline_data/inode, if it's async context. */
if ( ! do_balance )
goto write_node ;
/* flush inline_data */
2021-04-28 12:20:31 +03:00
if ( page_private_inline ( page ) ) {
clear_page_private_inline ( page ) ;
2016-01-25 16:57:05 +03:00
unlock_page ( page ) ;
flush_inline_data ( sbi , ino_of_node ( page ) ) ;
2016-02-22 13:35:46 +03:00
goto lock_node ;
f2fs: fix to writeout dirty inode during node flush
As Eric reported:
On xfstest generic/204 on f2fs, I'm getting a kernel BUG.
allocate_segment_by_default+0x9d/0x100 [f2fs]
f2fs_allocate_data_block+0x3c0/0x5c0 [f2fs]
do_write_page+0x62/0x110 [f2fs]
f2fs_do_write_node_page+0x2b/0xa0 [f2fs]
__write_node_page+0x2ec/0x590 [f2fs]
f2fs_sync_node_pages+0x756/0x7e0 [f2fs]
block_operations+0x25b/0x350 [f2fs]
f2fs_write_checkpoint+0x104/0x1150 [f2fs]
f2fs_sync_fs+0xa2/0x120 [f2fs]
f2fs_balance_fs_bg+0x33c/0x390 [f2fs]
f2fs_write_node_pages+0x4c/0x1f0 [f2fs]
do_writepages+0x1c/0x70
__writeback_single_inode+0x45/0x320
writeback_sb_inodes+0x273/0x5c0
wb_writeback+0xff/0x2e0
wb_workfn+0xa1/0x370
process_one_work+0x138/0x350
worker_thread+0x4d/0x3d0
kthread+0x109/0x140
The root cause of this issue is, in a very small partition, e.g.
in generic/204 testcase of fstest suit, filesystem's free space
is 50MB, so at most we can write 12800 inline inode with command:
`echo XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX > $SCRATCH_MNT/$i`,
then filesystem will have:
- 12800 dirty inline data page
- 12800 dirty inode page
- and 12800 dirty imeta (dirty inode)
When we flush node-inode's page cache, we can also flush inline
data with each inode page, however it will run out-of-free-space
in device, then once it triggers checkpoint, there is no room for
huge number of imeta, at this time, GC is useless, as there is no
dirty segment at all.
In order to fix this, we try to recognize inode page during
node_inode's page flushing, and update inode page from dirty inode,
so that later another imeta (dirty inode) flush can be avoided.
Reported-and-tested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-08-22 15:17:56 +03:00
}
/* flush dirty inode */
2022-06-11 20:55:43 +03:00
if ( IS_INODE ( page ) & & flush_dirty_inode ( page ) )
goto lock_node ;
2020-07-16 19:57:03 +03:00
write_node :
2018-12-25 12:43:42 +03:00
f2fs_wait_on_page_writeback ( page , NODE , true , true ) ;
2016-01-28 22:48:52 +03:00
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( ! clear_page_dirty_for_io ( page ) )
goto continue_unlock ;
2016-04-14 02:24:44 +03:00
set_fsync_mark ( page , 0 ) ;
set_dentry_mark ( page , 0 ) ;
2014-08-12 05:18:36 +04:00
2017-07-27 15:11:00 +03:00
ret = __write_node_page ( page , false , & submitted ,
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
wbc , do_balance , io_type , NULL ) ;
2017-02-04 04:44:04 +03:00
if ( ret )
2014-08-12 05:18:36 +04:00
unlock_page ( page ) ;
2017-02-04 04:44:04 +03:00
else if ( submitted )
2016-09-29 13:50:10 +03:00
nwritten + + ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( - - wbc - > nr_to_write = = 0 )
break ;
}
pagevec_release ( & pvec ) ;
cond_resched ( ) ;
if ( wbc - > nr_to_write = = 0 ) {
step = 2 ;
break ;
}
}
if ( step < 2 ) {
2019-08-29 05:58:26 +03:00
if ( ! is_sbi_flag_set ( sbi , SBI_CP_DISABLED ) & &
wbc - > sync_mode = = WB_SYNC_NONE & & step = = 1 )
2018-07-25 14:16:21 +03:00
goto out ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
step + + ;
goto next_step ;
}
2018-07-25 14:16:21 +03:00
out :
2016-09-29 13:50:10 +03:00
if ( nwritten )
2017-05-10 21:28:38 +03:00
f2fs_submit_merged_write ( sbi , NODE ) ;
2018-01-18 12:29:10 +03:00
if ( unlikely ( f2fs_cp_error ( sbi ) ) )
return - EIO ;
2016-09-29 13:50:10 +03:00
return ret ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
int f2fs_wait_on_node_pages_writeback ( struct f2fs_sb_info * sbi ,
unsigned int seq_id )
2013-10-31 09:57:01 +04:00
{
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
struct fsync_node_entry * fn ;
struct page * page ;
struct list_head * head = & sbi - > fsync_node_list ;
unsigned long flags ;
unsigned int cur_seq_id = 0 ;
2016-09-16 13:44:21 +03:00
int ret2 , ret = 0 ;
2013-10-31 09:57:01 +04:00
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
while ( seq_id & & cur_seq_id < seq_id ) {
spin_lock_irqsave ( & sbi - > fsync_node_lock , flags ) ;
if ( list_empty ( head ) ) {
spin_unlock_irqrestore ( & sbi - > fsync_node_lock , flags ) ;
break ;
}
fn = list_first_entry ( head , struct fsync_node_entry , list ) ;
if ( fn - > seq_id > seq_id ) {
spin_unlock_irqrestore ( & sbi - > fsync_node_lock , flags ) ;
break ;
}
cur_seq_id = fn - > seq_id ;
page = fn - > page ;
get_page ( page ) ;
spin_unlock_irqrestore ( & sbi - > fsync_node_lock , flags ) ;
2014-01-21 13:51:16 +04:00
2018-12-25 12:43:42 +03:00
f2fs_wait_on_page_writeback ( page , NODE , true , false ) ;
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
if ( TestClearPageError ( page ) )
ret = - EIO ;
2013-10-31 09:57:01 +04:00
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
put_page ( page ) ;
2013-10-31 09:57:01 +04:00
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
if ( ret )
break ;
2013-10-31 09:57:01 +04:00
}
2016-09-16 13:44:21 +03:00
ret2 = filemap_check_errors ( NODE_MAPPING ( sbi ) ) ;
2013-10-31 09:57:01 +04:00
if ( ! ret )
ret = ret2 ;
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
2013-10-31 09:57:01 +04:00
return ret ;
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
static int f2fs_write_node_pages ( struct address_space * mapping ,
struct writeback_control * wbc )
{
2014-09-03 02:31:18 +04:00
struct f2fs_sb_info * sbi = F2FS_M_SB ( mapping ) ;
2016-07-14 05:33:19 +03:00
struct blk_plug plug ;
2014-03-18 08:47:11 +04:00
long diff ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2017-06-29 18:20:45 +03:00
if ( unlikely ( is_sbi_flag_set ( sbi , SBI_POR_DOING ) ) )
goto skip_write ;
2013-10-24 09:19:18 +04:00
/* balancing f2fs's metadata in background */
2020-03-19 14:57:58 +03:00
f2fs_balance_fs_bg ( sbi , true ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2013-01-18 09:54:13 +04:00
/* collect a number of dirty node pages and write together */
2019-01-23 01:04:33 +03:00
if ( wbc - > sync_mode ! = WB_SYNC_ALL & &
get_pages ( sbi , F2FS_DIRTY_NODES ) <
nr_pages_to_skip ( sbi , NODE ) )
2014-03-18 08:43:05 +04:00
goto skip_write ;
2013-01-18 09:54:13 +04:00
2018-06-04 18:20:36 +03:00
if ( wbc - > sync_mode = = WB_SYNC_ALL )
atomic_inc ( & sbi - > wb_sync_req [ NODE ] ) ;
2022-01-27 08:44:49 +03:00
else if ( atomic_read ( & sbi - > wb_sync_req [ NODE ] ) ) {
/* to avoid potential deadlock */
if ( current - > plug )
blk_finish_plug ( current - > plug ) ;
2018-06-04 18:20:36 +03:00
goto skip_write ;
2022-01-27 08:44:49 +03:00
}
2018-06-04 18:20:36 +03:00
2016-02-04 11:14:00 +03:00
trace_f2fs_writepages ( mapping - > host , wbc , NODE ) ;
2014-03-18 08:47:11 +04:00
diff = nr_pages_to_write ( sbi , NODE , wbc ) ;
2016-07-14 05:33:19 +03:00
blk_start_plug ( & plug ) ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_sync_node_pages ( sbi , wbc , true , FS_NODE_IO ) ;
2016-07-14 05:33:19 +03:00
blk_finish_plug ( & plug ) ;
2014-03-18 08:47:11 +04:00
wbc - > nr_to_write = max ( ( long ) 0 , wbc - > nr_to_write - diff ) ;
2018-06-04 18:20:36 +03:00
if ( wbc - > sync_mode = = WB_SYNC_ALL )
atomic_dec ( & sbi - > wb_sync_req [ NODE ] ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
return 0 ;
2014-03-18 08:43:05 +04:00
skip_write :
wbc - > pages_skipped + = get_pages ( sbi , F2FS_DIRTY_NODES ) ;
2016-02-04 11:14:00 +03:00
trace_f2fs_writepages ( mapping - > host , wbc , NODE ) ;
2014-03-18 08:43:05 +04:00
return 0 ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2022-02-09 23:22:08 +03:00
static bool f2fs_dirty_node_folio ( struct address_space * mapping ,
struct folio * folio )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
2022-02-09 23:22:08 +03:00
trace_f2fs_set_page_dirty ( & folio - > page , NODE ) ;
2013-10-24 12:53:29 +04:00
2022-02-09 23:22:08 +03:00
if ( ! folio_test_uptodate ( folio ) )
folio_mark_uptodate ( folio ) ;
2018-03-09 18:10:21 +03:00
# ifdef CONFIG_F2FS_CHECK_FS
2022-02-09 23:22:08 +03:00
if ( IS_INODE ( & folio - > page ) )
2022-03-29 23:27:21 +03:00
f2fs_inode_chksum_set ( F2FS_M_SB ( mapping ) , & folio - > page ) ;
2018-03-09 18:10:21 +03:00
# endif
2022-08-31 05:24:40 +03:00
if ( filemap_dirty_folio ( mapping , folio ) ) {
2022-03-29 23:27:21 +03:00
inc_page_count ( F2FS_M_SB ( mapping ) , F2FS_DIRTY_NODES ) ;
2022-02-09 23:22:08 +03:00
set_page_private_reference ( & folio - > page ) ;
return true ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2022-02-09 23:22:08 +03:00
return false ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2012-11-29 08:28:09 +04:00
/*
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
* Structure of the f2fs node operations
*/
const struct address_space_operations f2fs_node_aops = {
. writepage = f2fs_write_node_page ,
. writepages = f2fs_write_node_pages ,
2022-02-09 23:22:08 +03:00
. dirty_folio = f2fs_dirty_node_folio ,
2022-02-09 23:21:44 +03:00
. invalidate_folio = f2fs_invalidate_folio ,
2022-05-01 06:41:46 +03:00
. release_folio = f2fs_release_folio ,
2022-06-06 17:47:21 +03:00
. migrate_folio = filemap_migrate_folio ,
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
} ;
2014-02-21 09:29:35 +04:00
static struct free_nid * __lookup_free_nid_list ( struct f2fs_nm_info * nm_i ,
nid_t n )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
2014-02-21 09:29:35 +04:00
return radix_tree_lookup ( & nm_i - > free_nid_root , n ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2017-09-29 08:59:35 +03:00
static int __insert_free_nid ( struct f2fs_sb_info * sbi ,
2020-06-28 16:48:13 +03:00
struct free_nid * i )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
2017-10-28 14:03:37 +03:00
int err = radix_tree_insert ( & nm_i - > free_nid_root , i - > nid , i ) ;
2021-04-06 04:47:35 +03:00
2017-10-28 14:03:37 +03:00
if ( err )
return err ;
2016-10-12 20:09:59 +03:00
2020-06-28 16:48:13 +03:00
nm_i - > nid_cnt [ FREE_NID ] + + ;
list_add_tail ( & i - > list , & nm_i - > free_nid_list ) ;
2016-10-12 20:09:59 +03:00
return 0 ;
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
}
2017-09-29 08:59:35 +03:00
static void __remove_free_nid ( struct f2fs_sb_info * sbi ,
2017-10-28 14:03:37 +03:00
struct free_nid * i , enum nid_state state )
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
2017-09-29 08:59:35 +03:00
f2fs_bug_on ( sbi , state ! = i - > state ) ;
nm_i - > nid_cnt [ state ] - - ;
if ( state = = FREE_NID )
list_del ( & i - > list ) ;
2017-10-28 14:03:37 +03:00
radix_tree_delete ( & nm_i - > free_nid_root , i - > nid ) ;
}
static void __move_free_nid ( struct f2fs_sb_info * sbi , struct free_nid * i ,
enum nid_state org_state , enum nid_state dst_state )
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
2017-10-28 14:03:37 +03:00
f2fs_bug_on ( sbi , org_state ! = i - > state ) ;
i - > state = dst_state ;
nm_i - > nid_cnt [ org_state ] - - ;
nm_i - > nid_cnt [ dst_state ] + + ;
switch ( dst_state ) {
case PREALLOC_NID :
list_del ( & i - > list ) ;
break ;
case FREE_NID :
list_add_tail ( & i - > list , & nm_i - > free_nid_list ) ;
break ;
default :
BUG_ON ( 1 ) ;
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2021-08-20 13:54:59 +03:00
bool f2fs_nat_bitmap_enabled ( struct f2fs_sb_info * sbi )
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
unsigned int i ;
bool ret = true ;
2022-01-07 23:48:44 +03:00
f2fs_down_read ( & nm_i - > nat_tree_lock ) ;
2021-08-20 13:54:59 +03:00
for ( i = 0 ; i < nm_i - > nat_blocks ; i + + ) {
if ( ! test_bit_le ( i , nm_i - > nat_block_bitmap ) ) {
ret = false ;
break ;
}
}
2022-01-07 23:48:44 +03:00
f2fs_up_read ( & nm_i - > nat_tree_lock ) ;
2021-08-20 13:54:59 +03:00
return ret ;
}
2017-11-22 11:07:23 +03:00
static void update_free_nid_bitmap ( struct f2fs_sb_info * sbi , nid_t nid ,
bool set , bool build )
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
unsigned int nat_ofs = NAT_BLOCK_OFFSET ( nid ) ;
unsigned int nid_ofs = nid - START_NID ( nid ) ;
if ( ! test_bit_le ( nat_ofs , nm_i - > nat_block_bitmap ) )
return ;
if ( set ) {
if ( test_bit_le ( nid_ofs , nm_i - > free_nid_bitmap [ nat_ofs ] ) )
return ;
__set_bit_le ( nid_ofs , nm_i - > free_nid_bitmap [ nat_ofs ] ) ;
nm_i - > free_nid_count [ nat_ofs ] + + ;
} else {
if ( ! test_bit_le ( nid_ofs , nm_i - > free_nid_bitmap [ nat_ofs ] ) )
return ;
__clear_bit_le ( nid_ofs , nm_i - > free_nid_bitmap [ nat_ofs ] ) ;
if ( ! build )
nm_i - > free_nid_count [ nat_ofs ] - - ;
}
}
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
/* return if the nid is recognized as free */
2017-11-22 11:07:23 +03:00
static bool add_free_nid ( struct f2fs_sb_info * sbi ,
nid_t nid , bool build , bool update )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
2014-04-16 05:47:06 +04:00
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
2017-03-22 09:45:05 +03:00
struct free_nid * i , * e ;
2013-05-07 15:47:40 +04:00
struct nat_entry * ne ;
2017-03-22 09:45:05 +03:00
int err = - EINVAL ;
bool ret = false ;
2013-04-25 08:21:12 +04:00
/* 0 nid should not be used */
2013-12-05 13:15:22 +04:00
if ( unlikely ( nid = = 0 ) )
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
return false ;
2013-05-07 15:47:40 +04:00
2019-04-15 10:28:36 +03:00
if ( unlikely ( f2fs_check_nid_range ( sbi , nid ) ) )
return false ;
2021-08-09 03:24:48 +03:00
i = f2fs_kmem_cache_alloc ( free_nid_slab , GFP_NOFS , true , NULL ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
i - > nid = nid ;
2017-09-29 08:59:35 +03:00
i - > state = FREE_NID ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2017-11-22 11:07:23 +03:00
radix_tree_preload ( GFP_NOFS | __GFP_NOFAIL ) ;
2014-12-04 07:47:26 +03:00
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
spin_lock ( & nm_i - > nid_list_lock ) ;
2017-03-22 09:45:05 +03:00
if ( build ) {
/*
* Thread A Thread B
* - f2fs_create
* - f2fs_new_inode
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
* - f2fs_alloc_nid
2017-09-29 08:59:35 +03:00
* - __insert_nid_to_list ( PREALLOC_NID )
2017-03-22 09:45:05 +03:00
* - f2fs_balance_fs_bg
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
* - f2fs_build_free_nids
* - __f2fs_build_free_nids
2017-03-22 09:45:05 +03:00
* - scan_nat_page
* - add_free_nid
* - __lookup_nat_cache
* - f2fs_add_link
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
* - f2fs_init_inode_metadata
* - f2fs_new_inode_page
* - f2fs_new_node_page
2017-03-22 09:45:05 +03:00
* - set_node_addr
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
* - f2fs_alloc_nid_done
2017-09-29 08:59:35 +03:00
* - __remove_nid_from_list ( PREALLOC_NID )
* - __insert_nid_to_list ( FREE_NID )
2017-03-22 09:45:05 +03:00
*/
ne = __lookup_nat_cache ( nm_i , nid ) ;
if ( ne & & ( ! get_nat_flag ( ne , IS_CHECKPOINTED ) | |
nat_get_blkaddr ( ne ) ! = NULL_ADDR ) )
goto err_out ;
e = __lookup_free_nid_list ( nm_i , nid ) ;
if ( e ) {
2017-09-29 08:59:35 +03:00
if ( e - > state = = FREE_NID )
2017-03-22 09:45:05 +03:00
ret = true ;
goto err_out ;
}
}
ret = true ;
2020-06-28 16:48:13 +03:00
err = __insert_free_nid ( sbi , i ) ;
2017-03-22 09:45:05 +03:00
err_out :
2017-11-22 11:07:23 +03:00
if ( update ) {
update_free_nid_bitmap ( sbi , nid , ret , build ) ;
if ( ! build )
nm_i - > available_nids + + ;
}
2016-10-12 20:09:59 +03:00
spin_unlock ( & nm_i - > nid_list_lock ) ;
radix_tree_preload_end ( ) ;
2017-11-22 11:07:23 +03:00
2017-03-22 09:45:05 +03:00
if ( err )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
kmem_cache_free ( free_nid_slab , i ) ;
2017-03-22 09:45:05 +03:00
return ret ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
static void remove_free_nid ( struct f2fs_sb_info * sbi , nid_t nid )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
struct free_nid * i ;
2014-04-02 04:55:00 +04:00
bool need_free = false ;
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
spin_lock ( & nm_i - > nid_list_lock ) ;
2014-02-21 09:29:35 +04:00
i = __lookup_free_nid_list ( nm_i , nid ) ;
2017-09-29 08:59:35 +03:00
if ( i & & i - > state = = FREE_NID ) {
2017-10-28 14:03:37 +03:00
__remove_free_nid ( sbi , i , FREE_NID ) ;
2014-04-02 04:55:00 +04:00
need_free = true ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
spin_unlock ( & nm_i - > nid_list_lock ) ;
2014-04-02 04:55:00 +04:00
if ( need_free )
kmem_cache_free ( free_nid_slab , i ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2018-06-15 09:45:57 +03:00
static int scan_nat_page ( struct f2fs_sb_info * sbi ,
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
struct page * nat_page , nid_t start_nid )
{
2014-04-16 05:47:06 +04:00
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
struct f2fs_nat_block * nat_blk = page_address ( nat_page ) ;
block_t blk_addr ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
unsigned int nat_ofs = NAT_BLOCK_OFFSET ( start_nid ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
int i ;
2017-03-08 01:11:06 +03:00
__set_bit_le ( nat_ofs , nm_i - > nat_block_bitmap ) ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
i = start_nid % NAT_ENTRY_PER_BLOCK ;
for ( ; i < NAT_ENTRY_PER_BLOCK ; i + + , start_nid + + ) {
2013-12-05 13:15:22 +04:00
if ( unlikely ( start_nid > = nm_i - > max_nid ) )
2013-03-16 03:34:37 +04:00
break ;
2013-05-06 19:15:43 +04:00
blk_addr = le32_to_cpu ( nat_blk - > entries [ i ] . block_addr ) ;
2018-06-15 09:45:57 +03:00
if ( blk_addr = = NEW_ADDR )
return - EINVAL ;
2017-11-22 11:07:23 +03:00
if ( blk_addr = = NULL_ADDR ) {
add_free_nid ( sbi , start_nid , true , true ) ;
} else {
spin_lock ( & NM_I ( sbi ) - > nid_list_lock ) ;
update_free_nid_bitmap ( sbi , start_nid , false , true ) ;
spin_unlock ( & NM_I ( sbi ) - > nid_list_lock ) ;
}
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
}
2018-06-15 09:45:57 +03:00
return 0 ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
}
2017-11-08 12:47:36 +03:00
static void scan_curseg_cache ( struct f2fs_sb_info * sbi )
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
{
struct curseg_info * curseg = CURSEG_I ( sbi , CURSEG_HOT_DATA ) ;
struct f2fs_journal * journal = curseg - > journal ;
2017-11-08 12:47:36 +03:00
int i ;
down_read ( & curseg - > journal_rwsem ) ;
for ( i = 0 ; i < nats_in_cursum ( journal ) ; i + + ) {
block_t addr ;
nid_t nid ;
addr = le32_to_cpu ( nat_in_journal ( journal , i ) . block_addr ) ;
nid = le32_to_cpu ( nid_in_journal ( journal , i ) ) ;
if ( addr = = NULL_ADDR )
2017-11-22 11:07:23 +03:00
add_free_nid ( sbi , nid , true , false ) ;
2017-11-08 12:47:36 +03:00
else
remove_free_nid ( sbi , nid ) ;
}
up_read ( & curseg - > journal_rwsem ) ;
}
static void scan_free_nid_bits ( struct f2fs_sb_info * sbi )
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
unsigned int i , idx ;
2017-11-07 14:14:24 +03:00
nid_t nid ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
2022-01-07 23:48:44 +03:00
f2fs_down_read ( & nm_i - > nat_tree_lock ) ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
for ( i = 0 ; i < nm_i - > nat_blocks ; i + + ) {
if ( ! test_bit_le ( i , nm_i - > nat_block_bitmap ) )
continue ;
2017-03-01 12:09:07 +03:00
if ( ! nm_i - > free_nid_count [ i ] )
continue ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
for ( idx = 0 ; idx < NAT_ENTRY_PER_BLOCK ; idx + + ) {
2017-11-07 14:14:24 +03:00
idx = find_next_bit_le ( nm_i - > free_nid_bitmap [ i ] ,
NAT_ENTRY_PER_BLOCK , idx ) ;
if ( idx > = NAT_ENTRY_PER_BLOCK )
break ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
nid = i * NAT_ENTRY_PER_BLOCK + idx ;
2017-11-22 11:07:23 +03:00
add_free_nid ( sbi , nid , true , false ) ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
2017-09-29 08:59:35 +03:00
if ( nm_i - > nid_cnt [ FREE_NID ] > = MAX_FREE_NIDS )
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
goto out ;
}
}
out :
2017-11-08 12:47:36 +03:00
scan_curseg_cache ( sbi ) ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
2022-01-07 23:48:44 +03:00
f2fs_up_read ( & nm_i - > nat_tree_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2018-06-15 09:45:57 +03:00
static int __f2fs_build_free_nids ( struct f2fs_sb_info * sbi ,
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
bool sync , bool mount )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
2018-06-15 09:45:57 +03:00
int i = 0 , ret ;
2013-04-25 11:05:51 +04:00
nid_t nid = nm_i - > next_scan_nid ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2017-04-26 10:56:52 +03:00
if ( unlikely ( nid > = nm_i - > max_nid ) )
nid = 0 ;
2020-08-18 13:10:14 +03:00
if ( unlikely ( nid % NAT_ENTRY_PER_BLOCK ) )
nid = NAT_BLOCK_OFFSET ( nid ) * NAT_ENTRY_PER_BLOCK ;
2013-04-25 11:05:51 +04:00
/* Enough entries */
2017-09-29 08:59:35 +03:00
if ( nm_i - > nid_cnt [ FREE_NID ] > = NAT_ENTRY_PER_BLOCK )
2018-06-15 09:45:57 +03:00
return 0 ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
if ( ! sync & & ! f2fs_available_free_memory ( sbi , FREE_NIDS ) )
2018-06-15 09:45:57 +03:00
return 0 ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
if ( ! mount ) {
/* try to find free nids in free_nid_bitmap */
scan_free_nid_bits ( sbi ) ;
2017-11-07 06:04:33 +03:00
if ( nm_i - > nid_cnt [ FREE_NID ] > = NAT_ENTRY_PER_BLOCK )
2018-06-15 09:45:57 +03:00
return 0 ;
2017-02-09 21:38:09 +03:00
}
2013-04-25 11:05:51 +04:00
/* readahead nat pages to be scanned */
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_ra_meta_pages ( sbi , NAT_BLOCK_OFFSET ( nid ) , FREE_NID_PAGES ,
2015-10-12 12:05:59 +03:00
META_NAT , true ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2022-01-07 23:48:44 +03:00
f2fs_down_read ( & nm_i - > nat_tree_lock ) ;
2016-01-02 20:19:41 +03:00
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
while ( 1 ) {
2017-11-17 11:13:38 +03:00
if ( ! test_bit_le ( NAT_BLOCK_OFFSET ( nid ) ,
nm_i - > nat_block_bitmap ) ) {
struct page * page = get_current_nat_page ( sbi , nid ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2018-09-18 03:36:06 +03:00
if ( IS_ERR ( page ) ) {
ret = PTR_ERR ( page ) ;
} else {
ret = scan_nat_page ( sbi , page , nid ) ;
f2fs_put_page ( page , 1 ) ;
}
2018-06-15 09:45:57 +03:00
if ( ret ) {
2022-01-07 23:48:44 +03:00
f2fs_up_read ( & nm_i - > nat_tree_lock ) ;
2019-06-18 12:48:42 +03:00
f2fs_err ( sbi , " NAT is corrupt, run fsck to fix it " ) ;
2018-09-18 03:36:06 +03:00
return ret ;
2018-06-15 09:45:57 +03:00
}
2017-11-17 11:13:38 +03:00
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
nid + = ( NAT_ENTRY_PER_BLOCK - ( nid % NAT_ENTRY_PER_BLOCK ) ) ;
2013-12-05 13:15:22 +04:00
if ( unlikely ( nid > = nm_i - > max_nid ) )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
nid = 0 ;
2013-04-25 11:05:51 +04:00
2015-07-24 13:26:26 +03:00
if ( + + i > = FREE_NID_PAGES )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
break ;
}
2013-04-25 11:05:51 +04:00
/* go to the next free nat pages to find free nids abundantly */
nm_i - > next_scan_nid = nid ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
/* find free nids from current sum_pages */
2017-11-08 12:47:36 +03:00
scan_curseg_cache ( sbi ) ;
2016-02-14 13:50:40 +03:00
2022-01-07 23:48:44 +03:00
f2fs_up_read ( & nm_i - > nat_tree_lock ) ;
2015-10-12 12:07:33 +03:00
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_ra_meta_pages ( sbi , NAT_BLOCK_OFFSET ( nm_i - > next_scan_nid ) ,
2015-10-12 12:08:48 +03:00
nm_i - > ra_nid_pages , META_NAT , false ) ;
2018-06-15 09:45:57 +03:00
return 0 ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2018-06-15 09:45:57 +03:00
int f2fs_build_free_nids ( struct f2fs_sb_info * sbi , bool sync , bool mount )
2016-10-11 17:31:34 +03:00
{
2018-06-15 09:45:57 +03:00
int ret ;
2016-10-11 17:31:34 +03:00
mutex_lock ( & NM_I ( sbi ) - > build_lock ) ;
2018-06-15 09:45:57 +03:00
ret = __f2fs_build_free_nids ( sbi , sync , mount ) ;
2016-10-11 17:31:34 +03:00
mutex_unlock ( & NM_I ( sbi ) - > build_lock ) ;
2018-06-15 09:45:57 +03:00
return ret ;
2016-10-11 17:31:34 +03:00
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
/*
* If this function returns success , caller can obtain a new nid
* from second parameter of this function .
* The returned nid could be used ino as well as nid when inode is created .
*/
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
bool f2fs_alloc_nid ( struct f2fs_sb_info * sbi , nid_t * nid )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
struct free_nid * i = NULL ;
retry :
2017-02-25 06:08:28 +03:00
if ( time_to_inject ( sbi , FAULT_ALLOC_NID ) ) {
2019-11-01 12:53:23 +03:00
f2fs_show_injection_info ( sbi , FAULT_ALLOC_NID ) ;
2016-04-30 02:29:22 +03:00
return false ;
2017-02-25 06:08:28 +03:00
}
2018-08-14 00:38:06 +03:00
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
spin_lock ( & nm_i - > nid_list_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2016-11-17 15:53:11 +03:00
if ( unlikely ( nm_i - > available_nids = = 0 ) ) {
spin_unlock ( & nm_i - > nid_list_lock ) ;
return false ;
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
/* We should not use stale free nids created by f2fs_build_free_nids */
if ( nm_i - > nid_cnt [ FREE_NID ] & & ! on_f2fs_build_free_nids ( nm_i ) ) {
2017-09-29 08:59:35 +03:00
f2fs_bug_on ( sbi , list_empty ( & nm_i - > free_nid_list ) ) ;
i = list_first_entry ( & nm_i - > free_nid_list ,
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
struct free_nid , list ) ;
2013-04-25 11:05:51 +04:00
* nid = i - > nid ;
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
2017-10-28 14:03:37 +03:00
__move_free_nid ( sbi , i , FREE_NID , PREALLOC_NID ) ;
2016-11-17 15:53:11 +03:00
nm_i - > available_nids - - ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
2017-03-13 15:10:41 +03:00
update_free_nid_bitmap ( sbi , * nid , false , false ) ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
spin_unlock ( & nm_i - > nid_list_lock ) ;
2013-04-25 11:05:51 +04:00
return true ;
}
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
spin_unlock ( & nm_i - > nid_list_lock ) ;
2013-04-25 11:05:51 +04:00
/* Let's scan nat pages and its caches to get free nids */
2018-09-20 01:45:19 +03:00
if ( ! f2fs_build_free_nids ( sbi , true , false ) )
goto retry ;
return false ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2012-11-29 08:28:09 +04:00
/*
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
* f2fs_alloc_nid ( ) should be called prior to this function .
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
*/
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
void f2fs_alloc_nid_done ( struct f2fs_sb_info * sbi , nid_t nid )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
struct free_nid * i ;
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
spin_lock ( & nm_i - > nid_list_lock ) ;
2014-02-21 09:29:35 +04:00
i = __lookup_free_nid_list ( nm_i , nid ) ;
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
f2fs_bug_on ( sbi , ! i ) ;
2017-10-28 14:03:37 +03:00
__remove_free_nid ( sbi , i , PREALLOC_NID ) ;
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
spin_unlock ( & nm_i - > nid_list_lock ) ;
2014-04-02 04:55:00 +04:00
kmem_cache_free ( free_nid_slab , i ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2012-11-29 08:28:09 +04:00
/*
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
* f2fs_alloc_nid ( ) should be called prior to this function .
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
*/
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
void f2fs_alloc_nid_failed ( struct f2fs_sb_info * sbi , nid_t nid )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
2013-04-03 17:19:03 +04:00
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
struct free_nid * i ;
2014-04-02 04:55:00 +04:00
bool need_free = false ;
2013-04-03 17:19:03 +04:00
2013-08-14 16:57:27 +04:00
if ( ! nid )
return ;
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
spin_lock ( & nm_i - > nid_list_lock ) ;
2014-02-21 09:29:35 +04:00
i = __lookup_free_nid_list ( nm_i , nid ) ;
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
f2fs_bug_on ( sbi , ! i ) ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
if ( ! f2fs_available_free_memory ( sbi , FREE_NIDS ) ) {
2017-10-28 14:03:37 +03:00
__remove_free_nid ( sbi , i , PREALLOC_NID ) ;
2014-04-02 04:55:00 +04:00
need_free = true ;
2013-05-06 19:15:41 +04:00
} else {
2017-10-28 14:03:37 +03:00
__move_free_nid ( sbi , i , PREALLOC_NID , FREE_NID ) ;
2013-05-06 19:15:41 +04:00
}
2016-11-17 15:53:11 +03:00
nm_i - > available_nids + + ;
2017-03-13 15:10:41 +03:00
update_free_nid_bitmap ( sbi , nid , true , false ) ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
spin_unlock ( & nm_i - > nid_list_lock ) ;
2014-04-02 04:55:00 +04:00
if ( need_free )
kmem_cache_free ( free_nid_slab , i ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
int f2fs_try_to_free_nids ( struct f2fs_sb_info * sbi , int nr_shrink )
2015-07-28 13:33:46 +03:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
int nr = nr_shrink ;
2017-09-29 08:59:35 +03:00
if ( nm_i - > nid_cnt [ FREE_NID ] < = MAX_FREE_NIDS )
2016-06-17 02:41:49 +03:00
return 0 ;
2015-07-28 13:33:46 +03:00
if ( ! mutex_trylock ( & nm_i - > build_lock ) )
return 0 ;
2020-05-08 12:50:20 +03:00
while ( nr_shrink & & nm_i - > nid_cnt [ FREE_NID ] > MAX_FREE_NIDS ) {
struct free_nid * i , * next ;
unsigned int batch = SHRINK_NID_BATCH_SIZE ;
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
2020-05-08 12:50:20 +03:00
spin_lock ( & nm_i - > nid_list_lock ) ;
list_for_each_entry_safe ( i , next , & nm_i - > free_nid_list , list ) {
if ( ! nr_shrink | | ! batch | |
nm_i - > nid_cnt [ FREE_NID ] < = MAX_FREE_NIDS )
break ;
__remove_free_nid ( sbi , i , FREE_NID ) ;
kmem_cache_free ( free_nid_slab , i ) ;
nr_shrink - - ;
batch - - ;
}
spin_unlock ( & nm_i - > nid_list_lock ) ;
2015-07-28 13:33:46 +03:00
}
2020-05-08 12:50:20 +03:00
2015-07-28 13:33:46 +03:00
mutex_unlock ( & nm_i - > build_lock ) ;
return nr - nr_shrink ;
}
2020-07-06 13:23:36 +03:00
int f2fs_recover_inline_xattr ( struct inode * inode , struct page * page )
2014-03-11 09:37:38 +04:00
{
void * src_addr , * dst_addr ;
size_t inline_size ;
struct page * ipage ;
struct f2fs_inode * ri ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
ipage = f2fs_get_node_page ( F2FS_I_SB ( inode ) , inode - > i_ino ) ;
2020-07-06 13:23:36 +03:00
if ( IS_ERR ( ipage ) )
return PTR_ERR ( ipage ) ;
2014-03-11 09:37:38 +04:00
2014-08-08 10:45:42 +04:00
ri = F2FS_INODE ( page ) ;
2018-01-03 13:03:04 +03:00
if ( ri - > i_inline & F2FS_INLINE_XATTR ) {
2020-12-07 12:54:41 +03:00
if ( ! f2fs_has_inline_xattr ( inode ) ) {
set_inode_flag ( inode , FI_INLINE_XATTR ) ;
stat_inc_inline_xattr ( inode ) ;
}
2018-01-03 13:03:04 +03:00
} else {
2020-12-07 12:54:41 +03:00
if ( f2fs_has_inline_xattr ( inode ) ) {
stat_dec_inline_xattr ( inode ) ;
clear_inode_flag ( inode , FI_INLINE_XATTR ) ;
}
2014-08-08 10:45:42 +04:00
goto update_inode ;
}
f2fs: support flexible inline xattr size
Now, in product, more and more features based on file encryption were
introduced, their demand of xattr space is increasing, however, inline
xattr has fixed-size of 200 bytes, once inline xattr space is full, new
increased xattr data would occupy additional xattr block which may bring
us more space usage and performance regression during persisting.
In order to resolve above issue, it's better to expand inline xattr size
flexibly according to user's requirement.
So this patch introduces new filesystem feature 'flexible inline xattr',
and new mount option 'inline_xattr_size=%u', once mkfs enables the
feature, we can use the option to make f2fs supporting flexible inline
xattr size.
To support this feature, we add extra attribute i_inline_xattr_size in
inode layout, indicating that how many space inline xattr borrows from
block address mapping space in inode layout, by this, we can easily
locate and store flexible-sized inline xattr data in inode.
Inode disk layout:
+----------------------+
| .i_mode |
| ... |
| .i_ext |
+----------------------+
| .i_extra_isize |
| .i_inline_xattr_size |-----------+
| ... | |
+----------------------+ |
| .i_addr | |
| - block address or | |
| - inline data | |
+----------------------+<---+ v
| inline xattr | +---inline xattr range
+----------------------+<---+
| .i_nid |
+----------------------+
| node_footer |
| (nid, ino, offset) |
+----------------------+
Note that, we have to cnosider backward compatibility which reserved
inline_data space, 200 bytes, all the time, reported by Sheng Yong.
Previous inline data or directory always reserved 200 bytes in inode layout,
even if inline_xattr is disabled. In order to keep inline_dentry's structure
for backward compatibility, we get the space back only from inline_data.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reported-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 16:59:50 +03:00
dst_addr = inline_xattr_addr ( inode , ipage ) ;
src_addr = inline_xattr_addr ( inode , page ) ;
2014-03-11 09:37:38 +04:00
inline_size = inline_xattr_size ( inode ) ;
2018-12-25 12:43:42 +03:00
f2fs_wait_on_page_writeback ( ipage , NODE , true , true ) ;
2014-03-11 09:37:38 +04:00
memcpy ( dst_addr , src_addr , inline_size ) ;
2014-08-08 10:45:42 +04:00
update_inode :
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_update_inode ( inode , ipage ) ;
2014-03-11 09:37:38 +04:00
f2fs_put_page ( ipage , 1 ) ;
2020-07-06 13:23:36 +03:00
return 0 ;
2014-03-11 09:37:38 +04:00
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
int f2fs_recover_xattr_data ( struct inode * inode , struct page * page )
2014-01-28 07:25:06 +04:00
{
2014-09-03 02:31:18 +04:00
struct f2fs_sb_info * sbi = F2FS_I_SB ( inode ) ;
2014-01-28 07:25:06 +04:00
nid_t prev_xnid = F2FS_I ( inode ) - > i_xattr_nid ;
2017-07-18 04:48:12 +03:00
nid_t new_xnid ;
struct dnode_of_data dn ;
2014-01-28 07:25:06 +04:00
struct node_info ni ;
f2fs: change recovery policy of xattr node block
Currently, if we call fsync after updating the xattr date belongs to the
file, f2fs needs to trigger checkpoint to keep xattr data consistent. But,
this policy cause low performance as checkpoint will block most foreground
operations and cause unneeded and unrelated IOs around checkpoint.
This patch will reuse regular file recovery policy for xattr node block,
so, we change to write xattr node block tagged with fsync flag to warm
area instead of cold area, and during recovery, we search warm node chain
for fsynced xattr block, and do the recovery.
So, for below application IO pattern, performance can be improved
obviously:
- touch file
- create/update/delete xattr entry in file
- fsync file
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-08 12:39:45 +03:00
struct page * xpage ;
2018-07-16 19:02:17 +03:00
int err ;
2014-01-28 07:25:06 +04:00
if ( ! prev_xnid )
goto recover_xnid ;
f2fs: change recovery policy of xattr node block
Currently, if we call fsync after updating the xattr date belongs to the
file, f2fs needs to trigger checkpoint to keep xattr data consistent. But,
this policy cause low performance as checkpoint will block most foreground
operations and cause unneeded and unrelated IOs around checkpoint.
This patch will reuse regular file recovery policy for xattr node block,
so, we change to write xattr node block tagged with fsync flag to warm
area instead of cold area, and during recovery, we search warm node chain
for fsynced xattr block, and do the recovery.
So, for below application IO pattern, performance can be improved
obviously:
- touch file
- create/update/delete xattr entry in file
- fsync file
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-08 12:39:45 +03:00
/* 1: invalidate the previous xattr nid */
2021-12-14 01:16:32 +03:00
err = f2fs_get_node_info ( sbi , prev_xnid , & ni , false ) ;
2018-07-16 19:02:17 +03:00
if ( err )
return err ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_invalidate_blocks ( sbi , ni . blk_addr ) ;
f2fs: don't count inode block in in-memory inode.i_blocks
Previously, we count all inode consumed blocks including inode block,
xattr block, index block, data block into i_blocks, for other generic
filesystems, they won't count inode block into i_blocks, so for
userspace applications or quota system, they may detect incorrect block
count according to i_blocks value in inode.
This patch changes to count all blocks into inode.i_blocks excluding
inode block, for on-disk i_blocks, we keep counting inode block for
backward compatibility.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-05 20:11:31 +03:00
dec_valid_node_count ( sbi , inode , false ) ;
2014-03-20 16:52:53 +04:00
set_node_addr ( sbi , & ni , NULL_ADDR , false ) ;
2014-01-28 07:25:06 +04:00
recover_xnid :
f2fs: change recovery policy of xattr node block
Currently, if we call fsync after updating the xattr date belongs to the
file, f2fs needs to trigger checkpoint to keep xattr data consistent. But,
this policy cause low performance as checkpoint will block most foreground
operations and cause unneeded and unrelated IOs around checkpoint.
This patch will reuse regular file recovery policy for xattr node block,
so, we change to write xattr node block tagged with fsync flag to warm
area instead of cold area, and during recovery, we search warm node chain
for fsynced xattr block, and do the recovery.
So, for below application IO pattern, performance can be improved
obviously:
- touch file
- create/update/delete xattr entry in file
- fsync file
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-08 12:39:45 +03:00
/* 2: update xattr nid in inode */
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
if ( ! f2fs_alloc_nid ( sbi , & new_xnid ) )
2017-07-18 04:48:12 +03:00
return - ENOSPC ;
set_new_dnode ( & dn , inode , NULL , NULL , new_xnid ) ;
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
xpage = f2fs_new_node_page ( & dn , XATTR_NODE_OFFSET ) ;
2017-07-18 04:48:12 +03:00
if ( IS_ERR ( xpage ) ) {
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_alloc_nid_failed ( sbi , new_xnid ) ;
2017-07-18 04:48:12 +03:00
return PTR_ERR ( xpage ) ;
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_alloc_nid_done ( sbi , new_xnid ) ;
f2fs_update_inode_page ( inode ) ;
f2fs: change recovery policy of xattr node block
Currently, if we call fsync after updating the xattr date belongs to the
file, f2fs needs to trigger checkpoint to keep xattr data consistent. But,
this policy cause low performance as checkpoint will block most foreground
operations and cause unneeded and unrelated IOs around checkpoint.
This patch will reuse regular file recovery policy for xattr node block,
so, we change to write xattr node block tagged with fsync flag to warm
area instead of cold area, and during recovery, we search warm node chain
for fsynced xattr block, and do the recovery.
So, for below application IO pattern, performance can be improved
obviously:
- touch file
- create/update/delete xattr entry in file
- fsync file
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-08 12:39:45 +03:00
/* 3: update and set xattr node page dirty */
2017-07-18 04:48:12 +03:00
memcpy ( F2FS_NODE ( xpage ) , F2FS_NODE ( page ) , VALID_XATTR_BLOCK_SIZE ) ;
2014-01-28 07:25:06 +04:00
f2fs: change recovery policy of xattr node block
Currently, if we call fsync after updating the xattr date belongs to the
file, f2fs needs to trigger checkpoint to keep xattr data consistent. But,
this policy cause low performance as checkpoint will block most foreground
operations and cause unneeded and unrelated IOs around checkpoint.
This patch will reuse regular file recovery policy for xattr node block,
so, we change to write xattr node block tagged with fsync flag to warm
area instead of cold area, and during recovery, we search warm node chain
for fsynced xattr block, and do the recovery.
So, for below application IO pattern, performance can be improved
obviously:
- touch file
- create/update/delete xattr entry in file
- fsync file
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-08 12:39:45 +03:00
set_page_dirty ( xpage ) ;
f2fs_put_page ( xpage , 1 ) ;
2014-01-28 07:25:06 +04:00
f2fs: change recovery policy of xattr node block
Currently, if we call fsync after updating the xattr date belongs to the
file, f2fs needs to trigger checkpoint to keep xattr data consistent. But,
this policy cause low performance as checkpoint will block most foreground
operations and cause unneeded and unrelated IOs around checkpoint.
This patch will reuse regular file recovery policy for xattr node block,
so, we change to write xattr node block tagged with fsync flag to warm
area instead of cold area, and during recovery, we search warm node chain
for fsynced xattr block, and do the recovery.
So, for below application IO pattern, performance can be improved
obviously:
- touch file
- create/update/delete xattr entry in file
- fsync file
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-08 12:39:45 +03:00
return 0 ;
2014-01-28 07:25:06 +04:00
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
int f2fs_recover_inode_page ( struct f2fs_sb_info * sbi , struct page * page )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
2013-12-26 11:30:41 +04:00
struct f2fs_inode * src , * dst ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
nid_t ino = ino_of_node ( page ) ;
struct node_info old_ni , new_ni ;
struct page * ipage ;
2018-07-16 19:02:17 +03:00
int err ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2021-12-14 01:16:32 +03:00
err = f2fs_get_node_info ( sbi , ino , & old_ni , false ) ;
2018-07-16 19:02:17 +03:00
if ( err )
return err ;
2014-04-18 10:21:04 +04:00
if ( unlikely ( old_ni . blk_addr ! = NULL_ADDR ) )
return - EINVAL ;
2016-09-10 02:59:39 +03:00
retry :
2016-04-30 02:11:53 +03:00
ipage = f2fs_grab_cache_page ( NODE_MAPPING ( sbi ) , ino , false ) ;
2016-09-10 02:59:39 +03:00
if ( ! ipage ) {
mm: introduce memalloc_retry_wait()
Various places in the kernel - largely in filesystems - respond to a
memory allocation failure by looping around and re-trying. Some of
these cannot conveniently use __GFP_NOFAIL, for reasons such as:
- a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on
- a need to check for the process being signalled between failures
- the possibility that other recovery actions could be performed
- the allocation is quite deep in support code, and passing down an
extra flag to say if __GFP_NOFAIL is wanted would be clumsy.
Many of these currently use congestion_wait() which (in almost all
cases) simply waits the given timeout - congestion isn't tracked for
most devices.
It isn't clear what the best delay is for loops, but it is clear that
the various filesystems shouldn't be responsible for choosing a timeout.
This patch introduces memalloc_retry_wait() with takes on that
responsibility. Code that wants to retry a memory allocation can call
this function passing the GFP flags that were used. It will wait
however is appropriate.
For now, it only considers __GFP_NORETRY and whatever
gfpflags_allow_blocking() tests. If blocking is allowed without
__GFP_NORETRY, then alloc_page either made some reclaim progress, or
waited for a while, before failing. So there is no need for much
further waiting. memalloc_retry_wait() will wait until the current
jiffie ends. If this condition is not met, then alloc_page() won't have
waited much if at all. In that case memalloc_retry_wait() waits about
200ms. This is the delay that most current loops uses.
linux/sched/mm.h needs to be included in some files now,
but linux/backing-dev.h does not.
Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 01:07:14 +03:00
memalloc_retry_wait ( GFP_NOFS ) ;
2016-09-10 02:59:39 +03:00
goto retry ;
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2014-08-06 18:22:50 +04:00
/* Should not use this inode from free nid list */
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
remove_free_nid ( sbi , ino ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2016-07-01 04:49:15 +03:00
if ( ! PageUptodate ( ipage ) )
SetPageUptodate ( ipage ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
fill_node_footer ( ipage , ino , ino , 0 , true ) ;
2018-10-03 17:32:44 +03:00
set_cold_node ( ipage , false ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2013-12-26 11:30:41 +04:00
src = F2FS_INODE ( page ) ;
dst = F2FS_INODE ( ipage ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2020-12-22 16:34:15 +03:00
memcpy ( dst , src , offsetof ( struct f2fs_inode , i_ext ) ) ;
2013-12-26 11:30:41 +04:00
dst - > i_size = 0 ;
dst - > i_blocks = cpu_to_le64 ( 1 ) ;
dst - > i_links = cpu_to_le32 ( 1 ) ;
dst - > i_xattr_nid = 0 ;
2017-07-18 19:19:06 +03:00
dst - > i_inline = src - > i_inline & ( F2FS_INLINE_XATTR | F2FS_EXTRA_ATTR ) ;
2017-07-25 19:01:41 +03:00
if ( dst - > i_inline & F2FS_EXTRA_ATTR ) {
2017-07-18 19:19:06 +03:00
dst - > i_extra_isize = src - > i_extra_isize ;
f2fs: support flexible inline xattr size
Now, in product, more and more features based on file encryption were
introduced, their demand of xattr space is increasing, however, inline
xattr has fixed-size of 200 bytes, once inline xattr space is full, new
increased xattr data would occupy additional xattr block which may bring
us more space usage and performance regression during persisting.
In order to resolve above issue, it's better to expand inline xattr size
flexibly according to user's requirement.
So this patch introduces new filesystem feature 'flexible inline xattr',
and new mount option 'inline_xattr_size=%u', once mkfs enables the
feature, we can use the option to make f2fs supporting flexible inline
xattr size.
To support this feature, we add extra attribute i_inline_xattr_size in
inode layout, indicating that how many space inline xattr borrows from
block address mapping space in inode layout, by this, we can easily
locate and store flexible-sized inline xattr data in inode.
Inode disk layout:
+----------------------+
| .i_mode |
| ... |
| .i_ext |
+----------------------+
| .i_extra_isize |
| .i_inline_xattr_size |-----------+
| ... | |
+----------------------+ |
| .i_addr | |
| - block address or | |
| - inline data | |
+----------------------+<---+ v
| inline xattr | +---inline xattr range
+----------------------+<---+
| .i_nid |
+----------------------+
| node_footer |
| (nid, ino, offset) |
+----------------------+
Note that, we have to cnosider backward compatibility which reserved
inline_data space, 200 bytes, all the time, reported by Sheng Yong.
Previous inline data or directory always reserved 200 bytes in inode layout,
even if inline_xattr is disabled. In order to keep inline_dentry's structure
for backward compatibility, we get the space back only from inline_data.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reported-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 16:59:50 +03:00
2018-10-24 13:34:26 +03:00
if ( f2fs_sb_has_flexible_inline_xattr ( sbi ) & &
f2fs: support flexible inline xattr size
Now, in product, more and more features based on file encryption were
introduced, their demand of xattr space is increasing, however, inline
xattr has fixed-size of 200 bytes, once inline xattr space is full, new
increased xattr data would occupy additional xattr block which may bring
us more space usage and performance regression during persisting.
In order to resolve above issue, it's better to expand inline xattr size
flexibly according to user's requirement.
So this patch introduces new filesystem feature 'flexible inline xattr',
and new mount option 'inline_xattr_size=%u', once mkfs enables the
feature, we can use the option to make f2fs supporting flexible inline
xattr size.
To support this feature, we add extra attribute i_inline_xattr_size in
inode layout, indicating that how many space inline xattr borrows from
block address mapping space in inode layout, by this, we can easily
locate and store flexible-sized inline xattr data in inode.
Inode disk layout:
+----------------------+
| .i_mode |
| ... |
| .i_ext |
+----------------------+
| .i_extra_isize |
| .i_inline_xattr_size |-----------+
| ... | |
+----------------------+ |
| .i_addr | |
| - block address or | |
| - inline data | |
+----------------------+<---+ v
| inline xattr | +---inline xattr range
+----------------------+<---+
| .i_nid |
+----------------------+
| node_footer |
| (nid, ino, offset) |
+----------------------+
Note that, we have to cnosider backward compatibility which reserved
inline_data space, 200 bytes, all the time, reported by Sheng Yong.
Previous inline data or directory always reserved 200 bytes in inode layout,
even if inline_xattr is disabled. In order to keep inline_dentry's structure
for backward compatibility, we get the space back only from inline_data.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reported-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 16:59:50 +03:00
F2FS_FITS_IN_INODE ( src , le16_to_cpu ( src - > i_extra_isize ) ,
i_inline_xattr_size ) )
dst - > i_inline_xattr_size = src - > i_inline_xattr_size ;
2018-10-24 13:34:26 +03:00
if ( f2fs_sb_has_project_quota ( sbi ) & &
2017-07-25 19:01:41 +03:00
F2FS_FITS_IN_INODE ( src , le16_to_cpu ( src - > i_extra_isize ) ,
i_projid ) )
dst - > i_projid = src - > i_projid ;
2018-09-25 10:36:01 +03:00
2018-10-24 13:34:26 +03:00
if ( f2fs_sb_has_inode_crtime ( sbi ) & &
2018-09-25 10:36:01 +03:00
F2FS_FITS_IN_INODE ( src , le16_to_cpu ( src - > i_extra_isize ) ,
i_crtime_nsec ) ) {
dst - > i_crtime = src - > i_crtime ;
dst - > i_crtime_nsec = src - > i_crtime_nsec ;
}
2017-07-25 19:01:41 +03:00
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
new_ni = old_ni ;
new_ni . ino = ino ;
2017-07-08 19:13:07 +03:00
if ( unlikely ( inc_valid_node_count ( sbi , NULL , true ) ) )
2013-05-14 10:47:43 +04:00
WARN_ON ( 1 ) ;
2014-03-20 16:52:53 +04:00
set_node_addr ( sbi , & new_ni , NEW_ADDR , false ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
inc_valid_inode_count ( sbi ) ;
2014-08-08 04:04:24 +04:00
set_page_dirty ( ipage ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
f2fs_put_page ( ipage , 1 ) ;
return 0 ;
}
2018-07-16 19:02:17 +03:00
int f2fs_restore_node_summary ( struct f2fs_sb_info * sbi ,
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
unsigned int segno , struct f2fs_summary_block * sum )
{
struct f2fs_node * rn ;
struct f2fs_summary * sum_entry ;
block_t addr ;
2014-12-18 13:29:05 +03:00
int i , idx , last_offset , nrpages ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
/* scan the node segment */
last_offset = sbi - > blocks_per_seg ;
addr = START_BLOCK ( sbi , segno ) ;
sum_entry = & sum - > entries [ 0 ] ;
2014-12-18 13:29:05 +03:00
for ( i = 0 ; i < last_offset ; i + = nrpages , addr + = nrpages ) {
2021-01-29 07:38:57 +03:00
nrpages = bio_max_segs ( last_offset - i ) ;
2013-03-08 16:29:23 +04:00
2014-08-06 18:22:50 +04:00
/* readahead node pages */
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
f2fs_ra_meta_pages ( sbi , addr , nrpages , META_POR , true ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2014-12-18 13:29:05 +03:00
for ( idx = addr ; idx < addr + nrpages ; idx + + ) {
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
struct page * page = f2fs_get_tmp_page ( sbi , idx ) ;
2013-11-22 11:48:54 +04:00
2018-07-16 19:02:17 +03:00
if ( IS_ERR ( page ) )
return PTR_ERR ( page ) ;
2014-12-18 13:29:05 +03:00
rn = F2FS_NODE ( page ) ;
sum_entry - > nid = rn - > footer . nid ;
sum_entry - > version = 0 ;
sum_entry - > ofs_in_node = 0 ;
sum_entry + + ;
f2fs_put_page ( page , 1 ) ;
2013-11-22 11:48:54 +04:00
}
2014-05-27 04:41:07 +04:00
2014-12-18 13:29:05 +03:00
invalidate_mapping_pages ( META_MAPPING ( sbi ) , addr ,
2014-05-27 04:41:07 +04:00
addr + nrpages ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2018-07-16 19:02:17 +03:00
return 0 ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
static void remove_nats_in_journal ( struct f2fs_sb_info * sbi )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
struct curseg_info * curseg = CURSEG_I ( sbi , CURSEG_HOT_DATA ) ;
f2fs: split journal cache from curseg cache
In curseg cache, f2fs caches two different parts:
- datas of current summay block, i.e. summary entries, footer info.
- journal info, i.e. sparse nat/sit entries or io stat info.
With this approach, 1) it may cause higher lock contention when we access
or update both of the parts of cache since we use the same mutex lock
curseg_mutex to protect the cache. 2) current summary block with last
journal info will be writebacked into device as a normal summary block
when flushing, however, we treat journal info as valid one only in current
summary, so most normal summary blocks contain junk journal data, it wastes
remaining space of summary block.
So, in order to fix above issues, we split curseg cache into two parts:
a) current summary block, protected by original mutex lock curseg_mutex
b) journal cache, protected by newly introduced r/w semaphore journal_rwsem
When loading curseg cache during ->mount, we store summary info and
journal info into different caches; When doing checkpoint, we combine
datas of two cache into current summary block for persisting.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-19 13:08:46 +03:00
struct f2fs_journal * journal = curseg - > journal ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
int i ;
f2fs: split journal cache from curseg cache
In curseg cache, f2fs caches two different parts:
- datas of current summay block, i.e. summary entries, footer info.
- journal info, i.e. sparse nat/sit entries or io stat info.
With this approach, 1) it may cause higher lock contention when we access
or update both of the parts of cache since we use the same mutex lock
curseg_mutex to protect the cache. 2) current summary block with last
journal info will be writebacked into device as a normal summary block
when flushing, however, we treat journal info as valid one only in current
summary, so most normal summary blocks contain junk journal data, it wastes
remaining space of summary block.
So, in order to fix above issues, we split curseg cache into two parts:
a) current summary block, protected by original mutex lock curseg_mutex
b) journal cache, protected by newly introduced r/w semaphore journal_rwsem
When loading curseg cache during ->mount, we store summary info and
journal info into different caches; When doing checkpoint, we combine
datas of two cache into current summary block for persisting.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-19 13:08:46 +03:00
down_write ( & curseg - > journal_rwsem ) ;
2016-02-14 13:50:40 +03:00
for ( i = 0 ; i < nats_in_cursum ( journal ) ; i + + ) {
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
struct nat_entry * ne ;
struct f2fs_nat_entry raw_ne ;
2016-02-14 13:50:40 +03:00
nid_t nid = le32_to_cpu ( nid_in_journal ( journal , i ) ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2021-03-22 14:47:30 +03:00
if ( f2fs_check_nid_range ( sbi , nid ) )
continue ;
2016-02-14 13:50:40 +03:00
raw_ne = nat_in_journal ( journal , i ) ;
2014-12-05 21:39:49 +03:00
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
ne = __lookup_nat_cache ( nm_i , nid ) ;
if ( ! ne ) {
2021-08-09 03:24:48 +03:00
ne = __alloc_nat_entry ( sbi , nid , true ) ;
2017-11-11 00:36:51 +03:00
__init_nat_entry ( nm_i , ne , & raw_ne , true ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2016-11-17 15:53:11 +03:00
/*
* if a free nat in journal has not been used after last
* checkpoint , we should remove it from available nids ,
* since later we will add it again .
*/
if ( ! get_nat_flag ( ne , IS_DIRTY ) & &
le32_to_cpu ( raw_ne . block_addr ) = = NULL_ADDR ) {
spin_lock ( & nm_i - > nid_list_lock ) ;
nm_i - > available_nids - - ;
spin_unlock ( & nm_i - > nid_list_lock ) ;
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
__set_nat_cache_dirty ( nm_i , ne ) ;
}
2016-02-14 13:50:40 +03:00
update_nats_in_cursum ( journal , - i ) ;
f2fs: split journal cache from curseg cache
In curseg cache, f2fs caches two different parts:
- datas of current summay block, i.e. summary entries, footer info.
- journal info, i.e. sparse nat/sit entries or io stat info.
With this approach, 1) it may cause higher lock contention when we access
or update both of the parts of cache since we use the same mutex lock
curseg_mutex to protect the cache. 2) current summary block with last
journal info will be writebacked into device as a normal summary block
when flushing, however, we treat journal info as valid one only in current
summary, so most normal summary blocks contain junk journal data, it wastes
remaining space of summary block.
So, in order to fix above issues, we split curseg cache into two parts:
a) current summary block, protected by original mutex lock curseg_mutex
b) journal cache, protected by newly introduced r/w semaphore journal_rwsem
When loading curseg cache during ->mount, we store summary info and
journal info into different caches; When doing checkpoint, we combine
datas of two cache into current summary block for persisting.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-19 13:08:46 +03:00
up_write ( & curseg - > journal_rwsem ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2014-09-22 22:40:48 +04:00
static void __adjust_nat_entry_set ( struct nat_entry_set * nes ,
struct list_head * head , int max )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
2014-09-22 22:40:48 +04:00
struct nat_entry_set * cur ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2014-09-22 22:40:48 +04:00
if ( nes - > entry_cnt > = max )
goto add_out ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2014-09-22 22:40:48 +04:00
list_for_each_entry ( cur , head , set_list ) {
if ( cur - > entry_cnt > = nes - > entry_cnt ) {
list_add ( & nes - > set_list , cur - > set_list . prev ) ;
return ;
}
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
}
2014-09-22 22:40:48 +04:00
add_out :
list_add_tail ( & nes - > set_list , head ) ;
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2021-08-20 13:54:59 +03:00
static void __update_nat_bits ( struct f2fs_nm_info * nm_i , unsigned int nat_ofs ,
unsigned int valid )
{
if ( valid = = 0 ) {
__set_bit_le ( nat_ofs , nm_i - > empty_nat_bits ) ;
__clear_bit_le ( nat_ofs , nm_i - > full_nat_bits ) ;
return ;
}
__clear_bit_le ( nat_ofs , nm_i - > empty_nat_bits ) ;
if ( valid = = NAT_ENTRY_PER_BLOCK )
__set_bit_le ( nat_ofs , nm_i - > full_nat_bits ) ;
else
__clear_bit_le ( nat_ofs , nm_i - > full_nat_bits ) ;
}
static void update_nat_bits ( struct f2fs_sb_info * sbi , nid_t start_nid ,
2017-02-09 21:38:09 +03:00
struct page * page )
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
unsigned int nat_index = start_nid / NAT_ENTRY_PER_BLOCK ;
struct f2fs_nat_block * nat_blk = page_address ( page ) ;
int valid = 0 ;
2017-10-30 10:19:48 +03:00
int i = 0 ;
2017-02-09 21:38:09 +03:00
2021-08-20 13:54:59 +03:00
if ( ! is_set_ckpt_flags ( sbi , CP_NAT_BITS_FLAG ) )
2017-02-09 21:38:09 +03:00
return ;
2017-10-30 10:19:48 +03:00
if ( nat_index = = 0 ) {
valid = 1 ;
i = 1 ;
}
for ( ; i < NAT_ENTRY_PER_BLOCK ; i + + ) {
2019-05-28 12:23:33 +03:00
if ( le32_to_cpu ( nat_blk - > entries [ i ] . block_addr ) ! = NULL_ADDR )
2017-02-09 21:38:09 +03:00
valid + + ;
}
2021-08-20 13:54:59 +03:00
__update_nat_bits ( nm_i , nat_index , valid ) ;
}
void f2fs_enable_nat_bits ( struct f2fs_sb_info * sbi )
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
unsigned int nat_ofs ;
2022-01-07 23:48:44 +03:00
f2fs_down_read ( & nm_i - > nat_tree_lock ) ;
2021-08-20 13:54:59 +03:00
for ( nat_ofs = 0 ; nat_ofs < nm_i - > nat_blocks ; nat_ofs + + ) {
unsigned int valid = 0 , nid_ofs = 0 ;
/* handle nid zero due to it should never be used */
if ( unlikely ( nat_ofs = = 0 ) ) {
valid = 1 ;
nid_ofs = 1 ;
}
for ( ; nid_ofs < NAT_ENTRY_PER_BLOCK ; nid_ofs + + ) {
if ( ! test_bit_le ( nid_ofs ,
nm_i - > free_nid_bitmap [ nat_ofs ] ) )
valid + + ;
}
__update_nat_bits ( nm_i , nat_ofs , valid ) ;
2017-02-09 21:38:09 +03:00
}
2022-01-07 23:48:44 +03:00
f2fs_up_read ( & nm_i - > nat_tree_lock ) ;
2017-02-09 21:38:09 +03:00
}
2018-09-18 03:36:06 +03:00
static int __flush_nat_entry_set ( struct f2fs_sb_info * sbi ,
2017-02-09 21:38:09 +03:00
struct nat_entry_set * set , struct cp_control * cpc )
2014-09-22 22:40:48 +04:00
{
struct curseg_info * curseg = CURSEG_I ( sbi , CURSEG_HOT_DATA ) ;
f2fs: split journal cache from curseg cache
In curseg cache, f2fs caches two different parts:
- datas of current summay block, i.e. summary entries, footer info.
- journal info, i.e. sparse nat/sit entries or io stat info.
With this approach, 1) it may cause higher lock contention when we access
or update both of the parts of cache since we use the same mutex lock
curseg_mutex to protect the cache. 2) current summary block with last
journal info will be writebacked into device as a normal summary block
when flushing, however, we treat journal info as valid one only in current
summary, so most normal summary blocks contain junk journal data, it wastes
remaining space of summary block.
So, in order to fix above issues, we split curseg cache into two parts:
a) current summary block, protected by original mutex lock curseg_mutex
b) journal cache, protected by newly introduced r/w semaphore journal_rwsem
When loading curseg cache during ->mount, we store summary info and
journal info into different caches; When doing checkpoint, we combine
datas of two cache into current summary block for persisting.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-19 13:08:46 +03:00
struct f2fs_journal * journal = curseg - > journal ;
2014-09-22 22:40:48 +04:00
nid_t start_nid = set - > set * NAT_ENTRY_PER_BLOCK ;
bool to_journal = true ;
struct f2fs_nat_block * nat_blk ;
struct nat_entry * ne , * cur ;
struct page * page = NULL ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
/*
* there are two steps to flush nat entries :
* # 1 , flush nat entries to journal in current hot data summary block .
* # 2 , flush nat entries to nat page .
*/
2021-08-20 13:54:59 +03:00
if ( ( cpc - > reason & CP_UMOUNT ) | |
2017-02-09 21:38:09 +03:00
! __has_cursum_space ( journal , set - > entry_cnt , NAT_JOURNAL ) )
2014-09-22 22:40:48 +04:00
to_journal = false ;
if ( to_journal ) {
f2fs: split journal cache from curseg cache
In curseg cache, f2fs caches two different parts:
- datas of current summay block, i.e. summary entries, footer info.
- journal info, i.e. sparse nat/sit entries or io stat info.
With this approach, 1) it may cause higher lock contention when we access
or update both of the parts of cache since we use the same mutex lock
curseg_mutex to protect the cache. 2) current summary block with last
journal info will be writebacked into device as a normal summary block
when flushing, however, we treat journal info as valid one only in current
summary, so most normal summary blocks contain junk journal data, it wastes
remaining space of summary block.
So, in order to fix above issues, we split curseg cache into two parts:
a) current summary block, protected by original mutex lock curseg_mutex
b) journal cache, protected by newly introduced r/w semaphore journal_rwsem
When loading curseg cache during ->mount, we store summary info and
journal info into different caches; When doing checkpoint, we combine
datas of two cache into current summary block for persisting.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-19 13:08:46 +03:00
down_write ( & curseg - > journal_rwsem ) ;
2014-09-22 22:40:48 +04:00
} else {
page = get_next_nat_page ( sbi , start_nid ) ;
2018-09-18 03:36:06 +03:00
if ( IS_ERR ( page ) )
return PTR_ERR ( page ) ;
2014-09-22 22:40:48 +04:00
nat_blk = page_address ( page ) ;
f2fs_bug_on ( sbi , ! nat_blk ) ;
}
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
2014-09-22 22:40:48 +04:00
/* flush dirty nats in nat entry set */
list_for_each_entry_safe ( ne , cur , & set - > entry_list , list ) {
struct f2fs_nat_entry * raw_ne ;
nid_t nid = nat_get_nid ( ne ) ;
int offset ;
2017-06-05 13:29:08 +03:00
f2fs_bug_on ( sbi , nat_get_blkaddr ( ne ) = = NEW_ADDR ) ;
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
if ( to_journal ) {
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
offset = f2fs_lookup_journal_in_cursum ( journal ,
2014-09-22 22:40:48 +04:00
NAT_JOURNAL , nid , 1 ) ;
f2fs_bug_on ( sbi , offset < 0 ) ;
2016-02-14 13:50:40 +03:00
raw_ne = & nat_in_journal ( journal , offset ) ;
nid_in_journal ( journal , offset ) = cpu_to_le32 ( nid ) ;
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
} else {
2014-09-22 22:40:48 +04:00
raw_ne = & nat_blk - > entries [ nid - start_nid ] ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2014-09-22 22:40:48 +04:00
raw_nat_from_node_info ( raw_ne , & ne - > ni ) ;
nat_reset_flag ( ne ) ;
2017-02-28 16:34:47 +03:00
__clear_nat_cache_dirty ( NM_I ( sbi ) , set , ne ) ;
2016-11-17 15:53:11 +03:00
if ( nat_get_blkaddr ( ne ) = = NULL_ADDR ) {
2017-11-22 11:07:23 +03:00
add_free_nid ( sbi , nid , false , true ) ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
} else {
spin_lock ( & NM_I ( sbi ) - > nid_list_lock ) ;
2017-03-13 15:10:41 +03:00
update_free_nid_bitmap ( sbi , nid , false , false ) ;
2016-11-17 15:53:11 +03:00
spin_unlock ( & NM_I ( sbi ) - > nid_list_lock ) ;
}
2014-09-22 22:40:48 +04:00
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2017-02-09 21:38:09 +03:00
if ( to_journal ) {
f2fs: split journal cache from curseg cache
In curseg cache, f2fs caches two different parts:
- datas of current summay block, i.e. summary entries, footer info.
- journal info, i.e. sparse nat/sit entries or io stat info.
With this approach, 1) it may cause higher lock contention when we access
or update both of the parts of cache since we use the same mutex lock
curseg_mutex to protect the cache. 2) current summary block with last
journal info will be writebacked into device as a normal summary block
when flushing, however, we treat journal info as valid one only in current
summary, so most normal summary blocks contain junk journal data, it wastes
remaining space of summary block.
So, in order to fix above issues, we split curseg cache into two parts:
a) current summary block, protected by original mutex lock curseg_mutex
b) journal cache, protected by newly introduced r/w semaphore journal_rwsem
When loading curseg cache during ->mount, we store summary info and
journal info into different caches; When doing checkpoint, we combine
datas of two cache into current summary block for persisting.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-19 13:08:46 +03:00
up_write ( & curseg - > journal_rwsem ) ;
2017-02-09 21:38:09 +03:00
} else {
2021-08-20 13:54:59 +03:00
update_nat_bits ( sbi , start_nid , page ) ;
2014-09-22 22:40:48 +04:00
f2fs_put_page ( page , 1 ) ;
2017-02-09 21:38:09 +03:00
}
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
2017-03-13 15:22:18 +03:00
/* Allow dirty nats by node block allocation in write_begin */
if ( ! set - > entry_cnt ) {
radix_tree_delete ( & NM_I ( sbi ) - > nat_set_root , set - > set ) ;
kmem_cache_free ( nat_entry_set_slab , set ) ;
}
2018-09-18 03:36:06 +03:00
return 0 ;
2014-09-22 22:40:48 +04:00
}
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
2014-09-22 22:40:48 +04:00
/*
* This function is called during the checkpointing process .
*/
2018-09-18 03:36:06 +03:00
int f2fs_flush_nat_entries ( struct f2fs_sb_info * sbi , struct cp_control * cpc )
2014-09-22 22:40:48 +04:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
struct curseg_info * curseg = CURSEG_I ( sbi , CURSEG_HOT_DATA ) ;
f2fs: split journal cache from curseg cache
In curseg cache, f2fs caches two different parts:
- datas of current summay block, i.e. summary entries, footer info.
- journal info, i.e. sparse nat/sit entries or io stat info.
With this approach, 1) it may cause higher lock contention when we access
or update both of the parts of cache since we use the same mutex lock
curseg_mutex to protect the cache. 2) current summary block with last
journal info will be writebacked into device as a normal summary block
when flushing, however, we treat journal info as valid one only in current
summary, so most normal summary blocks contain junk journal data, it wastes
remaining space of summary block.
So, in order to fix above issues, we split curseg cache into two parts:
a) current summary block, protected by original mutex lock curseg_mutex
b) journal cache, protected by newly introduced r/w semaphore journal_rwsem
When loading curseg cache during ->mount, we store summary info and
journal info into different caches; When doing checkpoint, we combine
datas of two cache into current summary block for persisting.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-02-19 13:08:46 +03:00
struct f2fs_journal * journal = curseg - > journal ;
2015-01-07 21:47:57 +03:00
struct nat_entry_set * setvec [ SETVEC_SIZE ] ;
2014-09-22 22:40:48 +04:00
struct nat_entry_set * set , * tmp ;
unsigned int found ;
nid_t set_idx = 0 ;
LIST_HEAD ( sets ) ;
2018-09-18 03:36:06 +03:00
int err = 0 ;
2014-09-22 22:40:48 +04:00
2020-11-07 00:22:05 +03:00
/*
* during unmount , let ' s flush nat_bits before checking
* nat_cnt [ DIRTY_NAT ] .
*/
2021-08-20 13:54:59 +03:00
if ( cpc - > reason & CP_UMOUNT ) {
2022-01-07 23:48:44 +03:00
f2fs_down_write ( & nm_i - > nat_tree_lock ) ;
2018-06-29 05:34:40 +03:00
remove_nats_in_journal ( sbi ) ;
2022-01-07 23:48:44 +03:00
f2fs_up_write ( & nm_i - > nat_tree_lock ) ;
2018-06-29 05:34:40 +03:00
}
2020-11-07 00:22:05 +03:00
if ( ! nm_i - > nat_cnt [ DIRTY_NAT ] )
2018-09-18 03:36:06 +03:00
return 0 ;
2016-01-02 20:19:41 +03:00
2022-01-07 23:48:44 +03:00
f2fs_down_write ( & nm_i - > nat_tree_lock ) ;
2016-01-02 20:19:41 +03:00
2014-09-22 22:40:48 +04:00
/*
* if there are no enough space in journal to store dirty nat
* entries , remove all entries from journal and merge them
* into nat entry set .
*/
2021-08-20 13:54:59 +03:00
if ( cpc - > reason & CP_UMOUNT | |
2020-11-07 00:22:05 +03:00
! __has_cursum_space ( journal ,
nm_i - > nat_cnt [ DIRTY_NAT ] , NAT_JOURNAL ) )
2014-09-22 22:40:48 +04:00
remove_nats_in_journal ( sbi ) ;
while ( ( found = __gang_lookup_nat_set ( nm_i ,
2015-01-07 21:47:57 +03:00
set_idx , SETVEC_SIZE , setvec ) ) ) {
2014-09-22 22:40:48 +04:00
unsigned idx ;
2021-04-06 04:47:35 +03:00
2014-09-22 22:40:48 +04:00
set_idx = setvec [ found - 1 ] - > set + 1 ;
for ( idx = 0 ; idx < found ; idx + + )
__adjust_nat_entry_set ( setvec [ idx ] , & sets ,
2016-02-14 13:50:40 +03:00
MAX_NAT_JENTRIES ( journal ) ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
2014-09-22 22:40:48 +04:00
/* flush dirty nats in nat entry set */
2018-09-18 03:36:06 +03:00
list_for_each_entry_safe ( set , tmp , & sets , set_list ) {
err = __flush_nat_entry_set ( sbi , set , cpc ) ;
if ( err )
break ;
}
2014-09-22 22:40:48 +04:00
2022-01-07 23:48:44 +03:00
f2fs_up_write ( & nm_i - > nat_tree_lock ) ;
2017-03-13 15:22:18 +03:00
/* Allow dirty nats by node block allocation in write_begin */
2018-09-18 03:36:06 +03:00
return err ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2017-02-09 21:38:09 +03:00
static int __get_nat_bitmaps ( struct f2fs_sb_info * sbi )
{
struct f2fs_checkpoint * ckpt = F2FS_CKPT ( sbi ) ;
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
unsigned int nat_bits_bytes = nm_i - > nat_blocks / BITS_PER_BYTE ;
unsigned int i ;
__u64 cp_ver = cur_cp_version ( ckpt ) ;
block_t nat_bits_addr ;
2018-03-20 18:08:29 +03:00
nm_i - > nat_bits_blocks = F2FS_BLK_ALIGN ( ( nat_bits_bytes < < 1 ) + 8 ) ;
2020-06-05 07:57:48 +03:00
nm_i - > nat_bits = f2fs_kvzalloc ( sbi ,
2017-11-30 14:28:17 +03:00
nm_i - > nat_bits_blocks < < F2FS_BLKSIZE_BITS , GFP_KERNEL ) ;
2017-02-09 21:38:09 +03:00
if ( ! nm_i - > nat_bits )
return - ENOMEM ;
2021-08-20 13:54:59 +03:00
nm_i - > full_nat_bits = nm_i - > nat_bits + 8 ;
nm_i - > empty_nat_bits = nm_i - > full_nat_bits + nat_bits_bytes ;
if ( ! is_set_ckpt_flags ( sbi , CP_NAT_BITS_FLAG ) )
return 0 ;
2017-02-09 21:38:09 +03:00
nat_bits_addr = __start_cp_addr ( sbi ) + sbi - > blocks_per_seg -
nm_i - > nat_bits_blocks ;
for ( i = 0 ; i < nm_i - > nat_bits_blocks ; i + + ) {
2018-07-16 19:02:17 +03:00
struct page * page ;
page = f2fs_get_meta_page ( sbi , nat_bits_addr + + ) ;
2018-10-04 06:15:20 +03:00
if ( IS_ERR ( page ) )
2018-07-16 19:02:17 +03:00
return PTR_ERR ( page ) ;
2017-02-09 21:38:09 +03:00
memcpy ( nm_i - > nat_bits + ( i < < F2FS_BLKSIZE_BITS ) ,
page_address ( page ) , F2FS_BLKSIZE ) ;
f2fs_put_page ( page , 1 ) ;
}
2017-02-25 14:53:39 +03:00
cp_ver | = ( cur_cp_crc ( ckpt ) < < 32 ) ;
2017-02-09 21:38:09 +03:00
if ( cpu_to_le64 ( cp_ver ) ! = * ( __le64 * ) nm_i - > nat_bits ) {
2021-08-20 13:54:59 +03:00
clear_ckpt_flags ( sbi , CP_NAT_BITS_FLAG ) ;
f2fs_notice ( sbi , " Disable nat_bits due to incorrect cp_ver (%llu, %llu) " ,
cp_ver , le64_to_cpu ( * ( __le64 * ) nm_i - > nat_bits ) ) ;
2017-02-09 21:38:09 +03:00
return 0 ;
}
2019-06-18 12:48:42 +03:00
f2fs_notice ( sbi , " Found nat_bits in checkpoint " ) ;
2017-02-09 21:38:09 +03:00
return 0 ;
}
2017-05-17 05:48:48 +03:00
static inline void load_free_nid_bitmap ( struct f2fs_sb_info * sbi )
2017-03-08 15:07:49 +03:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
unsigned int i = 0 ;
nid_t nid , last_nid ;
2021-08-20 13:54:59 +03:00
if ( ! is_set_ckpt_flags ( sbi , CP_NAT_BITS_FLAG ) )
2017-03-08 15:07:49 +03:00
return ;
for ( i = 0 ; i < nm_i - > nat_blocks ; i + + ) {
i = find_next_bit_le ( nm_i - > empty_nat_bits , nm_i - > nat_blocks , i ) ;
if ( i > = nm_i - > nat_blocks )
break ;
__set_bit_le ( i , nm_i - > nat_block_bitmap ) ;
nid = i * NAT_ENTRY_PER_BLOCK ;
2017-11-02 06:02:52 +03:00
last_nid = nid + NAT_ENTRY_PER_BLOCK ;
2017-03-08 15:07:49 +03:00
2017-03-13 15:10:41 +03:00
spin_lock ( & NM_I ( sbi ) - > nid_list_lock ) ;
2017-03-08 15:07:49 +03:00
for ( ; nid < last_nid ; nid + + )
2017-03-13 15:10:41 +03:00
update_free_nid_bitmap ( sbi , nid , true , true ) ;
spin_unlock ( & NM_I ( sbi ) - > nid_list_lock ) ;
2017-03-08 15:07:49 +03:00
}
for ( i = 0 ; i < nm_i - > nat_blocks ; i + + ) {
i = find_next_bit_le ( nm_i - > full_nat_bits , nm_i - > nat_blocks , i ) ;
if ( i > = nm_i - > nat_blocks )
break ;
__set_bit_le ( i , nm_i - > nat_block_bitmap ) ;
}
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
static int init_node_manager ( struct f2fs_sb_info * sbi )
{
struct f2fs_super_block * sb_raw = F2FS_RAW_SUPER ( sbi ) ;
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
unsigned char * version_bitmap ;
2017-02-09 21:38:09 +03:00
unsigned int nat_segs ;
int err ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
nm_i - > nat_blkaddr = le32_to_cpu ( sb_raw - > nat_blkaddr ) ;
/* segment_count_nat includes pair segment so divide to 2. */
nat_segs = le32_to_cpu ( sb_raw - > segment_count_nat ) > > 1 ;
2017-02-09 21:38:09 +03:00
nm_i - > nat_blocks = nat_segs < < le32_to_cpu ( sb_raw - > log_blocks_per_seg ) ;
nm_i - > max_nid = NAT_ENTRY_PER_BLOCK * nm_i - > nat_blocks ;
2014-04-18 06:14:37 +04:00
2014-02-17 07:44:20 +04:00
/* not used nids: 0, node, meta, (and root counted as valid node) */
2016-11-17 15:53:11 +03:00
nm_i - > available_nids = nm_i - > max_nid - sbi - > total_valid_node_count -
2019-08-05 13:27:25 +03:00
F2FS_RESERVED_NODE_NUM ;
2017-09-29 08:59:35 +03:00
nm_i - > nid_cnt [ FREE_NID ] = 0 ;
nm_i - > nid_cnt [ PREALLOC_NID ] = 0 ;
2014-03-19 08:31:37 +04:00
nm_i - > ram_thresh = DEF_RAM_THRESHOLD ;
2015-10-12 12:08:48 +03:00
nm_i - > ra_nid_pages = DEF_RA_NID_PAGES ;
2016-01-18 13:32:58 +03:00
nm_i - > dirty_nats_ratio = DEF_DIRTY_NAT_RATIO_THRESHOLD ;
2022-01-28 00:31:43 +03:00
nm_i - > max_rf_node_blocks = DEF_RF_NODE_BLOCKS ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2014-02-21 09:29:35 +04:00
INIT_RADIX_TREE ( & nm_i - > free_nid_root , GFP_ATOMIC ) ;
2017-09-29 08:59:35 +03:00
INIT_LIST_HEAD ( & nm_i - > free_nid_list ) ;
2014-12-04 07:47:26 +03:00
INIT_RADIX_TREE ( & nm_i - > nat_root , GFP_NOIO ) ;
INIT_RADIX_TREE ( & nm_i - > nat_set_root , GFP_NOIO ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
INIT_LIST_HEAD ( & nm_i - > nat_entries ) ;
2018-08-05 18:08:59 +03:00
spin_lock_init ( & nm_i - > nat_list_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
mutex_init ( & nm_i - > build_lock ) ;
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
spin_lock_init ( & nm_i - > nid_list_lock ) ;
2022-01-07 23:48:44 +03:00
init_f2fs_rwsem ( & nm_i - > nat_tree_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
nm_i - > next_scan_nid = le32_to_cpu ( sbi - > ckpt - > next_free_nid ) ;
2013-03-28 04:24:53 +04:00
nm_i - > bitmap_size = __bitmap_size ( sbi , NAT_BITMAP ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
version_bitmap = __bitmap_ptr ( sbi , NAT_BITMAP ) ;
2013-03-28 04:24:53 +04:00
nm_i - > nat_bitmap = kmemdup ( version_bitmap , nm_i - > bitmap_size ,
GFP_KERNEL ) ;
if ( ! nm_i - > nat_bitmap )
return - ENOMEM ;
2017-01-07 13:52:01 +03:00
2017-02-09 21:38:09 +03:00
err = __get_nat_bitmaps ( sbi ) ;
if ( err )
return err ;
2017-01-07 13:52:01 +03:00
# ifdef CONFIG_F2FS_CHECK_FS
nm_i - > nat_bitmap_mir = kmemdup ( version_bitmap , nm_i - > bitmap_size ,
GFP_KERNEL ) ;
if ( ! nm_i - > nat_bitmap_mir )
return - ENOMEM ;
# endif
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
return 0 ;
}
2017-03-10 20:39:57 +03:00
static int init_free_nid_cache ( struct f2fs_sb_info * sbi )
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
2018-03-10 04:42:28 +03:00
int i ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
treewide: Use array_size() in f2fs_kzalloc()
The f2fs_kzalloc() function has no 2-factor argument form, so
multiplication factors need to be wrapped in array_size(). This patch
replaces cases of:
f2fs_kzalloc(handle, a * b, gfp)
with:
f2fs_kzalloc(handle, array_size(a, b), gfp)
as well as handling cases of:
f2fs_kzalloc(handle, a * b * c, gfp)
with:
f2fs_kzalloc(handle, array3_size(a, b, c), gfp)
This does, however, attempt to ignore constant size factors like:
f2fs_kzalloc(handle, 4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@
(
f2fs_kzalloc(HANDLE,
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
f2fs_kzalloc(HANDLE,
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@
(
f2fs_kzalloc(HANDLE,
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(char) * COUNT
+ COUNT
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
f2fs_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT_ID)
+ array_size(COUNT_ID, sizeof(TYPE))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT_ID
+ array_size(COUNT_ID, sizeof(TYPE))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT_CONST)
+ array_size(COUNT_CONST, sizeof(TYPE))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT_CONST
+ array_size(COUNT_CONST, sizeof(TYPE))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(THING) * (COUNT_ID)
+ array_size(COUNT_ID, sizeof(THING))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(THING) * COUNT_ID
+ array_size(COUNT_ID, sizeof(THING))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(THING) * (COUNT_CONST)
+ array_size(COUNT_CONST, sizeof(THING))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(THING) * COUNT_CONST
+ array_size(COUNT_CONST, sizeof(THING))
, ...)
)
// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@
f2fs_kzalloc(HANDLE,
- SIZE * COUNT
+ array_size(COUNT, SIZE)
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
f2fs_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
f2fs_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
f2fs_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@
(
f2fs_kzalloc(HANDLE,
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
f2fs_kzalloc(HANDLE,
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
f2fs_kzalloc(HANDLE,
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
f2fs_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
f2fs_kzalloc(HANDLE,
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
f2fs_kzalloc(HANDLE,
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
f2fs_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
f2fs_kzalloc(HANDLE,
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
f2fs_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
f2fs_kzalloc(HANDLE,
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants.
@@
expression HANDLE;
expression E1, E2;
constant C1, C2;
@@
(
f2fs_kzalloc(HANDLE, C1 * C2, ...)
|
f2fs_kzalloc(HANDLE,
- E1 * E2
+ array_size(E1, E2)
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 00:28:23 +03:00
nm_i - > free_nid_bitmap =
2020-06-05 07:57:48 +03:00
f2fs_kvzalloc ( sbi , array_size ( sizeof ( unsigned char * ) ,
nm_i - > nat_blocks ) ,
GFP_KERNEL ) ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
if ( ! nm_i - > free_nid_bitmap )
return - ENOMEM ;
2018-03-10 04:42:28 +03:00
for ( i = 0 ; i < nm_i - > nat_blocks ; i + + ) {
nm_i - > free_nid_bitmap [ i ] = f2fs_kvzalloc ( sbi ,
2018-06-27 09:46:21 +03:00
f2fs_bitmap_size ( NAT_ENTRY_PER_BLOCK ) , GFP_KERNEL ) ;
2018-07-02 05:40:19 +03:00
if ( ! nm_i - > free_nid_bitmap [ i ] )
2018-03-10 04:42:28 +03:00
return - ENOMEM ;
}
2017-11-30 14:28:18 +03:00
nm_i - > nat_block_bitmap = f2fs_kvzalloc ( sbi , nm_i - > nat_blocks / 8 ,
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
GFP_KERNEL ) ;
if ( ! nm_i - > nat_block_bitmap )
return - ENOMEM ;
2017-03-01 12:09:07 +03:00
treewide: Use array_size in f2fs_kvzalloc()
The f2fs_kvzalloc() function has no 2-factor argument form, so
multiplication factors need to be wrapped in array_size(). This patch
replaces cases of:
f2fs_kvzalloc(handle, a * b, gfp)
with:
f2fs_kvzalloc(handle, array_size(a, b), gfp)
as well as handling cases of:
f2fs_kvzalloc(handle, a * b * c, gfp)
with:
f2fs_kvzalloc(handle, array3_size(a, b, c), gfp)
This does, however, attempt to ignore constant size factors like:
f2fs_kvzalloc(handle, 4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@
(
f2fs_kvzalloc(HANDLE,
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
f2fs_kvzalloc(HANDLE,
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@
(
f2fs_kvzalloc(HANDLE,
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(char) * COUNT
+ COUNT
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
f2fs_kvzalloc(HANDLE,
- sizeof(TYPE) * (COUNT_ID)
+ array_size(COUNT_ID, sizeof(TYPE))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(TYPE) * COUNT_ID
+ array_size(COUNT_ID, sizeof(TYPE))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(TYPE) * (COUNT_CONST)
+ array_size(COUNT_CONST, sizeof(TYPE))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(TYPE) * COUNT_CONST
+ array_size(COUNT_CONST, sizeof(TYPE))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(THING) * (COUNT_ID)
+ array_size(COUNT_ID, sizeof(THING))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(THING) * COUNT_ID
+ array_size(COUNT_ID, sizeof(THING))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(THING) * (COUNT_CONST)
+ array_size(COUNT_CONST, sizeof(THING))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(THING) * COUNT_CONST
+ array_size(COUNT_CONST, sizeof(THING))
, ...)
)
// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@
f2fs_kvzalloc(HANDLE,
- SIZE * COUNT
+ array_size(COUNT, SIZE)
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
f2fs_kvzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
f2fs_kvzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
f2fs_kvzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@
(
f2fs_kvzalloc(HANDLE,
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
f2fs_kvzalloc(HANDLE,
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
f2fs_kvzalloc(HANDLE,
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
f2fs_kvzalloc(HANDLE,
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
f2fs_kvzalloc(HANDLE,
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
f2fs_kvzalloc(HANDLE,
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
f2fs_kvzalloc(HANDLE,
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
f2fs_kvzalloc(HANDLE,
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
f2fs_kvzalloc(HANDLE, C1 * C2 * C3, ...)
|
f2fs_kvzalloc(HANDLE,
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants.
@@
expression HANDLE;
expression E1, E2;
constant C1, C2;
@@
(
f2fs_kvzalloc(HANDLE, C1 * C2, ...)
|
f2fs_kvzalloc(HANDLE,
- E1 * E2
+ array_size(E1, E2)
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 00:28:35 +03:00
nm_i - > free_nid_count =
f2fs_kvzalloc ( sbi , array_size ( sizeof ( unsigned short ) ,
nm_i - > nat_blocks ) ,
GFP_KERNEL ) ;
2017-03-01 12:09:07 +03:00
if ( ! nm_i - > free_nid_count )
return - ENOMEM ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
return 0 ;
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
int f2fs_build_node_manager ( struct f2fs_sb_info * sbi )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
int err ;
2017-11-30 14:28:17 +03:00
sbi - > nm_info = f2fs_kzalloc ( sbi , sizeof ( struct f2fs_nm_info ) ,
GFP_KERNEL ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( ! sbi - > nm_info )
return - ENOMEM ;
err = init_node_manager ( sbi ) ;
if ( err )
return err ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
err = init_free_nid_cache ( sbi ) ;
if ( err )
return err ;
2017-03-08 15:07:49 +03:00
/* load free nid status from nat_bits table */
load_free_nid_bitmap ( sbi ) ;
2018-06-15 09:45:57 +03:00
return f2fs_build_free_nids ( sbi , true , true ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
void f2fs_destroy_node_manager ( struct f2fs_sb_info * sbi )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
struct f2fs_nm_info * nm_i = NM_I ( sbi ) ;
struct free_nid * i , * next_i ;
struct nat_entry * natvec [ NATVEC_SIZE ] ;
2015-01-07 21:47:57 +03:00
struct nat_entry_set * setvec [ SETVEC_SIZE ] ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
nid_t nid = 0 ;
unsigned int found ;
if ( ! nm_i )
return ;
/* destroy free nid list */
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
spin_lock ( & nm_i - > nid_list_lock ) ;
2017-09-29 08:59:35 +03:00
list_for_each_entry_safe ( i , next_i , & nm_i - > free_nid_list , list ) {
2017-10-28 14:03:37 +03:00
__remove_free_nid ( sbi , i , FREE_NID ) ;
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
spin_unlock ( & nm_i - > nid_list_lock ) ;
2014-04-02 04:55:00 +04:00
kmem_cache_free ( free_nid_slab , i ) ;
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
spin_lock ( & nm_i - > nid_list_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2017-09-29 08:59:35 +03:00
f2fs_bug_on ( sbi , nm_i - > nid_cnt [ FREE_NID ] ) ;
f2fs_bug_on ( sbi , nm_i - > nid_cnt [ PREALLOC_NID ] ) ;
f2fs_bug_on ( sbi , ! list_empty ( & nm_i - > free_nid_list ) ) ;
f2fs: split free nid list
During free nid allocation, in order to do preallocation, we will tag free
nid entry as allocated one and still leave it in free nid list, for other
allocators who want to grab free nids, it needs to traverse the free nid
list for lookup. It becomes overhead in scenario of allocating free nid
intensively by multithreads.
This patch splits free nid list to two list: {free,alloc}_nid_list, to
keep free nids and preallocated free nids separately, after that, traverse
latency will be gone, besides split nid_cnt for separate statistic.
Additionally, introduce __insert_nid_to_list and __remove_nid_from_list for
cleanup.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: modify f2fs_bug_on to avoid needless branches]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-10-12 14:28:29 +03:00
spin_unlock ( & nm_i - > nid_list_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
/* destroy nat cache */
2022-01-07 23:48:44 +03:00
f2fs_down_write ( & nm_i - > nat_tree_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
while ( ( found = __gang_lookup_nat_cache ( nm_i ,
nid , NATVEC_SIZE , natvec ) ) ) {
unsigned idx ;
2015-01-07 21:47:57 +03:00
2014-03-07 14:43:24 +04:00
nid = nat_get_nid ( natvec [ found - 1 ] ) + 1 ;
2018-08-05 18:08:59 +03:00
for ( idx = 0 ; idx < found ; idx + + ) {
spin_lock ( & nm_i - > nat_list_lock ) ;
list_del ( & natvec [ idx ] - > list ) ;
spin_unlock ( & nm_i - > nat_list_lock ) ;
2014-03-07 14:43:24 +04:00
__del_from_nat_cache ( nm_i , natvec [ idx ] ) ;
2018-08-05 18:08:59 +03:00
}
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
2020-11-07 00:22:05 +03:00
f2fs_bug_on ( sbi , nm_i - > nat_cnt [ TOTAL_NAT ] ) ;
2015-01-07 21:47:57 +03:00
/* destroy nat set cache */
nid = 0 ;
while ( ( found = __gang_lookup_nat_set ( nm_i ,
nid , SETVEC_SIZE , setvec ) ) ) {
unsigned idx ;
nid = setvec [ found - 1 ] - > set + 1 ;
for ( idx = 0 ; idx < found ; idx + + ) {
/* entry_cnt is not zero, when cp_error was occurred */
f2fs_bug_on ( sbi , ! list_empty ( & setvec [ idx ] - > entry_list ) ) ;
radix_tree_delete ( & nm_i - > nat_set_root , setvec [ idx ] - > set ) ;
kmem_cache_free ( nat_entry_set_slab , setvec [ idx ] ) ;
}
}
2022-01-07 23:48:44 +03:00
f2fs_up_write ( & nm_i - > nat_tree_lock ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
kvfree ( nm_i - > nat_block_bitmap ) ;
2018-03-10 04:42:28 +03:00
if ( nm_i - > free_nid_bitmap ) {
int i ;
for ( i = 0 ; i < nm_i - > nat_blocks ; i + + )
kvfree ( nm_i - > free_nid_bitmap [ i ] ) ;
2018-12-14 05:38:33 +03:00
kvfree ( nm_i - > free_nid_bitmap ) ;
2018-03-10 04:42:28 +03:00
}
2017-03-01 12:09:07 +03:00
kvfree ( nm_i - > free_nid_count ) ;
f2fs: introduce free nid bitmap
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-02-23 05:53:49 +03:00
2018-12-14 05:38:33 +03:00
kvfree ( nm_i - > nat_bitmap ) ;
kvfree ( nm_i - > nat_bits ) ;
2017-01-07 13:52:01 +03:00
# ifdef CONFIG_F2FS_CHECK_FS
2018-12-14 05:38:33 +03:00
kvfree ( nm_i - > nat_bitmap_mir ) ;
2017-01-07 13:52:01 +03:00
# endif
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
sbi - > nm_info = NULL ;
2020-09-14 11:47:00 +03:00
kfree ( nm_i ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
int __init f2fs_create_node_manager_caches ( void )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
2020-02-17 12:46:20 +03:00
nat_entry_slab = f2fs_kmem_cache_create ( " f2fs_nat_entry " ,
2014-03-07 14:43:28 +04:00
sizeof ( struct nat_entry ) ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
if ( ! nat_entry_slab )
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
goto fail ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
2020-02-17 12:46:20 +03:00
free_nid_slab = f2fs_kmem_cache_create ( " f2fs_free_nid " ,
2014-03-07 14:43:28 +04:00
sizeof ( struct free_nid ) ) ;
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
if ( ! free_nid_slab )
2014-11-24 17:52:00 +03:00
goto destroy_nat_entry ;
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
2020-02-17 12:46:20 +03:00
nat_entry_set_slab = f2fs_kmem_cache_create ( " f2fs_nat_entry_set " ,
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
sizeof ( struct nat_entry_set ) ) ;
if ( ! nat_entry_set_slab )
2014-11-24 17:52:00 +03:00
goto destroy_free_nid ;
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
2020-02-17 12:46:20 +03:00
fsync_node_entry_slab = f2fs_kmem_cache_create ( " f2fs_fsync_node_entry " ,
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
sizeof ( struct fsync_node_entry ) ) ;
if ( ! fsync_node_entry_slab )
goto destroy_nat_entry_set ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
return 0 ;
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
destroy_nat_entry_set :
kmem_cache_destroy ( nat_entry_set_slab ) ;
2014-11-24 17:52:00 +03:00
destroy_free_nid :
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
kmem_cache_destroy ( free_nid_slab ) ;
2014-11-24 17:52:00 +03:00
destroy_nat_entry :
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
kmem_cache_destroy ( nat_entry_slab ) ;
fail :
return - ENOMEM ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
}
f2fs: clean up symbol namespace
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-05-29 19:20:41 +03:00
void f2fs_destroy_node_manager_caches ( void )
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
{
f2fs: fix to avoid broken of dnode block list
f2fs recovery flow is relying on dnode block link list, it means fsynced
file recovery depends on previous dnode's persistence in the list, so
during fsync() we should wait on all regular inode's dnode writebacked
before issuing flush.
By this way, we can avoid dnode block list being broken by out-of-order
IO submission due to IO scheduler or driver.
Sheng Yong helps to do the test with this patch:
Target:/data (f2fs, -)
64MB / 32768KB / 4KB / 8
1 / PERSIST / Index
Base:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 867.82 204.15 41440.03 41370.54 680.8 1025.94 1031.08
2 871.87 205.87 41370.3 40275.2 791.14 1065.84 1101.7
3 866.52 205.69 41795.67 40596.16 694.69 1037.16 1031.48
Avg 868.7366667 205.2366667 41535.33333 40747.3 722.21 1042.98 1054.753333
After:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 798.81 202.5 41143 40613.87 602.71 838.08 913.83
2 805.79 206.47 40297.2 41291.46 604.44 840.75 924.27
3 814.83 206.17 41209.57 40453.62 602.85 834.66 927.91
Avg 806.4766667 205.0466667 40883.25667 40786.31667 603.3333333 837.83 922.0033333
Patched/Original:
0.928332713 0.999074239 0.984300676 1.000957528 0.835398753 0.803303994 0.874141189
It looks like atomic write will suffer performance regression.
I suspect that the criminal is that we forcing to wait all dnode being in
storage cache before we issue PREFLUSH+FUA.
BTW, will commit ("f2fs: don't need to wait for node writes for atomic write")
cause the problem: we will lose data of last transaction after SPO, even if
atomic write return no error:
- atomic_open();
- write() P1, P2, P3;
- atomic_commit();
- writeback data: P1, P2, P3;
- writeback node: N1, N2, N3; <--- If N1, N2 is not writebacked, N3 with fsync_mark is
writebacked, In SPOR, we won't find N3 since node chain is broken, turns out that losing
last transaction.
- preflush + fua;
- power-cut
If we don't wait dnode writeback for atomic_write:
SEQ-RD(MB/s) SEQ-WR(MB/s) RND-RD(IOPS) RND-WR(IOPS) Insert(TPS) Update(TPS) Delete(TPS)
1 779.91 206.03 41621.5 40333.16 716.9 1038.21 1034.85
2 848.51 204.35 40082.44 39486.17 791.83 1119.96 1083.77
3 772.12 206.27 41335.25 41599.65 723.29 1055.07 971.92
Avg 800.18 205.55 41013.06333 40472.99333 744.0066667 1071.08 1030.18
Patched/Original:
0.92108464 1.001526693 0.987425886 0.993268102 1.030180511 1.026942031 0.976702294
SQLite's performance recovers.
Jaegeuk:
"Practically, I don't see db corruption becase of this. We can excuse to lose
the last transaction."
Finally, we decide to keep original implementation of atomic write interface
sematics that we don't wait all dnode writeback before preflush+fua submission.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-02 18:03:19 +03:00
kmem_cache_destroy ( fsync_node_entry_slab ) ;
f2fs: refactor flush_nat_entries codes for reducing NAT writes
Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time.
In this patch we merge dirty entries located in same NAT block to nat entry set,
and linked all set to list, sorted ascending order by entries' count of set.
Later we flush entries in sparse set into journal as many as we can, and then
flush merged entries to disk. In this way we can not only gain in performance,
but also save lifetime of flash device.
In my testing environment, it shows this patch can help to reduce NAT block
writes obviously. In hard disk test case: cost time of fsstress is stablely
reduced by about 5%.
1. virtual machine + hard disk:
fsstress -p 20 -n 200 -l 5
node num cp count nodes/cp
based 4599.6 1803.0 2.551
patched 2714.6 1829.6 1.483
2. virtual machine + 32g micro SD card:
fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0
-f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5
-f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S
node num cp count nodes/cp
based 84.5 43.7 1.933
patched 49.2 40.0 1.23
Our latency of merging op shows not bad when handling extreme case like:
merging a great number of dirty nats:
latency(ns) dirty nat count
3089219 24922
5129423 27422
4000250 24523
change log from v1:
o fix wrong logic in add_nat_entry when grab a new nat entry set.
o swith to create slab cache in create_node_manager_caches.
o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency.
change log from v2:
o make comment position more appropriate suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
kmem_cache_destroy ( nat_entry_set_slab ) ;
f2fs: add node operations
This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.
- The key information of an NAT entry consists of a node id and a block address.
- An NAT page is composed of block addresses covered by a certain range of NAT
entries, which is maintained by the address space of meta_inode.
- A radix tree structure is used to cache NAT entries. The index for the tree
is a node id.
- When there is no free nid, F2FS should scan NAT entries to find new one. In
order to avoid scanning frequently, F2FS manages a list containing a number of
free nids in memory. Only when free nids in the list are exhausted, scanning
process, build_free_nids(), is triggered.
- F2FS has direct and indirect node blocks for indexing data. This patch adds
fuctions related to the node block management such as getting, allocating, and
truncating node blocks to index data.
- In order to cache node blocks in memory, F2FS has a node_inode with an address
space for node pages. This patch also adds the address space operations for
node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-02 12:08:50 +04:00
kmem_cache_destroy ( free_nid_slab ) ;
kmem_cache_destroy ( nat_entry_slab ) ;
}