iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
f4209f692e
linux/sound/soc/codecs/wm8804.h

71 lines
1.7 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-04 11:11:33 +03:00
/* SPDX-License-Identifier: GPL-2.0-only */
ASoC: WM8804: Initial driver The WM8804 is a high performance consumer mode S/PDIF transceiver with support for 1 received channel and 1 transmitted channel. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-29 14:14:56 +04:00
/*
* wm8804.h -- WM8804 S/PDIF transceiver driver
*
* Copyright 2010 Wolfson Microelectronics plc
*
* Author: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
*/
#ifndef _WM8804_H
#define _WM8804_H
ASoC: wm8804: Split out bus drivers Simplify dependencies by using new style split out bus interfaces. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-22 19:43:21 +03:00
#include <linux/regmap.h>
ASoC: WM8804: Initial driver The WM8804 is a high performance consumer mode S/PDIF transceiver with support for 1 received channel and 1 transmitted channel. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-29 14:14:56 +04:00
/*
* Register values.
*/
#define WM8804_RST_DEVID1 0x00
#define WM8804_DEVID2 0x01
#define WM8804_DEVREV 0x02
#define WM8804_PLL1 0x03
#define WM8804_PLL2 0x04
#define WM8804_PLL3 0x05
#define WM8804_PLL4 0x06
#define WM8804_PLL5 0x07
#define WM8804_PLL6 0x08
#define WM8804_SPDMODE 0x09
#define WM8804_INTMASK 0x0A
#define WM8804_INTSTAT 0x0B
#define WM8804_SPDSTAT 0x0C
#define WM8804_RXCHAN1 0x0D
#define WM8804_RXCHAN2 0x0E
#define WM8804_RXCHAN3 0x0F
#define WM8804_RXCHAN4 0x10
#define WM8804_RXCHAN5 0x11
#define WM8804_SPDTX1 0x12
#define WM8804_SPDTX2 0x13
#define WM8804_SPDTX3 0x14
#define WM8804_SPDTX4 0x15
#define WM8804_SPDTX5 0x16
#define WM8804_GPO0 0x17
#define WM8804_GPO1 0x18
#define WM8804_GPO2 0x1A
#define WM8804_AIFTX 0x1B
#define WM8804_AIFRX 0x1C
#define WM8804_SPDRX1 0x1D
#define WM8804_PWRDN 0x1E
#define WM8804_REGISTER_COUNT 30
#define WM8804_MAX_REGISTER 0x1E
#define WM8804_TX_CLKSRC_MCLK 1
#define WM8804_TX_CLKSRC_PLL 2
#define WM8804_CLKOUT_SRC_CLK1 3
#define WM8804_CLKOUT_SRC_OSCCLK 4
#define WM8804_CLKOUT_DIV 1
ASoC: wm8804: Allow control of master clock divider in PLL generation WM8804 can run with PLL frequencies of 256xfs and 128xfs for most sample rates. At 192kHz only 128xfs is supported. The existing driver selects 128xfs automatically for some lower samples rates. By using an additional mclk_div divider, it is now possible to control the behaviour. This allows using 256xfs PLL frequency on all sample rates up to 96kHz. It should allow lower jitter and better signal quality. The behavior has to be controlled by the sound card driver, because some sample frequency share the same setting. e.g. 192kHz and 96kHz use 24.576MHz master clock. The only difference is the MCLK divider. Signed-off-by: Daniel Matuschek <daniel@matuschek.net> Tested-by: Florian Meier <florian.meier@koalo.de> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-29 18:08:03 +04:00
#define WM8804_MCLK_DIV 2
#define WM8804_MCLKDIV_256FS 0
#define WM8804_MCLKDIV_128FS 1
ASoC: WM8804: Initial driver The WM8804 is a high performance consumer mode S/PDIF transceiver with support for 1 received channel and 1 transmitted channel. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-29 14:14:56 +04:00
ASoC: wm8804: Split out bus drivers Simplify dependencies by using new style split out bus interfaces. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-22 19:43:21 +03:00
extern const struct regmap_config wm8804_regmap_config;
ASoC: wm8804: Enable runtime PM Currently both the oscillator and the PLL are powered up in set_bias_level. This can be problematic when using output clocks from the wm8804 for other devices. The snd_soc_codec_set_pll API defines that a clock should be available once the call returns, however, with all the clocking controlled in set_bias_level this is not currently the case. This patch enables pm_runtime for the wm8804, enabling both the regulators and the oscillator when the chip resumes, and enabling the PLL in the snd_soc_codec_set_pll call. Naturally the enabling the PLL will also cause the chip to resume. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-07 14:55:10 +03:00
extern const struct dev_pm_ops wm8804_pm;
ASoC: wm8804: Split out bus drivers Simplify dependencies by using new style split out bus interfaces. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-22 19:43:21 +03:00
int wm8804_probe(struct device *dev, struct regmap *regmap);
void wm8804_remove(struct device *dev);
ASoC: WM8804: Initial driver The WM8804 is a high performance consumer mode S/PDIF transceiver with support for 1 received channel and 1 transmitted channel. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-29 14:14:56 +04:00
#endif /* _WM8804_H */
Reference in New Issue Copy Permalink