iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
f655630633
linux/drivers/video/matrox/matroxfb_DAC1064.h

180 lines
6.8 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#ifndef __MATROXFB_DAC1064_H__
#define __MATROXFB_DAC1064_H__
#include "matroxfb_base.h"
#ifdef CONFIG_FB_MATROX_MYSTIQUE
extern struct matrox_switch matrox_mystique;
#endif
#ifdef CONFIG_FB_MATROX_G
extern struct matrox_switch matrox_G100;
#endif
#ifdef NEED_DAC1064
void DAC1064_global_init(WPMINFO2);
void DAC1064_global_restore(WPMINFO2);
#endif
#define M1064_INDEX 0x00
#define M1064_PALWRADD 0x00
#define M1064_PALDATA 0x01
#define M1064_PIXRDMSK 0x02
#define M1064_PALRDADD 0x03
#define M1064_X_DATAREG 0x0A
#define M1064_CURPOSXL 0x0C /* can be accessed as DWORD */
#define M1064_CURPOSXH 0x0D
#define M1064_CURPOSYL 0x0E
#define M1064_CURPOSYH 0x0F
#define M1064_XCURADDL 0x04
#define M1064_XCURADDH 0x05
#define M1064_XCURCTRL 0x06
#define M1064_XCURCTRL_DIS 0x00 /* transparent, transparent, transparent, transparent */
#define M1064_XCURCTRL_3COLOR 0x01 /* transparent, 0, 1, 2 */
#define M1064_XCURCTRL_XGA 0x02 /* 0, 1, transparent, complement */
#define M1064_XCURCTRL_XWIN 0x03 /* transparent, transparent, 0, 1 */
matroxfb: rectify jitter (G450/G550) This builds upon my previous attempts to resolve some jitter problems seen with the Matrox G450 and G550 -based cards, including odd disparities observed between x86 and Power -based machines in a somewhat less hackish way (removing the hacked ifdefs). Apparently, preference should be given to use the DVI PLL when frequencies permit, the Standard PLL otherwise. The max pixel clock for the panellink interface is extracted from the PInS information on the card and used as a limit to determine which PLL to use. Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Acked-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11 00:00:49 +04:00
/* drive DVI by standard(0)/DVI(1) PLL */
/* if set(1), C?DVICLKEN and C?DVICLKSEL must be set(1) */
#define M1064_XDVICLKCTRL_DVIDATAPATHSEL 0x01
/* drive CRTC1 by standard(0)/DVI(1) PLL */
#define M1064_XDVICLKCTRL_C1DVICLKSEL 0x02
/* drive CRTC2 by standard(0)/DVI(1) PLL */
#define M1064_XDVICLKCTRL_C2DVICLKSEL 0x04
/* pixel clock allowed to(0)/blocked from(1) driving CRTC1 */
#define M1064_XDVICLKCTRL_C1DVICLKEN 0x08
/* DVI PLL loop filter bandwidth selection bits */
#define M1064_XDVICLKCTRL_DVILOOPCTL 0x30
/* CRTC2 pixel clock allowed to(0)/blocked from(1) driving CRTC2 */
#define M1064_XDVICLKCTRL_C2DVICLKEN 0x40
/* P1PLL loop filter bandwith selection */
#define M1064_XDVICLKCTRL_P1LOOPBWDTCTL 0x80
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#define M1064_XCURCOL0RED 0x08
#define M1064_XCURCOL0GREEN 0x09
#define M1064_XCURCOL0BLUE 0x0A
#define M1064_XCURCOL1RED 0x0C
#define M1064_XCURCOL1GREEN 0x0D
#define M1064_XCURCOL1BLUE 0x0E
[PATCH] matroxfb: fix DVI setup to be more compatible There has been a longstanding problem with the Matrox G450 and perhaps other similar cards, with modes "above" 1280x1024-60 on ppc/ppc64 boxes running Linux. Higher resolutions and/or higher refresh rates resulted in a very noticably "jittery" display, and sometimes no display, depending on the physical monitor. This patch fixes that problem on the systems I have easy access to... I've tested with SLES9SP3 (2.6.5+ kernel) and 2.6.16-rc6 custom kernels on an IBM eServer p5 520 w/G450 (a.k.a GXT135P on IBM's ppc64 systems), and a colleague of mine (Ian Romanick) tested it successfully on an Apple ppc32 box (w/GXT135P). I also tested it on IA32 box I have with a GXT135P to verify that it didn't obviously break anything. In my testing, I covered single-card, single and dual-head setups using both HD15 and DVI-D signals, on both the IA32 and ppc64 boxes. While everything appeared fine on both boxes, I did encounter one problem: I can't get any signal on the DVI-D output on the ppc64 box. However, this is also the case without my patch. I just noticed that screen-blanking only occurs on the primary display as well. Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Signed-off-by: Ian Romanick <idr@us.ibm.com> Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 01:59:51 +04:00
#define M1064_XDVICLKCTRL 0x0F
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#define M1064_XCURCOL2RED 0x10
#define M1064_XCURCOL2GREEN 0x11
#define M1064_XCURCOL2BLUE 0x12
#define DAC1064_XVREFCTRL 0x18
#define DAC1064_XVREFCTRL_INTERNAL 0x3F
#define DAC1064_XVREFCTRL_EXTERNAL 0x00
#define DAC1064_XVREFCTRL_G100_DEFAULT 0x03
#define M1064_XMULCTRL 0x19
#define M1064_XMULCTRL_DEPTH_8BPP 0x00 /* 8 bpp paletized */
#define M1064_XMULCTRL_DEPTH_15BPP_1BPP 0x01 /* 15 bpp paletized + 1 bpp overlay */
#define M1064_XMULCTRL_DEPTH_16BPP 0x02 /* 16 bpp paletized */
#define M1064_XMULCTRL_DEPTH_24BPP 0x03 /* 24 bpp paletized */
#define M1064_XMULCTRL_DEPTH_24BPP_8BPP 0x04 /* 24 bpp direct + 8 bpp overlay paletized */
#define M1064_XMULCTRL_2G8V16 0x05 /* 15 bpp video direct, half xres, 8bpp paletized */
#define M1064_XMULCTRL_G16V16 0x06 /* 15 bpp video, 15bpp graphics, one of them paletized */
#define M1064_XMULCTRL_DEPTH_32BPP 0x07 /* 24 bpp paletized + 8 bpp unused */
#define M1064_XMULCTRL_GRAPHICS_PALETIZED 0x00
#define M1064_XMULCTRL_VIDEO_PALETIZED 0x08
#define M1064_XPIXCLKCTRL 0x1A
#define M1064_XPIXCLKCTRL_SRC_PCI 0x00
#define M1064_XPIXCLKCTRL_SRC_PLL 0x01
#define M1064_XPIXCLKCTRL_SRC_EXT 0x02
#define M1064_XPIXCLKCTRL_SRC_SYS 0x03 /* G200/G400 */
#define M1064_XPIXCLKCTRL_SRC_PLL2 0x03 /* G450 */
#define M1064_XPIXCLKCTRL_SRC_MASK 0x03
#define M1064_XPIXCLKCTRL_EN 0x00
#define M1064_XPIXCLKCTRL_DIS 0x04
#define M1064_XPIXCLKCTRL_PLL_DOWN 0x00
#define M1064_XPIXCLKCTRL_PLL_UP 0x08
#define M1064_XGENCTRL 0x1D
#define M1064_XGENCTRL_VS_0 0x00
#define M1064_XGENCTRL_VS_1 0x01
#define M1064_XGENCTRL_ALPHA_DIS 0x00
#define M1064_XGENCTRL_ALPHA_EN 0x02
#define M1064_XGENCTRL_BLACK_0IRE 0x00
#define M1064_XGENCTRL_BLACK_75IRE 0x10
#define M1064_XGENCTRL_SYNC_ON_GREEN 0x00
#define M1064_XGENCTRL_NO_SYNC_ON_GREEN 0x20
#define M1064_XGENCTRL_SYNC_ON_GREEN_MASK 0x20
#define M1064_XMISCCTRL 0x1E
#define M1064_XMISCCTRL_DAC_DIS 0x00
#define M1064_XMISCCTRL_DAC_EN 0x01
#define M1064_XMISCCTRL_MFC_VGA 0x00
#define M1064_XMISCCTRL_MFC_MAFC 0x02
#define M1064_XMISCCTRL_MFC_DIS 0x06
#define GX00_XMISCCTRL_MFC_MAFC 0x02
#define GX00_XMISCCTRL_MFC_PANELLINK 0x04
#define GX00_XMISCCTRL_MFC_DIS 0x06
#define GX00_XMISCCTRL_MFC_MASK 0x06
#define M1064_XMISCCTRL_DAC_6BIT 0x00
#define M1064_XMISCCTRL_DAC_8BIT 0x08
#define M1064_XMISCCTRL_DAC_WIDTHMASK 0x08
#define M1064_XMISCCTRL_LUT_DIS 0x00
#define M1064_XMISCCTRL_LUT_EN 0x10
#define G400_XMISCCTRL_VDO_MAFC12 0x00
#define G400_XMISCCTRL_VDO_BYPASS656 0x40
#define G400_XMISCCTRL_VDO_C2_MAFC12 0x80
#define G400_XMISCCTRL_VDO_C2_BYPASS656 0xC0
#define G400_XMISCCTRL_VDO_MASK 0xE0
#define M1064_XGENIOCTRL 0x2A
#define M1064_XGENIODATA 0x2B
#define DAC1064_XSYSPLLM 0x2C
#define DAC1064_XSYSPLLN 0x2D
#define DAC1064_XSYSPLLP 0x2E
#define DAC1064_XSYSPLLSTAT 0x2F
#define M1064_XZOOMCTRL 0x38
#define M1064_XZOOMCTRL_1 0x00
#define M1064_XZOOMCTRL_2 0x01
#define M1064_XZOOMCTRL_4 0x03
#define M1064_XSENSETEST 0x3A
#define M1064_XSENSETEST_BCOMP 0x01
#define M1064_XSENSETEST_GCOMP 0x02
#define M1064_XSENSETEST_RCOMP 0x04
#define M1064_XSENSETEST_PDOWN 0x00
#define M1064_XSENSETEST_PUP 0x80
#define M1064_XCRCREML 0x3C
#define M1064_XCRCREMH 0x3D
#define M1064_XCRCBITSEL 0x3E
#define M1064_XCOLKEYMASKL 0x40
#define M1064_XCOLKEYMASKH 0x41
#define M1064_XCOLKEYL 0x42
#define M1064_XCOLKEYH 0x43
#define M1064_XPIXPLLAM 0x44
#define M1064_XPIXPLLAN 0x45
#define M1064_XPIXPLLAP 0x46
#define M1064_XPIXPLLBM 0x48
#define M1064_XPIXPLLBN 0x49
#define M1064_XPIXPLLBP 0x4A
#define M1064_XPIXPLLCM 0x4C
#define M1064_XPIXPLLCN 0x4D
#define M1064_XPIXPLLCP 0x4E
#define M1064_XPIXPLLSTAT 0x4F
#define M1064_XTVO_IDX 0x87
#define M1064_XTVO_DATA 0x88
#define M1064_XOUTPUTCONN 0x8A
#define M1064_XSYNCCTRL 0x8B
#define M1064_XVIDPLLSTAT 0x8C
#define M1064_XVIDPLLP 0x8D
#define M1064_XVIDPLLM 0x8E
#define M1064_XVIDPLLN 0x8F
#define M1064_XPWRCTRL 0xA0
[PATCH] matroxfb: fix DVI setup to be more compatible There has been a longstanding problem with the Matrox G450 and perhaps other similar cards, with modes "above" 1280x1024-60 on ppc/ppc64 boxes running Linux. Higher resolutions and/or higher refresh rates resulted in a very noticably "jittery" display, and sometimes no display, depending on the physical monitor. This patch fixes that problem on the systems I have easy access to... I've tested with SLES9SP3 (2.6.5+ kernel) and 2.6.16-rc6 custom kernels on an IBM eServer p5 520 w/G450 (a.k.a GXT135P on IBM's ppc64 systems), and a colleague of mine (Ian Romanick) tested it successfully on an Apple ppc32 box (w/GXT135P). I also tested it on IA32 box I have with a GXT135P to verify that it didn't obviously break anything. In my testing, I covered single-card, single and dual-head setups using both HD15 and DVI-D signals, on both the IA32 and ppc64 boxes. While everything appeared fine on both boxes, I did encounter one problem: I can't get any signal on the DVI-D output on the ppc64 box. However, this is also the case without my patch. I just noticed that screen-blanking only occurs on the primary display as well. Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Signed-off-by: Ian Romanick <idr@us.ibm.com> Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 01:59:51 +04:00
#define M1064_XPWRCTRL_PANELPDN 0x04
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#define M1064_XPANMODE 0xA2
enum POS1064 {
POS1064_XCURADDL=0, POS1064_XCURADDH, POS1064_XCURCTRL,
POS1064_XCURCOL0RED, POS1064_XCURCOL0GREEN, POS1064_XCURCOL0BLUE,
POS1064_XCURCOL1RED, POS1064_XCURCOL1GREEN, POS1064_XCURCOL1BLUE,
POS1064_XCURCOL2RED, POS1064_XCURCOL2GREEN, POS1064_XCURCOL2BLUE,
POS1064_XVREFCTRL, POS1064_XMULCTRL, POS1064_XPIXCLKCTRL, POS1064_XGENCTRL,
POS1064_XMISCCTRL,
POS1064_XGENIOCTRL, POS1064_XGENIODATA, POS1064_XZOOMCTRL, POS1064_XSENSETEST,
POS1064_XCRCBITSEL,
POS1064_XCOLKEYMASKL, POS1064_XCOLKEYMASKH, POS1064_XCOLKEYL, POS1064_XCOLKEYH,
POS1064_XOUTPUTCONN, POS1064_XPANMODE, POS1064_XPWRCTRL };
#endif /* __MATROXFB_DAC1064_H__ */
Reference in New Issue Copy Permalink