iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
f89efd523b
linux/drivers/net/pcnet32.c

2364 lines
72 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* pcnet32.c: An AMD PCnet32 ethernet driver for linux. */
/*
* Copyright 1996-1999 Thomas Bogendoerfer
*
* Derived from the lance driver written 1993,1994,1995 by Donald Becker.
*
* Copyright 1993 United States Government as represented by the
* Director, National Security Agency.
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
* This driver is for PCnet32 and PCnetPCI based ethercards
*/
/**************************************************************************
* 23 Oct, 2000.
* Fixed a few bugs, related to running the controller in 32bit mode.
*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
*
*************************************************************************/
#define DRV_NAME "pcnet32"
[PATCH] pcnet32: fix resource leak with loopback test When running the loopback test, resources are not properly released on completion. This patch frees all transmit resources after running the loopback test. Tested on ia32 and ppc64 hardware. Signed-off-by: Don Fry <brazilnut@us.ibm.com>
2005-04-30 01:51:17 +04:00
#define DRV_VERSION "1.30j"
#define DRV_RELDATE "29.04.2005"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#define PFX DRV_NAME ": "
static const char *version =
DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " tsbogend@alpha.franken.de\n";
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/crc32.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/moduleparam.h>
#include <linux/bitops.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/irq.h>
/*
* PCI device identifiers for "new style" Linux PCI Device Drivers
*/
static struct pci_device_id pcnet32_pci_tbl[] = {
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE_HOME, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
/*
* Adapters that were sold with IBM's RS/6000 or pSeries hardware have
* the incorrect vendor id.
*/
{ PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_AMD_LANCE, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, 0 },
{ 0, }
};
MODULE_DEVICE_TABLE (pci, pcnet32_pci_tbl);
static int cards_found;
/*
* VLB I/O addresses
*/
static unsigned int pcnet32_portlist[] __initdata =
{ 0x300, 0x320, 0x340, 0x360, 0 };
static int pcnet32_debug = 0;
static int tx_start = 1; /* Mapping -- 0:20, 1:64, 2:128, 3:~220 (depends on chip vers) */
static int pcnet32vlb; /* check for VLB cards ? */
static struct net_device *pcnet32_dev;
static int max_interrupt_work = 2;
static int rx_copybreak = 200;
#define PCNET32_PORT_AUI 0x00
#define PCNET32_PORT_10BT 0x01
#define PCNET32_PORT_GPSI 0x02
#define PCNET32_PORT_MII 0x03
#define PCNET32_PORT_PORTSEL 0x03
#define PCNET32_PORT_ASEL 0x04
#define PCNET32_PORT_100 0x40
#define PCNET32_PORT_FD 0x80
#define PCNET32_DMA_MASK 0xffffffff
#define PCNET32_WATCHDOG_TIMEOUT (jiffies + (2 * HZ))
#define PCNET32_BLINK_TIMEOUT (jiffies + (HZ/4))
/*
* table to translate option values from tulip
* to internal options
*/
static unsigned char options_mapping[] = {
PCNET32_PORT_ASEL, /* 0 Auto-select */
PCNET32_PORT_AUI, /* 1 BNC/AUI */
PCNET32_PORT_AUI, /* 2 AUI/BNC */
PCNET32_PORT_ASEL, /* 3 not supported */
PCNET32_PORT_10BT | PCNET32_PORT_FD, /* 4 10baseT-FD */
PCNET32_PORT_ASEL, /* 5 not supported */
PCNET32_PORT_ASEL, /* 6 not supported */
PCNET32_PORT_ASEL, /* 7 not supported */
PCNET32_PORT_ASEL, /* 8 not supported */
PCNET32_PORT_MII, /* 9 MII 10baseT */
PCNET32_PORT_MII | PCNET32_PORT_FD, /* 10 MII 10baseT-FD */
PCNET32_PORT_MII, /* 11 MII (autosel) */
PCNET32_PORT_10BT, /* 12 10BaseT */
PCNET32_PORT_MII | PCNET32_PORT_100, /* 13 MII 100BaseTx */
PCNET32_PORT_MII | PCNET32_PORT_100 | PCNET32_PORT_FD, /* 14 MII 100BaseTx-FD */
PCNET32_PORT_ASEL /* 15 not supported */
};
static const char pcnet32_gstrings_test[][ETH_GSTRING_LEN] = {
"Loopback test (offline)"
};
#define PCNET32_TEST_LEN (sizeof(pcnet32_gstrings_test) / ETH_GSTRING_LEN)
#define PCNET32_NUM_REGS 168
#define MAX_UNITS 8 /* More are supported, limit only on options */
static int options[MAX_UNITS];
static int full_duplex[MAX_UNITS];
static int homepna[MAX_UNITS];
/*
* Theory of Operation
*
* This driver uses the same software structure as the normal lance
* driver. So look for a verbose description in lance.c. The differences
* to the normal lance driver is the use of the 32bit mode of PCnet32
* and PCnetPCI chips. Because these chips are 32bit chips, there is no
* 16MB limitation and we don't need bounce buffers.
*/
/*
* History:
* v0.01: Initial version
* only tested on Alpha Noname Board
* v0.02: changed IRQ handling for new interrupt scheme (dev_id)
* tested on a ASUS SP3G
* v0.10: fixed an odd problem with the 79C974 in a Compaq Deskpro XL
* looks like the 974 doesn't like stopping and restarting in a
* short period of time; now we do a reinit of the lance; the
* bug was triggered by doing ifconfig eth0 <ip> broadcast <addr>
* and hangs the machine (thanks to Klaus Liedl for debugging)
* v0.12: by suggestion from Donald Becker: Renamed driver to pcnet32,
* made it standalone (no need for lance.c)
* v0.13: added additional PCI detecting for special PCI devices (Compaq)
* v0.14: stripped down additional PCI probe (thanks to David C Niemi
* and sveneric@xs4all.nl for testing this on their Compaq boxes)
* v0.15: added 79C965 (VLB) probe
* added interrupt sharing for PCI chips
* v0.16: fixed set_multicast_list on Alpha machines
* v0.17: removed hack from dev.c; now pcnet32 uses ethif_probe in Space.c
* v0.19: changed setting of autoselect bit
* v0.20: removed additional Compaq PCI probe; there is now a working one
* in arch/i386/bios32.c
* v0.21: added endian conversion for ppc, from work by cort@cs.nmt.edu
* v0.22: added printing of status to ring dump
* v0.23: changed enet_statistics to net_devive_stats
* v0.90: added multicast filter
* added module support
* changed irq probe to new style
* added PCnetFast chip id
* added fix for receive stalls with Intel saturn chipsets
* added in-place rx skbs like in the tulip driver
* minor cleanups
* v0.91: added PCnetFast+ chip id
* back port to 2.0.x
* v1.00: added some stuff from Donald Becker's 2.0.34 version
* added support for byte counters in net_dev_stats
* v1.01: do ring dumps, only when debugging the driver
* increased the transmit timeout
* v1.02: fixed memory leak in pcnet32_init_ring()
* v1.10: workaround for stopped transmitter
* added port selection for modules
* detect special T1/E1 WAN card and setup port selection
* v1.11: fixed wrong checking of Tx errors
* v1.20: added check of return value kmalloc (cpeterso@cs.washington.edu)
* added save original kmalloc addr for freeing (mcr@solidum.com)
* added support for PCnetHome chip (joe@MIT.EDU)
* rewritten PCI card detection
* added dwio mode to get driver working on some PPC machines
* v1.21: added mii selection and mii ioctl
* v1.22: changed pci scanning code to make PPC people happy
* fixed switching to 32bit mode in pcnet32_open() (thanks
* to Michael Richard <mcr@solidum.com> for noticing this one)
* added sub vendor/device id matching (thanks again to
* Michael Richard <mcr@solidum.com>)
* added chip id for 79c973/975 (thanks to Zach Brown <zab@zabbo.net>)
* v1.23 fixed small bug, when manual selecting MII speed/duplex
* v1.24 Applied Thomas' patch to use TxStartPoint and thus decrease TxFIFO
* underflows. Added tx_start_pt module parameter. Increased
* TX_RING_SIZE from 16 to 32. Added #ifdef'd code to use DXSUFLO
* for FAST[+] chipsets. <kaf@fc.hp.com>
* v1.24ac Added SMP spinlocking - Alan Cox <alan@redhat.com>
* v1.25kf Added No Interrupt on successful Tx for some Tx's <kaf@fc.hp.com>
* v1.26 Converted to pci_alloc_consistent, Jamey Hicks / George France
* <jamey@crl.dec.com>
* - Fixed a few bugs, related to running the controller in 32bit mode.
* 23 Oct, 2000. Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
* v1.26p Fix oops on rmmod+insmod; plug i/o resource leak - Paul Gortmaker
* v1.27 improved CSR/PROM address detection, lots of cleanups,
* new pcnet32vlb module option, HP-PARISC support,
* added module parameter descriptions,
* initial ethtool support - Helge Deller <deller@gmx.de>
* v1.27a Sun Feb 10 2002 Go Taniguchi <go@turbolinux.co.jp>
* use alloc_etherdev and register_netdev
* fix pci probe not increment cards_found
* FD auto negotiate error workaround for xSeries250
* clean up and using new mii module
* v1.27b Sep 30 2002 Kent Yoder <yoder1@us.ibm.com>
* Added timer for cable connection state changes.
* v1.28 20 Feb 2004 Don Fry <brazilnut@us.ibm.com>
* Jon Mason <jonmason@us.ibm.com>, Chinmay Albal <albal@in.ibm.com>
* Now uses ethtool_ops, netif_msg_* and generic_mii_ioctl.
* Fixes bogus 'Bus master arbitration failure', pci_[un]map_single
* length errors, and transmit hangs. Cleans up after errors in open.
* Jim Lewis <jklewis@us.ibm.com> added ethernet loopback test.
* Thomas Munck Steenholdt <tmus@tmus.dk> non-mii ioctl corrections.
* v1.29 6 Apr 2004 Jim Lewis <jklewis@us.ibm.com> added physical
* identification code (blink led's) and register dump.
* Don Fry added timer for 971/972 so skbufs don't remain on tx ring
* forever.
* v1.30 18 May 2004 Don Fry removed timer and Last Transmit Interrupt
* (ltint) as they added complexity and didn't give good throughput.
* v1.30a 22 May 2004 Don Fry limit frames received during interrupt.
* v1.30b 24 May 2004 Don Fry fix bogus tx carrier errors with 79c973,
* assisted by Bruce Penrod <bmpenrod@endruntechnologies.com>.
* v1.30c 25 May 2004 Don Fry added netif_wake_queue after pcnet32_restart.
* v1.30d 01 Jun 2004 Don Fry discard oversize rx packets.
* v1.30e 11 Jun 2004 Don Fry recover after fifo error and rx hang.
* v1.30f 16 Jun 2004 Don Fry cleanup IRQ to allow 0 and 1 for PCI,
* expanding on suggestions from Ralf Baechle <ralf@linux-mips.org>,
* and Brian Murphy <brian@murphy.dk>.
* v1.30g 22 Jun 2004 Patrick Simmons <psimmons@flash.net> added option
* homepna for selecting HomePNA mode for PCNet/Home 79C978.
* v1.30h 24 Jun 2004 Don Fry correctly select auto, speed, duplex in bcr32.
* v1.30i 28 Jun 2004 Don Fry change to use module_param.
[PATCH] pcnet32: fix resource leak with loopback test When running the loopback test, resources are not properly released on completion. This patch frees all transmit resources after running the loopback test. Tested on ia32 and ppc64 hardware. Signed-off-by: Don Fry <brazilnut@us.ibm.com>
2005-04-30 01:51:17 +04:00
* v1.30j 29 Apr 2005 Don Fry fix skb/map leak with loopback test.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
*/
/*
* Set the number of Tx and Rx buffers, using Log_2(# buffers).
* Reasonable default values are 4 Tx buffers, and 16 Rx buffers.
* That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4).
*/
#ifndef PCNET32_LOG_TX_BUFFERS
#define PCNET32_LOG_TX_BUFFERS 4
#define PCNET32_LOG_RX_BUFFERS 5
#endif
#define TX_RING_SIZE (1 << (PCNET32_LOG_TX_BUFFERS))
#define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
#define TX_RING_LEN_BITS ((PCNET32_LOG_TX_BUFFERS) << 12)
#define RX_RING_SIZE (1 << (PCNET32_LOG_RX_BUFFERS))
#define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
#define RX_RING_LEN_BITS ((PCNET32_LOG_RX_BUFFERS) << 4)
#define PKT_BUF_SZ 1544
/* Offsets from base I/O address. */
#define PCNET32_WIO_RDP 0x10
#define PCNET32_WIO_RAP 0x12
#define PCNET32_WIO_RESET 0x14
#define PCNET32_WIO_BDP 0x16
#define PCNET32_DWIO_RDP 0x10
#define PCNET32_DWIO_RAP 0x14
#define PCNET32_DWIO_RESET 0x18
#define PCNET32_DWIO_BDP 0x1C
#define PCNET32_TOTAL_SIZE 0x20
/* The PCNET32 Rx and Tx ring descriptors. */
struct pcnet32_rx_head {
u32 base;
s16 buf_length;
s16 status;
u32 msg_length;
u32 reserved;
};
struct pcnet32_tx_head {
u32 base;
s16 length;
s16 status;
u32 misc;
u32 reserved;
};
/* The PCNET32 32-Bit initialization block, described in databook. */
struct pcnet32_init_block {
u16 mode;
u16 tlen_rlen;
u8 phys_addr[6];
u16 reserved;
u32 filter[2];
/* Receive and transmit ring base, along with extra bits. */
u32 rx_ring;
u32 tx_ring;
};
/* PCnet32 access functions */
struct pcnet32_access {
u16 (*read_csr)(unsigned long, int);
void (*write_csr)(unsigned long, int, u16);
u16 (*read_bcr)(unsigned long, int);
void (*write_bcr)(unsigned long, int, u16);
u16 (*read_rap)(unsigned long);
void (*write_rap)(unsigned long, u16);
void (*reset)(unsigned long);
};
/*
* The first three fields of pcnet32_private are read by the ethernet device
* so we allocate the structure should be allocated by pci_alloc_consistent().
*/
struct pcnet32_private {
/* The Tx and Rx ring entries must be aligned on 16-byte boundaries in 32bit mode. */
struct pcnet32_rx_head rx_ring[RX_RING_SIZE];
struct pcnet32_tx_head tx_ring[TX_RING_SIZE];
struct pcnet32_init_block init_block;
dma_addr_t dma_addr; /* DMA address of beginning of this
object, returned by
pci_alloc_consistent */
struct pci_dev *pci_dev; /* Pointer to the associated pci device
structure */
const char *name;
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
struct sk_buff *tx_skbuff[TX_RING_SIZE];
struct sk_buff *rx_skbuff[RX_RING_SIZE];
dma_addr_t tx_dma_addr[TX_RING_SIZE];
dma_addr_t rx_dma_addr[RX_RING_SIZE];
struct pcnet32_access a;
spinlock_t lock; /* Guard lock */
unsigned int cur_rx, cur_tx; /* The next free ring entry */
unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */
struct net_device_stats stats;
char tx_full;
int options;
unsigned int shared_irq:1, /* shared irq possible */
dxsuflo:1, /* disable transmit stop on uflo */
mii:1; /* mii port available */
struct net_device *next;
struct mii_if_info mii_if;
struct timer_list watchdog_timer;
struct timer_list blink_timer;
u32 msg_enable; /* debug message level */
};
static void pcnet32_probe_vlbus(void);
static int pcnet32_probe_pci(struct pci_dev *, const struct pci_device_id *);
static int pcnet32_probe1(unsigned long, int, struct pci_dev *);
static int pcnet32_open(struct net_device *);
static int pcnet32_init_ring(struct net_device *);
static int pcnet32_start_xmit(struct sk_buff *, struct net_device *);
static int pcnet32_rx(struct net_device *);
static void pcnet32_tx_timeout (struct net_device *dev);
static irqreturn_t pcnet32_interrupt(int, void *, struct pt_regs *);
static int pcnet32_close(struct net_device *);
static struct net_device_stats *pcnet32_get_stats(struct net_device *);
static void pcnet32_load_multicast(struct net_device *dev);
static void pcnet32_set_multicast_list(struct net_device *);
static int pcnet32_ioctl(struct net_device *, struct ifreq *, int);
static void pcnet32_watchdog(struct net_device *);
static int mdio_read(struct net_device *dev, int phy_id, int reg_num);
static void mdio_write(struct net_device *dev, int phy_id, int reg_num, int val);
static void pcnet32_restart(struct net_device *dev, unsigned int csr0_bits);
static void pcnet32_ethtool_test(struct net_device *dev,
struct ethtool_test *eth_test, u64 *data);
static int pcnet32_loopback_test(struct net_device *dev, uint64_t *data1);
static int pcnet32_phys_id(struct net_device *dev, u32 data);
static void pcnet32_led_blink_callback(struct net_device *dev);
static int pcnet32_get_regs_len(struct net_device *dev);
static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
void *ptr);
[PATCH] pcnet32: fix resource leak with loopback test When running the loopback test, resources are not properly released on completion. This patch frees all transmit resources after running the loopback test. Tested on ia32 and ppc64 hardware. Signed-off-by: Don Fry <brazilnut@us.ibm.com>
2005-04-30 01:51:17 +04:00
static void pcnet32_purge_tx_ring(struct net_device *dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
enum pci_flags_bit {
PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3,
};
static u16 pcnet32_wio_read_csr (unsigned long addr, int index)
{
outw (index, addr+PCNET32_WIO_RAP);
return inw (addr+PCNET32_WIO_RDP);
}
static void pcnet32_wio_write_csr (unsigned long addr, int index, u16 val)
{
outw (index, addr+PCNET32_WIO_RAP);
outw (val, addr+PCNET32_WIO_RDP);
}
static u16 pcnet32_wio_read_bcr (unsigned long addr, int index)
{
outw (index, addr+PCNET32_WIO_RAP);
return inw (addr+PCNET32_WIO_BDP);
}
static void pcnet32_wio_write_bcr (unsigned long addr, int index, u16 val)
{
outw (index, addr+PCNET32_WIO_RAP);
outw (val, addr+PCNET32_WIO_BDP);
}
static u16 pcnet32_wio_read_rap (unsigned long addr)
{
return inw (addr+PCNET32_WIO_RAP);
}
static void pcnet32_wio_write_rap (unsigned long addr, u16 val)
{
outw (val, addr+PCNET32_WIO_RAP);
}
static void pcnet32_wio_reset (unsigned long addr)
{
inw (addr+PCNET32_WIO_RESET);
}
static int pcnet32_wio_check (unsigned long addr)
{
outw (88, addr+PCNET32_WIO_RAP);
return (inw (addr+PCNET32_WIO_RAP) == 88);
}
static struct pcnet32_access pcnet32_wio = {
.read_csr = pcnet32_wio_read_csr,
.write_csr = pcnet32_wio_write_csr,
.read_bcr = pcnet32_wio_read_bcr,
.write_bcr = pcnet32_wio_write_bcr,
.read_rap = pcnet32_wio_read_rap,
.write_rap = pcnet32_wio_write_rap,
.reset = pcnet32_wio_reset
};
static u16 pcnet32_dwio_read_csr (unsigned long addr, int index)
{
outl (index, addr+PCNET32_DWIO_RAP);
return (inl (addr+PCNET32_DWIO_RDP) & 0xffff);
}
static void pcnet32_dwio_write_csr (unsigned long addr, int index, u16 val)
{
outl (index, addr+PCNET32_DWIO_RAP);
outl (val, addr+PCNET32_DWIO_RDP);
}
static u16 pcnet32_dwio_read_bcr (unsigned long addr, int index)
{
outl (index, addr+PCNET32_DWIO_RAP);
return (inl (addr+PCNET32_DWIO_BDP) & 0xffff);
}
static void pcnet32_dwio_write_bcr (unsigned long addr, int index, u16 val)
{
outl (index, addr+PCNET32_DWIO_RAP);
outl (val, addr+PCNET32_DWIO_BDP);
}
static u16 pcnet32_dwio_read_rap (unsigned long addr)
{
return (inl (addr+PCNET32_DWIO_RAP) & 0xffff);
}
static void pcnet32_dwio_write_rap (unsigned long addr, u16 val)
{
outl (val, addr+PCNET32_DWIO_RAP);
}
static void pcnet32_dwio_reset (unsigned long addr)
{
inl (addr+PCNET32_DWIO_RESET);
}
static int pcnet32_dwio_check (unsigned long addr)
{
outl (88, addr+PCNET32_DWIO_RAP);
return ((inl (addr+PCNET32_DWIO_RAP) & 0xffff) == 88);
}
static struct pcnet32_access pcnet32_dwio = {
.read_csr = pcnet32_dwio_read_csr,
.write_csr = pcnet32_dwio_write_csr,
.read_bcr = pcnet32_dwio_read_bcr,
.write_bcr = pcnet32_dwio_write_bcr,
.read_rap = pcnet32_dwio_read_rap,
.write_rap = pcnet32_dwio_write_rap,
.reset = pcnet32_dwio_reset
};
#ifdef CONFIG_NET_POLL_CONTROLLER
static void pcnet32_poll_controller(struct net_device *dev)
{
disable_irq(dev->irq);
pcnet32_interrupt(0, dev, NULL);
enable_irq(dev->irq);
}
#endif
static int pcnet32_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct pcnet32_private *lp = dev->priv;
unsigned long flags;
int r = -EOPNOTSUPP;
if (lp->mii) {
spin_lock_irqsave(&lp->lock, flags);
mii_ethtool_gset(&lp->mii_if, cmd);
spin_unlock_irqrestore(&lp->lock, flags);
r = 0;
}
return r;
}
static int pcnet32_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct pcnet32_private *lp = dev->priv;
unsigned long flags;
int r = -EOPNOTSUPP;
if (lp->mii) {
spin_lock_irqsave(&lp->lock, flags);
r = mii_ethtool_sset(&lp->mii_if, cmd);
spin_unlock_irqrestore(&lp->lock, flags);
}
return r;
}
static void pcnet32_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
struct pcnet32_private *lp = dev->priv;
strcpy (info->driver, DRV_NAME);
strcpy (info->version, DRV_VERSION);
if (lp->pci_dev)
strcpy (info->bus_info, pci_name(lp->pci_dev));
else
sprintf(info->bus_info, "VLB 0x%lx", dev->base_addr);
}
static u32 pcnet32_get_link(struct net_device *dev)
{
struct pcnet32_private *lp = dev->priv;
unsigned long flags;
int r;
spin_lock_irqsave(&lp->lock, flags);
if (lp->mii) {
r = mii_link_ok(&lp->mii_if);
} else {
ulong ioaddr = dev->base_addr; /* card base I/O address */
r = (lp->a.read_bcr(ioaddr, 4) != 0xc0);
}
spin_unlock_irqrestore(&lp->lock, flags);
return r;
}
static u32 pcnet32_get_msglevel(struct net_device *dev)
{
struct pcnet32_private *lp = dev->priv;
return lp->msg_enable;
}
static void pcnet32_set_msglevel(struct net_device *dev, u32 value)
{
struct pcnet32_private *lp = dev->priv;
lp->msg_enable = value;
}
static int pcnet32_nway_reset(struct net_device *dev)
{
struct pcnet32_private *lp = dev->priv;
unsigned long flags;
int r = -EOPNOTSUPP;
if (lp->mii) {
spin_lock_irqsave(&lp->lock, flags);
r = mii_nway_restart(&lp->mii_if);
spin_unlock_irqrestore(&lp->lock, flags);
}
return r;
}
static void pcnet32_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
{
struct pcnet32_private *lp = dev->priv;
ering->tx_max_pending = TX_RING_SIZE - 1;
ering->tx_pending = lp->cur_tx - lp->dirty_tx;
ering->rx_max_pending = RX_RING_SIZE - 1;
ering->rx_pending = lp->cur_rx & RX_RING_MOD_MASK;
}
static void pcnet32_get_strings(struct net_device *dev, u32 stringset, u8 *data)
{
memcpy(data, pcnet32_gstrings_test, sizeof(pcnet32_gstrings_test));
}
static int pcnet32_self_test_count(struct net_device *dev)
{
return PCNET32_TEST_LEN;
}
static void pcnet32_ethtool_test(struct net_device *dev,
struct ethtool_test *test, u64 *data)
{
struct pcnet32_private *lp = dev->priv;
int rc;
if (test->flags == ETH_TEST_FL_OFFLINE) {
rc = pcnet32_loopback_test(dev, data);
if (rc) {
if (netif_msg_hw(lp))
printk(KERN_DEBUG "%s: Loopback test failed.\n", dev->name);
test->flags |= ETH_TEST_FL_FAILED;
} else if (netif_msg_hw(lp))
printk(KERN_DEBUG "%s: Loopback test passed.\n", dev->name);
} else if (netif_msg_hw(lp))
printk(KERN_DEBUG "%s: No tests to run (specify 'Offline' on ethtool).", dev->name);
} /* end pcnet32_ethtool_test */
static int pcnet32_loopback_test(struct net_device *dev, uint64_t *data1)
{
struct pcnet32_private *lp = dev->priv;
struct pcnet32_access *a = &lp->a; /* access to registers */
ulong ioaddr = dev->base_addr; /* card base I/O address */
struct sk_buff *skb; /* sk buff */
int x, i; /* counters */
int numbuffs = 4; /* number of TX/RX buffers and descs */
u16 status = 0x8300; /* TX ring status */
u16 teststatus; /* test of ring status */
int rc; /* return code */
int size; /* size of packets */
unsigned char *packet; /* source packet data */
static int data_len = 60; /* length of source packets */
unsigned long flags;
unsigned long ticks;
*data1 = 1; /* status of test, default to fail */
rc = 1; /* default to fail */
if (netif_running(dev))
pcnet32_close(dev);
spin_lock_irqsave(&lp->lock, flags);
/* Reset the PCNET32 */
lp->a.reset (ioaddr);
/* switch pcnet32 to 32bit mode */
lp->a.write_bcr (ioaddr, 20, 2);
lp->init_block.mode = le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7);
lp->init_block.filter[0] = 0;
lp->init_block.filter[1] = 0;
/* purge & init rings but don't actually restart */
pcnet32_restart(dev, 0x0000);
lp->a.write_csr(ioaddr, 0, 0x0004); /* Set STOP bit */
/* Initialize Transmit buffers. */
size = data_len + 15;
for (x=0; x<numbuffs; x++) {
if (!(skb = dev_alloc_skb(size))) {
if (netif_msg_hw(lp))
printk(KERN_DEBUG "%s: Cannot allocate skb at line: %d!\n",
dev->name, __LINE__);
goto clean_up;
} else {
packet = skb->data;
skb_put(skb, size); /* create space for data */
lp->tx_skbuff[x] = skb;
lp->tx_ring[x].length = le16_to_cpu(-skb->len);
lp->tx_ring[x].misc = 0;
/* put DA and SA into the skb */
for (i=0; i<6; i++)
*packet++ = dev->dev_addr[i];
for (i=0; i<6; i++)
*packet++ = dev->dev_addr[i];
/* type */
*packet++ = 0x08;
*packet++ = 0x06;
/* packet number */
*packet++ = x;
/* fill packet with data */
for (i=0; i<data_len; i++)
*packet++ = i;
lp->tx_dma_addr[x] = pci_map_single(lp->pci_dev, skb->data,
skb->len, PCI_DMA_TODEVICE);
lp->tx_ring[x].base = (u32)le32_to_cpu(lp->tx_dma_addr[x]);
wmb(); /* Make sure owner changes after all others are visible */
lp->tx_ring[x].status = le16_to_cpu(status);
}
}
x = a->read_bcr(ioaddr, 32); /* set internal loopback in BSR32 */
x = x | 0x0002;
a->write_bcr(ioaddr, 32, x);
lp->a.write_csr (ioaddr, 15, 0x0044); /* set int loopback in CSR15 */
teststatus = le16_to_cpu(0x8000);
lp->a.write_csr(ioaddr, 0, 0x0002); /* Set STRT bit */
/* Check status of descriptors */
for (x=0; x<numbuffs; x++) {
ticks = 0;
rmb();
while ((lp->rx_ring[x].status & teststatus) && (ticks < 200)) {
spin_unlock_irqrestore(&lp->lock, flags);
mdelay(1);
spin_lock_irqsave(&lp->lock, flags);
rmb();
ticks++;
}
if (ticks == 200) {
if (netif_msg_hw(lp))
printk("%s: Desc %d failed to reset!\n",dev->name,x);
break;
}
}
lp->a.write_csr(ioaddr, 0, 0x0004); /* Set STOP bit */
wmb();
if (netif_msg_hw(lp) && netif_msg_pktdata(lp)) {
printk(KERN_DEBUG "%s: RX loopback packets:\n", dev->name);
for (x=0; x<numbuffs; x++) {
printk(KERN_DEBUG "%s: Packet %d:\n", dev->name, x);
skb = lp->rx_skbuff[x];
for (i=0; i<size; i++) {
printk("%02x ", *(skb->data+i));
}
printk("\n");
}
}
x = 0;
rc = 0;
while (x<numbuffs && !rc) {
skb = lp->rx_skbuff[x];
packet = lp->tx_skbuff[x]->data;
for (i=0; i<size; i++) {
if (*(skb->data+i) != packet[i]) {
if (netif_msg_hw(lp))
printk(KERN_DEBUG "%s: Error in compare! %2x - %02x %02x\n",
dev->name, i, *(skb->data+i), packet[i]);
rc = 1;
break;
}
}
x++;
}
if (!rc) {
*data1 = 0;
}
clean_up:
[PATCH] pcnet32: fix resource leak with loopback test When running the loopback test, resources are not properly released on completion. This patch frees all transmit resources after running the loopback test. Tested on ia32 and ppc64 hardware. Signed-off-by: Don Fry <brazilnut@us.ibm.com>
2005-04-30 01:51:17 +04:00
pcnet32_purge_tx_ring(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
x = a->read_csr(ioaddr, 15) & 0xFFFF;
a->write_csr(ioaddr, 15, (x & ~0x0044)); /* reset bits 6 and 2 */
x = a->read_bcr(ioaddr, 32); /* reset internal loopback */
x = x & ~0x0002;
a->write_bcr(ioaddr, 32, x);
spin_unlock_irqrestore(&lp->lock, flags);
if (netif_running(dev)) {
pcnet32_open(dev);
} else {
lp->a.write_bcr (ioaddr, 20, 4); /* return to 16bit mode */
}
return(rc);
} /* end pcnet32_loopback_test */
static void pcnet32_led_blink_callback(struct net_device *dev)
{
struct pcnet32_private *lp = dev->priv;
struct pcnet32_access *a = &lp->a;
ulong ioaddr = dev->base_addr;
unsigned long flags;
int i;
spin_lock_irqsave(&lp->lock, flags);
for (i=4; i<8; i++) {
a->write_bcr(ioaddr, i, a->read_bcr(ioaddr, i) ^ 0x4000);
}
spin_unlock_irqrestore(&lp->lock, flags);
mod_timer(&lp->blink_timer, PCNET32_BLINK_TIMEOUT);
}
static int pcnet32_phys_id(struct net_device *dev, u32 data)
{
struct pcnet32_private *lp = dev->priv;
struct pcnet32_access *a = &lp->a;
ulong ioaddr = dev->base_addr;
unsigned long flags;
int i, regs[4];
if (!lp->blink_timer.function) {
init_timer(&lp->blink_timer);
lp->blink_timer.function = (void *) pcnet32_led_blink_callback;
lp->blink_timer.data = (unsigned long) dev;
}
/* Save the current value of the bcrs */
spin_lock_irqsave(&lp->lock, flags);
for (i=4; i<8; i++) {
regs[i-4] = a->read_bcr(ioaddr, i);
}
spin_unlock_irqrestore(&lp->lock, flags);
mod_timer(&lp->blink_timer, jiffies);
set_current_state(TASK_INTERRUPTIBLE);
if ((!data) || (data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)))
data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
[PATCH] net/pcnet32: replace schedule_timeout() with msleep_interruptible() Use msleep_interruptible() instead of schedule_timeout() to guarantee the task delays as expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org>
2005-06-21 01:54:12 +04:00
msleep_interruptible(data * 1000);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
del_timer_sync(&lp->blink_timer);
/* Restore the original value of the bcrs */
spin_lock_irqsave(&lp->lock, flags);
for (i=4; i<8; i++) {
a->write_bcr(ioaddr, i, regs[i-4]);
}
spin_unlock_irqrestore(&lp->lock, flags);
return 0;
}
static int pcnet32_get_regs_len(struct net_device *dev)
{
return(PCNET32_NUM_REGS * sizeof(u16));
}
static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
void *ptr)
{
int i, csr0;
u16 *buff = ptr;
struct pcnet32_private *lp = dev->priv;
struct pcnet32_access *a = &lp->a;
ulong ioaddr = dev->base_addr;
int ticks;
unsigned long flags;
spin_lock_irqsave(&lp->lock, flags);
csr0 = a->read_csr(ioaddr, 0);
if (!(csr0 & 0x0004)) { /* If not stopped */
/* set SUSPEND (SPND) - CSR5 bit 0 */
a->write_csr(ioaddr, 5, 0x0001);
/* poll waiting for bit to be set */
ticks = 0;
while (!(a->read_csr(ioaddr, 5) & 0x0001)) {
spin_unlock_irqrestore(&lp->lock, flags);
mdelay(1);
spin_lock_irqsave(&lp->lock, flags);
ticks++;
if (ticks > 200) {
if (netif_msg_hw(lp))
printk(KERN_DEBUG "%s: Error getting into suspend!\n",
dev->name);
break;
}
}
}
/* read address PROM */
for (i=0; i<16; i += 2)
*buff++ = inw(ioaddr + i);
/* read control and status registers */
for (i=0; i<90; i++) {
*buff++ = a->read_csr(ioaddr, i);
}
*buff++ = a->read_csr(ioaddr, 112);
*buff++ = a->read_csr(ioaddr, 114);
/* read bus configuration registers */
for (i=0; i<36; i++) {
*buff++ = a->read_bcr(ioaddr, i);
}
/* read mii phy registers */
if (lp->mii) {
for (i=0; i<32; i++) {
lp->a.write_bcr(ioaddr, 33, ((lp->mii_if.phy_id) << 5) | i);
*buff++ = lp->a.read_bcr(ioaddr, 34);
}
}
if (!(csr0 & 0x0004)) { /* If not stopped */
/* clear SUSPEND (SPND) - CSR5 bit 0 */
a->write_csr(ioaddr, 5, 0x0000);
}
i = buff - (u16 *)ptr;
for (; i < PCNET32_NUM_REGS; i++)
*buff++ = 0;
spin_unlock_irqrestore(&lp->lock, flags);
}
static struct ethtool_ops pcnet32_ethtool_ops = {
.get_settings = pcnet32_get_settings,
.set_settings = pcnet32_set_settings,
.get_drvinfo = pcnet32_get_drvinfo,
.get_msglevel = pcnet32_get_msglevel,
.set_msglevel = pcnet32_set_msglevel,
.nway_reset = pcnet32_nway_reset,
.get_link = pcnet32_get_link,
.get_ringparam = pcnet32_get_ringparam,
.get_tx_csum = ethtool_op_get_tx_csum,
.get_sg = ethtool_op_get_sg,
.get_tso = ethtool_op_get_tso,
.get_strings = pcnet32_get_strings,
.self_test_count = pcnet32_self_test_count,
.self_test = pcnet32_ethtool_test,
.phys_id = pcnet32_phys_id,
.get_regs_len = pcnet32_get_regs_len,
.get_regs = pcnet32_get_regs,
[PATCH] pcnet32: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to pcnet32. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-12 18:48:57 +04:00
.get_perm_addr = ethtool_op_get_perm_addr,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
};
/* only probes for non-PCI devices, the rest are handled by
* pci_register_driver via pcnet32_probe_pci */
static void __devinit
pcnet32_probe_vlbus(void)
{
unsigned int *port, ioaddr;
/* search for PCnet32 VLB cards at known addresses */
for (port = pcnet32_portlist; (ioaddr = *port); port++) {
if (request_region(ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_vlbus")) {
/* check if there is really a pcnet chip on that ioaddr */
if ((inb(ioaddr + 14) == 0x57) && (inb(ioaddr + 15) == 0x57)) {
pcnet32_probe1(ioaddr, 0, NULL);
} else {
release_region(ioaddr, PCNET32_TOTAL_SIZE);
}
}
}
}
static int __devinit
pcnet32_probe_pci(struct pci_dev *pdev, const struct pci_device_id *ent)
{
unsigned long ioaddr;
int err;
err = pci_enable_device(pdev);
if (err < 0) {
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_ERR PFX "failed to enable device -- err=%d\n", err);
return err;
}
pci_set_master(pdev);
ioaddr = pci_resource_start (pdev, 0);
if (!ioaddr) {
if (pcnet32_debug & NETIF_MSG_PROBE)
printk (KERN_ERR PFX "card has no PCI IO resources, aborting\n");
return -ENODEV;
}
if (!pci_dma_supported(pdev, PCNET32_DMA_MASK)) {
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_ERR PFX "architecture does not support 32bit PCI busmaster DMA\n");
return -ENODEV;
}
if (request_region(ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_pci") == NULL) {
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_ERR PFX "io address range already allocated\n");
return -EBUSY;
}
err = pcnet32_probe1(ioaddr, 1, pdev);
if (err < 0) {
pci_disable_device(pdev);
}
return err;
}
/* pcnet32_probe1
* Called from both pcnet32_probe_vlbus and pcnet_probe_pci.
* pdev will be NULL when called from pcnet32_probe_vlbus.
*/
static int __devinit
pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
{
struct pcnet32_private *lp;
dma_addr_t lp_dma_addr;
int i, media;
int fdx, mii, fset, dxsuflo;
int chip_version;
char *chipname;
struct net_device *dev;
struct pcnet32_access *a = NULL;
u8 promaddr[6];
int ret = -ENODEV;
/* reset the chip */
pcnet32_wio_reset(ioaddr);
/* NOTE: 16-bit check is first, otherwise some older PCnet chips fail */
if (pcnet32_wio_read_csr(ioaddr, 0) == 4 && pcnet32_wio_check(ioaddr)) {
a = &pcnet32_wio;
} else {
pcnet32_dwio_reset(ioaddr);
if (pcnet32_dwio_read_csr(ioaddr, 0) == 4 && pcnet32_dwio_check(ioaddr)) {
a = &pcnet32_dwio;
} else
goto err_release_region;
}
chip_version = a->read_csr(ioaddr, 88) | (a->read_csr(ioaddr,89) << 16);
if ((pcnet32_debug & NETIF_MSG_PROBE) && (pcnet32_debug & NETIF_MSG_HW))
printk(KERN_INFO " PCnet chip version is %#x.\n", chip_version);
if ((chip_version & 0xfff) != 0x003) {
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_INFO PFX "Unsupported chip version.\n");
goto err_release_region;
}
/* initialize variables */
fdx = mii = fset = dxsuflo = 0;
chip_version = (chip_version >> 12) & 0xffff;
switch (chip_version) {
case 0x2420:
chipname = "PCnet/PCI 79C970"; /* PCI */
break;
case 0x2430:
if (shared)
chipname = "PCnet/PCI 79C970"; /* 970 gives the wrong chip id back */
else
chipname = "PCnet/32 79C965"; /* 486/VL bus */
break;
case 0x2621:
chipname = "PCnet/PCI II 79C970A"; /* PCI */
fdx = 1;
break;
case 0x2623:
chipname = "PCnet/FAST 79C971"; /* PCI */
fdx = 1; mii = 1; fset = 1;
break;
case 0x2624:
chipname = "PCnet/FAST+ 79C972"; /* PCI */
fdx = 1; mii = 1; fset = 1;
break;
case 0x2625:
chipname = "PCnet/FAST III 79C973"; /* PCI */
fdx = 1; mii = 1;
break;
case 0x2626:
chipname = "PCnet/Home 79C978"; /* PCI */
fdx = 1;
/*
* This is based on specs published at www.amd.com. This section
* assumes that a card with a 79C978 wants to go into standard
* ethernet mode. The 79C978 can also go into 1Mb HomePNA mode,
* and the module option homepna=1 can select this instead.
*/
media = a->read_bcr(ioaddr, 49);
media &= ~3; /* default to 10Mb ethernet */
if (cards_found < MAX_UNITS && homepna[cards_found])
media |= 1; /* switch to home wiring mode */
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_DEBUG PFX "media set to %sMbit mode.\n",
(media & 1) ? "1" : "10");
a->write_bcr(ioaddr, 49, media);
break;
case 0x2627:
chipname = "PCnet/FAST III 79C975"; /* PCI */
fdx = 1; mii = 1;
break;
case 0x2628:
chipname = "PCnet/PRO 79C976";
fdx = 1; mii = 1;
break;
default:
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_INFO PFX "PCnet version %#x, no PCnet32 chip.\n",
chip_version);
goto err_release_region;
}
/*
* On selected chips turn on the BCR18:NOUFLO bit. This stops transmit
* starting until the packet is loaded. Strike one for reliability, lose
* one for latency - although on PCI this isnt a big loss. Older chips
* have FIFO's smaller than a packet, so you can't do this.
* Turn on BCR18:BurstRdEn and BCR18:BurstWrEn.
*/
if (fset) {
a->write_bcr(ioaddr, 18, (a->read_bcr(ioaddr, 18) | 0x0860));
a->write_csr(ioaddr, 80, (a->read_csr(ioaddr, 80) & 0x0C00) | 0x0c00);
dxsuflo = 1;
}
dev = alloc_etherdev(0);
if (!dev) {
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_ERR PFX "Memory allocation failed.\n");
ret = -ENOMEM;
goto err_release_region;
}
SET_NETDEV_DEV(dev, &pdev->dev);
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_INFO PFX "%s at %#3lx,", chipname, ioaddr);
/* In most chips, after a chip reset, the ethernet address is read from the
* station address PROM at the base address and programmed into the
* "Physical Address Registers" CSR12-14.
* As a precautionary measure, we read the PROM values and complain if
* they disagree with the CSRs. Either way, we use the CSR values, and
* double check that they are valid.
*/
for (i = 0; i < 3; i++) {
unsigned int val;
val = a->read_csr(ioaddr, i+12) & 0x0ffff;
/* There may be endianness issues here. */
dev->dev_addr[2*i] = val & 0x0ff;
dev->dev_addr[2*i+1] = (val >> 8) & 0x0ff;
}
/* read PROM address and compare with CSR address */
for (i = 0; i < 6; i++)
promaddr[i] = inb(ioaddr + i);
if (memcmp(promaddr, dev->dev_addr, 6)
|| !is_valid_ether_addr(dev->dev_addr)) {
#ifndef __powerpc__
if (is_valid_ether_addr(promaddr)) {
#else
if (!is_valid_ether_addr(dev->dev_addr)
&& is_valid_ether_addr(promaddr)) {
#endif
if (pcnet32_debug & NETIF_MSG_PROBE) {
printk(" warning: CSR address invalid,\n");
printk(KERN_INFO " using instead PROM address of");
}
memcpy(dev->dev_addr, promaddr, 6);
}
}
[PATCH] pcnet32: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to pcnet32. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-12 18:48:57 +04:00
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* if the ethernet address is not valid, force to 00:00:00:00:00:00 */
[PATCH] pcnet32: support ETHTOOL_GPERMADDR Add support for ETHTOOL_GPERMADDR to pcnet32. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-12 18:48:57 +04:00
if (!is_valid_ether_addr(dev->perm_addr))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
memset(dev->dev_addr, 0, sizeof(dev->dev_addr));
if (pcnet32_debug & NETIF_MSG_PROBE) {
for (i = 0; i < 6; i++)
printk(" %2.2x", dev->dev_addr[i]);
/* Version 0x2623 and 0x2624 */
if (((chip_version + 1) & 0xfffe) == 0x2624) {
i = a->read_csr(ioaddr, 80) & 0x0C00; /* Check tx_start_pt */
printk("\n" KERN_INFO " tx_start_pt(0x%04x):",i);
switch(i>>10) {
case 0: printk(" 20 bytes,"); break;
case 1: printk(" 64 bytes,"); break;
case 2: printk(" 128 bytes,"); break;
case 3: printk("~220 bytes,"); break;
}
i = a->read_bcr(ioaddr, 18); /* Check Burst/Bus control */
printk(" BCR18(%x):",i&0xffff);
if (i & (1<<5)) printk("BurstWrEn ");
if (i & (1<<6)) printk("BurstRdEn ");
if (i & (1<<7)) printk("DWordIO ");
if (i & (1<<11)) printk("NoUFlow ");
i = a->read_bcr(ioaddr, 25);
printk("\n" KERN_INFO " SRAMSIZE=0x%04x,",i<<8);
i = a->read_bcr(ioaddr, 26);
printk(" SRAM_BND=0x%04x,",i<<8);
i = a->read_bcr(ioaddr, 27);
if (i & (1<<14)) printk("LowLatRx");
}
}
dev->base_addr = ioaddr;
/* pci_alloc_consistent returns page-aligned memory, so we do not have to check the alignment */
if ((lp = pci_alloc_consistent(pdev, sizeof(*lp), &lp_dma_addr)) == NULL) {
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_ERR PFX "Consistent memory allocation failed.\n");
ret = -ENOMEM;
goto err_free_netdev;
}
memset(lp, 0, sizeof(*lp));
lp->dma_addr = lp_dma_addr;
lp->pci_dev = pdev;
spin_lock_init(&lp->lock);
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
dev->priv = lp;
lp->name = chipname;
lp->shared_irq = shared;
lp->mii_if.full_duplex = fdx;
lp->mii_if.phy_id_mask = 0x1f;
lp->mii_if.reg_num_mask = 0x1f;
lp->dxsuflo = dxsuflo;
lp->mii = mii;
lp->msg_enable = pcnet32_debug;
if ((cards_found >= MAX_UNITS) || (options[cards_found] > sizeof(options_mapping)))
lp->options = PCNET32_PORT_ASEL;
else
lp->options = options_mapping[options[cards_found]];
lp->mii_if.dev = dev;
lp->mii_if.mdio_read = mdio_read;
lp->mii_if.mdio_write = mdio_write;
if (fdx && !(lp->options & PCNET32_PORT_ASEL) &&
((cards_found>=MAX_UNITS) || full_duplex[cards_found]))
lp->options |= PCNET32_PORT_FD;
if (!a) {
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_ERR PFX "No access methods\n");
ret = -ENODEV;
goto err_free_consistent;
}
lp->a = *a;
/* detect special T1/E1 WAN card by checking for MAC address */
if (dev->dev_addr[0] == 0x00 && dev->dev_addr[1] == 0xe0
&& dev->dev_addr[2] == 0x75)
lp->options = PCNET32_PORT_FD | PCNET32_PORT_GPSI;
lp->init_block.mode = le16_to_cpu(0x0003); /* Disable Rx and Tx. */
lp->init_block.tlen_rlen = le16_to_cpu(TX_RING_LEN_BITS | RX_RING_LEN_BITS);
for (i = 0; i < 6; i++)
lp->init_block.phys_addr[i] = dev->dev_addr[i];
lp->init_block.filter[0] = 0x00000000;
lp->init_block.filter[1] = 0x00000000;
lp->init_block.rx_ring = (u32)le32_to_cpu(lp->dma_addr +
offsetof(struct pcnet32_private, rx_ring));
lp->init_block.tx_ring = (u32)le32_to_cpu(lp->dma_addr +
offsetof(struct pcnet32_private, tx_ring));
/* switch pcnet32 to 32bit mode */
a->write_bcr(ioaddr, 20, 2);
a->write_csr(ioaddr, 1, (lp->dma_addr + offsetof(struct pcnet32_private,
init_block)) & 0xffff);
a->write_csr(ioaddr, 2, (lp->dma_addr + offsetof(struct pcnet32_private,
init_block)) >> 16);
if (pdev) { /* use the IRQ provided by PCI */
dev->irq = pdev->irq;
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(" assigned IRQ %d.\n", dev->irq);
} else {
unsigned long irq_mask = probe_irq_on();
/*
* To auto-IRQ we enable the initialization-done and DMA error
* interrupts. For ISA boards we get a DMA error, but VLB and PCI
* boards will work.
*/
/* Trigger an initialization just for the interrupt. */
a->write_csr (ioaddr, 0, 0x41);
mdelay (1);
dev->irq = probe_irq_off (irq_mask);
if (!dev->irq) {
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(", failed to detect IRQ line.\n");
ret = -ENODEV;
goto err_free_consistent;
}
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(", probed IRQ %d.\n", dev->irq);
}
/* Set the mii phy_id so that we can query the link state */
if (lp->mii)
lp->mii_if.phy_id = ((lp->a.read_bcr (ioaddr, 33)) >> 5) & 0x1f;
init_timer (&lp->watchdog_timer);
lp->watchdog_timer.data = (unsigned long) dev;
lp->watchdog_timer.function = (void *) &pcnet32_watchdog;
/* The PCNET32-specific entries in the device structure. */
dev->open = &pcnet32_open;
dev->hard_start_xmit = &pcnet32_start_xmit;
dev->stop = &pcnet32_close;
dev->get_stats = &pcnet32_get_stats;
dev->set_multicast_list = &pcnet32_set_multicast_list;
dev->do_ioctl = &pcnet32_ioctl;
dev->ethtool_ops = &pcnet32_ethtool_ops;
dev->tx_timeout = pcnet32_tx_timeout;
dev->watchdog_timeo = (5*HZ);
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = pcnet32_poll_controller;
#endif
/* Fill in the generic fields of the device structure. */
if (register_netdev(dev))
goto err_free_consistent;
if (pdev) {
pci_set_drvdata(pdev, dev);
} else {
lp->next = pcnet32_dev;
pcnet32_dev = dev;
}
if (pcnet32_debug & NETIF_MSG_PROBE)
printk(KERN_INFO "%s: registered as %s\n", dev->name, lp->name);
cards_found++;
/* enable LED writes */
a->write_bcr(ioaddr, 2, a->read_bcr(ioaddr, 2) | 0x1000);
return 0;
err_free_consistent:
pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr);
err_free_netdev:
free_netdev(dev);
err_release_region:
release_region(ioaddr, PCNET32_TOTAL_SIZE);
return ret;
}
static int
pcnet32_open(struct net_device *dev)
{
struct pcnet32_private *lp = dev->priv;
unsigned long ioaddr = dev->base_addr;
u16 val;
int i;
int rc;
unsigned long flags;
if (request_irq(dev->irq, &pcnet32_interrupt,
lp->shared_irq ? SA_SHIRQ : 0, dev->name, (void *)dev)) {
return -EAGAIN;
}
spin_lock_irqsave(&lp->lock, flags);
/* Check for a valid station address */
if (!is_valid_ether_addr(dev->dev_addr)) {
rc = -EINVAL;
goto err_free_irq;
}
/* Reset the PCNET32 */
lp->a.reset (ioaddr);
/* switch pcnet32 to 32bit mode */
lp->a.write_bcr (ioaddr, 20, 2);
if (netif_msg_ifup(lp))
printk(KERN_DEBUG "%s: pcnet32_open() irq %d tx/rx rings %#x/%#x init %#x.\n",
dev->name, dev->irq,
(u32) (lp->dma_addr + offsetof(struct pcnet32_private, tx_ring)),
(u32) (lp->dma_addr + offsetof(struct pcnet32_private, rx_ring)),
(u32) (lp->dma_addr + offsetof(struct pcnet32_private, init_block)));
/* set/reset autoselect bit */
val = lp->a.read_bcr (ioaddr, 2) & ~2;
if (lp->options & PCNET32_PORT_ASEL)
val |= 2;
lp->a.write_bcr (ioaddr, 2, val);
/* handle full duplex setting */
if (lp->mii_if.full_duplex) {
val = lp->a.read_bcr (ioaddr, 9) & ~3;
if (lp->options & PCNET32_PORT_FD) {
val |= 1;
if (lp->options == (PCNET32_PORT_FD | PCNET32_PORT_AUI))
val |= 2;
} else if (lp->options & PCNET32_PORT_ASEL) {
/* workaround of xSeries250, turn on for 79C975 only */
i = ((lp->a.read_csr(ioaddr, 88) |
(lp->a.read_csr(ioaddr,89) << 16)) >> 12) & 0xffff;
if (i == 0x2627)
val |= 3;
}
lp->a.write_bcr (ioaddr, 9, val);
}
/* set/reset GPSI bit in test register */
val = lp->a.read_csr (ioaddr, 124) & ~0x10;
if ((lp->options & PCNET32_PORT_PORTSEL) == PCNET32_PORT_GPSI)
val |= 0x10;
lp->a.write_csr (ioaddr, 124, val);
/* Allied Telesyn AT 2700/2701 FX looses the link, so skip that */
if (lp->pci_dev->subsystem_vendor == PCI_VENDOR_ID_AT &&
(lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
printk(KERN_DEBUG "%s: Skipping PHY selection.\n", dev->name);
} else {
/*
* 24 Jun 2004 according AMD, in order to change the PHY,
* DANAS (or DISPM for 79C976) must be set; then select the speed,
* duplex, and/or enable auto negotiation, and clear DANAS
*/
if (lp->mii && !(lp->options & PCNET32_PORT_ASEL)) {
lp->a.write_bcr(ioaddr, 32,
lp->a.read_bcr(ioaddr, 32) | 0x0080);
/* disable Auto Negotiation, set 10Mpbs, HD */
val = lp->a.read_bcr(ioaddr, 32) & ~0xb8;
if (lp->options & PCNET32_PORT_FD)
val |= 0x10;
if (lp->options & PCNET32_PORT_100)
val |= 0x08;
lp->a.write_bcr (ioaddr, 32, val);
} else {
if (lp->options & PCNET32_PORT_ASEL) {
lp->a.write_bcr(ioaddr, 32,
lp->a.read_bcr(ioaddr, 32) | 0x0080);
/* enable auto negotiate, setup, disable fd */
val = lp->a.read_bcr(ioaddr, 32) & ~0x98;
val |= 0x20;
lp->a.write_bcr(ioaddr, 32, val);
}
}
}
#ifdef DO_DXSUFLO
if (lp->dxsuflo) { /* Disable transmit stop on underflow */
val = lp->a.read_csr (ioaddr, 3);
val |= 0x40;
lp->a.write_csr (ioaddr, 3, val);
}
#endif
lp->init_block.mode = le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7);
pcnet32_load_multicast(dev);
if (pcnet32_init_ring(dev)) {
rc = -ENOMEM;
goto err_free_ring;
}
/* Re-initialize the PCNET32, and start it when done. */
lp->a.write_csr (ioaddr, 1, (lp->dma_addr +
offsetof(struct pcnet32_private, init_block)) & 0xffff);
lp->a.write_csr (ioaddr, 2, (lp->dma_addr +
offsetof(struct pcnet32_private, init_block)) >> 16);
lp->a.write_csr (ioaddr, 4, 0x0915);
lp->a.write_csr (ioaddr, 0, 0x0001);
netif_start_queue(dev);
/* If we have mii, print the link status and start the watchdog */
if (lp->mii) {
mii_check_media (&lp->mii_if, netif_msg_link(lp), 1);
mod_timer (&(lp->watchdog_timer), PCNET32_WATCHDOG_TIMEOUT);
}
i = 0;
while (i++ < 100)
if (lp->a.read_csr (ioaddr, 0) & 0x0100)
break;
/*
* We used to clear the InitDone bit, 0x0100, here but Mark Stockton
* reports that doing so triggers a bug in the '974.
*/
lp->a.write_csr (ioaddr, 0, 0x0042);
if (netif_msg_ifup(lp))
printk(KERN_DEBUG "%s: pcnet32 open after %d ticks, init block %#x csr0 %4.4x.\n",
dev->name, i, (u32) (lp->dma_addr +
offsetof(struct pcnet32_private, init_block)),
lp->a.read_csr(ioaddr, 0));
spin_unlock_irqrestore(&lp->lock, flags);
return 0; /* Always succeed */
err_free_ring:
/* free any allocated skbuffs */
for (i = 0; i < RX_RING_SIZE; i++) {
lp->rx_ring[i].status = 0;
if (lp->rx_skbuff[i]) {
pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], PKT_BUF_SZ-2,
PCI_DMA_FROMDEVICE);
dev_kfree_skb(lp->rx_skbuff[i]);
}
lp->rx_skbuff[i] = NULL;
lp->rx_dma_addr[i] = 0;
}
/*
* Switch back to 16bit mode to avoid problems with dumb
* DOS packet driver after a warm reboot
*/
lp->a.write_bcr (ioaddr, 20, 4);
err_free_irq:
spin_unlock_irqrestore(&lp->lock, flags);
free_irq(dev->irq, dev);
return rc;
}
/*
* The LANCE has been halted for one reason or another (busmaster memory
* arbitration error, Tx FIFO underflow, driver stopped it to reconfigure,
* etc.). Modern LANCE variants always reload their ring-buffer
* configuration when restarted, so we must reinitialize our ring
* context before restarting. As part of this reinitialization,
* find all packets still on the Tx ring and pretend that they had been
* sent (in effect, drop the packets on the floor) - the higher-level
* protocols will time out and retransmit. It'd be better to shuffle
* these skbs to a temp list and then actually re-Tx them after
* restarting the chip, but I'm too lazy to do so right now. dplatt@3do.com
*/
static void
pcnet32_purge_tx_ring(struct net_device *dev)
{
struct pcnet32_private *lp = dev->priv;
int i;
for (i = 0; i < TX_RING_SIZE; i++) {
lp->tx_ring[i].status = 0; /* CPU owns buffer */
wmb(); /* Make sure adapter sees owner change */
if (lp->tx_skbuff[i]) {
pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[i],
lp->tx_skbuff[i]->len, PCI_DMA_TODEVICE);
dev_kfree_skb_any(lp->tx_skbuff[i]);
}
lp->tx_skbuff[i] = NULL;
lp->tx_dma_addr[i] = 0;
}
}
/* Initialize the PCNET32 Rx and Tx rings. */
static int
pcnet32_init_ring(struct net_device *dev)
{
struct pcnet32_private *lp = dev->priv;
int i;
lp->tx_full = 0;
lp->cur_rx = lp->cur_tx = 0;
lp->dirty_rx = lp->dirty_tx = 0;
for (i = 0; i < RX_RING_SIZE; i++) {
struct sk_buff *rx_skbuff = lp->rx_skbuff[i];
if (rx_skbuff == NULL) {
if (!(rx_skbuff = lp->rx_skbuff[i] = dev_alloc_skb (PKT_BUF_SZ))) {
/* there is not much, we can do at this point */
if (pcnet32_debug & NETIF_MSG_DRV)
printk(KERN_ERR "%s: pcnet32_init_ring dev_alloc_skb failed.\n",
dev->name);
return -1;
}
skb_reserve (rx_skbuff, 2);
}
rmb();
if (lp->rx_dma_addr[i] == 0)
[NET]: Remove gratuitous use of skb->tail in network drivers. Many drivers use skb->tail unnecessarily. In these situations, the code roughly looks like: dev = dev_alloc_skb(...); [optional] skb_reserve(skb, ...); ... skb->tail ... But even if the skb_reserve() happens, skb->data equals skb->tail. So it doesn't make any sense to use anything other than skb->data in these cases. Another case was the s2io.c driver directly mucking with the skb->data and skb->tail pointers. It really just wanted to do an skb_reserve(), so that's what the code was changed to do instead. Another reason I'm making this change as it allows some SKB cleanups I have planned simpler to merge. In those cleanups, skb->head, skb->tail, and skb->end pointers are removed, and replaced with skb->head_room and skb->tail_room integers. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2005-06-29 02:25:31 +04:00
lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev, rx_skbuff->data,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
PKT_BUF_SZ-2, PCI_DMA_FROMDEVICE);
lp->rx_ring[i].base = (u32)le32_to_cpu(lp->rx_dma_addr[i]);
lp->rx_ring[i].buf_length = le16_to_cpu(2-PKT_BUF_SZ);
wmb(); /* Make sure owner changes after all others are visible */
lp->rx_ring[i].status = le16_to_cpu(0x8000);
}
/* The Tx buffer address is filled in as needed, but we do need to clear
* the upper ownership bit. */
for (i = 0; i < TX_RING_SIZE; i++) {
lp->tx_ring[i].status = 0; /* CPU owns buffer */
wmb(); /* Make sure adapter sees owner change */
lp->tx_ring[i].base = 0;
lp->tx_dma_addr[i] = 0;
}
lp->init_block.tlen_rlen = le16_to_cpu(TX_RING_LEN_BITS | RX_RING_LEN_BITS);
for (i = 0; i < 6; i++)
lp->init_block.phys_addr[i] = dev->dev_addr[i];
lp->init_block.rx_ring = (u32)le32_to_cpu(lp->dma_addr +
offsetof(struct pcnet32_private, rx_ring));
lp->init_block.tx_ring = (u32)le32_to_cpu(lp->dma_addr +
offsetof(struct pcnet32_private, tx_ring));
wmb(); /* Make sure all changes are visible */
return 0;
}
/* the pcnet32 has been issued a stop or reset. Wait for the stop bit
* then flush the pending transmit operations, re-initialize the ring,
* and tell the chip to initialize.
*/
static void
pcnet32_restart(struct net_device *dev, unsigned int csr0_bits)
{
struct pcnet32_private *lp = dev->priv;
unsigned long ioaddr = dev->base_addr;
int i;
/* wait for stop */
for (i=0; i<100; i++)
if (lp->a.read_csr(ioaddr, 0) & 0x0004)
break;
if (i >= 100 && netif_msg_drv(lp))
printk(KERN_ERR "%s: pcnet32_restart timed out waiting for stop.\n",
dev->name);
pcnet32_purge_tx_ring(dev);
if (pcnet32_init_ring(dev))
return;
/* ReInit Ring */
lp->a.write_csr (ioaddr, 0, 1);
i = 0;
while (i++ < 1000)
if (lp->a.read_csr (ioaddr, 0) & 0x0100)
break;
lp->a.write_csr (ioaddr, 0, csr0_bits);
}
static void
pcnet32_tx_timeout (struct net_device *dev)
{
struct pcnet32_private *lp = dev->priv;
unsigned long ioaddr = dev->base_addr, flags;
spin_lock_irqsave(&lp->lock, flags);
/* Transmitter timeout, serious problems. */
if (pcnet32_debug & NETIF_MSG_DRV)
printk(KERN_ERR "%s: transmit timed out, status %4.4x, resetting.\n",
dev->name, lp->a.read_csr(ioaddr, 0));
lp->a.write_csr (ioaddr, 0, 0x0004);
lp->stats.tx_errors++;
if (netif_msg_tx_err(lp)) {
int i;
printk(KERN_DEBUG " Ring data dump: dirty_tx %d cur_tx %d%s cur_rx %d.",
lp->dirty_tx, lp->cur_tx, lp->tx_full ? " (full)" : "",
lp->cur_rx);
for (i = 0 ; i < RX_RING_SIZE; i++)
printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ",
le32_to_cpu(lp->rx_ring[i].base),
(-le16_to_cpu(lp->rx_ring[i].buf_length)) & 0xffff,
le32_to_cpu(lp->rx_ring[i].msg_length),
le16_to_cpu(lp->rx_ring[i].status));
for (i = 0 ; i < TX_RING_SIZE; i++)
printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ",
le32_to_cpu(lp->tx_ring[i].base),
(-le16_to_cpu(lp->tx_ring[i].length)) & 0xffff,
le32_to_cpu(lp->tx_ring[i].misc),
le16_to_cpu(lp->tx_ring[i].status));
printk("\n");
}
pcnet32_restart(dev, 0x0042);
dev->trans_start = jiffies;
netif_wake_queue(dev);
spin_unlock_irqrestore(&lp->lock, flags);
}
static int
pcnet32_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct pcnet32_private *lp = dev->priv;
unsigned long ioaddr = dev->base_addr;
u16 status;
int entry;
unsigned long flags;
spin_lock_irqsave(&lp->lock, flags);
if (netif_msg_tx_queued(lp)) {
printk(KERN_DEBUG "%s: pcnet32_start_xmit() called, csr0 %4.4x.\n",
dev->name, lp->a.read_csr(ioaddr, 0));
}
/* Default status -- will not enable Successful-TxDone
* interrupt when that option is available to us.
*/
status = 0x8300;
/* Fill in a Tx ring entry */
/* Mask to ring buffer boundary. */
entry = lp->cur_tx & TX_RING_MOD_MASK;
/* Caution: the write order is important here, set the status
* with the "ownership" bits last. */
lp->tx_ring[entry].length = le16_to_cpu(-skb->len);
lp->tx_ring[entry].misc = 0x00000000;
lp->tx_skbuff[entry] = skb;
lp->tx_dma_addr[entry] = pci_map_single(lp->pci_dev, skb->data, skb->len,
PCI_DMA_TODEVICE);
lp->tx_ring[entry].base = (u32)le32_to_cpu(lp->tx_dma_addr[entry]);
wmb(); /* Make sure owner changes after all others are visible */
lp->tx_ring[entry].status = le16_to_cpu(status);
lp->cur_tx++;
lp->stats.tx_bytes += skb->len;
/* Trigger an immediate send poll. */
lp->a.write_csr (ioaddr, 0, 0x0048);
dev->trans_start = jiffies;
if (lp->tx_ring[(entry+1) & TX_RING_MOD_MASK].base != 0) {
lp->tx_full = 1;
netif_stop_queue(dev);
}
spin_unlock_irqrestore(&lp->lock, flags);
return 0;
}
/* The PCNET32 interrupt handler. */
static irqreturn_t
pcnet32_interrupt(int irq, void *dev_id, struct pt_regs * regs)
{
struct net_device *dev = dev_id;
struct pcnet32_private *lp;
unsigned long ioaddr;
u16 csr0,rap;
int boguscnt = max_interrupt_work;
int must_restart;
if (!dev) {
if (pcnet32_debug & NETIF_MSG_INTR)
printk (KERN_DEBUG "%s(): irq %d for unknown device\n",
__FUNCTION__, irq);
return IRQ_NONE;
}
ioaddr = dev->base_addr;
lp = dev->priv;
spin_lock(&lp->lock);
rap = lp->a.read_rap(ioaddr);
while ((csr0 = lp->a.read_csr (ioaddr, 0)) & 0x8f00 && --boguscnt >= 0) {
if (csr0 == 0xffff) {
break; /* PCMCIA remove happened */
}
/* Acknowledge all of the current interrupt sources ASAP. */
lp->a.write_csr (ioaddr, 0, csr0 & ~0x004f);
must_restart = 0;
if (netif_msg_intr(lp))
printk(KERN_DEBUG "%s: interrupt csr0=%#2.2x new csr=%#2.2x.\n",
dev->name, csr0, lp->a.read_csr (ioaddr, 0));
if (csr0 & 0x0400) /* Rx interrupt */
pcnet32_rx(dev);
if (csr0 & 0x0200) { /* Tx-done interrupt */
unsigned int dirty_tx = lp->dirty_tx;
int delta;
while (dirty_tx != lp->cur_tx) {
int entry = dirty_tx & TX_RING_MOD_MASK;
int status = (short)le16_to_cpu(lp->tx_ring[entry].status);
if (status < 0)
break; /* It still hasn't been Txed */
lp->tx_ring[entry].base = 0;
if (status & 0x4000) {
/* There was an major error, log it. */
int err_status = le32_to_cpu(lp->tx_ring[entry].misc);
lp->stats.tx_errors++;
if (netif_msg_tx_err(lp))
printk(KERN_ERR "%s: Tx error status=%04x err_status=%08x\n",
dev->name, status, err_status);
if (err_status & 0x04000000) lp->stats.tx_aborted_errors++;
if (err_status & 0x08000000) lp->stats.tx_carrier_errors++;
if (err_status & 0x10000000) lp->stats.tx_window_errors++;
#ifndef DO_DXSUFLO
if (err_status & 0x40000000) {
lp->stats.tx_fifo_errors++;
/* Ackk! On FIFO errors the Tx unit is turned off! */
/* Remove this verbosity later! */
if (netif_msg_tx_err(lp))
printk(KERN_ERR "%s: Tx FIFO error! CSR0=%4.4x\n",
dev->name, csr0);
must_restart = 1;
}
#else
if (err_status & 0x40000000) {
lp->stats.tx_fifo_errors++;
if (! lp->dxsuflo) { /* If controller doesn't recover ... */
/* Ackk! On FIFO errors the Tx unit is turned off! */
/* Remove this verbosity later! */
if (netif_msg_tx_err(lp))
printk(KERN_ERR "%s: Tx FIFO error! CSR0=%4.4x\n",
dev->name, csr0);
must_restart = 1;
}
}
#endif
} else {
if (status & 0x1800)
lp->stats.collisions++;
lp->stats.tx_packets++;
}
/* We must free the original skb */
if (lp->tx_skbuff[entry]) {
pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[entry],
lp->tx_skbuff[entry]->len, PCI_DMA_TODEVICE);
dev_kfree_skb_irq(lp->tx_skbuff[entry]);
lp->tx_skbuff[entry] = NULL;
lp->tx_dma_addr[entry] = 0;
}
dirty_tx++;
}
delta = (lp->cur_tx - dirty_tx) & (TX_RING_MOD_MASK + TX_RING_SIZE);
if (delta > TX_RING_SIZE) {
if (netif_msg_drv(lp))
printk(KERN_ERR "%s: out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
dev->name, dirty_tx, lp->cur_tx, lp->tx_full);
dirty_tx += TX_RING_SIZE;
delta -= TX_RING_SIZE;
}
if (lp->tx_full &&
netif_queue_stopped(dev) &&
delta < TX_RING_SIZE - 2) {
/* The ring is no longer full, clear tbusy. */
lp->tx_full = 0;
netif_wake_queue (dev);
}
lp->dirty_tx = dirty_tx;
}
/* Log misc errors. */
if (csr0 & 0x4000) lp->stats.tx_errors++; /* Tx babble. */
if (csr0 & 0x1000) {
/*
* this happens when our receive ring is full. This shouldn't
* be a problem as we will see normal rx interrupts for the frames
* in the receive ring. But there are some PCI chipsets (I can
* reproduce this on SP3G with Intel saturn chipset) which have
* sometimes problems and will fill up the receive ring with
* error descriptors. In this situation we don't get a rx
* interrupt, but a missed frame interrupt sooner or later.
* So we try to clean up our receive ring here.
*/
pcnet32_rx(dev);
lp->stats.rx_errors++; /* Missed a Rx frame. */
}
if (csr0 & 0x0800) {
if (netif_msg_drv(lp))
printk(KERN_ERR "%s: Bus master arbitration failure, status %4.4x.\n",
dev->name, csr0);
/* unlike for the lance, there is no restart needed */
}
if (must_restart) {
/* reset the chip to clear the error condition, then restart */
lp->a.reset(ioaddr);
lp->a.write_csr(ioaddr, 4, 0x0915);
pcnet32_restart(dev, 0x0002);
netif_wake_queue(dev);
}
}
/* Set interrupt enable. */
lp->a.write_csr (ioaddr, 0, 0x0040);
lp->a.write_rap (ioaddr,rap);
if (netif_msg_intr(lp))
printk(KERN_DEBUG "%s: exiting interrupt, csr0=%#4.4x.\n",
dev->name, lp->a.read_csr (ioaddr, 0));
spin_unlock(&lp->lock);
return IRQ_HANDLED;
}
static int
pcnet32_rx(struct net_device *dev)
{
struct pcnet32_private *lp = dev->priv;
int entry = lp->cur_rx & RX_RING_MOD_MASK;
int boguscnt = RX_RING_SIZE / 2;
/* If we own the next entry, it's a new packet. Send it up. */
while ((short)le16_to_cpu(lp->rx_ring[entry].status) >= 0) {
int status = (short)le16_to_cpu(lp->rx_ring[entry].status) >> 8;
if (status != 0x03) { /* There was an error. */
/*
* There is a tricky error noted by John Murphy,
* <murf@perftech.com> to Russ Nelson: Even with full-sized
* buffers it's possible for a jabber packet to use two
* buffers, with only the last correctly noting the error.
*/
if (status & 0x01) /* Only count a general error at the */
lp->stats.rx_errors++; /* end of a packet.*/
if (status & 0x20) lp->stats.rx_frame_errors++;
if (status & 0x10) lp->stats.rx_over_errors++;
if (status & 0x08) lp->stats.rx_crc_errors++;
if (status & 0x04) lp->stats.rx_fifo_errors++;
lp->rx_ring[entry].status &= le16_to_cpu(0x03ff);
} else {
/* Malloc up new buffer, compatible with net-2e. */
short pkt_len = (le32_to_cpu(lp->rx_ring[entry].msg_length) & 0xfff)-4;
struct sk_buff *skb;
/* Discard oversize frames. */
if (unlikely(pkt_len > PKT_BUF_SZ - 2)) {
if (netif_msg_drv(lp))
printk(KERN_ERR "%s: Impossible packet size %d!\n",
dev->name, pkt_len);
lp->stats.rx_errors++;
} else if (pkt_len < 60) {
if (netif_msg_rx_err(lp))
printk(KERN_ERR "%s: Runt packet!\n", dev->name);
lp->stats.rx_errors++;
} else {
int rx_in_place = 0;
if (pkt_len > rx_copybreak) {
struct sk_buff *newskb;
if ((newskb = dev_alloc_skb(PKT_BUF_SZ))) {
skb_reserve (newskb, 2);
skb = lp->rx_skbuff[entry];
pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[entry],
PKT_BUF_SZ-2, PCI_DMA_FROMDEVICE);
skb_put (skb, pkt_len);
lp->rx_skbuff[entry] = newskb;
newskb->dev = dev;
lp->rx_dma_addr[entry] =
[NET]: Remove gratuitous use of skb->tail in network drivers. Many drivers use skb->tail unnecessarily. In these situations, the code roughly looks like: dev = dev_alloc_skb(...); [optional] skb_reserve(skb, ...); ... skb->tail ... But even if the skb_reserve() happens, skb->data equals skb->tail. So it doesn't make any sense to use anything other than skb->data in these cases. Another case was the s2io.c driver directly mucking with the skb->data and skb->tail pointers. It really just wanted to do an skb_reserve(), so that's what the code was changed to do instead. Another reason I'm making this change as it allows some SKB cleanups I have planned simpler to merge. In those cleanups, skb->head, skb->tail, and skb->end pointers are removed, and replaced with skb->head_room and skb->tail_room integers. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2005-06-29 02:25:31 +04:00
pci_map_single(lp->pci_dev, newskb->data,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
PKT_BUF_SZ-2, PCI_DMA_FROMDEVICE);
lp->rx_ring[entry].base = le32_to_cpu(lp->rx_dma_addr[entry]);
rx_in_place = 1;
} else
skb = NULL;
} else {
skb = dev_alloc_skb(pkt_len+2);
}
if (skb == NULL) {
int i;
if (netif_msg_drv(lp))
printk(KERN_ERR "%s: Memory squeeze, deferring packet.\n",
dev->name);
for (i = 0; i < RX_RING_SIZE; i++)
if ((short)le16_to_cpu(lp->rx_ring[(entry+i)
& RX_RING_MOD_MASK].status) < 0)
break;
if (i > RX_RING_SIZE -2) {
lp->stats.rx_dropped++;
lp->rx_ring[entry].status |= le16_to_cpu(0x8000);
wmb(); /* Make sure adapter sees owner change */
lp->cur_rx++;
}
break;
}
skb->dev = dev;
if (!rx_in_place) {
skb_reserve(skb,2); /* 16 byte align */
skb_put(skb,pkt_len); /* Make room */
pci_dma_sync_single_for_cpu(lp->pci_dev,
lp->rx_dma_addr[entry],
PKT_BUF_SZ-2,
PCI_DMA_FROMDEVICE);
eth_copy_and_sum(skb,
[NET]: Remove gratuitous use of skb->tail in network drivers. Many drivers use skb->tail unnecessarily. In these situations, the code roughly looks like: dev = dev_alloc_skb(...); [optional] skb_reserve(skb, ...); ... skb->tail ... But even if the skb_reserve() happens, skb->data equals skb->tail. So it doesn't make any sense to use anything other than skb->data in these cases. Another case was the s2io.c driver directly mucking with the skb->data and skb->tail pointers. It really just wanted to do an skb_reserve(), so that's what the code was changed to do instead. Another reason I'm making this change as it allows some SKB cleanups I have planned simpler to merge. In those cleanups, skb->head, skb->tail, and skb->end pointers are removed, and replaced with skb->head_room and skb->tail_room integers. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jgarzik@pobox.com>
2005-06-29 02:25:31 +04:00
(unsigned char *)(lp->rx_skbuff[entry]->data),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
pkt_len,0);
pci_dma_sync_single_for_device(lp->pci_dev,
lp->rx_dma_addr[entry],
PKT_BUF_SZ-2,
PCI_DMA_FROMDEVICE);
}
lp->stats.rx_bytes += skb->len;
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
dev->last_rx = jiffies;
lp->stats.rx_packets++;
}
}
/*
* The docs say that the buffer length isn't touched, but Andrew Boyd
* of QNX reports that some revs of the 79C965 clear it.
*/
lp->rx_ring[entry].buf_length = le16_to_cpu(2-PKT_BUF_SZ);
wmb(); /* Make sure owner changes after all others are visible */
lp->rx_ring[entry].status |= le16_to_cpu(0x8000);
entry = (++lp->cur_rx) & RX_RING_MOD_MASK;
if (--boguscnt <= 0) break; /* don't stay in loop forever */
}
return 0;
}
static int
pcnet32_close(struct net_device *dev)
{
unsigned long ioaddr = dev->base_addr;
struct pcnet32_private *lp = dev->priv;
int i;
unsigned long flags;
del_timer_sync(&lp->watchdog_timer);
netif_stop_queue(dev);
spin_lock_irqsave(&lp->lock, flags);
lp->stats.rx_missed_errors = lp->a.read_csr (ioaddr, 112);
if (netif_msg_ifdown(lp))
printk(KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
dev->name, lp->a.read_csr (ioaddr, 0));
/* We stop the PCNET32 here -- it occasionally polls memory if we don't. */
lp->a.write_csr (ioaddr, 0, 0x0004);
/*
* Switch back to 16bit mode to avoid problems with dumb
* DOS packet driver after a warm reboot
*/
lp->a.write_bcr (ioaddr, 20, 4);
spin_unlock_irqrestore(&lp->lock, flags);
free_irq(dev->irq, dev);
spin_lock_irqsave(&lp->lock, flags);
/* free all allocated skbuffs */
for (i = 0; i < RX_RING_SIZE; i++) {
lp->rx_ring[i].status = 0;
wmb(); /* Make sure adapter sees owner change */
if (lp->rx_skbuff[i]) {
pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], PKT_BUF_SZ-2,
PCI_DMA_FROMDEVICE);
dev_kfree_skb(lp->rx_skbuff[i]);
}
lp->rx_skbuff[i] = NULL;
lp->rx_dma_addr[i] = 0;
}
for (i = 0; i < TX_RING_SIZE; i++) {
lp->tx_ring[i].status = 0; /* CPU owns buffer */
wmb(); /* Make sure adapter sees owner change */
if (lp->tx_skbuff[i]) {
pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[i],
lp->tx_skbuff[i]->len, PCI_DMA_TODEVICE);
dev_kfree_skb(lp->tx_skbuff[i]);
}
lp->tx_skbuff[i] = NULL;
lp->tx_dma_addr[i] = 0;
}
spin_unlock_irqrestore(&lp->lock, flags);
return 0;
}
static struct net_device_stats *
pcnet32_get_stats(struct net_device *dev)
{
struct pcnet32_private *lp = dev->priv;
unsigned long ioaddr = dev->base_addr;
u16 saved_addr;
unsigned long flags;
spin_lock_irqsave(&lp->lock, flags);
saved_addr = lp->a.read_rap(ioaddr);
lp->stats.rx_missed_errors = lp->a.read_csr (ioaddr, 112);
lp->a.write_rap(ioaddr, saved_addr);
spin_unlock_irqrestore(&lp->lock, flags);
return &lp->stats;
}
/* taken from the sunlance driver, which it took from the depca driver */
static void pcnet32_load_multicast (struct net_device *dev)
{
struct pcnet32_private *lp = dev->priv;
volatile struct pcnet32_init_block *ib = &lp->init_block;
volatile u16 *mcast_table = (u16 *)&ib->filter;
struct dev_mc_list *dmi=dev->mc_list;
char *addrs;
int i;
u32 crc;
/* set all multicast bits */
if (dev->flags & IFF_ALLMULTI) {
ib->filter[0] = 0xffffffff;
ib->filter[1] = 0xffffffff;
return;
}
/* clear the multicast filter */
ib->filter[0] = 0;
ib->filter[1] = 0;
/* Add addresses */
for (i = 0; i < dev->mc_count; i++) {
addrs = dmi->dmi_addr;
dmi = dmi->next;
/* multicast address? */
if (!(*addrs & 1))
continue;
crc = ether_crc_le(6, addrs);
crc = crc >> 26;
mcast_table [crc >> 4] = le16_to_cpu(
le16_to_cpu(mcast_table [crc >> 4]) | (1 << (crc & 0xf)));
}
return;
}
/*
* Set or clear the multicast filter for this adaptor.
*/
static void pcnet32_set_multicast_list(struct net_device *dev)
{
unsigned long ioaddr = dev->base_addr, flags;
struct pcnet32_private *lp = dev->priv;
spin_lock_irqsave(&lp->lock, flags);
if (dev->flags&IFF_PROMISC) {
/* Log any net taps. */
if (netif_msg_hw(lp))
printk(KERN_INFO "%s: Promiscuous mode enabled.\n", dev->name);
lp->init_block.mode = le16_to_cpu(0x8000 | (lp->options & PCNET32_PORT_PORTSEL) << 7);
} else {
lp->init_block.mode = le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7);
pcnet32_load_multicast (dev);
}
lp->a.write_csr (ioaddr, 0, 0x0004); /* Temporarily stop the lance. */
pcnet32_restart(dev, 0x0042); /* Resume normal operation */
netif_wake_queue(dev);
spin_unlock_irqrestore(&lp->lock, flags);
}
/* This routine assumes that the lp->lock is held */
static int mdio_read(struct net_device *dev, int phy_id, int reg_num)
{
struct pcnet32_private *lp = dev->priv;
unsigned long ioaddr = dev->base_addr;
u16 val_out;
if (!lp->mii)
return 0;
lp->a.write_bcr(ioaddr, 33, ((phy_id & 0x1f) << 5) | (reg_num & 0x1f));
val_out = lp->a.read_bcr(ioaddr, 34);
return val_out;
}
/* This routine assumes that the lp->lock is held */
static void mdio_write(struct net_device *dev, int phy_id, int reg_num, int val)
{
struct pcnet32_private *lp = dev->priv;
unsigned long ioaddr = dev->base_addr;
if (!lp->mii)
return;
lp->a.write_bcr(ioaddr, 33, ((phy_id & 0x1f) << 5) | (reg_num & 0x1f));
lp->a.write_bcr(ioaddr, 34, val);
}
static int pcnet32_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct pcnet32_private *lp = dev->priv;
int rc;
unsigned long flags;
/* SIOC[GS]MIIxxx ioctls */
if (lp->mii) {
spin_lock_irqsave(&lp->lock, flags);
rc = generic_mii_ioctl(&lp->mii_if, if_mii(rq), cmd, NULL);
spin_unlock_irqrestore(&lp->lock, flags);
} else {
rc = -EOPNOTSUPP;
}
return rc;
}
static void pcnet32_watchdog(struct net_device *dev)
{
struct pcnet32_private *lp = dev->priv;
unsigned long flags;
/* Print the link status if it has changed */
if (lp->mii) {
spin_lock_irqsave(&lp->lock, flags);
mii_check_media (&lp->mii_if, netif_msg_link(lp), 0);
spin_unlock_irqrestore(&lp->lock, flags);
}
mod_timer (&(lp->watchdog_timer), PCNET32_WATCHDOG_TIMEOUT);
}
static void __devexit pcnet32_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
if (dev) {
struct pcnet32_private *lp = dev->priv;
unregister_netdev(dev);
release_region(dev->base_addr, PCNET32_TOTAL_SIZE);
pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr);
free_netdev(dev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
}
}
static struct pci_driver pcnet32_driver = {
.name = DRV_NAME,
.probe = pcnet32_probe_pci,
.remove = __devexit_p(pcnet32_remove_one),
.id_table = pcnet32_pci_tbl,
};
/* An additional parameter that may be passed in... */
static int debug = -1;
static int tx_start_pt = -1;
static int pcnet32_have_pci;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, DRV_NAME " debug level");
module_param(max_interrupt_work, int, 0);
MODULE_PARM_DESC(max_interrupt_work, DRV_NAME " maximum events handled per interrupt");
module_param(rx_copybreak, int, 0);
MODULE_PARM_DESC(rx_copybreak, DRV_NAME " copy breakpoint for copy-only-tiny-frames");
module_param(tx_start_pt, int, 0);
MODULE_PARM_DESC(tx_start_pt, DRV_NAME " transmit start point (0-3)");
module_param(pcnet32vlb, int, 0);
MODULE_PARM_DESC(pcnet32vlb, DRV_NAME " Vesa local bus (VLB) support (0/1)");
module_param_array(options, int, NULL, 0);
MODULE_PARM_DESC(options, DRV_NAME " initial option setting(s) (0-15)");
module_param_array(full_duplex, int, NULL, 0);
MODULE_PARM_DESC(full_duplex, DRV_NAME " full duplex setting(s) (1)");
/* Module Parameter for HomePNA cards added by Patrick Simmons, 2004 */
module_param_array(homepna, int, NULL, 0);
MODULE_PARM_DESC(homepna, DRV_NAME " mode for 79C978 cards (1 for HomePNA, 0 for Ethernet, default Ethernet");
MODULE_AUTHOR("Thomas Bogendoerfer");
MODULE_DESCRIPTION("Driver for PCnet32 and PCnetPCI based ethercards");
MODULE_LICENSE("GPL");
#define PCNET32_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
static int __init pcnet32_init_module(void)
{
printk(KERN_INFO "%s", version);
pcnet32_debug = netif_msg_init(debug, PCNET32_MSG_DEFAULT);
if ((tx_start_pt >= 0) && (tx_start_pt <= 3))
tx_start = tx_start_pt;
/* find the PCI devices */
if (!pci_module_init(&pcnet32_driver))
pcnet32_have_pci = 1;
/* should we find any remaining VLbus devices ? */
if (pcnet32vlb)
pcnet32_probe_vlbus();
if (cards_found && (pcnet32_debug & NETIF_MSG_PROBE))
printk(KERN_INFO PFX "%d cards_found.\n", cards_found);
return (pcnet32_have_pci + cards_found) ? 0 : -ENODEV;
}
static void __exit pcnet32_cleanup_module(void)
{
struct net_device *next_dev;
while (pcnet32_dev) {
struct pcnet32_private *lp = pcnet32_dev->priv;
next_dev = lp->next;
unregister_netdev(pcnet32_dev);
release_region(pcnet32_dev->base_addr, PCNET32_TOTAL_SIZE);
pci_free_consistent(lp->pci_dev, sizeof(*lp), lp, lp->dma_addr);
free_netdev(pcnet32_dev);
pcnet32_dev = next_dev;
}
if (pcnet32_have_pci)
pci_unregister_driver(&pcnet32_driver);
}
module_init(pcnet32_init_module);
module_exit(pcnet32_cleanup_module);
/*
* Local variables:
* c-indent-level: 4
* tab-width: 8
* End:
*/
Reference in New Issue Copy Permalink