iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
f8ab263d4d
linux/drivers/clk/sunxi-ng/ccu_mp.c

330 lines
8.0 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 09:55:01 +03:00
// SPDX-License-Identifier: GPL-2.0-or-later
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
/*
* Copyright (C) 2016 Maxime Ripard
* Maxime Ripard <maxime.ripard@free-electrons.com>
*/
#include <linux/clk-provider.h>
clk: Remove io.h from clk-provider.h Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-19 01:20:22 +03:00
#include <linux/io.h>
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
#include "ccu_gate.h"
#include "ccu_mp.h"
static void ccu_mp_find_best(unsigned long parent, unsigned long rate,
unsigned int max_m, unsigned int max_p,
unsigned int *m, unsigned int *p)
{
unsigned long best_rate = 0;
unsigned int best_m = 0, best_p = 0;
unsigned int _m, _p;
clk: sunxi-ng: div: Allow to set a maximum Some dividers might have a maximum value that is lower than the width of the register. Add a field to _ccu_div to handle those case properly. If the field is set to 0, the code will assume that the maximum value is the maximum one that can be used with the field register width. Otherwise, we'll use whatever value has been set. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-06 13:29:04 +03:00
for (_p = 1; _p <= max_p; _p <<= 1) {
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
for (_m = 1; _m <= max_m; _m++) {
clk: sunxi-ng: div: Allow to set a maximum Some dividers might have a maximum value that is lower than the width of the register. Add a field to _ccu_div to handle those case properly. If the field is set to 0, the code will assume that the maximum value is the maximum one that can be used with the field register width. Otherwise, we'll use whatever value has been set. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-06 13:29:04 +03:00
unsigned long tmp_rate = parent / _p / _m;
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
if (tmp_rate > rate)
continue;
if ((rate - tmp_rate) < (rate - best_rate)) {
best_rate = tmp_rate;
best_m = _m;
best_p = _p;
}
}
}
*m = best_m;
*p = best_p;
}
clk: sunxi-ng: Adjust MP clock parent rate when allowed Currently MP clocks don't consider adjusting parent rate even if they are allowed to do so. Such behaviour considerably lowers amount of possible rates, which is very inconvenient when such clock is used for pixel clock, for example. In order to improve the situation, adjusting parent rate is considered when allowed. This code is inspired by clk_divider_bestdiv() function, which does basically the same thing for different clock type. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-04 21:26:39 +03:00
static unsigned long ccu_mp_find_best_with_parent_adj(struct clk_hw *hw,
unsigned long *parent,
unsigned long rate,
unsigned int max_m,
unsigned int max_p)
{
unsigned long parent_rate_saved;
unsigned long parent_rate, now;
unsigned long best_rate = 0;
unsigned int _m, _p, div;
unsigned long maxdiv;
parent_rate_saved = *parent;
/*
* The maximum divider we can use without overflowing
* unsigned long in rate * m * p below
*/
maxdiv = max_m * max_p;
maxdiv = min(ULONG_MAX / rate, maxdiv);
for (_p = 1; _p <= max_p; _p <<= 1) {
for (_m = 1; _m <= max_m; _m++) {
div = _m * _p;
if (div > maxdiv)
break;
if (rate * div == parent_rate_saved) {
/*
* It's the most ideal case if the requested
* rate can be divided from parent clock without
* needing to change parent rate, so return the
* divider immediately.
*/
*parent = parent_rate_saved;
return rate;
}
parent_rate = clk_hw_round_rate(hw, rate * div);
now = parent_rate / div;
if (now <= rate && now > best_rate) {
best_rate = now;
*parent = parent_rate;
if (now == rate)
return rate;
}
}
}
return best_rate;
}
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
static unsigned long ccu_mp_round_rate(struct ccu_mux_internal *mux,
clk: sunxi-ng: Pass the parent and a pointer to the clocks round rate The clocks might need to modify their parent clocks. In order to make that possible, give them access to the parent clock being evaluated, and to a pointer to the parent rate so that they can modify it if needed. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-05-17 10:40:31 +03:00
struct clk_hw *hw,
unsigned long *parent_rate,
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
unsigned long rate,
void *data)
{
struct ccu_mp *cmp = data;
clk: sunxi-ng: div: Allow to set a maximum Some dividers might have a maximum value that is lower than the width of the register. Add a field to _ccu_div to handle those case properly. If the field is set to 0, the code will assume that the maximum value is the maximum one that can be used with the field register width. Otherwise, we'll use whatever value has been set. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-06 13:29:04 +03:00
unsigned int max_m, max_p;
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
unsigned int m, p;
clk: sunxi-ng: Support fixed post-dividers on MP style clocks On the A64, the MMC module clocks are fixed in the new timing mode, i.e. they do not have a bit to select the mode. These clocks have a 2x divider somewhere between the clock and the MMC module. To be consistent with other SoCs supporting the new timing mode, we model the 2x divider as a fixed post-divider on the MMC module clocks. To do this, we first add fixed post-divider to the MP style clocks, which the MMC module clocks are. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-04 08:19:11 +03:00
if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate *= cmp->fixed_post_div;
clk: sunxi-ng: div: Allow to set a maximum Some dividers might have a maximum value that is lower than the width of the register. Add a field to _ccu_div to handle those case properly. If the field is set to 0, the code will assume that the maximum value is the maximum one that can be used with the field register width. Otherwise, we'll use whatever value has been set. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-06 13:29:04 +03:00
max_m = cmp->m.max ?: 1 << cmp->m.width;
max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
clk: sunxi-ng: mp: fix parent rate change flag check CLK_SET_RATE_PARENT flag is checked on parent clock instead of current one. Fix that. Fixes: 3f790433c3cb ("clk: sunxi-ng: Adjust MP clock parent rate when allowed") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20210209175900.7092-2-jernej.skrabec@siol.net Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-09 20:58:56 +03:00
if (!clk_hw_can_set_rate_parent(&cmp->common.hw)) {
clk: sunxi-ng: Adjust MP clock parent rate when allowed Currently MP clocks don't consider adjusting parent rate even if they are allowed to do so. Such behaviour considerably lowers amount of possible rates, which is very inconvenient when such clock is used for pixel clock, for example. In order to improve the situation, adjusting parent rate is considered when allowed. This code is inspired by clk_divider_bestdiv() function, which does basically the same thing for different clock type. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-04 21:26:39 +03:00
ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m, &p);
rate = *parent_rate / p / m;
} else {
rate = ccu_mp_find_best_with_parent_adj(hw, parent_rate, rate,
max_m, max_p);
}
clk: sunxi-ng: Support fixed post-dividers on MP style clocks On the A64, the MMC module clocks are fixed in the new timing mode, i.e. they do not have a bit to select the mode. These clocks have a 2x divider somewhere between the clock and the MMC module. To be consistent with other SoCs supporting the new timing mode, we model the 2x divider as a fixed post-divider on the MMC module clocks. To do this, we first add fixed post-divider to the MP style clocks, which the MMC module clocks are. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-04 08:19:11 +03:00
if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate /= cmp->fixed_post_div;
clk: sunxi-ng: div: Allow to set a maximum Some dividers might have a maximum value that is lower than the width of the register. Add a field to _ccu_div to handle those case properly. If the field is set to 0, the code will assume that the maximum value is the maximum one that can be used with the field register width. Otherwise, we'll use whatever value has been set. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-06 13:29:04 +03:00
clk: sunxi-ng: Support fixed post-dividers on MP style clocks On the A64, the MMC module clocks are fixed in the new timing mode, i.e. they do not have a bit to select the mode. These clocks have a 2x divider somewhere between the clock and the MMC module. To be consistent with other SoCs supporting the new timing mode, we model the 2x divider as a fixed post-divider on the MMC module clocks. To do this, we first add fixed post-divider to the MP style clocks, which the MMC module clocks are. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-04 08:19:11 +03:00
return rate;
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
}
static void ccu_mp_disable(struct clk_hw *hw)
{
struct ccu_mp *cmp = hw_to_ccu_mp(hw);
return ccu_gate_helper_disable(&cmp->common, cmp->enable);
}
static int ccu_mp_enable(struct clk_hw *hw)
{
struct ccu_mp *cmp = hw_to_ccu_mp(hw);
return ccu_gate_helper_enable(&cmp->common, cmp->enable);
}
static int ccu_mp_is_enabled(struct clk_hw *hw)
{
struct ccu_mp *cmp = hw_to_ccu_mp(hw);
return ccu_gate_helper_is_enabled(&cmp->common, cmp->enable);
}
static unsigned long ccu_mp_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct ccu_mp *cmp = hw_to_ccu_mp(hw);
clk: sunxi-ng: Support fixed post-dividers on MP style clocks On the A64, the MMC module clocks are fixed in the new timing mode, i.e. they do not have a bit to select the mode. These clocks have a 2x divider somewhere between the clock and the MMC module. To be consistent with other SoCs supporting the new timing mode, we model the 2x divider as a fixed post-divider on the MMC module clocks. To do this, we first add fixed post-divider to the MP style clocks, which the MMC module clocks are. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-04 08:19:11 +03:00
unsigned long rate;
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
unsigned int m, p;
u32 reg;
clk: sunxi-ng: mp: Adjust parent rate for pre-dividers The MP style clocks support an mux with pre-dividers. While the driver correctly accounted for them in the .determine_rate callback, it did not in the .recalc_rate and .set_rate callbacks. This means when calculating the factors in the .set_rate callback, they would be off by a factor of the active pre-divider. Same goes for reading back the clock rate after it is set. Cc: stable@vger.kernel.org Fixes: 2ab836db5097 ("clk: sunxi-ng: Add M-P factor clock support") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-14 06:35:22 +03:00
/* Adjust parent_rate according to pre-dividers */
clk: sunxi-ng: mux: Change pre-divider application function prototype The current function name is a bit confusing, and doesn't really allow to create an explicit function to reverse the operation. We also for now change the parent rate through a pointer, while we don't return anything. In order to be less confusing, and easier to use for downstream users, change the function name to something hopefully clearer, and return the adjusted rate instead of changing the pointer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-05-17 10:40:35 +03:00
parent_rate = ccu_mux_helper_apply_prediv(&cmp->common, &cmp->mux, -1,
parent_rate);
clk: sunxi-ng: mp: Adjust parent rate for pre-dividers The MP style clocks support an mux with pre-dividers. While the driver correctly accounted for them in the .determine_rate callback, it did not in the .recalc_rate and .set_rate callbacks. This means when calculating the factors in the .set_rate callback, they would be off by a factor of the active pre-divider. Same goes for reading back the clock rate after it is set. Cc: stable@vger.kernel.org Fixes: 2ab836db5097 ("clk: sunxi-ng: Add M-P factor clock support") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-14 06:35:22 +03:00
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
reg = readl(cmp->common.base + cmp->common.reg);
m = reg >> cmp->m.shift;
m &= (1 << cmp->m.width) - 1;
clk: sunxi-ng: Implement factors offsets The factors we've seen so far all had an offset of one. However, on the earlier Allwinner SoCs, some factors could have no offset at all, meaning that the value computed to reach the rate we want to use was the one we had to program in the registers. Implement an additional field for the factors that can have such an offset (linears, not based on a power of two) to specify that offset. This offset is not linked to the extremums that can be specified in those structures too. The minimum and maximum are representing the range of values we can use to try to compute the best rate. The offset comes later on when we want to set the best value in the registers. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-08 20:12:34 +03:00
m += cmp->m.offset;
if (!m)
m++;
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
p = reg >> cmp->p.shift;
p &= (1 << cmp->p.width) - 1;
clk: sunxi-ng: Support fixed post-dividers on MP style clocks On the A64, the MMC module clocks are fixed in the new timing mode, i.e. they do not have a bit to select the mode. These clocks have a 2x divider somewhere between the clock and the MMC module. To be consistent with other SoCs supporting the new timing mode, we model the 2x divider as a fixed post-divider on the MMC module clocks. To do this, we first add fixed post-divider to the MP style clocks, which the MMC module clocks are. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-04 08:19:11 +03:00
rate = (parent_rate >> p) / m;
if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate /= cmp->fixed_post_div;
return rate;
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
}
static int ccu_mp_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct ccu_mp *cmp = hw_to_ccu_mp(hw);
return ccu_mux_helper_determine_rate(&cmp->common, &cmp->mux,
req, ccu_mp_round_rate, cmp);
}
static int ccu_mp_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct ccu_mp *cmp = hw_to_ccu_mp(hw);
unsigned long flags;
clk: sunxi-ng: div: Allow to set a maximum Some dividers might have a maximum value that is lower than the width of the register. Add a field to _ccu_div to handle those case properly. If the field is set to 0, the code will assume that the maximum value is the maximum one that can be used with the field register width. Otherwise, we'll use whatever value has been set. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-06 13:29:04 +03:00
unsigned int max_m, max_p;
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
unsigned int m, p;
u32 reg;
clk: sunxi-ng: mp: Adjust parent rate for pre-dividers The MP style clocks support an mux with pre-dividers. While the driver correctly accounted for them in the .determine_rate callback, it did not in the .recalc_rate and .set_rate callbacks. This means when calculating the factors in the .set_rate callback, they would be off by a factor of the active pre-divider. Same goes for reading back the clock rate after it is set. Cc: stable@vger.kernel.org Fixes: 2ab836db5097 ("clk: sunxi-ng: Add M-P factor clock support") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-14 06:35:22 +03:00
/* Adjust parent_rate according to pre-dividers */
clk: sunxi-ng: mux: Change pre-divider application function prototype The current function name is a bit confusing, and doesn't really allow to create an explicit function to reverse the operation. We also for now change the parent rate through a pointer, while we don't return anything. In order to be less confusing, and easier to use for downstream users, change the function name to something hopefully clearer, and return the adjusted rate instead of changing the pointer. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-05-17 10:40:35 +03:00
parent_rate = ccu_mux_helper_apply_prediv(&cmp->common, &cmp->mux, -1,
parent_rate);
clk: sunxi-ng: mp: Adjust parent rate for pre-dividers The MP style clocks support an mux with pre-dividers. While the driver correctly accounted for them in the .determine_rate callback, it did not in the .recalc_rate and .set_rate callbacks. This means when calculating the factors in the .set_rate callback, they would be off by a factor of the active pre-divider. Same goes for reading back the clock rate after it is set. Cc: stable@vger.kernel.org Fixes: 2ab836db5097 ("clk: sunxi-ng: Add M-P factor clock support") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-14 06:35:22 +03:00
clk: sunxi-ng: div: Allow to set a maximum Some dividers might have a maximum value that is lower than the width of the register. Add a field to _ccu_div to handle those case properly. If the field is set to 0, the code will assume that the maximum value is the maximum one that can be used with the field register width. Otherwise, we'll use whatever value has been set. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-06 13:29:04 +03:00
max_m = cmp->m.max ?: 1 << cmp->m.width;
max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
clk: sunxi-ng: Support fixed post-dividers on MP style clocks On the A64, the MMC module clocks are fixed in the new timing mode, i.e. they do not have a bit to select the mode. These clocks have a 2x divider somewhere between the clock and the MMC module. To be consistent with other SoCs supporting the new timing mode, we model the 2x divider as a fixed post-divider on the MMC module clocks. To do this, we first add fixed post-divider to the MP style clocks, which the MMC module clocks are. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-04 08:19:11 +03:00
/* Adjust target rate according to post-dividers */
if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate = rate * cmp->fixed_post_div;
clk: sunxi-ng: div: Allow to set a maximum Some dividers might have a maximum value that is lower than the width of the register. Add a field to _ccu_div to handle those case properly. If the field is set to 0, the code will assume that the maximum value is the maximum one that can be used with the field register width. Otherwise, we'll use whatever value has been set. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-06 13:29:04 +03:00
ccu_mp_find_best(parent_rate, rate, max_m, max_p, &m, &p);
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
spin_lock_irqsave(cmp->common.lock, flags);
reg = readl(cmp->common.base + cmp->common.reg);
reg &= ~GENMASK(cmp->m.width + cmp->m.shift - 1, cmp->m.shift);
reg &= ~GENMASK(cmp->p.width + cmp->p.shift - 1, cmp->p.shift);
clk: sunxi-ng: Implement factors offsets The factors we've seen so far all had an offset of one. However, on the earlier Allwinner SoCs, some factors could have no offset at all, meaning that the value computed to reach the rate we want to use was the one we had to program in the registers. Implement an additional field for the factors that can have such an offset (linears, not based on a power of two) to specify that offset. This offset is not linked to the extremums that can be specified in those structures too. The minimum and maximum are representing the range of values we can use to try to compute the best rate. The offset comes later on when we want to set the best value in the registers. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-08 20:12:34 +03:00
reg |= (m - cmp->m.offset) << cmp->m.shift;
reg |= ilog2(p) << cmp->p.shift;
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
clk: sunxi-ng: Implement factors offsets The factors we've seen so far all had an offset of one. However, on the earlier Allwinner SoCs, some factors could have no offset at all, meaning that the value computed to reach the rate we want to use was the one we had to program in the registers. Implement an additional field for the factors that can have such an offset (linears, not based on a power of two) to specify that offset. This offset is not linked to the extremums that can be specified in those structures too. The minimum and maximum are representing the range of values we can use to try to compute the best rate. The offset comes later on when we want to set the best value in the registers. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-08 20:12:34 +03:00
writel(reg, cmp->common.base + cmp->common.reg);
clk: sunxi-ng: Add M-P factor clock support Introduce support for the clocks that combine a linear divider and a power-of-two based one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20160629190535.11855-9-maxime.ripard@free-electrons.com
2016-06-29 22:05:29 +03:00
spin_unlock_irqrestore(cmp->common.lock, flags);
return 0;
}
static u8 ccu_mp_get_parent(struct clk_hw *hw)
{
struct ccu_mp *cmp = hw_to_ccu_mp(hw);
return ccu_mux_helper_get_parent(&cmp->common, &cmp->mux);
}
static int ccu_mp_set_parent(struct clk_hw *hw, u8 index)
{
struct ccu_mp *cmp = hw_to_ccu_mp(hw);
return ccu_mux_helper_set_parent(&cmp->common, &cmp->mux, index);
}
const struct clk_ops ccu_mp_ops = {
.disable = ccu_mp_disable,
.enable = ccu_mp_enable,
.is_enabled = ccu_mp_is_enabled,
.get_parent = ccu_mp_get_parent,
.set_parent = ccu_mp_set_parent,
.determine_rate = ccu_mp_determine_rate,
.recalc_rate = ccu_mp_recalc_rate,
.set_rate = ccu_mp_set_rate,
};
clk: sunxi-ng: Export symbols used by CCU drivers For the individual CCU drivers to be built as modules, the ops structs, helper functions, and callback registration functions must be exported. These symbols are intended for use only by the adjacent CCU drivers, so export them into the SUNXI_CCU namespace. of_sunxi_ccu_probe is not exported because it is only used by built-in OF clock providers. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-2-samuel@sholland.org
2021-11-19 06:33:34 +03:00
EXPORT_SYMBOL_NS_GPL(ccu_mp_ops, SUNXI_CCU);
clk: sunxi-ng: Add MP_MMC clocks that support MMC timing modes switching All of our MMC clocks are of the MP clock type. A few MMC clocks on some SoCs, such as MMC2 on the A83T, support new/old timing mode switching. >From a clock rate point of view, when the new timing mode is active. the output clock rate is halved. This patch adds a special wrapper class of clocks, MP_MMC, around the generic MP type clocks. The rate related callbacks in ccu_mp_mmc_ops for this class look at the timing mode bit and apply the /2 post-divider when needed, before passing it through to the generic class ops, ccu_mp_ops. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-07-24 16:58:57 +03:00
/*
* Support for MMC timing mode switching
*
* The MMC clocks on some SoCs support switching between old and
* new timing modes. A platform specific API is provided to query
* and set the timing mode on supported SoCs.
*
* In addition, a special class of ccu_mp_ops is provided, which
* takes in to account the timing mode switch. When the new timing
* mode is active, the clock output rate is halved. This new class
* is a wrapper around the generic ccu_mp_ops. When clock rates
* are passed through to ccu_mp_ops callbacks, they are doubled
* if the new timing mode bit is set, to account for the post
* divider. Conversely, when clock rates are passed back, they
* are halved if the mode bit is set.
*/
static unsigned long ccu_mp_mmc_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
unsigned long rate = ccu_mp_recalc_rate(hw, parent_rate);
struct ccu_common *cm = hw_to_ccu_common(hw);
u32 val = readl(cm->base + cm->reg);
if (val & CCU_MMC_NEW_TIMING_MODE)
return rate / 2;
return rate;
}
static int ccu_mp_mmc_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
struct ccu_common *cm = hw_to_ccu_common(hw);
u32 val = readl(cm->base + cm->reg);
int ret;
/* adjust the requested clock rate */
if (val & CCU_MMC_NEW_TIMING_MODE) {
req->rate *= 2;
req->min_rate *= 2;
req->max_rate *= 2;
}
ret = ccu_mp_determine_rate(hw, req);
/* re-adjust the requested clock rate back */
if (val & CCU_MMC_NEW_TIMING_MODE) {
req->rate /= 2;
req->min_rate /= 2;
req->max_rate /= 2;
}
return ret;
}
static int ccu_mp_mmc_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct ccu_common *cm = hw_to_ccu_common(hw);
u32 val = readl(cm->base + cm->reg);
if (val & CCU_MMC_NEW_TIMING_MODE)
rate *= 2;
return ccu_mp_set_rate(hw, rate, parent_rate);
}
const struct clk_ops ccu_mp_mmc_ops = {
.disable = ccu_mp_disable,
.enable = ccu_mp_enable,
.is_enabled = ccu_mp_is_enabled,
.get_parent = ccu_mp_get_parent,
.set_parent = ccu_mp_set_parent,
.determine_rate = ccu_mp_mmc_determine_rate,
.recalc_rate = ccu_mp_mmc_recalc_rate,
.set_rate = ccu_mp_mmc_set_rate,
};
clk: sunxi-ng: Export symbols used by CCU drivers For the individual CCU drivers to be built as modules, the ops structs, helper functions, and callback registration functions must be exported. These symbols are intended for use only by the adjacent CCU drivers, so export them into the SUNXI_CCU namespace. of_sunxi_ccu_probe is not exported because it is only used by built-in OF clock providers. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211119033338.25486-2-samuel@sholland.org
2021-11-19 06:33:34 +03:00
EXPORT_SYMBOL_NS_GPL(ccu_mp_mmc_ops, SUNXI_CCU);
Reference in New Issue Copy Permalink