2005-04-17 02:20:36 +04:00
# include <linux/module.h>
# include <linux/sched.h>
# include <linux/ctype.h>
# include <linux/fd.h>
# include <linux/tty.h>
# include <linux/suspend.h>
# include <linux/root_dev.h>
# include <linux/security.h>
# include <linux/delay.h>
2007-05-09 13:33:24 +04:00
# include <linux/genhd.h>
2005-07-13 00:58:07 +04:00
# include <linux/mount.h>
2006-07-18 21:59:59 +04:00
# include <linux/device.h>
2007-05-08 11:24:47 +04:00
# include <linux/init.h>
2008-02-06 12:36:47 +03:00
# include <linux/fs.h>
2008-07-25 12:45:29 +04:00
# include <linux/initrd.h>
2009-01-07 19:45:46 +03:00
# include <linux/async.h>
2009-03-30 03:50:06 +04:00
# include <linux/fs_struct.h>
2005-04-17 02:20:36 +04:00
# include <linux/nfs_fs.h>
# include <linux/nfs_fs_sb.h>
# include <linux/nfs_mount.h>
# include "do_mounts.h"
int __initdata rd_doload ; /* 1 = load RAM disk, 0 = don't load */
[PATCH] vfs: MS_VERBOSE should be MS_SILENT
The meaning of MS_VERBOSE is backwards; if the bit is set, it really means,
"don't be verbose". This is confusing and counter-intuitive.
In addition, there is also no way to set the MS_VERBOSE flag in the
mount(8) program in util-linux, but interesting, it does define options
which would do the right thing if MS_SILENT were defined, which
unfortunately we do not:
#ifdef MS_SILENT
{ "quiet", 0, 0, MS_SILENT }, /* be quiet */
{ "loud", 0, 1, MS_SILENT }, /* print out messages. */
#endif
So the obvious fix is to deprecate the use of MS_VERBOSE and replace it
with MS_SILENT.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 14:15:10 +03:00
int root_mountflags = MS_RDONLY | MS_SILENT ;
2008-07-26 06:46:25 +04:00
static char * __initdata root_device_name ;
2005-04-17 02:20:36 +04:00
static char __initdata saved_root_name [ 64 ] ;
2007-07-16 10:40:35 +04:00
static int __initdata root_wait ;
2005-04-17 02:20:36 +04:00
dev_t ROOT_DEV ;
static int __init load_ramdisk ( char * str )
{
rd_doload = simple_strtol ( str , NULL , 0 ) & 3 ;
return 1 ;
}
__setup ( " load_ramdisk= " , load_ramdisk ) ;
static int __init readonly ( char * str )
{
if ( * str )
return 0 ;
root_mountflags | = MS_RDONLY ;
return 1 ;
}
static int __init readwrite ( char * str )
{
if ( * str )
return 0 ;
root_mountflags & = ~ MS_RDONLY ;
return 1 ;
}
__setup ( " ro " , readonly ) ;
__setup ( " rw " , readwrite ) ;
/*
* Convert a name into device number . We accept the following variants :
*
* 1 ) device number in hexadecimal represents itself
* 2 ) / dev / nfs represents Root_NFS ( 0xff )
* 3 ) / dev / < disk_name > represents the device number of disk
* 4 ) / dev / < disk_name > < decimal > represents the device number
* of partition - device number of disk plus the partition number
* 5 ) / dev / < disk_name > p < decimal > - same as the above , that form is
* used when disk name of partitioned disk ends on a digit .
*
2007-05-22 00:08:01 +04:00
* If name doesn ' t have fall into the categories above , we return ( 0 , 0 ) .
* block_class is used to check if something is a disk name . If the disk
* name contains slashes , the device name has them replaced with
* bangs .
2005-04-17 02:20:36 +04:00
*/
dev_t name_to_dev_t ( char * name )
{
char s [ 32 ] ;
char * p ;
dev_t res = 0 ;
2008-05-07 00:31:33 +04:00
int part ;
2005-04-17 02:20:36 +04:00
if ( strncmp ( name , " /dev/ " , 5 ) ! = 0 ) {
unsigned maj , min ;
if ( sscanf ( name , " %u:%u " , & maj , & min ) = = 2 ) {
res = MKDEV ( maj , min ) ;
if ( maj ! = MAJOR ( res ) | | min ! = MINOR ( res ) )
goto fail ;
} else {
res = new_decode_dev ( simple_strtoul ( name , & p , 16 ) ) ;
if ( * p )
goto fail ;
}
goto done ;
}
2007-05-22 00:08:01 +04:00
2005-04-17 02:20:36 +04:00
name + = 5 ;
res = Root_NFS ;
if ( strcmp ( name , " nfs " ) = = 0 )
goto done ;
res = Root_RAM0 ;
if ( strcmp ( name , " ram " ) = = 0 )
goto done ;
if ( strlen ( name ) > 31 )
goto fail ;
strcpy ( s , name ) ;
for ( p = s ; * p ; p + + )
if ( * p = = ' / ' )
* p = ' ! ' ;
2008-05-07 00:31:33 +04:00
res = blk_lookup_devt ( s , 0 ) ;
if ( res )
goto done ;
/*
* try non - existant , but valid partition , which may only exist
* after revalidating the disk , like partitioned md devices
*/
while ( p > s & & isdigit ( p [ - 1 ] ) )
p - - ;
if ( p = = s | | ! * p | | * p = = ' 0 ' )
goto fail ;
/* try disk name without <part number> */
part = simple_strtoul ( p , NULL , 10 ) ;
* p = ' \0 ' ;
res = blk_lookup_devt ( s , part ) ;
if ( res )
goto done ;
/* try disk name without p<part number> */
if ( p < s + 2 | | ! isdigit ( p [ - 2 ] ) | | p [ - 1 ] ! = ' p ' )
goto fail ;
p [ - 1 ] = ' \0 ' ;
res = blk_lookup_devt ( s , part ) ;
2005-04-17 02:20:36 +04:00
if ( res )
goto done ;
2007-05-22 00:08:01 +04:00
fail :
return 0 ;
2005-04-17 02:20:36 +04:00
done :
return res ;
}
static int __init root_dev_setup ( char * line )
{
strlcpy ( saved_root_name , line , sizeof ( saved_root_name ) ) ;
return 1 ;
}
__setup ( " root= " , root_dev_setup ) ;
2007-07-16 10:40:35 +04:00
static int __init rootwait_setup ( char * str )
{
if ( * str )
return 0 ;
root_wait = 1 ;
return 1 ;
}
__setup ( " rootwait " , rootwait_setup ) ;
2005-04-17 02:20:36 +04:00
static char * __initdata root_mount_data ;
static int __init root_data_setup ( char * str )
{
root_mount_data = str ;
return 1 ;
}
static char * __initdata root_fs_names ;
static int __init fs_names_setup ( char * str )
{
root_fs_names = str ;
return 1 ;
}
static unsigned int __initdata root_delay ;
static int __init root_delay_setup ( char * str )
{
root_delay = simple_strtoul ( str , NULL , 0 ) ;
return 1 ;
}
__setup ( " rootflags= " , root_data_setup ) ;
__setup ( " rootfstype= " , fs_names_setup ) ;
__setup ( " rootdelay= " , root_delay_setup ) ;
static void __init get_fs_names ( char * page )
{
char * s = page ;
if ( root_fs_names ) {
strcpy ( page , root_fs_names ) ;
while ( * s + + ) {
if ( s [ - 1 ] = = ' , ' )
s [ - 1 ] = ' \0 ' ;
}
} else {
int len = get_filesystem_list ( page ) ;
char * p , * next ;
page [ len ] = ' \0 ' ;
for ( p = page - 1 ; p ; p = next ) {
next = strchr ( + + p , ' \n ' ) ;
if ( * p + + ! = ' \t ' )
continue ;
while ( ( * s + + = * p + + ) ! = ' \n ' )
;
s [ - 1 ] = ' \0 ' ;
}
}
* s = ' \0 ' ;
}
static int __init do_mount_root ( char * name , char * fs , int flags , void * data )
{
int err = sys_mount ( name , " /root " , fs , flags , data ) ;
if ( err )
return err ;
sys_chdir ( " /root " ) ;
2008-02-15 06:34:38 +03:00
ROOT_DEV = current - > fs - > pwd . mnt - > mnt_sb - > s_dev ;
2009-01-07 01:40:43 +03:00
printk ( " VFS: Mounted root (%s filesystem)%s on device %u:%u. \n " ,
2008-02-15 06:34:38 +03:00
current - > fs - > pwd . mnt - > mnt_sb - > s_type - > name ,
current - > fs - > pwd . mnt - > mnt_sb - > s_flags & MS_RDONLY ?
2009-01-07 01:40:43 +03:00
" readonly " : " " , MAJOR ( ROOT_DEV ) , MINOR ( ROOT_DEV ) ) ;
2005-04-17 02:20:36 +04:00
return 0 ;
}
void __init mount_block_root ( char * name , int flags )
{
2009-05-16 13:26:20 +04:00
char * fs_names = __getname_gfp ( GFP_KERNEL
| __GFP_NOTRACK_FALSE_POSITIVE ) ;
2005-04-17 02:20:36 +04:00
char * p ;
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 22:45:40 +04:00
# ifdef CONFIG_BLOCK
2005-04-17 02:20:36 +04:00
char b [ BDEVNAME_SIZE ] ;
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 22:45:40 +04:00
# else
const char * b = name ;
# endif
2005-04-17 02:20:36 +04:00
get_fs_names ( fs_names ) ;
retry :
for ( p = fs_names ; * p ; p + = strlen ( p ) + 1 ) {
int err = do_mount_root ( name , p , flags , root_mount_data ) ;
switch ( err ) {
case 0 :
goto out ;
case - EACCES :
flags | = MS_RDONLY ;
goto retry ;
case - EINVAL :
continue ;
}
/*
* Allow the user to distinguish between failed sys_open
* and bad superblock on root device .
2007-05-09 13:33:24 +04:00
* and give them a list of the available devices
2005-04-17 02:20:36 +04:00
*/
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 22:45:40 +04:00
# ifdef CONFIG_BLOCK
2005-04-17 02:20:36 +04:00
__bdevname ( ROOT_DEV , b ) ;
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 22:45:40 +04:00
# endif
2005-04-17 02:20:36 +04:00
printk ( " VFS: Cannot open root device \" %s \" or %s \n " ,
root_device_name , b ) ;
2007-05-09 13:33:24 +04:00
printk ( " Please append a correct \" root= \" boot option; here are the available partitions: \n " ) ;
2005-04-17 02:20:36 +04:00
2007-05-09 13:33:24 +04:00
printk_all_partitions ( ) ;
2008-09-01 15:44:35 +04:00
# ifdef CONFIG_DEBUG_BLOCK_EXT_DEVT
printk ( " DEBUG_BLOCK_EXT_DEVT is enabled, you need to specify "
" explicit textual name for \" root= \" boot option. \n " ) ;
# endif
2005-04-17 02:20:36 +04:00
panic ( " VFS: Unable to mount root fs on %s " , b ) ;
}
2006-05-15 20:44:29 +04:00
2007-05-09 13:33:24 +04:00
printk ( " List of all partitions: \n " ) ;
printk_all_partitions ( ) ;
2006-05-15 20:44:29 +04:00
printk ( " No filesystem could mount root, tried: " ) ;
for ( p = fs_names ; * p ; p + = strlen ( p ) + 1 )
printk ( " %s " , p ) ;
printk ( " \n " ) ;
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 22:45:40 +04:00
# ifdef CONFIG_BLOCK
__bdevname ( ROOT_DEV , b ) ;
# endif
panic ( " VFS: Unable to mount root fs on %s " , b ) ;
2005-04-17 02:20:36 +04:00
out :
putname ( fs_names ) ;
}
# ifdef CONFIG_ROOT_NFS
static int __init mount_nfs_root ( void )
{
void * data = nfs_root_data ( ) ;
2005-06-21 08:15:16 +04:00
create_dev ( " /dev/root " , ROOT_DEV ) ;
2005-04-17 02:20:36 +04:00
if ( data & &
do_mount_root ( " /dev/root " , " nfs " , root_mountflags , data ) = = 0 )
return 1 ;
return 0 ;
}
# endif
# if defined(CONFIG_BLK_DEV_RAM) || defined(CONFIG_BLK_DEV_FD)
void __init change_floppy ( char * fmt , . . . )
{
struct termios termios ;
char buf [ 80 ] ;
char c ;
int fd ;
va_list args ;
va_start ( args , fmt ) ;
vsprintf ( buf , fmt , args ) ;
va_end ( args ) ;
fd = sys_open ( " /dev/root " , O_RDWR | O_NDELAY , 0 ) ;
if ( fd > = 0 ) {
sys_ioctl ( fd , FDEJECT , 0 ) ;
sys_close ( fd ) ;
}
printk ( KERN_NOTICE " VFS: Insert %s and press ENTER \n " , buf ) ;
fd = sys_open ( " /dev/console " , O_RDWR , 0 ) ;
if ( fd > = 0 ) {
sys_ioctl ( fd , TCGETS , ( long ) & termios ) ;
termios . c_lflag & = ~ ICANON ;
sys_ioctl ( fd , TCSETSF , ( long ) & termios ) ;
sys_read ( fd , & c , 1 ) ;
termios . c_lflag | = ICANON ;
sys_ioctl ( fd , TCSETSF , ( long ) & termios ) ;
sys_close ( fd ) ;
}
}
# endif
void __init mount_root ( void )
{
# ifdef CONFIG_ROOT_NFS
if ( MAJOR ( ROOT_DEV ) = = UNNAMED_MAJOR ) {
if ( mount_nfs_root ( ) )
return ;
printk ( KERN_ERR " VFS: Unable to mount root fs via NFS, trying floppy. \n " ) ;
ROOT_DEV = Root_FD0 ;
}
# endif
# ifdef CONFIG_BLK_DEV_FD
if ( MAJOR ( ROOT_DEV ) = = FLOPPY_MAJOR ) {
/* rd_doload is 2 for a dual initrd/ramload setup */
if ( rd_doload = = 2 ) {
if ( rd_load_disk ( 1 ) ) {
ROOT_DEV = Root_RAM1 ;
root_device_name = NULL ;
}
} else
change_floppy ( " root floppy " ) ;
}
# endif
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 22:45:40 +04:00
# ifdef CONFIG_BLOCK
2005-06-21 08:15:16 +04:00
create_dev ( " /dev/root " , ROOT_DEV ) ;
2005-04-17 02:20:36 +04:00
mount_block_root ( " /dev/root " , root_mountflags ) ;
[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 22:45:40 +04:00
# endif
2005-04-17 02:20:36 +04:00
}
/*
* Prepare the namespace - decide what / where to mount , load ramdisks , etc .
*/
void __init prepare_namespace ( void )
{
int is_floppy ;
if ( root_delay ) {
printk ( KERN_INFO " Waiting %dsec before mounting root device... \n " ,
root_delay ) ;
ssleep ( root_delay ) ;
}
2009-02-14 03:59:06 +03:00
/*
* wait for the known devices to complete their probing
*
* Note : this is a potential source of long boot delays .
* For example , it is not atypical to wait 5 seconds here
* for the touchpad of a laptop to initialize .
*/
wait_for_device_probe ( ) ;
2006-07-18 21:59:59 +04:00
2005-04-17 02:20:36 +04:00
md_run_setup ( ) ;
if ( saved_root_name [ 0 ] ) {
root_device_name = saved_root_name ;
2008-01-31 18:25:00 +03:00
if ( ! strncmp ( root_device_name , " mtd " , 3 ) | |
! strncmp ( root_device_name , " ubi " , 3 ) ) {
2006-05-30 16:25:46 +04:00
mount_block_root ( root_device_name , root_mountflags ) ;
goto out ;
}
2005-04-17 02:20:36 +04:00
ROOT_DEV = name_to_dev_t ( root_device_name ) ;
if ( strncmp ( root_device_name , " /dev/ " , 5 ) = = 0 )
root_device_name + = 5 ;
}
if ( initrd_load ( ) )
goto out ;
2007-07-16 10:40:35 +04:00
/* wait for any asynchronous scanning to complete */
if ( ( ROOT_DEV = = 0 ) & & root_wait ) {
printk ( KERN_INFO " Waiting for root device %s... \n " ,
saved_root_name ) ;
while ( driver_probe_done ( ) ! = 0 | |
( ROOT_DEV = name_to_dev_t ( saved_root_name ) ) = = 0 )
msleep ( 100 ) ;
2009-02-14 03:59:06 +03:00
async_synchronize_full ( ) ;
2007-07-16 10:40:35 +04:00
}
is_floppy = MAJOR ( ROOT_DEV ) = = FLOPPY_MAJOR ;
2005-04-17 02:20:36 +04:00
if ( is_floppy & & rd_doload & & rd_load_disk ( 0 ) )
ROOT_DEV = Root_RAM0 ;
mount_root ( ) ;
out :
Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev
Devtmpfs lets the kernel create a tmpfs instance called devtmpfs
very early at kernel initialization, before any driver-core device
is registered. Every device with a major/minor will provide a
device node in devtmpfs.
Devtmpfs can be changed and altered by userspace at any time,
and in any way needed - just like today's udev-mounted tmpfs.
Unmodified udev versions will run just fine on top of it, and will
recognize an already existing kernel-created device node and use it.
The default node permissions are root:root 0600. Proper permissions
and user/group ownership, meaningful symlinks, all other policy still
needs to be applied by userspace.
If a node is created by devtmps, devtmpfs will remove the device node
when the device goes away. If the device node was created by
userspace, or the devtmpfs created node was replaced by userspace, it
will no longer be removed by devtmpfs.
If it is requested to auto-mount it, it makes init=/bin/sh work
without any further userspace support. /dev will be fully populated
and dynamic, and always reflect the current device state of the kernel.
With the commonly used dynamic device numbers, it solves the problem
where static devices nodes may point to the wrong devices.
It is intended to make the initial bootup logic simpler and more robust,
by de-coupling the creation of the inital environment, to reliably run
userspace processes, from a complex userspace bootstrap logic to provide
a working /dev.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Tested-By: Harald Hoyer <harald@redhat.com>
Tested-By: Scott James Remnant <scott@ubuntu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 17:23:42 +04:00
devtmpfs_mount ( " dev " ) ;
2005-04-17 02:20:36 +04:00
sys_mount ( " . " , " / " , NULL , MS_MOVE , NULL ) ;
sys_chroot ( " . " ) ;
}