License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
// SPDX-License-Identifier: GPL-2.0
2013-02-28 05:03:03 +04:00
/*
* linux / fs / hfsplus / xattr . c
*
* Vyacheslav Dubeyko < slava @ dubeyko . com >
*
* Logic of processing extended attributes
*/
# include "hfsplus_fs.h"
hfsplus: fix worst-case unicode to char conversion of file names and attributes
This is a series of 3 patches which corrects issues in HFS+ concerning
the use of non-english file names and attributes. Names and attributes
are stored internally as UTF-16 units up to a fixed maximum size, and
convert to and from user-representation by NLS. The code incorrectly
assume that NLS string lengths are equal to unicode lengths, which is
only true for English ascii usage.
This patch (of 3):
The HFS Plus Volume Format specification (TN1150) states that file names
are stored internally as a maximum of 255 unicode characters, as defined
by The Unicode Standard, Version 2.0 [Unicode, Inc. ISBN
0-201-48345-9]. File names are converted by the NLS system on Linux
before presented to the user.
255 CJK characters converts to UTF-8 with 1 unicode character to up to 3
bytes, and to GB18030 with 1 unicode character to up to 4 bytes. Thus,
trying in a UTF-8 locale to list files with names of more than 85 CJK
characters results in:
$ ls /mnt
ls: reading directory /mnt: File name too long
The receiving buffer to hfsplus_uni2asc() needs to be 255 x
NLS_MAX_CHARSET_SIZE bytes, not 255 bytes as the code has always been.
Similar consideration applies to attributes, which are stored internally
as a maximum of 127 UTF-16BE units. See XNU source for an up-to-date
reference on attributes.
Strictly speaking, the maximum value of NLS_MAX_CHARSET_SIZE = 6 is not
attainable in the case of conversion to UTF-8, as going beyond 3 bytes
requires the use of surrogate pairs, i.e. consuming two input units.
Thanks Anton Altaparmakov for reviewing an earlier version of this
change.
This patch fixes all callers of hfsplus_uni2asc(), and also enables the
use of long non-English file names in HFS+. The getting and setting,
and general usage of long non-English attributes requires further
forthcoming work, in the following patches of this series.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Sougata Santra <sougata@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 01:36:21 +04:00
# include <linux/nls.h>
2013-02-28 05:03:03 +04:00
# include "xattr.h"
2014-01-30 11:59:19 +04:00
static int hfsplus_removexattr ( struct inode * inode , const char * name ) ;
2013-02-28 05:03:03 +04:00
const struct xattr_handler * hfsplus_xattr_handlers [ ] = {
& hfsplus_xattr_osx_handler ,
& hfsplus_xattr_user_handler ,
& hfsplus_xattr_trusted_handler ,
& hfsplus_xattr_security_handler ,
NULL
} ;
static int strcmp_xattr_finder_info ( const char * name )
{
if ( name ) {
return strncmp ( name , HFSPLUS_XATTR_FINDER_INFO_NAME ,
sizeof ( HFSPLUS_XATTR_FINDER_INFO_NAME ) ) ;
}
return - 1 ;
}
static int strcmp_xattr_acl ( const char * name )
{
if ( name ) {
return strncmp ( name , HFSPLUS_XATTR_ACL_NAME ,
sizeof ( HFSPLUS_XATTR_ACL_NAME ) ) ;
}
return - 1 ;
}
2015-04-16 22:47:07 +03:00
static bool is_known_namespace ( const char * name )
2013-02-28 05:03:03 +04:00
{
if ( strncmp ( name , XATTR_SYSTEM_PREFIX , XATTR_SYSTEM_PREFIX_LEN ) & &
strncmp ( name , XATTR_USER_PREFIX , XATTR_USER_PREFIX_LEN ) & &
strncmp ( name , XATTR_SECURITY_PREFIX , XATTR_SECURITY_PREFIX_LEN ) & &
strncmp ( name , XATTR_TRUSTED_PREFIX , XATTR_TRUSTED_PREFIX_LEN ) )
return false ;
return true ;
}
2013-11-13 03:11:08 +04:00
static void hfsplus_init_header_node ( struct inode * attr_file ,
u32 clump_size ,
2013-11-15 02:32:18 +04:00
char * buf , u16 node_size )
2013-11-13 03:11:08 +04:00
{
struct hfs_bnode_desc * desc ;
struct hfs_btree_header_rec * head ;
u16 offset ;
__be16 * rec_offsets ;
u32 hdr_node_map_rec_bits ;
char * bmp ;
u32 used_nodes ;
u32 used_bmp_bytes ;
hfsplus: fix compiler warning on PowerPC
Commit a99b7069aab8 ("hfsplus: Fix undefined __divdi3 in
hfsplus_init_header_node()") introduced do_div() to xattr.c and the
warning below too.
As Geert remarked: "tmp" is "loff_t" which is "__kernel_loff_t", which
is "long long", i.e. signed, while include/asm-generic/div64.h compares
its type with "uint64_t". As inode sizes are positive, it should be
safe to change the type of "tmp" to "u64".
In file included from
arch/powerpc/include/asm/div64.h:1:0,
from include/linux/kernel.h:124,
from include/asm-generic/bug.h:13,
from arch/powerpc/include/asm/bug.h:127,
from include/linux/bug.h:4,
from include/linux/thread_info.h:11,
from include/asm-generic/preempt.h:4,
from arch/powerpc/include/generated/asm/preempt.h:1,
from include/linux/preempt.h:18,
from include/linux/spinlock.h:50,
from include/linux/wait.h:8,
from include/linux/fs.h:6,
from fs/hfsplus/hfsplus_fs.h:19,
from fs/hfsplus/xattr.c:9:
fs/hfsplus/xattr.c: In function 'hfsplus_init_header_node':
include/asm-generic/div64.h:43:28: warning: comparison of distinct pointer types lacks a cast [enabled by default]
(void)(((typeof((n)) *)0) == ((uint64_t *)0)); \
^
fs/hfsplus/xattr.c:86:2: note: in expansion of macro 'do_div'
do_div(tmp, node_size);
^
Signed-off-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 01:36:32 +04:00
u64 tmp ;
2013-11-13 03:11:08 +04:00
2013-11-15 02:32:18 +04:00
hfs_dbg ( ATTR_MOD , " init_hdr_attr_file: clump %u, node_size %u \n " ,
2014-06-07 01:36:31 +04:00
clump_size , node_size ) ;
2013-11-13 03:11:08 +04:00
/* The end of the node contains list of record offsets */
rec_offsets = ( __be16 * ) ( buf + node_size ) ;
desc = ( struct hfs_bnode_desc * ) buf ;
desc - > type = HFS_NODE_HEADER ;
desc - > num_recs = cpu_to_be16 ( HFSPLUS_BTREE_HDR_NODE_RECS_COUNT ) ;
offset = sizeof ( struct hfs_bnode_desc ) ;
* - - rec_offsets = cpu_to_be16 ( offset ) ;
head = ( struct hfs_btree_header_rec * ) ( buf + offset ) ;
head - > node_size = cpu_to_be16 ( node_size ) ;
2013-11-15 02:32:18 +04:00
tmp = i_size_read ( attr_file ) ;
do_div ( tmp , node_size ) ;
head - > node_count = cpu_to_be32 ( tmp ) ;
2013-11-13 03:11:08 +04:00
head - > free_nodes = cpu_to_be32 ( be32_to_cpu ( head - > node_count ) - 1 ) ;
head - > clump_size = cpu_to_be32 ( clump_size ) ;
head - > attributes | = cpu_to_be32 ( HFS_TREE_BIGKEYS | HFS_TREE_VARIDXKEYS ) ;
head - > max_key_len = cpu_to_be16 ( HFSPLUS_ATTR_KEYLEN - sizeof ( u16 ) ) ;
offset + = sizeof ( struct hfs_btree_header_rec ) ;
* - - rec_offsets = cpu_to_be16 ( offset ) ;
offset + = HFSPLUS_BTREE_HDR_USER_BYTES ;
* - - rec_offsets = cpu_to_be16 ( offset ) ;
hdr_node_map_rec_bits = 8 * ( node_size - offset - ( 4 * sizeof ( u16 ) ) ) ;
if ( be32_to_cpu ( head - > node_count ) > hdr_node_map_rec_bits ) {
u32 map_node_bits ;
u32 map_nodes ;
desc - > next = cpu_to_be32 ( be32_to_cpu ( head - > leaf_tail ) + 1 ) ;
map_node_bits = 8 * ( node_size - sizeof ( struct hfs_bnode_desc ) -
( 2 * sizeof ( u16 ) ) - 2 ) ;
map_nodes = ( be32_to_cpu ( head - > node_count ) -
hdr_node_map_rec_bits +
( map_node_bits - 1 ) ) / map_node_bits ;
be32_add_cpu ( & head - > free_nodes , 0 - map_nodes ) ;
}
bmp = buf + offset ;
used_nodes =
be32_to_cpu ( head - > node_count ) - be32_to_cpu ( head - > free_nodes ) ;
used_bmp_bytes = used_nodes / 8 ;
if ( used_bmp_bytes ) {
memset ( bmp , 0xFF , used_bmp_bytes ) ;
bmp + = used_bmp_bytes ;
used_nodes % = 8 ;
}
* bmp = ~ ( 0xFF > > used_nodes ) ;
offset + = hdr_node_map_rec_bits / 8 ;
* - - rec_offsets = cpu_to_be16 ( offset ) ;
}
2013-11-13 03:11:09 +04:00
static int hfsplus_create_attributes_file ( struct super_block * sb )
{
int err = 0 ;
struct hfsplus_sb_info * sbi = HFSPLUS_SB ( sb ) ;
struct inode * attr_file ;
struct hfsplus_inode_info * hip ;
u32 clump_size ;
u16 node_size = HFSPLUS_ATTR_TREE_NODE_SIZE ;
char * buf ;
int index , written ;
struct address_space * mapping ;
struct page * page ;
int old_state = HFSPLUS_EMPTY_ATTR_TREE ;
hfs_dbg ( ATTR_MOD , " create_attr_file: ino %d \n " , HFSPLUS_ATTR_CNID ) ;
check_attr_tree_state_again :
switch ( atomic_read ( & sbi - > attr_tree_state ) ) {
case HFSPLUS_EMPTY_ATTR_TREE :
if ( old_state ! = atomic_cmpxchg ( & sbi - > attr_tree_state ,
old_state ,
HFSPLUS_CREATING_ATTR_TREE ) )
goto check_attr_tree_state_again ;
break ;
case HFSPLUS_CREATING_ATTR_TREE :
/*
* This state means that another thread is in process
* of AttributesFile creation . Theoretically , it is
* possible to be here . But really __setxattr ( ) method
* first of all calls hfs_find_init ( ) for lookup in
* B - tree of CatalogFile . This method locks mutex of
* CatalogFile ' s B - tree . As a result , if some thread
* is inside AttributedFile creation operation then
* another threads will be waiting unlocking of
* CatalogFile ' s B - tree ' s mutex . However , if code will
* change then we will return error code ( - EAGAIN ) from
* here . Really , it means that first try to set of xattr
* fails with error but second attempt will have success .
*/
return - EAGAIN ;
case HFSPLUS_VALID_ATTR_TREE :
return 0 ;
case HFSPLUS_FAILED_ATTR_TREE :
return - EOPNOTSUPP ;
default :
BUG ( ) ;
}
attr_file = hfsplus_iget ( sb , HFSPLUS_ATTR_CNID ) ;
if ( IS_ERR ( attr_file ) ) {
pr_err ( " failed to load attributes file \n " ) ;
return PTR_ERR ( attr_file ) ;
}
BUG_ON ( i_size_read ( attr_file ) ! = 0 ) ;
hip = HFSPLUS_I ( attr_file ) ;
clump_size = hfsplus_calc_btree_clump_size ( sb - > s_blocksize ,
node_size ,
sbi - > sect_count ,
HFSPLUS_ATTR_CNID ) ;
mutex_lock ( & hip - > extents_lock ) ;
hip - > clump_blocks = clump_size > > sbi - > alloc_blksz_shift ;
mutex_unlock ( & hip - > extents_lock ) ;
if ( sbi - > free_blocks < = ( hip - > clump_blocks < < 1 ) ) {
err = - ENOSPC ;
goto end_attr_file_creation ;
}
while ( hip - > alloc_blocks < hip - > clump_blocks ) {
2014-06-07 01:36:28 +04:00
err = hfsplus_file_extend ( attr_file , false ) ;
2013-11-13 03:11:09 +04:00
if ( unlikely ( err ) ) {
pr_err ( " failed to extend attributes file \n " ) ;
goto end_attr_file_creation ;
}
hip - > phys_size = attr_file - > i_size =
( loff_t ) hip - > alloc_blocks < < sbi - > alloc_blksz_shift ;
hip - > fs_blocks = hip - > alloc_blocks < < sbi - > fs_shift ;
inode_set_bytes ( attr_file , attr_file - > i_size ) ;
}
buf = kzalloc ( node_size , GFP_NOFS ) ;
if ( ! buf ) {
pr_err ( " failed to allocate memory for header node \n " ) ;
err = - ENOMEM ;
goto end_attr_file_creation ;
}
hfsplus_init_header_node ( attr_file , clump_size , buf , node_size ) ;
mapping = attr_file - > i_mapping ;
index = 0 ;
written = 0 ;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
for ( ; written < node_size ; index + + , written + = PAGE_SIZE ) {
2013-11-13 03:11:09 +04:00
void * kaddr ;
page = read_mapping_page ( mapping , index , NULL ) ;
if ( IS_ERR ( page ) ) {
err = PTR_ERR ( page ) ;
goto failed_header_node_init ;
}
kaddr = kmap_atomic ( page ) ;
memcpy ( kaddr , buf + written ,
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
min_t ( size_t , PAGE_SIZE , node_size - written ) ) ;
2013-11-13 03:11:09 +04:00
kunmap_atomic ( kaddr ) ;
set_page_dirty ( page ) ;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
put_page ( page ) ;
2013-11-13 03:11:09 +04:00
}
hfsplus_mark_inode_dirty ( attr_file , HFSPLUS_I_ATTR_DIRTY ) ;
sbi - > attr_tree = hfs_btree_open ( sb , HFSPLUS_ATTR_CNID ) ;
if ( ! sbi - > attr_tree )
pr_err ( " failed to load attributes file \n " ) ;
failed_header_node_init :
kfree ( buf ) ;
end_attr_file_creation :
iput ( attr_file ) ;
if ( ! err )
atomic_set ( & sbi - > attr_tree_state , HFSPLUS_VALID_ATTR_TREE ) ;
else if ( err = = - ENOSPC )
atomic_set ( & sbi - > attr_tree_state , HFSPLUS_EMPTY_ATTR_TREE ) ;
else
atomic_set ( & sbi - > attr_tree_state , HFSPLUS_FAILED_ATTR_TREE ) ;
return err ;
}
2013-02-28 05:03:03 +04:00
int __hfsplus_setxattr ( struct inode * inode , const char * name ,
const void * value , size_t size , int flags )
{
int err = 0 ;
struct hfs_find_data cat_fd ;
hfsplus_cat_entry entry ;
u16 cat_entry_flags , cat_entry_type ;
u16 folder_finderinfo_len = sizeof ( struct DInfo ) +
sizeof ( struct DXInfo ) ;
u16 file_finderinfo_len = sizeof ( struct FInfo ) +
sizeof ( struct FXInfo ) ;
if ( ( ! S_ISREG ( inode - > i_mode ) & &
! S_ISDIR ( inode - > i_mode ) ) | |
HFSPLUS_IS_RSRC ( inode ) )
return - EOPNOTSUPP ;
2014-01-30 11:59:19 +04:00
if ( value = = NULL )
return hfsplus_removexattr ( inode , name ) ;
2013-02-28 05:03:03 +04:00
err = hfs_find_init ( HFSPLUS_SB ( inode - > i_sb ) - > cat_tree , & cat_fd ) ;
if ( err ) {
2013-05-01 02:27:55 +04:00
pr_err ( " can't init xattr find struct \n " ) ;
2013-02-28 05:03:03 +04:00
return err ;
}
err = hfsplus_find_cat ( inode - > i_sb , inode - > i_ino , & cat_fd ) ;
if ( err ) {
2013-05-01 02:27:55 +04:00
pr_err ( " catalog searching failed \n " ) ;
2013-02-28 05:03:03 +04:00
goto end_setxattr ;
}
if ( ! strcmp_xattr_finder_info ( name ) ) {
if ( flags & XATTR_CREATE ) {
2013-05-01 02:27:55 +04:00
pr_err ( " xattr exists yet \n " ) ;
2013-02-28 05:03:03 +04:00
err = - EOPNOTSUPP ;
goto end_setxattr ;
}
hfs_bnode_read ( cat_fd . bnode , & entry , cat_fd . entryoffset ,
sizeof ( hfsplus_cat_entry ) ) ;
if ( be16_to_cpu ( entry . type ) = = HFSPLUS_FOLDER ) {
if ( size = = folder_finderinfo_len ) {
memcpy ( & entry . folder . user_info , value ,
folder_finderinfo_len ) ;
hfs_bnode_write ( cat_fd . bnode , & entry ,
cat_fd . entryoffset ,
sizeof ( struct hfsplus_cat_folder ) ) ;
hfsplus_mark_inode_dirty ( inode ,
HFSPLUS_I_CAT_DIRTY ) ;
} else {
err = - ERANGE ;
goto end_setxattr ;
}
} else if ( be16_to_cpu ( entry . type ) = = HFSPLUS_FILE ) {
if ( size = = file_finderinfo_len ) {
memcpy ( & entry . file . user_info , value ,
file_finderinfo_len ) ;
hfs_bnode_write ( cat_fd . bnode , & entry ,
cat_fd . entryoffset ,
sizeof ( struct hfsplus_cat_file ) ) ;
hfsplus_mark_inode_dirty ( inode ,
HFSPLUS_I_CAT_DIRTY ) ;
} else {
err = - ERANGE ;
goto end_setxattr ;
}
} else {
err = - EOPNOTSUPP ;
goto end_setxattr ;
}
goto end_setxattr ;
}
if ( ! HFSPLUS_SB ( inode - > i_sb ) - > attr_tree ) {
2013-11-13 03:11:09 +04:00
err = hfsplus_create_attributes_file ( inode - > i_sb ) ;
if ( unlikely ( err ) )
goto end_setxattr ;
2013-02-28 05:03:03 +04:00
}
if ( hfsplus_attr_exists ( inode , name ) ) {
if ( flags & XATTR_CREATE ) {
2013-05-01 02:27:55 +04:00
pr_err ( " xattr exists yet \n " ) ;
2013-02-28 05:03:03 +04:00
err = - EOPNOTSUPP ;
goto end_setxattr ;
}
err = hfsplus_delete_attr ( inode , name ) ;
if ( err )
goto end_setxattr ;
err = hfsplus_create_attr ( inode , name , value , size ) ;
if ( err )
goto end_setxattr ;
} else {
if ( flags & XATTR_REPLACE ) {
2013-05-01 02:27:55 +04:00
pr_err ( " cannot replace xattr \n " ) ;
2013-02-28 05:03:03 +04:00
err = - EOPNOTSUPP ;
goto end_setxattr ;
}
err = hfsplus_create_attr ( inode , name , value , size ) ;
if ( err )
goto end_setxattr ;
}
cat_entry_type = hfs_bnode_read_u16 ( cat_fd . bnode , cat_fd . entryoffset ) ;
if ( cat_entry_type = = HFSPLUS_FOLDER ) {
cat_entry_flags = hfs_bnode_read_u16 ( cat_fd . bnode ,
cat_fd . entryoffset +
offsetof ( struct hfsplus_cat_folder , flags ) ) ;
cat_entry_flags | = HFSPLUS_XATTR_EXISTS ;
if ( ! strcmp_xattr_acl ( name ) )
cat_entry_flags | = HFSPLUS_ACL_EXISTS ;
hfs_bnode_write_u16 ( cat_fd . bnode , cat_fd . entryoffset +
offsetof ( struct hfsplus_cat_folder , flags ) ,
cat_entry_flags ) ;
hfsplus_mark_inode_dirty ( inode , HFSPLUS_I_CAT_DIRTY ) ;
} else if ( cat_entry_type = = HFSPLUS_FILE ) {
cat_entry_flags = hfs_bnode_read_u16 ( cat_fd . bnode ,
cat_fd . entryoffset +
offsetof ( struct hfsplus_cat_file , flags ) ) ;
cat_entry_flags | = HFSPLUS_XATTR_EXISTS ;
if ( ! strcmp_xattr_acl ( name ) )
cat_entry_flags | = HFSPLUS_ACL_EXISTS ;
hfs_bnode_write_u16 ( cat_fd . bnode , cat_fd . entryoffset +
offsetof ( struct hfsplus_cat_file , flags ) ,
cat_entry_flags ) ;
hfsplus_mark_inode_dirty ( inode , HFSPLUS_I_CAT_DIRTY ) ;
} else {
2013-05-01 02:27:55 +04:00
pr_err ( " invalid catalog entry type \n " ) ;
2013-02-28 05:03:03 +04:00
err = - EIO ;
goto end_setxattr ;
}
end_setxattr :
hfs_find_exit ( & cat_fd ) ;
return err ;
}
static int name_len ( const char * xattr_name , int xattr_name_len )
{
int len = xattr_name_len + 1 ;
2014-01-30 11:59:19 +04:00
if ( ! is_known_namespace ( xattr_name ) )
2013-02-28 05:03:03 +04:00
len + = XATTR_MAC_OSX_PREFIX_LEN ;
return len ;
}
static int copy_name ( char * buffer , const char * xattr_name , int name_len )
{
int len = name_len ;
int offset = 0 ;
2014-01-30 11:59:19 +04:00
if ( ! is_known_namespace ( xattr_name ) ) {
2019-07-17 02:29:15 +03:00
memcpy ( buffer , XATTR_MAC_OSX_PREFIX , XATTR_MAC_OSX_PREFIX_LEN ) ;
2013-02-28 05:03:03 +04:00
offset + = XATTR_MAC_OSX_PREFIX_LEN ;
len + = XATTR_MAC_OSX_PREFIX_LEN ;
}
strncpy ( buffer + offset , xattr_name , name_len ) ;
memset ( buffer + offset + name_len , 0 , 1 ) ;
len + = 1 ;
return len ;
}
2016-05-27 17:19:30 +03:00
int hfsplus_setxattr ( struct inode * inode , const char * name ,
2015-04-16 22:47:01 +03:00
const void * value , size_t size , int flags ,
const char * prefix , size_t prefixlen )
{
char * xattr_name ;
int res ;
xattr_name = kmalloc ( NLS_MAX_CHARSET_SIZE * HFSPLUS_ATTR_MAX_STRLEN + 1 ,
GFP_KERNEL ) ;
if ( ! xattr_name )
return - ENOMEM ;
strcpy ( xattr_name , prefix ) ;
strcpy ( xattr_name + prefixlen , name ) ;
2016-05-27 17:19:30 +03:00
res = __hfsplus_setxattr ( inode , xattr_name , value , size , flags ) ;
2015-04-16 22:47:01 +03:00
kfree ( xattr_name ) ;
return res ;
}
2013-09-12 01:24:30 +04:00
static ssize_t hfsplus_getxattr_finder_info ( struct inode * inode ,
2013-02-28 05:03:03 +04:00
void * value , size_t size )
{
ssize_t res = 0 ;
struct hfs_find_data fd ;
u16 entry_type ;
u16 folder_rec_len = sizeof ( struct DInfo ) + sizeof ( struct DXInfo ) ;
u16 file_rec_len = sizeof ( struct FInfo ) + sizeof ( struct FXInfo ) ;
u16 record_len = max ( folder_rec_len , file_rec_len ) ;
u8 folder_finder_info [ sizeof ( struct DInfo ) + sizeof ( struct DXInfo ) ] ;
u8 file_finder_info [ sizeof ( struct FInfo ) + sizeof ( struct FXInfo ) ] ;
if ( size > = record_len ) {
res = hfs_find_init ( HFSPLUS_SB ( inode - > i_sb ) - > cat_tree , & fd ) ;
if ( res ) {
2013-05-01 02:27:55 +04:00
pr_err ( " can't init xattr find struct \n " ) ;
2013-02-28 05:03:03 +04:00
return res ;
}
res = hfsplus_find_cat ( inode - > i_sb , inode - > i_ino , & fd ) ;
if ( res )
goto end_getxattr_finder_info ;
entry_type = hfs_bnode_read_u16 ( fd . bnode , fd . entryoffset ) ;
if ( entry_type = = HFSPLUS_FOLDER ) {
hfs_bnode_read ( fd . bnode , folder_finder_info ,
fd . entryoffset +
offsetof ( struct hfsplus_cat_folder , user_info ) ,
folder_rec_len ) ;
memcpy ( value , folder_finder_info , folder_rec_len ) ;
res = folder_rec_len ;
} else if ( entry_type = = HFSPLUS_FILE ) {
hfs_bnode_read ( fd . bnode , file_finder_info ,
fd . entryoffset +
offsetof ( struct hfsplus_cat_file , user_info ) ,
file_rec_len ) ;
memcpy ( value , file_finder_info , file_rec_len ) ;
res = file_rec_len ;
} else {
res = - EOPNOTSUPP ;
goto end_getxattr_finder_info ;
}
} else
res = size ? - ERANGE : record_len ;
end_getxattr_finder_info :
if ( size > = record_len )
hfs_find_exit ( & fd ) ;
return res ;
}
2013-09-12 01:24:30 +04:00
ssize_t __hfsplus_getxattr ( struct inode * inode , const char * name ,
2013-02-28 05:03:03 +04:00
void * value , size_t size )
{
struct hfs_find_data fd ;
hfsplus_attr_entry * entry ;
__be32 xattr_record_type ;
u32 record_type ;
u16 record_length = 0 ;
ssize_t res = 0 ;
if ( ( ! S_ISREG ( inode - > i_mode ) & &
! S_ISDIR ( inode - > i_mode ) ) | |
HFSPLUS_IS_RSRC ( inode ) )
return - EOPNOTSUPP ;
if ( ! strcmp_xattr_finder_info ( name ) )
2013-09-12 01:24:30 +04:00
return hfsplus_getxattr_finder_info ( inode , value , size ) ;
2013-02-28 05:03:03 +04:00
if ( ! HFSPLUS_SB ( inode - > i_sb ) - > attr_tree )
return - EOPNOTSUPP ;
entry = hfsplus_alloc_attr_entry ( ) ;
if ( ! entry ) {
2013-05-01 02:27:55 +04:00
pr_err ( " can't allocate xattr entry \n " ) ;
2013-02-28 05:03:03 +04:00
return - ENOMEM ;
}
res = hfs_find_init ( HFSPLUS_SB ( inode - > i_sb ) - > attr_tree , & fd ) ;
if ( res ) {
2013-05-01 02:27:55 +04:00
pr_err ( " can't init xattr find struct \n " ) ;
2013-02-28 05:03:03 +04:00
goto failed_getxattr_init ;
}
res = hfsplus_find_attr ( inode - > i_sb , inode - > i_ino , name , & fd ) ;
if ( res ) {
if ( res = = - ENOENT )
res = - ENODATA ;
else
2013-05-01 02:27:55 +04:00
pr_err ( " xattr searching failed \n " ) ;
2013-02-28 05:03:03 +04:00
goto out ;
}
hfs_bnode_read ( fd . bnode , & xattr_record_type ,
fd . entryoffset , sizeof ( xattr_record_type ) ) ;
record_type = be32_to_cpu ( xattr_record_type ) ;
if ( record_type = = HFSPLUS_ATTR_INLINE_DATA ) {
record_length = hfs_bnode_read_u16 ( fd . bnode ,
fd . entryoffset +
offsetof ( struct hfsplus_attr_inline_data ,
length ) ) ;
if ( record_length > HFSPLUS_MAX_INLINE_DATA_SIZE ) {
2013-05-01 02:27:55 +04:00
pr_err ( " invalid xattr record size \n " ) ;
2013-02-28 05:03:03 +04:00
res = - EIO ;
goto out ;
}
} else if ( record_type = = HFSPLUS_ATTR_FORK_DATA | |
record_type = = HFSPLUS_ATTR_EXTENTS ) {
2013-05-01 02:27:55 +04:00
pr_err ( " only inline data xattr are supported \n " ) ;
2013-02-28 05:03:03 +04:00
res = - EOPNOTSUPP ;
goto out ;
} else {
2013-05-01 02:27:55 +04:00
pr_err ( " invalid xattr record \n " ) ;
2013-02-28 05:03:03 +04:00
res = - EIO ;
goto out ;
}
if ( size ) {
hfs_bnode_read ( fd . bnode , entry , fd . entryoffset ,
offsetof ( struct hfsplus_attr_inline_data ,
raw_bytes ) + record_length ) ;
}
if ( size > = record_length ) {
memcpy ( value , entry - > inline_data . raw_bytes , record_length ) ;
res = record_length ;
} else
res = size ? - ERANGE : record_length ;
out :
hfs_find_exit ( & fd ) ;
failed_getxattr_init :
hfsplus_destroy_attr_entry ( entry ) ;
return res ;
}
2016-04-11 03:48:24 +03:00
ssize_t hfsplus_getxattr ( struct inode * inode , const char * name ,
2015-04-16 22:46:58 +03:00
void * value , size_t size ,
const char * prefix , size_t prefixlen )
{
int res ;
char * xattr_name ;
xattr_name = kmalloc ( NLS_MAX_CHARSET_SIZE * HFSPLUS_ATTR_MAX_STRLEN + 1 ,
GFP_KERNEL ) ;
if ( ! xattr_name )
return - ENOMEM ;
strcpy ( xattr_name , prefix ) ;
strcpy ( xattr_name + prefixlen , name ) ;
2016-04-11 03:48:24 +03:00
res = __hfsplus_getxattr ( inode , xattr_name , value , size ) ;
2015-04-16 22:46:58 +03:00
kfree ( xattr_name ) ;
return res ;
}
2013-02-28 05:03:03 +04:00
static inline int can_list ( const char * xattr_name )
{
if ( ! xattr_name )
return 0 ;
return strncmp ( xattr_name , XATTR_TRUSTED_PREFIX ,
XATTR_TRUSTED_PREFIX_LEN ) | |
capable ( CAP_SYS_ADMIN ) ;
}
static ssize_t hfsplus_listxattr_finder_info ( struct dentry * dentry ,
char * buffer , size_t size )
{
ssize_t res = 0 ;
2015-03-18 01:25:59 +03:00
struct inode * inode = d_inode ( dentry ) ;
2013-02-28 05:03:03 +04:00
struct hfs_find_data fd ;
u16 entry_type ;
u8 folder_finder_info [ sizeof ( struct DInfo ) + sizeof ( struct DXInfo ) ] ;
u8 file_finder_info [ sizeof ( struct FInfo ) + sizeof ( struct FXInfo ) ] ;
unsigned long len , found_bit ;
int xattr_name_len , symbols_count ;
res = hfs_find_init ( HFSPLUS_SB ( inode - > i_sb ) - > cat_tree , & fd ) ;
if ( res ) {
2013-05-01 02:27:55 +04:00
pr_err ( " can't init xattr find struct \n " ) ;
2013-02-28 05:03:03 +04:00
return res ;
}
res = hfsplus_find_cat ( inode - > i_sb , inode - > i_ino , & fd ) ;
if ( res )
goto end_listxattr_finder_info ;
entry_type = hfs_bnode_read_u16 ( fd . bnode , fd . entryoffset ) ;
if ( entry_type = = HFSPLUS_FOLDER ) {
len = sizeof ( struct DInfo ) + sizeof ( struct DXInfo ) ;
hfs_bnode_read ( fd . bnode , folder_finder_info ,
fd . entryoffset +
offsetof ( struct hfsplus_cat_folder , user_info ) ,
len ) ;
found_bit = find_first_bit ( ( void * ) folder_finder_info , len * 8 ) ;
} else if ( entry_type = = HFSPLUS_FILE ) {
len = sizeof ( struct FInfo ) + sizeof ( struct FXInfo ) ;
hfs_bnode_read ( fd . bnode , file_finder_info ,
fd . entryoffset +
offsetof ( struct hfsplus_cat_file , user_info ) ,
len ) ;
found_bit = find_first_bit ( ( void * ) file_finder_info , len * 8 ) ;
} else {
res = - EOPNOTSUPP ;
goto end_listxattr_finder_info ;
}
if ( found_bit > = ( len * 8 ) )
res = 0 ;
else {
symbols_count = sizeof ( HFSPLUS_XATTR_FINDER_INFO_NAME ) - 1 ;
xattr_name_len =
name_len ( HFSPLUS_XATTR_FINDER_INFO_NAME , symbols_count ) ;
if ( ! buffer | | ! size ) {
if ( can_list ( HFSPLUS_XATTR_FINDER_INFO_NAME ) )
res = xattr_name_len ;
} else if ( can_list ( HFSPLUS_XATTR_FINDER_INFO_NAME ) ) {
if ( size < xattr_name_len )
res = - ERANGE ;
else {
res = copy_name ( buffer ,
HFSPLUS_XATTR_FINDER_INFO_NAME ,
symbols_count ) ;
}
}
}
end_listxattr_finder_info :
hfs_find_exit ( & fd ) ;
return res ;
}
ssize_t hfsplus_listxattr ( struct dentry * dentry , char * buffer , size_t size )
{
ssize_t err ;
ssize_t res = 0 ;
2015-03-18 01:25:59 +03:00
struct inode * inode = d_inode ( dentry ) ;
2013-02-28 05:03:03 +04:00
struct hfs_find_data fd ;
u16 key_len = 0 ;
struct hfsplus_attr_key attr_key ;
hfsplus: fix worst-case unicode to char conversion of file names and attributes
This is a series of 3 patches which corrects issues in HFS+ concerning
the use of non-english file names and attributes. Names and attributes
are stored internally as UTF-16 units up to a fixed maximum size, and
convert to and from user-representation by NLS. The code incorrectly
assume that NLS string lengths are equal to unicode lengths, which is
only true for English ascii usage.
This patch (of 3):
The HFS Plus Volume Format specification (TN1150) states that file names
are stored internally as a maximum of 255 unicode characters, as defined
by The Unicode Standard, Version 2.0 [Unicode, Inc. ISBN
0-201-48345-9]. File names are converted by the NLS system on Linux
before presented to the user.
255 CJK characters converts to UTF-8 with 1 unicode character to up to 3
bytes, and to GB18030 with 1 unicode character to up to 4 bytes. Thus,
trying in a UTF-8 locale to list files with names of more than 85 CJK
characters results in:
$ ls /mnt
ls: reading directory /mnt: File name too long
The receiving buffer to hfsplus_uni2asc() needs to be 255 x
NLS_MAX_CHARSET_SIZE bytes, not 255 bytes as the code has always been.
Similar consideration applies to attributes, which are stored internally
as a maximum of 127 UTF-16BE units. See XNU source for an up-to-date
reference on attributes.
Strictly speaking, the maximum value of NLS_MAX_CHARSET_SIZE = 6 is not
attainable in the case of conversion to UTF-8, as going beyond 3 bytes
requires the use of surrogate pairs, i.e. consuming two input units.
Thanks Anton Altaparmakov for reviewing an earlier version of this
change.
This patch fixes all callers of hfsplus_uni2asc(), and also enables the
use of long non-English file names in HFS+. The getting and setting,
and general usage of long non-English attributes requires further
forthcoming work, in the following patches of this series.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Sougata Santra <sougata@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 01:36:21 +04:00
char * strbuf ;
2013-02-28 05:03:03 +04:00
int xattr_name_len ;
if ( ( ! S_ISREG ( inode - > i_mode ) & &
! S_ISDIR ( inode - > i_mode ) ) | |
HFSPLUS_IS_RSRC ( inode ) )
return - EOPNOTSUPP ;
res = hfsplus_listxattr_finder_info ( dentry , buffer , size ) ;
if ( res < 0 )
return res ;
else if ( ! HFSPLUS_SB ( inode - > i_sb ) - > attr_tree )
return ( res = = 0 ) ? - EOPNOTSUPP : res ;
err = hfs_find_init ( HFSPLUS_SB ( inode - > i_sb ) - > attr_tree , & fd ) ;
if ( err ) {
2013-05-01 02:27:55 +04:00
pr_err ( " can't init xattr find struct \n " ) ;
2013-02-28 05:03:03 +04:00
return err ;
}
hfsplus: fix worst-case unicode to char conversion of file names and attributes
This is a series of 3 patches which corrects issues in HFS+ concerning
the use of non-english file names and attributes. Names and attributes
are stored internally as UTF-16 units up to a fixed maximum size, and
convert to and from user-representation by NLS. The code incorrectly
assume that NLS string lengths are equal to unicode lengths, which is
only true for English ascii usage.
This patch (of 3):
The HFS Plus Volume Format specification (TN1150) states that file names
are stored internally as a maximum of 255 unicode characters, as defined
by The Unicode Standard, Version 2.0 [Unicode, Inc. ISBN
0-201-48345-9]. File names are converted by the NLS system on Linux
before presented to the user.
255 CJK characters converts to UTF-8 with 1 unicode character to up to 3
bytes, and to GB18030 with 1 unicode character to up to 4 bytes. Thus,
trying in a UTF-8 locale to list files with names of more than 85 CJK
characters results in:
$ ls /mnt
ls: reading directory /mnt: File name too long
The receiving buffer to hfsplus_uni2asc() needs to be 255 x
NLS_MAX_CHARSET_SIZE bytes, not 255 bytes as the code has always been.
Similar consideration applies to attributes, which are stored internally
as a maximum of 127 UTF-16BE units. See XNU source for an up-to-date
reference on attributes.
Strictly speaking, the maximum value of NLS_MAX_CHARSET_SIZE = 6 is not
attainable in the case of conversion to UTF-8, as going beyond 3 bytes
requires the use of surrogate pairs, i.e. consuming two input units.
Thanks Anton Altaparmakov for reviewing an earlier version of this
change.
This patch fixes all callers of hfsplus_uni2asc(), and also enables the
use of long non-English file names in HFS+. The getting and setting,
and general usage of long non-English attributes requires further
forthcoming work, in the following patches of this series.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Sougata Santra <sougata@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 01:36:21 +04:00
strbuf = kmalloc ( NLS_MAX_CHARSET_SIZE * HFSPLUS_ATTR_MAX_STRLEN +
XATTR_MAC_OSX_PREFIX_LEN + 1 , GFP_KERNEL ) ;
if ( ! strbuf ) {
res = - ENOMEM ;
goto out ;
}
2013-02-28 05:03:03 +04:00
err = hfsplus_find_attr ( inode - > i_sb , inode - > i_ino , NULL , & fd ) ;
if ( err ) {
if ( err = = - ENOENT ) {
if ( res = = 0 )
res = - ENODATA ;
goto end_listxattr ;
} else {
res = err ;
goto end_listxattr ;
}
}
for ( ; ; ) {
key_len = hfs_bnode_read_u16 ( fd . bnode , fd . keyoffset ) ;
if ( key_len = = 0 | | key_len > fd . tree - > max_key_len ) {
2013-05-01 02:27:55 +04:00
pr_err ( " invalid xattr key length: %d \n " , key_len ) ;
2013-02-28 05:03:03 +04:00
res = - EIO ;
goto end_listxattr ;
}
hfs_bnode_read ( fd . bnode , & attr_key ,
fd . keyoffset , key_len + sizeof ( key_len ) ) ;
if ( be32_to_cpu ( attr_key . cnid ) ! = inode - > i_ino )
goto end_listxattr ;
hfsplus: fix worst-case unicode to char conversion of file names and attributes
This is a series of 3 patches which corrects issues in HFS+ concerning
the use of non-english file names and attributes. Names and attributes
are stored internally as UTF-16 units up to a fixed maximum size, and
convert to and from user-representation by NLS. The code incorrectly
assume that NLS string lengths are equal to unicode lengths, which is
only true for English ascii usage.
This patch (of 3):
The HFS Plus Volume Format specification (TN1150) states that file names
are stored internally as a maximum of 255 unicode characters, as defined
by The Unicode Standard, Version 2.0 [Unicode, Inc. ISBN
0-201-48345-9]. File names are converted by the NLS system on Linux
before presented to the user.
255 CJK characters converts to UTF-8 with 1 unicode character to up to 3
bytes, and to GB18030 with 1 unicode character to up to 4 bytes. Thus,
trying in a UTF-8 locale to list files with names of more than 85 CJK
characters results in:
$ ls /mnt
ls: reading directory /mnt: File name too long
The receiving buffer to hfsplus_uni2asc() needs to be 255 x
NLS_MAX_CHARSET_SIZE bytes, not 255 bytes as the code has always been.
Similar consideration applies to attributes, which are stored internally
as a maximum of 127 UTF-16BE units. See XNU source for an up-to-date
reference on attributes.
Strictly speaking, the maximum value of NLS_MAX_CHARSET_SIZE = 6 is not
attainable in the case of conversion to UTF-8, as going beyond 3 bytes
requires the use of surrogate pairs, i.e. consuming two input units.
Thanks Anton Altaparmakov for reviewing an earlier version of this
change.
This patch fixes all callers of hfsplus_uni2asc(), and also enables the
use of long non-English file names in HFS+. The getting and setting,
and general usage of long non-English attributes requires further
forthcoming work, in the following patches of this series.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Sougata Santra <sougata@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 01:36:21 +04:00
xattr_name_len = NLS_MAX_CHARSET_SIZE * HFSPLUS_ATTR_MAX_STRLEN ;
2013-02-28 05:03:03 +04:00
if ( hfsplus_uni2asc ( inode - > i_sb ,
( const struct hfsplus_unistr * ) & fd . key - > attr . key_name ,
strbuf , & xattr_name_len ) ) {
2013-05-01 02:27:55 +04:00
pr_err ( " unicode conversion failed \n " ) ;
2013-02-28 05:03:03 +04:00
res = - EIO ;
goto end_listxattr ;
}
if ( ! buffer | | ! size ) {
if ( can_list ( strbuf ) )
res + = name_len ( strbuf , xattr_name_len ) ;
} else if ( can_list ( strbuf ) ) {
if ( size < ( res + name_len ( strbuf , xattr_name_len ) ) ) {
res = - ERANGE ;
goto end_listxattr ;
} else
res + = copy_name ( buffer + res ,
strbuf , xattr_name_len ) ;
}
if ( hfs_brec_goto ( & fd , 1 ) )
goto end_listxattr ;
}
end_listxattr :
hfsplus: fix worst-case unicode to char conversion of file names and attributes
This is a series of 3 patches which corrects issues in HFS+ concerning
the use of non-english file names and attributes. Names and attributes
are stored internally as UTF-16 units up to a fixed maximum size, and
convert to and from user-representation by NLS. The code incorrectly
assume that NLS string lengths are equal to unicode lengths, which is
only true for English ascii usage.
This patch (of 3):
The HFS Plus Volume Format specification (TN1150) states that file names
are stored internally as a maximum of 255 unicode characters, as defined
by The Unicode Standard, Version 2.0 [Unicode, Inc. ISBN
0-201-48345-9]. File names are converted by the NLS system on Linux
before presented to the user.
255 CJK characters converts to UTF-8 with 1 unicode character to up to 3
bytes, and to GB18030 with 1 unicode character to up to 4 bytes. Thus,
trying in a UTF-8 locale to list files with names of more than 85 CJK
characters results in:
$ ls /mnt
ls: reading directory /mnt: File name too long
The receiving buffer to hfsplus_uni2asc() needs to be 255 x
NLS_MAX_CHARSET_SIZE bytes, not 255 bytes as the code has always been.
Similar consideration applies to attributes, which are stored internally
as a maximum of 127 UTF-16BE units. See XNU source for an up-to-date
reference on attributes.
Strictly speaking, the maximum value of NLS_MAX_CHARSET_SIZE = 6 is not
attainable in the case of conversion to UTF-8, as going beyond 3 bytes
requires the use of surrogate pairs, i.e. consuming two input units.
Thanks Anton Altaparmakov for reviewing an earlier version of this
change.
This patch fixes all callers of hfsplus_uni2asc(), and also enables the
use of long non-English file names in HFS+. The getting and setting,
and general usage of long non-English attributes requires further
forthcoming work, in the following patches of this series.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Sougata Santra <sougata@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-07 01:36:21 +04:00
kfree ( strbuf ) ;
out :
2013-02-28 05:03:03 +04:00
hfs_find_exit ( & fd ) ;
return res ;
}
2014-01-30 11:59:19 +04:00
static int hfsplus_removexattr ( struct inode * inode , const char * name )
2013-02-28 05:03:03 +04:00
{
int err = 0 ;
struct hfs_find_data cat_fd ;
u16 flags ;
u16 cat_entry_type ;
int is_xattr_acl_deleted = 0 ;
int is_all_xattrs_deleted = 0 ;
if ( ! HFSPLUS_SB ( inode - > i_sb ) - > attr_tree )
return - EOPNOTSUPP ;
if ( ! strcmp_xattr_finder_info ( name ) )
return - EOPNOTSUPP ;
err = hfs_find_init ( HFSPLUS_SB ( inode - > i_sb ) - > cat_tree , & cat_fd ) ;
if ( err ) {
2013-05-01 02:27:55 +04:00
pr_err ( " can't init xattr find struct \n " ) ;
2013-02-28 05:03:03 +04:00
return err ;
}
err = hfsplus_find_cat ( inode - > i_sb , inode - > i_ino , & cat_fd ) ;
if ( err ) {
2013-05-01 02:27:55 +04:00
pr_err ( " catalog searching failed \n " ) ;
2013-02-28 05:03:03 +04:00
goto end_removexattr ;
}
err = hfsplus_delete_attr ( inode , name ) ;
if ( err )
goto end_removexattr ;
is_xattr_acl_deleted = ! strcmp_xattr_acl ( name ) ;
is_all_xattrs_deleted = ! hfsplus_attr_exists ( inode , NULL ) ;
if ( ! is_xattr_acl_deleted & & ! is_all_xattrs_deleted )
goto end_removexattr ;
cat_entry_type = hfs_bnode_read_u16 ( cat_fd . bnode , cat_fd . entryoffset ) ;
if ( cat_entry_type = = HFSPLUS_FOLDER ) {
flags = hfs_bnode_read_u16 ( cat_fd . bnode , cat_fd . entryoffset +
offsetof ( struct hfsplus_cat_folder , flags ) ) ;
if ( is_xattr_acl_deleted )
flags & = ~ HFSPLUS_ACL_EXISTS ;
if ( is_all_xattrs_deleted )
flags & = ~ HFSPLUS_XATTR_EXISTS ;
hfs_bnode_write_u16 ( cat_fd . bnode , cat_fd . entryoffset +
offsetof ( struct hfsplus_cat_folder , flags ) ,
flags ) ;
hfsplus_mark_inode_dirty ( inode , HFSPLUS_I_CAT_DIRTY ) ;
} else if ( cat_entry_type = = HFSPLUS_FILE ) {
flags = hfs_bnode_read_u16 ( cat_fd . bnode , cat_fd . entryoffset +
offsetof ( struct hfsplus_cat_file , flags ) ) ;
if ( is_xattr_acl_deleted )
flags & = ~ HFSPLUS_ACL_EXISTS ;
if ( is_all_xattrs_deleted )
flags & = ~ HFSPLUS_XATTR_EXISTS ;
hfs_bnode_write_u16 ( cat_fd . bnode , cat_fd . entryoffset +
offsetof ( struct hfsplus_cat_file , flags ) ,
flags ) ;
hfsplus_mark_inode_dirty ( inode , HFSPLUS_I_CAT_DIRTY ) ;
} else {
2013-05-01 02:27:55 +04:00
pr_err ( " invalid catalog entry type \n " ) ;
2013-02-28 05:03:03 +04:00
err = - EIO ;
goto end_removexattr ;
}
end_removexattr :
hfs_find_exit ( & cat_fd ) ;
return err ;
}
2015-10-04 20:18:51 +03:00
static int hfsplus_osx_getxattr ( const struct xattr_handler * handler ,
2016-04-11 03:48:24 +03:00
struct dentry * unused , struct inode * inode ,
const char * name , void * buffer , size_t size )
2013-02-28 05:03:03 +04:00
{
2014-01-30 11:59:19 +04:00
/*
* Don ' t allow retrieving properly prefixed attributes
* by prepending them with " osx. "
*/
if ( is_known_namespace ( name ) )
return - EOPNOTSUPP ;
2013-02-28 05:03:03 +04:00
hfsplus: don't store special "osx" xattr prefix on-disk
On Mac OS X, HFS+ extended attributes are not namespaced. Since we want
to be compatible with OS X filesystems and yet still support the Linux
namespacing system, the hfsplus driver implements a special "osx"
namespace that is reported for any attribute that is not namespaced
on-disk. However, the current code for getting and setting these
unprefixed attributes is broken.
hfsplus_osx_setattr() and hfsplus_osx_getattr() are passed names that have
already had their "osx." prefixes stripped by the generic functions. The
functions first, quite correctly, check those names to make sure that they
aren't prefixed with a known namespace, which would allow namespace access
restrictions to be bypassed. However, the functions then prepend "osx."
to the name they're given before passing it on to hfsplus_getattr() and
hfsplus_setattr(). Not only does this cause the "osx." prefix to be
stored on-disk, defeating its purpose, it also breaks the check for the
special "com.apple.FinderInfo" attribute, which is reported for all files,
and as a consequence makes some userspace applications (e.g. GNU patch)
fail even when extended attributes are not otherwise in use.
There are five commits which have touched this particular code:
127e5f5ae51e ("hfsplus: rework functionality of getting, setting and deleting of extended attributes")
b168fff72109 ("hfsplus: use xattr handlers for removexattr")
bf29e886b242 ("hfsplus: correct usage of HFSPLUS_ATTR_MAX_STRLEN for non-English attributes")
fcacbd95e121 ("fs/hfsplus: move xattr_name allocation in hfsplus_getxattr()")
ec1bbd346f18 ("fs/hfsplus: move xattr_name allocation in hfsplus_setxattr()")
The first commit creates the functions to begin with. The namespace is
prepended by the original code, which I believe was correct at the time,
since hfsplus_?etattr() stripped the prefix if found. The second commit
removes this behavior from hfsplus_?etattr() and appears to have been
intended to also remove the prefixing from hfsplus_osx_?etattr().
However, what it actually does is remove a necessary strncpy() call
completely, breaking the osx namespace entirely. The third commit re-adds
the strncpy() call as it was originally, but doesn't mention it in its
commit message. The final two commits refactor the code and don't affect
its functionality.
This commit does what b168fff attempted to do (prevent the prefix from
being added), but does it properly, instead of passing in an empty buffer
(which is what b168fff actually did).
Fixes: b168fff72109 ("hfsplus: use xattr handlers for removexattr")
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Cc: Sergei Antonov <saproj@gmail.com>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-16 22:47:18 +03:00
/*
* osx is the namespace we use to indicate an unprefixed
* attribute on the filesystem ( like the ones that OS X
* creates ) , so we pass the name through unmodified ( after
* ensuring it doesn ' t conflict with another namespace ) .
*/
2016-04-11 03:48:24 +03:00
return __hfsplus_getxattr ( inode , name , buffer , size ) ;
2013-02-28 05:03:03 +04:00
}
2015-10-04 20:18:51 +03:00
static int hfsplus_osx_setxattr ( const struct xattr_handler * handler ,
2016-05-27 17:19:30 +03:00
struct dentry * unused , struct inode * inode ,
const char * name , const void * buffer ,
size_t size , int flags )
2013-02-28 05:03:03 +04:00
{
2014-01-30 11:59:19 +04:00
/*
* Don ' t allow setting properly prefixed attributes
* by prepending them with " osx. "
*/
2013-12-20 17:16:56 +04:00
if ( is_known_namespace ( name ) )
return - EOPNOTSUPP ;
hfsplus: don't store special "osx" xattr prefix on-disk
On Mac OS X, HFS+ extended attributes are not namespaced. Since we want
to be compatible with OS X filesystems and yet still support the Linux
namespacing system, the hfsplus driver implements a special "osx"
namespace that is reported for any attribute that is not namespaced
on-disk. However, the current code for getting and setting these
unprefixed attributes is broken.
hfsplus_osx_setattr() and hfsplus_osx_getattr() are passed names that have
already had their "osx." prefixes stripped by the generic functions. The
functions first, quite correctly, check those names to make sure that they
aren't prefixed with a known namespace, which would allow namespace access
restrictions to be bypassed. However, the functions then prepend "osx."
to the name they're given before passing it on to hfsplus_getattr() and
hfsplus_setattr(). Not only does this cause the "osx." prefix to be
stored on-disk, defeating its purpose, it also breaks the check for the
special "com.apple.FinderInfo" attribute, which is reported for all files,
and as a consequence makes some userspace applications (e.g. GNU patch)
fail even when extended attributes are not otherwise in use.
There are five commits which have touched this particular code:
127e5f5ae51e ("hfsplus: rework functionality of getting, setting and deleting of extended attributes")
b168fff72109 ("hfsplus: use xattr handlers for removexattr")
bf29e886b242 ("hfsplus: correct usage of HFSPLUS_ATTR_MAX_STRLEN for non-English attributes")
fcacbd95e121 ("fs/hfsplus: move xattr_name allocation in hfsplus_getxattr()")
ec1bbd346f18 ("fs/hfsplus: move xattr_name allocation in hfsplus_setxattr()")
The first commit creates the functions to begin with. The namespace is
prepended by the original code, which I believe was correct at the time,
since hfsplus_?etattr() stripped the prefix if found. The second commit
removes this behavior from hfsplus_?etattr() and appears to have been
intended to also remove the prefixing from hfsplus_osx_?etattr().
However, what it actually does is remove a necessary strncpy() call
completely, breaking the osx namespace entirely. The third commit re-adds
the strncpy() call as it was originally, but doesn't mention it in its
commit message. The final two commits refactor the code and don't affect
its functionality.
This commit does what b168fff attempted to do (prevent the prefix from
being added), but does it properly, instead of passing in an empty buffer
(which is what b168fff actually did).
Fixes: b168fff72109 ("hfsplus: use xattr handlers for removexattr")
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Cc: Sergei Antonov <saproj@gmail.com>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-16 22:47:18 +03:00
/*
* osx is the namespace we use to indicate an unprefixed
* attribute on the filesystem ( like the ones that OS X
* creates ) , so we pass the name through unmodified ( after
* ensuring it doesn ' t conflict with another namespace ) .
*/
2016-05-27 17:19:30 +03:00
return __hfsplus_setxattr ( inode , name , buffer , size , flags ) ;
2013-02-28 05:03:03 +04:00
}
const struct xattr_handler hfsplus_xattr_osx_handler = {
. prefix = XATTR_MAC_OSX_PREFIX ,
. get = hfsplus_osx_getxattr ,
. set = hfsplus_osx_setxattr ,
} ;