linux/fs/afs/inode.c

885 lines
22 KiB
C
Raw Normal View History

/*
* Copyright (c) 2002 Red Hat, Inc. All rights reserved.
*
* This software may be freely redistributed under the terms of the
* GNU General Public License.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Authors: David Woodhouse <dwmw2@infradead.org>
* David Howells <dhowells@redhat.com>
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/sched.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/iversion.h>
#include "internal.h"
#include "afs_fs.h"
static const struct inode_operations afs_symlink_inode_operations = {
.get_link = page_get_link,
.listxattr = afs_listxattr,
};
static noinline void dump_vnode(struct afs_vnode *vnode, struct afs_vnode *parent_vnode)
{
static unsigned long once_only;
pr_warn("kAFS: AFS vnode with undefined type %u\n", vnode->status.type);
pr_warn("kAFS: A=%d m=%o s=%llx v=%llx\n",
vnode->status.abort_code,
vnode->status.mode,
vnode->status.size,
vnode->status.data_version);
pr_warn("kAFS: vnode %llx:%llx:%x\n",
vnode->fid.vid,
vnode->fid.vnode,
vnode->fid.unique);
if (parent_vnode)
pr_warn("kAFS: dir %llx:%llx:%x\n",
parent_vnode->fid.vid,
parent_vnode->fid.vnode,
parent_vnode->fid.unique);
if (!test_and_set_bit(0, &once_only))
dump_stack();
}
/*
* Set the file size and block count. Estimate the number of 512 bytes blocks
* used, rounded up to nearest 1K for consistency with other AFS clients.
*/
static void afs_set_i_size(struct afs_vnode *vnode, u64 size)
{
i_size_write(&vnode->vfs_inode, size);
vnode->vfs_inode.i_blocks = ((size + 1023) >> 10) << 1;
}
/*
* Initialise an inode from the vnode status.
*/
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
static int afs_inode_init_from_status(struct afs_operation *op,
struct afs_vnode_param *vp,
struct afs_vnode *vnode)
{
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
struct afs_file_status *status = &vp->scb.status;
struct inode *inode = AFS_VNODE_TO_I(vnode);
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
struct timespec64 t;
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
_enter("{%llx:%llu.%u} %s",
vp->fid.vid, vp->fid.vnode, vp->fid.unique,
op->type ? op->type->name : "???");
_debug("FS: ft=%d lk=%d sz=%llu ver=%Lu mod=%hu",
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
status->type,
status->nlink,
(unsigned long long) status->size,
status->data_version,
status->mode);
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
write_seqlock(&vnode->cb_lock);
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
vnode->cb_v_break = op->cb_v_break;
vnode->cb_s_break = op->cb_s_break;
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
vnode->status = *status;
afs: Overhaul the callback handling Overhaul the AFS callback handling by the following means: (1) Don't give up callback promises on vnodes that we are no longer using, rather let them just expire on the server or let the server break them. This is actually more efficient for the server as the callback lookup is expensive if there are lots of extant callbacks. (2) Only give up the callback promises we have from a server when the server record is destroyed. Then we can just give up *all* the callback promises on it in one go. (3) Servers can end up being shared between cells if cells are aliased, so don't add all the vnodes being backed by a particular server into a big FID-indexed tree on that server as there may be duplicates. Instead have each volume instance (~= superblock) register an interest in a server as it starts to make use of it and use this to allow the processor for callbacks from the server to find the superblock and thence the inode corresponding to the FID being broken by means of ilookup_nowait(). (4) Rather than iterating over the entire callback list when a mass-break comes in from the server, maintain a counter of mass-breaks in afs_server (cb_seq) and make afs_validate() check it against the copy in afs_vnode. It would be nice not to have to take a read_lock whilst doing this, but that's tricky without using RCU. (5) Save a ref on the fileserver we're using for a call in the afs_call struct so that we can access its cb_s_break during call decoding. (6) Write-lock around callback and status storage in a vnode and read-lock around getattr so that we don't see the status mid-update. This has the following consequences: (1) Data invalidation isn't seen until someone calls afs_validate() on a vnode. Unfortunately, we need to use a key to query the server, but getting one from a background thread is tricky without caching loads of keys all over the place. (2) Mass invalidation isn't seen until someone calls afs_validate(). (3) Callback breaking is going to hit the inode_hash_lock quite a bit. Could this be replaced with rcu_read_lock() since inodes are destroyed under RCU conditions. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:49 +03:00
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
t = status->mtime_client;
inode->i_ctime = t;
inode->i_mtime = t;
inode->i_atime = t;
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
inode->i_flags |= S_NOATIME;
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
inode->i_uid = make_kuid(&init_user_ns, status->owner);
inode->i_gid = make_kgid(&init_user_ns, status->group);
set_nlink(&vnode->vfs_inode, status->nlink);
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
switch (status->type) {
case AFS_FTYPE_FILE:
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
inode->i_mode = S_IFREG | status->mode;
inode->i_op = &afs_file_inode_operations;
inode->i_fop = &afs_file_operations;
afs: Fix directory handling AFS directories are structured blobs that are downloaded just like files and then parsed by the lookup and readdir code and, as such, are currently handled in the pagecache like any other file, with the entire directory content being thrown away each time the directory changes. However, since the blob is a known structure and since the data version counter on a directory increases by exactly one for each change committed to that directory, we can actually edit the directory locally rather than fetching it from the server after each locally-induced change. What we can't do, though, is mix data from the server and data from the client since the server is technically at liberty to rearrange or compress a directory if it sees fit, provided it updates the data version number when it does so and breaks the callback (ie. sends a notification). Further, lookup with lookup-ahead, readdir and, when it arrives, local editing are likely want to scan the whole of a directory. So directory handling needs to be improved to maintain the coherency of the directory blob prior to permitting local directory editing. To this end: (1) If any directory page gets discarded, invalidate and reread the entire directory. (2) If readpage notes that if when it fetches a single page that the version number has changed, the entire directory is flagged for invalidation. (3) Read as much of the directory in one go as we can. Note that this removes local caching of directories in fscache for the moment as we can't pass the pages to fscache_read_or_alloc_pages() since page->lru is in use by the LRU. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-06 16:17:25 +03:00
inode->i_mapping->a_ops = &afs_fs_aops;
break;
case AFS_FTYPE_DIR:
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
inode->i_mode = S_IFDIR | status->mode;
inode->i_op = &afs_dir_inode_operations;
inode->i_fop = &afs_dir_file_operations;
afs: Fix directory handling AFS directories are structured blobs that are downloaded just like files and then parsed by the lookup and readdir code and, as such, are currently handled in the pagecache like any other file, with the entire directory content being thrown away each time the directory changes. However, since the blob is a known structure and since the data version counter on a directory increases by exactly one for each change committed to that directory, we can actually edit the directory locally rather than fetching it from the server after each locally-induced change. What we can't do, though, is mix data from the server and data from the client since the server is technically at liberty to rearrange or compress a directory if it sees fit, provided it updates the data version number when it does so and breaks the callback (ie. sends a notification). Further, lookup with lookup-ahead, readdir and, when it arrives, local editing are likely want to scan the whole of a directory. So directory handling needs to be improved to maintain the coherency of the directory blob prior to permitting local directory editing. To this end: (1) If any directory page gets discarded, invalidate and reread the entire directory. (2) If readpage notes that if when it fetches a single page that the version number has changed, the entire directory is flagged for invalidation. (3) Read as much of the directory in one go as we can. Note that this removes local caching of directories in fscache for the moment as we can't pass the pages to fscache_read_or_alloc_pages() since page->lru is in use by the LRU. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-06 16:17:25 +03:00
inode->i_mapping->a_ops = &afs_dir_aops;
break;
case AFS_FTYPE_SYMLINK:
/* Symlinks with a mode of 0644 are actually mountpoints. */
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
if ((status->mode & 0777) == 0644) {
inode->i_flags |= S_AUTOMOUNT;
set_bit(AFS_VNODE_MOUNTPOINT, &vnode->flags);
inode->i_mode = S_IFDIR | 0555;
inode->i_op = &afs_mntpt_inode_operations;
inode->i_fop = &afs_mntpt_file_operations;
afs: Fix directory handling AFS directories are structured blobs that are downloaded just like files and then parsed by the lookup and readdir code and, as such, are currently handled in the pagecache like any other file, with the entire directory content being thrown away each time the directory changes. However, since the blob is a known structure and since the data version counter on a directory increases by exactly one for each change committed to that directory, we can actually edit the directory locally rather than fetching it from the server after each locally-induced change. What we can't do, though, is mix data from the server and data from the client since the server is technically at liberty to rearrange or compress a directory if it sees fit, provided it updates the data version number when it does so and breaks the callback (ie. sends a notification). Further, lookup with lookup-ahead, readdir and, when it arrives, local editing are likely want to scan the whole of a directory. So directory handling needs to be improved to maintain the coherency of the directory blob prior to permitting local directory editing. To this end: (1) If any directory page gets discarded, invalidate and reread the entire directory. (2) If readpage notes that if when it fetches a single page that the version number has changed, the entire directory is flagged for invalidation. (3) Read as much of the directory in one go as we can. Note that this removes local caching of directories in fscache for the moment as we can't pass the pages to fscache_read_or_alloc_pages() since page->lru is in use by the LRU. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-06 16:17:25 +03:00
inode->i_mapping->a_ops = &afs_fs_aops;
} else {
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
inode->i_mode = S_IFLNK | status->mode;
inode->i_op = &afs_symlink_inode_operations;
afs: Fix directory handling AFS directories are structured blobs that are downloaded just like files and then parsed by the lookup and readdir code and, as such, are currently handled in the pagecache like any other file, with the entire directory content being thrown away each time the directory changes. However, since the blob is a known structure and since the data version counter on a directory increases by exactly one for each change committed to that directory, we can actually edit the directory locally rather than fetching it from the server after each locally-induced change. What we can't do, though, is mix data from the server and data from the client since the server is technically at liberty to rearrange or compress a directory if it sees fit, provided it updates the data version number when it does so and breaks the callback (ie. sends a notification). Further, lookup with lookup-ahead, readdir and, when it arrives, local editing are likely want to scan the whole of a directory. So directory handling needs to be improved to maintain the coherency of the directory blob prior to permitting local directory editing. To this end: (1) If any directory page gets discarded, invalidate and reread the entire directory. (2) If readpage notes that if when it fetches a single page that the version number has changed, the entire directory is flagged for invalidation. (3) Read as much of the directory in one go as we can. Note that this removes local caching of directories in fscache for the moment as we can't pass the pages to fscache_read_or_alloc_pages() since page->lru is in use by the LRU. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-06 16:17:25 +03:00
inode->i_mapping->a_ops = &afs_fs_aops;
}
inode_nohighmem(inode);
break;
default:
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
dump_vnode(vnode, op->file[0].vnode != vnode ? op->file[0].vnode : NULL);
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
write_sequnlock(&vnode->cb_lock);
return afs_protocol_error(NULL, afs_eproto_file_type);
}
afs_set_i_size(vnode, status->size);
afs: Overhaul the callback handling Overhaul the AFS callback handling by the following means: (1) Don't give up callback promises on vnodes that we are no longer using, rather let them just expire on the server or let the server break them. This is actually more efficient for the server as the callback lookup is expensive if there are lots of extant callbacks. (2) Only give up the callback promises we have from a server when the server record is destroyed. Then we can just give up *all* the callback promises on it in one go. (3) Servers can end up being shared between cells if cells are aliased, so don't add all the vnodes being backed by a particular server into a big FID-indexed tree on that server as there may be duplicates. Instead have each volume instance (~= superblock) register an interest in a server as it starts to make use of it and use this to allow the processor for callbacks from the server to find the superblock and thence the inode corresponding to the FID being broken by means of ilookup_nowait(). (4) Rather than iterating over the entire callback list when a mass-break comes in from the server, maintain a counter of mass-breaks in afs_server (cb_seq) and make afs_validate() check it against the copy in afs_vnode. It would be nice not to have to take a read_lock whilst doing this, but that's tricky without using RCU. (5) Save a ref on the fileserver we're using for a call in the afs_call struct so that we can access its cb_s_break during call decoding. (6) Write-lock around callback and status storage in a vnode and read-lock around getattr so that we don't see the status mid-update. This has the following consequences: (1) Data invalidation isn't seen until someone calls afs_validate() on a vnode. Unfortunately, we need to use a key to query the server, but getting one from a background thread is tricky without caching loads of keys all over the place. (2) Mass invalidation isn't seen until someone calls afs_validate(). (3) Callback breaking is going to hit the inode_hash_lock quite a bit. Could this be replaced with rcu_read_lock() since inodes are destroyed under RCU conditions. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:49 +03:00
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
vnode->invalid_before = status->data_version;
inode_set_iversion_raw(&vnode->vfs_inode, status->data_version);
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
if (!vp->scb.have_cb) {
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
/* it's a symlink we just created (the fileserver
* didn't give us a callback) */
vnode->cb_expires_at = ktime_get_real_seconds();
} else {
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
vnode->cb_expires_at = vp->scb.callback.expires_at;
vnode->cb_server = op->server;
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
set_bit(AFS_VNODE_CB_PROMISED, &vnode->flags);
}
write_sequnlock(&vnode->cb_lock);
return 0;
}
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
/*
* Update the core inode struct from a returned status record.
*/
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
static void afs_apply_status(struct afs_operation *op,
struct afs_vnode_param *vp)
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
{
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
struct afs_file_status *status = &vp->scb.status;
struct afs_vnode *vnode = vp->vnode;
struct inode *inode = &vnode->vfs_inode;
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
struct timespec64 t;
umode_t mode;
bool data_changed = false;
bool change_size = vp->set_size;
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
_enter("{%llx:%llu.%u} %s",
vp->fid.vid, vp->fid.vnode, vp->fid.unique,
op->type ? op->type->name : "???");
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
BUG_ON(test_bit(AFS_VNODE_UNSET, &vnode->flags));
if (status->type != vnode->status.type) {
pr_warn("Vnode %llx:%llx:%x changed type %u to %u\n",
vnode->fid.vid,
vnode->fid.vnode,
vnode->fid.unique,
status->type, vnode->status.type);
afs_protocol_error(NULL, afs_eproto_bad_status);
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
return;
}
if (status->nlink != vnode->status.nlink)
set_nlink(inode, status->nlink);
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
if (status->owner != vnode->status.owner)
inode->i_uid = make_kuid(&init_user_ns, status->owner);
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
if (status->group != vnode->status.group)
inode->i_gid = make_kgid(&init_user_ns, status->group);
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
if (status->mode != vnode->status.mode) {
mode = inode->i_mode;
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
mode &= ~S_IALLUGO;
mode |= status->mode;
WRITE_ONCE(inode->i_mode, mode);
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
}
t = status->mtime_client;
inode->i_mtime = t;
if (vp->update_ctime)
inode->i_ctime = op->ctime;
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
if (vnode->status.data_version != status->data_version)
data_changed = true;
vnode->status = *status;
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
if (vp->dv_before + vp->dv_delta != status->data_version) {
if (test_bit(AFS_VNODE_CB_PROMISED, &vnode->flags))
pr_warn("kAFS: vnode modified {%llx:%llu} %llx->%llx %s\n",
vnode->fid.vid, vnode->fid.vnode,
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
(unsigned long long)vp->dv_before + vp->dv_delta,
(unsigned long long)status->data_version,
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
op->type ? op->type->name : "???");
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
vnode->invalid_before = status->data_version;
if (vnode->status.type == AFS_FTYPE_DIR) {
if (test_and_clear_bit(AFS_VNODE_DIR_VALID, &vnode->flags))
afs_stat_v(vnode, n_inval);
} else {
set_bit(AFS_VNODE_ZAP_DATA, &vnode->flags);
}
afs: Fix EOF corruption When doing a partial writeback, afs_write_back_from_locked_page() may generate an FS.StoreData RPC request that writes out part of a file when a file has been constructed from pieces by doing seek, write, seek, write, ... as is done by ld. The FS.StoreData RPC is given the current i_size as the file length, but the server basically ignores it unless the data length is 0 (in which case it's just a truncate operation). The revised file length returned in the result of the RPC may then not reflect what we suggested - and this leads to i_size getting moved backwards - which causes issues later. Fix the client to take account of this by ignoring the returned file size unless the data version number jumped unexpectedly - in which case we're going to have to clear the pagecache and reload anyway. This can be observed when doing a kernel build on an AFS mount. The following pair of commands produce the issue: ld -m elf_x86_64 -z max-page-size=0x200000 --emit-relocs \ -T arch/x86/realmode/rm/realmode.lds \ arch/x86/realmode/rm/header.o \ arch/x86/realmode/rm/trampoline_64.o \ arch/x86/realmode/rm/stack.o \ arch/x86/realmode/rm/reboot.o \ -o arch/x86/realmode/rm/realmode.elf arch/x86/tools/relocs --realmode \ arch/x86/realmode/rm/realmode.elf \ >arch/x86/realmode/rm/realmode.relocs This results in the latter giving: Cannot read ELF section headers 0/18: Success as the realmode.elf file got corrupted. The sequence of events can also be driven with: xfs_io -t -f \ -c "pwrite -S 0x58 0 0x58" \ -c "pwrite -S 0x59 10000 1000" \ -c "close" \ /afs/example.com/scratch/a Fixes: 31143d5d515e ("AFS: implement basic file write support") Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-13 02:03:48 +03:00
change_size = true;
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
} else if (vnode->status.type == AFS_FTYPE_DIR) {
/* Expected directory change is handled elsewhere so
* that we can locally edit the directory and save on a
* download.
*/
if (test_bit(AFS_VNODE_DIR_VALID, &vnode->flags))
data_changed = false;
afs: Fix EOF corruption When doing a partial writeback, afs_write_back_from_locked_page() may generate an FS.StoreData RPC request that writes out part of a file when a file has been constructed from pieces by doing seek, write, seek, write, ... as is done by ld. The FS.StoreData RPC is given the current i_size as the file length, but the server basically ignores it unless the data length is 0 (in which case it's just a truncate operation). The revised file length returned in the result of the RPC may then not reflect what we suggested - and this leads to i_size getting moved backwards - which causes issues later. Fix the client to take account of this by ignoring the returned file size unless the data version number jumped unexpectedly - in which case we're going to have to clear the pagecache and reload anyway. This can be observed when doing a kernel build on an AFS mount. The following pair of commands produce the issue: ld -m elf_x86_64 -z max-page-size=0x200000 --emit-relocs \ -T arch/x86/realmode/rm/realmode.lds \ arch/x86/realmode/rm/header.o \ arch/x86/realmode/rm/trampoline_64.o \ arch/x86/realmode/rm/stack.o \ arch/x86/realmode/rm/reboot.o \ -o arch/x86/realmode/rm/realmode.elf arch/x86/tools/relocs --realmode \ arch/x86/realmode/rm/realmode.elf \ >arch/x86/realmode/rm/realmode.relocs This results in the latter giving: Cannot read ELF section headers 0/18: Success as the realmode.elf file got corrupted. The sequence of events can also be driven with: xfs_io -t -f \ -c "pwrite -S 0x58 0 0x58" \ -c "pwrite -S 0x59 10000 1000" \ -c "close" \ /afs/example.com/scratch/a Fixes: 31143d5d515e ("AFS: implement basic file write support") Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-13 02:03:48 +03:00
change_size = true;
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
}
if (data_changed) {
inode_set_iversion_raw(inode, status->data_version);
afs: Fix EOF corruption When doing a partial writeback, afs_write_back_from_locked_page() may generate an FS.StoreData RPC request that writes out part of a file when a file has been constructed from pieces by doing seek, write, seek, write, ... as is done by ld. The FS.StoreData RPC is given the current i_size as the file length, but the server basically ignores it unless the data length is 0 (in which case it's just a truncate operation). The revised file length returned in the result of the RPC may then not reflect what we suggested - and this leads to i_size getting moved backwards - which causes issues later. Fix the client to take account of this by ignoring the returned file size unless the data version number jumped unexpectedly - in which case we're going to have to clear the pagecache and reload anyway. This can be observed when doing a kernel build on an AFS mount. The following pair of commands produce the issue: ld -m elf_x86_64 -z max-page-size=0x200000 --emit-relocs \ -T arch/x86/realmode/rm/realmode.lds \ arch/x86/realmode/rm/header.o \ arch/x86/realmode/rm/trampoline_64.o \ arch/x86/realmode/rm/stack.o \ arch/x86/realmode/rm/reboot.o \ -o arch/x86/realmode/rm/realmode.elf arch/x86/tools/relocs --realmode \ arch/x86/realmode/rm/realmode.elf \ >arch/x86/realmode/rm/realmode.relocs This results in the latter giving: Cannot read ELF section headers 0/18: Success as the realmode.elf file got corrupted. The sequence of events can also be driven with: xfs_io -t -f \ -c "pwrite -S 0x58 0 0x58" \ -c "pwrite -S 0x59 10000 1000" \ -c "close" \ /afs/example.com/scratch/a Fixes: 31143d5d515e ("AFS: implement basic file write support") Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-13 02:03:48 +03:00
/* Only update the size if the data version jumped. If the
* file is being modified locally, then we might have our own
* idea of what the size should be that's not the same as
* what's on the server.
*/
if (change_size) {
afs: Fix EOF corruption When doing a partial writeback, afs_write_back_from_locked_page() may generate an FS.StoreData RPC request that writes out part of a file when a file has been constructed from pieces by doing seek, write, seek, write, ... as is done by ld. The FS.StoreData RPC is given the current i_size as the file length, but the server basically ignores it unless the data length is 0 (in which case it's just a truncate operation). The revised file length returned in the result of the RPC may then not reflect what we suggested - and this leads to i_size getting moved backwards - which causes issues later. Fix the client to take account of this by ignoring the returned file size unless the data version number jumped unexpectedly - in which case we're going to have to clear the pagecache and reload anyway. This can be observed when doing a kernel build on an AFS mount. The following pair of commands produce the issue: ld -m elf_x86_64 -z max-page-size=0x200000 --emit-relocs \ -T arch/x86/realmode/rm/realmode.lds \ arch/x86/realmode/rm/header.o \ arch/x86/realmode/rm/trampoline_64.o \ arch/x86/realmode/rm/stack.o \ arch/x86/realmode/rm/reboot.o \ -o arch/x86/realmode/rm/realmode.elf arch/x86/tools/relocs --realmode \ arch/x86/realmode/rm/realmode.elf \ >arch/x86/realmode/rm/realmode.relocs This results in the latter giving: Cannot read ELF section headers 0/18: Success as the realmode.elf file got corrupted. The sequence of events can also be driven with: xfs_io -t -f \ -c "pwrite -S 0x58 0 0x58" \ -c "pwrite -S 0x59 10000 1000" \ -c "close" \ /afs/example.com/scratch/a Fixes: 31143d5d515e ("AFS: implement basic file write support") Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-13 02:03:48 +03:00
afs_set_i_size(vnode, status->size);
inode->i_ctime = t;
inode->i_atime = t;
}
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
}
}
/*
* Apply a callback to a vnode.
*/
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
static void afs_apply_callback(struct afs_operation *op,
struct afs_vnode_param *vp)
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
{
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
struct afs_callback *cb = &vp->scb.callback;
struct afs_vnode *vnode = vp->vnode;
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
if (!afs_cb_is_broken(vp->cb_break_before, vnode)) {
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
vnode->cb_expires_at = cb->expires_at;
vnode->cb_server = op->server;
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
set_bit(AFS_VNODE_CB_PROMISED, &vnode->flags);
}
}
/*
* Apply the received status and callback to an inode all in the same critical
* section to avoid races with afs_validate().
*/
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
void afs_vnode_commit_status(struct afs_operation *op, struct afs_vnode_param *vp)
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
{
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
struct afs_vnode *vnode = vp->vnode;
_enter("");
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
write_seqlock(&vnode->cb_lock);
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
if (vp->scb.have_error) {
afs: Fix silly rename Fix AFS's silly rename by the following means: (1) Set the destination directory in afs_do_silly_rename() so as to avoid misbehaviour and indicate that the directory data version will increment by 1 so as to avoid warnings about unexpected changes in the DV. Also indicate that the ctime should be updated to avoid xfstest grumbling. (2) Note when the server indicates that a directory changed more than we expected (AFS_OPERATION_DIR_CONFLICT), indicating a conflict with a third party change, checking on successful completion of unlink and rename. The problem is that the FS.RemoveFile RPC op doesn't report the status of the unlinked file, though YFS.RemoveFile2 does. This can be mitigated by the assumption that if the directory DV cranked by exactly 1, we can be sure we removed one link from the file; further, ordinarily in AFS, files cannot be hardlinked across directories, so if we reduce nlink to 0, the file is deleted. However, if the directory DV jumps by more than 1, we cannot know if a third party intervened by adding or removing a link on the file we just removed a link from. The same also goes for any vnode that is at the destination of the FS.Rename RPC op. (3) Make afs_vnode_commit_status() apply the nlink drop inside the cb_lock section along with the other attribute updates if ->op_unlinked is set on the descriptor for the appropriate vnode. (4) Issue a follow up status fetch to the unlinked file in the event of a third party conflict that makes it impossible for us to know if we actually deleted the file or not. (5) Provide a flag, AFS_VNODE_SILLY_DELETED, to make afs_getattr() lie to the user about the nlink of a silly deleted file so that it appears as 0, not 1. Found with the generic/035 and generic/084 xfstests. Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-15 19:36:58 +03:00
/* A YFS server will return this from RemoveFile2 and AFS and
* YFS will return this from InlineBulkStatus.
*/
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
if (vp->scb.status.abort_code == VNOVNODE) {
set_bit(AFS_VNODE_DELETED, &vnode->flags);
clear_nlink(&vnode->vfs_inode);
__afs_break_callback(vnode, afs_cb_break_for_deleted);
afs: Fix silly rename Fix AFS's silly rename by the following means: (1) Set the destination directory in afs_do_silly_rename() so as to avoid misbehaviour and indicate that the directory data version will increment by 1 so as to avoid warnings about unexpected changes in the DV. Also indicate that the ctime should be updated to avoid xfstest grumbling. (2) Note when the server indicates that a directory changed more than we expected (AFS_OPERATION_DIR_CONFLICT), indicating a conflict with a third party change, checking on successful completion of unlink and rename. The problem is that the FS.RemoveFile RPC op doesn't report the status of the unlinked file, though YFS.RemoveFile2 does. This can be mitigated by the assumption that if the directory DV cranked by exactly 1, we can be sure we removed one link from the file; further, ordinarily in AFS, files cannot be hardlinked across directories, so if we reduce nlink to 0, the file is deleted. However, if the directory DV jumps by more than 1, we cannot know if a third party intervened by adding or removing a link on the file we just removed a link from. The same also goes for any vnode that is at the destination of the FS.Rename RPC op. (3) Make afs_vnode_commit_status() apply the nlink drop inside the cb_lock section along with the other attribute updates if ->op_unlinked is set on the descriptor for the appropriate vnode. (4) Issue a follow up status fetch to the unlinked file in the event of a third party conflict that makes it impossible for us to know if we actually deleted the file or not. (5) Provide a flag, AFS_VNODE_SILLY_DELETED, to make afs_getattr() lie to the user about the nlink of a silly deleted file so that it appears as 0, not 1. Found with the generic/035 and generic/084 xfstests. Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-15 19:36:58 +03:00
op->flags &= ~AFS_OPERATION_DIR_CONFLICT;
}
afs: Fix silly rename Fix AFS's silly rename by the following means: (1) Set the destination directory in afs_do_silly_rename() so as to avoid misbehaviour and indicate that the directory data version will increment by 1 so as to avoid warnings about unexpected changes in the DV. Also indicate that the ctime should be updated to avoid xfstest grumbling. (2) Note when the server indicates that a directory changed more than we expected (AFS_OPERATION_DIR_CONFLICT), indicating a conflict with a third party change, checking on successful completion of unlink and rename. The problem is that the FS.RemoveFile RPC op doesn't report the status of the unlinked file, though YFS.RemoveFile2 does. This can be mitigated by the assumption that if the directory DV cranked by exactly 1, we can be sure we removed one link from the file; further, ordinarily in AFS, files cannot be hardlinked across directories, so if we reduce nlink to 0, the file is deleted. However, if the directory DV jumps by more than 1, we cannot know if a third party intervened by adding or removing a link on the file we just removed a link from. The same also goes for any vnode that is at the destination of the FS.Rename RPC op. (3) Make afs_vnode_commit_status() apply the nlink drop inside the cb_lock section along with the other attribute updates if ->op_unlinked is set on the descriptor for the appropriate vnode. (4) Issue a follow up status fetch to the unlinked file in the event of a third party conflict that makes it impossible for us to know if we actually deleted the file or not. (5) Provide a flag, AFS_VNODE_SILLY_DELETED, to make afs_getattr() lie to the user about the nlink of a silly deleted file so that it appears as 0, not 1. Found with the generic/035 and generic/084 xfstests. Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-15 19:36:58 +03:00
} else if (vp->scb.have_status) {
afs_apply_status(op, vp);
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
if (vp->scb.have_cb)
afs_apply_callback(op, vp);
afs: Fix silly rename Fix AFS's silly rename by the following means: (1) Set the destination directory in afs_do_silly_rename() so as to avoid misbehaviour and indicate that the directory data version will increment by 1 so as to avoid warnings about unexpected changes in the DV. Also indicate that the ctime should be updated to avoid xfstest grumbling. (2) Note when the server indicates that a directory changed more than we expected (AFS_OPERATION_DIR_CONFLICT), indicating a conflict with a third party change, checking on successful completion of unlink and rename. The problem is that the FS.RemoveFile RPC op doesn't report the status of the unlinked file, though YFS.RemoveFile2 does. This can be mitigated by the assumption that if the directory DV cranked by exactly 1, we can be sure we removed one link from the file; further, ordinarily in AFS, files cannot be hardlinked across directories, so if we reduce nlink to 0, the file is deleted. However, if the directory DV jumps by more than 1, we cannot know if a third party intervened by adding or removing a link on the file we just removed a link from. The same also goes for any vnode that is at the destination of the FS.Rename RPC op. (3) Make afs_vnode_commit_status() apply the nlink drop inside the cb_lock section along with the other attribute updates if ->op_unlinked is set on the descriptor for the appropriate vnode. (4) Issue a follow up status fetch to the unlinked file in the event of a third party conflict that makes it impossible for us to know if we actually deleted the file or not. (5) Provide a flag, AFS_VNODE_SILLY_DELETED, to make afs_getattr() lie to the user about the nlink of a silly deleted file so that it appears as 0, not 1. Found with the generic/035 and generic/084 xfstests. Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-15 19:36:58 +03:00
} else if (vp->op_unlinked && !(op->flags & AFS_OPERATION_DIR_CONFLICT)) {
drop_nlink(&vnode->vfs_inode);
if (vnode->vfs_inode.i_nlink == 0) {
set_bit(AFS_VNODE_DELETED, &vnode->flags);
__afs_break_callback(vnode, afs_cb_break_for_deleted);
}
}
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
write_sequnlock(&vnode->cb_lock);
if (vp->scb.have_status)
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
afs_cache_permit(vnode, op->key, vp->cb_break_before, &vp->scb);
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
}
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
static void afs_fetch_status_success(struct afs_operation *op)
{
afs: Fix silly rename Fix AFS's silly rename by the following means: (1) Set the destination directory in afs_do_silly_rename() so as to avoid misbehaviour and indicate that the directory data version will increment by 1 so as to avoid warnings about unexpected changes in the DV. Also indicate that the ctime should be updated to avoid xfstest grumbling. (2) Note when the server indicates that a directory changed more than we expected (AFS_OPERATION_DIR_CONFLICT), indicating a conflict with a third party change, checking on successful completion of unlink and rename. The problem is that the FS.RemoveFile RPC op doesn't report the status of the unlinked file, though YFS.RemoveFile2 does. This can be mitigated by the assumption that if the directory DV cranked by exactly 1, we can be sure we removed one link from the file; further, ordinarily in AFS, files cannot be hardlinked across directories, so if we reduce nlink to 0, the file is deleted. However, if the directory DV jumps by more than 1, we cannot know if a third party intervened by adding or removing a link on the file we just removed a link from. The same also goes for any vnode that is at the destination of the FS.Rename RPC op. (3) Make afs_vnode_commit_status() apply the nlink drop inside the cb_lock section along with the other attribute updates if ->op_unlinked is set on the descriptor for the appropriate vnode. (4) Issue a follow up status fetch to the unlinked file in the event of a third party conflict that makes it impossible for us to know if we actually deleted the file or not. (5) Provide a flag, AFS_VNODE_SILLY_DELETED, to make afs_getattr() lie to the user about the nlink of a silly deleted file so that it appears as 0, not 1. Found with the generic/035 and generic/084 xfstests. Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-15 19:36:58 +03:00
struct afs_vnode_param *vp = &op->file[op->fetch_status.which];
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
struct afs_vnode *vnode = vp->vnode;
int ret;
if (vnode->vfs_inode.i_state & I_NEW) {
ret = afs_inode_init_from_status(op, vp, vnode);
op->error = ret;
if (ret == 0)
afs_cache_permit(vnode, op->key, vp->cb_break_before, &vp->scb);
} else {
afs_vnode_commit_status(op, vp);
}
}
afs: Fix silly rename Fix AFS's silly rename by the following means: (1) Set the destination directory in afs_do_silly_rename() so as to avoid misbehaviour and indicate that the directory data version will increment by 1 so as to avoid warnings about unexpected changes in the DV. Also indicate that the ctime should be updated to avoid xfstest grumbling. (2) Note when the server indicates that a directory changed more than we expected (AFS_OPERATION_DIR_CONFLICT), indicating a conflict with a third party change, checking on successful completion of unlink and rename. The problem is that the FS.RemoveFile RPC op doesn't report the status of the unlinked file, though YFS.RemoveFile2 does. This can be mitigated by the assumption that if the directory DV cranked by exactly 1, we can be sure we removed one link from the file; further, ordinarily in AFS, files cannot be hardlinked across directories, so if we reduce nlink to 0, the file is deleted. However, if the directory DV jumps by more than 1, we cannot know if a third party intervened by adding or removing a link on the file we just removed a link from. The same also goes for any vnode that is at the destination of the FS.Rename RPC op. (3) Make afs_vnode_commit_status() apply the nlink drop inside the cb_lock section along with the other attribute updates if ->op_unlinked is set on the descriptor for the appropriate vnode. (4) Issue a follow up status fetch to the unlinked file in the event of a third party conflict that makes it impossible for us to know if we actually deleted the file or not. (5) Provide a flag, AFS_VNODE_SILLY_DELETED, to make afs_getattr() lie to the user about the nlink of a silly deleted file so that it appears as 0, not 1. Found with the generic/035 and generic/084 xfstests. Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-15 19:36:58 +03:00
const struct afs_operation_ops afs_fetch_status_operation = {
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
.issue_afs_rpc = afs_fs_fetch_status,
.issue_yfs_rpc = yfs_fs_fetch_status,
.success = afs_fetch_status_success,
.aborted = afs_check_for_remote_deletion,
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
};
afs: Overhaul volume and server record caching and fileserver rotation The current code assumes that volumes and servers are per-cell and are never shared, but this is not enforced, and, indeed, public cells do exist that are aliases of each other. Further, an organisation can, say, set up a public cell and a private cell with overlapping, but not identical, sets of servers. The difference is purely in the database attached to the VL servers. The current code will malfunction if it sees a server in two cells as it assumes global address -> server record mappings and that each server is in just one cell. Further, each server may have multiple addresses - and may have addresses of different families (IPv4 and IPv6, say). To this end, the following structural changes are made: (1) Server record management is overhauled: (a) Server records are made independent of cell. The namespace keeps track of them, volume records have lists of them and each vnode has a server on which its callback interest currently resides. (b) The cell record no longer keeps a list of servers known to be in that cell. (c) The server records are now kept in a flat list because there's no single address to sort on. (d) Server records are now keyed by their UUID within the namespace. (e) The addresses for a server are obtained with the VL.GetAddrsU rather than with VL.GetEntryByName, using the server's UUID as a parameter. (f) Cached server records are garbage collected after a period of non-use and are counted out of existence before purging is allowed to complete. This protects the work functions against rmmod. (g) The servers list is now in /proc/fs/afs/servers. (2) Volume record management is overhauled: (a) An RCU-replaceable server list is introduced. This tracks both servers and their coresponding callback interests. (b) The superblock is now keyed on cell record and numeric volume ID. (c) The volume record is now tied to the superblock which mounts it, and is activated when mounted and deactivated when unmounted. This makes it easier to handle the cache cookie without causing a double-use in fscache. (d) The volume record is loaded from the VLDB using VL.GetEntryByNameU to get the server UUID list. (e) The volume name is updated if it is seen to have changed when the volume is updated (the update is keyed on the volume ID). (3) The vlocation record is got rid of and VLDB records are no longer cached. Sufficient information is stored in the volume record, though an update to a volume record is now no longer shared between related volumes (volumes come in bundles of three: R/W, R/O and backup). and the following procedural changes are made: (1) The fileserver cursor introduced previously is now fleshed out and used to iterate over fileservers and their addresses. (2) Volume status is checked during iteration, and the server list is replaced if a change is detected. (3) Server status is checked during iteration, and the address list is replaced if a change is detected. (4) The abort code is saved into the address list cursor and -ECONNABORTED returned in afs_make_call() if a remote abort happened rather than translating the abort into an error message. This allows actions to be taken depending on the abort code more easily. (a) If a VMOVED abort is seen then this is handled by rechecking the volume and restarting the iteration. (b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is handled by sleeping for a short period and retrying and/or trying other servers that might serve that volume. A message is also displayed once until the condition has cleared. (c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the moment. (d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to see if it has been deleted; if not, the fileserver is probably indicating that the volume couldn't be attached and needs salvaging. (e) If statfs() sees one of these aborts, it does not sleep, but rather returns an error, so as not to block the umount program. (5) The fileserver iteration functions in vnode.c are now merged into their callers and more heavily macroised around the cursor. vnode.c is removed. (6) Operations on a particular vnode are serialised on that vnode because the server will lock that vnode whilst it operates on it, so a second op sent will just have to wait. (7) Fileservers are probed with FS.GetCapabilities before being used. This is where service upgrade will be done. (8) A callback interest on a fileserver is set up before an FS operation is performed and passed through to afs_make_call() so that it can be set on the vnode if the operation returns a callback. The callback interest is passed through to afs_iget() also so that it can be set there too. In general, record updating is done on an as-needed basis when we try to access servers, volumes or vnodes rather than offloading it to work items and special threads. Notes: (1) Pre AFS-3.4 servers are no longer supported, though this can be added back if necessary (AFS-3.4 was released in 1998). (2) VBUSY is retried forever for the moment at intervals of 1s. (3) /proc/fs/afs/<cell>/servers no longer exists. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:50 +03:00
/*
* Fetch file status from the volume.
*/
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
int afs_fetch_status(struct afs_vnode *vnode, struct key *key, bool is_new,
afs_access_t *_caller_access)
afs: Overhaul volume and server record caching and fileserver rotation The current code assumes that volumes and servers are per-cell and are never shared, but this is not enforced, and, indeed, public cells do exist that are aliases of each other. Further, an organisation can, say, set up a public cell and a private cell with overlapping, but not identical, sets of servers. The difference is purely in the database attached to the VL servers. The current code will malfunction if it sees a server in two cells as it assumes global address -> server record mappings and that each server is in just one cell. Further, each server may have multiple addresses - and may have addresses of different families (IPv4 and IPv6, say). To this end, the following structural changes are made: (1) Server record management is overhauled: (a) Server records are made independent of cell. The namespace keeps track of them, volume records have lists of them and each vnode has a server on which its callback interest currently resides. (b) The cell record no longer keeps a list of servers known to be in that cell. (c) The server records are now kept in a flat list because there's no single address to sort on. (d) Server records are now keyed by their UUID within the namespace. (e) The addresses for a server are obtained with the VL.GetAddrsU rather than with VL.GetEntryByName, using the server's UUID as a parameter. (f) Cached server records are garbage collected after a period of non-use and are counted out of existence before purging is allowed to complete. This protects the work functions against rmmod. (g) The servers list is now in /proc/fs/afs/servers. (2) Volume record management is overhauled: (a) An RCU-replaceable server list is introduced. This tracks both servers and their coresponding callback interests. (b) The superblock is now keyed on cell record and numeric volume ID. (c) The volume record is now tied to the superblock which mounts it, and is activated when mounted and deactivated when unmounted. This makes it easier to handle the cache cookie without causing a double-use in fscache. (d) The volume record is loaded from the VLDB using VL.GetEntryByNameU to get the server UUID list. (e) The volume name is updated if it is seen to have changed when the volume is updated (the update is keyed on the volume ID). (3) The vlocation record is got rid of and VLDB records are no longer cached. Sufficient information is stored in the volume record, though an update to a volume record is now no longer shared between related volumes (volumes come in bundles of three: R/W, R/O and backup). and the following procedural changes are made: (1) The fileserver cursor introduced previously is now fleshed out and used to iterate over fileservers and their addresses. (2) Volume status is checked during iteration, and the server list is replaced if a change is detected. (3) Server status is checked during iteration, and the address list is replaced if a change is detected. (4) The abort code is saved into the address list cursor and -ECONNABORTED returned in afs_make_call() if a remote abort happened rather than translating the abort into an error message. This allows actions to be taken depending on the abort code more easily. (a) If a VMOVED abort is seen then this is handled by rechecking the volume and restarting the iteration. (b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is handled by sleeping for a short period and retrying and/or trying other servers that might serve that volume. A message is also displayed once until the condition has cleared. (c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the moment. (d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to see if it has been deleted; if not, the fileserver is probably indicating that the volume couldn't be attached and needs salvaging. (e) If statfs() sees one of these aborts, it does not sleep, but rather returns an error, so as not to block the umount program. (5) The fileserver iteration functions in vnode.c are now merged into their callers and more heavily macroised around the cursor. vnode.c is removed. (6) Operations on a particular vnode are serialised on that vnode because the server will lock that vnode whilst it operates on it, so a second op sent will just have to wait. (7) Fileservers are probed with FS.GetCapabilities before being used. This is where service upgrade will be done. (8) A callback interest on a fileserver is set up before an FS operation is performed and passed through to afs_make_call() so that it can be set on the vnode if the operation returns a callback. The callback interest is passed through to afs_iget() also so that it can be set there too. In general, record updating is done on an as-needed basis when we try to access servers, volumes or vnodes rather than offloading it to work items and special threads. Notes: (1) Pre AFS-3.4 servers are no longer supported, though this can be added back if necessary (AFS-3.4 was released in 1998). (2) VBUSY is retried forever for the moment at intervals of 1s. (3) /proc/fs/afs/<cell>/servers no longer exists. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:50 +03:00
{
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
struct afs_operation *op;
afs: Overhaul volume and server record caching and fileserver rotation The current code assumes that volumes and servers are per-cell and are never shared, but this is not enforced, and, indeed, public cells do exist that are aliases of each other. Further, an organisation can, say, set up a public cell and a private cell with overlapping, but not identical, sets of servers. The difference is purely in the database attached to the VL servers. The current code will malfunction if it sees a server in two cells as it assumes global address -> server record mappings and that each server is in just one cell. Further, each server may have multiple addresses - and may have addresses of different families (IPv4 and IPv6, say). To this end, the following structural changes are made: (1) Server record management is overhauled: (a) Server records are made independent of cell. The namespace keeps track of them, volume records have lists of them and each vnode has a server on which its callback interest currently resides. (b) The cell record no longer keeps a list of servers known to be in that cell. (c) The server records are now kept in a flat list because there's no single address to sort on. (d) Server records are now keyed by their UUID within the namespace. (e) The addresses for a server are obtained with the VL.GetAddrsU rather than with VL.GetEntryByName, using the server's UUID as a parameter. (f) Cached server records are garbage collected after a period of non-use and are counted out of existence before purging is allowed to complete. This protects the work functions against rmmod. (g) The servers list is now in /proc/fs/afs/servers. (2) Volume record management is overhauled: (a) An RCU-replaceable server list is introduced. This tracks both servers and their coresponding callback interests. (b) The superblock is now keyed on cell record and numeric volume ID. (c) The volume record is now tied to the superblock which mounts it, and is activated when mounted and deactivated when unmounted. This makes it easier to handle the cache cookie without causing a double-use in fscache. (d) The volume record is loaded from the VLDB using VL.GetEntryByNameU to get the server UUID list. (e) The volume name is updated if it is seen to have changed when the volume is updated (the update is keyed on the volume ID). (3) The vlocation record is got rid of and VLDB records are no longer cached. Sufficient information is stored in the volume record, though an update to a volume record is now no longer shared between related volumes (volumes come in bundles of three: R/W, R/O and backup). and the following procedural changes are made: (1) The fileserver cursor introduced previously is now fleshed out and used to iterate over fileservers and their addresses. (2) Volume status is checked during iteration, and the server list is replaced if a change is detected. (3) Server status is checked during iteration, and the address list is replaced if a change is detected. (4) The abort code is saved into the address list cursor and -ECONNABORTED returned in afs_make_call() if a remote abort happened rather than translating the abort into an error message. This allows actions to be taken depending on the abort code more easily. (a) If a VMOVED abort is seen then this is handled by rechecking the volume and restarting the iteration. (b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is handled by sleeping for a short period and retrying and/or trying other servers that might serve that volume. A message is also displayed once until the condition has cleared. (c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the moment. (d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to see if it has been deleted; if not, the fileserver is probably indicating that the volume couldn't be attached and needs salvaging. (e) If statfs() sees one of these aborts, it does not sleep, but rather returns an error, so as not to block the umount program. (5) The fileserver iteration functions in vnode.c are now merged into their callers and more heavily macroised around the cursor. vnode.c is removed. (6) Operations on a particular vnode are serialised on that vnode because the server will lock that vnode whilst it operates on it, so a second op sent will just have to wait. (7) Fileservers are probed with FS.GetCapabilities before being used. This is where service upgrade will be done. (8) A callback interest on a fileserver is set up before an FS operation is performed and passed through to afs_make_call() so that it can be set on the vnode if the operation returns a callback. The callback interest is passed through to afs_iget() also so that it can be set there too. In general, record updating is done on an as-needed basis when we try to access servers, volumes or vnodes rather than offloading it to work items and special threads. Notes: (1) Pre AFS-3.4 servers are no longer supported, though this can be added back if necessary (AFS-3.4 was released in 1998). (2) VBUSY is retried forever for the moment at intervals of 1s. (3) /proc/fs/afs/<cell>/servers no longer exists. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:50 +03:00
_enter("%s,{%llx:%llu.%u,S=%lx}",
afs: Overhaul volume and server record caching and fileserver rotation The current code assumes that volumes and servers are per-cell and are never shared, but this is not enforced, and, indeed, public cells do exist that are aliases of each other. Further, an organisation can, say, set up a public cell and a private cell with overlapping, but not identical, sets of servers. The difference is purely in the database attached to the VL servers. The current code will malfunction if it sees a server in two cells as it assumes global address -> server record mappings and that each server is in just one cell. Further, each server may have multiple addresses - and may have addresses of different families (IPv4 and IPv6, say). To this end, the following structural changes are made: (1) Server record management is overhauled: (a) Server records are made independent of cell. The namespace keeps track of them, volume records have lists of them and each vnode has a server on which its callback interest currently resides. (b) The cell record no longer keeps a list of servers known to be in that cell. (c) The server records are now kept in a flat list because there's no single address to sort on. (d) Server records are now keyed by their UUID within the namespace. (e) The addresses for a server are obtained with the VL.GetAddrsU rather than with VL.GetEntryByName, using the server's UUID as a parameter. (f) Cached server records are garbage collected after a period of non-use and are counted out of existence before purging is allowed to complete. This protects the work functions against rmmod. (g) The servers list is now in /proc/fs/afs/servers. (2) Volume record management is overhauled: (a) An RCU-replaceable server list is introduced. This tracks both servers and their coresponding callback interests. (b) The superblock is now keyed on cell record and numeric volume ID. (c) The volume record is now tied to the superblock which mounts it, and is activated when mounted and deactivated when unmounted. This makes it easier to handle the cache cookie without causing a double-use in fscache. (d) The volume record is loaded from the VLDB using VL.GetEntryByNameU to get the server UUID list. (e) The volume name is updated if it is seen to have changed when the volume is updated (the update is keyed on the volume ID). (3) The vlocation record is got rid of and VLDB records are no longer cached. Sufficient information is stored in the volume record, though an update to a volume record is now no longer shared between related volumes (volumes come in bundles of three: R/W, R/O and backup). and the following procedural changes are made: (1) The fileserver cursor introduced previously is now fleshed out and used to iterate over fileservers and their addresses. (2) Volume status is checked during iteration, and the server list is replaced if a change is detected. (3) Server status is checked during iteration, and the address list is replaced if a change is detected. (4) The abort code is saved into the address list cursor and -ECONNABORTED returned in afs_make_call() if a remote abort happened rather than translating the abort into an error message. This allows actions to be taken depending on the abort code more easily. (a) If a VMOVED abort is seen then this is handled by rechecking the volume and restarting the iteration. (b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is handled by sleeping for a short period and retrying and/or trying other servers that might serve that volume. A message is also displayed once until the condition has cleared. (c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the moment. (d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to see if it has been deleted; if not, the fileserver is probably indicating that the volume couldn't be attached and needs salvaging. (e) If statfs() sees one of these aborts, it does not sleep, but rather returns an error, so as not to block the umount program. (5) The fileserver iteration functions in vnode.c are now merged into their callers and more heavily macroised around the cursor. vnode.c is removed. (6) Operations on a particular vnode are serialised on that vnode because the server will lock that vnode whilst it operates on it, so a second op sent will just have to wait. (7) Fileservers are probed with FS.GetCapabilities before being used. This is where service upgrade will be done. (8) A callback interest on a fileserver is set up before an FS operation is performed and passed through to afs_make_call() so that it can be set on the vnode if the operation returns a callback. The callback interest is passed through to afs_iget() also so that it can be set there too. In general, record updating is done on an as-needed basis when we try to access servers, volumes or vnodes rather than offloading it to work items and special threads. Notes: (1) Pre AFS-3.4 servers are no longer supported, though this can be added back if necessary (AFS-3.4 was released in 1998). (2) VBUSY is retried forever for the moment at intervals of 1s. (3) /proc/fs/afs/<cell>/servers no longer exists. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:50 +03:00
vnode->volume->name,
vnode->fid.vid, vnode->fid.vnode, vnode->fid.unique,
vnode->flags);
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
op = afs_alloc_operation(key, vnode->volume);
if (IS_ERR(op))
return PTR_ERR(op);
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
afs_op_set_vnode(op, 0, vnode);
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
op->nr_files = 1;
op->ops = &afs_fetch_status_operation;
afs_begin_vnode_operation(op);
afs_wait_for_operation(op);
afs: Overhaul volume and server record caching and fileserver rotation The current code assumes that volumes and servers are per-cell and are never shared, but this is not enforced, and, indeed, public cells do exist that are aliases of each other. Further, an organisation can, say, set up a public cell and a private cell with overlapping, but not identical, sets of servers. The difference is purely in the database attached to the VL servers. The current code will malfunction if it sees a server in two cells as it assumes global address -> server record mappings and that each server is in just one cell. Further, each server may have multiple addresses - and may have addresses of different families (IPv4 and IPv6, say). To this end, the following structural changes are made: (1) Server record management is overhauled: (a) Server records are made independent of cell. The namespace keeps track of them, volume records have lists of them and each vnode has a server on which its callback interest currently resides. (b) The cell record no longer keeps a list of servers known to be in that cell. (c) The server records are now kept in a flat list because there's no single address to sort on. (d) Server records are now keyed by their UUID within the namespace. (e) The addresses for a server are obtained with the VL.GetAddrsU rather than with VL.GetEntryByName, using the server's UUID as a parameter. (f) Cached server records are garbage collected after a period of non-use and are counted out of existence before purging is allowed to complete. This protects the work functions against rmmod. (g) The servers list is now in /proc/fs/afs/servers. (2) Volume record management is overhauled: (a) An RCU-replaceable server list is introduced. This tracks both servers and their coresponding callback interests. (b) The superblock is now keyed on cell record and numeric volume ID. (c) The volume record is now tied to the superblock which mounts it, and is activated when mounted and deactivated when unmounted. This makes it easier to handle the cache cookie without causing a double-use in fscache. (d) The volume record is loaded from the VLDB using VL.GetEntryByNameU to get the server UUID list. (e) The volume name is updated if it is seen to have changed when the volume is updated (the update is keyed on the volume ID). (3) The vlocation record is got rid of and VLDB records are no longer cached. Sufficient information is stored in the volume record, though an update to a volume record is now no longer shared between related volumes (volumes come in bundles of three: R/W, R/O and backup). and the following procedural changes are made: (1) The fileserver cursor introduced previously is now fleshed out and used to iterate over fileservers and their addresses. (2) Volume status is checked during iteration, and the server list is replaced if a change is detected. (3) Server status is checked during iteration, and the address list is replaced if a change is detected. (4) The abort code is saved into the address list cursor and -ECONNABORTED returned in afs_make_call() if a remote abort happened rather than translating the abort into an error message. This allows actions to be taken depending on the abort code more easily. (a) If a VMOVED abort is seen then this is handled by rechecking the volume and restarting the iteration. (b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is handled by sleeping for a short period and retrying and/or trying other servers that might serve that volume. A message is also displayed once until the condition has cleared. (c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the moment. (d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to see if it has been deleted; if not, the fileserver is probably indicating that the volume couldn't be attached and needs salvaging. (e) If statfs() sees one of these aborts, it does not sleep, but rather returns an error, so as not to block the umount program. (5) The fileserver iteration functions in vnode.c are now merged into their callers and more heavily macroised around the cursor. vnode.c is removed. (6) Operations on a particular vnode are serialised on that vnode because the server will lock that vnode whilst it operates on it, so a second op sent will just have to wait. (7) Fileservers are probed with FS.GetCapabilities before being used. This is where service upgrade will be done. (8) A callback interest on a fileserver is set up before an FS operation is performed and passed through to afs_make_call() so that it can be set on the vnode if the operation returns a callback. The callback interest is passed through to afs_iget() also so that it can be set there too. In general, record updating is done on an as-needed basis when we try to access servers, volumes or vnodes rather than offloading it to work items and special threads. Notes: (1) Pre AFS-3.4 servers are no longer supported, though this can be added back if necessary (AFS-3.4 was released in 1998). (2) VBUSY is retried forever for the moment at intervals of 1s. (3) /proc/fs/afs/<cell>/servers no longer exists. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:50 +03:00
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
if (_caller_access)
*_caller_access = op->file[0].scb.status.caller_access;
return afs_put_operation(op);
afs: Overhaul volume and server record caching and fileserver rotation The current code assumes that volumes and servers are per-cell and are never shared, but this is not enforced, and, indeed, public cells do exist that are aliases of each other. Further, an organisation can, say, set up a public cell and a private cell with overlapping, but not identical, sets of servers. The difference is purely in the database attached to the VL servers. The current code will malfunction if it sees a server in two cells as it assumes global address -> server record mappings and that each server is in just one cell. Further, each server may have multiple addresses - and may have addresses of different families (IPv4 and IPv6, say). To this end, the following structural changes are made: (1) Server record management is overhauled: (a) Server records are made independent of cell. The namespace keeps track of them, volume records have lists of them and each vnode has a server on which its callback interest currently resides. (b) The cell record no longer keeps a list of servers known to be in that cell. (c) The server records are now kept in a flat list because there's no single address to sort on. (d) Server records are now keyed by their UUID within the namespace. (e) The addresses for a server are obtained with the VL.GetAddrsU rather than with VL.GetEntryByName, using the server's UUID as a parameter. (f) Cached server records are garbage collected after a period of non-use and are counted out of existence before purging is allowed to complete. This protects the work functions against rmmod. (g) The servers list is now in /proc/fs/afs/servers. (2) Volume record management is overhauled: (a) An RCU-replaceable server list is introduced. This tracks both servers and their coresponding callback interests. (b) The superblock is now keyed on cell record and numeric volume ID. (c) The volume record is now tied to the superblock which mounts it, and is activated when mounted and deactivated when unmounted. This makes it easier to handle the cache cookie without causing a double-use in fscache. (d) The volume record is loaded from the VLDB using VL.GetEntryByNameU to get the server UUID list. (e) The volume name is updated if it is seen to have changed when the volume is updated (the update is keyed on the volume ID). (3) The vlocation record is got rid of and VLDB records are no longer cached. Sufficient information is stored in the volume record, though an update to a volume record is now no longer shared between related volumes (volumes come in bundles of three: R/W, R/O and backup). and the following procedural changes are made: (1) The fileserver cursor introduced previously is now fleshed out and used to iterate over fileservers and their addresses. (2) Volume status is checked during iteration, and the server list is replaced if a change is detected. (3) Server status is checked during iteration, and the address list is replaced if a change is detected. (4) The abort code is saved into the address list cursor and -ECONNABORTED returned in afs_make_call() if a remote abort happened rather than translating the abort into an error message. This allows actions to be taken depending on the abort code more easily. (a) If a VMOVED abort is seen then this is handled by rechecking the volume and restarting the iteration. (b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is handled by sleeping for a short period and retrying and/or trying other servers that might serve that volume. A message is also displayed once until the condition has cleared. (c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the moment. (d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to see if it has been deleted; if not, the fileserver is probably indicating that the volume couldn't be attached and needs salvaging. (e) If statfs() sees one of these aborts, it does not sleep, but rather returns an error, so as not to block the umount program. (5) The fileserver iteration functions in vnode.c are now merged into their callers and more heavily macroised around the cursor. vnode.c is removed. (6) Operations on a particular vnode are serialised on that vnode because the server will lock that vnode whilst it operates on it, so a second op sent will just have to wait. (7) Fileservers are probed with FS.GetCapabilities before being used. This is where service upgrade will be done. (8) A callback interest on a fileserver is set up before an FS operation is performed and passed through to afs_make_call() so that it can be set on the vnode if the operation returns a callback. The callback interest is passed through to afs_iget() also so that it can be set there too. In general, record updating is done on an as-needed basis when we try to access servers, volumes or vnodes rather than offloading it to work items and special threads. Notes: (1) Pre AFS-3.4 servers are no longer supported, though this can be added back if necessary (AFS-3.4 was released in 1998). (2) VBUSY is retried forever for the moment at intervals of 1s. (3) /proc/fs/afs/<cell>/servers no longer exists. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:50 +03:00
}
/*
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
* ilookup() comparator
*/
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
int afs_ilookup5_test_by_fid(struct inode *inode, void *opaque)
{
struct afs_vnode *vnode = AFS_FS_I(inode);
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
struct afs_fid *fid = opaque;
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
return (fid->vnode == vnode->fid.vnode &&
fid->vnode_hi == vnode->fid.vnode_hi &&
fid->unique == vnode->fid.unique);
}
/*
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
* iget5() comparator
*/
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
static int afs_iget5_test(struct inode *inode, void *opaque)
{
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
struct afs_vnode_param *vp = opaque;
//struct afs_vnode *vnode = AFS_FS_I(inode);
return afs_ilookup5_test_by_fid(inode, &vp->fid);
}
/*
* iget5() inode initialiser
*/
static int afs_iget5_set(struct inode *inode, void *opaque)
{
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
struct afs_vnode_param *vp = opaque;
struct afs_super_info *as = AFS_FS_S(inode->i_sb);
struct afs_vnode *vnode = AFS_FS_I(inode);
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
vnode->volume = as->volume;
vnode->fid = vp->fid;
/* YFS supports 96-bit vnode IDs, but Linux only supports
* 64-bit inode numbers.
*/
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
inode->i_ino = vnode->fid.vnode;
inode->i_generation = vnode->fid.unique;
return 0;
}
/*
* Get a cache cookie for an inode.
*/
static void afs_get_inode_cache(struct afs_vnode *vnode)
{
#ifdef CONFIG_AFS_FSCACHE
struct {
u32 vnode_id;
u32 unique;
u32 vnode_id_ext[2]; /* Allow for a 96-bit key */
} __packed key;
struct afs_vnode_cache_aux aux;
afs: Fix directory handling AFS directories are structured blobs that are downloaded just like files and then parsed by the lookup and readdir code and, as such, are currently handled in the pagecache like any other file, with the entire directory content being thrown away each time the directory changes. However, since the blob is a known structure and since the data version counter on a directory increases by exactly one for each change committed to that directory, we can actually edit the directory locally rather than fetching it from the server after each locally-induced change. What we can't do, though, is mix data from the server and data from the client since the server is technically at liberty to rearrange or compress a directory if it sees fit, provided it updates the data version number when it does so and breaks the callback (ie. sends a notification). Further, lookup with lookup-ahead, readdir and, when it arrives, local editing are likely want to scan the whole of a directory. So directory handling needs to be improved to maintain the coherency of the directory blob prior to permitting local directory editing. To this end: (1) If any directory page gets discarded, invalidate and reread the entire directory. (2) If readpage notes that if when it fetches a single page that the version number has changed, the entire directory is flagged for invalidation. (3) Read as much of the directory in one go as we can. Note that this removes local caching of directories in fscache for the moment as we can't pass the pages to fscache_read_or_alloc_pages() since page->lru is in use by the LRU. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-06 16:17:25 +03:00
if (vnode->status.type == AFS_FTYPE_DIR) {
vnode->cache = NULL;
return;
}
key.vnode_id = vnode->fid.vnode;
key.unique = vnode->fid.unique;
key.vnode_id_ext[0] = vnode->fid.vnode >> 32;
key.vnode_id_ext[1] = vnode->fid.vnode_hi;
aux.data_version = vnode->status.data_version;
vnode->cache = fscache_acquire_cookie(vnode->volume->cache,
&afs_vnode_cache_index_def,
&key, sizeof(key),
&aux, sizeof(aux),
vnode, vnode->status.size, true);
#endif
}
/*
* inode retrieval
*/
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
struct inode *afs_iget(struct afs_operation *op, struct afs_vnode_param *vp)
{
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
struct afs_vnode_param *dvp = &op->file[0];
struct super_block *sb = dvp->vnode->vfs_inode.i_sb;
struct afs_vnode *vnode;
struct inode *inode;
int ret;
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
_enter(",{%llx:%llu.%u},,", vp->fid.vid, vp->fid.vnode, vp->fid.unique);
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
inode = iget5_locked(sb, vp->fid.vnode, afs_iget5_test, afs_iget5_set, vp);
if (!inode) {
_leave(" = -ENOMEM");
return ERR_PTR(-ENOMEM);
}
vnode = AFS_FS_I(inode);
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
_debug("GOT INODE %p { vl=%llx vn=%llx, u=%x }",
inode, vnode->fid.vid, vnode->fid.vnode, vnode->fid.unique);
/* deal with an existing inode */
if (!(inode->i_state & I_NEW)) {
_leave(" = %p", inode);
return inode;
}
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
ret = afs_inode_init_from_status(op, vp, vnode);
if (ret < 0)
goto bad_inode;
afs_get_inode_cache(vnode);
/* success */
clear_bit(AFS_VNODE_UNSET, &vnode->flags);
unlock_new_inode(inode);
_leave(" = %p", inode);
return inode;
/* failure */
bad_inode:
iget_failed(inode);
_leave(" = %d [bad]", ret);
return ERR_PTR(ret);
}
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
static int afs_iget5_set_root(struct inode *inode, void *opaque)
{
struct afs_super_info *as = AFS_FS_S(inode->i_sb);
struct afs_vnode *vnode = AFS_FS_I(inode);
vnode->volume = as->volume;
vnode->fid.vid = as->volume->vid,
vnode->fid.vnode = 1;
vnode->fid.unique = 1;
inode->i_ino = 1;
inode->i_generation = 1;
return 0;
}
/*
* Set up the root inode for a volume. This is always vnode 1, unique 1 within
* the volume.
*/
struct inode *afs_root_iget(struct super_block *sb, struct key *key)
{
struct afs_super_info *as = AFS_FS_S(sb);
struct afs_operation *op;
struct afs_vnode *vnode;
struct inode *inode;
int ret;
_enter(",{%llx},,", as->volume->vid);
inode = iget5_locked(sb, 1, NULL, afs_iget5_set_root, NULL);
if (!inode) {
_leave(" = -ENOMEM");
return ERR_PTR(-ENOMEM);
}
_debug("GOT ROOT INODE %p { vl=%llx }", inode, as->volume->vid);
BUG_ON(!(inode->i_state & I_NEW));
vnode = AFS_FS_I(inode);
vnode->cb_v_break = as->volume->cb_v_break,
op = afs_alloc_operation(key, as->volume);
if (IS_ERR(op)) {
ret = PTR_ERR(op);
goto error;
}
afs_op_set_vnode(op, 0, vnode);
op->nr_files = 1;
op->ops = &afs_fetch_status_operation;
ret = afs_do_sync_operation(op);
if (ret < 0)
goto error;
afs_get_inode_cache(vnode);
clear_bit(AFS_VNODE_UNSET, &vnode->flags);
unlock_new_inode(inode);
_leave(" = %p", inode);
return inode;
error:
iget_failed(inode);
_leave(" = %d [bad]", ret);
return ERR_PTR(ret);
}
/*
* mark the data attached to an inode as obsolete due to a write on the server
* - might also want to ditch all the outstanding writes and dirty pages
*/
static void afs_zap_data(struct afs_vnode *vnode)
{
_enter("{%llx:%llu}", vnode->fid.vid, vnode->fid.vnode);
#ifdef CONFIG_AFS_FSCACHE
fscache_invalidate(vnode->cache);
#endif
/* nuke all the non-dirty pages that aren't locked, mapped or being
* written back in a regular file and completely discard the pages in a
* directory or symlink */
if (S_ISREG(vnode->vfs_inode.i_mode))
invalidate_remote_inode(&vnode->vfs_inode);
else
invalidate_inode_pages2(vnode->vfs_inode.i_mapping);
}
/*
* Get the server reinit counter for a vnode's current server.
*/
static bool afs_get_s_break_rcu(struct afs_vnode *vnode, unsigned int *_s_break)
{
struct afs_server_list *slist = rcu_dereference(vnode->volume->servers);
struct afs_server *server;
int i;
for (i = 0; i < slist->nr_servers; i++) {
server = slist->servers[i].server;
if (server == vnode->cb_server) {
*_s_break = READ_ONCE(server->cb_s_break);
return true;
}
}
return false;
}
/*
* Check the validity of a vnode/inode.
*/
bool afs_check_validity(struct afs_vnode *vnode)
{
struct afs_volume *volume = vnode->volume;
enum afs_cb_break_reason need_clear = afs_cb_break_no_break;
afs: Overhaul the callback handling Overhaul the AFS callback handling by the following means: (1) Don't give up callback promises on vnodes that we are no longer using, rather let them just expire on the server or let the server break them. This is actually more efficient for the server as the callback lookup is expensive if there are lots of extant callbacks. (2) Only give up the callback promises we have from a server when the server record is destroyed. Then we can just give up *all* the callback promises on it in one go. (3) Servers can end up being shared between cells if cells are aliased, so don't add all the vnodes being backed by a particular server into a big FID-indexed tree on that server as there may be duplicates. Instead have each volume instance (~= superblock) register an interest in a server as it starts to make use of it and use this to allow the processor for callbacks from the server to find the superblock and thence the inode corresponding to the FID being broken by means of ilookup_nowait(). (4) Rather than iterating over the entire callback list when a mass-break comes in from the server, maintain a counter of mass-breaks in afs_server (cb_seq) and make afs_validate() check it against the copy in afs_vnode. It would be nice not to have to take a read_lock whilst doing this, but that's tricky without using RCU. (5) Save a ref on the fileserver we're using for a call in the afs_call struct so that we can access its cb_s_break during call decoding. (6) Write-lock around callback and status storage in a vnode and read-lock around getattr so that we don't see the status mid-update. This has the following consequences: (1) Data invalidation isn't seen until someone calls afs_validate() on a vnode. Unfortunately, we need to use a key to query the server, but getting one from a background thread is tricky without caching loads of keys all over the place. (2) Mass invalidation isn't seen until someone calls afs_validate(). (3) Callback breaking is going to hit the inode_hash_lock quite a bit. Could this be replaced with rcu_read_lock() since inodes are destroyed under RCU conditions. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:49 +03:00
time64_t now = ktime_get_real_seconds();
bool valid;
unsigned int cb_break, cb_s_break, cb_v_break;
int seq = 0;
do {
read_seqbegin_or_lock(&vnode->cb_lock, &seq);
cb_v_break = READ_ONCE(volume->cb_v_break);
cb_break = vnode->cb_break;
if (test_bit(AFS_VNODE_CB_PROMISED, &vnode->flags) &&
afs_get_s_break_rcu(vnode, &cb_s_break)) {
if (vnode->cb_s_break != cb_s_break ||
vnode->cb_v_break != cb_v_break) {
vnode->cb_s_break = cb_s_break;
vnode->cb_v_break = cb_v_break;
need_clear = afs_cb_break_for_vsbreak;
valid = false;
} else if (test_bit(AFS_VNODE_ZAP_DATA, &vnode->flags)) {
need_clear = afs_cb_break_for_zap;
valid = false;
} else if (vnode->cb_expires_at - 10 <= now) {
need_clear = afs_cb_break_for_lapsed;
valid = false;
} else {
valid = true;
}
} else if (test_bit(AFS_VNODE_DELETED, &vnode->flags)) {
valid = true;
} else {
vnode->cb_v_break = cb_v_break;
valid = false;
}
} while (need_seqretry(&vnode->cb_lock, seq));
done_seqretry(&vnode->cb_lock, seq);
if (need_clear != afs_cb_break_no_break) {
write_seqlock(&vnode->cb_lock);
if (cb_break == vnode->cb_break)
__afs_break_callback(vnode, need_clear);
else
trace_afs_cb_miss(&vnode->fid, need_clear);
write_sequnlock(&vnode->cb_lock);
valid = false;
}
return valid;
}
/*
* validate a vnode/inode
* - there are several things we need to check
* - parent dir data changes (rm, rmdir, rename, mkdir, create, link,
* symlink)
* - parent dir metadata changed (security changes)
* - dentry data changed (write, truncate)
* - dentry metadata changed (security changes)
*/
int afs_validate(struct afs_vnode *vnode, struct key *key)
{
bool valid;
int ret;
_enter("{v={%llx:%llu} fl=%lx},%x",
vnode->fid.vid, vnode->fid.vnode, vnode->flags,
key_serial(key));
rcu_read_lock();
valid = afs_check_validity(vnode);
rcu_read_unlock();
if (test_bit(AFS_VNODE_DELETED, &vnode->flags))
clear_nlink(&vnode->vfs_inode);
afs: Overhaul the callback handling Overhaul the AFS callback handling by the following means: (1) Don't give up callback promises on vnodes that we are no longer using, rather let them just expire on the server or let the server break them. This is actually more efficient for the server as the callback lookup is expensive if there are lots of extant callbacks. (2) Only give up the callback promises we have from a server when the server record is destroyed. Then we can just give up *all* the callback promises on it in one go. (3) Servers can end up being shared between cells if cells are aliased, so don't add all the vnodes being backed by a particular server into a big FID-indexed tree on that server as there may be duplicates. Instead have each volume instance (~= superblock) register an interest in a server as it starts to make use of it and use this to allow the processor for callbacks from the server to find the superblock and thence the inode corresponding to the FID being broken by means of ilookup_nowait(). (4) Rather than iterating over the entire callback list when a mass-break comes in from the server, maintain a counter of mass-breaks in afs_server (cb_seq) and make afs_validate() check it against the copy in afs_vnode. It would be nice not to have to take a read_lock whilst doing this, but that's tricky without using RCU. (5) Save a ref on the fileserver we're using for a call in the afs_call struct so that we can access its cb_s_break during call decoding. (6) Write-lock around callback and status storage in a vnode and read-lock around getattr so that we don't see the status mid-update. This has the following consequences: (1) Data invalidation isn't seen until someone calls afs_validate() on a vnode. Unfortunately, we need to use a key to query the server, but getting one from a background thread is tricky without caching loads of keys all over the place. (2) Mass invalidation isn't seen until someone calls afs_validate(). (3) Callback breaking is going to hit the inode_hash_lock quite a bit. Could this be replaced with rcu_read_lock() since inodes are destroyed under RCU conditions. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:49 +03:00
if (valid)
goto valid;
afs: Fix directory page locking The afs directory loading code (primarily afs_read_dir()) locks all the pages that hold a directory's content blob to defend against getdents/getdents races and getdents/lookup races where the competitors issue conflicting reads on the same data. As the reads will complete consecutively, they may retrieve different versions of the data and one may overwrite the data that the other is busy parsing. Fix this by not locking the pages at all, but rather by turning the validation lock into an rwsem and getting an exclusive lock on it whilst reading the data or validating the attributes and a shared lock whilst parsing the data. Sharing the attribute validation lock should be fine as the data fetch will retrieve the attributes also. The individual page locks aren't needed at all as the only place they're being used is to serialise data loading. Without this patch, the: if (!test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags)) { ... } part of afs_read_dir() may be skipped, leaving the pages unlocked when we hit the success: clause - in which case we try to unlock the not-locked pages, leading to the following oops: page:ffffe38b405b4300 count:3 mapcount:0 mapping:ffff98156c83a978 index:0x0 flags: 0xfffe000001004(referenced|private) raw: 000fffe000001004 ffff98156c83a978 0000000000000000 00000003ffffffff raw: dead000000000100 dead000000000200 0000000000000001 ffff98156b27c000 page dumped because: VM_BUG_ON_PAGE(!PageLocked(page)) page->mem_cgroup:ffff98156b27c000 ------------[ cut here ]------------ kernel BUG at mm/filemap.c:1205! ... RIP: 0010:unlock_page+0x43/0x50 ... Call Trace: afs_dir_iterate+0x789/0x8f0 [kafs] ? _cond_resched+0x15/0x30 ? kmem_cache_alloc_trace+0x166/0x1d0 ? afs_do_lookup+0x69/0x490 [kafs] ? afs_do_lookup+0x101/0x490 [kafs] ? key_default_cmp+0x20/0x20 ? request_key+0x3c/0x80 ? afs_lookup+0xf1/0x340 [kafs] ? __lookup_slow+0x97/0x150 ? lookup_slow+0x35/0x50 ? walk_component+0x1bf/0x490 ? path_lookupat.isra.52+0x75/0x200 ? filename_lookup.part.66+0xa0/0x170 ? afs_end_vnode_operation+0x41/0x60 [kafs] ? __check_object_size+0x9c/0x171 ? strncpy_from_user+0x4a/0x170 ? vfs_statx+0x73/0xe0 ? __do_sys_newlstat+0x39/0x70 ? __x64_sys_getdents+0xc9/0x140 ? __x64_sys_getdents+0x140/0x140 ? do_syscall_64+0x5b/0x160 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: f3ddee8dc4e2 ("afs: Fix directory handling") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-27 22:46:22 +03:00
down_write(&vnode->validate_lock);
/* if the promise has expired, we need to check the server again to get
* a new promise - note that if the (parent) directory's metadata was
* changed then the security may be different and we may no longer have
* access */
afs: Overhaul the callback handling Overhaul the AFS callback handling by the following means: (1) Don't give up callback promises on vnodes that we are no longer using, rather let them just expire on the server or let the server break them. This is actually more efficient for the server as the callback lookup is expensive if there are lots of extant callbacks. (2) Only give up the callback promises we have from a server when the server record is destroyed. Then we can just give up *all* the callback promises on it in one go. (3) Servers can end up being shared between cells if cells are aliased, so don't add all the vnodes being backed by a particular server into a big FID-indexed tree on that server as there may be duplicates. Instead have each volume instance (~= superblock) register an interest in a server as it starts to make use of it and use this to allow the processor for callbacks from the server to find the superblock and thence the inode corresponding to the FID being broken by means of ilookup_nowait(). (4) Rather than iterating over the entire callback list when a mass-break comes in from the server, maintain a counter of mass-breaks in afs_server (cb_seq) and make afs_validate() check it against the copy in afs_vnode. It would be nice not to have to take a read_lock whilst doing this, but that's tricky without using RCU. (5) Save a ref on the fileserver we're using for a call in the afs_call struct so that we can access its cb_s_break during call decoding. (6) Write-lock around callback and status storage in a vnode and read-lock around getattr so that we don't see the status mid-update. This has the following consequences: (1) Data invalidation isn't seen until someone calls afs_validate() on a vnode. Unfortunately, we need to use a key to query the server, but getting one from a background thread is tricky without caching loads of keys all over the place. (2) Mass invalidation isn't seen until someone calls afs_validate(). (3) Callback breaking is going to hit the inode_hash_lock quite a bit. Could this be replaced with rcu_read_lock() since inodes are destroyed under RCU conditions. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:49 +03:00
if (!test_bit(AFS_VNODE_CB_PROMISED, &vnode->flags)) {
_debug("not promised");
afs: Fix application of status and callback to be under same lock When applying the status and callback in the response of an operation, apply them in the same critical section so that there's no race between checking the callback state and checking status-dependent state (such as the data version). Fix this by: (1) Allocating a joint {status,callback} record (afs_status_cb) before calling the RPC function for each vnode for which the RPC reply contains a status or a status plus a callback. A flag is set in the record to indicate if a callback was actually received. (2) These records are passed into the RPC functions to be filled in. The afs_decode_status() and yfs_decode_status() functions are removed and the cb_lock is no longer taken. (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer update the vnode. (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update the vnode. (5) vnodes, expected data-version numbers and callback break counters (cb_break) no longer need to be passed to the reply delivery functions. Note that, for the moment, the file locking functions still need access to both the call and the vnode at the same time. (6) afs_vnode_commit_status() is now given the cb_break value and the expected data_version and the task of applying the status and the callback to the vnode are now done here. This is done under a single taking of vnode->cb_lock. (7) afs_pages_written_back() is now called by afs_store_data() rather than by the reply delivery function. afs_pages_written_back() has been moved to before the call point and is now given the first and last page numbers rather than a pointer to the call. (8) The indicator from YFS.RemoveFile2 as to whether the target file actually got removed (status.abort_code == VNOVNODE) rather than merely dropping a link is now checked in afs_unlink rather than in xdr_decode_YFSFetchStatus(). Supplementary fixes: (*) afs_cache_permit() now gets the caller_access mask from the afs_status_cb object rather than picking it out of the vnode's status record. afs_fetch_status() returns caller_access through its argument list for this purpose also. (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather than a read lock and now sets the callback inside the same critical section. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-09 17:16:10 +03:00
ret = afs_fetch_status(vnode, key, false, NULL);
afs: Overhaul the callback handling Overhaul the AFS callback handling by the following means: (1) Don't give up callback promises on vnodes that we are no longer using, rather let them just expire on the server or let the server break them. This is actually more efficient for the server as the callback lookup is expensive if there are lots of extant callbacks. (2) Only give up the callback promises we have from a server when the server record is destroyed. Then we can just give up *all* the callback promises on it in one go. (3) Servers can end up being shared between cells if cells are aliased, so don't add all the vnodes being backed by a particular server into a big FID-indexed tree on that server as there may be duplicates. Instead have each volume instance (~= superblock) register an interest in a server as it starts to make use of it and use this to allow the processor for callbacks from the server to find the superblock and thence the inode corresponding to the FID being broken by means of ilookup_nowait(). (4) Rather than iterating over the entire callback list when a mass-break comes in from the server, maintain a counter of mass-breaks in afs_server (cb_seq) and make afs_validate() check it against the copy in afs_vnode. It would be nice not to have to take a read_lock whilst doing this, but that's tricky without using RCU. (5) Save a ref on the fileserver we're using for a call in the afs_call struct so that we can access its cb_s_break during call decoding. (6) Write-lock around callback and status storage in a vnode and read-lock around getattr so that we don't see the status mid-update. This has the following consequences: (1) Data invalidation isn't seen until someone calls afs_validate() on a vnode. Unfortunately, we need to use a key to query the server, but getting one from a background thread is tricky without caching loads of keys all over the place. (2) Mass invalidation isn't seen until someone calls afs_validate(). (3) Callback breaking is going to hit the inode_hash_lock quite a bit. Could this be replaced with rcu_read_lock() since inodes are destroyed under RCU conditions. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:49 +03:00
if (ret < 0) {
if (ret == -ENOENT) {
set_bit(AFS_VNODE_DELETED, &vnode->flags);
ret = -ESTALE;
}
goto error_unlock;
afs: Overhaul the callback handling Overhaul the AFS callback handling by the following means: (1) Don't give up callback promises on vnodes that we are no longer using, rather let them just expire on the server or let the server break them. This is actually more efficient for the server as the callback lookup is expensive if there are lots of extant callbacks. (2) Only give up the callback promises we have from a server when the server record is destroyed. Then we can just give up *all* the callback promises on it in one go. (3) Servers can end up being shared between cells if cells are aliased, so don't add all the vnodes being backed by a particular server into a big FID-indexed tree on that server as there may be duplicates. Instead have each volume instance (~= superblock) register an interest in a server as it starts to make use of it and use this to allow the processor for callbacks from the server to find the superblock and thence the inode corresponding to the FID being broken by means of ilookup_nowait(). (4) Rather than iterating over the entire callback list when a mass-break comes in from the server, maintain a counter of mass-breaks in afs_server (cb_seq) and make afs_validate() check it against the copy in afs_vnode. It would be nice not to have to take a read_lock whilst doing this, but that's tricky without using RCU. (5) Save a ref on the fileserver we're using for a call in the afs_call struct so that we can access its cb_s_break during call decoding. (6) Write-lock around callback and status storage in a vnode and read-lock around getattr so that we don't see the status mid-update. This has the following consequences: (1) Data invalidation isn't seen until someone calls afs_validate() on a vnode. Unfortunately, we need to use a key to query the server, but getting one from a background thread is tricky without caching loads of keys all over the place. (2) Mass invalidation isn't seen until someone calls afs_validate(). (3) Callback breaking is going to hit the inode_hash_lock quite a bit. Could this be replaced with rcu_read_lock() since inodes are destroyed under RCU conditions. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:49 +03:00
}
_debug("new promise [fl=%lx]", vnode->flags);
}
if (test_bit(AFS_VNODE_DELETED, &vnode->flags)) {
_debug("file already deleted");
ret = -ESTALE;
goto error_unlock;
}
/* if the vnode's data version number changed then its contents are
* different */
if (test_and_clear_bit(AFS_VNODE_ZAP_DATA, &vnode->flags))
afs_zap_data(vnode);
afs: Fix directory page locking The afs directory loading code (primarily afs_read_dir()) locks all the pages that hold a directory's content blob to defend against getdents/getdents races and getdents/lookup races where the competitors issue conflicting reads on the same data. As the reads will complete consecutively, they may retrieve different versions of the data and one may overwrite the data that the other is busy parsing. Fix this by not locking the pages at all, but rather by turning the validation lock into an rwsem and getting an exclusive lock on it whilst reading the data or validating the attributes and a shared lock whilst parsing the data. Sharing the attribute validation lock should be fine as the data fetch will retrieve the attributes also. The individual page locks aren't needed at all as the only place they're being used is to serialise data loading. Without this patch, the: if (!test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags)) { ... } part of afs_read_dir() may be skipped, leaving the pages unlocked when we hit the success: clause - in which case we try to unlock the not-locked pages, leading to the following oops: page:ffffe38b405b4300 count:3 mapcount:0 mapping:ffff98156c83a978 index:0x0 flags: 0xfffe000001004(referenced|private) raw: 000fffe000001004 ffff98156c83a978 0000000000000000 00000003ffffffff raw: dead000000000100 dead000000000200 0000000000000001 ffff98156b27c000 page dumped because: VM_BUG_ON_PAGE(!PageLocked(page)) page->mem_cgroup:ffff98156b27c000 ------------[ cut here ]------------ kernel BUG at mm/filemap.c:1205! ... RIP: 0010:unlock_page+0x43/0x50 ... Call Trace: afs_dir_iterate+0x789/0x8f0 [kafs] ? _cond_resched+0x15/0x30 ? kmem_cache_alloc_trace+0x166/0x1d0 ? afs_do_lookup+0x69/0x490 [kafs] ? afs_do_lookup+0x101/0x490 [kafs] ? key_default_cmp+0x20/0x20 ? request_key+0x3c/0x80 ? afs_lookup+0xf1/0x340 [kafs] ? __lookup_slow+0x97/0x150 ? lookup_slow+0x35/0x50 ? walk_component+0x1bf/0x490 ? path_lookupat.isra.52+0x75/0x200 ? filename_lookup.part.66+0xa0/0x170 ? afs_end_vnode_operation+0x41/0x60 [kafs] ? __check_object_size+0x9c/0x171 ? strncpy_from_user+0x4a/0x170 ? vfs_statx+0x73/0xe0 ? __do_sys_newlstat+0x39/0x70 ? __x64_sys_getdents+0xc9/0x140 ? __x64_sys_getdents+0x140/0x140 ? do_syscall_64+0x5b/0x160 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: f3ddee8dc4e2 ("afs: Fix directory handling") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-27 22:46:22 +03:00
up_write(&vnode->validate_lock);
valid:
_leave(" = 0");
return 0;
error_unlock:
afs: Fix directory page locking The afs directory loading code (primarily afs_read_dir()) locks all the pages that hold a directory's content blob to defend against getdents/getdents races and getdents/lookup races where the competitors issue conflicting reads on the same data. As the reads will complete consecutively, they may retrieve different versions of the data and one may overwrite the data that the other is busy parsing. Fix this by not locking the pages at all, but rather by turning the validation lock into an rwsem and getting an exclusive lock on it whilst reading the data or validating the attributes and a shared lock whilst parsing the data. Sharing the attribute validation lock should be fine as the data fetch will retrieve the attributes also. The individual page locks aren't needed at all as the only place they're being used is to serialise data loading. Without this patch, the: if (!test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags)) { ... } part of afs_read_dir() may be skipped, leaving the pages unlocked when we hit the success: clause - in which case we try to unlock the not-locked pages, leading to the following oops: page:ffffe38b405b4300 count:3 mapcount:0 mapping:ffff98156c83a978 index:0x0 flags: 0xfffe000001004(referenced|private) raw: 000fffe000001004 ffff98156c83a978 0000000000000000 00000003ffffffff raw: dead000000000100 dead000000000200 0000000000000001 ffff98156b27c000 page dumped because: VM_BUG_ON_PAGE(!PageLocked(page)) page->mem_cgroup:ffff98156b27c000 ------------[ cut here ]------------ kernel BUG at mm/filemap.c:1205! ... RIP: 0010:unlock_page+0x43/0x50 ... Call Trace: afs_dir_iterate+0x789/0x8f0 [kafs] ? _cond_resched+0x15/0x30 ? kmem_cache_alloc_trace+0x166/0x1d0 ? afs_do_lookup+0x69/0x490 [kafs] ? afs_do_lookup+0x101/0x490 [kafs] ? key_default_cmp+0x20/0x20 ? request_key+0x3c/0x80 ? afs_lookup+0xf1/0x340 [kafs] ? __lookup_slow+0x97/0x150 ? lookup_slow+0x35/0x50 ? walk_component+0x1bf/0x490 ? path_lookupat.isra.52+0x75/0x200 ? filename_lookup.part.66+0xa0/0x170 ? afs_end_vnode_operation+0x41/0x60 [kafs] ? __check_object_size+0x9c/0x171 ? strncpy_from_user+0x4a/0x170 ? vfs_statx+0x73/0xe0 ? __do_sys_newlstat+0x39/0x70 ? __x64_sys_getdents+0xc9/0x140 ? __x64_sys_getdents+0x140/0x140 ? do_syscall_64+0x5b/0x160 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: f3ddee8dc4e2 ("afs: Fix directory handling") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-27 22:46:22 +03:00
up_write(&vnode->validate_lock);
_leave(" = %d", ret);
return ret;
}
/*
* read the attributes of an inode
*/
statx: Add a system call to make enhanced file info available Add a system call to make extended file information available, including file creation and some attribute flags where available through the underlying filesystem. The getattr inode operation is altered to take two additional arguments: a u32 request_mask and an unsigned int flags that indicate the synchronisation mode. This change is propagated to the vfs_getattr*() function. Functions like vfs_stat() are now inline wrappers around new functions vfs_statx() and vfs_statx_fd() to reduce stack usage. ======== OVERVIEW ======== The idea was initially proposed as a set of xattrs that could be retrieved with getxattr(), but the general preference proved to be for a new syscall with an extended stat structure. A number of requests were gathered for features to be included. The following have been included: (1) Make the fields a consistent size on all arches and make them large. (2) Spare space, request flags and information flags are provided for future expansion. (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an __s64). (4) Creation time: The SMB protocol carries the creation time, which could be exported by Samba, which will in turn help CIFS make use of FS-Cache as that can be used for coherency data (stx_btime). This is also specified in NFSv4 as a recommended attribute and could be exported by NFSD [Steve French]. (5) Lightweight stat: Ask for just those details of interest, and allow a netfs (such as NFS) to approximate anything not of interest, possibly without going to the server [Trond Myklebust, Ulrich Drepper, Andreas Dilger] (AT_STATX_DONT_SYNC). (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks its cached attributes are up to date [Trond Myklebust] (AT_STATX_FORCE_SYNC). And the following have been left out for future extension: (7) Data version number: Could be used by userspace NFS servers [Aneesh Kumar]. Can also be used to modify fill_post_wcc() in NFSD which retrieves i_version directly, but has just called vfs_getattr(). It could get it from the kstat struct if it used vfs_xgetattr() instead. (There's disagreement on the exact semantics of a single field, since not all filesystems do this the same way). (8) BSD stat compatibility: Including more fields from the BSD stat such as creation time (st_btime) and inode generation number (st_gen) [Jeremy Allison, Bernd Schubert]. (9) Inode generation number: Useful for FUSE and userspace NFS servers [Bernd Schubert]. (This was asked for but later deemed unnecessary with the open-by-handle capability available and caused disagreement as to whether it's a security hole or not). (10) Extra coherency data may be useful in making backups [Andreas Dilger]. (No particular data were offered, but things like last backup timestamp, the data version number and the DOS archive bit would come into this category). (11) Allow the filesystem to indicate what it can/cannot provide: A filesystem can now say it doesn't support a standard stat feature if that isn't available, so if, for instance, inode numbers or UIDs don't exist or are fabricated locally... (This requires a separate system call - I have an fsinfo() call idea for this). (12) Store a 16-byte volume ID in the superblock that can be returned in struct xstat [Steve French]. (Deferred to fsinfo). (13) Include granularity fields in the time data to indicate the granularity of each of the times (NFSv4 time_delta) [Steve French]. (Deferred to fsinfo). (14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags. Note that the Linux IOC flags are a mess and filesystems such as Ext4 define flags that aren't in linux/fs.h, so translation in the kernel may be a necessity (or, possibly, we provide the filesystem type too). (Some attributes are made available in stx_attributes, but the general feeling was that the IOC flags were to ext[234]-specific and shouldn't be exposed through statx this way). (15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer, Michael Kerrisk]. (Deferred, probably to fsinfo. Finding out if there's an ACL or seclabal might require extra filesystem operations). (16) Femtosecond-resolution timestamps [Dave Chinner]. (A __reserved field has been left in the statx_timestamp struct for this - if there proves to be a need). (17) A set multiple attributes syscall to go with this. =============== NEW SYSTEM CALL =============== The new system call is: int ret = statx(int dfd, const char *filename, unsigned int flags, unsigned int mask, struct statx *buffer); The dfd, filename and flags parameters indicate the file to query, in a similar way to fstatat(). There is no equivalent of lstat() as that can be emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is also no equivalent of fstat() as that can be emulated by passing a NULL filename to statx() with the fd of interest in dfd. Whether or not statx() synchronises the attributes with the backing store can be controlled by OR'ing a value into the flags argument (this typically only affects network filesystems): (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this respect. (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise its attributes with the server - which might require data writeback to occur to get the timestamps correct. (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a network filesystem. The resulting values should be considered approximate. mask is a bitmask indicating the fields in struct statx that are of interest to the caller. The user should set this to STATX_BASIC_STATS to get the basic set returned by stat(). It should be noted that asking for more information may entail extra I/O operations. buffer points to the destination for the data. This must be 256 bytes in size. ====================== MAIN ATTRIBUTES RECORD ====================== The following structures are defined in which to return the main attribute set: struct statx_timestamp { __s64 tv_sec; __s32 tv_nsec; __s32 __reserved; }; struct statx { __u32 stx_mask; __u32 stx_blksize; __u64 stx_attributes; __u32 stx_nlink; __u32 stx_uid; __u32 stx_gid; __u16 stx_mode; __u16 __spare0[1]; __u64 stx_ino; __u64 stx_size; __u64 stx_blocks; __u64 __spare1[1]; struct statx_timestamp stx_atime; struct statx_timestamp stx_btime; struct statx_timestamp stx_ctime; struct statx_timestamp stx_mtime; __u32 stx_rdev_major; __u32 stx_rdev_minor; __u32 stx_dev_major; __u32 stx_dev_minor; __u64 __spare2[14]; }; The defined bits in request_mask and stx_mask are: STATX_TYPE Want/got stx_mode & S_IFMT STATX_MODE Want/got stx_mode & ~S_IFMT STATX_NLINK Want/got stx_nlink STATX_UID Want/got stx_uid STATX_GID Want/got stx_gid STATX_ATIME Want/got stx_atime{,_ns} STATX_MTIME Want/got stx_mtime{,_ns} STATX_CTIME Want/got stx_ctime{,_ns} STATX_INO Want/got stx_ino STATX_SIZE Want/got stx_size STATX_BLOCKS Want/got stx_blocks STATX_BASIC_STATS [The stuff in the normal stat struct] STATX_BTIME Want/got stx_btime{,_ns} STATX_ALL [All currently available stuff] stx_btime is the file creation time, stx_mask is a bitmask indicating the data provided and __spares*[] are where as-yet undefined fields can be placed. Time fields are structures with separate seconds and nanoseconds fields plus a reserved field in case we want to add even finer resolution. Note that times will be negative if before 1970; in such a case, the nanosecond fields will also be negative if not zero. The bits defined in the stx_attributes field convey information about a file, how it is accessed, where it is and what it does. The following attributes map to FS_*_FL flags and are the same numerical value: STATX_ATTR_COMPRESSED File is compressed by the fs STATX_ATTR_IMMUTABLE File is marked immutable STATX_ATTR_APPEND File is append-only STATX_ATTR_NODUMP File is not to be dumped STATX_ATTR_ENCRYPTED File requires key to decrypt in fs Within the kernel, the supported flags are listed by: KSTAT_ATTR_FS_IOC_FLAGS [Are any other IOC flags of sufficient general interest to be exposed through this interface?] New flags include: STATX_ATTR_AUTOMOUNT Object is an automount trigger These are for the use of GUI tools that might want to mark files specially, depending on what they are. Fields in struct statx come in a number of classes: (0) stx_dev_*, stx_blksize. These are local system information and are always available. (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino, stx_size, stx_blocks. These will be returned whether the caller asks for them or not. The corresponding bits in stx_mask will be set to indicate whether they actually have valid values. If the caller didn't ask for them, then they may be approximated. For example, NFS won't waste any time updating them from the server, unless as a byproduct of updating something requested. If the values don't actually exist for the underlying object (such as UID or GID on a DOS file), then the bit won't be set in the stx_mask, even if the caller asked for the value. In such a case, the returned value will be a fabrication. Note that there are instances where the type might not be valid, for instance Windows reparse points. (2) stx_rdev_*. This will be set only if stx_mode indicates we're looking at a blockdev or a chardev, otherwise will be 0. (3) stx_btime. Similar to (1), except this will be set to 0 if it doesn't exist. ======= TESTING ======= The following test program can be used to test the statx system call: samples/statx/test-statx.c Just compile and run, passing it paths to the files you want to examine. The file is built automatically if CONFIG_SAMPLES is enabled. Here's some example output. Firstly, an NFS directory that crosses to another FSID. Note that the AUTOMOUNT attribute is set because transiting this directory will cause d_automount to be invoked by the VFS. [root@andromeda ~]# /tmp/test-statx -A /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:26 Inode: 1703937 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------) Secondly, the result of automounting on that directory. [root@andromeda ~]# /tmp/test-statx /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:27 Inode: 2 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31 19:46:22 +03:00
int afs_getattr(const struct path *path, struct kstat *stat,
u32 request_mask, unsigned int query_flags)
{
statx: Add a system call to make enhanced file info available Add a system call to make extended file information available, including file creation and some attribute flags where available through the underlying filesystem. The getattr inode operation is altered to take two additional arguments: a u32 request_mask and an unsigned int flags that indicate the synchronisation mode. This change is propagated to the vfs_getattr*() function. Functions like vfs_stat() are now inline wrappers around new functions vfs_statx() and vfs_statx_fd() to reduce stack usage. ======== OVERVIEW ======== The idea was initially proposed as a set of xattrs that could be retrieved with getxattr(), but the general preference proved to be for a new syscall with an extended stat structure. A number of requests were gathered for features to be included. The following have been included: (1) Make the fields a consistent size on all arches and make them large. (2) Spare space, request flags and information flags are provided for future expansion. (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an __s64). (4) Creation time: The SMB protocol carries the creation time, which could be exported by Samba, which will in turn help CIFS make use of FS-Cache as that can be used for coherency data (stx_btime). This is also specified in NFSv4 as a recommended attribute and could be exported by NFSD [Steve French]. (5) Lightweight stat: Ask for just those details of interest, and allow a netfs (such as NFS) to approximate anything not of interest, possibly without going to the server [Trond Myklebust, Ulrich Drepper, Andreas Dilger] (AT_STATX_DONT_SYNC). (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks its cached attributes are up to date [Trond Myklebust] (AT_STATX_FORCE_SYNC). And the following have been left out for future extension: (7) Data version number: Could be used by userspace NFS servers [Aneesh Kumar]. Can also be used to modify fill_post_wcc() in NFSD which retrieves i_version directly, but has just called vfs_getattr(). It could get it from the kstat struct if it used vfs_xgetattr() instead. (There's disagreement on the exact semantics of a single field, since not all filesystems do this the same way). (8) BSD stat compatibility: Including more fields from the BSD stat such as creation time (st_btime) and inode generation number (st_gen) [Jeremy Allison, Bernd Schubert]. (9) Inode generation number: Useful for FUSE and userspace NFS servers [Bernd Schubert]. (This was asked for but later deemed unnecessary with the open-by-handle capability available and caused disagreement as to whether it's a security hole or not). (10) Extra coherency data may be useful in making backups [Andreas Dilger]. (No particular data were offered, but things like last backup timestamp, the data version number and the DOS archive bit would come into this category). (11) Allow the filesystem to indicate what it can/cannot provide: A filesystem can now say it doesn't support a standard stat feature if that isn't available, so if, for instance, inode numbers or UIDs don't exist or are fabricated locally... (This requires a separate system call - I have an fsinfo() call idea for this). (12) Store a 16-byte volume ID in the superblock that can be returned in struct xstat [Steve French]. (Deferred to fsinfo). (13) Include granularity fields in the time data to indicate the granularity of each of the times (NFSv4 time_delta) [Steve French]. (Deferred to fsinfo). (14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags. Note that the Linux IOC flags are a mess and filesystems such as Ext4 define flags that aren't in linux/fs.h, so translation in the kernel may be a necessity (or, possibly, we provide the filesystem type too). (Some attributes are made available in stx_attributes, but the general feeling was that the IOC flags were to ext[234]-specific and shouldn't be exposed through statx this way). (15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer, Michael Kerrisk]. (Deferred, probably to fsinfo. Finding out if there's an ACL or seclabal might require extra filesystem operations). (16) Femtosecond-resolution timestamps [Dave Chinner]. (A __reserved field has been left in the statx_timestamp struct for this - if there proves to be a need). (17) A set multiple attributes syscall to go with this. =============== NEW SYSTEM CALL =============== The new system call is: int ret = statx(int dfd, const char *filename, unsigned int flags, unsigned int mask, struct statx *buffer); The dfd, filename and flags parameters indicate the file to query, in a similar way to fstatat(). There is no equivalent of lstat() as that can be emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is also no equivalent of fstat() as that can be emulated by passing a NULL filename to statx() with the fd of interest in dfd. Whether or not statx() synchronises the attributes with the backing store can be controlled by OR'ing a value into the flags argument (this typically only affects network filesystems): (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this respect. (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise its attributes with the server - which might require data writeback to occur to get the timestamps correct. (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a network filesystem. The resulting values should be considered approximate. mask is a bitmask indicating the fields in struct statx that are of interest to the caller. The user should set this to STATX_BASIC_STATS to get the basic set returned by stat(). It should be noted that asking for more information may entail extra I/O operations. buffer points to the destination for the data. This must be 256 bytes in size. ====================== MAIN ATTRIBUTES RECORD ====================== The following structures are defined in which to return the main attribute set: struct statx_timestamp { __s64 tv_sec; __s32 tv_nsec; __s32 __reserved; }; struct statx { __u32 stx_mask; __u32 stx_blksize; __u64 stx_attributes; __u32 stx_nlink; __u32 stx_uid; __u32 stx_gid; __u16 stx_mode; __u16 __spare0[1]; __u64 stx_ino; __u64 stx_size; __u64 stx_blocks; __u64 __spare1[1]; struct statx_timestamp stx_atime; struct statx_timestamp stx_btime; struct statx_timestamp stx_ctime; struct statx_timestamp stx_mtime; __u32 stx_rdev_major; __u32 stx_rdev_minor; __u32 stx_dev_major; __u32 stx_dev_minor; __u64 __spare2[14]; }; The defined bits in request_mask and stx_mask are: STATX_TYPE Want/got stx_mode & S_IFMT STATX_MODE Want/got stx_mode & ~S_IFMT STATX_NLINK Want/got stx_nlink STATX_UID Want/got stx_uid STATX_GID Want/got stx_gid STATX_ATIME Want/got stx_atime{,_ns} STATX_MTIME Want/got stx_mtime{,_ns} STATX_CTIME Want/got stx_ctime{,_ns} STATX_INO Want/got stx_ino STATX_SIZE Want/got stx_size STATX_BLOCKS Want/got stx_blocks STATX_BASIC_STATS [The stuff in the normal stat struct] STATX_BTIME Want/got stx_btime{,_ns} STATX_ALL [All currently available stuff] stx_btime is the file creation time, stx_mask is a bitmask indicating the data provided and __spares*[] are where as-yet undefined fields can be placed. Time fields are structures with separate seconds and nanoseconds fields plus a reserved field in case we want to add even finer resolution. Note that times will be negative if before 1970; in such a case, the nanosecond fields will also be negative if not zero. The bits defined in the stx_attributes field convey information about a file, how it is accessed, where it is and what it does. The following attributes map to FS_*_FL flags and are the same numerical value: STATX_ATTR_COMPRESSED File is compressed by the fs STATX_ATTR_IMMUTABLE File is marked immutable STATX_ATTR_APPEND File is append-only STATX_ATTR_NODUMP File is not to be dumped STATX_ATTR_ENCRYPTED File requires key to decrypt in fs Within the kernel, the supported flags are listed by: KSTAT_ATTR_FS_IOC_FLAGS [Are any other IOC flags of sufficient general interest to be exposed through this interface?] New flags include: STATX_ATTR_AUTOMOUNT Object is an automount trigger These are for the use of GUI tools that might want to mark files specially, depending on what they are. Fields in struct statx come in a number of classes: (0) stx_dev_*, stx_blksize. These are local system information and are always available. (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino, stx_size, stx_blocks. These will be returned whether the caller asks for them or not. The corresponding bits in stx_mask will be set to indicate whether they actually have valid values. If the caller didn't ask for them, then they may be approximated. For example, NFS won't waste any time updating them from the server, unless as a byproduct of updating something requested. If the values don't actually exist for the underlying object (such as UID or GID on a DOS file), then the bit won't be set in the stx_mask, even if the caller asked for the value. In such a case, the returned value will be a fabrication. Note that there are instances where the type might not be valid, for instance Windows reparse points. (2) stx_rdev_*. This will be set only if stx_mode indicates we're looking at a blockdev or a chardev, otherwise will be 0. (3) stx_btime. Similar to (1), except this will be set to 0 if it doesn't exist. ======= TESTING ======= The following test program can be used to test the statx system call: samples/statx/test-statx.c Just compile and run, passing it paths to the files you want to examine. The file is built automatically if CONFIG_SAMPLES is enabled. Here's some example output. Firstly, an NFS directory that crosses to another FSID. Note that the AUTOMOUNT attribute is set because transiting this directory will cause d_automount to be invoked by the VFS. [root@andromeda ~]# /tmp/test-statx -A /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:26 Inode: 1703937 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------) Secondly, the result of automounting on that directory. [root@andromeda ~]# /tmp/test-statx /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:27 Inode: 2 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31 19:46:22 +03:00
struct inode *inode = d_inode(path->dentry);
afs: Overhaul the callback handling Overhaul the AFS callback handling by the following means: (1) Don't give up callback promises on vnodes that we are no longer using, rather let them just expire on the server or let the server break them. This is actually more efficient for the server as the callback lookup is expensive if there are lots of extant callbacks. (2) Only give up the callback promises we have from a server when the server record is destroyed. Then we can just give up *all* the callback promises on it in one go. (3) Servers can end up being shared between cells if cells are aliased, so don't add all the vnodes being backed by a particular server into a big FID-indexed tree on that server as there may be duplicates. Instead have each volume instance (~= superblock) register an interest in a server as it starts to make use of it and use this to allow the processor for callbacks from the server to find the superblock and thence the inode corresponding to the FID being broken by means of ilookup_nowait(). (4) Rather than iterating over the entire callback list when a mass-break comes in from the server, maintain a counter of mass-breaks in afs_server (cb_seq) and make afs_validate() check it against the copy in afs_vnode. It would be nice not to have to take a read_lock whilst doing this, but that's tricky without using RCU. (5) Save a ref on the fileserver we're using for a call in the afs_call struct so that we can access its cb_s_break during call decoding. (6) Write-lock around callback and status storage in a vnode and read-lock around getattr so that we don't see the status mid-update. This has the following consequences: (1) Data invalidation isn't seen until someone calls afs_validate() on a vnode. Unfortunately, we need to use a key to query the server, but getting one from a background thread is tricky without caching loads of keys all over the place. (2) Mass invalidation isn't seen until someone calls afs_validate(). (3) Callback breaking is going to hit the inode_hash_lock quite a bit. Could this be replaced with rcu_read_lock() since inodes are destroyed under RCU conditions. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:49 +03:00
struct afs_vnode *vnode = AFS_FS_I(inode);
int seq = 0;
_enter("{ ino=%lu v=%u }", inode->i_ino, inode->i_generation);
afs: Overhaul the callback handling Overhaul the AFS callback handling by the following means: (1) Don't give up callback promises on vnodes that we are no longer using, rather let them just expire on the server or let the server break them. This is actually more efficient for the server as the callback lookup is expensive if there are lots of extant callbacks. (2) Only give up the callback promises we have from a server when the server record is destroyed. Then we can just give up *all* the callback promises on it in one go. (3) Servers can end up being shared between cells if cells are aliased, so don't add all the vnodes being backed by a particular server into a big FID-indexed tree on that server as there may be duplicates. Instead have each volume instance (~= superblock) register an interest in a server as it starts to make use of it and use this to allow the processor for callbacks from the server to find the superblock and thence the inode corresponding to the FID being broken by means of ilookup_nowait(). (4) Rather than iterating over the entire callback list when a mass-break comes in from the server, maintain a counter of mass-breaks in afs_server (cb_seq) and make afs_validate() check it against the copy in afs_vnode. It would be nice not to have to take a read_lock whilst doing this, but that's tricky without using RCU. (5) Save a ref on the fileserver we're using for a call in the afs_call struct so that we can access its cb_s_break during call decoding. (6) Write-lock around callback and status storage in a vnode and read-lock around getattr so that we don't see the status mid-update. This has the following consequences: (1) Data invalidation isn't seen until someone calls afs_validate() on a vnode. Unfortunately, we need to use a key to query the server, but getting one from a background thread is tricky without caching loads of keys all over the place. (2) Mass invalidation isn't seen until someone calls afs_validate(). (3) Callback breaking is going to hit the inode_hash_lock quite a bit. Could this be replaced with rcu_read_lock() since inodes are destroyed under RCU conditions. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:49 +03:00
do {
read_seqbegin_or_lock(&vnode->cb_lock, &seq);
generic_fillattr(inode, stat);
afs: Fix silly rename Fix AFS's silly rename by the following means: (1) Set the destination directory in afs_do_silly_rename() so as to avoid misbehaviour and indicate that the directory data version will increment by 1 so as to avoid warnings about unexpected changes in the DV. Also indicate that the ctime should be updated to avoid xfstest grumbling. (2) Note when the server indicates that a directory changed more than we expected (AFS_OPERATION_DIR_CONFLICT), indicating a conflict with a third party change, checking on successful completion of unlink and rename. The problem is that the FS.RemoveFile RPC op doesn't report the status of the unlinked file, though YFS.RemoveFile2 does. This can be mitigated by the assumption that if the directory DV cranked by exactly 1, we can be sure we removed one link from the file; further, ordinarily in AFS, files cannot be hardlinked across directories, so if we reduce nlink to 0, the file is deleted. However, if the directory DV jumps by more than 1, we cannot know if a third party intervened by adding or removing a link on the file we just removed a link from. The same also goes for any vnode that is at the destination of the FS.Rename RPC op. (3) Make afs_vnode_commit_status() apply the nlink drop inside the cb_lock section along with the other attribute updates if ->op_unlinked is set on the descriptor for the appropriate vnode. (4) Issue a follow up status fetch to the unlinked file in the event of a third party conflict that makes it impossible for us to know if we actually deleted the file or not. (5) Provide a flag, AFS_VNODE_SILLY_DELETED, to make afs_getattr() lie to the user about the nlink of a silly deleted file so that it appears as 0, not 1. Found with the generic/035 and generic/084 xfstests. Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
2020-06-15 19:36:58 +03:00
if (test_bit(AFS_VNODE_SILLY_DELETED, &vnode->flags) &&
stat->nlink > 0)
stat->nlink -= 1;
afs: Overhaul the callback handling Overhaul the AFS callback handling by the following means: (1) Don't give up callback promises on vnodes that we are no longer using, rather let them just expire on the server or let the server break them. This is actually more efficient for the server as the callback lookup is expensive if there are lots of extant callbacks. (2) Only give up the callback promises we have from a server when the server record is destroyed. Then we can just give up *all* the callback promises on it in one go. (3) Servers can end up being shared between cells if cells are aliased, so don't add all the vnodes being backed by a particular server into a big FID-indexed tree on that server as there may be duplicates. Instead have each volume instance (~= superblock) register an interest in a server as it starts to make use of it and use this to allow the processor for callbacks from the server to find the superblock and thence the inode corresponding to the FID being broken by means of ilookup_nowait(). (4) Rather than iterating over the entire callback list when a mass-break comes in from the server, maintain a counter of mass-breaks in afs_server (cb_seq) and make afs_validate() check it against the copy in afs_vnode. It would be nice not to have to take a read_lock whilst doing this, but that's tricky without using RCU. (5) Save a ref on the fileserver we're using for a call in the afs_call struct so that we can access its cb_s_break during call decoding. (6) Write-lock around callback and status storage in a vnode and read-lock around getattr so that we don't see the status mid-update. This has the following consequences: (1) Data invalidation isn't seen until someone calls afs_validate() on a vnode. Unfortunately, we need to use a key to query the server, but getting one from a background thread is tricky without caching loads of keys all over the place. (2) Mass invalidation isn't seen until someone calls afs_validate(). (3) Callback breaking is going to hit the inode_hash_lock quite a bit. Could this be replaced with rcu_read_lock() since inodes are destroyed under RCU conditions. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:49 +03:00
} while (need_seqretry(&vnode->cb_lock, seq));
done_seqretry(&vnode->cb_lock, seq);
return 0;
}
/*
* discard an AFS inode
*/
int afs_drop_inode(struct inode *inode)
{
_enter("");
if (test_bit(AFS_VNODE_PSEUDODIR, &AFS_FS_I(inode)->flags))
return generic_delete_inode(inode);
else
return generic_drop_inode(inode);
}
/*
* clear an AFS inode
*/
void afs_evict_inode(struct inode *inode)
{
struct afs_vnode *vnode;
vnode = AFS_FS_I(inode);
_enter("{%llx:%llu.%d}",
vnode->fid.vid,
vnode->fid.vnode,
afs: Overhaul the callback handling Overhaul the AFS callback handling by the following means: (1) Don't give up callback promises on vnodes that we are no longer using, rather let them just expire on the server or let the server break them. This is actually more efficient for the server as the callback lookup is expensive if there are lots of extant callbacks. (2) Only give up the callback promises we have from a server when the server record is destroyed. Then we can just give up *all* the callback promises on it in one go. (3) Servers can end up being shared between cells if cells are aliased, so don't add all the vnodes being backed by a particular server into a big FID-indexed tree on that server as there may be duplicates. Instead have each volume instance (~= superblock) register an interest in a server as it starts to make use of it and use this to allow the processor for callbacks from the server to find the superblock and thence the inode corresponding to the FID being broken by means of ilookup_nowait(). (4) Rather than iterating over the entire callback list when a mass-break comes in from the server, maintain a counter of mass-breaks in afs_server (cb_seq) and make afs_validate() check it against the copy in afs_vnode. It would be nice not to have to take a read_lock whilst doing this, but that's tricky without using RCU. (5) Save a ref on the fileserver we're using for a call in the afs_call struct so that we can access its cb_s_break during call decoding. (6) Write-lock around callback and status storage in a vnode and read-lock around getattr so that we don't see the status mid-update. This has the following consequences: (1) Data invalidation isn't seen until someone calls afs_validate() on a vnode. Unfortunately, we need to use a key to query the server, but getting one from a background thread is tricky without caching loads of keys all over the place. (2) Mass invalidation isn't seen until someone calls afs_validate(). (3) Callback breaking is going to hit the inode_hash_lock quite a bit. Could this be replaced with rcu_read_lock() since inodes are destroyed under RCU conditions. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:49 +03:00
vnode->fid.unique);
_debug("CLEAR INODE %p", inode);
ASSERTCMP(inode->i_ino, ==, vnode->fid.vnode);
mm + fs: store shadow entries in page cache Reclaim will be leaving shadow entries in the page cache radix tree upon evicting the real page. As those pages are found from the LRU, an iput() can lead to the inode being freed concurrently. At this point, reclaim must no longer install shadow pages because the inode freeing code needs to ensure the page tree is really empty. Add an address_space flag, AS_EXITING, that the inode freeing code sets under the tree lock before doing the final truncate. Reclaim will check for this flag before installing shadow pages. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 01:47:49 +04:00
truncate_inode_pages_final(&inode->i_data);
clear_inode(inode);
while (!list_empty(&vnode->wb_keys)) {
struct afs_wb_key *wbk = list_entry(vnode->wb_keys.next,
struct afs_wb_key, vnode_link);
list_del(&wbk->vnode_link);
afs_put_wb_key(wbk);
}
#ifdef CONFIG_AFS_FSCACHE
{
struct afs_vnode_cache_aux aux;
aux.data_version = vnode->status.data_version;
fscache_relinquish_cookie(vnode->cache, &aux,
test_bit(AFS_VNODE_DELETED, &vnode->flags));
vnode->cache = NULL;
}
#endif
afs_prune_wb_keys(vnode);
afs: Fix checker warnings Fix warnings raised by checker, including: (*) Warnings raised by unequal comparison for the purposes of sorting, where the endianness doesn't matter: fs/afs/addr_list.c:246:21: warning: restricted __be16 degrades to integer fs/afs/addr_list.c:246:30: warning: restricted __be16 degrades to integer fs/afs/addr_list.c:248:21: warning: restricted __be32 degrades to integer fs/afs/addr_list.c:248:49: warning: restricted __be32 degrades to integer fs/afs/addr_list.c:283:21: warning: restricted __be16 degrades to integer fs/afs/addr_list.c:283:30: warning: restricted __be16 degrades to integer (*) afs_set_cb_interest() is not actually used and can be removed. (*) afs_cell_gc_delay() should be provided with a sysctl. (*) afs_cell_destroy() needs to use rcu_access_pointer() to read cell->vl_addrs. (*) afs_init_fs_cursor() should be static. (*) struct afs_vnode::permit_cache needs to be marked __rcu. (*) afs_server_rcu() needs to use rcu_access_pointer(). (*) afs_destroy_server() should use rcu_access_pointer() on server->addresses as the server object is no longer accessible. (*) afs_find_server() casts __be16/__be32 values to int in order to directly compare them for the purpose of finding a match in a list, but is should also annotate the cast with __force to avoid checker warnings. (*) afs_check_permit() accesses vnode->permit_cache outside of the RCU readlock, though it doesn't then access the value; the extraneous access is deleted. False positives: (*) Conditional locking around the code in xdr_decode_AFSFetchStatus. This can be dealt with in a separate patch. fs/afs/fsclient.c:148:9: warning: context imbalance in 'xdr_decode_AFSFetchStatus' - different lock contexts for basic block (*) Incorrect handling of seq-retry lock context balance: fs/afs/inode.c:455:38: warning: context imbalance in 'afs_getattr' - different lock contexts for basic block fs/afs/server.c:52:17: warning: context imbalance in 'afs_find_server' - different lock contexts for basic block fs/afs/server.c:128:17: warning: context imbalance in 'afs_find_server_by_uuid' - different lock contexts for basic block Errors: (*) afs_lookup_cell_rcu() needs to break out of the seq-retry loop, not go round again if it successfully found the workstation cell. (*) Fix UUID decode in afs_deliver_cb_probe_uuid(). (*) afs_cache_permit() has a missing rcu_read_unlock() before one of the jumps to the someone_else_changed_it label. Move the unlock to after the label. (*) afs_vl_get_addrs_u() is using ntohl() rather than htonl() when encoding to XDR. (*) afs_deliver_yfsvl_get_endpoints() is using htonl() rather than ntohl() when decoding from XDR. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-09 23:12:31 +03:00
afs_put_permits(rcu_access_pointer(vnode->permit_cache));
key_put(vnode->silly_key);
vnode->silly_key = NULL;
key_put(vnode->lock_key);
vnode->lock_key = NULL;
_leave("");
}
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
static void afs_setattr_success(struct afs_operation *op)
{
struct inode *inode = &op->file[0].vnode->vfs_inode;
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
afs_vnode_commit_status(op, &op->file[0]);
if (op->setattr.attr->ia_valid & ATTR_SIZE) {
loff_t i_size = inode->i_size, size = op->setattr.attr->ia_size;
if (size > i_size)
pagecache_isize_extended(inode, i_size, size);
truncate_pagecache(inode, size);
}
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
}
static const struct afs_operation_ops afs_setattr_operation = {
.issue_afs_rpc = afs_fs_setattr,
.issue_yfs_rpc = yfs_fs_setattr,
.success = afs_setattr_success,
};
/*
* set the attributes of an inode
*/
int afs_setattr(struct dentry *dentry, struct iattr *attr)
{
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
struct afs_operation *op;
struct afs_vnode *vnode = AFS_FS_I(d_inode(dentry));
int ret;
_enter("{%llx:%llu},{n=%pd},%x",
vnode->fid.vid, vnode->fid.vnode, dentry,
attr->ia_valid);
if (!(attr->ia_valid & (ATTR_SIZE | ATTR_MODE | ATTR_UID | ATTR_GID |
ATTR_MTIME | ATTR_MTIME_SET | ATTR_TIMES_SET |
ATTR_TOUCH))) {
_leave(" = 0 [unsupported]");
return 0;
}
if (attr->ia_valid & ATTR_SIZE) {
if (!S_ISREG(vnode->vfs_inode.i_mode))
return -EISDIR;
ret = inode_newsize_ok(&vnode->vfs_inode, attr->ia_size);
if (ret)
return ret;
if (attr->ia_size == i_size_read(&vnode->vfs_inode))
attr->ia_valid &= ~ATTR_SIZE;
}
/* flush any dirty data outstanding on a regular file */
if (S_ISREG(vnode->vfs_inode.i_mode))
filemap_write_and_wait(vnode->vfs_inode.i_mapping);
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
op = afs_alloc_operation(((attr->ia_valid & ATTR_FILE) ?
afs_file_key(attr->ia_file) : NULL),
vnode->volume);
if (IS_ERR(op))
return PTR_ERR(op);
afs: Overhaul volume and server record caching and fileserver rotation The current code assumes that volumes and servers are per-cell and are never shared, but this is not enforced, and, indeed, public cells do exist that are aliases of each other. Further, an organisation can, say, set up a public cell and a private cell with overlapping, but not identical, sets of servers. The difference is purely in the database attached to the VL servers. The current code will malfunction if it sees a server in two cells as it assumes global address -> server record mappings and that each server is in just one cell. Further, each server may have multiple addresses - and may have addresses of different families (IPv4 and IPv6, say). To this end, the following structural changes are made: (1) Server record management is overhauled: (a) Server records are made independent of cell. The namespace keeps track of them, volume records have lists of them and each vnode has a server on which its callback interest currently resides. (b) The cell record no longer keeps a list of servers known to be in that cell. (c) The server records are now kept in a flat list because there's no single address to sort on. (d) Server records are now keyed by their UUID within the namespace. (e) The addresses for a server are obtained with the VL.GetAddrsU rather than with VL.GetEntryByName, using the server's UUID as a parameter. (f) Cached server records are garbage collected after a period of non-use and are counted out of existence before purging is allowed to complete. This protects the work functions against rmmod. (g) The servers list is now in /proc/fs/afs/servers. (2) Volume record management is overhauled: (a) An RCU-replaceable server list is introduced. This tracks both servers and their coresponding callback interests. (b) The superblock is now keyed on cell record and numeric volume ID. (c) The volume record is now tied to the superblock which mounts it, and is activated when mounted and deactivated when unmounted. This makes it easier to handle the cache cookie without causing a double-use in fscache. (d) The volume record is loaded from the VLDB using VL.GetEntryByNameU to get the server UUID list. (e) The volume name is updated if it is seen to have changed when the volume is updated (the update is keyed on the volume ID). (3) The vlocation record is got rid of and VLDB records are no longer cached. Sufficient information is stored in the volume record, though an update to a volume record is now no longer shared between related volumes (volumes come in bundles of three: R/W, R/O and backup). and the following procedural changes are made: (1) The fileserver cursor introduced previously is now fleshed out and used to iterate over fileservers and their addresses. (2) Volume status is checked during iteration, and the server list is replaced if a change is detected. (3) Server status is checked during iteration, and the address list is replaced if a change is detected. (4) The abort code is saved into the address list cursor and -ECONNABORTED returned in afs_make_call() if a remote abort happened rather than translating the abort into an error message. This allows actions to be taken depending on the abort code more easily. (a) If a VMOVED abort is seen then this is handled by rechecking the volume and restarting the iteration. (b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is handled by sleeping for a short period and retrying and/or trying other servers that might serve that volume. A message is also displayed once until the condition has cleared. (c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the moment. (d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to see if it has been deleted; if not, the fileserver is probably indicating that the volume couldn't be attached and needs salvaging. (e) If statfs() sees one of these aborts, it does not sleep, but rather returns an error, so as not to block the umount program. (5) The fileserver iteration functions in vnode.c are now merged into their callers and more heavily macroised around the cursor. vnode.c is removed. (6) Operations on a particular vnode are serialised on that vnode because the server will lock that vnode whilst it operates on it, so a second op sent will just have to wait. (7) Fileservers are probed with FS.GetCapabilities before being used. This is where service upgrade will be done. (8) A callback interest on a fileserver is set up before an FS operation is performed and passed through to afs_make_call() so that it can be set on the vnode if the operation returns a callback. The callback interest is passed through to afs_iget() also so that it can be set there too. In general, record updating is done on an as-needed basis when we try to access servers, volumes or vnodes rather than offloading it to work items and special threads. Notes: (1) Pre AFS-3.4 servers are no longer supported, though this can be added back if necessary (AFS-3.4 was released in 1998). (2) VBUSY is retried forever for the moment at intervals of 1s. (3) /proc/fs/afs/<cell>/servers no longer exists. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:50 +03:00
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
afs_op_set_vnode(op, 0, vnode);
op->setattr.attr = attr;
afs: Overhaul volume and server record caching and fileserver rotation The current code assumes that volumes and servers are per-cell and are never shared, but this is not enforced, and, indeed, public cells do exist that are aliases of each other. Further, an organisation can, say, set up a public cell and a private cell with overlapping, but not identical, sets of servers. The difference is purely in the database attached to the VL servers. The current code will malfunction if it sees a server in two cells as it assumes global address -> server record mappings and that each server is in just one cell. Further, each server may have multiple addresses - and may have addresses of different families (IPv4 and IPv6, say). To this end, the following structural changes are made: (1) Server record management is overhauled: (a) Server records are made independent of cell. The namespace keeps track of them, volume records have lists of them and each vnode has a server on which its callback interest currently resides. (b) The cell record no longer keeps a list of servers known to be in that cell. (c) The server records are now kept in a flat list because there's no single address to sort on. (d) Server records are now keyed by their UUID within the namespace. (e) The addresses for a server are obtained with the VL.GetAddrsU rather than with VL.GetEntryByName, using the server's UUID as a parameter. (f) Cached server records are garbage collected after a period of non-use and are counted out of existence before purging is allowed to complete. This protects the work functions against rmmod. (g) The servers list is now in /proc/fs/afs/servers. (2) Volume record management is overhauled: (a) An RCU-replaceable server list is introduced. This tracks both servers and their coresponding callback interests. (b) The superblock is now keyed on cell record and numeric volume ID. (c) The volume record is now tied to the superblock which mounts it, and is activated when mounted and deactivated when unmounted. This makes it easier to handle the cache cookie without causing a double-use in fscache. (d) The volume record is loaded from the VLDB using VL.GetEntryByNameU to get the server UUID list. (e) The volume name is updated if it is seen to have changed when the volume is updated (the update is keyed on the volume ID). (3) The vlocation record is got rid of and VLDB records are no longer cached. Sufficient information is stored in the volume record, though an update to a volume record is now no longer shared between related volumes (volumes come in bundles of three: R/W, R/O and backup). and the following procedural changes are made: (1) The fileserver cursor introduced previously is now fleshed out and used to iterate over fileservers and their addresses. (2) Volume status is checked during iteration, and the server list is replaced if a change is detected. (3) Server status is checked during iteration, and the address list is replaced if a change is detected. (4) The abort code is saved into the address list cursor and -ECONNABORTED returned in afs_make_call() if a remote abort happened rather than translating the abort into an error message. This allows actions to be taken depending on the abort code more easily. (a) If a VMOVED abort is seen then this is handled by rechecking the volume and restarting the iteration. (b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is handled by sleeping for a short period and retrying and/or trying other servers that might serve that volume. A message is also displayed once until the condition has cleared. (c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the moment. (d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to see if it has been deleted; if not, the fileserver is probably indicating that the volume couldn't be attached and needs salvaging. (e) If statfs() sees one of these aborts, it does not sleep, but rather returns an error, so as not to block the umount program. (5) The fileserver iteration functions in vnode.c are now merged into their callers and more heavily macroised around the cursor. vnode.c is removed. (6) Operations on a particular vnode are serialised on that vnode because the server will lock that vnode whilst it operates on it, so a second op sent will just have to wait. (7) Fileservers are probed with FS.GetCapabilities before being used. This is where service upgrade will be done. (8) A callback interest on a fileserver is set up before an FS operation is performed and passed through to afs_make_call() so that it can be set on the vnode if the operation returns a callback. The callback interest is passed through to afs_iget() also so that it can be set there too. In general, record updating is done on an as-needed basis when we try to access servers, volumes or vnodes rather than offloading it to work items and special threads. Notes: (1) Pre AFS-3.4 servers are no longer supported, though this can be added back if necessary (AFS-3.4 was released in 1998). (2) VBUSY is retried forever for the moment at intervals of 1s. (3) /proc/fs/afs/<cell>/servers no longer exists. Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-02 18:27:50 +03:00
if (attr->ia_valid & ATTR_SIZE) {
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
op->file[0].dv_delta = 1;
op->file[0].set_size = true;
}
op->ctime = attr->ia_ctime;
op->file[0].update_ctime = 1;
afs: Build an abstraction around an "operation" concept Turn the afs_operation struct into the main way that most fileserver operations are managed. Various things are added to the struct, including the following: (1) All the parameters and results of the relevant operations are moved into it, removing corresponding fields from the afs_call struct. afs_call gets a pointer to the op. (2) The target volume is made the main focus of the operation, rather than the target vnode(s), and a bunch of op->vnode->volume are made op->volume instead. (3) Two vnode records are defined (op->file[]) for the vnode(s) involved in most operations. The vnode record (struct afs_vnode_param) contains: - The vnode pointer. - The fid of the vnode to be included in the parameters or that was returned in the reply (eg. FS.MakeDir). - The status and callback information that may be returned in the reply about the vnode. - Callback break and data version tracking for detecting simultaneous third-parth changes. (4) Pointers to dentries to be updated with new inodes. (5) An operations table pointer. The table includes pointers to functions for issuing AFS and YFS-variant RPCs, handling the success and abort of an operation and handling post-I/O-lock local editing of a directory. To make this work, the following function restructuring is made: (A) The rotation loop that issues calls to fileservers that can be found in each function that wants to issue an RPC (such as afs_mkdir()) is extracted out into common code, in a new file called fs_operation.c. (B) The rotation loops, such as the one in afs_mkdir(), are replaced with a much smaller piece of code that allocates an operation, sets the parameters and then calls out to the common code to do the actual work. (C) The code for handling the success and failure of an operation are moved into operation functions (as (5) above) and these are called from the core code at appropriate times. (D) The pseudo inode getting stuff used by the dynamic root code is moved over into dynroot.c. (E) struct afs_iget_data is absorbed into the operation struct and afs_iget() expects to be given an op pointer and a vnode record. (F) Point (E) doesn't work for the root dir of a volume, but we know the FID in advance (it's always vnode 1, unique 1), so a separate inode getter, afs_root_iget(), is provided to special-case that. (G) The inode status init/update functions now also take an op and a vnode record. (H) The RPC marshalling functions now, for the most part, just take an afs_operation struct as their only argument. All the data they need is held there. The result delivery functions write their answers there as well. (I) The call is attached to the operation and then the operation core does the waiting. And then the new operation code is, for the moment, made to just initialise the operation, get the appropriate vnode I/O locks and do the same rotation loop as before. This lays the foundation for the following changes in the future: (*) Overhauling the rotation (again). (*) Support for asynchronous I/O, where the fileserver rotation must be done asynchronously also. Signed-off-by: David Howells <dhowells@redhat.com>
2020-04-10 22:51:51 +03:00
op->ops = &afs_setattr_operation;
return afs_do_sync_operation(op);
}