iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/configs/exynos_defconfig

214 lines
4.6 KiB
Plaintext
Raw Normal View History

ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_SYSVIPC=y
ARM: exynos_defconfig: Enable CONFIG_FHANDLE CONFIG_FHANDLE is required by systemd, which is the default init system in more and more distributions. So lets enable it for Exynos as well (it's already enabled in multi_v7_defconfig) Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 13:50:01 +09:00
CONFIG_FHANDLE=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
ARM: exynos_defconfig: Enable Control Groups support systemd needs control groups support to be enabled in the kernel so let's enable it by default since is quite likely that a user-space with systemd will be used. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-24 02:42:52 +09:00
CONFIG_CGROUPS=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_EXYNOS=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_ARCH_EXYNOS3=y
CONFIG_EXYNOS5420_MCPM=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_SMP=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_BIG_LITTLE=y
CONFIG_BL_SWITCHER=y
CONFIG_BL_SWITCHER_DUMMY_IF=y
ARM: exynos_defconfig: increase CONFIG_NR_CPUS value to 8 Current CONFIG_NR_CPUS value (2) is too small for: - EXYNOS4412 (4 cores) - EXYNOS5440 (4 cores) - EXYNOS5410 (8 cores) - EXYNOS5420 (8 cores) Set CONFIG_NR_CPUS to 8 so it is correct for all currently supported SoCs. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-02 07:33:38 +09:00
CONFIG_NR_CPUS=8
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_PREEMPT=y
CONFIG_AEABI=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_HIGHMEM=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_CMA=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_CPU_FREQ=y
ARM: exynos_defconfig: Enable CPU idle Current Exynos CPU idle driver supports entering AFTR (Arm Off, Top Running) mode on Exynos 4210 (coupled), Exynos 4x12 and Exynos 5250. Enable it in default configuration to reduce energy consumption. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-03-18 00:43:43 +09:00
CONFIG_CPU_IDLE=y
CONFIG_ARM_EXYNOS_CPUIDLE=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
ARM: exynos_defconfig: Enable options to mount a rootfs via NFS This patch enables the options to mount a rootfs over NFS and also support for automatic configuration of IP addresses during boot as needed by NFS. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-03-27 01:50:16 +09:00
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
ARM: exynos_defconfig: Enable Marvell WiFi-Ex support Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have a MMC/SDIO Marvell WiFi-Ex chip. This patch enables wireless support and the mwifiex driver. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-03-18 00:42:17 +09:00
CONFIG_CFG80211=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_RFKILL_REGULATOR=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=64
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_BLK_DEV_LOOP=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_BLK_DEV_CRYPTOLOOP=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_MD=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=m
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_NETDEVICES=y
CONFIG_SMSC911X=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_MWIFIEX=y
CONFIG_MWIFIEX_SDIO=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_INPUT_EVDEV=y
ARM: exynos_defconfig: Enable GPIO buttons and RTC drivers Many of the boards use GPIO-mapped buttons for generic input. For Arndale board, these buttons also serve as wakeup source. And the issues reported in commit 522ccdb6fd0e ("ARM: dts: Disable the RTC by default on exynos5") are no longer reproduced on EXYNOS5250 based systems. Hence it would be better to re-enable RTC support for EXYNOS5250. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> [mturquette@linaro.org: ack on RTC enabling] Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19 00:35:01 +09:00
CONFIG_KEYBOARD_GPIO=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_KEYBOARD_CROS_EC=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_CYAPA=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_INPUT_TOUCHSCREEN=y
ARM: exynos_defconfig: Enable Atmel maXTouch support Many Exynos based Chromebooks have an Atmel trackpad so enable support for it by default will make easier for users. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-24 02:42:49 +09:00
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_HW_RANDOM=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_I2C_INFINEON=y
ARM: exynos_defconfig: Enable MAX77802 Enabled MAX77802 pmic for exynos systems. One config USB_ANNOUNCE_NEW_DEVICES to display device information on connect. Another config for I2C_CHARDEV to see i2c device nodes. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-24 02:42:40 +09:00
CONFIG_I2C_CHARDEV=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers The Exynos System-on-Chips have ~7 distinctive I2C IO ports (exact number depends on chip). However some integrated circuits on board, also using I2C protocol for communication, can be connected to the SoC by other GPIO. Enabling the I2C GPIO driver allows using such additional integrated circuits. An example of such chip using I2C and connected over GPIO to SoC is Maxim 77693 MUIC on Trats2 board. The regulator driver of Maxim 77693 offers charger and safeout LDO (necessary for USB OTG). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-24 03:19:29 +09:00
CONFIG_I2C_GPIO=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SPI=y
CONFIG_SPI_S3C64XX=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_DEBUG_GPIO=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_POWER_SUPPLY=y
ARM: exynos_defconfig: Enable SBS battery support Many Exynos5 boards (e.g: Snow, Peach Pit and Pi) have a SBS-compliant gas gauge battery. Enable to built it so the needed support is available for these boards. Suggested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-08-18 11:25:51 -05:00
CONFIG_BATTERY_SBS=y
ARM: exynos_defconfig: Enable PMIC and MUIC drivers for Gears and Trats2 Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, extcon, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, extcon, fuel gauge (max17042), used on: Trats2, This allows full usage of charging stack on these devices along with extcon connector. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 13:49:55 +09:00
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_CHARGER_MAX14577=y
CONFIG_CHARGER_MAX77693=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_CHARGER_TPS65090=y
ARM: exynos_defconfig: Enable LM90 driver multi_v7_defconfig has it as Y already, so build it in here, too, for consistency, and therefore build in HWMON as well. Signed-off-by: Andreas Faerber <afaerber@suse.de> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2014-11-22 23:31:30 +09:00
CONFIG_SENSORS_LM90=y
ARM: exynos_defconfig: Enable CONFIG_SENSORS_PWM_FAN for Odroid-XU3 Enable CONFIG_SENSORS_PWM_FAN on exynos_defconfig to control fan power on Odroid-XU3. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-13 14:32:05 +09:30
CONFIG_SENSORS_PWM_FAN=y
ARM: exynos_defconfig: Enable CONFIG_SENSORS_INA2XX for Odroid-XU3 Odroid-XU3 board support power monitor sensor. Below is the output of boot log. [ 3.241438] ina2xx 0-0040: power monitor ina231 (Rshunt = 10000 uOhm) [ 3.248068] ina2xx 0-0041: power monitor ina231 (Rshunt = 10000 uOhm) [ 3.254724] ina2xx 0-0044: power monitor ina231 (Rshunt = 10000 uOhm) [ 3.261354] ina2xx 0-0045: power monitor ina231 (Rshunt = 10000 uOhm) ina231-i2c-0-40 Adapter: s3c2410-i2c in0: +0.00 V in1: +1.01 V power1: 175.00 mW curr1: +0.18 A ina231-i2c-0-41 Adapter: s3c2410-i2c in0: +0.00 V in1: +1.21 V power1: 50.00 mW curr1: +0.04 A ina231-i2c-0-44 Adapter: s3c2410-i2c in0: +0.00 V in1: +1.02 V power1: 50.00 mW curr1: +0.04 A ina231-i2c-0-45 Adapter: s3c2410-i2c in0: +0.00 V in1: +1.04 V power1: 75.00 mW curr1: +0.07 A Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-13 14:32:06 +09:30
CONFIG_SENSORS_INA2XX=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_THERMAL=y
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_CPU_THERMAL=y
ARM: exynos_defconfig: Enable thermal emulation for Exynos TMU Enabling thermal emulation on Exynos SoCs. New sysfs attribute - emul_temp is created. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-04 23:54:01 +09:00
CONFIG_THERMAL_EMULATION=y
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_EXYNOS_THERMAL=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_MFD_CROS_EC_SPI=y
ARM: exynos_defconfig: Enable PMIC and MUIC drivers for Gears and Trats2 Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, extcon, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, extcon, fuel gauge (max17042), used on: Trats2, This allows full usage of charging stack on these devices along with extcon connector. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 13:49:55 +09:00
CONFIG_MFD_MAX14577=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_MFD_MAX77686=y
ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers The Exynos System-on-Chips have ~7 distinctive I2C IO ports (exact number depends on chip). However some integrated circuits on board, also using I2C protocol for communication, can be connected to the SoC by other GPIO. Enabling the I2C GPIO driver allows using such additional integrated circuits. An example of such chip using I2C and connected over GPIO to SoC is Maxim 77693 MUIC on Trats2 board. The regulator driver of Maxim 77693 offers charger and safeout LDO (necessary for USB OTG). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-24 03:19:29 +09:00
CONFIG_MFD_MAX77693=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_MFD_MAX8997=y
CONFIG_MFD_SEC_CORE=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_MFD_TPS65090=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
ARM: exynos_defconfig: Enable PMIC and MUIC drivers for Gears and Trats2 Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, extcon, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, extcon, fuel gauge (max17042), used on: Trats2, This allows full usage of charging stack on these devices along with extcon connector. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 13:49:55 +09:00
CONFIG_REGULATOR_MAX14577=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX77686=y
ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers The Exynos System-on-Chips have ~7 distinctive I2C IO ports (exact number depends on chip). However some integrated circuits on board, also using I2C protocol for communication, can be connected to the SoC by other GPIO. Enabling the I2C GPIO driver allows using such additional integrated circuits. An example of such chip using I2C and connected over GPIO to SoC is Maxim 77693 MUIC on Trats2 board. The regulator driver of Maxim 77693 offers charger and safeout LDO (necessary for USB OTG). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-24 03:19:29 +09:00
CONFIG_REGULATOR_MAX77693=y
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_REGULATOR_MAX77802=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_REGULATOR_S2MPA01=y
Linux 3.13-rc5 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.15 (GNU/Linux) iQEcBAABAgAGBQJSt1TYAAoJEHm+PkMAQRiGvWgH/iWg8TmEWz4KUKuHthuUi0uh 9+2YDN+4k577Xa0obaG24giQeqkCdxMr3oJrS3FO9jeAmaNRHEGhxUPneisb7RtN 9jIVsz5bPa9/DcK9nqtaUQdvA0O5AWTE6AAPmwleTVy+8CygBo987T2uGELnQCSR FrKCrMePc7Pj0uthMVXrpJ17Ffm/j7jkfRtPhrxHJyngh3jEux+tPbpynH/aKuO2 47unsSQimoFk7n2SPFvNu3E/vZE2xVbu5SH9MCl5yyiCifFjpi3B71LV/FW51lvm cK8Jzn2BmYDygRFjnZfq4zJHqYJCBHzpjCLWmR37Dm/JS91aGq3+Cg0stDP8UTs= =+Hcn -----END PGP SIGNATURE----- Merge tag 'v3.13-rc5' into next/boards Need a newer base version to get a regulator fix for Samsung platforms that they enable building in a defconfig. Linux 3.13-rc5
2013-12-28 21:37:03 -08:00
CONFIG_REGULATOR_S2MPS11=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_REGULATOR_S5M8767=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_REGULATOR_TPS65090=y
ARM: exynos_defconfig: Enable options for display panel support Many Exynos devices have a display panel. Most of them just have a simple panel while others have more complex configurations that requires an embedded DisplayPort (eDP) to LVDS bridges. This patch enables the following features to be built in the kernel image to support both setups: - Direct Rendering Manager (DRM) - DRM bridge registration and lookup framework - Parade ps8622/ps8625 eDP/LVDS bridge - NXP ptn3460 eDP/LVDS bridge - Exynos Fully Interactive Mobile Display controller (FIMD) - Panel registration and lookup framework - Simple panels - Backlight & LCD device support Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-09 01:11:10 +09:00
CONFIG_DRM=y
CONFIG_DRM_PTN3460=y
CONFIG_DRM_PS8622=y
CONFIG_DRM_EXYNOS=y
CONFIG_DRM_EXYNOS_FIMD=y
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_DRM_EXYNOS_DSI=y
CONFIG_DRM_EXYNOS_HDMI=y
ARM: exynos_defconfig: Enable options for display panel support Many Exynos devices have a display panel. Most of them just have a simple panel while others have more complex configurations that requires an embedded DisplayPort (eDP) to LVDS bridges. This patch enables the following features to be built in the kernel image to support both setups: - Direct Rendering Manager (DRM) - DRM bridge registration and lookup framework - Parade ps8622/ps8625 eDP/LVDS bridge - NXP ptn3460 eDP/LVDS bridge - Exynos Fully Interactive Mobile Display controller (FIMD) - Panel registration and lookup framework - Simple panels - Backlight & LCD device support Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-09 01:11:10 +09:00
CONFIG_DRM_PANEL_SIMPLE=y
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_DRM_PANEL_S6E8AA0=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_FB_SIMPLE=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_EXYNOS_VIDEO=y
CONFIG_EXYNOS_MIPI_DSI=y
ARM: exynos_defconfig: Enable options for display panel support Many Exynos devices have a display panel. Most of them just have a simple panel while others have more complex configurations that requires an embedded DisplayPort (eDP) to LVDS bridges. This patch enables the following features to be built in the kernel image to support both setups: - Direct Rendering Manager (DRM) - DRM bridge registration and lookup framework - Parade ps8622/ps8625 eDP/LVDS bridge - NXP ptn3460 eDP/LVDS bridge - Exynos Fully Interactive Mobile Display controller (FIMD) - Panel registration and lookup framework - Simple panels - Backlight & LCD device support Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-09 01:11:10 +09:00
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_PWM=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_LOGO=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_SOC_SNOW=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_USB=y
ARM: exynos_defconfig: Enable MAX77802 Enabled MAX77802 pmic for exynos systems. One config USB_ANNOUNCE_NEW_DEVICES to display device information on connect. Another config for I2C_CHARDEV to see i2c device nodes. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-09-24 02:42:40 +09:00
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_USB_XHCI_HCD=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_USB_EHCI_HCD=y
ARM: exynos_defconfig: Update EHCI config entry Commit 29824c167bea ("USB: host: Rename ehci-s5p to ehci-exynos") renamed the config entry of EHCI host driver. Similar change needs to be done in exynos_defconfig as well. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-02-16 02:02:33 +09:00
CONFIG_USB_EHCI_EXYNOS=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_EXYNOS=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_USB_HSIC_USB3503=y
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_USB_GADGET=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_MMC=y
ARM: exynos_defconfig: Use 16 minors per MMC block device 16 minors per MMC block device are required to boot Rinato (Gear 2) board because up to 15 partitions are used. With default 8 minors booting failed with: [ 1.329092] mmcblk0: mmc0:0001 F5X5MA 3.64 GiB [ 1.329448] mmcblk0boot0: mmc0:0001 F5X5MA partition 1 4.00 MiB [ 1.329627] mmcblk0boot1: mmc0:0001 F5X5MA partition 2 4.00 MiB [ 1.329808] mmcblk0rpmb: mmc0:0001 F5X5MA partition 3 512 KiB [ 1.335717] mmcblk0: p1 p2 p3 p4 p5 p6 p7 [ 1.436553] Waiting for root device /dev/mmcblk0p15... while the correct list of partitions on mmcblk0 for Gear 2 is: [ 1.436651] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-19 16:56:19 +09:00
CONFIG_MMC_BLOCK_MINORS=16
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S3C=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_MMC_SDHCI_S3C_DMA=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_MMC_DW=y
CONFIG_MMC_DW_IDMAC=y
CONFIG_MMC_DW_EXYNOS=y
ARM: exynos_defconfig: Enable GPIO buttons and RTC drivers Many of the boards use GPIO-mapped buttons for generic input. For Arndale board, these buttons also serve as wakeup source. And the issues reported in commit 522ccdb6fd0e ("ARM: dts: Disable the RTC by default on exynos5") are no longer reproduced on EXYNOS5250 based systems. Hence it would be better to re-enable RTC support for EXYNOS5250. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> [mturquette@linaro.org: ack on RTC enabling] Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19 00:35:01 +09:00
CONFIG_RTC_CLASS=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_RTC_DRV_MAX77686=y
ARM: exynos_defconfig: Enable max77802 rtc and clock drivers Commit 6e80e3d87549 ("ARM: exynos_defconfig: Enable MAX77802") enabled support for the max77802 regulators but the PMIC also has a Real-Time-Clock (RTC) and 2-channel 32kHz clock outputs. Enable the kernel config options to have the drivers for these devices built-in since they are present in many Exynos boards. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-19 17:07:43 +09:00
CONFIG_RTC_DRV_MAX77802=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_RTC_DRV_S5M=y
ARM: exynos_defconfig: Enable GPIO buttons and RTC drivers Many of the boards use GPIO-mapped buttons for generic input. For Arndale board, these buttons also serve as wakeup source. And the issues reported in commit 522ccdb6fd0e ("ARM: dts: Disable the RTC by default on exynos5") are no longer reproduced on EXYNOS5250 based systems. Hence it would be better to re-enable RTC support for EXYNOS5250. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> [mturquette@linaro.org: ack on RTC enabling] Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19 00:35:01 +09:00
CONFIG_RTC_DRV_S3C=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_DMADEVICES=y
CONFIG_PL330_DMA=y
ARM: exynos_defconfig: Enable ChromeOS EC chardev driver Exynos Chromebooks have an Embedded Controller known as the ChromeOS EC Enable the driver that provides an interface to access from user-space. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-03-18 02:16:42 +09:00
CONFIG_CHROME_PLATFORMS=y
CONFIG_CROS_EC_CHARDEV=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_COMMON_CLK_MAX77686=y
ARM: exynos_defconfig: Enable max77802 rtc and clock drivers Commit 6e80e3d87549 ("ARM: exynos_defconfig: Enable MAX77802") enabled support for the max77802 regulators but the PMIC also has a Real-Time-Clock (RTC) and 2-channel 32kHz clock outputs. Enable the kernel config options to have the drivers for these devices built-in since they are present in many Exynos boards. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-19 17:07:43 +09:00
CONFIG_COMMON_CLK_MAX77802=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_COMMON_CLK_S2MPS11=y
ARM: exynos_defconfig: Enable PMIC and MUIC drivers for Gears and Trats2 Enable drivers for PMICs and MUICs present on Exynos-based devices: - max14577: charger, extcon, fuel gauge (max17040), regulator, used on: Gear 1, Gear 2, - max77693: charger, extcon, fuel gauge (max17042), used on: Trats2, This allows full usage of charging stack on these devices along with extcon connector. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 13:49:55 +09:00
CONFIG_EXTCON=y
CONFIG_EXTCON_MAX14577=y
CONFIG_EXTCON_MAX77693=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
CONFIG_PWM=y
CONFIG_PWM_SAMSUNG=y
CONFIG_PHY_EXYNOS5250_SATA=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_CRAMFS=y
CONFIG_ROMFS_FS=y
ARM: exynos_defconfig: Enable options to mount a rootfs via NFS This patch enables the options to mount a rootfs over NFS and also support for automatic configuration of IP addresses during boot as needed by NFS. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-03-27 01:50:16 +09:00
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_PRINTK_TIME=y
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_DEBUG_INFO=y
ARM: exynos_defconfig: Update exynos_defconfig Removed outdated configs. Enabled most of the configs used on latest Exynos based platforms. This will provide a reference for users trying to verify and test various features on Exynos based platforms and also help in detecting breakages by widening the build coverage. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> [arun.kk@samsung.com: on Snow, Pit, Pi chromebooks] Tested-by: Arun Kumar K <arun.kk@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-16 02:27:55 +09:00
CONFIG_DEBUG_FS=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_LOCKUP_DETECTOR=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_USER=y
ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-09 13:58:19 -07:00
CONFIG_CRYPTO_SHA256=y
ARM: exynos_defconfig: enable more platforms in defconfig This enables the new EXYNOS5 platforms in the defconfig, and enables DT support on EXYNOS4. Other options enabled: USB host, EXT3/4, regulators and tps65090, networking and a few of the common usb ethernet adapters as well as the smsc911x controller used on some boards. I enabled EFI_PARTITION, since it's used on some filesystem images I'm using. I didn't see a need to keep Solaris and BSD partition format still enabled. Finally, framebuffer console, logo and fonts were enabled. Note that enabling some of these options introduces build coverage previously missing, thus introducing a few build errors and warnings for which fixes have been sent out already. Signed-off-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: restored exynos4_defconfig from original] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-17 08:43:44 +09:00
CONFIG_CRC_CCITT=y
ARM: exynos_defconfig: savedefconfig This patch does 'savedefconfig' for exynos_defconfig to remove useless configs and check its dependencies. Sometimes some configs could be ignored because of the dependencies even they are enabled in defconfig file manually. So checking the dependencies would be better. Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-23 12:29:53 +09:00
CONFIG_FONTS=y
CONFIG_FONT_7x14=y
Reference in New Issue Copy Permalink