iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

mtd: rawnand: brcmnand: Add platform data structure for BCMA

Browse Source 
Update the BCMA's chipcommon nand flash driver to detect which
chip-select is used and pass that information via platform data to the
brcmnand driver. Make sure that the brcmnand platform data structure is
always at the beginning of the platform data of the "nflash" device
created by BCMA to allow brcmnand to safely de-reference it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-7-f.fainelli@gmail.com
This commit is contained in:
Florian Fainelli 2022-01-07 10:46:11 -08:00 committed by Miquel Raynal
parent f5619f3774
commit 02d1d0e4df
4 changed files with 37 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
MAINTAINERS
View File

@ -4021,6 +4021,7 @@ L: linux-mtd@lists.infradead.org
L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: drivers/mtd/nand/raw/brcmnand/
F: include/linux/platform_data/brcmnand.h
BROADCOM STB PCIE DRIVER
M: Jim Quinlan <jim2101024@gmail.com>

20
drivers/bcma/driver_chipcommon_nflash.c
View File

@ -7,18 +7,28 @@
#include "bcma_private.h"
#include <linux/bitops.h>
#include <linux/platform_device.h>
#include <linux/platform_data/brcmnand.h>
#include <linux/bcma/bcma.h>
/* Alternate NAND controller driver name in order to allow both bcm47xxnflash
* and bcma_brcmnand to be built into the same kernel image.
*/
static const char *bcma_nflash_alt_name = "bcma_brcmnand";
struct platform_device bcma_nflash_dev = {
.name = "bcma_nflash",
.num_resources = 0,
};
static const char *probes[] = { "bcm47xxpart", NULL };
/* Initialize NAND flash access */
int bcma_nflash_init(struct bcma_drv_cc *cc)
{
struct bcma_bus *bus = cc->core->bus;
u32 reg;
if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 &&
cc->core->id.rev != 38) {
@ -33,8 +43,16 @@ int bcma_nflash_init(struct bcma_drv_cc *cc)
cc->nflash.present = true;
if (cc->core->id.rev == 38 &&
(cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT))
(cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT)) {
cc->nflash.boot = true;
/* Determine the chip select that is being used */
reg = bcma_cc_read32(cc, BCMA_CC_NAND_CS_NAND_SELECT) & 0xff;
cc->nflash.brcmnand_info.chip_select = ffs(reg) - 1;
cc->nflash.brcmnand_info.part_probe_types = probes;
cc->nflash.brcmnand_info.ecc_stepsize = 512;
cc->nflash.brcmnand_info.ecc_strength = 1;
bcma_nflash_dev.name = bcma_nflash_alt_name;
}
/* Prepare platform device, but don't register it yet. It's too early,
* malloc (required by device_private_init) is not available yet. */

5
include/linux/bcma/bcma_driver_chipcommon.h
View File

@ -3,6 +3,7 @@
#define LINUX_BCMA_DRIVER_CC_H_
#include <linux/platform_device.h>
#include <linux/platform_data/brcmnand.h>
#include <linux/gpio.h>
/** ChipCommon core registers. **/
@ -599,6 +600,10 @@ struct bcma_sflash {
#ifdef CONFIG_BCMA_NFLASH
struct bcma_nflash {
/* Must be the fist member for the brcmnand driver to
* de-reference that structure.
*/
struct brcmnand_platform_data brcmnand_info;
bool present;
bool boot; /* This is the flash the SoC boots from */
};

12
include/linux/platform_data/brcmnand.h Normal file
View File

@ -0,0 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef BRCMNAND_PLAT_DATA_H
#define BRCMNAND_PLAT_DATA_H
struct brcmnand_platform_data {
int chip_select;
const char * const *part_probe_types;
unsigned int ecc_stepsize;
unsigned int ecc_strength;
};
#endif /* BRCMNAND_PLAT_DATA_H */