dt-bindings: net: qcom,ethqos: Convert bindings to yaml
Convert Qualcomm ETHQOS Ethernet devicetree binding to YAML. In doing so add a new property for iommus since newer platforms support using one, and without such make dtbs_check fails on them. While at it, also update the MAINTAINERS file to point to the yaml version of the bindings. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> [halaney: Remove duplicated properties, add MAINTAINERS and iommus] Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This commit is contained in:
parent
d70c215bdd
commit
02e98ce3db
@ -1,66 +0,0 @@
|
||||
Qualcomm Ethernet ETHQOS device
|
||||
|
||||
This documents dwmmac based ethernet device which supports Gigabit
|
||||
ethernet for version v2.3.0 onwards.
|
||||
|
||||
This device has following properties:
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: Should be one of:
|
||||
"qcom,qcs404-ethqos"
|
||||
"qcom,sm8150-ethqos"
|
||||
|
||||
- reg: Address and length of the register set for the device
|
||||
|
||||
- reg-names: Should contain register names "stmmaceth", "rgmii"
|
||||
|
||||
- clocks: Should contain phandle to clocks
|
||||
|
||||
- clock-names: Should contain clock names "stmmaceth", "pclk",
|
||||
"ptp_ref", "rgmii"
|
||||
|
||||
- interrupts: Should contain phandle to interrupts
|
||||
|
||||
- interrupt-names: Should contain interrupt names "macirq", "eth_lpi"
|
||||
|
||||
Rest of the properties are defined in stmmac.txt file in same directory
|
||||
|
||||
|
||||
Example:
|
||||
|
||||
ethernet: ethernet@7a80000 {
|
||||
compatible = "qcom,qcs404-ethqos";
|
||||
reg = <0x07a80000 0x10000>,
|
||||
<0x07a96000 0x100>;
|
||||
reg-names = "stmmaceth", "rgmii";
|
||||
clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
|
||||
clocks = <&gcc GCC_ETH_AXI_CLK>,
|
||||
<&gcc GCC_ETH_SLAVE_AHB_CLK>,
|
||||
<&gcc GCC_ETH_PTP_CLK>,
|
||||
<&gcc GCC_ETH_RGMII_CLK>;
|
||||
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq", "eth_lpi";
|
||||
snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
|
||||
snps,txpbl = <8>;
|
||||
snps,rxpbl = <2>;
|
||||
snps,aal;
|
||||
snps,tso;
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "rgmii";
|
||||
|
||||
mdio {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
phy1: phy@4 {
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0x4>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
110
Documentation/devicetree/bindings/net/qcom,ethqos.yaml
Normal file
110
Documentation/devicetree/bindings/net/qcom,ethqos.yaml
Normal file
@ -0,0 +1,110 @@
|
||||
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm Ethernet ETHQOS device
|
||||
|
||||
maintainers:
|
||||
- Bhupesh Sharma <bhupesh.sharma@linaro.org>
|
||||
|
||||
description:
|
||||
dwmmac based Qualcomm ethernet devices which support Gigabit
|
||||
ethernet (version v2.3.0 and onwards).
|
||||
|
||||
allOf:
|
||||
- $ref: snps,dwmac.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,qcs404-ethqos
|
||||
- qcom,sm8150-ethqos
|
||||
|
||||
reg:
|
||||
maxItems: 2
|
||||
|
||||
reg-names:
|
||||
items:
|
||||
- const: stmmaceth
|
||||
- const: rgmii
|
||||
|
||||
interrupts:
|
||||
items:
|
||||
- description: Combined signal for various interrupt events
|
||||
- description: The interrupt that occurs when Rx exits the LPI state
|
||||
|
||||
interrupt-names:
|
||||
items:
|
||||
- const: macirq
|
||||
- const: eth_lpi
|
||||
|
||||
clocks:
|
||||
maxItems: 4
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: stmmaceth
|
||||
- const: pclk
|
||||
- const: ptp_ref
|
||||
- const: rgmii
|
||||
|
||||
iommus:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- clocks
|
||||
- clock-names
|
||||
- reg-names
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/qcom,gcc-qcs404.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
ethernet: ethernet@7a80000 {
|
||||
compatible = "qcom,qcs404-ethqos";
|
||||
reg = <0x07a80000 0x10000>,
|
||||
<0x07a96000 0x100>;
|
||||
reg-names = "stmmaceth", "rgmii";
|
||||
clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
|
||||
clocks = <&gcc GCC_ETH_AXI_CLK>,
|
||||
<&gcc GCC_ETH_SLAVE_AHB_CLK>,
|
||||
<&gcc GCC_ETH_PTP_CLK>,
|
||||
<&gcc GCC_ETH_RGMII_CLK>;
|
||||
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq", "eth_lpi";
|
||||
|
||||
rx-fifo-depth = <4096>;
|
||||
tx-fifo-depth = <4096>;
|
||||
|
||||
snps,tso;
|
||||
snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 10000>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ðernet_defaults>;
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "rgmii";
|
||||
mdio {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
|
||||
compatible = "snps,dwmac-mdio";
|
||||
phy1: phy@4 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0x4>;
|
||||
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
@ -17304,7 +17304,7 @@ M: Vinod Koul <vkoul@kernel.org>
|
||||
R: Bhupesh Sharma <bhupesh.sharma@linaro.org>
|
||||
L: netdev@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/net/qcom,ethqos.txt
|
||||
F: Documentation/devicetree/bindings/net/qcom,ethqos.yaml
|
||||
F: drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
|
||||
|
||||
QUALCOMM FASTRPC DRIVER
|
||||
|
Loading…
x
Reference in New Issue
Block a user