serial: uartps: Fix stuck ISR if RX disabled with non-empty FIFO
commit 7abab1605139bc41442864c18f9573440f7ca105 upstream. If RX is disabled while there are still unprocessed bytes in RX FIFO, cdns_uart_handle_rx() called from interrupt handler will get stuck in the receive loop as read bytes will not get removed from the RX FIFO and CDNS_UART_SR_RXEMPTY bit will never get set. Avoid the stuck handler by checking first if RX is disabled. port->lock protects against race with RX-disabling functions. This HW behavior was mentioned by Nathan Rossi in 43e98facc4a3 ("tty: xuartps: Fix RX hang, and TX corruption in termios call") which fixed a similar issue in cdns_uart_set_termios(). The behavior can also be easily verified by e.g. setting CDNS_UART_CR_RX_DIS at the beginning of cdns_uart_handle_rx() - the following loop will then get stuck. Resetting the FIFO using RXRST would not set RXEMPTY either so simply issuing a reset after RX-disable would not work. I observe this frequently on a ZynqMP board during heavy RX load at 1M baudrate when the reader process exits and thus RX gets disabled. Fixes: 61ec9016988f ("tty/serial: add support for Xilinx PS UART") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
bf20b9d833
commit
03b0466e03
@ -362,7 +362,13 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
|
||||
cdns_uart_handle_tx(dev_id);
|
||||
isrstatus &= ~CDNS_UART_IXR_TXEMPTY;
|
||||
}
|
||||
if (isrstatus & CDNS_UART_IXR_RXMASK)
|
||||
|
||||
/*
|
||||
* Skip RX processing if RX is disabled as RXEMPTY will never be set
|
||||
* as read bytes will not be removed from the FIFO.
|
||||
*/
|
||||
if (isrstatus & CDNS_UART_IXR_RXMASK &&
|
||||
!(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS))
|
||||
cdns_uart_handle_rx(dev_id, isrstatus);
|
||||
|
||||
spin_unlock(&port->lock);
|
||||
|
Loading…
x
Reference in New Issue
Block a user